Industry Standard Compliance
ACPI 1.0b Compliant PCI-X and PCI 2.2 Compliant PAE Support Microsoft Logo certifications

Page 6

Intelligent Manageability HP Systems Insight Manager Remote Insight Lights-Out Edition ll (optional) ROM-Based Setup Utility (RBSU) Integrated Management Display (IMD) Server Health logging Automatic Server Recovery-2 (ASR-2) System Interconnect Status Indicators Remote-Flash Redundant ROM Hot Spare Boot NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will automatically reboot and use the remaining good processor(s). Power Down Utility Power Supply Viewer Pre-Failure Warranty (covers processors, as well as SCSI hard drives and memory)

Availability

Hot Plug RAID Memory using Industry Standard ECC Memory PCI-X/PCI Hot Plug with push button functionality Redundant Hot Plug Fans Dynamic sector repairing and drive parameter tracking (with Smart Array controllers) Fault Tolerant Processor Power Modules Redundant/adaptive load balancing NIC Support Redundant Hot Plug Power Supplies

Security

Power-on password Diskette drive control Diskette boot control Network server mode Security provision Parallel and serial interface control Administrator's password Disk configuration lock Hot plug access security

Server Power Cords

Two Highline IEC to IEC power cords (PDU adapters) ships standard
UPS and PDU Power Cord Matrix
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units. ftp://ftp.compaq.com/pub/products/servers/ProLiantstorage/power-protection/powercordmatrix.pdf.

Power Supply

Two Redundant Hot Plug 1150/500-Watt power supplies per system. Power supplies are load sharing and provide 1150 Watts of Redundant power for 220-volt input or 500 Watts of Redundant power for 110-volt input. NOTE: To ensure redundancy of server power, HP requires that 200-240 VAC power be used for all deployments. This will ensure that both power supplies can support up to their maximum configurations, and remain in a redundant power supply state. NOTE: A maximum of two power supplies are supported and ship standard with each server.

Page 7

System Fans
Two Hot-Plug redundant fans ship standard. Two maximum supported.

Required Cabling

For required cabling information, refer to the Web site at: http://hp.com/products/servers/ProLiantDL760.

OS Support

Microsoft Windows 2000 Microsoft Windows 2000 Advanced Server Microsoft Windows Server 2003 (Standard, and Enterprise) SCO UnixWare LINUX (Red Hat, SuSE) VMware Virtualization Software NOTE: For a more complete and up-to-date listing of supported OS's and versions, please visit our OS Support Matrix at: http://www.hp.com/go/supportos. NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant DL760 G2, please see: http://h18023.www1.hp.com/support/files/server/us/index.html. NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web site at http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html. NOTE: For more complete and up-to-date information on how to buy server operating systems from HP please visit the OS product site at: http://h18004.www1.hp.com/products/servers/software/OEM.html NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware Server Support Matrix at: http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html.

Rack Airflow Requirements
Rack 10000 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors. CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment: Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm). CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage. NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: http://h18000.www1.hp.com/products/servers/ProLiantdl760/index.html. NOTE: Allow a minimum of 48 in (121.92 cm) clearance beyond the front of your rack to permit server installation and removal. This applies to both individual rack installations as well as when aligning rack rows so that the front doors are facing each other.

Page 8

Factory Express Portfolio for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches. For more information on Factory Express services for your specific server model please contact your sales representative or go to http://www.hp.com/go/factory-express.

Custom Builder

Please see the Enterprise Configurator for configuration assistance at: http://www.hp.com/products/configurator.

372906-B21

397004-B21

306696-B21

267196-B21 267196-291

303284-B21

372214-B21

Page 12

NOTE: For additional ProLiant Essentials Virtualization Management Software License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.HTML ProLiant Essentials Vulnerability and Patch Management Pack ProLiant Essentials Vulnerability and Patch Management Pack, Single-Server License NOTE: For use with a single server. Contains one license with a unique license activation key and documentation. NOTE: For additional ProLiant Vulnerability and Patch Management Pack License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12111_div/12111_div.HTML NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information. NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials.

