Processor

Dual-Core Intel Xeon Processor 5150 (2.66 GHz, 65 Watts, 1333 FSB)

Cache Memory

4MB (1 x 4MB) Level 2

Chipset

Intel 5000Z Chipset NOTE: For more information regarding Intel chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/.

Page 5

Memory Type Memory Protection DIMM Sockets Maximum (Limited by O/S) Standard
PC2-5300 Fully Buffered DIMMs (DDR2-667) Advanced ECC, Online Spare GB 1 GB (2 x 512MB)

Network Controller

Embedded NC373i Multifunction Gigabit Network Adapter with TCP/IP Offload Engine NOTE: Supports the Microsoft Windows Server 2003 Scalable Networking Pack (a free download from Microsoft), which includes TCP Chimney Offload, Receive-side Scaling (RSS), and NetDMA features. NOTE: Also supports RDMA through optional ProLiant Essentials Licensing Kits.

Expansion Slots

Bus Speed/ Maximum Bus Number* Device Hot Plug PCI Voltage Connector Card Length Number** 6**** PCI Express 12.0 no N/A x4/xPCI Express 12.0 no N/A x4/x8 4*** PCI Express 12.0 no N/A x4/x6412.2 no 3.3 Volt bit/100MHz PCI-X 2 6412.1 no 3.3 Volt bit/100MHz PCI-X 1 6412.1 no 3.3 Volt bit/133MHz PCI-X * Bus number listed reflects the default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number. ** Slots enumerate from lowest to highest Device ID by bus (starting with the lowest bus). *** A single PCI Express slot with x8 Bus Speed can be achieved by attaching the x4/x8 PCIE Bus Expander option kit (403724-B21) to slot number 4. The installation of this kit uses both slots 4 and 5 to create the single x8 speed PCI Express slot. **** The optional PCI-X expander can utilize slot 6 to provide an additional two (2) 64-Bit PCI-X full length, full height slots. Please see below for more information. (435670-B21) NOTE: Slots 1-3 can accept 3.3V or universal keyed PCI cards.

Slot Number

Storage Controller
HP Smart Array E200i/128 Controller with battery-backed write cache (BBWC) RAID 0/1/1+0/5

Page 6

Storage Hard Drives Internal:

Optical Drive

6 x 160GB SATA 7.2K LFF HDDs (960GB SATA model) 6 x 250GB SATA 7.2K LFF HDDs (1.5TB SATA model) 6 x 500GB SATA 7.2K LFF HDDs (3TB SATA model) 6 x 300GB 3G SAS 15K LFF HDDs (1.8TB SAS model) HP DVDR/RW 16X Half Height
Maximum Storage Capacity (raw)
Internal (Hot Plug SFF SAS) 3TB Internal plus External 39TB
6 x 500GB LFF SATA HDDs 6 x 500GB LFF SATA int. + 48 x 750GB LFF SATA ext.

Interfaces

Serial Pointing Device (Mouse) Graphics Keyboard Network RJ-45 USB 2.0 Ports
2 (1 dedicated for iLO 2) 6 (2 front, 2 rear, 2 internal) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.

Graphics

Integrated ATI ES1000, 32MB video standard 16 bit color: maximum resolution of 1600 x bit color: maximum resolution of 1280 x 1024 NOTE: Maximum resolution available via iLO 2 remote console is 1280x1024.

Management

Microsoft Management Console (MMC)-based user interface (also accessible via HTTPS) Remote system management via Remote Desktop or Telnet Integrated Lights-Out 2 featuring Integrated Remote Console with KVM over IP performance over shared network access (Advanced License included standard) Virtual Text Remote Console Virtual Power Button Control Integrated Remote Console Dedicated & full function shared network connectivity Browser, command line and scripted access Automatic IP Configuration via DHCP/DNS/WINS Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH) OS independent hardware health status IML and iLO Event Logging Support for 12 user accounts with customizable access privilege Advanced license: upgrades the iLO 2 processor with comprehensive remote control including Virtual KVM graphical console, virtual media, and enterprise security.

Page 7

Form Factor Tower or Rack (5U) NOTE: Rack models (and rack conversion kit) support:
Square or round hole racks 24"- 35" deep, including HP Rack System /E and HP Systems Telco racks with 3rd part option kit from Rack Solutions http://www.racksolutions.com/hp
Industry Standard Compliance
ACPI V2.0 Compliant PCI 2.2 Compliant PXE Support WOL Support PCI-X 1.0a Compliant Microsoft Logo certifications USB 2.0

Server Power Cords

6' country-specific NEMA power cord

Power Supply

Redundant 800 Watt-CE Mark Compliant Hot Plug Power Supplies (1000 Watt high line) NOTE: Please see the "Power Specifications" section later in this document for low line and high line requirements.
UPS and PDU Power Cord Matrix
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units: http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/index.html

System Fans

4 fans total (does not include power supply or processor heat sink fans)

Rack Kit

An HP ProLiant ML350 G5 Storage Server can be rack-mounted using the HP Tower to Rack Conversion Kit (ML350 G5 Kit): 412640-B21

Page 8

Optional Software
Optional Software from HP for Storage Servers
Microsoft iSCSI Software Target - Powerful iSCSI software target solution that provides affordable application storage provisioning, protection, and availability for small and medium office environments. The software adds block storage capability to ProLiant Storage Servers and creates a single platform that delivers file, print, and application storage services, all over existing Ethernet networks. It helps administrators consolidate storage capacity, improve storage utilization, minimize system downtime, simplify backup operations, enable rapid recovery, and provides high availability for key applications and services. For more information: http://h18006.www1.hp.com/products/storageworks/ms_iscsi/index.html HP StorageWorks Storage Mirroring Software - HP StorageWorks Storage Mirroring offers a host-based application that performs remote copy over an IP LAN/WAN. Key features include asynchronous replication that can be scheduled to a fine granular level, Logical Unit Number (LUN), file or byte level. Other features include multiple replication configuration options including peer-to-peer and many-to-one. In addition, Storage Mirroring is a very cost effective disaster recovery alternative from one host to another within a LAN, storage center, or between direct attached storage in metro offices and regional centers. Additional configurations allow replication from small office environments to ensure business continuity without an outside IT staff. For more information: http://h18006.www1.hp.com/products/storage/software/sm/index.html HP Data Protector Software - The HP OpenView Storage Data Protector software is enterprise data protection and disaster recovery, ensuring recovery from any disruption. Data Protector integrates a variety of techniques to eliminate backup and recovery windows. The capabilities to eliminate planned downtime range from online backup and backup of open files to zerodowntime, zero-impact backup. The software provides industry-leading instant recovery as well as several disaster recovery alternatives to eliminate unplanned downtime, allowing recovery of entire data centers in minutes. Data Protector is enabling organizations to reduce costs by automating routine tasks to maximize the effectiveness of the data protection staff. For the price of an entry-level product, it provides the enterprise functionality customers need. Data Protector scales from single server to distributed enterprise, covering an extensive range of heterogeneous applications, operating environments and storage configurations with a single solution. All ProLiant Storage Servers support using Data Protector as a backup software solution For more information on HP Data Storage Protector: http://h18006.www1.hp.com/products/storage/software/dataprotector/index.html HP StorageWorks File Migration Agent - HP FMA is an automated solution designed to help simplify Windows-based file, web, and application server administration in small business to enterprise environments. This is accomplished through policy-based file migration and archive to popular storage targets, including HP StorageWorks Reference Information Storage System (RISS), HP StorageWorks File System Extender, and NAS, via Common Internet File System (CIFS). The following Windows Storage Server features or add-ons are currently NOT supported by HP File Archiving software: NOTE: Single Instance Storage (SIS) - (NOT SUPPORTED) NOTE: DFS-Replication (DFS-R) - (NOT SUPPORTED) NOTE: File Server Resource Manager (FSRM) - Content Filter, & File Screening - (NOT SUPPORTED)

