HP StorageWorks All-in-One SB600c Storage Blade Solution quick start instructions

About this document

These instructions are intended for professionals who will be installing, setting up, and configuring the All-in-One SB600c Storage Blade Solution. Experience with the following technologies is helpful, but not required: HP BladeSystem c-Class Enclosures and Onboard Administrator HP Integrated Lights-Out 2 (iLO 2) Standard Firmware Microsoft administrative procedures and system and storage configurations The Quick Start poster provides you with basic instructions to get up and running using the system default options. For more detailed information, or information about non-default options available to you, refer to the documentation included with your product. Other HP documentation can be found with this product, on the documentation CD, and on the HP documents Web site at: http://www.hp.com/support/manuals.
Important safety information
Important Safety Information
Ls dokumentet Vigtige sikkerhedsoplysninger p dokumentations-cd'en, fr produktet installeres.
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Les "Viktig sikkerhetsinformasjon" p dokumentasjons-CDen fr du installerer dette produktet.
Trkeisiin turvatietoihin" Documentation CD -levyll ennen tuotteen asentamista. Ls dokumentet Viktig skerhetsinformation p dokumentations-cd:n innan du installerar denna produkt.
Printed on at least 50% total recycled fiber with at least 10% post-consumer paper Copyright 2007 Hewlett-Packard Development Company, L.P. First edition (October 2007) Printed in the US. www.hp.com Part no. 452694-002

452694-002

Prepare for installation
Check kit contents Unpack the HP StorageWorks All-in-One SB600c Storage Blade Solution and confirm that the following components are included: HP StorageWorks AiO SB600c Storage Blade HP StorageWorks AiO SB600c Server Blade Local I/O cable Documentation Kit, Safety and Disposal Documentation CD HP StorageWorks AiO Storage Blade System Recovery DVD End User License Agreement NOTE: If your HP AiO SB600c Storage Blade Solution is factory-integrated, it will be included in an HP BladeSystem c-Class Enclosure. Determine an access method Before installing the storage system hardware, decide on an access method that will be used to connect to the storage server.
Access method Direct attach Procedure Connect a monitor, keyboard, and mouse directly to the server blade using the local I/O cable. Access the storage system through a client running Internet Explorer 5.5 (or later). Access the storage system through a client running Remote Desktop Connection. Access the storage system through a client running HP Integrated Lights-Out 2. Requirements Monitor, USB keyboard, USB mouse, and local I/O cable are required. ActiveX controls must be enabled on the remote client, the serial number or IP address of the storage system is required, and the All-in-One Storage System installation process must be complete. Serial number or IP address of the storage system is required and the All-in-One Storage System installation process must be complete. iLO 2 Network Settings and an Onboard Administrator Ethernet connection to the management network are required.

Remote browser

Remote desktop
Install the storage solution hardware and power on
Install the storage and server blades IMPORTANT! If your HP AiO SB600c Storage Blade Solution is factory-integrated, the server and storage blades are pre-installed in an HP BladeSystem c-Series Enclosure. See the documentation that ships with the enclosure for instructions on connecting and powering on the enclosure. The AiO SB600c Storage Blade Solution consists of a server blade and storage blade. These blades must be installed adjacent to one another in an HP BladeSystem c-Class Enclosure as a pair. The figures at right indicate the proper location of server blade/storage blade pairs in device bays 1 and 2, 3 and 4, and so on. 1. 2. 3. 4. 5. Remove the blank from an unoccupied device bay. Remove the enclosure connector cover from the storage blade. Open the locking clip. Install the storage blade by inserting it fully into the device bay and closing the locking clip. Remove a blank from the adjacent device bay and repeat steps 2 through 4 to install the partner server blade.

Power on the server blades The enclosure Onboard Administrator initiates an automatic power-up sequence when the server and storage blades are installed. Note that the power-up sequence may take up to one minute. If this default setting is changed, use one of the following methods to power on the server blade: Use a virtual power button selection in the enclosure Onboard Administrator. Press and release the Power On/Standby button on the server blade. The system starts and begins the HP StorageWorks All-in-One Storage System installation process. The installation process takes approximately 10-15 minutes and requires no user interaction.
Connect to the storage system
Direct attach method 1. Connect the local I/O cable (4) to the server blade. 2. Connect a monitor (1), USB mouse (2), and USB keyboard (3) to the local I/O cable.
Remote methods In order to access the storage system using the remote desktop or remote browser method, you must first install, map, and connect the enclosure interconnect modules to your network. See the documentation that ships with the enclosure for detailed instructions. For iLO 2 access, the server blade iLO 2 ports and interconnect module management ports can obtain IP addresses on the management network through DHCP address, static IP address or Enclosure Bay IP Addressing (EBIPA). See the HP BladeSystem Onboard Administrator User Guide for detailed instructions. By default, the server blade is configured with 2 embedded NIC ports. These 2 embedded NIC ports map to interconnect bay numbers 1 and 2 on the c7000 enclosure and interconnect bay number 1 on the c3000 enclosure. After connecting the the storage system, ensure that the HP StorageWorks All-in-One Storage System installation process has completed. After the installation process is complete, the system prompt appears. At the system prompt, enter the default user name and password: user name = administrator password = hpinvent After logging in for the first time, the Welcome screen of the Rapid Startup Wizard opens.
Set up the system with the Rapid Startup Wizard

The Rapid Startup Wizard guides you through setting up your system with basic configuration information. Before migrating data from other applications or configuring other storage settings, you should complete the Rapid Startup Wizard. 1. On the Rapid Startup Wizard Welcome screen, click Next. The following table lists the configuration data that is needed to complete the Rapid Startup Wizard and initialize the All-in-One SB600c Storage Blade Solution.