371645-B21

NetServer to ProLiant integrations services
HP NetServer to ProLiant integration and assessment service NOTE: HP identifies current levels of NetServer support, services, and management. This service helps maximize customers ability to add ProLiant platforms into their current environment. HP TopTools to Insight Manager 7 installation and startup service NOTE: Provides on-site review, installation and configuration services for Insight Manager 7. HP will also re-create, as closely as possible, the views and reports from the customers current TopTools configuration. This service assures a smooth transition to the ProLiant Essentials software. HP NetServer to ProLiant Essentials Rapid Deployment Pack installation and startup service NOTE: Install and configure Rapid Deployment Pack in a test environment, then deploy a server image to a maximum of 250 systems in the production environment. This service helps to assure successful system deployment.

304164-002

304163-002

304162-002

Page 13

Processor

NOTE: Intel Xeon 3.0 GHz/4MB, 2.7 GHz/2MB, 2.2 GHz/2MB, 2.8 GHz/2MB, 2.5 GHz/1MB, 2.0 GHz/2MB, 2.0 GHz/1MB, and 1.5 GHz/1MB processors cannot be mixed in the same server. They all have to be of the same speed. (4) Intel Xeon MP 3.0 GHz -4MB Processor Option Kit NOTE: This processor option kit (PN 351050-B21) supports the HP ProLiant DL760 G2 and the HP ProLiant DL740 servers. This option kit contains 4 x Intel Xeon MP 3.0GHz/4MB processors. (4) Intel Xeon MP 2.70 GHz -2MB Processor Option Kit NOTE: This processor option kit (PN 351051-B21) supports the HP ProLiant DL760 G2 and the HP ProLiant DL740 servers. This option kit contains 4 x Intel Xeon MP 2.70 GHz/2MB processors. (4) Intel Xeon MP 2.20 GHz -2MB Processor Option Kit NOTE: This processor option kit (PN 351052-B21) supports the HP ProLiant DL760 G2 and the HP ProLiant DL740 servers. This option kit contains 4 x Intel Xeon MP 2.20 GHz/2MB processors. (4) Intel Xeon MP 2.80 GHz -2MB Processor Option Kit NOTE: This processor option kit (PN 334037-B21) supports the HP ProLiant DL760 G2 and the HP ProLiant DL740 servers. This option kit contains 4 x Intel Xeon MP 2.80 GHz-2MB processors. (4) Intel Xeon MP 2.50 GHz-1MB Processor Option Kit NOTE: This processor option kit (PN 339072-B21) supports the HP ProLiant DL760 G2 and HP ProLiant DL740 servers. This option kit contains 4 x Intel Xeon MP 2.50 GHz-1MB processors. (4) Intel Xeon MP 2.0 GHz-1MB Processor Option Kit NOTE: This processor option kit (PN 334036-B21) supports the HP ProLiant DL760 G2 and HP ProLiant DL740 servers. This option kit contains 4 x Intel Xeon MP 2.0 GHz-1MB processors. (4) Intel Xeon MP 2.0 GHz -2MB Processor Option Kit NOTE: This processor option kit (PN 287520-B21) supports the HP ProLiant DL760 G2 and the HP ProLiant DL740 servers. This option kit contains 4 x Intel Xeon MP 2.0 GHz-2MB processors. (4) Intel Xeon MP 1.50 GHz-1MB Processor Option Kit NOTE: This processor option kit (PN 287519-B21) supports the HP ProLiant DL760 G2 and HP ProLiant DL740 servers. This option kit contains 4 x Intel Xeon MP 1.50 GHz-1MB processors.

351050-B21

351051-B21

351052-B21

334037-B21

339072-B21

334036-B21

287520-B21

287519-B21

Memory (SDRAM DIMMs)

2048 MB 133MHz ECC SDRAM Memory Option Kit (1 x 2048 MB) NOTE: A ROM dated later than 2/14/2003 is needed to use 2 GB DIMMs. 1024 MB 133MHz ECC SDRAM Memory Option Kit (1 x 1024 MB) 512 MB 133MHz ECC SDRAM Memory Option Kit (1 x 512 MB) 256 MB 133MHz ECC SDRAM Memory Option Kit (1 x 256 MB) NOTE: Memory must be populated in banks of 10. (2 per memory cartridge x 5 cartridges.) All DIMMs in a bank must be the same sku number.
317093-B21 236854-B21 236853-B21 236852-B21

