User Guide 1

Print a self-test report...42 Work with print cartridges...Troubleshooting information....51 Before you call HP Support....51 View the Readme file....52 Setup troubleshooting...52 Operational troubleshooting....62 Device update...Get HP support....67 Get support and other information from the Internet..67 Warranty support...67 HP customer support....68 Access your serial number and service ID.. 68 Call in North America....68 Call elsewhere in the world...69 Call in Australia under warranty and post-warranty...71 Call HP Korea customer support...71 Call HP Japan support...72 Prepare your HP All-in-One for shipment...Technical information...75 System requirements....75 Paper specifications...75 Print specifications...77 Copy specifications....77 Scan specifications....78 PictBridge specifications....78 Physical specifications...78 Power specifications...79 Environmental specifications...79 Additional specifications....79 Environmental product stewardship program..79 Regulatory notices...80 Declaration of conformity (European Economic Area)..Hewlett-Packard LIMITED WARRANTY STATEMENT..85 Duration of limited warranty....85 Extent of limited warranty...85 Limitation of warranty...86 Limitation of liability....86 Local law.... 86 Limited warranty information for EU countries/regions...86 Index.....89

HP All-in-One overview

Many HP All-in-One functions can be accessed directly, without turning on your computer. Tasks such as making a copy or printing photos from a camera can be accomplished quickly and easily from your HP All-in-One. This chapter describes the HP All-in-One hardware features, control panel functions, and how to access the HP Image Zone software. Tip You can do more with your HP All-in-One by using the HP Image Zone software installed on your computer. The software provides enhanced copy, scan, and photo functionality. For more information, see the onscreen HP Image Zone Help and Use the HP Image Zone to do more with your HP All-inOne.
The HP All-in-One at a glance

Label 7

Description Control panel On button PictBridge camera port Paper tray Paper tray extender Paper-width guide Print-carriage access / front clean-out door
Chapter 1 (continued) HP All-in-One overview

Label 12

Description Glass Lid Rear clean-out door Rear USB port Power connection

Control panel overview

Label Name and Description 1 Check Paper/Check Print Cartridge: Indicates the need to load paper, remove a paper jam, reinsert the print cartridge, replace the print cartridge, or close the printcarriage access door. Cancel / Resume button: Stop a job or exit settings. In certain situations (for example, after clearing a paper jam), this button resumes printing. Type button: Change the paper type setting to match the type of paper loaded in the paper tray (plain or photo paper). The default setting is plain paper. Quality button: Change the copy quality. The default quality for plain paper is Normal (two stars). The default quality for photo paper is Best (three stars).

(continued)

Label Name and Description 5 Size button: Change the image size to 100%, fit it to the page, or print borderless images. The default setting is 100% for plain paper and print borderless images for photo paper. Copies button: Specify the desired number of copies. Start Copy Black button: Start a black copy job. Start Copy Color button: Start a color copy job. Start Scan button: Start a scan job.

Status light overview

Several indicator lights inform you of the status of your HP All-in-One. The following table describes common situations and explains what the lights mean. For more information about status lights and resolving issues, see Troubleshooting information. Light All lights are off. The On button light, Start Copy Black backlight, and Start Copy Color backlight are on. The On button light is blinking, and the Start Copy Black backlight and Start Copy Color backlight are on. The On button light and the Start Copy Black backlight are blinking, and the Start Copy Color backlight is on. The On button light and the Start Copy Color backlight are blinking, and the Start Copy Black backlight is on. The Check Paper light is blinking, and the On button light, Start Copy Black backlight, and Start Copy Color backlight are on. The Check Print Cartridge light is blinking, and the On button light, Start Copy Black backlight, and Start Copy Color backlight are on. What it means The HP All-in-One is turned off. The HP All-in-One is on and ready.
The HP All-in-One is printing, scanning, or aligning the print cartridges. The HP All-in-One is making a black and white copy. The HP All-in-One is making a color copy.
The HP All-in-One is out of paper, has a paper jam, or has the wrong paper size loaded. The print-carriage access / front cleanout door is open, the print cartridges are missing or not installed properly, the protective tape is still on a print cartridge, or a print cartridge is defective.
Chapter 1 HP All-in-One overview
Use the HP Image Zone to do more with your HP All-inOne
The HP Image Zone software is installed on your computer when you set up your HP All-in-One. For further information, see the Setup Guide that came with your device. Access to the HP Image Zone software differs by operating system (OS). For example, if you have a computer running Windows, the HP Image Zone software entry point is the HP Director (or HP Solution Center). If you have a Mac and are running OS X v10.1.5 or later, the HP Image Zone software entry point is the HP Image Zone window. If you have a Mac and are running OS 9.2.6 or earlier, the HP Image Zone software entry point is the HP Director. Regardless, the entry point serves as the launching pad for the HP Image Zone software and services. You can quickly and easily expand the functionality of your HP All-in-One by using the HP Image Zone software. Look for boxes like this throughout the guide that provide topic-specific tips and helpful information for your projects.

