HP ProLiant Storage Server installation instructions
Supported storage servers
These installation instructions apply to the following HP ProLiant Storage Server models: ML110 G5 Storage Server DL160 G5 Storage Server DL185 G5 Storage Server DL380 G5 Storage Server IMPORTANT: If your storage server is an HP ProLiant DL380 G5 High Availability Storage Server, see the HP ProLiant DL380 G5 High Availability Storage Server installation instructions for detailed clustering instructions. Go to http://www.hp.com/support/manuals, click Disk Storage Systems, and select HP ProLiant DL380 G5 High Availability Storage Server.
These instructions are intended for professionals who install and configure HP ProLiant Storage Servers. Experience with Microsoft administrative procedures and system and storage configurations is helpful, but not required.

Supporting documentation

The following documentation provides additional information about using your HP ProLiant Storage Server. To obtain this documentation, go to http://www.hp.com/support/manuals, click Disk Storage Systems, and select your HP ProLiant Storage Server model. HP ProLiant Storage Server user guide
Copyright 1999, 2008 Hewlett-Packard Development Company, L.P. First edition: November 2008 The information in this document is subject to change without notice. Printed in Puerto Rico www.hp.com
HP StorageWorks All-in-One Storage Manager user guide HP Rack Rail Kit installation instructions HP ProLiant DL380 G5 High Availability Storage Server installation instructions HP ProLiant Server troubleshooting guide
Determine a network access method
Before installing the storage server hardware, decide which access method will be used to connect to the storage server. Direct attach Connect a monitor, keyboard, and mouse directly to the storage server. This access method is mandatory if your network does not have a Dynamic Host Configuration Protocol (DHCP) server. Remote browser Access the storage server through a client running Internet Explorer 5.5 or later. ActiveX controls must be enabled on the remote client and the serial number or IP address of the storage server is required. Remote desktop Access the storage server through a client running Remote Desktop Connection. The serial number or IP address of the storage server is required. Remote management Access the storage server using either the Integrated Lights-Out 2 or Lights-Out 100 remote management method. For detailed instructions on using each of these access methods, see the HP ProLiant Storage Server user guide.

*5697-7749*

Page 1

ML110 G5 Storage Server*

Install the storage server hardware and power on
1. If installing the storage server in a rack, install the rail kit or tower-to-rack conversion kit by following the HP Rack Rail Kit installation instructions. Go to http://www.hp.com/support/ manuals, click Disk Storage Systems, and select your storage product. If connecting to the storage server using the direct attach method, connect the following cables to the back panel of the storage server in the following sequence: keyboard, mouse, network cable, monitor cable, and power cable. NOTE: The keyboard, mouse, and monitor are not provided with the storage server.

DL160 G5 Storage Server DL185 G5 Storage Server DL380 G5 Storage Server* * HP ASM is not supported on the ML110 G5 320GB SATA and DL380 G5 SAN Gateway models. To maximize HP ASM's functionality on HP ProLiant Storage Servers, install the following software. To obtain these software programs, go to http://www.hp.com/go/simplestorage. Microsoft iSCSI Software Target required for hosting application storage (Exchange and SQL Server) and iSCSI-based User-Defined application storage Data Protector Express required for creating backups to tape, other disks, or other types of storage media HP StorageWorks Storage Mirroring required for replication (required on replication source and all replication targets) Before scheduling data migration of SQL, Exchange, or User-defined data using HP ASM, you must first install Microsoft iSCSI Software Target on your storage server in addition to installing the HP All-in-One Storage Manager Agent on remote application servers that store the data to be migrated. For more information about using the HP All-in-One Storage Manager, see the HP StorageWorks All-in-One Storage Manager user guide. Go to http://www.hp.com/support/manuals, click Disk Storage Systems, and select your storage product.
If connecting to the storage server using the remote browser, remote desktop, or remote management method, connect only the network cable and power cable. Power on the system by pushing the power button on the front panel (remove the bezel if needed). The storage server starts and displays an HP ProLiant Storage Server installation screen. The installation process takes approximately 1015 minutes and requires no user interaction. When the installation process is complete, the system prompt appears.
At the system prompt, enter the default user name administrator and password hpinvent. After logging in for the first time, the Welcome screen of the Rapid Startup Wizard opens.
Set up the storage server with the Rapid Startup Wizard
The Rapid Startup Wizard guides you through setting up your storage server with basic configuration information. Before configuring any other storage settings, complete the Rapid Startup Wizard. 1. 2. On the Rapid Startup Wizard Welcome screen, click Next. On each screen of the wizard, complete the requested information. The final screen of the Rapid Startup Wizard is a summary page that displays the configuration settings. If you need to make changes, you can go back to any previous wizard screen by clicking the Back button. 3. Click Finish after completing the configuration changes. If prompted, restart the storage server after applying the changes.