Administrator Identity

User name User password The system administrators user name, which is set by default to administrator. The system administrators password, which is set by default to hpinvent.
Alert E-mail Notification
Send alert e-mails to Send alert e-mails from SMTP server name or IP address E-mail address for critical, warning, or informational messages about system status. Must be a valid, well-formed e-mail address that will appear as the sender of system status e-mail alerts. Must be an e-mail server on your network that supports the Simple Mail Transfer Protocol (SMTP).
SNMP Settings (to be completed only if needed)
Contact person System location Community names Trap destinations System administrator for the storage system. The contact and location will be provided to any SNMP management computer that requests them. Any text string, such as location or phone number. A community name is used for network authentication when sending outgoing SNMP messages. The IP address of a management computer that will receive SNMP messages from the storage system using the above community names.
Network Interfaces (to be completed for non-DHCP configurations)
Local area connection IP address Subnet mask Default gateway DNS server WINS server A local area connection is automatically created for each network adapter that is detected. All local area connections can be renamed to prevent confusion. An Internet Protocol (IP) address is assigned to the server. If it is not automatically assigned, enter the IP address that you want to assign to the server. A mask is used to determine what subnet an IP address belongs to. The gateway in a network that the network adapter will use to access all other networks. A Domain Name System (DNS) server name is required to provide for domain name to IP address resolution. A Windows Internet Naming Service (WINS) server name is required to determine the IP address associated with a particular network computer.

Server name

Server name Assign a unique name to the storage system. This name identifies the storage system on the network.
2. On each screen of the wizard, complete the requested information.
The final screen of the Rapid Startup Wizard is a Summary page that displays the new configuration settings. If you need to make changes, you can go back to any previous wizard screen by clicking the Back button. 3. Click Finish after completing the configuration changes. You may be prompted to restart the system after applying the changes.
Prepare for data migration
After basic configuration information has been set using the Rapid Startup Wizard, a dialog box appears that provides additional storage and data migration configuration options; however, depending on your needs, an additional installation procedure might be needed before proceeding. IMPORTANT! Before using the available wizards for scheduling data migration of SQL, Exchange, or User-defined data, you must first install the All-in-One Storage Manager Agent on those application servers. Follow these instructions before performing a data migration operation. 2. Navigate to the \All-in-One Storage Manager\Agent folder on the DVD. 3. Double-click asmagentinstaller.exe. 4. Follow the on-screen installation instructions.
NOTE: If you do not need to prepare for data migration at this point in the configuration process, move on to step 6 of this procedure. Installing the All-in-One Storage Manager Agent on network application servers: 1. On the application server that stores data to be migrated, insert the HP StorageWorks All-in-One Storage Blade System Recovery DVD. NOTE: If the application server is in a remote location, use Remote Desktop Connection to access the server, copy the Agent installation files, and run the Agent installation.
After completing the All-in-One Storage Manager Agent installation on the application servers, you can then schedule data migration using the HP All-in-One Storage System wizards.
Configure storage and schedule data migration
After preparing for data migration, you can schedule the migration using the wizards that are available on the Storage Hosting screen. You can also allocate storage settings by clicking Create a shared folder. NOTE: If you do not need to perform any of these tasks at this point during the configuration process, click Close.
IMPORTANT! Because the data migration process can take a considerable amount of time to complete and because application servers are taken offline during this process, HP highly recommends that you schedule migration operations during non-business hours. HP also highly recommends that you back up application data and logs prior to migration.
Create a Shared Folder Wizard (5 screens)
Host an Exchange Storage Group Wizard (5 screens)

Host a SQL Server Database Wizard (6 screens)
Host a User-Defined Application Wizard (5 screens)
Create a Virtual Library Wizard (3 screens)

Manage your storage

After you have used the All-in-One SB600c Storage Blade Solution wizards to configure your storage settings and migrate application data, you can monitor your applications and modify settings with the All-in-One Storage Manager. In the Action pane, choose from the following views: Application View Monitors storage values for applications and shared folders. Storage View Monitors storage values for logical disks and volumes. Application Server View Monitors hosted application servers. Storage Utilization View- Monitors storage values for all applications.

