HP DAT 72 tape storage for NonStop S-series servers

Data sheet

DAT 72 tape drives utilize Digital Data Storage (DDS) technology, which provides capacity, reliability, and low cost, resulting in excellent media investment protection and remarkably low cost of ownership.
HP announces the availability of HP StorageWorks DAT 72 tape drives for use with HP NonStop S-series servers. HP StorageWorks DAT 72 tape drives are based on the Digital Data Storage (DDS) format, the most successful tape backup format of all time, with an installed based of more than 9 million drives. DDS technology has led the tape market for so many years because of its capacity, reliability, and low cost. DAT 72 tape drives for NonStop servers have backward compatibility with two previous DDS generations, providing excellent media investment protection. The low cost of DDS media contributes to DATs extraordinarily low cost of ownership.
Key features and benefits
Utilizes the successful and popular DDS technology Provides extraordinarily low cost of ownership Provides backward compatibility with previous DDS generations Offers a uniquely enhanced and expanded user interface that makes operations easier

Whats new

The HP StorageWorks DAT 72 tape drive is now available in three configurations for use with NonStop S-series servers. These include a single cartridge manual-load tape drive and a model equipped with a six-media cartridge automatic cartridge loader (ACL), both designed for table-top use. Additionally, a NEBS-compliant version suitable for use in telco central office applications is also available. The telco package is a two-tape drive unit. Each unit is a single cartridge manual-load tape drive, housed in a 19-inch rack-mount package that also includes a 48-volt power supply. Complete ordering information for all three models is provided below. The DAT 72 tape drives have added value in the form of an enhanced and expanded user interface. The interface provides valuable information essential to effective use and maintenance of the DAT 72 tape drive. Information available at the push of a front-panel button includes drive identification, firmware revision level, transfer rate, current operational mode, compression on/off, compression ratio, remaining cartridge capacity, and other information. Making this information easily available ensures NonStop server tape operations run more efficiently and with reduced operator error. The DAT 72 tape drive products provide a replacement path for the 5142ACL DDS-3 DAT tape drive, which was discontinued from sales at the end of 2003, as well as other DDS-3 tape drives for NonStop systems. Customers that choose to replace their 5142ACL tape drive or add to their capacity by purchasing the new DAT 72 drives should know that the DAT 72 product is capable of reading and writing in a format useable by the DDS-3 tape drives; however, a specific process must be followed in order to achieve that compatibility. Tapes written by the DAT 72 product in the default configuration are not readable by earlier generations of DAT tape drives. A tape migration strategy and plan is required for customers in a mixed-DDS tape media environment.

Benefits of StorageWorks DAT 72 tape drive products
The StorageWorks DAT 72 products provide Native cartridge capacity of 36 gigabytes at up to a 3-megabyte-per-second transfer rate Up to 2:1 compression, with a potential for up to 72 gigabytes per cartridge and a 6-megabyte-per-second transfer rate Unique user interface on the DAT 72 tape drives that make operations easier

Technical specifications

System requirements Hardware Software Any NonStop S-series server SCSI port HP NonStop Kernel operating system, Release Version Update (RVU) G06.23 and later or RVU G06.10 and later with Open System Management (OSM) and OSM prerequisite SPRs as follows: OSM Prerequisite SPRs RVU G06.10 T1089ABK (SP) T9753AFC (I/O drivers; requires system load) RVU G06.11G06.20 RVU G06.21 and later OSM SPRs T2723AAB (OSM connection library) T2724AAB (OSM provider interface library) T2725AAB (OSM configuration) T2726AAB (OSM XML API) T2727AAB (OSM CIMOM) T2728AAB (OSM service provider) T2730AAB (OSM event viewer) T2751AAB (OSM Web-based suite) T1089ABK No additional SPRs required for OSM