Manage your storage

After installing and setting up your HP ProLiant Storage Server, you can begin managing your storage using the HP StorageWorks All-in-One Storage Manager (ASM). HP ASM comes preinstalled on the following HP ProLiant Storage Server models: Page 2

QuickSpecs

Overview
HP ProLiant ML110 Generation 5 (G5)
Front View: 1. DVD-ROM Drive 2. Power LED 3. Drive Activity LED 4. Front Bezel 5. 6. 7. 8. 9. 10. SAS Cable (SAS model only) Hard Drive Controller Card (Optional) System Board HP ProLiant 100 G5 Lights-Out 100c Management Card Port (Optional) System Fan 365W Power Supply
Rear View: 1. Rear System Fan 2. PCI Slot Cover Retainer 3. PCI Slot Covers 4. HP ProLiant 100 G5 Lights-Out 100c Management Card Port (Optional) 5. LAN Port (RJ-45) 6. Rear USB 2.0 Ports 7. Serial Port 8. VGA Port 9. PS/2 Keyboard Port 10. PS/2 Mouse Port 11. Power Supply Outlet 12. Power Supply Unit (PSU) Fan

What's New

The HP ProLiant ML110 G5 is now available with higher performance processors (quad-core up to 3.0GHz and dual-core up to 3.16GHz) resulting in better processing power and increased productivity for the growing businesses. Support for SATA Non-Hot Plug Entry and Midline Hard Drives

DA - 12867

Worldwide Version 30 June 21, 2010

Page 1

At A Glance
Processor: Processor Intel Xeon processor 3300 series Intel Xeon processor 3200 series Intel Xeon processor 3100 series Intel Core 2 Duo processor 7000 series Intel Pentium processor 2000 series Intel Celeron processor 400 series Memory: Memory Four (4) DIMM slots 1GB Standard/8GB Maximum of PC2-6400 Unbuffered DDR2 ECC 800 MHz Controller: Storage Controller SATA Models: Integrated 6 ports SATA controller with embedded RAID (4 ports available for hard disks) NOTE: Transfer rate: 3 Gb/s SATA. SAS Models: HP SC40Ge Host Bus Adapter with RAID 0, 1 support, FIO NOTE: When using the SC40Ge with SATA hard drives, 1.5G SATA hard drives are required. NOTE: Transfer rate: 3 Gb/s SATA. Support: Internal Drive Support 4 HDD Support: Internal SAS storage capacity of up to 1.8TB (4 x 450GB 3.5" SAS drives) Internal SATA storage capacity of up to 8.0TB (4 x 2TB 3.5" SATA drives) Controller: Network Controller Embedded NC105i PCI Express Gigabit Ethernet Server Adapter Slots: Expansion Slots Slot 1: PCI 32-bit/33MHz at 3.3V Slot 2: PCI-Express x8 connector with x1 link Slot 3: PCI-Express x8 connector with x1 link Slot 4: PCI-Express x8 connector with x8 link Ports: USB 2.0 Ports Eight (8) USB 2.0: 2 front, 4 rear, 2 internal (one for tape, one for standard USB device) Management: Management Standard Lights Out 100 IPMI 2.0 reporting Optional HP ProLiant 100 G5 Lights Out 100c Remote Management Card Standard HP ProLiant ML110 G5 Easy Set-up CD Factor: Form Factor Micro ATX tower (4U) Warranty: Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair are available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. NOTE: Server Warranty includes 1 year parts, 1 year labor, 1-year on-site support with next business day response. (31-1 warranty offered in AP only, excluding Japan). Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Page 2