Page 9

For more information: http://h18006.www1.hp.com/products/storage/software/fma/ HP Systems Insight Manager Software - HP SIM 5.x is the first unified server and storage management platform. Now, from a single management console, administrators can manage their complete HP server and storage environment with a feature rich, extensible and secure management tool set. HP SIM also serves as a central access point for ProLiant Essentials, Integrity Essentials, and Storage Essentials software options that deliver targeted functionality for these platforms. For more information: http://h18013.www1.hp.com/products/servers/management/hpsim/index.html Insight Management Agents - Allow all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers. HP Storage Essentials NAS Manager Software - Provides comprehensive Network Attached Storage (NAS) management capabilities for HP ProLiant Storage Server. Visualize your distributed HP NAS solutions and centrally manage their capacity, performance, events, and dependencies to ensure NAS availability and performance and unify SAN and NAS management. For more information on the complete line of HP Storage Essential products go to: http://www.hp.com/go/storageessential

Page 10

Service and Support, HP Care Pack, and Warranty Information

Warranty

All ML350 G5 Storage Servers come with a standard 3-3-3 warranty (3 years parts exchange, 3 years labor and 3 years onsite next business day response)
Services Included with the One year of HP Software Support, standard 9x5 business hours (software technical support and software product and documentation updates). Product
Service and Support Upgrade options
Response - Upgrade on-site response from next business day to same day 4-hours Coverage - Extend hours of coverage from 5 days x 9 hours to 7 days x 24 hours Duration - Select duration of coverage for a minimum period of 1year or multiple years HP offers a portfolio of services ranging from Storage Design and Architecture that provides a complete multi-site design and implementation, to various levels of on-going maintenance support. Additionally the basic warranty service can be enhanced and/or HP Installation services can be purchased. Specifically HP Care Pack services include: Product number(s) Care Pack Duration Commercial Direct & Enterprise reseller channels channels AE418A HP Software 1 year Bundled Bundled AE419A Support for Storage, 3 years n/a n/a AE420A 9xyears n/a n/a AE421A 5 years n/a n/a AE423A AE424A HP Software 1 year n/a n/a AE425A Support for Storage, 3 years n/a n/a AE426A 24 x years n/a n/a AE428A 5 years n/a n/a AE429A AE430A Support Plus for 1 year UB993E HA109A1 AE431A Storage 3 years UB995E HA109A3 AG580A 4 years n/a n/a AG586A 5 years n/a n/a AG587A AG588A Post Warranty n/a n/a Support Plus 24 for 1 year UB994E HA110A1 - 84N Storage 3 years UC544E HA110A3 - 84N 4 years n/a n/a 5 years n/a n/a Post Warranty n/a n/a Proactive 24 (P24) 1 year n/a n/a 3 years n/a n/a 4 years n/a n/a 5 years n/a n/a Critical Support 1 year n/a n/a (CS) 3 years n/a n/a 4 years n/a n/a 5 years n/a n/a

Page 11

6 hour CTR

Installation

1 year 3 years 4 years 5 years n/a
UC567E UC568E n/a n/a U7986E
HA105A1 HA105A1 n/a n/a HA113A1

HP Software Support

HP Software Support, 24 x7 HP Support Plus

HP Support Plus 24

HP Proactive 24
Connect with HP Response Center engineers via telephone, electronic communication, or FAX for assistance in resolving software implementation or operations problems. HP Services provides corrective support to resolve identifiable and reproducible software product problems, and to help you identify problems that are difficult to reproduce. 9x5 coverage - Service is available during standard business hours, Monday through Friday (excluding holidays). Provides all the benefits of the regular Software Support, plus HP Services engineers are available around the clock 365 days per year. Increases the performance and availability of your IT infrastructure with comprehensive, consistent hardware and software services. HP Services engineers deliver onsite hardware support and over-thephone software support 13 hours per day, 5 days per week. Encompasses the HP ProLiant Storage Server products, selected multivendor hardware and provides trouble-shooting software problems which range from the Storage Server 2003 operating system to the available utilities. In addition, this service makes software updates available to you at substantial savings. Provides recovery and re-configuration assistance of the HP ProLiant Storage Server using the recovery disk and your saved configuration file. Provides all the benefits of the regular Support Plus Care Pack, plus HP Services engineers are available to deliver onsite hardware and over-the-phone software support around-the-clock 365 days per year. An integrated hardware and software support solution that combines efficient problem prevention with responsive technical assistance whenever you need it. Improves the effectiveness of technologies across your IT infrastructure, and also, establishes a collaborative relationship between you and HP that strengthens your IT team and gives you rapid access to our expertise as issues arise.

Installation Services

The service deployment activities will include: Unpacking the product, performing initial inspection, and setting up product hardware and power connectivity Connecting Customer-provided cables Setting the network address and setting appropriate domain variables in the NAS operating system Configuring the storage by creating a file share Configuring user mapping to make the share available for access Creating a sample file data copy or Snapshot

Page 13

Product number(s): Care Pack All Components Duration Installation for One time Storage (per event)
Commercial reseller Direct & Enterprise channels channels Available HA113A1 - 5D6
The following brick level options/components do not have individual HP Care Pack Services. These items will be included in product HP Care Pack Services into which they are installed. Disk Drives Tape Drives CD/DVD ROM SCSI Hubs in SBBs Bus Converters Backplane RAID Power Supplies Cabling Controllers

Page 14

Product Configuration Wizard
In the following you will be guided through a series of steps to help you configure your ProLiant Storage Server. NOTE: Options ship separately and are not factory integrated.

Step 1 Choose a Model

Select one of four available ML350 G5 Storage Server models NOTE: Models names are based on raw storage capacity, not available user storage. Microsoft Windows Storage Server 2003 Release 2, Standard Edition HP ProLiant ML350 G5 Operating System Storage Server Common Processor Dual-Core Intel Xeon 5150 (2.67 GHz, 65W, 1333MHz FSB) Specifications 4MB (1 x 4MB) Level 2 Cache Memory 1 Number of Processors 1 GB (2 x 512 MB) Memory PC2-5300 Fully Buffered DIMMs (DDR2-667) with Advanced ECC Memory Type Embedded Smart Array E200i Controller with 128MB and BBWC Storage Controller MSA20, MSA30, MSA60 and/or MSA70 storage enclosures can be added to External Storage an ML350 G5 Storage Server to expand storage capacity. Enclosure support requires addition of an HP Smart Array Controller with external port(s). Embedded NC373i Multifunction Gigabit Server Adapter with TCP/IP Network Controller Offload Engine Six full-height, full-length slots available: Expansion Slots (embedded) One 64-bit/133-MHz PCI-X Two 64-bit/100-MHz PCI-X Three x8 PCI Express (x4 speed) HP DVD+R/RW 16X Half Height Optical Drive Hot plug redundant power supplies and redundant fans Redundancy iLO2 Port with Advanced License Pack included Remote Management Tower 5U Form Factor HP ProLiant ML350 G5 960GB Storage Server AE418A, Americas AE419A, Asia Pacific AE420A, Europe AE421A, Australia HP ProLiant ML350 G5 1.5TB Storage Server AE423A, Americas AE424A, Asia Pacific AE425A, Europe AE426A, Australia Internal Storage 6 x 160GB SATA 7.2K 3.5" hot-plug HDDs

