QuickSpecs

Overview
HP StorageWorks 4/256 SAN Director and 4/256 Power Pack B-Series Family
The HP StorageWorks 4/256 SAN Director is an advanced B-series director-class switch, which provides high reliability, performance and scalability for Storage Area Networks (SANs) in mission critical enterprise environments. The 4/256 SAN Director provides a 4Gb/s backplane with industry-leading 10Gb, 8Gb, and 4Gb/s Fibre Channel port speeds. It delivers leading performance and scalability with up to 384 ports in a single domain. The high-performance architecture provides auto-speed negotiation to support legacy 1, 2, and 4 Gb/s server and storage devices for maximum flexibility. An 8Gb Fibre Channel blade also provides the ability to aggregate up to eight 8 Gb/s ports to create an Inter-Switch Link (ISL) trunk (optional software) for up to an unprecedented 64 Gb/s of bandwidth. For organizations with dark fiber, a 10Gb blade enables them to fully utilize 10Gbit/sec links via dark fiber. In most cases today, a leased 10Gbit/sec link is underutilized because organizations can transmit only 4 Gbit/sec Fibre Channel traffic over a 10 Gbit/sec connection. With Extended Fabric software (optional) distance support for extended applications has been increased to support distances up to 500 kilometers depending on speed. The director also extends the distance for data transferred through ISL Trunking which enables new levels of performance between data centers. The 4/256 SAN Director is designed for continuous operation and supports "five-nines" (I.e., 99.999%) availability. The director is engineered with built-in redundancy; FRUs capable of hot-swap install/de-install, and non-disruptive hardware and software upgrades concurrent with operation. The unique industry-leading capabilities position the Director Switch and the B-series product family to be the standard solution for Corporate and Enterprise SANs. Administrators concerned with the threats of unauthorized SAN access and unauthorized SAN configuration changes can use security capabilities built into the ASIC and software. Plus, they can use the optional Power Pack set of tools to monitor the network's health and performance. Available pre-configured on the switch or as an upgrade, Power Pack also provides the foundation for integration into HP storage management tools, enabling infrastructure management through a singlepane-of-glass. The Power Pack tools can be ordered separately, as well.

DA - 12344

Worldwide Version 19 September 27, 2010

Page 1

What's New
Supports the HP Factory Express racking capability through the use of a factory integration option. Key Features and Benefits Outstanding scalability and performance Delivers up to Gb/s ports or Gb/s ports in a single domain and a 14U enclosure Greater trunking bandwidth and distance support Optimized fabric performance and load balancing by automatically routing of data to most efficient path State of the art reliability Meets ultra-high availability requirements with redundant, hot-pluggable components, no single point of failure, and non-disruptive software upgrades Reduced total Cost of Ownership (TCO) for SAN Infrastructure Enables storage consolidation, simplified management of data center SAN environment Low Cost Server connectivity via iSCSI minimizes cost of connecting second tier assets Broadest range of compatibility with SAN products Multi-vendor server and storage environment Widest range of HP SAN solutions Backward compatible with previously installed 1Gb, 2Gb, and 4Gb SAN Switches Interoperability with the more than 3.0 MILLION port HP SAN Switch installed base DA - 12344 Worldwide Version 19 September 27, 2010 Page 2

Interop mode support with M-series M-EOS and B-Series FOS based SAN fabrics Flexible SAN Services 4Gb Fibre Channel routing services FCIP Services for SAN Extension featuring: Hardware assisted traffic forwarding for greater performance Hardware-based Encryption for greater security (optional) HP Power Pack (Optional) - highest supported modular functionality Trunking - highest throughput between switches (32Gb/sec) Proactive threshold monitor (Fabric Watch) Advanced Performance Monitor Support for extended distance (Extended Fabrics) Broadest Range of HP Packaged SAN Services Mission critical SAN Services SAN-ES Assessment and installation services for security

Page 3

Product Highlights
4/256 SAN Director and 4/256 Power Pack
384-port single-domain 4 Gb/s director that enables high-port-count SANs with fewer domains Flexibility to build a high-port-count or highest-performing director with 4Gb 48, 32 and16-port blades and 8Gb 16 port blades Full performance at 4 Gb/s across 128 ports using 16-port 4 Gb/s blades, providing excellent performance Full performance at 2 Gb/s across 256 ports using 32-port 4 Gb/s blades, providing leading performance and port density 3 to 1 maximum oversubscription ratio with 48-port 4 Gb/s blades for outstanding fan-out scalability Local switching capability on every port for each port blade providing full 4 Gb or 8Gb bandwidth Enhanced control processors with approximately twice the processing power and an optimized memory bus for more powerful fabric services processing Automatic port speed negotiation at 1, 2, 4, and 8 Gb/s to help ensure seamless integration and interoperability with existing networked storage environments "Five-nines" availability and reliability Built-in redundancy with no single point of failure for AC power input, power supplies, and cooling blowers, as well as control processors with stateful failover Concurrent hardware and software upgradeability with hot code loading and activation Hot-swappable Field-Replaceable Units (FRUs) Employs (optional) Inter-Switch Link (ISL) Trunking to provide high-speed data path between switches Integrates fully with HP OpenView storage management products Ships with two power supplies and control processors Ships with zero ports; flexibility to configure the Director with either 16-port, 32-port or 48-port, Multi-Protocol blade and/or iSCSI 4Gb/s blades Outstanding flexibility with 4Gb routing services, FCIP SAN extension services , and iSCSI support Designed for E_Port interoperability with B-Series or M-Series fabrics Scales up to 384 ports in a single switch domain, participating in large core-to-edge fabrics. Please see the following web site for SAN configuration support information: http://www.hp.com/go/SANDesignGuide Redundant, hot-swappable components Redundant power and cooling subsystems Enhanced data integrity on all data paths Fabric Shortest Path First (FSPF) rerouting around failed links Integration with SNMP managers Automatic Control Processor fail over Non-disruptive "hot" software code loads and activation Easy configuration, save and restore Remote Monitoring of entire data center via Instant Support Enterprise Edition (ISEE)

SAN scalability

High-availability features

Page 4

Advanced Fabric Services
ISL Trunking (optional) Hardware Enforced Zoning Frame Filtering Web Tools Enhanced Group Management (EGM) End-to-End Performance Analysis (optional) Extended Fabrics (optional) Fabric Watch (optional) Data Center Fabric Manager (optional) 22U, 36U, and 42U; 5000, 9,000 and 10,000 series StorageWorks Cabinets are supported 25U, 33U, and 41U HP system/e cabs NOTE: A maximum of two Director switches currently are supported to ship configured to order from the factory in a StorageWorks 42U, 10000 (10KG2) cabinet. The Standard internal PDUs provided with StorageWorks cabinets CANNOT be used for the SAN Director when configured in a StorageWorks 42U, 10000 series cabinet. Two 30 AMP, 200-240V, L6-30p PDUs are required per cabinet. The part number for the required 30 AMP PDU is E7681A (E7681-63001).