Standard Features
Processor One of the following depending on Model
Quad-Core Processors Intel Xeon processor X3370 (3.00 GHz, 95W, 1333MHz FSB, 12MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel Xeon processor X3360 (2.83 GHz, 95W, 1333MHz FSB, 12MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel Xeon processor X3330 (2.66 GHz, 95W, 1333MHz FSB, 6MB) Intel Xeon Processor X3220 (2.40 GHz, 95W, 1066MHz FSB, 8MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel Xeon Processor X3210 (2.13 GHz, 95W, 1066MHz FSB, 8MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Dual-Core Processors Intel Xeon processor E3120 (3.16 GHz, 65W, 1333MHz FSB, 6MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel Xeon processor E3110 (3.00 GHz, 65W, 1333MHz FSB, 6MB) Intel Core 2 processor E7400 (2.80 GHz, 65W, 1066MHz FSB, 3MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel Pentium processor E2160 (1.80 GHz, 65W, 800MHz FSB, 1MB) Single-Core Processors Intel Celeron processor 440 (2.0 GHz, 35W, 800MHz FSB, 512KB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Cache Memory One of the following depending on Model
12 MB Level 2 cache - Xeon X3370, XMB Level 2 cache - Xeon X3220, XMB Level 2 cache - Xeon X3330, E3120, EMB Level 2 cache - Core2 EMB Level 2 cache - Pentium E2160 512KB Level 2 cache - Celeron 440

Chipset

Intel 3200

Memory Protection

Page 3
Memory Type Standard Maximum
PC2-6400 unbuffered DDR2 ECC 800MHz 1 GB 8 GB

Network Controller

Embedded NC105i PCI Express Gigabit Ethernet Server Adapter

Expansion Slots # 3

Width*** Technology Bus Width PCI PCIe PCIe 32-bit X1 X1
Connector Width N/A X8 X8

Number* Bus Number 2

Device Number** Number 28

Form Factor

Full height slot 33MHz/3.3V Full height slot
Full length, full height slot 4 PCIe X8 X1 Full length, full height slot *Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number. ** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus). *** Indicates the number of physical electrical lanes running to a PCI-e connector. NOTE: PCI-X Interface (PCI 32bit/33MHz compatible)

Storage Controller

Page 5

Core Infrastructure Management HP ProLiant ML110 G5 Easy Set-up CD
The HP ProLiant Easy Set-up CDs optimize single-server setup, providing a simple way to deploy reliable and consistent server configurations. The HP ProLiant 100 Series Easy Set-up CD ship standard with the ML110 G5. It offers essential single-server deployment tools for HP ProLiant 100 series servers that simplify HP entry server setup, providing a repeatable way to deploy reliable and consistent single-server configurations. The HP ProLiant Easy Set-up CDs assist with the OS installation process by preparing the system for installing "off-the-shelf" versions of Windows operating system software and automatically integrating optimized HP ProLiant server software drivers and utilities. Users enjoy the following benefits: An easy-to-use, intuitive graphical interface that prepares your system for the OS installation process. Integration of key server software drivers with assisted installation. Dependency and validity checks to ensure that all supported ProLiant software can be installed. NOTE: For the latest information about other related software; please visit the HP Insight Control Management Software Portfolio at: http://h18004.www1.hp.com/products/servers/management/ and the HP ProLiant Easy Set-up CD Web site at: www.hp.com/servers/easysetup
Industry Standard Compliance
ACPI V3.0a Compliant PCI 2.3 Compliant PXE Support WOL Support IPMI 2.0 compliance Microsoft Logo certifications RedHat Enterprise Linux Logo certifications SUSE Linux Enterprise Server Logo certifications USB 2.0

Manageability

Standard Lights Out 100 IPMI 2.0 reporting Optional HP ProLiant 100 G5 Lights-Out 100c Remote Management Card Standard HP ProLiant ML110 G5 Easy Set-Up CD

Security

Power-on password Setup password USB lock

Server Power Cords

6' country specific, lowline NEMA power cord.