Optical Drives

8x CD/DVD-ROM Drive Option Kit

337057-B21

Page 14

Hard Drives

Ultra320 SCSI Universal Hot Plug
HP 300GB U320 10K Universal HDD HP 146GB U320 10K Universal HDD HP 72GB U320 10K Universal HDD HP 146GB U320 15K Universal HDD HP 72GB U320 15K Universal HDD HP 36GB U320 15K Universal HDD NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates. NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature: http://h18000.www1.hp.com/products/quickspecs/11531_div/11531_div.HTML (Worldwide) 350964-B22 286716-B22 286714-B22 347708-B22 286778-B22 286776-B22
Smart Array 6402/128 Controller Smart Array 6404/256 Controller 512MB DDR BBWC Upgrade Smart Array 641 Controller Smart Array 642 Controller 128MB Battery-Backed Cache Enabler NOTE: This 128MB BBWC supports the Smart Array 641 Controller and Smart Array 642 Controller. 256-MB Battery-Backed Cache Module NOTE: This 256-MB Battery-Backed Cache Module supports the Smart Array 5300 series controllers, HP StorageWorks Modular Smart Array 1000 and the HP StorageWorks Modular Smart Array 500. 64-Bit/133MHz Dual Channel Ultra320 SCSI Adapter (The 64-bit/133-MHz Dual Channel Wide Ultra320 SCSI Adapter (268351-B21) will default to Wide Ultra2 when not used with the Wide Ultra3 hard drives.) Ultra320 Expansion Module for SA-6402 NOTE: Please see the following Controller or SCSI Adapter QuickSpecs for Technical Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and additional information: http://h18000.www1.hp.com/products/quickspecs/11587_div/11587_div.HTML (Smart Array 6400 Series) http://h18000.www1.hp.com/products/quickspecs/12067_div/12067_div.HTML (Smart Array 641) http://h18000.www1.hp.com/products/quickspecs/12069_div/12069_div.HTML (Smart Array 642) http://h18000.www1.hp.com/products/quickspecs/10429_div/10429_div.HTML (SCSI Adapter) http://h18000.www1.hp.com/products/quickspecs/11555_div/11555_div.HTML (U320 Adapter)

273915-B21 273914-B21 372538-B21 291966-B21 291967-B21 351580-B21

254786-B21

268351-B21

273911-B21

Page 15

Communications

HP NC310F PCI-X 1000SX Gigabit Server Adapter HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter HP NC7771 PCI-X 1000T Gigabit Server Adapter HP NC570C PCI-X Dual-port 4x Fabric Adapter HP 24-Port 4x Fabric Copper Switch HP 1m 4x Fabric Copper Cable HP 3m 4x Fabric Copper Cable HP 5m 4x Fabric Copper Cable
368169-B21 313881-B21 290563-B21 376158-B21 376227-B21 376232-B21 376232-B22 376232-B23

Redundant Options

1150/500-Watt Hot Plug N 1 redundant power supply (North America) 1150/500-Watt Hot Plug N 1 redundant power supply (Intl) 1150/500-Watt Hot Plug N 1 redundant power supply (Japan) NOTE: A maximum of two power supplies are supported by the HP ProLiant DL760 G2 (shipped standard with each server).
401231-001 401231-B31 401231-291

Management Options

Remote Insight Lights-Out Edition II (NA, LA) Remote Insight Lights-Out Edition II (EMEA) Remote Insight Lights-Out Edition II (ROW)
227251-001 227251-021 227251-371