Cabinet Support

Software Components, Standard
Remote Switch The Remote Switch fabric functions with the aid of a bridging device, or network bridge. The network bridge supports Fibre Channel physical interfaces, as well as secondary non-Fibre Channel FCIP physical interfaces. An ASIC based capability in the 4 Gb family of SAN switches that enables new applications and features. The switch has the ability to "view" the first 64-bytes of the Fibre Channel frame. At this time, Frame Filtering enables advanced capabilities such as Advanced Zoning and Advanced Performance Monitoring (optional). In the 2Gb generation of switches, WWN Zoning and Access Control are enforced by hardware that provides the same simple administration previously enforced only with software. Administrators can organize a physical fabric into logical groups and prevent unauthorized access by devices outside the Zone. WebTools is an intuitive and easy-to-use graphical interface that enables organizations to monitor and manage HP SAN switch fabrics. SAN administrators can perform management tasks by using a Javacapable Web browser from standard laptops, desktop PCs, or workstations from any location within the enterprise.

Frame Filtering

Advanced Zoning

WebTools

Page 5
Enhanced Group Management (EGM) is a FOS license that is included with all B-Series switches and enables multi-switch operations. It helps automate operations across multiple switches to save time and streamline repetitive operations, which are typically prone to error. EGM drives consistency across fabrics, while minimizing the risk associated with potential downtime due to configuration mismatches. EGM provides streamlined troubleshooting for more effective fabric monitoring and diagnosis. Both Data Center Fabric Manager Professional and Enterprise enable EGM functionality. Customers have EGM functionality enabled within the hardware product and need only to make the decision around which management application is right for them - Data Center Fabric Manager Professional or Enterprise.
Software Components, Optional
SAN Director Power Pack The SAN Director Power Pack Software bundle includes: Software Bundle Extended Fabric ISL Trunking Advanced Performance Monitoring Fabric Watch Extended Fabric Extends all of the scalability, reliability, and performance benefits of Fibre Channel Storage Area Networks (SANs) beyond the native 10 km distance specified by the Fibre Channel standard. HP StorageWorks Data Center Fabric Manager Professional is a server based management application available at no-charge and comes with B-series SAN Switches and includes the following features: Allows management of a single Fabric OS (FOS) fabric (up to a 1,000 B-Series switch ports) at a time Performs group switch management beyond the scope of Web Tools Does not offer management of the DC SAN Backbone Director It is targeted for SMB customers that use FOS based SAN fabrics and require a management solution for smaller SANs based on a single fabric. SMB customers that initially start off with Data Center Fabric Manager Professional and have a small SAN environment may over time feel the need for an enterprise-class product (Data Center Fabric Manager Enterprise) as their environments start to grow in size and complexity, and as they start to uptake more enterprise-class functionality (such as Fibre Channel Routing, FCIP, etc.). A non-disruptive upgrade path is available from Data Center Fabric Manager Professional to Data Center Fabric Manager Enterprise.
Data Center Fabric Manager Professional

Page 6

Data Center Fabric Manager Enterprise
HP StorageWorks Data Center Fabric Manager Enterprise is the enterprise-class product that supports FOS products as well as FOS and M-EOS products together. It provides complete DC SAN Backbone Director management including enterprise-class features/environments such as FICON, Fibre Channel Routing, FCIP, adaptive networking, etc. It delivers unprecedented scalability (up to 24 fabrics and 9,000 switch ports) compared to the existing products. It offers brand-new features including Adaptive Networking features for quality of service, ingress rate limiting and traffic isolation zones. Data Center Fabric Manager Enterprise requires at least one FOS based B-series SAN switch in the SAN. While DCFM provides increased functionality, not all features available in FM or HAFM are available in DCFM, and some functions may operate differently. Please refer to the Migration and Transition guide for additional information.

ISL Trunking

For high performance enhanced Trunking, this optional license logically groups up to eight E-ports to provide a high bandwidth trunk between two switches. Each 4 Gb switch needs its own license. The switch operating system views the trunk as a single, high bandwidth resource (up to 32 Gb) when routing connections between switches. Connections are load-balanced across the individual links, which comprise the logical trunk group. This enabling technology helps administrators monitor and watch specific fabric metrics -- from a SID (Source ID) to a DID (Destination ID) -- so they can fine-tune and scale the fabric more efficiently. Plus, Advanced Performance Monitoring includes the ability for early warning detection of hot spots within the fabric, a powerful tool for maintaining overall balanced performance. Fabric Watch enables each switch to monitor the SAN for potential faults and automatically alert network managers to problems before they become failures. Fabric Watch tracks a variety of SAN fabric elements, events, and counters. Monitoring fabric-wide events, ports, SFPs, and environmental parameters permits early fault detection and isolation as well as performance measurement. Each switch in the SAN needs its own Fabric Watch license.
Advanced Performance Monitor

Fabric Watch

HP StorageWorks 4/256 Ficon Director Switching provides Fibre Channel and FICON intermix, FICON Control Unit Port (CUP), SAN Director FICON CUP and FICON cascading for more then one 4/256 SAN Director in XP Storage Array environments. The license feature provides Control Unit Port (CUP) in-and management function designed to allow Active License mainframe applications to perform configuration, monitoring, management and statistics collection. These applications include System Automation for OS/390 (SA/390), Dynamic Channel Management Facility (DCM) and Resource Management Facility (RMF). Hardware- enforced FICON and FCP port zoning enhances separation with intermix operation.