Page 6

Power Supply 365 Watts

System Fans

1 non-redundant system fan shipped standard 1 non-redundant CPU heatsink fan shipped standard
Operating Systems and Virtualization Software Support for ProLiant Servers
Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Netware NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos and our driver download page http://www.hp.com/support/ML110G5

Page 8

Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see "Configuration Information - Factory Integrated Models" section".
HP ML110 G5 X3330 NHP-SATA 495124-xx1 Processor(s) Cache Memory Memory Storage Controller Hard Drive Internal Storage Optical Drive Form Factor (1) Intel Xeon processor X3330 (2.66 GHz, 95W, 1333MHz FSB, 6MB) 6MB (2 x 3MB) Level 2 cache 1GB PC2-6400 UB ECC (DDR2-800MHz) (1 x 1GB) HP Embedded 6 Port SATA Controller with Embedded RAID (4 ports for HDD) 1 x 160GB 3.5-inch Non-hot-plug LFF SATA Non-Hot Plug LFF SATA: Maximum 8.0TB (4 x 2TB) Half-Height 16x SATA DVD-ROM Micro ATX Tower (4U)
HP ML110 G5 E3110 NHP SATA 533548-xx1
Processor(s) Cache Memory Memory Storage Controller Hard Drive Internal Storage Optical Drive Form Factor
(1) Intel Xeon processor E3110 (3.00 GHz, 65W, 1333MHz FSB, 6MB) 6MB (2 x 3MB) Level 2 cache 1GB PC2-6400 UB ECC (DDR2- 800 MHz) (1x1GB) HP Embedded 6 Port SATA Controller with Embedded RAID (4 ports for HDD) 1 x 160GB 3.5-inch Non-hot-plug LFF SATA Non-Hot Plug LFF SATA: Maximum 8.0TB (4 x 2TB) Half-Height 16x SATA DVD-ROM Micro ATX Tower (4U)
HP ML110 G5 Pentium E2160 NHP-SATA 444809-xx1
(1) Intel Pentium processor E2160 (1.8GHz, 65W, 800MHz FSB, 1MB) 1MB (1 x 1MB) Level 2 cache 1GB PC2-6400 UB ECC (DDR2-800MHz) (1 x 1GB) HP Embedded 6 Port SATA Controller with Embedded RAID (4 ports for HDD) 1 x 160GB 3.5-inch Non-hot-plug LFF SATA Non-Hot Plug LFF SATA: Maximum 8.0TB (4 x 2TB) Half-Height 16x SATA DVD-ROM Micro ATX Tower (4U)

Page 9

Country Code Key xx=00 xx=01 xx=03 xx=04 xx=05 xx=20 xx=29 xx=37 xx=42 xx=AA
NA Australia (Excluding P/N 533548-xx1) UK Germany France Brazil (Excluding P/N 533548-xx1) Japan (Excluding P/N 533548-xx1) AP Euro PRC

Page 10

Configuration Information-Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration
Models HP ProLiant ML110G5 NHP CTO Chassis Factory Integrated Models ship with: Embedded NC105i PCI Express Gigabit Ethernet Server Adapter Keyboard and Mouse NOTE: Keyboard and Mouse option needs to be manually selected for shipment. Please see the USB Options listed in the options selection of this QuickSpecs. Power cord Micro ATX Tower (4U) NOTE: HP SATA drive models are limited to 4.0TB support. NOTE: On SATA models with embedded RAID, setup instructions are located in the User Guide. CTO RAID set-up is not available. HP ProLiant ML100 Series Server User Guide: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00260539/ c00260539.pdf 445607-B21

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
HP Processors Quad-Core Processor Intel Xeon processor X3370 (3.00GHz, 95W, 1333MHz FSB, 12MB), FIO Intel Xeon processor X3360 (2.83GHz, 95W, 1333MHz FSB, 12MB), FIO Intel Xeon processor X3330 (2.66 GHz, 95W, 1333 MHz FSB, 6MB), FIO Intel Xeon Processor X3220 (2.40 GHz, 95W, 1066 MHz FSB, 8MB), FIO Intel Xeon Processor X3210 (2.13 GHz, 95W, 1066 MHz FSB, 8MB), FIO Dual-Core Processor Intel Xeon processor E3120 (3.16 GHz, 65W, 1333 MHz FSB, 6MB), FIO Intel Xeon processor E3110 (3.00 GHz, 65W, 1333 MHz FSB,6MB),FIO Intel Core 2 processor E7400 (2.80 GHz, 65W, 1066MHz FSB, 3MB), FIO Intel Pentium processor E2160 (1.8GHz, 65W, 800 MHz FSB, 1MB), FIO Single-Core Processor Intel Celeron processor 440 (2.0GHz, 35W, 800 MHz FSB, 512KB), FIO 535026-L21 493261-L21 493259-L21 455069-L21 455068-L21 492973-L21 464376-L21 533838-L21 450359-L21 455072-L21