Tape Drives

NOTE: For the complete listing of Tape Drive offerings for this server, please visit: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html For recommended tape drive offerings for this ProLiant server see the following: Hot Plug Tape Drives HP StorageWorks DAT 72 SCSI Hot-plug Tape Drive (Carbon) USB Tape Drives HP StorageWorks DAT 72 USB External Tape Drive (Carbonite) External and Rack-Mount Ultrium Tape Drives HP StorageWorks Ultrium 232 Internal Tape Drive (Carbonite) NOTE: No internal tape drives fit inside this HP ProLiant server (except hot plug tape). The internal drive shown here is for the 1U and 3U Rack-mount Kit. HP StorageWorks Ultrium 232 External Tape Drive (Carbonite) HP StorageWorks Ultrium 448 External Tape Drive (Carbonite) HP StorageWorks Ultrium 960 External Tape Drive (Carbonite) HP StorageWorks 3U Rack-mount kit with one Ultrium 960 (Carbonite) NOTE: Please see the HP StorageWorks Ultrium Tape Drive QuickSpecs for additional options such as controllers, media, and other related items: http://h18006.www1.hp.com/products/quickspecs/11739_div/11739_div.html (Worldwide) For an up-to-date listing of the latest O/S and software support details for HP Ultrium tape drives, please visit: http://www.hp.com/go/connect. Rack-Mount Tape Drive Enclosures

Q1529A DW027A DW064A

DW065B DW017B Q1539B Q1595A

Page 16

HP StorageWorks 1U Rack-Mount Kit NOTE: NOTE The 1U Rack-mount Kit can support up to (2) half-height tape drives and compatible with multiple Single-Ended and LVD SCSI tape drives including the DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160, Ultrium 215, Ultrium 232 and Ultrium 448 tape drives. HP StorageWorks 1U USB Rack-Mount Kit 1U USB Cable Option Kit NOTE: Converts a 1U SCSI rack-mount kit to a USB interface to support the USB tape drives. HP StorageWorks 3U Rack-Mount Kit NOTE: The 3U Rack-mount Kit can support up to (2) full-height or (4) half-height tape drives and compatible with multiple Single-Ended and LVD SCSI tape drives including DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160, SDLT 320, SDLT 600, Ultrium 215, Ultrium 230, Ultrium 232, Ultrium 460, Ultrium 448 and Ultrium 960 tape drives. NOTE: Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional information regarding these kits: http://h18000.www1.hp.com/products/quickspecs/10854_div/10854_div.HTML (Worldwide)

A7445B

A8007A 396114-B21

274338-B22

Tape Autoloaders
DAT Autoloader HP StorageWorks DAT 72x6 Autoloader (External) NOTE: Please see the DAT Tape Autoloader QuickSpecs for additional options such as host bus adapters, controllers and media: http://h18000.www1.hp.com/products/quickspecs/11985_div/11985_div.HTML (Worldwide) HP StorageWorks 1/8 Tape Autoloader HP StorageWorks 1/8 Ultrium 960 Tape Autoloader HP StorageWorks 1/8 Ultrium 448 Tape Autoloader HP StorageWorks 1/8 Ultrium 232 Tape Autoloader 1/8 Tape Autoloader Rackmount Kit NOTE: Required to install the unit in a standard 19-inch rack; includes rails and rackmount instructions. NOTE: Please reference the 1/8 Tape Autoloader QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http://www.hp.com/go/ebs.

Q1567A

AF204A AF203A AF202A C9268R

Page 17

Tape Libraries
HP StorageWorks MSL2024 Tape Library HP StorageWorks MSLUltrium 960 Drive Library HP StorageWorks MSLUltrium 448 Drive Library HP StorageWorks MSLUltrium 448 Drive Library HP StorageWorks MSL4048 Tape Library HP StorageWorks MSLUltrium 448 Drive Library HP StorageWorks MSLUltrium 448 Drive Library HP StorageWorks MSLUltrium 960 Drive Library HP StorageWorks MSLUltrium 960 Drive Library HP StorageWorks MSL6000 Tape Library Ultrium 960 technology HP StorageWorks MSLUltrium 960 Dr LVDS Library HP StorageWorks MSLUltrium 960 Dr FC Library HP StorageWorks MSLUltrium 960 Dr LVDS Library HP StorageWorks MSLUltrium 960 Dr FC Library Ultrium 460 technology HP StorageWorks MSLUltrium 460 Dr LVDS Library HP StorageWorks MSLUltrium 460 Dr FC Library HP StorageWorks MSLUltrium 460 Dr LVDS Library HP StorageWorks MSLUltrium 460 Dr FC Library NOTE: Please reference the MSL2024, MSL4048 and MSL6000 Tape Library QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http://www.hp.com/go/ebs. HP StorageWorks 9.1 GB Optical Jukeboxes 600mx, 4 drive, 64 slot jukebox 1200mx, 4 drive, up to 128 slots 2200mx, 6 drive, up to 238 slots NOTE: Please see the HP StorageWorks Magneto-Optical Products data sheet for a complete listing of available jukeboxes at: http://www.hp.com/products1/storage/products/archivalprod/brochures/ MO_family_pb.pdf NOTE: Please reference the Magneto-Optical Jukebox data sheets at http://www.hp.com/go/optical for additional information needed to create a complete solution. 1900ux, 4 drive, 64 slot jukebox 3800ux, 4 drive, 128 slot jukebox 7100ux, 6 drive, 238 slot jukebox NOTE: Please see the HP StorageWorks Ultra Density Optical Jukeboxes QuickSpecs for a complete listing of available jukeboxes at: http://h18006.www1.hp.com/products/quickspecs/11944_div/11944_div.html NOTE: Please reference the Ultra Density Optical Jukebox QuickSpecs at http://www.hp.com/go/optical for additional information needed to create a complete solution.