Page 7

HP StorageWorks MP Blade Performance Extension LTU
Optional software license to activate the high performance extension services. The HP MPR Blade provides two types of SAN Services: Optional software license to activate the FCIP SAN services. The HP MPR Blade provides two types of SAN Services: FC-FC Subnet Routing Service for SAN island consolidation: Logically connect devices in multiple SAN fabrics to share storage resources-from any fabric regardless of distance-with the administration and fault isolation benefits of separately managed fabrics FCIP Tunneling Service for SAN extension over distance: Seamlessly and reliably extend HP B-Series SANs across MAN and WAN IP networks with high performance FCIP services, fully integrated with HP CA solutions for EVA and XP. Configurable hardware-based encryption is also available in for the FCIP service with FOS v5.2 or later.

Page 8

Warranty
Service and Support, HP Care Pack, and Warranty Information
2-2-2) Hardware Warranty - Hardware Warranty - Two-year on-site warranty, 24x7, 4-hour remote response, installation not included. NOTE: The hardware warranty covers firmware and embedded non-saleable software. Saleable software carries its own warranty, see below. Software Warranty - HP warrants only that the software media will be free of physical defects for a period of ninety (90) days from delivery. EXCLUSIVE REMEDY: The entire liability of HP and its suppliers and your exclusive remedy for software that does not conform to this Limited Warranty shall be the repair or replacement of the defective media. This warranty and remedy are subject to your returning the defective media during the warranty period to HP in the country in which you obtained the software.
HP Care Pack Services. Scalable, Flexible, Dependable. Like your storage. Your storage is evolving. Get scalable support that evolves with it. HP Care Pack Services is an easy-to-buy, easy-to-use portfolio of packaged services covering your lifecycle needs. You can rely on our highly skilled, HP certified professionals to offer a breadth of expertise across leading storage technologies, and work side by side with you for optimal results. Push services beyond expectations and choose support that meets the changing needs of your business with the same reliability, scalability and flexibility you demand of your storage. Protect your business beyond the warranty Standard warranty protects against product defects and some causes of downtime. HP Care Pack Services helps you proactively guard against unplanned downtime which can reduce your productivity and profitability. By using a standard approach to warranty uplifts, such as HP Care Pack Services, customers can be more sure of consistency of operations for both mission-critical and standard business computing. Extending warranties with HP Care Pack Services The key to normalizing the warranty of combined solutions-is making service uplift simple: HP Care Pack Services. This portfolio of predefined packages, extending across the entire IT lifecycle, offering consulting, education, technical support, optimization, risk assessment, and more. It's entirely flexible allowing customers to extend the cover to the precise level of support required. Customer's standard hardware warranty, for example, can be upgraded to next-business-day response, to same-day coverage, or even to a committed six-hour call-to-repair service available 24 hours every day of the week. Provide consistent, predictable levels of support across your entire department or business Give you direct access to proven technical and problem-solving expertise Offer a choice of response-time and repair-time commitments Are available whenever and wherever you do business For many products, post-warranty HP Care Pack Services are available when your original warranty has expired. Choose the support levels that meet your business requirements, from basic to mission-critical. http://www.hp.com/hps/storage NOTE: Care Pack Services availability may vary by product and country. Recommended Services HP Care Pack Services recommended for optimal satisfaction of all deployments of your product. 3-Year HP Support Plus 24x7x365 hardware and software services - plus cost-saving software updates and more 24 HP Support Plus 24 helps you increase performance and availability with comprehensive, consistent hardware and software services. Working with your IT team, HP Services engineers deliver onsite hardware support and DA - 12344 Worldwide Version 19 September 27, 2010 Page 9

over-the-phone software support around-the-clock 365 days per year. Service coverage encompasses HP products and selected multivendor hardware and software. In addition, this convenient HP Care Pack packaged service makes software updates available to you at substantial savings. Choose Support Plus 24 when you need to: Improve uptime with responsive hardware and software services available anytime Cost-effectively obtain expert 24x7 multivendor hardware and software support Enjoy consistent service coverage across geographically dispersed sites Update HP and selected third-party software at a predictable cost Take advantage of subscription savings on software updates HP SAN Solution Service Get your SAN implementation right - right from the start. Storage has become essential to the growth and agility of your business. That's why choosing an HP SAN as your data management solution is a smart business decision. But your SAN can deliver the results you need only if it is implemented correctly and integrated with your business. SAN installation, startup, and integration call for specialized expertise in planning and design, hardware configuration, network software installation, and operability verification. Your SAN needs to be configured for high performance and availability. And it needs to be integrated with your applications, management environment, and business processes. Product Name Service Name Care Pack Services Product # and Band HP StorageWorks 4/256 3-Year HP Support Plus HA111A3-80D SAN Director 24 HP StorageWorks 4/256 3-Year HP Support Plus HA111A3-80E SAN Director Power Pack 24 HP 4/256 SAN Director 3-Year HP Proactive 24 HA111A3-4CD 16-port 4Gb FC Blade for SANs HP 4/256 SAN Director 3-Year HP Proactive 24 HA111A3-80F 32-port 4Gb FC Blade for SANs HP 4/256 SAN Director 3-Year HP Proactive 24 HA111A3-87H 48-port 4Gb FC Blade for SANs HP SAN Director 16-port 3-Year HP Proactive 24 HA111A3-9CF 8Gb FC Blade for SANs HP SAN Director 32-port 3-Year HP Proactive 24 HA111A3-9CG 8Gb FC Blade for SANs HP SAN Director 48-port 3-Year HP Proactive 24 HA111A3-9K3 8Gb FC Blade for SANs HP SAN Director Multi- 3-Year HP Proactive 24 HA111A3-8S1 Protocol Router Blade for SANs HP 4/256 SAN Director 3-Year HP Proactive 24 HA111A3-7JX iSCSI Blade for SANs

Product Number A7988B A7989B A7990B A7991B AG561B AK858B AK859B AK860B AG461B AG671B