HP Memory

HP 2GB (1x2GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit HP 1GB (1x1GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit

450260-B21 450259-B21

Page 11
HP Optical Drives HP Half-Height SATA DVD ROM Kit HP Half-Height SATA DVD-RW Optical Kit

447326-B21 447328-B21

HP Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; please refer to the specific hard drive QuickSpecs for details. NOTE: Supports up to 4 hard drives. SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18004.www1.hp.com/products/quickspecs/13021_div/13021_div.html (Worldwide) SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives HP 450GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive HP 300GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive HP 146GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive

507774-B21 507772-B21 458941-B21

571232-B21 458947-B21

454234-B21 417950-B21 417855-B21
Step 3: Choose Additional Options for Factory Integration
HP Storage Controller HP SC40Ge SAS HBA, FIO 449176-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" sections below.

Page 12

Core Options
NOTE: Some options may not be factory integratable. Please contact your local sales representative for additional information. HP 2GB (1x2GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit 450260-B21 HP Memory HP 1GB (1x1GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit 450259-B21

HP Optical Drives

HP Half-Height SATA DVD ROM Kit HP Half-Height SATA DVD-RW Optical Kit
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; please refer to the specific hard drive QuickSpecs for details. SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html (Worldwide) SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives HP 450GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive HP 300GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive HP 146GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive NOTE: Please see the for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide)

Page 13

HP Networking
HP NC110T PCI Express Gigabit Server Adapter HP NC360T PCI Express Dual Port Gigabit Server Adapter HP NC373T PCI Express Multifunction Gigabit Server Adapter NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs
434905-B21 412648-B21 394791-B21

Page 14

Additional Options
HP Entry Level Server Management
HP ProLiant ML100 G5 Lights-Out 100c Remote Management Card NOTE: Supports HP ProLiant DL180 G5, ML110 G5, ML115 G5 and ML150 G5 servers. NOTE: For additional information on Lights-Out 100c Remote Management Card, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12468_div/12468_div.html

445513-B21

HP Storage Controllers
SAS Controllers Smart Array E200 Controller HP Smart Array E200/128 BBWC Controller NOTE: Supports RAID 0,1,1+0, 5/BBWC. Optional Upgrades HP Non-Hot Plug SAS/SATA 4-Port Cable Kit NOTE: The purchase of a SAS Storage Controller requires the purchase of HP SAS/SATA 4-Port Cable (P/N 457692-B21). NOTE: SAS Storage Controllers supports both SATA and SAS drives. NOTE: On SATA models with embedded RAID, setup instructions are located in the User Guide. CTO RAID set-up is not available. HP ProLiant ML100 Series Server User Guide: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00260539/ c00260539.pdf SAS HBA HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS. NOTE: Supports RAID 0,1. SCSI HBA HP SC11Xe U320 Host Bus Adapter NOTE: Supports Tape only, no RAID support. NOTE: Recommended HBA for SCSI tape drive connect. NOTE: Please see the following QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12460_div/12460_div.html (Smart Array E200 Controller) http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html (SC44Ge HBA) http://h18004.www1.hp.com/products/quickspecs/12566_div/12566_div.html (SC11Xe HBA)

411508-B21

457692-B21

416096-B21

412911-B21

Page 15

Backup & Recovery Software
Data Protector Express HP Data Protector Express 4.0 SP1 Backup Server HP Data Protector Express 4.0 SP1 for Microsoft Small Business Server HP Data Protector Express Backup Server 4.0 SP1 Upgrade from Data Protector Express Single Server Edition NOTE: Only one of these Data Protector Express base products is required. To see available options: http://www.hp.com/go/dataprotectorexpress