AG115A AG116A AG117A AG320A AG321A AG322A AG323A
AD606A AD608A AD607A AD609A AD598A AD600A AD599A AD601A
Magneto-Optical Jukeboxes

C1160M C1104M C1107M

Ultra Density Optical Jukeboxes

AA966A AA969A AA971A

Page 18
HP Data Protector Express HP DP Express Backup Server Upgrade for ProLiant Software Software HP DP Express Package for Microsoft Small Business Server NOTE: Please see the HP Data Protector Express QuickSpecs for additional information regarding the purchase of HP Data Protector Express software: http://h18000.www1.hp.com/products/quickspecs/12337_div/12337_div.html (Worldwide)

BB117AP BB118AA

HP StorageWorks Modular Smart Array 20
HP StorageWorks Modular Smart Array 20 NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies. HP StorageWorks Modular Smart Array 20 Starter Kit NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies. Includes Smart Array 6402/128 Controller. NOTE: The Modular Smart Array Enclosure 20 Family supports the SATA 1.5Gb/s 3.5" Hot Plug Hard Drives.

335921-B21

366172-B21
HP StorageWorks Modular Smart Array 30
HP StorageWorks Modular Smart Array 30 SB NOTE: Rack-mountable 14 drive enclosure with single bus, redundant power supplies. HP StorageWorks Modular Smart Array 30 DB NOTE: Rack-mountable 14 drive enclosure with dual bus, redundant power supplies. NOTE: The Modular Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320 Hot Plug Hard Drives.

302969-B21

302970-B21
HP StorageWorks Modular Smart Array 500 Generation 2 HP StorageWorks Modular Smart Array 500 NOTE: Please see the Modular Smart Array 500 Generation 2 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11956_div/11956_div.HTML (Worldwide)

335880-B21

HP StorageWorks Modular Smart Array 1000
HP StorageWorks Modular Smart Array 1000 NOTE: Please see the Modular Smart Array 1000 QuickSpecs for additional options and configuration information at http://h18000.www1.hp.com/products/quickspecs/11033_div/11033_div.HTML (Worldwide)

201723-B22

HP StorageWorks Modular Smart Array 1500 cs
Modular Smart Array 1500 Controller Shelf NOTE: Please see the StorageWorks Modular SAN Array 1500 cs QuickSpecs for additional options and configuration information at: http://www.hp.com/go/MSA1500cs

AA986A

Page 19

Cluster Options

ProLiant Cluster Starter Kit NOTE: For additional information regarding the ProLiant Cluster Starter Kit please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11935_div/11935_div.html (Worldwide) HP HA/F200 for Entry SAN Cluster HP HA/F200 for Entry SAN Cluster (Japan) NOTE: For additional information regarding the ProLiant Cluster for Entry Level SAN please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11932_div/11932_div.html (Worldwide) ProLiant Cluster HA/F500 for the Enterprise SAN NOTE: For additional information regarding the ProLiant Cluster HA/F500 for Enterprise SAN please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11933_div/11933_div.html (Worldwide) HP Serviceguard for Linux ProLiant Cluster A.11.16 for SUSE SLES 9 and Red Hat EL 3 & 4 (2 node license cluster kit) HP Serviceguard for Linux A.11.16 for SUSE SLES9 and Red Hat EL 3 & 4 (single license version) HP Serviceguard for Linux and Red Hat Global File System - 1 year subscription HP Serviceguard for Linux and Red Hat Global File System - 3 years subscription NOTE: For additional information regarding HP Serviceguard for Linux, please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11518_div/11518_div.html (Worldwide)