Page 10

Related Services
Services that will enhance the user experience in many product deployments. 3-Year HP Critical Service 3-Year HP Critical Service for SANs offers a comprehensive, robust suite of proactive and reactive services expressly designed to help you resolve for SANs complex interoperability issues and maximize uptime and data availability in your SAN environment HP Assessment Service for HP Assessment Service for SANs offers customized technical and operational guidance to customers with a deployed storage area network (SAN) SANs infrastructure, and provides recommendations to help improve availability levels and ongoing management of your SAN environment. Product Number Product Name Service Name Care Pack Services Product # and Band A7988B HP StorageWorks 4/256 3-Year HP Critical Service HA111A3-80D SAN Director for SANs A7989B HP StorageWorks 4/256 3-Year HP Critical Service HA112A3-80E SAN Director Power Pack for SANs A7990B HP 4/256 SAN Director 3-Year HP Critical Service HA112A3-4CD 16-port 4Gb FC Blade for SANs A7991B HP 4/256 SAN Director 3-Year HP Critical Service HA112A3-80F 32-port 4Gb FC Blade for SANs AG561B HP 4/256 SAN Director 3-Year HP Critical Service HA112A3-87H 48-port 4Gb FC Blade for SANs AK858B HP SAN Director 16-port 3-Year HP Critical Service HA112A3-9CF 8Gb FC Blade for SANs AK859B HP SAN Director 32-port 3-Year HP Critical Service HA112A3-9CG 8Gb FC Blade for SANs AK860B HP SAN Director 48-port 3-Year HP Critical Service HA112A3-9K3 8Gb FC Blade for SANs AG461B HP SAN Director Multi- 3-Year HP Critical Service HA112A3-8S1 Protocol Router Blade for SANs AG671B HP 4/256 SAN Director 3-Year HP Critical Service HA112A3-7JX iSCSI Blade for SANs

Page 11

eSupport
HP eSupport is a portfolio of technology-based services that assist you with managing your business environment - from the desktop to the data center. Support Portal The HP support portal provides one-stop access to the information, tools and services you need to manage the daily operations of your IT environment. Features include: Access to self-solve tools (including search technical knowledge base) Efficient logging and tracking of support cases Collaboration with other business and IT professionals Download of patches and drivers Access to diagnostic tools Proactive notification of relevant information Access to certain features of the support portal requires an HP service agreement. To access the support portal, visit: http://www.hp.com/support Remote Support Technology (RST)-HP Remote Support Pack Taking a more proactive approach to IT support, the HP Remote Support pack plug-in module easily integrates with HP Systems Insight Manager to provide a powerful, unified "single pane of glass" solution for onsite and remote management. HP Remote Support Pack enhances HP Systems Insight Manager with intelligent event diagnosis plus the automatic submission of hardware event notifications securely to HP support, including acknowledgment and status returns. It adds remote configuration collections to allow the delivery of assessment and proactive services for your SAN storage and HP-UX environments. Customer Technical Training Consider education as an integral part of your strategy to get the best return on investment for your HP storage solution. HP offers a variety of training courses on storage software, networking, archiving and disk storage systems. Our classes are available in many delivery modalities from traditional instructor-led courses at one of our 80 training centers worldwide to on-site training customized to your needs or online. www.hp.com/learn/storage HP Services continues to be recognized for service and support excellence by customers, partners, industry organizations and publications around the world. Recent honors and award reflect our services team's dedications, technical expertise, professionalism and uncompromising commitment to customer satisfaction. For a list of all our awards, please visit: http://h20219.www2.hp.com/services/cache/433028-0-0-225-121.html. For more information about HP Care Pack Services for Storage, please visit: http://www.hp.com/hps/storage If you have specific questions, contact your local HP representative. Contact information for a representative in your area can be found at "Contact HP" http://www.hp.com

Targeted Environment Port Bandwidth Aggregate device bandwidth OS Support Storage system support Ports
NOTE: Please Refer to SAN Design Guide http://www.hp.com/go/sandesign or http://www.hp.com/go/sandesignguide XP, EVA, MSA 20 external per EVA Controller Pair B-series Optional Upgrade 4 or 8 external / 8 or 16 internal HP Optional Upgrade No 18 ports: 16 FC and 2 Gigabit Ethernet HP Optional Upgrade No 18 ports: 16 FC and 2 Gigabit Ethernet HP Optional Upgrade to chassis Optional Upgrade to DC SAN Director Backbone Chassis Blade in SAN Director Yes (Included)
SFP Advanced Trunking Adaptive Networking Included with Power Pack+ or Optional Upgrade Form factor Zoning Software Embedded Yes (Included)

Embedded Yes (Included)

1U Yes (Included)

Page 14

Hot plug, redundant power supplies Hot plug fans Yes, in EVA 4400 Enclosure Yes, in EVA 4400 Enclosure
Yes, in BladeSystem Enclosure Yes, in BladeSystem Enclosure

Yes Yes

Yes, in SAN Director chassis Yes, in SAN Director chassis

Page 15

Configuration Information
Step 1 Base Configuration and Power Pack
Select one: Model Model Description StorageWorks 4/256 SAN 256-port capable Fibre Channel Director with 2 control processors, 2 power supplies, rack rails, Zoning, Web tools. Does not include Port blades or SFPs Director StorageWorks 4/256 SAN 256-port capable Fibre Channel Director with 2 control processors, 2 power supplies, rack rails, Zoning, Web tools, Advanced Performance Monitor, Fabric Watch, ISL Director Power Pack Trunking, Extended Fabrics. Does not include Port blades or SFPs Part Number A7988B A7989B
Step 2 Additional Port Configurations
Model Description Quantity 16-port 4Gb/s Director Blade Add the appropriate 4/16 port blade NOTE: Requires optical transceivers for each port as listed quantity of 16-port blades below. to meet requirements 32-port 4Gb/s Director Blade Add the appropriate 4/32 port blade NOTE: Requires optical transceivers for each port as listed quantity of 32-port blades below. to meet requirements 48-port 4 Gb/s Director Add the appropriate 4/48 port blade NOTE: Requires optical transceivers for each port as listed quantity of 48-port blades below to meet requirements NOTE: If the 4/256 SAN Director was manufactured prior to 9/30/06, customers installing the 4/48 blade for added port connectivity beyond 256 ports will need to order the new high density cable management comb to accommodate the increase number of fiber optic cables 16-port 8Gb/s Director Blade Add the appropriate 8/16 port blade quantity of 16-port blades NOTE: Requires B-series optical transceivers (AJ716A, and AJ715A) for each port as listed below. to meet requirements 32-port 8Gb/s Director Blade Add the appropriate 8/32 port blade quantity of 32-port blades NOTE: Requires B-series optical transceivers (AJ716A, and AJ715A) for each port as listed below. to meet requirements 48-port 8Gb/s Director Blade Add the appropriate 8/48 port blade quantity of 48-port blades NOTE: Requires B-series optical transceivers (AJ716A, and AJ715A) for each port as listed below. Requires to meet requirements additional power supplies (AG460A) 6-port 10Gb/s Director Blade Add the appropriate 10/6 port blade NOTE: Requires optical XFP transceivers for each port as quantity of 6-port blades to listed below. Requires additional power supply (AG460A) meet requirements if the 4/256 SAN Director is fully populated with the 10/6 blade. A maximum of 4 iSCSI HP StorageWorks B-Series 16 ports (8 Fibre Channel and 8 Gigabit Ethernet) per blade enables bridging of iSCSI hosts to Fibre Channel blades supported per iSCSI Blade Fabrics Director chassis NOTE: Requires additional power supplies (AG460A) and optical transceivers listed below. Part Number A7990B