QuickSpecs

Overview
HP StorageWorks All-in-One SB600c Storage Blade
Unbelievably simple. Uniquely affordable. Unquestionably reliable. Rapid data growth of both unstructured file data and structured application data from database and e-mail means storage capacity requirements continue to evolve. The AiO SB600c provides flexible expansion of storage capacity within the BladeSystem enclosure. Combining iSCSI shared storage, NAS file serving, and integrated data protection provides efficient shared storage capacity for HP BladeSystem c-Class servers. The SB600c provides a simple, affordable, and reliable network storage solution that provides many of the management, consolidation, and data protection features typically reserved for higher-priced and more complex storage products. Built on the ProLiant BL460c server and SB40c Storage Blade, the SB600c unifies internal shared storage options through the centralized HP AiO Storage Manager (ASM) interface. The SB600c internal shared storage solution provides: Application server storage (iSCSI SAN) Windows file serving (NAS) Centralized storage management and integrated data protection using HP AiO Storage Manager A fully integrated copy of HP StorageWorks Data Protector Express software for enhanced backup and recovery Shared storage within the BladeSystem enclosure eliminates the complexity of attaching to external storage. The industry standard iSCSI interface provides the benefits of shared SAN storage within the enclosure by simply using the server's embedded NICs. Radically simple management with HP AiO Storage Manager Designed for IT generalists with no storage expertise, the AiO Storage Manager (ASM) eliminates complexity by automating storage tasks and presenting capacity in familiar application-centric terms, providing a simple way to control data growth. The easy-to-use, All-in-One Storage Manager (ASM) interface reduces the time and expertise required to manage rapidly growing applications like Microsoft Exchange. ASM handles all underlying storage tasks and presents network storage in application-centric terms, giving the IT generalist newfound levels of control. Administrators can quickly and easily setup or expand data areas, migrate data from capacity constrained servers, implement disk and tape backup policies, and more. Data migration tools for Exchange 2003/2007 and SQL Server 2000/2005 include best practice recommendations which allow any IT generalist to look like a storage expert. Tools for hosting user defined applications enable flexible deployment in many different environments.
Updated processor: Systems comes with One Quad-Core Intel Xeon E5410 (2.33GHz, 1333FSB, 80w) processor preinstalled Choose the type and quantity of SFF hot plug drives to be pre-installed in the SB40c. Choose up to 6 Small Form Factor (SFF) hot plug drives: 146GB 10K 3G SAS hot plug hard drives 300GB 10K 3G SAS hot plug hard drives 250GB 5.4k SATA hot plug hard drives

DA - 12789

North America Version 6 March 6, 2009

Page 1

Highlights
HP StorageWorks SB600c All-in-One Storage Blade
Shared storage solution Managed through a single interface, the AiO SB600c Storage Blade provides shared application storage (iSCSI SAN), file serving (NAS), and data for HP BladeSystem cClass application servers protection below the cost of implementing these features using separate products. Built on the ProLiant BL460c server and SB40c Storage Blade, the AiO SB600c installs directly inside HP BladeSystem c-Class enclosures. Sharing storage between servers is more efficient and costs less to manage Bring the efficiency of over time when compared against adding additional drives to individual shared storage to your servers. The industry standard iSCSI interface provides the cost-saving Bladesystem servers. benefits of shared SAN storage within the BladeSystem c-Class enclosure using the server's embedded NICs. Best Practice toolkit makes The SB600c includes tools to easily migrate and manage data using best practice settings. For example, iSCSI storage for a Microsoft Exchange every IT Administrator look like a storage expert Storage Group can be expertly setup and migrated in fewer than 10 mouse clicks, saving you time and reducing the potential for error. Enhanced file serving for The SB600c is tuned for faster file serving performance (beyond standard clients (NAS) to improve Windows servers). Single Instance Storage (SIS) de-duplication can improve capacity utilization by 30% or more by eliminating duplicate files within productivity and shared volumes. Full text search capabilities increase the speed of end-user collaboration search. Integrated data protection Provides an easy mechanism to manage disk based snapshots for easy to ensure easy roll-back rollback, integrated data protection software for offsite and archive, hot-plug disk drives (RAID), and hardware redundancy. Data can also be replicated to and disaster recovery another system for enhanced disaster recovery. Ready to deploy- get up Designed for IT generalists with no storage expertise, these systems can be setup and actively serving files in less than 30 minutes. Microsoft Windows and running in minutes Storage Server 2003 is pre-installed to speed deployment time. HP makes data migration easy by including optimization wizards for Microsoft Exchange and SQL Server. For Exchange environments, the SB600c configuration supports up to 500 mailboxes when using the Exchange ESRP implementation guidelines. The All-in-One Storage Manager uses terms and functions that are familiar to Application-centric storage management from application administrators. Includes easy iSCSI storage management for 32bit and 64-bit Windows Server 2003 application servers. Data migration and HP simplifies operation optimization wizards for Microsoft Exchange and SQL Server. and lowers costs Industry standard HP BladeSystem hardware is backed by a 3/3/3 hardware Industry standard hardware ensures worry- warranty and 1 year software support. HP's world class support organization and partner network ensures that you free operation can quickly recover in the case of a problem. This single easy to use, integrated storage management tool can manage many aspects of the storage environment. Rapid startup tools for fast and easy installation and out-of-the box configuration Supports management and provisioning of iSCSI storage for 32-bit and 64-bit Windows Server 2003 hosts (NOTE: The MS iSCSI NOTE: Software target can be used to manage iSCSI storage for nonWindows hosts) Application data hosting and migration wizard using HP and Microsoft

Software Feature HP All-in-One Storage Specifications for the AiO Management Interface SB600c Storage Blade