Use printer sharing (Mac OS X)
If your computer is on a network, and another computer on the network is connected to the HP All-in-One by using a USB cable, you can use that device as your printer using printer sharing. Other computers on the network, which are referred to as clients, have access only to the print features. All other functions must be performed on the host computer. To enable printer sharing 1. On the host computer, select System Preferences in the Dock. The System Preferences window appears. 2. Select Sharing. 3. From the Services tab, click Printer Sharing.
Load originals and load paper
This chapter provides instructions for loading originals on the glass to copy or scan, choosing the best paper type for your job, loading paper in the paper tray, and avoiding paper jams.

Load an original

You can copy or scan up to letter- or A4-size originals by loading them on the glass, as described here. Note Many of the special features will not work correctly if the glass and lid backing are not clean. For more information, see Clean the HP All-in-One. To load an original on the glass 1. Lift the lid and place your original face down on the right front corner of the glass. Tip For more help on loading an original, refer to the guide engraved under the glass.
Close the lid. Tip You can copy or scan oversized originals by completely removing the lid from your HP All-in-One. To remove the lid, lift the lid part way and push out either at the left or right side to release the lid hook from its latch, then gently slide the remaining hook from its latch.

Chapter 4

Choose papers for printing and copying
You can use many types and sizes of paper in your HP All-in-One. Review the following recommendations to get the best printing and copying quality. Whenever you change paper types or sizes, remember to change those settings.

Recommended papers

If you want the best print quality, HP recommends using HP papers that are specifically designed for the type of project you are printing. If you are printing photos, for example, load glossy or matte photo paper in the paper tray. If you are printing a brochure or presentation, use a type of paper specifically designed for that purpose. Note Depending on your country/region, some of these papers might not be available. For more information about HP papers, see the onscreen HP Image Zone Help, or go to www.hp.com/support/inkjet_media. Note At this time, this portion of the site is available in English only.

Load other types of paper
The following table provides guidelines for loading certain types of paper. For best results, adjust the paper settings each time you change paper sizes or paper types. Note Not all paper sizes and paper types are available with all the functions on the HP All-in-One. Some paper sizes and paper types can only be used if you are starting a print job from the Print dialog box in a software application. They are not available for copying or printing photos from a digital camera. Papers that are only available for printing from a software application are indicated as such, below.

Paper HP papers

Tips HP Premium Paper: Locate the gray arrow on the nonprinting side of the paper, and then slide the paper into the paper tray with the arrow side facing up. HP Premium Inkjet Transparency Film: Insert the film so that the white transparency strip (with arrows and the HP logo) is on top and is going into the paper tray first. (For printing from a software application only.) Note The HP All-in-One cannot automatically detect transparency film. For best results, set the paper type in the software application to transparency film before printing onto transparency film. HP Iron-On Transfers: Flatten the transfer sheet completely before using it; do not load curled sheets. (To prevent curling, keep transfer sheets sealed in the original package until you are ready to use them.) Locate the blue stripe on the nonprinting side of the transfer paper and then manually feed one sheet at a time into the paper tray with the blue stripe facing up. (For printing from a software application only.) HP Matte Greeting Cards, HP Photo Greeting Cards, or HP Textured Greeting Cards: Insert a small stack of HP greeting card paper into the paper tray with the print side down; slide the stack of cards forward until it stops. (For printing from a software application only.)
Labels (for printing from a software application only)
Always use letter or A4 label sheets designed for use with HP inkjet devices, and make sure that the labels are no more than two years old. Labels on older sheets might peel off when the HP All-in-One, causing paper jams. 1. 2. Fan the stack of labels to make sure none of the pages are sticking together. Place a stack of label sheets on top of full-size plain paper in the paper tray, label side down. Do not insert labels one sheet at a time.

Avoid paper jams

To help avoid paper jams, follow these guidelines: Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag. Remove printed papers from the paper tray frequently. Ensure that paper loaded in the paper tray lays flat and the edges are not bent or torn. Do not combine different paper types and paper sizes in the paper tray; the entire stack of paper in the paper tray must be the same size and type. Adjust the paper-width guide in the paper tray to fit snugly against all paper. Make sure the paper guide does not bend the paper in the paper tray.

Stop scanning

To stop scanning, press the Cancel / Resume button on the control panel, or in the HP Image Zone software, click Cancel.

Use HP Instant Share

HP Instant Share makes it easy to share photos with family and friends. Using the HP Image Zone software installed on your computer, select one or more photos to share, select a destination for your photos, and then send the photos on their way. You can even upload your photos to an online photo album or an online photo finishing service. Availability of services varies by country/region. With HP Instant Share E-mail, family and friends always get photos they can view -no more large downloads or images that are too big to open. An e-mail message with thumbnail images of your photos is sent with a link to a secure Web page where family and friends can easily view, share, print, and save the photos.