Internal Storage

6 x 250GB SATA 7.2K 3.5" hot-plug HDDs

Page 15

HP ProLiant ML350 G5 3TB Storage Server AE428A, Americas AE429A, Asia Pacific AE430A, Europe AE431A, Australia Internal Storage
6 x 500GB SATA 7.2K 3.5" hot-plug HDDs
HP ProLiant ML350 G5 Internal Storage 1.8TB SAS Storage Server AG580A, Americas AG586A, Asia Pacific AG587A, Europe AG588A, Australia
6 x 300GB 3G SAS 15K 3.5" hot-plug HDDs
Step 2 - Add Another Processor
You can add a second processor to any HP ProLiant ML350 G5 Storage Server Dual-Core Intel Xeon Processor 5150 (2.67 GHz, 65W, 1333MHz FSB) Processor 416890-B21

Step 3 - Add More Memory

NOTE: All models come standard with 1 GB (2 x 512MB) of memory and are expandable to 4 GB (maximum is limited by operating system license). 512 MB FBD PC2-x 512 MB Kit 413507-B21 Memory 1 GB FBD PC2-x 512 MB Kit 397409-BGB FBD PC2-x 1 GB Kit 397411-BGB FBD PC2-x 2 GB Kit 397413-B21
Step 4 - Add Network Adapters
Embedded NC373i Multifunction Gigabit Server Adapter with TCP/IP Offload Engine standard. Select additional cards for higher performance and redundancy. NOTE: Multifunction Server Adapters---including the embedded NC373i--require installation of the Microsoft Windows Server 2003 Scalable Networking Pack (a free download from Microsoft) to enable TCP Chimney offload, Receive-side Scaling (RSS), and Network Direct Memory Access (NetDMA) features. NOTE: A single PCI Express slot with x8 Bus Speed can be achieved by attaching the x4/x8 PCIE Bus Expander option kit (403724B21) to slot number 4. The installation of this kit uses both slots 4 and 5 to create the single x8 speed PCI Express slot. NOTE: The optional PCI-X expander (435670-B21) can utilize slot 6 to provide an additional two (2) 64-Bit PCI-X full length, full height slots. HP NC110T PCI Express Gigabit Server Adapter 434905-B21 Network Adapters HP NC150T PCI 4-port Gigabit 1000T Combo Switch Adapter 367132-B21 HP NC360T PCI Express Dual Port Gigabit Server Adapter 412648-B21 HP NC364T PCI Express Quad Port Gigabit Server Adapter 435508-B21 HP NC373T PCI Express Multifunction Gigabit Server Adapter 394791-B21

Page 16

HP NC373F PCI Express Multifunction Gigabit Server Adapter HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter HP NC7771 PCI-X 1000T Gigabit Server Adapter NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter. HP NC510F PCIe 10 Gigabit Server Adapter NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter. HP NC510C PCIe 10 Gigabit Server Adapter NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter.

394793-B21 394795-B21 313881-B21 290563-B21

414126-B21

414129-B21
Step 5 - Add More Storage
ProLiant ML350 G5 Storage Servers come standard with an embedded Smart Array E200i/128MB controller for internal drives. Select additional controllers from the list below to accommodate higher performance or external expansion. NOTE: Please consult specifications for available expansion slots when ordering additional storage controllers. NOTE: A single PCI Express slot with x8 Bus Speed can be achieved by attaching the x4/x8 PCIE Bus Expander option kit (403724B21) to slot number 4. The installation of this kit uses both slots 4 and 5 to create the single x8 speed PCI Express slot. NOTE: The optional PCI-X expander (435670-B21) can utilize slot 6 to provide an additional two (2) 64-Bit PCI-X full length, full height slots. Storage Controllers SAS Controllers Smart Array E200 Controller HP Smart Array E200/128 BBWC Controller Smart Array E500 Controller HP Smart Array E500/256MB Controller Smart Array P400 Controller HHP Smart Array P400/512MB BBWC Controller NOTE: Supports RAID 0/1/1+0/5/6. HP Smart Array P400/256MB Controller NOTE: Supports RAID 0/1/1+0/5. 512MB Battery-backed cache (BBWC) upgrade NOTE: for Smart Array P400 Controller. Battery-backed write cache (BBWC) upgrade NOTE: for Smart Array P400 Controller. Smart Array P400 Battery Attach Kit NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array P400 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions. Smart Array P600 Controller HP Smart Array P600/256 BBWC Controller NOTE: Supports external drive attach.
411508-B21 435129-B21 411064-B21 405132-B21 405148-B21 383280-B21 417836-B21

337972-B21

Page 17
512MB Battery-backed write cache (BBWC) upgrade NOTE: For Smart Array P600 Controller. Smart Array P800 Controller HP Smart Array P800/512 BBWC Controller NOTE: Supports external drive attach. NOTE: Please see the following Controller QuickSpecs for Technical Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and additional information: http://h18000.www1.hp.com/products/quickspecs/12460_div/12460_div.html (Smart Array E200 Controller) http://h18000.www1.hp.com/products/quickspecs/12700_div/12700_div.html (Smart Array E500 Controller) http://h18000.www1.hp.com/products/quickspecs/12400_div/12400_div.html (Smart Array P400 Controller) http://h18000.www1.hp.com/products/quickspecs/12247_div/12247_div.html (Smart Array P600 Controller) http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.html (Smart Array P800 Controller) SAS HBAs HP SC44Ge Host Bus Adapter HP 8 Internal Port SAS HBA with RAID NOTE: Please see the following QuickSpecs for additional information: http://h18004.www1.hp.com/products/quickspecs/12332_div/12332_div.html (SAS HBA) SCSI Controllers Smart Array 6402/128 Controller (PCI-X) NOTE: Ultra320 SCSI. Smart Array 6404/256 Controller (PCI-X) NOTE: Ultra320 SCSI. Smart Array 642 Controller (PCI-X) NOTE: Ultra320 SCSI. 128-MB Battery-Backed Write Cache (BBWC) NOTE: Supports the Smart Array E200 Controller, Smart Array 641 Controller, and Smart Array 642 Controller. Ultra320 Expansion Module for SA-6402 SCSI HBAs 64-Bit/133-MHz (PCI-X) Single Channel Ultra320 SCSI HBA G2 HP SC11Xe Host Bus Adapter (PCI-e) HP U320e SCSI Host Bus Adapter NOTE: Please see the following QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11943_div/11943_div.html (Single Channel Ultra320 SCSI HBA) http://h18000.www1.hp.com/products/quickspecs/11587_div/11587_div.html (Smart Array 6400 Series) http://h18000.www1.hp.com/products/quickspecs/12069_div/12069_div.html (Smart Array 642) DA - 12560 Worldwide Version 9 May 2, 2008