BB117BA BB118BA BB117BT

Tape Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For hardware and software compatibility of HP StorageWorks tape backup products see: http://www.hp.com/go/connect. HP StorageWorks DAT 320 USB Internal Tape Drive HP StorageWorks DAT 320 SAS Internal Tape Drive NOTE: Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive NOTE: Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive NOTE: Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Tape Autoloader NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation. Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. HP StorageWorks MSL2024 Tape Library with one LTO-3 Ultrium 920 SAS Drive NOTE: Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. AJ825A AJ830A

DW085A

EH847A

AH558A

AH559A

Disk Backup

NOTE: For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d. For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx. For hardware and software compatibility of HP StorageWorks disk backup products see: http://www.hp.com/go/connect. USB Removable Media RDX Disk Backup Systems HP StorageWorks RDX320 Internal Removable Disk Backup System NOTE: 320GB of disk capacity per data cartridge. HP StorageWorks RDX500 Internal Removable Disk Backup System NOTE: 500GB of disk capacity per data cartridge. HP StorageWorks RDX750 Internal Removable Disk Backup System NOTE: 750GB of disk capacity per data cartridge.

AJ767A AJ934A AW577A

Page 16
HP Uninterruptible Power HP Tower UPS Systems HP T1000 G3 UPS Models HP T1000 G3 UPS, INTL HP T1000 G3 UPS, NA HP T1500 G3 UPS Models HP T1500 G3 UPS, NA HP T1500 G3 UPS, INTL HP T1500J UPS, Japan HP T750 G2 UPS Models HP T750 G2 UPS, INTL
AF449A AF448A AF450A AF451A AF458A AF447A AF446A
HP T750 G2 UPS, NA NOTE: Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13160_div/13160_div.html HP T1000 G2 UPS HP T1000J UPS, Japan NOTE: Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12506_div/12506_div.html HP T750 UPS HP T750J UPS NOTE: Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12192_div/12192_div.html NOTE: For additional information on sizing your server, please reference: http://www.upssizer.com

AF457A

AF456A

HP Rack Options

HP KVM Switch Options HP 1x4 Console Switch HP PS2 Server Console Cable, 6 foot, 2-Pack HP USB Server Console Cable, 6 foot, 2-Pack NOTE: required for supporting USB peripherals. NOTE: For additional information regarding KVM Switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm Rack Kits Monitor/Utility Shelf ProLiant Rack Enabling Kit

AF611A AF612A AF613A

253449-B21 417705-B21
HP USB and SD Options HP USB 2-Button Optical Mouse ALL HP USB 04 Standard Keyboard

DC172B DT528A#xxx

Controller Integrated SATA Integrated SATA
Hard Drives (SATA Models only) NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives Quantity Position Supported Supported Controller 2TB 3G 7.2K Up to 4 3,4,5,Port SATA controller with Embedded RAID on Motherboard 1TB 3G 7.2K NOTE: Transfer rate: 3 Gb/s SATA 500GB 3G 7.2K SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives Quantity Position Supported Supported Controller 250GB 3G 7.2K Up to 4 3,4,5,Port SATA controller with Embedded RAID on Motherboard 160GB 3G 7.2K NOTE: Transfer rate: 3 Gb/s SATA Hard Drives (SAS Models only) SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives DA - 12867 Worldwide Version 30 June 21, 2010 Page 20
Quantity Supported Up to 4 Position Supported 3,4,5,6 450GB 3G 15K DP 300GB 3G 15K DP 146GB 3G 15K DP
Controller HP 4 Internal Port SAS HBA SC40Ge with RAID (0,1) NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
Maximum Storage Capacity SATA/SAS Models Internal SATA SAS
8.0TB (4 x 2TB) 1.8TB (4 x 450GB)
Tape and Disk Backup NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media, including the internal fitting models, see: http://www.hp.com/go/tape. For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d. For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx. For hardware and software compatibility of HP StorageWorks disk and tape backup products see: http://www.hp.com/go/connect. HP StorageWorks SCSI Tape Drives LTO-1 Ultrium 232 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-3 Ultrium 960 LTO4 Ultrium 1760 LTO-4 Ultrium 1840 DAT 40 DAT 72 DAT 160 HP StorageWorks SCSI Rack Mount Kits 1U Rack-Mount Kit 3U Rack-Mount Kit HP StorageWorks USB Tape Drives DAT 40 DAT 72 DAT 160 DAT 320 HP StorageWorks USB Rack Mount Kits 1U USB Rack-Mount Kit HP StorageWorks SAS Tape Drives Position Internal or External Recommended Controller HP SC11Xe Host Bus Adapter Please check the full compatibility information at: http://www.hp.com/go/connect Part Number 412911-B21