364023-B21

364026-B22 364026-292

364024-B21

305199-B26 307754-B26 T2798AA#001 T2798AA#003
Uninterruptible Power Systems Rack Mountable
HP UPS R1500 XR (1440VA, 1340 Watt), Low Voltage (NA) HP UPS R1500 XR (1500VA, 1340 Watt), High Voltage (Intl) HP UPS R1500 XR (1500VA, 1340 Watt), Low Voltage (Japan) HP UPS R3000 XR (2880VA, 2700 Watt), Low Voltage (NA) HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (NA) HP UPS R3000 XR (2400VA, 2250 Watt), Low Voltage (Japan) HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (Japan) HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (Intl - detachable cord) HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A IEC309 Plug) HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A CEE 7/7 SCHUKO Plug) HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A BS-546 Plug) HP UPS R5500 XR, (5000VA, 4500 Watt), High Voltage (NA/Jpn) HP UPS R5500 XR, (6000VA, 5400 Watt), High Voltage (Int'l) UPS R12000 XR N+x (200-240V) (WW-hardwired) NOTE: The UPS R12000 XR has a hardwired input and output; requires a 100A circuit.
204404-001 204404-B31 204404-291 192186-001 192186-002 192186-291 192186-292 192186-B31 192186-B32 192186-B33 192186-AR1 326529-D71 326529-B31 207552-B22

Page 20

HP Monitored Power Distribution Unit (PDU)
HP Monitored Power Distribution Unit: Full Rack Version HP 17.3 kVA S2324 Monitored PDU- dual input, 3-phase, 24A (NA/JPN) HP 8.3 kVA S1324 Monitored PDU- single input, 3-phase, 24A (NA/JPN) HP 16.6 kVA S2140 Monitored PDU- dual input, 1-phase, 40A (NA/JPN) HP 8.6 S1140 Monitored PDU- single input, 1-phase, 40A (NA/JPN) HP 22.1 kVA S2316 Monitored PDU- dual input, 3-phase, 16A (INTL) HP 11 kVA S 1316 Monitored PDU- single input, 3-phase, 16A (INTL) HP 14.7 kVA S2132 Monitored PDU- dual input, 1-phase, 32A (INTL) HP 7.4 kVA S1132 Monitored PDU- single input, 1-phase, 32A (INTL) HP Monitored Power Distribution Unit: Half Rack Version HP 17.3 kVA S348 Monitored PDU- single input, 3-phase, 60A (NA/JPN) HP 22 kVA S332 Monitored PDU- single input, 3-phase, 32A (INTL)
370959-D71 370960-D71 370961-D71 370962-D71 370963-B31 370964-B31 370965-B31 370966-B31 AF916A AF917A
Modular PDUs 1U/0U (Up to 32 outlets) NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 and 9000 series racks).
HP Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127 VAC) (NA, Japan) NOTE: This mPDU (252663-D71) may also be used to connect the low volt model of the UPS R3000 XR. HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC) (NA, Japan) HP Modular Power Distribution Units (mPDU), High Volt Model, 32A (200-240 VAC) (Intl) HP Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240 VAC) (WW) NOTE: NOTE This mPDU (252663-B21), 40A model has a hardwired input. HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW) NOTE: This PDU has a detachable input power cord and allows for adaptability to country specific power requirements. This model may also be used with the high volt UPSs R3000 XR and R6000 For North America, need to order cable PN 340653001. HP Modular Power Distribution Unit (mPDU), High Volt Model, 40A, Attached Cord, (NA/JPN) HP Modular Power Distribution Unit (mPDU), High Volt Model, 40A, Attached Cord, (Int'l) NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs) QuickSpecs for additional options including shorter jumper cables and country specific power cords: http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.HTML (Worldwide)