Page 2

Shared Application Storage (iSCSI SAN)

File/print serving (NAS)

Integrated Data Protection
'Best Practice' storage configurations for Microsoft Exchange 2003/2007 Storage Groups and Microsoft SQL Server 2000/2005 databases. Application data hosting and iSCSI Setup wizard for other 'User Defined' Application (Oracle, mySQL, etc) File Share creation wizard with storage allocation and directory quota management. Data protection policy assignment (snapshots and backup) integrated into application migration and share creation wizards. Application-level capacity provisioning and online growth for shares, SQL Server and Exchange. SQL Server support includes data file and log directory provisioning and Exchange support includes Mailstore, Publicstore and log directory provisioning. Quota monitoring and alerting per share or application. Remote management via Microsoft Internet Explorer or Terminal Services. Support for setup and management of internal storage. Microsoft iSCSI Storage Target is compliant with iSCSI industry standards for industry standard iSCSI initiators. Specific interoperability tests have been verified for SUSE Linux Enterprise Server 10, RedHat Enterprise Linux 5, and Qlogic 4050c. MMC based console to setup iSCSI Target storage. This console can be used to setup storage for non-Windows iSCSI initiators not supported within the All-in-One Storage Manager, including setting up iSCSI boot storage for VMWare. The Microsoft iSCSI Target can be used as target storage behind a Microsoft application cluster. For more information on this implementation read the whitepaper on this topic found at: http://www.hp.com/go/AiOStorage. Native CIFS file serving support - Windows based file serving optimized for Windows clients Microsoft Services for Network File System (NFS) HP Enhanced, File Server Management Console Single Instance Storage (SIS) to eliminate duplicate files and maximize available capacity SIS can improve capacity utilization by 30% or more Full-text indexing to maximize productivity and allow for fast data retrieval. File Server Resource Manager for quotas, file screening and storage reporting Print Server management console with unlimited printer support Unlimited Client Access License (CAL) included Print Server support Easy to use print management console Unlimited printer support in Standard Edition RAID hard drive configurations (hot swappable drives) Disk-based snapshots for easy roll-back Scheduled or ad-hoc by application Managed through HP All-in-One Storage Manager Exchange and SQL Server aware snapshots ensure consistent data sets for the applications.

Page 3

Operating System
512 snapshots per independent iSCSI/Application volume. 64 snapshots for file share volumes. (NOTE: If iSCSI LUNs and file NOTE: shares are on a common volume the iSCSI snapshot limit is 448.) A fully integrated copy of HP StorageWorks Data Protector Express software provides enhanced backup and recovery operations. (NOTE: NOTE: This is the backup server LTU component of Data Protector Express and does not include any add-on licenses for features such as Bare Metal Recovery or Disk-to-Disk-to-Any functionality) Automatic discovery of tape devices Software based Virtual Tape functionality Disk-to-disk-to-any data protection Microsoft Distributed File System Replication (DFS-R) to enable replication of files to an alternate HP All-in-One Storage System, including DFS Management Console Configuration and Diagnostic Tools Support for HP StorageWorks Storage Mirroring v4.5 (AiO Edition) to enable replication and failover of both files and iSCSI LUNs. A 60-day trial version of HP StorageWorks Storage Mirroring software is included on most systems or can be downloaded from http://h18000.www1.hp.com/products/storage/software/sm/ index.html Microsoft Windows Storage Server 2003 Release 2, Standard Edition
HP AiO SB600c Storage Blade

Page 4

The AiO SB600c Storage Blade consists of two HP BladeSystem c-Class blade components; a server blade and a storage blade: One Quad-Core Intel Xeon E5410 (2.33GHz, 1333FSB, 80w) AiO SB600c server blade Processor processor, up to two supported includes: 2x4MB Level 2 cache memory 2 GB of PC2-5300 Fully Buffered DIMMs at 667 MHz, up to 4GB Memory supported Advanced ECC memory support Supporting memory interleaving (2x1); memory mirroring and online spare capacity Integrated HP Smart Array E200i RAID controller with 128MB MB Storage Controller cache with battery-backed write-cache. Supports RAID 0,1. Internal Drive Support Network Controller Two (2) Small Form Factor (SFF) 146GB 10K (SFF) SAS hot plug hard disk drives Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine, including support for Accelerated iSCSI and RDMA through optional ProLiant Essentials Licensing Kits One (1) additional 10/100 NIC dedicated to iLO 2 Management Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic). Ethernet NIC Mezzanine options for additional network ports HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem NOTE: The NC325m must be installed in mezzanine slot 2 of a half-height server blade to provide connectivity on all four ports. If installed in mezzanine slot 1 of a halfheight server blade, the NC325m will provide connectivity on 2 of the 4 ports. HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter 10GbE planned for future support One (1) internal USB 2.0 connector for security key devices and USB drive keys AiO SB600c server blade can be installed into a BladeSystem c7000 or c3000 enclosure Half-height Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (includes virtual KVM and graphical remote console at no additional cost) Windows Storage Server 2003 R2, Standard Edition pre-installed