Ordering information

Product ID 5242 5242ACL 5242-2SE 514M Controller hardware options Any NonStop S-series PMF CRU SCSI port and 6762 SCSI cablescopper 519-001W 519-003W SCSI cable, 1 m (3.3 ft) SCSI cable, 3 m (9.8 ft) IOMF2 SCSI port ServerNet/DA with SCSI PIC Description HP DAT 72, single-cartridge table-top tape drive HP DAT 72 tape drive with 6-media slot ACL HP DAT 72 2-tape drive unit, NEBS compliant, 19-in. rack mountable Media magazine for ACL-equipped DAT tape drives
519-010K 519-015W 519-020W 519-023W
SCSI cable, 10 m (32.8 ft) SCSI cable, 15 m (49.2 ft) SCSI cable, 20 m (65.6 ft) SCSI cable, 23 m (75.4 ft)
SCSI extenders for long-distance attachment DAT 72 tape drives for NonStop servers can be attached at distances beyond copper SCSI limitations through the use of the SCSI extender products listed below. The two types of SCSI extenders are used in series along with a customer-supplied single-mode fiber cable. The connection using SCSI extenders is described as follows: Host 519-0x cable CTSFE single-mode fiber cable CTFSE 519-0x cable Super DLT tape drive CTSFE CTFSE SCSI extender, host side SCSI extender, device side half-height NonStop S-series enclosure, (optional) half-height NonStop S-series enclosure add-on (optional)
Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
For more information, go to www.hp.com/go/nonstop.

04/2004

Product environmental attributes - IT Eco Declaration 2004
Brand Manufacturer Manufacturers representative Contact person Postal address Postal code /City/ Country Telephone (incl. country code) Mobile phone (incl. country code) Fax (incl. country code) Internet site Additional information Hewlett-Packard Hewlett-Packard Name: e-mail: Name: e-mail: itecodeclaration.ww@hp.com Hans Wendschlag , HP Sweden Logo
+ + + http://www.hp.se/environment Latest version of this document can be found at: www.hp.se/itecodeclarations. The company environmental profile, which is issued for the company and isn't product related, can also be found at the same website. Check Item 14 for explanatory information regarding specific item responses.
This declaration covers the below listed Information Technology product categories* with specified product identity (ID) such as type/model number.
Computer system unit CPU Display/ monitor Printer Black/white Product identity Mobile/portable computer Keyboard Server Digital Projector Camera
Copier Fax Multifunction product Scanner Other IT product, specify: Tape Drive Storage Device (Digital Audio Tape DAT 72) Colour Pages per minute: HP StorageWorks SCSI DAT72 External Tape Drive Q1523X/DW010X (where X can be any alpha numeric combination) st Issue date 1 November 2005 Guideline document June 05 (Version of Guideline document used for completion of this declaration (month, year)) This IT Eco Declaration consists of three documents: Company environmental profile: Product environmental attributes: Divided into two sections, legal and market requirements Divided into two sections, legal and market requirements
Guideline document with extensive clarifications, comments and references.
The latest version of all these documents can be downloaded from: www.itecodeclaration.org
Notes: Voluntary vs compulsory requirements: Items marked V are voluntary to answer, all other items must be answered. The latest version of the Guideline document must be used. Specify in table above according to which version of the guideline
document this declaration has been completed.
This version of the IT Eco Declaration is adjusted to the document Product-related Environmental Attributes, issued by the European
Association for Standardizing Information and Communication Systems (ECMA), TR/70, version 1999.
This version of the IT Eco Declaration meets the basic principles of ISO14021:1999, Environmental labels and declarations Self-
declared environmental claims (Type II environmental labelling).
When references are given to standards like ISO, IEC and EN, the latest version should always be referred to.
For telecommunication products, use eco declaration for telecommunication products.
This IT Eco Declaration version can be used from October and shall be used for products announced after December 1 2003.
The IT Eco Declaration is a system for declaration of environmental aspects of IT and telecom products, developed by the Nordic IT organisations, IT-Fretagen in Sweden, ITB in Denmark, IKT-Norge in Norway and TTK ry in Finland. This IT Eco Declaration may only be used after having signed a contract with at least one of these organisations.
Association of the Swedish IT and Telecom Industry www.itforetagen.se
Norwegian IT-companies Organisation www.ikt-norge.no
IT-Brancheforeningen Kontor & Data www.itb.dk
Finnish Association of Office Technology Traders www.ttkry.com