252663-D71

252663-D72 252663-B31 252663-B21

252663-B24

252663-D73 252663-B32

Page 21

Third Party Rack Kit
Rack Adapter Kit NOTE: This kit allows HP rack servers to fit in racks that are 24" wide. Third Party Rack Kit NOTE: The Third party rack kit supports the HP ProLiant ML530 G2, HP ProLiant ML570 G2, HP ProLiant DL740, and HP ProLiant DL760 G2. Provides support for any rack, square hole or round hole (including HP Rack System /E and HP Systems) with an adjustment range from 23 " 34" deep. NOTE: The Third Party Rack Kit is required for round hole racks or for square hole racks that do not conform to the adjustment range of the standard rail that ships with the server. Telco Rack Support NOTE: Support for all 2-post Telco racks requires the Third Party Rack Kit (PN 274739-B21) kit plus an additional option kit from Rack Solutions. The Rack Solutions brackets can be purchased at: http://www.racksolutions.com/compaq.

379006-001 379005-001 292302-B22 257415-B21 257415-B22 245160-B21 245160-B23 245161-B21 245161-B22 245161-B23 245162-B21 245162-B22 245162-B23 245163-B21 245163-B22 245163-B23
Keyboards and Monitors TFT7210R Rack Mounted 17" Monitor NOTE: For a complete list of Monitors please view the following URL: http://www.hp.com/go/kvm. TFT7600RKM US TFT7600RKM UK TFT7600RKM GR TFT7600RKM FR TFT7600RKM IT TFT7600RKM SP TFT7600RKM DEN TFT7600RKM NOR TFT7600RKM SE/FI TFT7600RKM SWI TFT7600RKM PORT TFT7600RKM BEL TFT7600RKM JPN2 TFT7600RKM RUS TFT7600RKM INTL

348373-B21

AG052A AG053A AG054A AG055A AG056A AG057A AG058A AG059A AG060A AG061A AG062A AG063A AG064A AG065A AG066A

Page 23

1U Rack Keyboard & Drawer (Carbon) Country Code Key (for 1U Rack Keyboard & Drawer (PN 257054-xx1)) XX = 001 XX = 031 XX = 041 XX = 051 XX = 061 XX = 071 XX = 081 US UK Germany France Italy Spain Denmark XX = 091 XX = 101 XX = 111 XX = 131 XX = 181 XX = 291 XX = B31 Norway Sweden/Finland Switzerland Portugal Belgium Japan International

257054-xx1

NOTE: For additional information regarding Rack Options, please see the following URL: http://www.hp.com/go/rackandpower.

HP KVM Switch Options

IP Console Switch Box (KVM/IP), 3 x 1 x 16 IP Console Switch Box (KVM/IP), 1 x 1 x 16 Server Console Switch (KVM), 0 x 1 x 8 port Server Console Switch (KVM), 0 x 2 x 16 port PS/2 Interface Adapter, 1 pack PS/2 Interface Adapter, 8 pack USB Interface Adapter, 1 pack Serial Interface adapter - 1 Pack with power supply NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm. HP 1x 4 USB/PS2 KVM Switch, TT (NA/JPN) HP 1x 4 USB/PS2 KVM Switch, TT (AU/NZ) HP 1x 4 USB/PS2 KVM Switch, TT (UK) HP 1x 4 USB/PS2 KVM Switch, TT (EU) HP 1x 4 USB/PS2 KVM Switch, RM (ALL) HP PS2 KVM Cable with audio, 6', 2-pack HP USB KVM Cable with audio, 6', 2-pack NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
262586-B21 262585-B21 336044-B21 336045-B21 262588-B21 262587-B21 336047-B21 373035-B21
371301-D71 371301-011 371301-031 371301-A21 371302-B21 371730-B21 371729-B21