Mezzanine Support

Internal USB Support Form Factor
Management Operating Systems

Page 5

AiO SB600c storage blade includes: Storage Controller Internal Drive Support

Form Factor

Smart Array P400 RAID controller with 256MB cache, supports RAID 0/1/5/6 (ADG). Choose the type and quantity of SFF hot plug drives to be pre-installed in the SB40c. Choose up to six drives Small Form Factor (SFF) hot plug drives: 146GB 10K SAS hot plug hard drives 300GB 10K 3G SAS hot plug hard drives 250GB 5.4k SATA hot plug hard drives AiO SB600c storage blade can be installed into a BladeSystem c7000 or c3000 enclosure HP Storage Works BL AiO 600c Storage Blade occupies two side by side slots in the BladeSystem c7000 or c3000 enclosure
Warranty and software support

Warranty

Software support
Protected by HP Services and a worldwide network of resellers and service providers. 3-year parts, 3-year Labor and 3-year on-site limited global warranty. Certain restrictions and exclusions apply. Pre-Failure Notification on processors, memory, and SAS hard drives. SATA SFF hot plug drives include a 1 year warranty. Includes 1 year HP Software Support.
Optional Software to Enhance HP All-in-One Storage Systems
HP StorageWorks Storage Mirroring (AiO Edition) - HP StorageWorks Storage Mirroring software offers a host-based application that performs remote copy over an IP LAN/WAN. Key features include asynchronous replication that can be scheduled to a fine granular level, Logical Unit Number (LUN), file or byte level. Other features include multiple replication configuration options including peer-to-peer and many-to-one. In addition, Storage Mirroring is a very cost effective disaster recovery alternative from one host to another within a LAN, storage center, or between direct attached storage in metro offices and regional centers. Additional configurations allow replication from small office environments to ensure business continuity without an outside IT staff. NOTE: StorageWorks Storage Mirroring (SWSM) is required to replicate iSCSI target LUNs on the AiO SB600c to another system. The included replication feature in Windows Storage Server 2003 R2 called DFS-R, can only be used to replicate files shares to another system. (NOTE: That system must also have DFS-R capability). For more information: http://h18000.www1.hp.com/products/storage/software/sm/index.html HP Data Protector Express optional extensions - Data Protector Express delivers class leading features and reliability without compromising its ease of use. Features such as open file backup, D2D2Any backup and recovery and bare metal disaster recovery minimize the impact of backup and recovery operations. The D2D2Any feature extends the scale and capability of the D2D backup (Virtual Library) to allow backups to be moved or copied from disk to other media such as tape for longer term retention. Agents are available for the protection of networked file servers, application servers, HP Data Protection Storage Server and Windows desktops. High performance is delivered through the Data Protector Express three-tier architecture - unique in this class of product - and self-tuning parallel backup streams that allows multiple jobs to run concurrently. The AiO SB600c Storage Blade includes the backup server LTU which enables the backup and recovery of file and iSCSI data on the SB600c and the setup and management of virtual libraries; you can consolidate the rest of your backup infrastructure and add advanced functionality by including any of the optional extensions such as D2D2Any, bare metal recovery, or network agents DA - 12789 North America Version 6 March 6, 2009 Page 6

for backup of data stored locally on other servers. For more information on Data Protector Express visit: http://www.hp.com/go/dataprotectorexpress Click on the QuickSpec link for information on SKU's, options, and functional extensions. HP StorageWorks File Migration Agent - HP FMA is an automated solution designed to help simplify Windows-based file, web, and application server administration in small business to enterprise environments. This is accomplished through policy-based file migration and archive to popular storage targets, including HP StorageWorks Reference Information Storage System (RISS), HP StorageWorks File System Extender, and NAS, via Common Internet File System (CIFS). The following Windows Storage Server features or add-ons are currently NOT supported by HP File Archiving software: NOTE: Single Instance Storage (SIS) - (NOT SUPPORTED) NOTE: DFS-Replication (DFS-R) - (NOT SUPPORTED) NOTE: File Server Resource Manager (FSRM) - Content Filter, & File Screening - (NOT SUPPORTED) For more information: http://h18006.www1.hp.com/products/storage/software/fma/ HP Systems Insight Manager - HP SIM 5.x is the first unified server and storage management platform. Now, from a single management console, administrators can manage their complete HP server and storage environment with a feature rich, extensible and secure management tool set. HP SIM also serves as a central access point for ProLiant Essentials, Integrity Essentials, and Storage Essentials software options that deliver targeted functionality for these platforms. For more information: http://h18013.www1.hp.com/products/servers/management/hpsim/index.html Insight Management Agents - Allow all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers. HP Storage Essentials NAS Manager - Provides comprehensive Network Attached Storage (NAS) management capabilities for HP All-in-One Storage Systems. Visualize your distributed HP All-inOne Storage Systems and centrally manage their capacity, performance, events, and dependencies to ensure availability and performance and unify SAN and NAS management. For more information on the complete line of HP Storage Essential products go to: http://www.hp.com/go/storageessentials