Overview

If your HP All-in-One is USB-connected, you can share photos with friends and relatives using your device and the HP Image Zone software installed on your computer. A USB-connected device is an HP All-in-One that is connected to a computer by means of a USB cable and relies on the computer for access to the Internet.
Use HP Instant Share to send images from your HP All-in-One to a destination of your choice. The destination, for example, can be an e-mail address, an online photo album, or an online photo finishing service. Availability of services varies by country/ region. Note You can also send images to a friend or relative's network-connected HP All-in-One or photo printer. To send to a device, you must have an HP Passport user ID and password. The receiving device must be set up and registered with HP Instant Share. You will also need to obtain the name the recipient assigned to the receiving device. Further instructions are provided in Send images using your computer. Images can be photos or scanned documents. Either can be shared with friends and relatives using your HP All-in-One and HP Instant Share. Simply scan an image and send it to the destination of your choice. Note For more information on scanning an image, see Use the scan features.

Chapter 9

Get started
You must have the following to use HP Instant Share with your HP All-in-One: An HP All-in-One connected to a computer with a USB cable Internet access through the computer to which the HP All-in-One is connected HP Image Zone software installed on your computer. Mac users will find that the HP Instant Share client application software is also installed.
Once you have set up your HP All-in-One and installed the HP Image Zone software, you are ready to start sharing photos using HP Instant Share. For more information on setting up your HP All-in-One, see the Setup Guide that came with your device.
Send images using your computer
In addition to using your HP All-in-One to send images through HP Instant Share, you can use the HP Image Zone software installed on your computer to send images. The HP Image Zone software lets you select and edit one or more images, and then access HP Instant Share to select a service (for example, HP Instant Share E-mail) and send your images. At a minimum, you can share images through the following: HP Instant Share E-mail (send to an e-mail address) HP Instant Share E-mail (send to a device) Online Albums Online photo finishing (availability varies by country/region)

Clean the print cartridges
Before cleaning the print cartridges, print a self test page. For more information, see Print a self-test report. If the self-test report indicates a problem, clean the print cartridges using the HP Image Zone software. For more information, see the HP Image Zone Help. If you continue to have problems, clean the print cartridge contacts and the area around the nozzles. For more information, see the HP Image Zone Help.
Troubleshooting information
This chapter contains troubleshooting information for the HP All-in-One. Specific information is provided for installation and configuration issues, and some operational topics. For more troubleshooting information, see the onscreen HP Image Zone Help file that came with your software. Many issues are caused when the HP All-in-One is connected to the computer using a USB cable before the HP All-in-One software is installed on the computer. If you connected the HP All-in-One to your computer before the software installation screen prompts you to do so, you must follow these steps: 1. 2. 3. 4. 5. Disconnect the USB cable from the computer. Uninstall the software (if you have already installed it). Restart your computer. Turn off the HP All-in-One, wait one minute, then restart it. Reinstall the HP All-in-One software. Do not connect the USB cable to the computer until prompted by the software installation screen.
For information about uninstalling and reinstalling the software, see Uninstall and reinstall the software. This section contains the following topics: Setup troubleshooting: Contains information on hardware setup, software installation, and HP Instant Share setup troubleshooting information. Operational troubleshooting: Contains information on issues that might occur during normal tasks when using the HP All-in-One features. Device update: Based on advice from HP customer support or a message on the computer, you might access the HP support website to retrieve an upgrade for your device. This section contains information about updating your device.

The print cartridge or sensor is defective.
Solution Contact HP Support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
The HP All-in-One does not print Solution If your HP All-in-One and computer are not communicating with each other, try the following: Check the USB cable. If you are using an older cable, it might not be working properly. Try connecting it to another product to see if the USB cable works. If you experience problems, the USB cable might need to be replaced. Also verify that the cable does not exceed 3 meters (9.8 feet) in length. Make sure your computer is USB ready. Some operating systems, such as Windows 95 and Windows NT, do not support USB connections. Check the documentation that came with your operating system for more information. Check the connection from your HP All-in-One to your computer. Verify that the USB cable is securely plugged into the USB port on the back of your HP All-in-One. Make sure the other end of the USB cable is plugged into a USB port on your computer. After the cable is connected properly, turn your HP All-in-One off and then on again.
If you are using a Mac: Check the Apple System Profiler (OS 9) or the System Profiler (OS X) to verify your USB connection. If the HP All-in-One shows up in the USB window, then the USB connection between your computer and HP All-in-One is working. If it is working, there might be a problem with the software. Try to run the HP All-in-One Setup Assistant to see if it can detect the HP All-in-One. (You can access the HP All-in-One Setup Assistant through the HP Image Zone software.) Check other printers or scanners. You might need to disconnect older products from your computer. If your HP All-in-One is networked, see the Network Guide that came with your HP All-in-One. After you check the connections, try restarting your computer. Turn your HP All-in-One off and then on again.
For more information on setting up your HP All-in-One and connecting it to your computer, see the Setup Guide that came with your HP All-in-One.
I received a message on the computer about a paper jam or a blocked carriage Cause If either a paper jam or blocked carriage error message appears on the computer, there might be some packing material inside the HP All-in-One. Solution Lift open the print-carriage access door to expose the print cartridges and remove any packing material, tape, or other foreign objects. Turn off the HP All-in-One, wait one minute, and then press the On button to turn the HP Allin-One back on.