A7991B

AG561B

AK858B

AK859B

AK860B

AK861B

AG671B

Page 16
HP StorageWorks Multi- 18 ports (16 Fibre Channel and 2 Gigabit Ethernet) multi- A maximum of two BSeries MP Router Blades protocol Router Blade for protocol router providing 2 types of SAN services: FC subnet routing, and FCIP tunneling. Includes rack mount supported per Director B-Series kit, advanced zoning and web tools. chassis NOTE: Requires additional power supplies (AG460A) and optical transceivers listed below. HP StorageWorks B-Director Cable Mgmt Comb One per chassis High Density Cable One per Chassis Management Comb Add Software: Fabric Watch, ISL Trunking, Extended Fabric, Advanced Performance Monitoring Power Pack Software Bundle for SAN Director HP StorageWorks MP Blade Perf Extens LTU: Optional Software: Optional software license to activate the high performance extension services for either IP or FC connectivity in the MP Blade. IP and FC extension services are mutually exclusive. It includes the Encryption Services License. HP StorageWorks B-Series Fabric Watch Dir Swt LTU ALL HP StorageWorks B-Series ISL Trunking Dir Swt LTU ALL HP StorageWorks B-Series Advanced Performance Monitor Dir Swt LTU ALL HP StorageWorks B-Series Extended Fabric Dir Swt LTU ALL HP StorageWorks 4/256 Director FICON Cup Active License* *Check for availability in region; only supported in XP Storage array environments Data Center Fabric Manager Enterprise

AG461B

AG562A

330882-B21 T4427A

334218-B21 325887-B21 334219-B21 325886-B21 T4401A* T5542A
Step 3 Additional Options
Additional Power Supply HP StorageWorks Power Supply for Director Chassis - Quantity 2 NOTE: 4 power supplies are required when using the B-Series iSCSI Blade, Multiprotocol Router Blades, FC10-6, or FC8-48 Blade. 8Gb Short Wave B-Series FC SFP+ 1 Pack NOTE: Only the "B-Series" branded SFPs are supported with the 8/16 Fibre Channel Blade (AK858A), 8/32 Fibre Channel Blade (AK859A), and the 8/48 Fibre Channel Blade (AK860A) 8Gb Long Wave B-series 10km FC SFP+ 1 Pack NOTE: Only the "B-Series" branded SFPs are supported with the 8/16 Fibre Channel Blade (AK858A), 8/32 Fibre Channel Blade (AK859A), and the 8/48 Fibre Channel Blade (AK860A) 4Gb/s Short Wave FC SFP 1 Pack 4Gb Short Wave B-Series FC SFP 1 Pack NOTE: Only the "B-Series" branded are supported with the 8/16 Fibre Channel Blade (AK858A), 8/32 Fibre Channel Blade (AK859A), and the 8/48 Fibre Channel Blade (AK860A) 4Gb Long Wave FC SFP 1 Pack - 10km HP 4Gb Long Wave B-Series FC SFP 1 Pack - 10km NOTE: Only the "B-Series" branded are supported with the 8/16 Fibre Channel Blade (AK858A), 8/32 Fibre Channel Blade (AK859A), and the 8/48 Fibre Channel Blade (AK860A) 2Gb/s Long Wave FC SFP 1 Pack - 10 km 2Gb/s Long Wave FC SFP 1 Pack - 35 km AG460A

Optical Transceivers

AJ716A

AJ717A

A7446B AJ715A

AE493A AK870A

A6516A 300836-B21

Page 17

HP BLc 10Gb SR XFP Opt Kit NOTE: Required when using a 10/6 Fibre Channel Blade (AK861A) HP BLc 10Gb LR XFP Opt Kit NOTE: Required when using a 10/6 Fibre Channel Blade (AK861A) Optical cables PremierFlex OM3+ type cables 0.5m PremierFlex LC/LC Multi-Mode Optical Cable 1m PremierFlex LC/LC Multi-Mode Optical Cable 2m PremierFlex LC/LC Multi-Mode Optical Cable 5m PremierFlex LC/LC Multi-Mode Optical Cable 15m PremierFlex LC/LC Multi-Mode Optical Cable 30m PremierFlex LC/LC Multi-Mode Optical Cable 50m PremierFlex LC/LC Multi-Mode Optical Cable LC-LC type cables 2 m LC-LC Multi-Mode Fibre Channel Cable 5 m LC-LC Multi-Mode Fibre Channel Cable 15 m LC-LC Multi-Mode Fibre Channel Cable 30 m LC-LC Multi-Mode Fibre Channel Cable 50 m LC-LC Multi-Mode Fibre Channel Cable LC-SC type cables 2 m LC-SC Multi-Mode Fibre Channel Cable 5 m LC-SC Multi-Mode Fibre Channel Cable 15 m LC-SC Multi-Mode Fibre Channel Cable 30 m LC-SC Multi-Mode Fibre Channel Cable 50 m LC-SC Multi-Mode Fibre Channel Cable

443756-B21 443757-B21

BK837A BK838A BK839A BK840A BK841A BK842A BK843A 221692-B21 221692-B22 221692-B23 221692-B26 221692-B27 221691-B21 221691-B22 221691-B23 221691-B26 221691-B27
Fibre Channel Standards Up to 384 ports, universal (E, F, and FL); up to eight Fibre Channel modules, either 16 port, 32 port or 48 port And Revisions