372538-B21

381513-B21

416096-B21 347786-B21

273915-B21 273914-B21 291967-B21 351580-B21
273911-B21 374654-B21 412911-B21 AH627A

Page 18

http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html (SC11Xe HBA)
Fibre-channel Host Bus Adapters
NOTE: For the complete listing of Fibre Channel Host Bus Adapters, please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html HP StorageWorks FC2142SR 4Gb PCI-e HBA HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA HP StorageWorks FC1142SR 4Gb PCI-e HBA HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA HP StorageWorks FC2143 4Gb PCI-X 2.0 -to-Fibre Channel HBA HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 HBA HP StorageWorks FC1143 4Gb PCI-X 2.0 HBA HP StorageWorks FC1243 Dual Channel 4Gb PCI-X 2.0 HBA
A8002A A8003A AE311A AE312A AD167A AD168A AB429A AE369A
External Storage Enclosures
HP StorageWorks Modular Smart Arrays HP StorageWorks Modular Smart Array 20 NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies HP StorageWorks Modular Smart Array 20 Starter Kit NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies. Includes Smart Array 6402/128 Controller. NOTE: The Modular Smart Array Enclosure 20 Family supports the SATA 1.5Gb/s 3.5" Hot Plug Hard Drives. HP StorageWorks Modular Smart Array 30 Single Bus NOTE: Rack-mountable 14 drive (SCSI) drive enclosure with single bus, redundant power supplies. HP StorageWorks Modular Smart Array 30 Dual Bus NOTE: Rack-mountable 14 drive (SCSI) drive enclosure with dual bus, redundant power supplies. NOTE: The Modular Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320 Hot Plug Hard Drives HP StorageWorks Modular Smart Array 50 Enclosure NOTE: Please see the Modular Smart Array 50 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/12245_div/12245_div.html (Worldwide) HP StorageWorks 60 Modular Smart Array NOTE: Rack-mountable 12 drive (3.5" SAS/SATA) enclosure with 3Gb/s SAS host connectivity and redundant power supplies. HP StorageWorks MSA60 1.8TB SAS HDD Bundle (MSA60 w/12 146GB 15K SAS LFF HDD) HP StorageWorks MSA60 9TB SATA HDD Bundle (MSA60 w/12 750GB 15K SATA LFF HDD) HP StorageWorks MSA60 3.6TB SAS HDD Bundle (MSA60 w/12 300GB 15K SAS LFF HDD)

335921-B21

366172-B21

302969-B21

302970-B21

364430-B21

418408-B21

AG822A AG823A AG824A

Page 19
NOTE: The MSA60 bundles are available in the Americas, Asia Pacific (AP) and Japan only. They are not available in Europe, Middle East and Africa. HP StorageWorks 70 Modular Smart Array NOTE: Rack-mountable 25 drive (2.5" SAS/SATA) enclosure with 3Gb/s SAS host connectivity and redundant power supplies. HP StorageWorks MSA70 1.8TB SAS HDD Bundle (MSA70 w/25 72GB 15K SAS SFF HDD) HP StorageWorks MSA70 3.6TB SAS HDD Bundle (MSA70 w/25 146GB 10K SAS SFF HDD) NOTE: The MSA70 bundles are available in the Americas, Asia Pacific (AP) and Japan only. They are not available in Europe, Middle East and Africa. HP StorageWorks Modular Smart Array 500 Generation 2 NOTE: Please see the Modular Smart Array 500 Generation 2 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11956_div/11956_div.html (Worldwide) HP StorageWorks 1000 Modular Smart Array NOTE: This array enclosure requires addition of a Fibre Channel Host Bus Adapter NOTE: Please see the Modular Smart Array 1000 QuickSpecs for additional options and configuration information at http://h18000.www1.hp.com/products/quickspecs/11033_div/11033_div.html (Worldwide) HP StorageWorks 1500 cs Modular Smart Array NOTE: This array enclosure requires addition of a Fibre Channel Host Bus Adapter NOTE: Please see the StorageWorks Modular SAN Array 1500 cs QuickSpecs for additional options and configuration information at: http://www.hp.com/go/MSA1500cs

418800-B21

AG825A AG893A

335880-B21

201723-B22

AA986A

Hard Drives
Serial Attached SCSI (SAS) Hard Drives Hot Plug 3.5" (LFF) SAS HP 300GB 3G SAS 15K 3.5" SP HDD HP 300GB 3G SAS 15K 3.5" DP HDD HP 146GB 3G SAS 15K 3.5" SP HDD HP 146GB 3G SAS 15K 3.5" DP HDD HP 72GB 3G SAS 15K 3.5" SP HDD HP 72GB 3G SAS 15K 3.5" DP HDD Hot Plug 2.5" (SFF) SAS HP 146GB 3G SAS 10K SFF SP HDD HP 146GB 3G SAS 10K SFF DP HDD HP 72GB 3G SAS 10K SFF SP HDD HP 72GB 3G SAS 10K SFF DP HDD HP 72GB 3G SAS 15K SFF SP HDD HP 72GB 3G SAS 15K SFF DP HDD HP 36GB 3G SAS 15K SFF SP HDD
431944-B21 416127-B21 375872-B21 384854-B21 375870-B21 384852-B21 431958-B21 418367-B21 375861-B21 384842-B21 431935-B21 418371-B21 431933-B21

Page 20

HP 36GB 3G SAS 15K SFF DP HDD NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide) Serial ATA (SATA) Hard Drives Hot Plug 3.5" (LFF) SATA HP 750GB SATA 7.2K 3.5" HDD HP 500GB SATA 7.2K 3.5" HDD HP 250GB SATA 7.2K 3.5" HDD Hot Plug 2.5" (SFF) SATA HP 120GB SATA 5.4K SFF HDD HP 60GB SATA 5.4K SFF HDD NOTE: SATA hard drives have a 1-year warranty. Please see the SATA Hard Drive QuickSpecs for additional technical information on the hard drives Support details, please see the following: http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html (Worldwide) Ultra320 SCSI Hard Drives Hot Plug 3.5" U320 SCSI Drives HP 300GB U320 15K Universal HDD HP 300 GB U320 10K Universal HDD HP 146 GB U320 10K Universal HDD HP 72GB U320 10K Universal HDD HP 36 GB U320 15K Universal HDD HP 72 GB U320 15K Universal HDD HP 146GB U320 15K Universal HDD NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates.

418369-B21

432341-B21 395473-B21 349239-B21 431786-B21 379306-B21
411089-B22 350964-B22 286716-B22 286714-B22 286776-B22 286778-B22 347708-B22

Page 21

Step 6 - Add Optional Software
Microsoft iSCSI Software Target Microsoft iSCSI Software Target adds block storage capability to ProLiant Storage Servers and creates a single platform that delivers file, print, and application storage services, all over existing Ethernet networks. It is a powerful iSCSI software solution that provides affordable application storage provisioning, protection, and availability for small and medium office environments. It helps administrators consolidate storage capacity, improve storage utilization, minimize system downtime, simplify backup operations, enable rapid recovery, and provides high availability for key applications and services. Microsoft iSCSI Target Software 1 LTU NOTE: For more information go to HP's Microsoft iSCSI Software Target website at: http://h18006.www1.hp.com/products/storageworks/ms_iscsi/index.html

AF503A AF504A AF505A AF506A AF507A AF508A AF509A AF510A AF914A AF915A
Modular PDUs 1U/0U (Up to 32 outlets) NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 and 9000 series racks).
3.6kVA Model - mPDU, 16A, High (WW) 2.8 kVA Model - mPDU, 24A, Low (NA/JPN) 4.9kVA Model - mPDU, 24A, High (NA/JPN) 7.3kVA Model - mPDU, 32A, High (INT'L) 8.3kVA Model - mPDU, 40A, High (WW) 8.3kVA Model - mPDU, 40A, High (power cord attached) (NA/JPN) 9.2kVA Model - mPDU, 40A, High (power cord attached) (INTL) 8.3kVA Model - mPDU 40A, High (core only) (NA/JPN) 9.2kVA Model - mPDU 40 A, High (core only) (Int'l) 8.3kVA Model - mPDU 32A, High (core only) (Int'l) 4.9kVA Model - mPDU 24A, High (core only) (NA/JPN) NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs) QuickSpecs for additional options including shorter jumper cables and country specific power cords: http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html (Worldwide)
252663-B24 252663-D71 252663-D72 252663-B31 252663-B21 252663-D73 252663-B32 252663-D75 252663-B34 252663-B33 252663-D74

USB Options

HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver) USB 1.44-MB External Diskette Drive (Carbonite) HP USB 04 Standard Keyboard HP 1GB USB 2.0 Floppy Drive Key HP 256MB USB 2.0 Floppy Drive Key
DC172B DC141B DT528A#ABA 442085-B21 442084-B21

Page 27

HP Rack 5000 Series (Graphite Metallic)
HP 5642 Rack-Unassembled NOTE: Please see the HP Rack 5642 QuickSpecs for additional part numbers and Technical Specifications such as height, width, depth, weight, and color: http://h18000.www1.hp.com/products/quickspecs/12074_div/12074_div.html (Worldwide) NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower.