To uninstall from a Windows computer, method 3 Note This is an alternate method if Uninstall Software is not available in the Windows Start menu. 1. 2. 3. 4. Run the HP PSC 1500 All-in-One series software Setup program. Select Uninstall and follow the onscreen directions. Disconnect your HP All-in-One from your computer. Restart your computer. Note It is important that you disconnect your HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software. 5.
User Guide Troubleshooting information
Run the HP PSC 1500 All-in-One series software Setup program again.
Launch Reinstall. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with your HP All-in-One.
To uninstall from a Mac computer 1. Disconnect the HP All-in-One from your Mac. 2. Double-click the Applications: HP All-in-One Software folder. 3. Double-click HP Uninstaller. Follow the onscreen instructions. 4. After the software is uninstalled, disconnect your HP All-in-One, and then restart your computer. Note It is important that you disconnect your HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software. 5. 6. 7. To reinstall the software, insert the HP All-in-One CD-ROM into your computers CD-ROM drive. On the desktop, open the CD-ROM and then double-click HP all-in-one installer. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with your HP All-in-One.
Operational troubleshooting
The 1500 series Troubleshooting section in the HP Image Zone Help contains troubleshooting tips for some of the most common issues associated with your HP Allin-One. To access the troubleshooting information from a Windows computer, go to the HP Director (or HP Solution Center), click Help, and then choose Troubleshooting and Support. Troubleshooting is also available through the Help button that appears on some error messages. To access troubleshooting information from Mac OS X v10.1.5 and later, click the HP Image Zone icon in the Dock, select Help from the menu bar, choose HP Image Zone Help from the Help menu, and then choose 1500 series Troubleshooting in the Help Viewer. If you have Internet access, you can get help from the HP website at www.hp.com/ support.
If prompted, choose your country/region, follow the prompts to select your product, and then click one of the shopping links on the page. The website also provides answers to frequently asked questions.

Paper troubleshooting

To help avoid paper jams, only use paper types that are recommended for your HP Allin-One. For a list of recommended papers, see the onscreen HP Image Zone Help, or go to www.hp.com/support. Do not load curled or wrinkled paper, or paper with bent or torn edges, into the paper tray. For more information, see Avoid paper jams.

If available, pack the HP All-in-One for shipment by using the original packing materials or the packaging materials that came with your exchange device.
If you do not have the original packaging materials, please use other adequate packaging materials. Shipping damage caused by improper packaging and/or improper transportation is not covered under the warranty. 9. Place the return shipping label on the outside of the box. 10. Include the following items in the box: A complete description of symptoms for service personnel (samples of print quality problems are helpful). A copy of the sales slip or other proof of purchase to establish the warranty coverage period. Your name, address, and a phone number where you can be reached during the day.

Technical information

The technical specifications and international regulatory information for your HP All-in-One are provided in this section. This chapter provides information on system requirements for Windows and Mac; paper, print, copy, memory card, specifications for scan, physical, power, and environmental concerns; regulatory notices; and the declaration of conformity.

System requirements

Software system requirements are located in the Readme file. You can access the Readme file by double-clicking the icon located in the top-level folder of the HP All-in-One software CD-ROM. If Windows software is already installed, you can access the Readme file from the Start button on the taskbar; select Programs, Hewlett-Packard, HP PSC 1500 Series, View the Readme File.

Paper specifications

This section provides information on paper-tray capacities, paper sizes, and print margin specifications.

Paper-tray capacities

Type Plain paper Legal paper Cards Envelopes Transparency film Labels 4 by 6 inch (10 by 15 cm) Photo Paper 8.5 by 11 inch (216 by 279 mm) Photo Paper Paper weight 16 to 24 lb. (60 to 90 gsm) 20 to 24 lb. (75 to 90 gsm) 110 lb. index max (200 gsm) 20 to 24 lb. (75 to 90 gsm) N/A N/A 145 lb. (236 gsm) N/A Input tray* 100 (20 lb. paper) 100 (20 lb. paper 30 Output tray** 50 (20 lb. paper) 50 (20 lb. paper) 15 or fewer 10 15
* Maximum capacity. ** Output tray capacity is affected by the type of paper and the amount of ink you are using. HP recommends emptying the output tray frequently.

For more information, contact the Product Regulations Manager, Hewlett-Packard Company, San Diego, (858) 655-4100. The user may find the following booklet prepared by the Federal Communications Commission helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington DC, 20402. Stock No. 004-000-00345-4. Caution Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by the Hewlett-Packard Company may cause harmful interference and void the FCC authorization to operate this equipment.
Note lattention des utilisateurs Canadien/notice to users in Canada
Le prsent appareil numrique nmet pas de bruit radiolectrique dpassant les limites applicables aux appareils numriques de la classe B prescrites dans le Rglement sur le brouillage radiolectrique dict par le ministre des Communications du Canada. This digital apparatus does not exceed the Class B limits for radio noise emissions from the digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Notice to users in Australia
This equipment complies with Australian EMC requirements.