Page 18

Technical Specifications

Fibre Channel ports

Up to 384 ports, universal (E, F, and FL); up to eight Fibre Channel modules, either 16 port, 32 port, or 48 port Redundant (active/standby) control processor modules Control processor Full fabric architecture: Scalability http://h18006.www1.hp.com/products/storageworks/san/documentation.html 1.063 Gb line speed, full duplex; 2.125 Gb line speed, full duplex ; 4.25 Gb line speed, full duplex; Performance auto-sensing of 1 Gb, 2 Gb, 4Gb, and 8Gb port speeds; optionally programmable to fixed port speed; speed matching between 1 Gb, 2 Gb, 4Gb, and 8Gb ports Up to eight 8 Gbit/sec ports per ISL trunk; up to 64 Gbit/sec per ISL trunk. Up to two 8-port trunk groups ISL Trunking supported on 16-port blades, four 8-port trunk groups supported on 32-port blades, and eight 8-port trunk groups supported on 48-port blades. ISL Trunking at 2 Gbit/sec for compatibility with B-Series legacy switches and directors. 3.264 Tbit/sec Aggregate bandwidth <2.1 sec any port to any port at 2 Gbit/sec, cut-through routing; <3.6 sec any port to any port Switch latency at 4 Gbit/sec, cut-through routing 2112-byte payload Maximum frame size 1024 per blade dynamically allocated up to 255 per port Frame buffers Class 2, Class 3, Class F (inter-switch frames) Classes of service FL_Port (all except on 48-port blades), F_Port, E_Port, self-discovery based on switch type (U_Port); port Port types type control for EX_Port, VE_Port and Vex_Port; Gigabit Ethernet for VE_Port and Vex_Port Fabric Switches supporting unicast, multicast (255 groups), and broadcast Data traffic types Hot-pluggable, industry-standard Small Form-factor Pluggable (SFP), LC connector; Short-Wavelength Media types Laser (SWL) up to 500 meters (1,640 feet); Long-Wavelength Laser (LWL) up to 10 km (6.2 mi); Extended Long- Wavelength Laser (ELWL) up to 100 km (62.1 mi); distance depends on fiber optic cable and port speed Note: For 4 Gbit/sec operations, only SWL is supported. Simple Name Server; Registered State Change Notification (RSCN); Alias Server (multicast); Advanced Fabric services Zoning; WebTools; Enhanced group Management, Fabric Watch; ISL Trunking (optional); Advanced Performance Monitoring; FICON Control Unit Port (CUP) on 4/16 and 4/32 SAN Director blades Redundant (active/standby) control processor modules; automatic failover; High availability Control Processor non-disruptive software upgrades; dual-flash memory on each control processor to store two software images Hot swappable Modules Fully passive Backplane Dual AC inputs Input power Dual AC-DC power supply modules Chassis power Three blower assembly modules (two operational required) Cooling Telnet; RADIUS, SNMP (FE MIB, FC Management MIB); WebTools; Enhanced group Management, Management Fabric Watch Optional; Fabric Access layer Data Center Fabric Manager 10/100 Ethernet (RJ-45), in-band over Fibre Channel (requires fabric); two serial ports (DB-9) per Management access control processor module POST and embedded online/offline diagnostics Diagnostics Rack-mountable in a standard 19-inch (48.26 cm) EIA rack; Telco-style midMechanical specifications Mounting mounting available Up to 768-ports per 42U rack Ports per rack Rear panel-to-door airflow Enclosure 17.22 in (43.74 cm) Width 24.11 in (61.24 cm) 14U Height

Page 19

Depth (without door) Depth (with door) Weight

Environment

Temperature Humidity

Altitude Shock Vibration

Heat dissipation

Supported power range

27.90 in (70.90 cm) 29.20 in (74.20 cm) 95 kg (210 lb) for 128-port configuration (eight FC4-16 blades, without media) 98 kg (216 lb) for 256-port configuration (eight FC4-32 blades, without media) 98 kg (216 lb) for 384-port configuration (eight FC4-48 blades, without media) 32 to 104 F (0 to 40 C ) Operating -25 to 70 C (-13 to 158 F) Non-operating 5% to 85% non-condensing at 104 F (40 C) Operating 0% to 93% Non-operating and storage (non-condensing) Up to 3000 meters(9800 feet) 20 g,11 ms, half sine Operating: 20G, 11 ms, half sine 1G p-p, 5Operating 500Hz, 1 octave min Non-operating: 33G, 11 ms, half sine 2.4G p-p, 5-500Hz, 1 octave min Operating: 5G p-p, 0 to 3kHz at 1.0 octave min Non-operating Non-operating: 10G p-p, 0 to 5 kHz at 1.0 octave min 1160 W or 3949 BTU (eight 48-port blades and two CP4 blades) 915 W or 3115 BTU (eight 32-port blades and two CP4 blades) 710 W or 2425 BTU (eight 16-port blades and two CP4 blades) 200-240 VAC, 12A single phase Nominal 180-264 VAC, auto-sensing Operational 40A maximum, peak In-rush current 47-63 Hz Input frequency range NOTES: A fully loaded switch requires a maximum of 750 Volt-Amps. A fully populated 4/256 SAN Director with no MP router l blades, 10/6 blades, iSCSI blades, or FC8-48 blades can function by the power supplied with two power supplies in redundant power mode.
Certified maximum Interoperability
A 4/256 SAN Director populated with either the B-Series MP Router blade (,the B-Series iSCSI Blade, the 10/6 blade ,or the FC8-48 blade requires four functional power supplies. Two power supplies Output voltages (each): 48V at 20 amps; 12V at Power Supplies included with each director 4 amps Maximum output power: 1000 watts AC inrush current 40A maximum, peak Power Cables included Two, IEC 60320/C19 to IEC 60320/C20 to Power Cables connect from the director to the rack PDU Two, IEC 320, EN60320 C19-Angled, 16A/250VAC to L6-20 to connect from director to wall outlet Please Refer to SAN Design Guide at the following URL http://www.hp.com/go/SANDesignGuide SAN Switch 8 SAN Switch 16 SAN Switch 8-EL DA - 12344 Worldwide Version 19 September 27, 2010 Page 20