Page 7

Service and Support, HP Care Pack, and Warranty Information
HP Care Pack Services offer upgraded service levels to extend and expand your standard product warranty with easy to buy, easy to use support packages that help you make the most of your hardware and software investments. They let you choose the support levels that meet your business requirements. They help you contain total cost of ownership. HP Care Pack warranty extensions can be purchased along with HP products to cost-effectively upgrade or extend your warranty. For most HP products, including the AiO SB600c, post-warranty HP Care Pack Services are available when your original warranty has expired.
Why purchase an HP Care Pack service?
Your standard warranty protects against product defects during normal working hours. HP Care Pack Services help you extend this protection to more coverage hours and more days per week. This can increase uptime which can improve your productivity and profitability. These convenient service packages: Protect your investment in HP products Provide consistent, predictable levels of support across your entire department or business Ease budget planning with fixed-cost support that includes parts and labor Give you direct access to proven technical and problem-solving expertise Offer a choice of response-time and repair-time commitments Deliver prompt, measurable results Are available whenever and wherever you do business HP Care Pack availability may vary by country and product. The breadth, depth, and quality of HP hardware and software support services can help you improve the performance of your IT support processes and resolve the complex software and hardware problems that tax user productivity. HP Care Pack services help you increase IT environment stability, efficiency, and agility from the desktop to the data center, and improve the productivity of your employees. HP offers an optional migration service to assist the customer in moving to the newest product release. This may be in the form of a defined kit and service, or may alternatively be performed on a time & material basis. HP Services allows the customer to leverage HP's experience in selecting and configuring the most widely used security features, and provides an environment that is immediately more available due to increased change control and significantly improved data security. For more information on these and other service options, please contact any of our worldwide sales offices or visit our web site at: http://www.hp.com/hps/support

Page 9

Support Plus 24 CarePack
HP Support Plus 24 provides all the benefits of the regular Support Plus Care Pack, but HP Services engineers are available to work with your IT team to deliver onsite hardware support and over-the-phone software support around-the-clock 365 days per year. Three years of HP Support Plus 24 x 7 Improve coverage hours from 9x5 to 24x7 Improve HW response time from warranty of next business day to 4hrs same day Extend coverage from 1 year to 3 years Includes both AiO hardware and software Improve the productivity of system managers and operators Improve system performance and reduce downtime due to software defects Expedite problem resolution through expert-level technical resources Enjoy consistent service coverage across geographically dispersed sites Access to patches for HP and selected third-party software and firmware In short you enjoy all the benefits of HP Support Plus at any time or on any day you may need them. Choose Support Plus 24 when you not only need all of the benefits of Support Plus, but also require responsive hardware and software services available anytime.

Support Plus CarePack

HP Support Plus helps you increase the performance and availability of your IT infrastructure with comprehensive, consistent hardware and software services. HP Services engineers deliver onsite hardware support and over-the-phone software support 13 hours per day, 5 days per week. Three years of HP Support Plus 13x5 Extend basic coverage from 1 year to 3 years Improve HW response time from warranty of next business day to 4hrs same day Improve coverage hours from 9x5 to 13x5 (due to improved response time) Includes both AiO hardware and software Improve the productivity of system managers and operators Improve system performance and reduce downtime due to software defects Expedite problem resolution through expert-level technical resources Enjoy consistent service coverage across geographically dispersed sites Access to patches for HP and selected third-party software and firmware Our Service coverage encompasses the HP AiO SB600c product, selected multi-vendor hardware and provides trouble-shooting software problems which in turn range from the Windows Storage Server 2003 operating system up to the available utilities. And Support Plus provides recovery and re-configuration assistance of the base HP AiO SB600c using the Quick Recovery disk and your saved configuration file (application recovery not included). Choose Support Plus when you need to: Improve uptime with responsive hardware and software services. Enjoy consistent service coverage across geographically dispersed sites. Update HP and selected third-party software with tested and certified patches.

Step 1 - Order the HP StorageWorks All-in-One SB600c Storage Blade for your BladeSystem c-Class enclosure.
NOTE: The AiO SB600c Storage Blade consists of two BladeSystem c-Class components, a server blade and a storage blade. (1) Quad-core Intel Xeon Processor E5410 (2.33 GHz, 1333 FSB, 80w) HP StorageWorks Processor AiO SB600c 1.16TB 2x4 MB Level 2 cache Cache Memory Storage Blade 2 GB (2 x 1 GB) PC2-5300, FBD DDR2-667 Memory AG780B Windows Storage Server 2003 Release 2, Standard Edition pre-installed Operating System Smart Array E200i Controller with 128MB BBWC - in server blade Storage Controller #OD1 -Factory Integration Smart Array P400 RAID controller with 256MB cache, supports RAID into c-class enclosure 0/1/5/6 (ADG) - in storage blade 2 x 146GB 3G SAS 10K SFF SP HDDs - in server bladeTo choose the Hard Drives type and quantity of SFF hot plug drives to be pre-installed in the SB40c, see Step 2 below. Two (2) embedded NC373i Multifunction Gigabit NICs plus one (1) Network Controller additional 10/100 NIC dedicated to iLO 2 Management Half-height c-Class Form Factor SMB/CIFS, NFS, NCP, AppleTalk, HTTP, FTP Protocol Support Compliant with iSCSI industry standards and compatible with industry iSCSI Initiator Support standard iSCSI initiators. Interoperability has been verified for Windows 2000, Windows Server 2003, VMWare ESX Server 3, SUSE Linux Enterprise Server 10, Red Hat Enterprise Linux 5, and Qlogic 4050c.
Step 2 - Add up to 6 drives to the SB40c
Hard drives Choose the type and quantity of SFF hot plug drives to be pre-installed in the SB40c (see Step 2 below). Choose up to six Small Form Factor (SFF) hot plug drives: 146GB 10K SAS hot plug hard drives 418367-B21 300GB 10K 3G SAS hot plug hard drives 492620-B21 250GB 5.4k SATA hot plug hard drives 460355-B21 NOTE: RAID-0 requires at least 1 disk but does not afford any type of data protection. RAID-1 requires an least 2 disks and also an even number of disks. RAID-5 requires at least 3 disks. RAID-6 requires at least 4 disks. A RAID set cannot span different types of disks (e.g. you must us all SATA or all SAS for a RAID set).