Page 24

HP Serial Console Server HP 16 Port Serial Console Server (worldwide) Options HP 48 Port Serial Console Server (worldwide) Serial Adapter, RJ45-DB9 DCE Female, 1 Pack Serial Adapter, RJ45-DB9 DCE Female, 8 Pack NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console Servers. Additional Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm. NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
AF101A AF102A AF103A AF110A
Service and Support Hardware Services On-site Service Offerings (HP Care Pack 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic Services) 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic Installation & Start-up Services Hardware Installation, Electronic Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am5pm, M-F, excl. HP holidays, Electronic Support Plus Onsite HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays, Electronic Onsite HW support, 8am-9pm, M-F, 4hr response and Linux O/S SW Tech support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays, Electronic Support Plus 24 Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic Onsite HW support 24x7, 4hr response and SuSE Linux SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic 6-Hour Call to Repair, On-site Service 7-Day x 24-Hour Coverage, 3 Years 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack.
U4623E U4624E U4633E U4634E

U4635E

U4637E

U4636E U4638E

U4625E

Page 25

HP ProLiant DL760 G2 2.2 GHz/2MB or 2.0 GHz/1MB, 2048MB (4P) Standard Memory 2048 MB addressable buffered ECC SDRAM DIMM memory (2 x 256 MB DIMMs x 5 Hot-Plug RAID Memory Cartridges. The 5th cartridge is populated for redundancy.) Standard Memory Plus Optional Memory Up to 51,200 MB of addressable ECC SDRAM DIMM memory is available with the installation of optional ECC SDRAM DIMM memory expansion kits. Standard Memory Replaced with Optional Memory Up to 65,536 MB of addressable ECC SDRAM DIMM memory is available with the removal of standard memory and the installation of optional ECC SDRAM DIMM memory expansion kits. NOTE: 8 slots per Hot-Plug RAID Memory Cartridge. Up to 64 GB addressable memory total. Memory must be added in banks of two DIMMs per cartridge across all five (four if running in a non-redundant mode) Hot-Plug RAID Memory Cartridges. Charts do not represent all possible configurations. Memory Slot Cartridge 1 (C1) Cartridge 2 (C2) Cartridge 3 (C3) Cartridge 4 (C4) Cartridge 5 (C5) Standard Optional Maximum Standard Optional Maximum Standard Optional Maximum Standard Optional Maximum Standard Optional Maximum 256 MB 256 MB 2048 MB 256 MB 256 MB 2048 MB 256 MB 256 MB 2048 MB 256 MB 256 MB 2048 MB 256 MB 256 MB 2048 MB 256 MB 256 MB 2048 MB 256 MB 256 MB 2048 MB 256 MB 256 MB 2048 MB 256 MB 256 MB 2048 MB 256 MB 256 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB empty 2048 MB 2048 MB

Page 34

Smart Array 5i Controller Protocol (integrated on system Processor board) XOR engine Electrical interface Simultaneous Drive Transfer Channels Channel Transfer Rate SCSI Port Connectors Memory
Wide Ultra3 SCSI 32-bit RISC Hardware RAID Low Voltage Differential (LVD) 2
320 MB/s total; 160 MB/s per channel One external and one internal SCSI port 32 MB of DRAM used for code, transfer buffers, and non-battery-backed read cache 160 MB/s Peak transfer rate Logical Drives Supported 32 Yes Software Upgradeable Firmware RAID 5 (Distributed Data Guarding RAID Support RAID 1+0 (Striping and Mirroring) RAID 1 (Mirroring) RAID 0 (Stripping) Disk Drive and Enclosure Ultra2 and Ultra3 Protocol Support
NC7170 Dual-Port PCI-X Network Interface 1000T Gigabit Server Compatibility Adapter
Data Transfer Method Network Transfer Rate

Connector Cable Support

Two 10/100/1000-T ports IEEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.3u 100Base-TX IEEE 802.3ad, IEEE 802.3p, and IEEE 802.3Q 64-bit/133MHz PCI-X, compatible with 64/100, 64/66, 64/33 and 32/33 10Base-T (Half-Duplex) 10 Mb/s 10Base-T (Full-Duplex) 20 Mb/s 100Base-TX (Half-Duplex) 100 Mb/s 100Base-TX (Full-Duplex) 200 Mb/s 1000Base-T (Half and Full-Duplex) 2000 Mb/s Two RJ-45 10Base-T Category 3,4 or 5 UTP; up to 328 ft (100 m) 10/100/1000Base-T Category 5 UTP (2 pair); up to 328 ft (100 m)

Page 35

Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.

Page 36