Switch core Fabric latency Hardware Options Supported software
SAN Switch 2/8V 4/8 SAN Switch SAN Switch 16-EL SAN Switch 2/16V SAN Switch 2/16N FF 4/16 SAN Switch Integrated /32 SAN Switch 2/32 4/32 SAN Switch 4/64 SAN Switch Core Switch 4/64 SAN Director 2/128 DC04 SAN Director DC SAN Backbone Director SAN Switch 2/16 SAN Switch 1/16-EL MSA SAN Switch 2/8 SAN Switch 8/8 SAN Switch 8/24 SAN Switch 8/40 SAN Switch 8/80 Brocade 4Gb SAN Switch for p-class HP BladeSystem Brocade 4Gb SAN Switch for c-class HP BladeSystem 400 MP Router B-Series MP Router Blade Non-blocking < 2 sec. with no contention, cut-through routing 16, 32 and 48 port FC Card, iSCSI blade, MP-Router blades ; SFP media Telnet, SNMP, WebTools, Zoning, Fabric Watch Optional, Fabric Manager Optional
Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Page 21

Product environmental attributes - IT Eco Declaration 2004
Brand Manufacturer Manufacturers representative Contact person Postal address Postal code /City/ Country Telephone (incl. country code) Mobile phone (incl. country code) Fax (incl. country code) Internet site Additional information Hewlett-Packard Hewlett-Packard Name: e-mail: Name: e-mail: itecodeclaration.ww@hp.com Hans Wendschlag , HP Sweden Logo
+ + + http://www.hp.se/environment Latest version of this document can be found at: www.hp.se/itecodeclarations or http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoservers.ht ml. The company environmental profile, which is issued for the company and isn't product related, can also be found at the first website. Check Item 14 for explanatory information regarding specific item responses.
This declaration covers the below listed Information Technology product categories* with specified product identity (ID) such as type/model number.
Computer system unit CPU Display/ monitor Printer Black/white Product identity Mobile/portable computer Keyboard Scanner Server Digital Projector Camera Other IT product, specify:
Copier Fax Multifunction product Colour Pages per minute:
Brocade SW48000HP HP StorageWorks 4/256 SAN Director Switch A7989A

June 2004

Issue date May 2006 Guideline document (Version of Guideline document used for completion of this declaration (month, year)) This IT Eco Declaration consists of three documents: Company environmental profile: Divided into two sections, legal and market requirements
Product environmental attributes: Divided into two sections, legal and market requirements Guideline document with extensive clarifications, comments and references. The latest version of all these documents can be downloaded from: www.itecodeclaration.org Notes: Voluntary vs compulsory requirements: Items marked V are voluntary to answer, all other items must be answered. The latest version of the Guideline document must be used. Specify in table above according to which version of the guideline document this declaration has been completed. This version of the IT Eco Declaration is adjusted to the document Product-related Environmental Attributes, issued by the European Association for Standardizing Information and Communication Systems (ECMA), TR/70, version 1999. This version of the IT Eco Declaration meets the basic principles of ISO14021:1999, Environmental labels and declarations Selfdeclared environmental claims (Type II environmental labelling). When references are given to standards like ISO, IEC and EN, the latest version should always be referred to. For telecommunication products, use eco declaration for telecommunication products. This IT Eco Declaration version can be used from October and shall be used for products announced after December 1 2003. The IT Eco Declaration is a system for declaration of environmental aspects of IT and telecom products, developed by the Nordic IT organisations, IT-Fretagen in Sweden, ITB in Denmark, IKT-Norge in Norway and TTK ry in Finland. This IT Eco Declaration may only be used after having signed a contract with at least one of these organisations.
Association of the Swedish IT and Telecom Industry www.itforetagen.se
Norwegian IT-companies Organisation www.ikt-norge.no
IT-Brancheforeningen Kontor & Data www.itb.dk
Finnish Association of Office Technology Traders www.ttkry.com

Version June 2004

Page 1 (5)
Copyright Association of the Swedish IT and Telecom Industry 2000. Reproduction of this form without permission is prohibited by the copyright law 1960:729. The prohibition includes any kind of reproduction, by electronic or any other means.

Page 2 (5)

Product identity Issue date

SW48000

Logo Requirement met Yes No n.a.
Product environmental attributes - Legal requirements
Item P1 P1.1 P1.2 P1.3 P1.4 P1.5 Additional information regarding each item may be found under P14. Environmental conscious design Product parts are free from, i.e. less than 0.1% by weight (b.w.), CFCs & HCFCs, asbestos, PCB & PCT (3093/94/EEC, 76/769/EEC, 6th amendment, 99/77/EEC, 82/828/EEC) Components are free from, i.e. less than 0.1% b.w., mercury (Hg), except for small amounts of mercury which are allowed in light sources. (SE SFS 1998:944) Cadmium (Cd) content of colorants, stabilizers, and surface treatments does not exceed, 0.01% b.w., as specified in 76/769/EEC, 10th amendment, 1991/338/EEC. Paints are free from lead (Pb), i.e. less than 0.1% b.w., (76/769/EEC, 8th amendment, 89/677/EEC) Paints, coatings, plastics, rubbers and seals are free from flame retardants and/or plasticizers containing Short Chain Chlorinated Paraffines (SCCPs) with more than 0,1% by weight, 10-13 carbon atoms, minimum 48% chlorine by weight, CAS number 63449-39-8 (NO MVD regulation 1544, 2000.12.13 and FI 416/2003). If the product is intended for direct and prolonged skin contact, the surfaces do not release nickel (Ni) above levels specified in (76/769/EEC, 8th amendment, 94/27/EEC) Batteries If hazardous batteries are used in the product, they are labelled. (93/86/EEC). If batteries are used in the product they are free (<0.0005% by weight) from mercury (Hg) (98/101/EC) Electrical safety, EMC and connection to the telephone network The product meets the Low Voltage Directive (LVD) regarding electrical safety (73/23/EEC & 93/68/EEC) The product meets the EMC Directive regarding electromagnetic compatibility (89/336/EEC) If product is intended for connection to a public telecom network or contains a radio transmitter, it meets the EU R&TTE Directive (1999/5/EC) The product is CE-marked (93/68/EEC) Consumable materials If a photo conductor (drum, belt etc.) is used in the product, it is free (<0.01% by mass) from cadmium (Cd) (76/769/EEC and 91/338/EEC) If an ink is used in the product, it is free (<0.01% by mass) from cadmium (Cd) (91/338/EEC) If toner/ink (or corresponding) are used in the product, they are classified and if required labelled in accordance with EU directives Packaging materials The sum of the concentration levels of lead, cadmium, mercury, and hexavalent chromium present in packaging or packaging components does not exceed 0.01% by weight (100 ppm). (94/62/EC). The product packaging material is free from CFC/HCFC.