External

HP SC11Xe Host Bus Adapter Please check the full compatibility information at: http://www.hp.com/go/connect

Internal or External

USB 2.0 Port
HP SC44Ge SAS Host Bus Adapter

Page 21

DAT 160 DAT 320 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-4 Ultrium 1760 LTO-4 Ultrium 1840 LTO-5 Ultrium 3000 LTO-5 Ultrium 3280 HP StorageWorks SAS Rack Mount Kits 1U Rack-Mount Kit 3U Rack-Mount Kit HP StorageWorks SCSI Tape Autoloaders DAT 72x10 Autoloader 1/8 G2 Autoloader HP StorageWorks SCSI Tape Libraries MSL2024 MSL4048 MSL8096 MSL6000 HP StorageWorks SAS Tape Autoloaders and Libraries 1/8 G2 Autoloader MSL2024 MSL4048 MSL8096 HP StorageWorks Fibre Channel Tape Libraries MSL2024 MSL4048 MSL8096 MSL6000 HP StorageWorks USB RDX Removable Disk Backup System RDX160 RDX320 RDX500 RDX750 External

23.81 lb (10.8 kg)

Input Requirements (per power supply)
90 to 132 VAC, 180 to 264 VAC Rated Input Current 6 A (at 100 VAC), 3 A (at 200 VAC) Rated Input Frequency 47 to 63 Hz Rated Input Power 600 W (at 100 VAC), 600 W (at 200 VAC) Rated Steady-State Power 365 W (at 100 VAC), Power Supply Output (per power supply) 365 W (at 200 VAC) Maximum Peak Power 385 W (at 100 VAC), 385 W (at 200 VAC) 10 to 35C (50 to 95F) at sea level with an System Inlet Temperature Operating altitude derating of 1.0C per every 305 m (1.8F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10C/hr (18F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30C (86F). Non-operating -30 to 60C (-22 to 140F). Maximum rate of change is 20C/hr (36F/hr). Operating 10% to 90% relative humidity (Rh), 28C Relative Humidity (non-condensing) (82.4F) maximum wet bulb temperature, noncondensing. Non-operating 5% to 95% relative humidity (Rh), 38.7C (101.7F) maximum wet bulb temperature, noncondensing. Operating 3050 m (10,000 ft). This value may be limited by Altitude the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min). Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min). Listed are the declared A-Weighted sound power levels (LWAd) and declared Acoustic Noise average bystander position A-Weighted sound pressure levels (LpAm) when DA - 12867 Worldwide Version 30 June 21, 2010 Page 25
Emissions Classification (EMC)
the product is operating in a 23C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). SATA Model Idle L WAd 4.2 Bels L pAm 26 dBA Operating L WAd 5.1 Bels L pAm 34 dBA SAS Model Idle L WAd 5.2 Bels L pAm 34 dBA Operating L WAd 5.7 Bels L pAm 40 dBA Class B FCC Rating CISPR 22; EN55022; EN55024; FCC CFR 47, Normative Standards Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive

458947-B21

Capacity Height Maximum drive dimension Width Depth Maximum drive dimension Interface Transfer Rate (Maximum) Native Command Queuing Seek Time (typical reads, including settling)
160,041 MB 1.0 in. (26.1 mm) 4.0 in (101.6 mm) 5.787 in (147.0 mm) Serial ATA 3Gb/s N/A Single Track Average Full-Stroke Rotational Speed 2.0 ms <11 ms 23.0 ms 7,200 rpm

Page 26

Physical Configuration Operating Temperature
Bytes/Sector 512 Logical Blocks 312,581,to 131 F (5 to 55 C)
16X Max SATA DVD-ROM Disk Drive