Geruschemission

LpA < 70 dB am Arbeitsplatz im Normalbetrieb nach DIN 45635 T. 19

Notice to users in Japan

Notice to users in Japan (VCCI-2)

Notice to users in Korea

Declaration of conformity (European Economic Area)
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
__________________________________________________________________________
Manufacturer's Name: Manufacturer's Address:

Hewlett-Packard Company

16399 West Bernardo Drive San Diego CA 92127, USA

Regulatory Model Number:

SDGOB-0502
Declares, that the product: Product Name: HP PSC 1500 All-in-One series
Conforms to the following Product Specifications:
Safety: IEC 60950-1: 2001 EN 60950-1: 2002 UL 60950: 1999 CAN/CSA-22.2 No. 60950-1-03 GB4943: 2001 CISPR 22:1997 / EN 55022:1998 Class B l CISPR 24:1997 / EN 55024:1998 +A1:998 IEC 61000-3-2: 2000 / EN 61000-3-2: IEC 61000-3-3/A1: 2001 / EN 61000-3-3/ A1: 2001 FCC Part 15-Class B/ICES-003, Issue 2 GB9254: 1998
Supplementary Information: The product herewith complies with the requirements of the Low Voltage Directive 73/23/EC, the EMC Directive 89/336/EC and carries the CE-marking accordingly. 1) The product was tested in a typical configuration. 2) Please refer to the declaration of similarity (DoS) for all tested power supplies.

06 Jan 2005 Date

San Diego Regulatory Manager
European Contact for regulatory topics only: Hewlett Packard GmbH, HQ-TRE, Herrenberger Strasse 140, D-71034 Bblingen Germany. (FAX +49-7031-14-3143
Hewlett-Packard LIMITED WARRANTY STATEMENT
HP product Software Printer Print cartridges Duration of limited warranty 90 Days 1 Year Until the HP ink is depleted or the end of warranty date printed on the cartridge has been reached, whichever occurs first. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with. 90 days

Hungary Hewlett-Packard Magyarorszg Kft. 1117 Budapest Neumann J. u. 1. Slovensk republika Hewlwtt-Packard Slovakia, s.r.o. Miletiova 00 Bratislava
Lietuva UAB Hewlett-Packard eimyniki g. 21B 09200 Vilnius eska republika HEWLETT-PACKARD s.r.o. Vyskoilova 1/21 Praha 4
Chapter 15 (continued) fax +Slovenia Hewlett-Packard d.o.o. Tivolska cesta Ljubliana Cyprus/Kibris Hewlett-Packard Hellas E.E. Voriou Epirou 25 Maroussi Athens, Greece Malta Hewlett-Packard Europe B.V. Amsterdam, Meyrin Branch 150, Route de Nant d'Avril 1217 Meyrin, Geneva Switzerland
Symbols/Numerics 10 x 15 cm photo paper load x 6 inch photo paper load 16 A A4 paper load 15 align print cartridges 48 B best copy quality 24 borderless copies 10 x 15 cm (4 x 6 inch) photo 25 C camera port. See PictBridge port cancel copy 26 print job 29 scan 32 cancel button 4 cartridges. See print cartridges clean exterior 42 glass 41 lid backing 41 print cartridges 49 connection types supported printer sharing 11, 12 USB 11 control panel overview 4 copy black-and-white documents 25 cancel 26 copy specifications 77 number of copies 24 paper types, recommended 23 quality 24 speed 24 customer support Australia 71 contact 68 HP Quick Exchange Service (Japan) 72 Japan 72 Korea 71 North America 68 outside U.S. 69 serial number 68 service ID 68 website 67 D declaration of conformity European Economic Area 83 device update Mac 65 overview 64 Windows 64 digital camera PictBridge 21 E envelopes load 18 Environmental product stewardship program 79 environmental specifications 79 F fast copy quality 24 FCC statement 81 fit to page 26 G glass clean 41 load original greeting cards load 18 H Hagaki cards load 17 HP All-in-One overview 3 prepare to ship 72 HP Director HP Instant Share 36 Mac 6 missing icons 59 start (Windows) 6 HP Image Zone HP Instant Share 34, 35, 36 Mac 6, 35, 36 overview 6 Windows 6, 34 HP Instant Share about 33 e-mail photos from the HP Image Zone (USB) 34 HP Image Zone 34 send images from HP Image Zone (USB) 34 send to a device 34 setup (USB) 34 HP JetDirect 11 HP Support before you call 51 I ink cartridges. See print cartridges ink levels, check 42 inkjet supplies recycling 80 Instant Share. See HP Instant Share iron-on transfers load 18 J jams, paper 19, 63 L labels load 18 legal paper load 15