P1.6 P2 P2.1 P2.2 P3 P3.1 P3.2 P3.3 P3.4 P4 P4.1 P4.2 P4.3 P5 P5.1 P5.2
This product meets above listed legal requirements

Page 3 (5)

Product Identity Issue date Logo
Product environmental attributes - Market requirements
Item P6 P6.1 P6.2 P6.3 P6.4 P6.5 V P6.6 P6.7 P6.8 P6.9 P6.10 V P6.11 P6.12 V P6.13 V = Voluntary to answer. Additional information regarding each item may be found under P14. Environmental conscious design Disassembly, recycling Gluing/welding of different material has been avoided. Plastic materials in covers/housing are free from surface coating. Mechanical plastic parts >100g, consist of one material or of easily separable materials. Plastic parts >25g, have material codes according to ISO 11469. Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools. If labels are required they should be separable. (This requirement does not apply to safety labels). Product lifetime Upgrading of the product can be done with commonly available tools Processor, memory and cards of various types can be changed/upgraded. Hard disk, CD/DVD drives and / or floppy drive can be changed/upgraded. Spare parts are available after end of production for: Material requirements Plastic parts >25g are free from PBB/PBDE, i.e less than 0.1% b.w. Plastic parts >25g are free from flame retardant substances/preparations above 0.1% classified as R45/46, R50/51/52/53 and R60/61 (67/548/EEC) Chemical specification of flame retardants in plastic parts >25g according to ISO 1043-4 declared below: Product cover/ housing: Printed circuit boards: FR-4 Other plastic parts: Product cover/housing material type, specified according to ISO 1043-1 Material type ABS Material type PC-ABS Electrical cable insulation material specification Light sources are free from mercury, i.e less than 0.1% b.w. If mercury is used specify: Number of lamps & max. mercury per lamp Mechanical plastic parts > 25g are free from lead (Pb), i.e. less than 0.1% b.w. Batteries Product is free from batteries defined as hazardous (91/157/EEC) Batteries are used that meet the European eco-label (EU Flower) criteria (2001/687/EC & 2001/686/EC) Energy consumption n.a. n.a. Maximum power W V Operation W Low power mode W Off mode W W Deep sleep mode W Sleep mode If the product is in Stand by mode, it reverts to: Low power mode in min Sleep mode in min Deep sleep mode in min V Off mode in min 2-sided printing/copying (duplex) from 1-sided originals is an integrated product function. Information about the energy save function is given in the user documentation. (Not applicable when no instruction is needed to operate the energy save function, i.e. the energy save function cannot be adjusted or inhibited by the user.) The product meets the requirements of ENERGY STAR. The product meets the requirements of GEEA. Display meets the energy save requirements of the European eco-label (EU Flower) (2001/686/EC & 2001/687/EC). Desktop or portable computer meets the energy save requirements of the European eco-label (EU Flower) (2001/686/EC & 2001/687/EC) Material type PVC mg

Requirement met Yes No n.a.

5 years

V P6.14 P6.15 P6.16 V P6.17 V P6.18 V P7 P7.1 P7.2 V P8 P8.1 V
Product parts are free from beryllium (Be) and beryllium oxide (BeO), i.e. less than 0.1% b.w.

V P8.2 P8.3

P8.4 P8.5 V P8.6 V V

Page 4 (5)

Product environmental attributes - Market requirements (continued)
Item P9 P9.1 P9.2 V V = Voluntary to answer. Additional information regarding each item may be found under P14. Noise characteristics (Measured and declared according to ISO 7779 and ISO 9296) Declared A-Weighted Sound Power Level, LWAd (1B = 10 dB) B Idling mode: LWAd : Operating mode: LWAd : The product meets the acoustic noise requirement of: B TCO Blue Angel European eco-label (EU Flower) Nordic Swan

P9.3 V

P10 P10.1 P10.2 V
Declared A-Weighted Sound Pressure Level, LpAm (measured at the operator position if applicable; otherwise measured at the 1m bystander positions). Idling mode: LpAm: 58.9 dB Operating mode: LpAm: 58.9 dB Test position: LpAm: Operator position Bystander positions Test position for PC tower LpAm: Table top Floor standing Emissions Chemical emission test performed according to RAL-UZ , other standard , specify: The test covers: Dust Ozone Styrene TVOC Benzene The product meets the requirement for chemical emission in: TCO Blue Angel Nordic Swan
P11 P11.1 P11.2 P11.3 V P11.4 V P12 P12.1 P12.2 P12.3 P13 P13.1 P13.2 V P13.3 V P13.4 V P14
Display/monitor/portable computer meets the requirement for low frequency electromagnetic fields in: MPR-II TCO prEN50279- A , -B , -C Consumable materials The photo conductor is free from selenium. If the photo conductor contains selenium there is a system for waste recovery. Safety Data Sheet/Material Safety Data Sheet (SDS/MSDS) is available for toner/ink (99/45/EC & 2001/58/EC) Paper containing recycled fibres and meeting requirements of ENV12281 can be used in the product. Ergonomics The computer system meets the ergonomic requirements of EN 29241-3, -7, -8 for CRT displays and EN-ISO 13406-2 for flat panel displays. The product keyboard meets the requirements of ISO 9995 and EN 29241-4. The computer input device meets the requirements of ISO 9241-9. Packaging and documentation Product packaging: material type(s): corrugated paper Product plastic packaging is free from chlorine User and product documentation are free from chlorine bleached paper Additional information "The IT Eco Declaration covers the product base model only. If optional items with moving parts are added, like extra hard disks or graphic cards with fans etc, these can change energy and acoustics values for which HP can take no responsibility."

weight (kg):

Plastic packaging material is marked according to DIN 6120, ISO 11469 or ISO 1043, 1-4.

Page 5 (5)