Page 12

Step 3 - Add a second processor
Processor Quad-core Intel Xeon Processor ZE5410 (2.33 GHz, 1333 FSB, 80w) 459493-B21

Step 4 - Add additional memory
Additional Memory NOTE: Every AiO SB600c Storage Blade comes standard with 2 GB of memory and is expandable to OS limit of 4 GB. Memory must be installed in pairs. 1 GB FBD PC2-x 512 MB Kit 2 GB FBD PC2-x 1 GB Kit

397409-B21 397411-B21

Step 5 - Add optional software
Data Protector Express extensions NOTE: All AiO SB600c Storage Blades ship with a HP StorageWorks Data Protector Express Backup server LTU. No functional extensions are required to backup file or iSCSI block data but the following extensions can be added for advanced functionality.(NOTE: This is the backup server LTU component of Data Protector Express and does not include any add-on licenses NOTE: for features such as Bare Metal Recovery or Disk-to-Disk-to-Any functionality) For more information on HP Data Protector Express please visit: http://www.hp.com/go/dataprotectorexpress. HP Data Protector Express 4.0 Backup Server Optional extensions HP Data Protector Express Backup Server 4.0 Upgrade from Data Protector Express Single Server Edition

BB117BA BB117BT

Storage Mirroring replication software T5446A HP StorageWorks Storage Mirroring software enables remote replication over an IP LAN/WAN between multiple All-in-One Storage Systems for both file (NAS) and block (iSCSI) data. Key features include asynchronous replication that can be scheduled to a fine granular level, Logical Unit Number (LUN), file or byte level. Other features include multiple replication configuration options including peer-to-peer and many-to-one. In addition, Storage Mirroring is a very cost effective disaster recovery alternative from one host to another within a LAN, storage center, or between direct attached storage in metro offices and regional centers. Additional configurations allow replication from small office environments to ensure business continuity without an outside IT staff.

Page 13

Step 6 - Add tape backup solution
NOTE: Connecting a FC-Based tape library to the AiO SB600c Storage Blade is only one method to back up the data. Other methods are available using an iSCSI or network connection. For more information look at the Whitepapers available at: http://www.hp.com/go/AiOstorage NOTE: For more information on the complete HP StorageWorks tape backup portfolio, please visit: http://www.hp.com/go/tape. For an up-to-date listing of the latest O/S and software support details for HP Ultrium tape drives, please visit: http://www.hp.com/go/connect. Please consult the EBS connectivity matrix at: http://www.hp.com/go/ebs for detailed connectivity information. Tape Libraries HP StorageWorks MSL2024 Tape Library HP StorageWorks MSLUltrium 960 4GB FC Library AG326B HP StorageWorks MSL4048 Tape Library HP StorageWorks MSLUltrium 960 4GB FC Library AG324B HP StorageWorks MSLUltrium 960 4GB FC Library AG325B

Step 7 - Add HP CarePack services
AiO SB600c CarePacks HP 1y Support Plus AiO 600c SVC HP 1y Support Plus24 AiO 600c SVC HP 1y 6h 24x7 CTR AiO 600c HW Supp HP 3y Support Plus AiO 600c SVC HP 3y Support Plus24 AiO 600c SVC HP 3y 6h 24x7 CTR AiO 600c HW Supp HP 1y PW Support Plus AiO 600c SVC HP 1y PW Support Plus24 AiO 600c SVC HP Installation UE981E UE982E UE983E UE984E UE985E UE986E UE987PE UE988PE UF285E

Memory

NOTE: Memory configurations listed do not apply to "Factory Integrated Models". DIMM installation guidelines: All DIMMs must be PC2-5300 Fully Buffered DIMMs at 667 MHz. Both DIMM slots in a memory bank must be populated. Banks must be populated in sequential alphabetic order, starting with bank A. Both DIMMs in a memory bank must be identical. Install identical DIMMs as pairs only, starting with DIMM socket 1, bank A. Multiple advanced memory protection (AMP) modes are supported, based on FBDIMM population and RBSU selection. The server blade defaults to Advanced ECC AiO600c Storage Standard Memory 2048 MB (2 x 1024 MB) (depending on model)of PC2-5300, FBD DDR2-667 ECC DIMMs Standard Memory Plus Optional Memory Up to 4096 MB of PC2-5300, FBD DDR2-667 ECC DIMMs. Memory is available with the installation of optional PC2-5300, FBD DDR2-667 DIMM memory expansion kits. OS limit of 4 GB. DA - 12789 North America Version 6 March 6, 2009 Page 14 1. 2. 3. 4. 5.
Memory Standard Optional 2048 MB 4096 MB 1A 1024 MB 1024 MB 2C Empty 1024 MB 3A 1024 MB 1024 MB
Slot 4C 5B Empty Empty Empty 1024 MB