letter paper load 15 lid backing, clean 41 load 10 x 15 cm photo paper x 6 inch photo paper 16 A4 paper 15 envelopes 18 full-size paper 15 greeting cards 18 Hagaki cards 17 iron-on transfers 18 labels 18 legal paper 15 letter paper 15 original 13 postcards 17 transparencies 18 M maintenance align print cartridges 48 check ink levels 42 clean exterior 42 clean glass 41 clean lid backing 41 clean print cartridges 49 replace print cartridges 44 self-test report 42 media. See paper N normal copy quality 24 number of copies copy 24 O order paper 39 print cartridges 39 Setup Guide 40 software 40 User Guide 40 P paper incompatible types 14 jams 19, 63 load 15 order 39 paper sizes 76
recommended copy types 23 recommended types 14 paper specifications 75 paper-tray capacities 75 phone numbers, customer support 68 photo paper load 16 photos HP Image Zone 34 photo print cartridge 47 physical specifications 78 PictBridge 21 PictBridge port 21 postcards load 17 power specifications 79 print cancel job 29 from computer 27 from software application 27 print options 28 print specifications 77 self-test report 42 print cartridge protector 48 print cartridges align 48 check ink levels 42 clean 49 handle 43 order 39 part names 43 photo print cartridge 47 replace 44 store 48 troubleshoot 63 print margin specifications 76 printer sharing Mac 12 Windows 11 Q quality copy 24 R recycling 80 reduce/enlarge copies resize to fit letter or Aregulatory notices
declaration of conformity (European Economic Area) 83 FCC statement 81 note lattention des utilisateurs Canadien 81 notice to users in Canada 81 notice to users in Japan 82 notice to users in Korea 82 regulatory model identification number 81 replace print cartridges 44 reports self-test 42 return your HP all-in-one 72 S scan from control panel 31 scan specifications 78 stop 32 scan button 5 scan glass clean 41 load original 13 self-test report 42 send to a device HP Image Zone (Mac) 35 HP Image Zone (Windows) 34 serial number 68 service 67 see also customer support service ID 68 settings print options 28 software application, print from 27 software update. See device update specifications. See technical information speed copy 24 start black 5 start color 5 status lights overview 5 stop copy 26 print job 29 scan 32

Product environmental attributes - IT ECO Declaration 2003
Brand Manufacturer Manufacturers representative Contact person Postal address Postal code /City/ Country Telephone (incl. country code) Mobile phone (incl. country code) Fax (incl. country code) Internet site Additional information
Hewlett-Packard Hewlett-Packard Name: email: itecodeclaration.ww@hp.com Name: Hans Wendschlag, HP Sweden email:
http://www.hp.se/environment
Latest version of this document can be found at: www.hp.se/itecodeclarations. The company environmental profile, which is issued for the company and isn't product related, can also be found at the same website. Check Item 14 for explanatory information regarding specific item responses.
This declaration covers the below listed Information Technology product categories* with specified product identity (ID) such as type/model number.
Computer System Unit (CPU) Display/Monitor Printer Black/white Product Identity Copier Fax Color Mobile/Portable Computer Keyboard Multifunction product Pages per minute: Scanner Server

Digital

Projector

Camera

Other product, specify:

black/18

HP PSC 1500 All-in-One Series,Product (Q5888A, Q5889A) RMN SDGOB-0502 Models PSC1510(Q5880A,B, Q5886C), PSC 1513(Q5880C), PSC 1508(5880D), PSC 1510x i(Q5881A), PSC 1510V(5882A), PSC 1507(Q5883A,B) PSC 1503(Q5883C), PSC 1504(Q5884B), PSC 1514(Q5885B)
Version of Guideline document used for completion of this declaration (yyyy-mm-dd):

Guideline document

2003-09-01 *For Telecommunication products, use special ECO declarations found at:
This IT ECO Declaration consists of three documents: Company Environmental Profile Divided in to two sections; Legal and Market requirements Product Environmental Attributes Divided in to two sections; Legal and Market requirements and Guideline document with extensive clarifications, comments and references.

www.itecodeclaration.org

The latest version of all these documents can be downloaded from: Notes:
Voluntary vs compulsory requirements: Items marked V are voluntary to answer, all other items must be answered.
The latest version of the Guideline document must be used. Specify in table above according to which version of the guideline document this declaration has been

completed.

This version of the IT ECO Declaration is adjusted to the document Product-related Environmental Attributes, issued by the European Association for Standardizing
Information and Communication Systems (ECMA), TR/70, version 1999.
This version of the IT ECO Declaration meets the basic principles of ISO14021:1999, Environmental labels and declarations Self-declared environmental claims (Type
II environmental labelling).
This IT Eco Declaration version can be used from October 1
and shall be used for products announced after December 1
The IT Eco Declaration is a system for declaration of environmental aspects of IT and Telecom products, developed by the Nordic IT organisations, ITB in Denmark, IKT-Norge in Norway and IT-Fretagen in Sweden. This IT Eco Declaration may only be used after having signed a contract with at least one of these organisations.
Association of the Swedish IT and Telecom Industry www.itforetagen.se
Norwegian IT-companies Organisation www.ikt-norge.no
IT-Brancheforeningen Kontor & Data www.itb.dk
Template version September 2003