Applicable Disk

CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2, Form 1 and 2) Photo CD (Single and Multi-session) CD-R, CD-RW Mixed Mode (Audio and Data combined) DVD-ROM DVD-R/RW, DVD+R/RW CD-R, CD-RW, DVD-ROM, DVD+R, DVD+RW 4.7 GB (DVD-5) 8.54 GB (DVD-9) 2,048 bytes <140 ms <250 ms 8100 to 21600 KB/s (6X to 16X) 1.5 Gbps
Capacity Block Size Interface Access Times (typical) Data Transfer Rate Cache Buffer Start-up Time (typical) Stop Time Laser Parameters Operating Conditions Dimensions DVD Media SATA Random Full-Stroke Sustained Bus Rate 128 KB < 7 seconds < 4 seconds Type Wave Length Temperature Humidity (HxWxD, maximum) Weight
Semiconductor Laser GaA1As nm 41 to 122 F (5 to 50 C) 10% to 90% 1.7 x 5.85 x 8.11 in (42.9 x 150 x 195 mm) 2.64 lb (1.2 kg)

Page 27

HP 4 Internal Port SAS Host Bus Adapter (SAS/SATA HP Model) SATA Protocol SATA Ports Port transfer rate Maximum Capacity RAID Levels Supported Logical RAID Volumes Supported Dimensions (excluding bracket) Disk Drive and Enclosure Protocol Support Architecture SAS Connectors Data Transfer Method PCI Bus Speed Simultaneous Drive Transfer Ports Port Transfer Rate Software upgradeable Firmware Maximum Capacity Memory Addressing Logical Drives Supported
SATA 1.5Gb/s 4 internal 1.5 Gb/s total up to 4.0TB (4 x 1TB Non-Hot Plug SATA HDD) RAID 1 (Mirroring) RAID 0 (Striping) 2 6.6 x 2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm) 3 Gbps SAS (Serial Attached SCSI) 1.5 Gbps SATA (Serial Advanced Technology Attachment) 64-bit 1 internal SFF8484 x4 Wide SAS Connectors 12 Gbps per x4 Wide SAS Port (4 x 3 Gbps) PCI-Express x8 - 2 GB/s maximum bandwidth PCI-Express xx4 Wide SAS Connectors 12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s) Yes
1.2TB (4 x 300GB) 64-bit, supporting servers memory greater than 4 GB Up to 2 Logical Volumes Up to 10 drives total in all RAID volumes Up to 2 Drives per RAID 1 Up to 4 Drives per RAID 0 RAID 1 (Mirroring) RAID Support RAID 0 (Striping) 4-MB flashable ROM Upgradeable Firmware Disk Drive and Enclosure 3 Gbps SAS and 1.5 Gbps SATA Protocol Support

Page 28

HP SC40Ge SAS Host Bus Adapter with RAID RAID Support
RAID 1 (Mirroring) RAID 0 (Striping) Logical Drives Supported Up to 2 Logical Volumes Up to 10 drives total in all RAID volumes Up to 2 Drives per RAID 1 Up to 8 Drives per RAID 0 3.6TB (8 x 450GB) Maximum Capacity PCI-Express x8 - 2 GB/s maximum bandwidth Data Transfer Method 12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s) Port Transfer Rate Simultaneous Drive 2 x4 Wide SAS Connectors Transfer Ports Protocols 3 Gbps SAS and 1.5 Gbps SATA 1.5 Gbps SATA (Serial Advanced Technology Attachment) External SAS Connectors None Internal SAS Connectors 2 internal SFF8484 x4 SAS Connectors Upgradeable Firmware 4MB flashable ROM
Embedded NC105i PCIe Network Interface Gigabit Server Adapter Data Transfer Method Controller Network Transfer Rate

Connector Cable Support

Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver. Compliant to x1 PCIe Specification BCM5722 10Base-T (Half-Duplex) 10 Mb/s 10Base-T (Full-Duplex) 20 Mb/s 100Base-TX (Half-Duplex) 100 Mb/s 100Base-TX (Full-Duplex) 200 Mb/s 1000Base-TX (Half and 2000Mb/s Full-Duplex) RJ-45 connector Performs all the physical layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethemet on standard Category 5 UTP

Page 29

Environment-friendly Products and Approach End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.