358254-B21

10642 G2 (42U) Rack Cabinet Pallet HP Rack 10000 G2 Series (Carbon/ Graphite 10642 G2 (42U) Rack Cabinet Shock Pallet Metallic) 10642 G2 (42U) Rack Cabinet Crated 10642 G2 (42U) Rack Cabinet, with Extension Shock Pallet 10636 G2 (36U) Rack Cabinet Pallet 10636 G2 (36U) Rack Cabinet Shock Pallet 10636 G2 (36U) Rack Cabinet Crated 10636 G2 (36U) Rack Cabinet, with Extension Shock Pallet 10622 G2 (22U) Rack Cabinet - Pallet 10622 G2 (22U) Rack Cabinet - Shock Pallet 10842 G2 (42U) 800mm Wide Rack Cabinet - Pallet 10842 G2 (42U) 800mm Wide Rack Cabinet - Shock Pallet 10647 G2 (47U) Rack Cabinet - Pallet NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed. NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color: http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html (Worldwide) NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower.

AF001A AF002A AF003A AF004A AF011A AF012A AF013A AF014A AF021A AF022A AF041A AF042A AF031A
HP Rack 10000 Series (Graphite Metallic)
HP S10614 (14U) Rack Cabinet Shock Pallet NOTE: NOTE xxxxxx-B21 (pallet) used to ship empty racks shipped on a truck. -B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels). xxxxxx-B23 (crated) used for air shipments of empty racks. NOTE: NOTE It is mandatory to use a shock pallet in order to ship racks with equipment installed. Not all Compaq equipment is qualified to be shipped in the Rack 10000 series. NOTE: NOTE Please see the Rack 10000 QuickSpecs for additional options and Technical Specifications such as height, width, depth, weight, and color: http://h18000.www1.hp.com/products/quickspecs/10995_div/10995_div.html (Worldwide) NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower

292302-B22

Page 28
Keyboards and Monitors TFT7210R Rack Mounted 17" Monitor TFT7600 Rackmount Keyboard Monitor US TFT7600 Rackmount Keyboard Monitor UK TFT7600 Rackmount Keyboard Monitor GR TFT7600 Rackmount Keyboard Monitor FR TFT7600 Rackmount Keyboard Monitor IT TFT7600 Rackmount Keyboard Monitor SP TFT7600 Rackmount Keyboard Monitor DEN TFT7600 Rackmount Keyboard Monitor NOR TFT7600 Rackmount Keyboard Monitor SE/FI
348373-B21 AG052A AG053A AG054A AG055A AG056A AG057A AG058A AG059A AG060A AG061A AG062A AG063A AG064A AG065A AG066A AG072A AG073A AG074A AG075A AG076A AG077A AG078A AG079A AG080A AG081A AG082A AG083A AG084A AG085A AG086A
TFT7600 Rackmount Keyboard Monitor SWI TFT7600 Rackmount Keyboard Monitor PORT TFT7600 Rackmount Keyboard Monitor BEL TFT7600 Rackmount Keyboard Monitor JPN2 TFT7600 Rackmount Keyboard Monitor RUS TFT7600 Rackmount Keyboard Monitor INTL 1U Rackmount Keyboard with USB, US 1U Rackmount Keyboard with USB, UK 1U Rackmount Keyboard with USB, GR 1U Rackmount Keyboard with USB, FR 1U Rackmount Keyboard with USB, ITL 1U Rackmount Keyboard with USB, SP 1U Rackmount Keyboard with USB, DEN 1U Rackmount Keyboard with USB, NOR 1U Rackmount Keyboard with USB, SE/FI 1U Rackmount Keyboard with USB, SWI 1U Rackmount Keyboard with USB, PORT 1U Rackmount Keyboard with USB, BEL 1U Rackmount Keyboard with USB, JPN2 1U Rackmount Keyboard with USB, RUS 1U Rackmount Keyboard with USB, INTL NOTE: For additional information regarding Rack Options, please see the following URL: http://www.hp.com/go/rackandpower.

Page 35

MSL6000 HP StorageWorks SAS Tape Automation, External 1/8 G2 Autoloader MSL2024 MSL4048 MSL8096 HP StorageWorks Fibre Tape Automation, External Externa MSL2024 MSL4048 MSL6000 HP StorageWorks D2D Backup Systems D2D110 D2D120 External
Please consult the EBS connectivity matrix at: http://www.hp.com/go/ebs for detailed connectivity information.

416096-B21

Embedded Network Controller

Page 36

Power Specifications
Part Number Spare Kit Operational Input Voltage Range (V rms) Frequency Range (Nominal) (Hz) Nominal Input Voltage (Vrms) Max Rated Output Wattage Rating Nominal Input Current (A rms) Max Rated Input Wattage Rating (Watts) Max. Rated VA (Volt-Amp) Efficiency (%) Power Factor Leakage Current (mA) Maximum Inrush Current (A peak) Maximum Inrush Current duration (miliseconds) 380622-001 403781-- - 63 (50 / 60) 9.0.99 0.7.0.99 0.4.0.96 0.65 30

4.0.96 0.3

3.0.95 0.72 34

3.0.95 0.75 35

NOTES: ActiveAnswers Power Calculation Power calculator is LIVE on ActiveAnswers Web site. This is an external link. Follow this link: http://h30099.www3.hp.com/configurator/powercalcs.asp To drill down to calculators: - Click on: "ProLiant Servers" - Click on the Server of interest. Example: ML350 G5 - Click on: "Power Calculator" link. (You may need to scroll down to see it)

Page 37

Technical Specifications
System Unit Tower Dimensions (H x W x D) (with feet/bezel) Rack Dimensions (H x W x D) (with feet/bezel) Tower Weight (approximate) Rack Weight (approximate) Max Input Requirements (per power supply)
3.38 x 17.54 x 26.01 in (8.59 x 44.54 x 66.07 cm)
8.54 x 17.5 x 21.9 in. (21.7 x 44.5 x 55.7cm)
All hard drives, power supplies, and processors installed All hard drives, power supplies, and processors installed Rated Line Voltage

67 lb (30.4 kg)

61 lb (27.7 kg)

BTU Rating

100 VAC, 120 VAC 200 -- 240 VAC Rated Input Current 10A (at 100 VAC) 9A (at 120 VAC) 6.1A (at 200 VAC) Rated Input Frequency 50 to 60 Hz Rated Input Power 980W (at 100 VAC) 1035W (at 120 VAC) 1170W (at 240 VAC) BTU/HR 3350 BTU/hr (at 100 VAC) 3530 BTU/hr (at 120 VAC) 3990 BTU/hr (at 240 VAC) To review typical system power ratings use the Power Calculator which is available via the online tool located at URL: http://h30099.www3.hp.com/configurator/calc/Power% 20Calculator%20Catalog.xls

HP ProLiant ML350 G5 Storage Server installation guide
This guide provides installation and conguration information for the HP ProLiant ML350 G5 Storage Server with Microsoft Windows Storage Server 2003 R2.