2005-06-01

Product identity:
HP PSC 1500 All-in-One Series
Models PSC1510(Q5880A,B, Q5886 Page 1 (4)
Copyright Association of the Swedish IT and Telecom Industry 2000. Reproduction of this form without permission is prohibited by the copyright law 1960:729. The prohibition includes any kind of reproduction, by electronic or any other means.
Product environmental attributes Item P1 P1.1 P1.2 P1.3 P1.4 P1.5 P1.6 P2 P2.1 P2.2 P3 P3.1 P3.2 P3.3 P3.4 P4 P4.1 P4.2 P4.3 P5 P5.1 P5.2

Legal requirements Requirement met Yes No n.a.
Environmental conscious design The product is free from, i.e. less than 0.1% by weight (b.w.), CFCs& HCFCs, asbestos and PCB & PCT (3093/94/EEC, 76/769/EEC, 6th amendment, 99/77/EEC, 82/828/EEC) Components are free from, i.e. less than 0.1% b.w., mercury (Hg), except for small amounts of mercury which are allowed in light sources. (SE SFS 1998:944) Cadmium (Cd) content of colorants, stabilizers, and surface treatments does not exceed, 0.01% b.w., as specified in 76/769/EEC, 10th amendment, 1991/338/EEC. Paints are free from lead (Pb), i.e. less than 0.1% b.w., (76/769/EEC, 8th amendment, 89/677/EEC) Paints, coatings, plastics, rubbers and seals are free from flame retardants and / or plasticizers containing Short Chain Chlorinated Paraffines (SCCPs) with more than 0,1% by weight, 10-13 carbon atoms, minimum 48% chlorine by weight, CAS number 63449-39-8 (NO MVD regulation 1544, 2000.12.13 If the product is intended for direct and prolonged skin contact, the surfaces do not release nickel (Ni) above levels specified in (76/769/EEC, 8th amendment, 94/27/EEC) Batteries If hazardous batteries are used in the product, they are labelled. (93/86/EEC). If batteries are used in the product they are free (<0.0005% by weight) from mercury (Hg) (98/101/EC) Electrical safety, EMC and connection to the telephone network The product meets the Low Voltage Directive (LVD) regarding electrical safety (73/23/EEC & 93/68/EEC) The product meets the EMC Directive regarding electromagnetic compatibility (89/336/EEC) If product is intended for connection to a public telecom network or contains a radio transmitter, it meets the EU R&TTE Directive (1999/5/EC) The product is CE-marked (93/68/EEC) Consumable materials If a photo conductor (drum, belt etc.) is used in the product, it is free (<0.01% by mass) from cadmium (Cd) (76/769/EEC and 91/338/EEC) If an ink is used in the product, it is free (<0.01% by mass) from cadmium (Cd) (91/338/EEC) If toner/ink (or corresponding) are used in the product, they are classified and if required labelled in accordance with EU directives 99/45/EEC and 2001/58/EEC Packaging materials The sum of the concentration levels of lead, cadmium, mercury, and hexavalent chromium present in packaging or packaging components does not exceed 0.01% by weight (100 ppm). (94/62/EC). The product packaging material is free from CFC/HCFC.
This product meets above listed legal requirements
Product identity: HP PSC 1500 All-in-One Series
Page 2 (4) SDGOB-0502 Models PSC15
Product environmental attributes - Market requirements Item P6 Requirement met V = Voluntary to answer. Yes No n.a. Environmental conscious design Disassembly, recycling Glueing / welding of different material has been avoided Plastic materials in covers / housing have not been surface coated. Mechanical plast ic parts >100g, consist of one material or of easily separable materials. Plastic parts >25g, have material codes according to ISO 11469, which inc ludes ISO 1043, part 1-4

P6.1 P6.2 P6.3 P6.4 P6.5 P6.6

Part 1

Part 2

Part 3

Part 4
Plastic parts are free from metal inlays that cannot be removed by one man alone with commonly available tools. If labels are required they should be separable. (This requirement does not apply to safety labels.) Product lifetime Upgrading of the product can be done with commonly avai lable tools Processor, memory and cards of various types can be changed/upgraded. Hard disk, CD/DVD drives and / or f loppy drive can be changed/upgraded. Spare parts are available after end of production for Material requirements years

P6.7 P6.8 P6.9 P6.10

P6.11 P6.12
Plastic parts >25g are free from PBB/PBDE, i.e less than 0.1% b.w. Plastic parts >25g are free from f lame retardant substances/preparations above 0.1% classified as R45/46, R50/ 51/52/53 and R60/61 (67/548/EEC) Chemical specif ication of f lame retardants in plast ic parts over 25g according to ISO 1043-4:
Product cover/ housing: Not Flame Retarded
Other plastic parts: Not Flame Retarded
Printed c ircuit boards: Not Fl ame Retarded
Product cover/housing material type, specif ied according to ISO 1043-1 P6.14
Material type Material type Material type

HIPS ABS

P6.15 P6.16
Electrical cable insulation material specif ication Light sources are free from mercury, i.e less than 0.1% b.w. If mercury is used specify: Number of lamps