6D Empty Empty

7B Empty Empty

8D Empty Empty

Page 15
Additional Specifications
AiO SB600c Server Blade Dimensions
Weight Range* Temperature Range
Humidity** Relative Humidity
Height Depth Width Maximum Operating Non-Operating Storage Maximum Wet Bulb Temperature Operating
2.207 in (5.61 cm) 20.058 in (50.95 cm) 7.154 in (18.17 cm) 14.20 lb (6.44kg) 10Cto 35 C (50 to 95 F) -40 to 60 C (-40 to 140 F) -20 to 60 C (-4 to 140 F) -30 C (86 F) 10% to 90%
Shipping 10% to 90% Storage 10% to 95% * All temperature ratings shown are for sea level. An altitude derating of 1C per 304.8 m (1.8F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3 KPa/4.4 psia. ** Storage maximum humidity of 95% is based on a maximum temperature of 45C (113F). Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
HP Smart Array E200i Controller

Disk Drive and Enclosure 3G SAS (Serial Attached SCSI) Interface 1.5G SATA (Serial Advanced Technology Attachment) 2 internal (SFF8484) x4 wide port connectors SAS Connectors DDR-1/266 MHz provides up to 4.2 GB/s maximum bandwidth. Cache Memory Speed x4 2.5G PCIe provides 2GB/s maximum bandwidth. Server Interface x8 3G SAS provides 2.4GB/s maximum bandwidth. SAS Speed 40-bit 64MB or 128MB cache: ECC protection, battery-backed, and Cache Memory transportable Host Memory Addressing 64-bit, supporting greater than 4GB server memory space RAID 5 (Distributed Data Guarding) requires 128MB BBWC option RAID Support RAID1, 1+0 (Striping & Mirroring) RAID 0 (Striping) Upgradeable Firmware Upgradeable Firmware

Page 16

Embedded NC373i Multifunction Gigabit Server Adapter Network Processor Data Transfer Method Network Transfer Rate IEEE Compliance Standard Features
Broadcom 5708S Four lane (x4) PCI Express 1000 Mb/s 802.1p, 802.1Q, 802.3, 802.3ad, and 802.3x TCP/IP offload engine (TOE) for MS Windows Remote direct memory access (RDMA) for MS Windows via the optional HP ProLiant Essentials RDMA Pack Accelerated iSCSI for MS Windows via the optional HP ProLiant Essentials Accelerated iSCSI Pack - NOTE: Accelerated iSCSI is NOT supported at this time on the AiO SB600c Storage Blade Jumbo frames TCP/IP checksum offload (TCO) Large send offload (LSO) Interrupt coalescence Dual address cycles (DAC) Wake-on-LAN (WOL) Pre-boot execution environment (PXE) ProLiant Teaming including Network Fault Tolerance, Transmit Load Balancing, and Switch-Assisted Load Balancing Advanced teaming and Virus Throttle via the optional HP ProLiant Essentials Intelligent Networking Pack
AiO SB600c Server Blade Dimensions (HxWxD) Weight (unloaded) Weight (loaded) Protocol Support
2.19 x 7.154 x 20.058 in (5.56 x 18.17 x 50.95 cm) 8 lb (3.63 kg) 11 lb (4.99 kg) 3Gb/s SAS 1.5Gb/s SATA UID LED Indicators System Health LED Drive LED Indicators (on Drive LED (top) - On-line/Activity drive trays) Drive Failure LED (bottom) - Drive Fault/Locate Operating 10% to 90% Relative Humidity (non-condensing) Shipping 5% to 95% Operating 50 to 94 F (10 to 35 C) Temperature Range Shipping -22 to 140 F (-30 to 60 C) NOTE: To maintain proper cooling and airflow, a drive blank or drive must occupy all bays during operation.

Page 17

Smart Array P400 Controller
Disk Drive and Enclosure 3G SAS (Serial Attached SCSI) Interface 1.5G SATA (Serial Advanced Technology Attachment) 2 internal (SFF8484) x4 wide port connectors SAS Connectors DDR2-533MHz with provides up to 4.2 GB/s maximum bandwidth. Cache Memory Speed x8 3G SAS provides 2.4GB/s maximum bandwidth. SAS Speed 40-bit 256MB cache; ECC protection, battery-backed, and transportable Cache Memory Logical Drives Supported Up to 32 logical drives Maximum Logical Drive 876GB (6 x 146GB) Capacity Host Memory Addressing 64-bit, supporting greater than 4GB server memory space RAID 6 with ADG (Advanced Data Guarding) RAID Support RAID 5 (Distributed Data Guarding) RAID 1+0 (Striping & Mirroring) RAID 0 (Striping) Upgradeable Firmware with recovery ROM feature

Upgradeable Firmware

Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.

Page 18