5697-5855

Part number: 5697-5855 First edition: September 2006
Legal and notice information Copyright 2006 Hewlett-Packard Development Company, L.P. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and tness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Hewlett-Packard. The information contained in this document is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting as additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft, Windows, and Windows NT are U.S. registered trademarks of Microsoft Corporation. UNIX is a registered trademark of The Open Group. Hewlett-Packard Company shall not be liable for technical or editorial errors of omissions contained herein. The information is provided as is without warranty of any kind and is subject to change without notice. The warranties for Hewlett-Packard Company products are set forth in the express limited warranty statements for such products. Nothing herein should be construed as constituting an additional warranty.

Contents

About this guide.
Intended audience. Getting help. Related documentation. Conventions. Document conventions and symbols Text symbols. HP technical support. HP subscribers choice. HP-authorized reseller. Other helpful web sites. HP hardware support services..

1 Setup overview

Planning for installation. Planning a network conguration. Conguration checklist.

2 Installing the server.

Checking kit contents. Becoming familiar with front/back panels. Locating and writing down the serial number Cabling the server. Powering on the server.
3 Accessing the HP Storage Server Management console. 29
Using Using Using Using the the the the Direct attach method. Remote browser method. Remote desktop method. Integrated Lights-Out 2 method.
4 Conguring the server on the network.
HP ProLiant ML350 G5 Storage Server
Before you begin. Running the Rapid Startup Wizard.
5 Complete system conguration. A Conguring storage server for Web access (optional).
Setting up an Internet connection
Additional conguration tasks.

Figures

1 Deciding upon a network access method 2 Kit contents. 3 Front panel. 4 Back panel. 5 Cable connections. 6 Power on button. 7 Internet options screen. 8 iLO 2 connector port. 9 Rapid Startup Wizard. 10 Automatic conguration settings. 11 Proxy server settings. 44

Tables

Document conventions. Network access methods. Installation and Conguration checklist Server conguration worksheet. 8. 15. 17. 37

About this guide

This guide provides information for setting up and conguring the following HP ProLiant Storage Server models: HP ProLiant ML350 GGB Storage Server HP ProLiant ML350 G5 1.5 TB Storage Server HP ProLiant ML350 GTB Storage Server This guide is available on the HP web site and is also provided as a PDF document on the HP ProLiant Storage Server documentation CD.

Intended audience

This book is intended for use by technical professionals who are experienced with the following: Microsoft administrative procedures System and storage congurations

Getting help

If you still have a question after reading this guide, contact an HP authorized service provider or access our web site: http://www.hp.com. NOTE: Known issues and work arounds for the storage server products and the service release are addressed in release notes. To view the latest version, visit http://www.hp.com/go/support. Select See support and troubleshooting information and enter a product name/number. Under self-help resources, select manuals (guides, supplements, addendums, etc.).

Related documentation

In addition to this guide, refer to the following documents for more information: HP ProLiant ML350 G5 Storage Server administration guide
HP Integrated Lights-Out 2 User Guide These documents are available on the Documentation CD or they can be obtained at http://www.hp.com/go/storageservers. Select your product, then click Technical documentation under the Support section.

Conventions

This document contains the following conventions and symbols: Document conventions Text symbols
Document conventions and symbols
Table 1 Document conventions Convention Blue text Medium blue, underlined text (http:// www.hp.com) Bold font Element Cross-reference links and e-mail addresses Web site addresses
Key names Text typed into a GUI element, such as into a box GUI elements that are clicked or selected, such as menu and list items, buttons, and check boxes Text emphasis File and directory names System output Code Text typed at the command line

Italic font Monospace font
Monospace, italic font Monospace, bold font
Code variables Command-line variables Emphasis of le and directory names, system output, code, and text typed at the command line

Text symbols

WARNING! Indicates that failure to follow directions could result in bodily harm or death.
CAUTION: Indicates that failure to follow directions could result in damage to equipment or data.
IMPORTANT: Provides clarifying information or specic instructions.
NOTE: Provides additional information.
TIP: Provides helpful hints and shortcuts.

HP technical support

Telephone numbers for worldwide technical support are listed on the HP support web site: http://www.hp.com/support/. Collect the following information before calling: Technical support registration number (if applicable) Product serial numbers Product model names and numbers Applicable error messages Operating system type and revision level Detailed, specic questions
For continuous quality improvement, calls may be recorded or monitored.

HP subscribers choice

HP strongly recommends that customers sign up online using the Subscribers choice web site: http://www.hp.com/go/e-updates. Subscribing to this service provides you with e-mail updates on the latest product enhancements, newest versions of drivers, and rmware documentation updates, as well as instant access to numerous other product resources. After signing up, you can quickly locate your products by selecting Business support, and then Storage under Product Category.

HP-authorized reseller

For the name of your nearest HP-authorized reseller: In the United States, call 1-800-282-6672. Elsewhere, visit the HP web site: http://www.hp.com. Then, click Contact HP to nd locations and telephone numbers.

Other helpful web sites

For other product information, see the following HP web sites: http://www.hp.com/go/storage http://www.hp.com/support/ http://www.docs.hp.com http://www.microsoft.com
HP hardware support services
HP Instant Support Enterprise Edition (ISEE) provides proactive remote monitoring, diagnostics, and troubleshooting to help you enhance the availability of your servers, as well as storage and network devices. The ISEE software is located on the storage server in the c:\hpnas\components\ISEE folder. For more information, go to the HP web site: http://h20219.www2.hp.com/services/cache/ 10707-0-0-225-121.aspx. HP Services provides service tools that notify you when a signicant system event has or will occur. These tools, WEBES System Event Analyzer (SEA) and OSEM, are used both as part of the ISEE remote service offering and as standalone tools to HP service customers. They are designed to send a notication only when an event or series of events has occurred that require service action. They are not intended to be real-time system state monitors

that trigger with every event. Most system components have the capability of sending hundreds of state events during normal operation. SEA and OSEM are designed to lter these component events and only notify customers and/or HP Services when action needs to be taken to resolve or prevent an outage. As designed they will not report all events. Other utilities are available to monitor real time system state. The software is located on the storage server in the c:\hpnas\components\ISEE\OSEM and c:\hpnas\components\ISEE\WEBES folders.
Your HP ProLiant storage server comes pre-installed with the Windows Storage Server 2003 R2 operating system. Windows Storage Server 2003 R2 extends the Windows Storage Server 2003 operating system, providing a more efcient way to manage and control access to local and remote resources. In addition, Windows Storage Server 2003 R2 provides a scalable, security-enhanced Web platform for simplied branch server management, improved identity and access management, and more efcient storage management.
Planning for installation
Before you install your HP ProLiant storage server, you need to make a few up-front decisions.
Determining a network access method
Before beginning setup and startup procedures, you should decide upon an access method to connect to the storage server. The type of network access you select is determined by whether or not the network has a Dynamic Host Conguration Protocol (DHCP) server, as shown in "Deciding upon a network access method" on page 14. "Network access methods" on page 15 shows the types of network access methods that are available and provides more information about each one.

DHCP Access? y/n

No Direct Attach* (mandatory)

Remote Browser

Remote Desktop

Direct Attach*

Integrated Lights-Out 2
*Direct Attach requires display, keyboard, and mouse.
Figure 1 Deciding upon a network access method

Setup overview

Table 2 Network access methods Access method I.E. 5.5 or later required? No Storage server desktop accessible? Yes HP ProLiant Rapid Startup Wizard access Directly from the storage server desktop. Directly from the HP ProLiant Storage Server Management console. Indirectly from the storage server desktop. Indirectly from the storage server desktop. Notes

Direct attachment

Requires a monitor, mouse, and keyboard. Does not display the storage server desktop.