Info V

& Max. Mercury per lamp (mg)
P6.17 P6.18 P7 P7.1 P7.2 P8 P8.1
Mechanical plast ic parts > 25g are free from lead (Pb), i.e. less than , 0.1% b.w. Product is free from beryllium (Be) and beryllium oxide (BeO), i.e. less than 0.1% b.w. Batteries Product is free from batteries def ined as hazardous (91/157/EEC) Batteries are used that meet the EU Eco-label criteria (2001/687/EC & 2001/686/EC) Energy Consumption Maximum power: Low Power mode: 9.3 W W W Operation: Off mode: Deep sleep mode: min.; min.; Sleep mode in: Off mode in: N/A 6.9 W W W min.; min. V Value V V
8.6 Sleep mode: If Product is in Stand by mode, it reverts to: Low power mode in Deep sleep mode in: P8.2

Automatic 2-sided printing/ copying from 1-sided originals. Information about the energy save function is given in the user documentation. (Not applicable when no instruction is needed to operate the energy save function, i.e. the energy save function cannot be adjusted or inhibited by the user.) The product meets the requirements of ENERGY STAR. The product meets the requirements of GEEA. Display meets the energy save requirements of EU Eco-label (2001/ 686/EC & 2001/687/EC). Desktop or portable computer meets the energy save requirements of EU Eco-label (2001/686/EC & 2001/687/EC) V V V

P8.3 P8.4 P8.5 P8.6

2 Models PSC1510(Q5880A,B, Q58 Page 3 (4)

Item P9 P9.1 P9.2

Requirement met V = Voluntary to answer. Yes No n.a. Noise characteristics (Measured and declared according to ISO 7779 and ISO 9296) Declared A-Weighted Sound Power Level, LW Ad (1B = 10 dB) 6.7 bels Operating Mode: LWAd : Idling Mode: B The product meets the acoustic noise requirement of: The product meets the acoustic noise requirement of: The product meets the acoustic noise requirement of: TCO Blue Angel EU Flower Value V V V V

L WAd :

3.3 bels
The product meets the acoustic noise requirement of: Nordic Swan Declared A-Weighted Sound Pressure Level, LpAm (measured at the Operator Position if applicable; otherwise measured at the 1m Bystander Positions). For PC tower, check the test to determine LpAm : table top floor standing Check the test used to detemine LpAm : operator position bystander position Operating Mode: LpAm: dB Idling Mode: L pAm : dB Emissions Chemical emissions Dust: < 0.006 mg/m , tested according to:

RAL-UZ

Specify: V V V
Meets the dust emission requirements of: Meets the dust emission requirements of: Meets the dust emission requirements of: P10.2 Ozone: < 0.001 mg/m , tested according to:
TCO Blue Angel Nordic Swan

RAL-UZ Other

Meets the ozone emission requirements of: Meets the ozone emission requirements of: Meets the ozone emission requirements of: P10.3 Styrene: < 0.001 mg/m , tested according to:
Meets the styrene emission requirements of: Meets the styrene emission requirements of:

TCO Blue Angel

P11 P11.1 P11.2 P11.3 P11.4 P12 P12.1 P12.2 P12.3 P13
Meets the styrene emission requirements of: Nordic Swan Electromagnetic emissions Display/monitor/portable computer meets the requirement for low frequency electromagnetic fields in: MPR-II Display/monitor/portable computer meets the requirement for low frequency electromagnetic fields in: TCO Display/monitor/portable computer meets the requirement for low frequency electromagnetic fields in: -A, prEN50279 Consumable Materials The photo conductor is free from selenium. If the photo conductor contains selenium there is a system for waste recovery. Safety data sheet/Material Safety Data Sheet (SDS / MSDS) is available for toner/ ink (99/45/EC & 2001/58/EC) Paper containing recycled fibres and meeting the requirements of ENV 12281:1996, can be used in the product. Ergonomics The computer system meets the ergonomic requirements of EN 29241-3, -7, -8 for CRT displays and EN-ISO 13406-2 for flat panel displays. The product keyboard meets the requirements of ISO 9995 and EN 29241-4. The computer input device meets the requirements of ISO 9241 part 9. Packaging Product Packaging: Material Type: Material Type: Material Type: Material Type: Corrugated Paper Polystyrene Polyethylene Composite Plastic weight: weight: weight: weight:

0.59kg 0.02 kg 0.02 kg 0.01 kg

kg kg kg kg V V V Value

Product Packaging: Product Packaging: Product Packaging:

P13.2 P13.3 P13.4 P14

Plastic packaging material is marked according to DIN 6120, ISO 11469 or ISO 1043,1-4. Product plastic packaging is free from chlorine User and product documentation are free from chlorine bleached paper Additional Information
"The IT Eco Declaration covers the product base model only. If optional items with moving parts are added, like extra hard disks or graphic cards with fans etc, these can change energy and acoustics values for which HP can take no responsibility." 0 anto

Product identity: HP

PSC 1500 All-in-One Series
els Page 4 (4) PSC1510(Q5880A,B, Q5886