Remote browser

Remote desktop
Windows remote desktop capability required on client. See the HP Integrated Lights-Out 2 User Guide for server access instructions.
HP Integrated Lights-Out 2 (iLO 2) connectivity
Planning a network conguration
You use the Rapid Startup Wizard to congure your storage server. This wizard is displayed automatically when you rst start your system. Before you run the Rapid Startup Wizard, it is helpful to gather together the network conguration information you need, including: User name and administrator password (the system provides you with defaults you need to change) E-mail addresses to set up system alerts SNMP settings Local area network (LAN) conguration settings To help you gather this information, see "Conguring the server on the network" on page 37.

Conguration checklist

Use the following checklist to make sure you have completed all conguration tasks for your HP ProLiant storage server. The steps for each task are explained in more detail in subsequent chapters of this guide.
Table 3 Installation and Conguration checklist Steps 1. Unpack server, check kit contents, and become familiar with front and back panels of storage server. Locate and write down serial number of storage server. 2. If you purchased the Tower to Rack conversion kit, complete the rail installation instructions. 3. Connect cables; (optional) connect a keyboard, mouse, and monitor; power on server, and log in to the server. 4. Access the HP Storage Server Management console. Direct attach method Remote browse method Remote desktop method iLO 2 method 5. Complete the storage server conguration worksheet. 6. Run Rapid Startup Wizard. 7. Complete system conguration. 8. Congure storage server for Web access, if necessary. Reference See "Checking kit contents" on page 19.
See the HP ProLiant rail installation instructions, if applicable. See "Cabling the server" on page 23, Powering on the server, and Direct attach method. See "Accessing the HP Storage Server Management console" on page 29.
See "Server conguration worksheet" on page 37. See "Rapid Startup Wizard" on page 40. See "Complete system conguration" on page 41. See "Conguring storage server for Web access (optional)" on page 43.

2 Installing the server

To install your HP ProLiant storage server, follow the instructions in the sections below: Checking kit contents Becoming familiar with front/back panels Cabling the server Powering on the server

Checking kit contents

Remove the contents, making sure you have all the components shown in the gure below. If components are missing, contact HP technical support.
ProLia nt Essen tials Integra

ted Lig hts

Advan ced
Figure 2 Kit contents 1 HP ProLiant ML350 G5 Storage Server (with operating system preloaded) Power cord Product Documentation and Safety and Disposal Documentation CD HP ProLiant Storage Server System Installation and Recovery DVD 5 End User License Agreement

Certicate of Authenticity Card ProLiant Essentials Integrated Lights-Out 2 Advanced Pack
Becoming familiar with front/back panels
Become familiar with the function of the front/back panels on the server as shown in the gures below.

Installing the server

gl0063
Figure 3 Front panel Removable media bays (4) DVD-RW drive Hot-plug hard drive bays (6bay drive cage model) USB connectors (2)

gl0065

Figure 4 Back panel
Video connector Serial connector USB connectors (2) RJ-45 Ethernet connector (iLO 2 management) RJ-45 Ethernet connector (data) PCI Express x8 slots (x4 routed) PCI-X slots (100 MHz) PCI-X slots (133 MHz) Redundant hot-plug power supply Mouse connector Keyboard connector Power cord connector
Locating and writing down the serial number
Before completing the installation portion of this guide, locate and write down the storage servers serial number, which may be needed to access the HP Storage Server Management console later on during the set up process. The HP ProLiant storage servers serial number is located in three places:
Top of the storage server Back of the storage server Inside the storage server shipping box

Cabling the server

Connect the cables in the sequence shown in the gure below.

gl0081

Figure 5 Cable connections
Monitor iLO 2 cable Network cable Power cord connector 7 Mouse Keyboard Power cord connector
NOTE: Connecting the power cord illuminates the LEDs on the front of the bezel, the Systems Insight Display LED, and the LEDs on the NIC connector (rear panel). The iLO 2 NIC LED (rear panel) illuminates if the iLO 2 port is connected. Connecting the power cord also restores the storage server to whatever previous powered state it was last in. This could result in the server powering up, the fans operating, and the power indicator coming on.
NOTE: The keyboard, mouse, and monitor are used only for the "Direct attach method" on page 29. They are not provided with your storage server.

Powering on the server

Power on the server after connecting the cables. 1. Power on server by pushing the power button (1). The power LED (2) illuminates green.

gl0082

Figure 6 Power on button 2. When the server powers on, an installation progress screen is displayed. The installation process takes approximately 10 to 15 minutes to complete and the server will reboot twice. No user interaction is required. CAUTION: Do not interrupt the installation process; when the installation sequence is complete, the system prompt appears. 3. By now you should have determined the access method for your storage server. For more information, see "Deciding upon a network access method" on page 14.

4. Go to "Accessing the HP Storage Server Management console" on page 29 to set up server access.
3 Accessing the HP Storage Server Management console
Before accessing the HP Storage Server Management console, verify that the storage server is completely installed in the rack, and that all cables and cords are connected. To access the HP Storage Server Management console, you can use these access methods: Direct attach Remote browser To connect directly to the storage server without using the network. To establish a browser-based connection to the HP ProLiant Storage Server Management console from a remote client running Internet Explorer 5.5 (or later). To establish a connection from a remote client without using a browser. This method requires the client to have Windows remote desktop capability. To establish a browser-based connection from a remote client using the iLO 2 interface.
HP Integrated Lights-Out 2 (iLO 2)
For more information, see "Planning for installation" on page 13. IMPORTANT: An IP address can be substituted for a storage servers serial number and hyphen when using either remote browser or remote desktop methods to access the HP Storage Server Management console. For example: 192.0.0.1 can be substituted for TWT08466-.
Using the Direct attach method
You can access the HP Storage Server Management console using a monitor, mouse, and keyboard directly attached to the storage server. To connect the storage server to a network using the direct attach method
1. Log in to the HP ProLiant Storage Server with the default user name administrator and the password hpinvent. The HP ProLiant Data Protection Storage Server Management console and Rapid Startup Wizard will start automatically. NOTE: You can change the administrator name and password when you congure the server using the "Rapid Startup Wizard" on page 40. 2. To complete network conguration using the Rapid Startup Wizard, see "Conguring the server on the network" on page 37.
Using the Remote browser method
The storage server ships with DHCP enabled on the network port. If the server is placed on a DHCP-enabled network and the serial number of the device is known, the server can be accessed through a client running Internet Explorer 5.5 (or later) on that network, using the TCP/IP 3202 port. IMPORTANT: Before you begin this procedure, ensure that you have the following: Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same local network as the storage server DHCP-enabled network Serial number or IP address of the storage server To connect the server to a network using the remote browser method, you must rst ensure that the client is congured to download signed ActiveX controls. To enable ActiveX controls 1. On the remote client machine, open the Internet Explorer web browser and select Tools > Internet Options > Security.

Accessing the HP Storage Server Management console
Figure 7 Internet options screen 2. On the Security screen, select Internet or Local intranet web content zone, then click Custom Level. 3. Scroll down to locate the ActiveX Controls and plug-ins settings. 4. At Download signed ActiveX controls settings, select Enable to enable ActiveX or Prompt to launch a notice requiring approval before ActiveX is enabled.
5. Click OK to close the Security Settings dialog box. 6. If prompted Are you sure you want to change the security settings for this zone click YES.
7. On the Internet Options dialog box, click OK to nish. To connect the storage server to a network using the remote browser method 1. On the remote client machine open Internet Explorer and enter https:// and the serial number of the storage server followed by a hyphen (-), and then:3202. For example, https://D4059ABC3433-:3202 Press Enter. NOTE: If you are able to determine the IP address from your DHCP server, you can substitute the IP address for the serial number and hyphen (-). For example: 192.100.0.1:3202. 2. Click OK on the Security Alert prompt. 3. Log in to the HP ProLiant Storage Server Management console with the default user name administrator and the password hpinvent. NOTE: You can change the administrator name and password when you congure the server using the "Rapid Startup Wizard" on page 40. 4. To complete network conguration using the Rapid Startup Wizard, see "Conguring the server on the network" on page 37. IMPORTANT: If you are using the remote browser method to access the HP Storage Server Management console and Rapid Startup Wizard, always close the remote session before closing your Internet browser. Closing the Internet browser does not close the remote session. Failure to close your remote session impacts the limited number of remote sessions allowed on the storage server at any given time.
Using the Remote desktop method
To connect the storage server to a network using the remote desktop method 1. On the PC client, select Start > Run. At Open, type mstsc, then click OK.

2. Enter the serial number of the storage server followed by a hyphen (-) in the Computer box and click Connect. For example: D4059ABC3433-. NOTE: If you are able to determine the IP address from your DHCP server, you can substitute the IP address for the serial number and hyphen (-). For example: 192.100.0.1. 3. Log in to the HP ProLiant Storage Server with the default user name administrator and the password hpinvent. The HP ProLiant Data Protection Storage Server Management console and Rapid Startup Wizard will start automatically. NOTE: You can change the administrator name and password when you congure the server using the "Rapid Startup Wizard" on page 40. 4. To complete network conguration using the Rapid Startup Wizard, see "Conguring the server on the network" on page 37.
Using the Integrated Lights-Out 2 method
The HP iLO 2 management processor provides multiple ways to congure, update, operate, and manage servers remotely. The HP ProLiant Storage Server comes precongured with iLO 2 default factory settings, including a default user account and password. These settings can be found on the iLO 2 Default Network Settings tag found on the front of the server. If iLO 2 is connected to a network running DNS and DHCP, you can use it immediately without changing any settings. For more information on using HP iLO 2, see the HP Integrated Lights-Out 2 User Guide.
To quickly setup iLO 2 using the default settings for iLO 2 Standard and iLO 2 Advanced features, follow the steps below 1. Ensure that a network cable is connected to the iLO 2 port (1) located on the back of the storage server.

gl0083

Figure 8 iLO 2 connector port NOTE: This connection method is easiest when the connection is to a DHCP and DNS supported network. 2. If not using dynamic DHCP (IP addressing), you will need to input a static IP address by using the direct attach method and the iLO 2 RBSU. 3. Using the methods described in the HP Integrated LightsOut 2 User Guide, connect to the iLO 2 port.
NOTE: To nd the default iLO 2 log in settings, see the iLO 2 Default Network Settings card attached to your server. The default DNS, administrator name, and password needed to log in will be on this card. 4. If desired, you can change the default user name and password on the administrator account to your predened selections. 5. Set up your user accounts, if using the local accounts feature. 6. Activate iLO 2 advanced features by entering a license key from the included ProLiant Essentials Integrated Lights-Out 2 Advanced Pack. 7. Access the HP ProLiant Storage Server using the iLO 2 Remote Console functionality. Log in to the HP ProLiant Storage Server with the default user name administrator and the password hpinvent. The HP ProLiant Storage Server Management console starts automatically. NOTE: When the Remote Console feature is enabled, you can get access to the storage servers login screen. For more information, see the HP Integrated Lights-Out 2 User Guide on the HP ProLiant ML350 G5 Storage Server Documentation CD.

WINS server

Server Name Server name Assign a unique name to the storage server. This name identies the storage server on the network.
Running the Rapid Startup Wizard
The Rapid Startup Wizard is only displayed during the initial setup process. This wizard guides you through the conguration process.
Figure 9 Rapid Startup Wizard The Rapid Startup Wizard guides you through conguring the following system settings: Date, time, and time zone Administrator Identity (user name and password) Alert e-mail notication Integrated Lights-Out 2 (iLO 2) settings Simple Network Management Protocol (SNMP) Settings Network Interfaces Server Name For more information about the conguration settings available in the Rapid Startup Wizard, click Help to see the corresponding Rapid Startup Wizard online help topic.
5 Complete system conguration
Additional conguration tasks
The physical installation and basic conguration for the HP ProLiant storage server is complete. Additional settings and conguration tasks specic to the storage server role can be found in the HP ProLiant ML350 G5 Storage Server administration guide on the HP ProLiant Storage Server Documentation CD. The HP ProLiant Storage Server administration guide includes: Conguring and managing the le server role Conguring and managing the print server role Other network le and print services Microsoft Cluster Service (applicable models only) NIC teaming
IMPORTANT: HP recommends performing a full system backup before putting the system into production. Other conguration tasks not found in the HP ProLiant ML350 G5 Storage Server administration guide that should be performed include: Run Microsoft Update for new critical updates, see "Conguring storage server for Web access (optional)" on page 43. Join the storage server to an Active Directory domain or workgroup. Create and manage users and groups. Adjust logging for system, application and security events. Install additional third-party software, such as backup, anti-virus, or monitoring agents.
Complete system conguration
A Conguring storage server for Web access (optional)
Before running Windows 2003 R2 operating system updates, you must set up an Internet connection for the storage server. There are two methods for conguring an Internet connection: Internet Explorer to use automatic conguration Internet Explorer to use a proxy server To congure Internet Explorer to use automatic conguration On the Tools menu in Internet Explorer, click Internet Options, click the Connections tab, and then click LAN Settings. 2. Under Automatic Conguration, click either the Automatically detect settings or Use automatic conguration script check box. 1.

Figure 10 Automatic conguration settings 3. Click OK to close the LAN Settings dialog box. 4. Click OK again to close the Internet Options dialog box. To congure Internet Explorer to use a proxy server 1. On the Tools menu in Internet Explorer, click Internet Options, click the Connections tab, and then click LAN Settings.
2. Under Proxy server, click the Use a proxy server for your LAN check box.
Figure 11 Proxy server settings 3. In the Address box, type the network name or IP address of the proxy server. 4. In the Port box, type the port number that is used by the proxy server for client connections (for example, 8080). 5. Click the Bypass proxy server for local addresses check box if you do not want the proxy server computer to be used when you connect to a computer on the local network. 6. Click OK to close the LAN Settings dialog box. 7. Click OK again to close the Internet Options dialog box.
Conguring storage server for Web access (optional)
help, obtaining, 7 host conguration protocols, DHCP and non-DHCP, 37 HP authorized reseller, 10 hardware support services, 10 storage web site, 10 Subscribers choice web site, 10 technical support, 9 HP Storage Server Management console iLO 2 method, 34 direct attach method, 29 remote browser method, 34 remote desktop method, 34 remote server access, 29
accessing HP Storage Server Management console, 29 ActiveX enabling, 30 audience, 7 authorized reseller HP, 10
cable installation, 23 conguration completing system conguration, 41 Internet, 43 network, 16 server, 37 worksheet, 37 conventions document, 8 text symbols, 9
default login, 30 DHCP, 37 document conventions, 8 related documentation, 7
iLO 2 method connecting to network, 35 installation planning, 13 server, 19 Internet automatic conguration, 43 proxy server, 43 set up, 43 ISSE See hardware support services
hardware support services, 10

kit contents, 19

planning conguration checklist, 16 installation, 13 network access method, 13 network conguration, 16 power on server, 26
set up Internet, 43 setting up overview, 13 startup collecting information, 37 Subscribers choice HP, 10 symbols in text, 9
Rapid Setup Wizard, 40 related documentation, 7 remote browser method connecting to network, 32 remote desktop method connecting to network, 32
technical support HP, 9 text symbols, 9
serial number, 22 server cabling, 23 front and back panels, 20 installation, 19 power on, 26

web sites HP documentation, 10 HP storage, 10 HP Subscribers choice, 10