Version June 2004

Page 1 (4)
Copyright Association of the Swedish IT and Telecom Industry 2000. Reproduction of this form without permission is prohibited by the copyright law 1960:729. The prohibition includes any kind of reproduction, by electronic or any other means.
Product identity Issue date
HP StorageWorks SCSI DAT72 External Tape Drive Q1523X/DW010X ( where X can be any alpha numeric combination) 11-01-2005 Logo
Product environmental attributes - Legal requirements
Item P1 P1.1 P1.2 P1.3 P1.4 P1.5 Additional information regarding each item may be found under P14. Environmental conscious design Product parts are free from, i.e. less than 0.1% by weight (b.w.), CFCs & HCFCs, asbestos, PCB & PCT (3093/94/EEC, 76/769/EEC, 6th amendment, 99/77/EEC, 82/828/EEC) Components are free from, i.e. less than 0.1% b.w., mercury (Hg), except for small amounts of mercury which are allowed in light sources. (SE SFS 1998:944) Cadmium (Cd) content of colorants, stabilizers, and surface treatments does not exceed, 0.01% b.w., as specified in 76/769/EEC, 10th amendment, 1991/338/EEC. Paints are free from lead (Pb), i.e. less than 0.1% b.w., (76/769/EEC, 8th amendment, 89/677/EEC) Paints, coatings, plastics, rubbers and seals are free from flame retardants and/or plasticizers containing Short Chain Chlorinated Paraffines (SCCPs) with more than 0,1% by weight, 10-13 carbon atoms, minimum 48% chlorine by weight, CAS number 63449-39-8 (NO MVD regulation 1544, 2000.12.13 and FI 416/2003). If the product is intended for direct and prolonged skin contact, the surfaces do not release nickel (Ni) above levels specified in (76/769/EEC, 8th amendment, 94/27/EEC) Batteries If hazardous batteries are used in the product, they are labelled. (93/86/EEC). If batteries are used in the product they are free (<0.0005% by weight) from mercury (Hg) (98/101/EC) Electrical safety, EMC and connection to the telephone network The product meets the Low Voltage Directive (LVD) regarding electrical safety (73/23/EEC & 93/68/EEC) The product meets the EMC Directive regarding electromagnetic compatibility (89/336/EEC) If product is intended for connection to a public telecom network or contains a radio transmitter, it meets the EU R&TTE Directive (1999/5/EC) The product is CE-marked (93/68/EEC) Consumable materials If a photo conductor (drum, belt etc.) is used in the product, it is free (<0.01% by mass) from cadmium (Cd) (76/769/EEC and 91/338/EEC) If an ink is used in the product, it is free (<0.01% by mass) from cadmium (Cd) (91/338/EEC) If toner/ink (or corresponding) are used in the product, they are classified and if required labelled in accordance with EU directives Packaging materials The sum of the concentration levels of lead, cadmium, mercury, and hexavalent chromium present in packaging or packaging components does not exceed 0.01% by weight (100 ppm). (94/62/EC). The product packaging material is free from CFC/HCFC.

Requirement met Yes No n.a.
P1.6 P2 P2.1 P2.2 P3 P3.1 P3.2 P3.3 P3.4 P4 P4.1 P4.2 P4.3 P5 P5.1 P5.2
This product meets above listed legal requirements

Page 2 (4)

Product Identity Issue date
Product environmental attributes - Market requirements
Item P6 V = Voluntary to answer. Additional information regarding each item may be found under P14. Environmental conscious design Disassembly, recycling P6.1 Gluing/welding of different material has been avoided. P6.2 P6.3 P6.4 P6.6 P6.7 P6.8 P6.9 Plastic materials in covers/housing are free from surface coating. Mechanical plastic parts >100g, consist of one material or of easily separable materials. Plastic parts >25g, have material codes according to ISO 11469. If labels are required they should be separable. (This requirement does not apply to safety labels). Product lifetime Upgrading of the product can be done with commonly available tools Processor, memory and cards of various types can be changed/upgraded. Hard disk, CD/DVD drives and / or floppy drive can be changed/upgraded.
P6.5 V Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools.
P6.10 V Spare parts are available after end of production for: P6.11 Material requirements Plastic parts >25g are free from PBB/PBDE, i.e less than 0.1% b.w.

5 years

P6.12 V Plastic parts >25g are free from flame retardant substances/preparations above 0.1% classified as R45/46, R50/51/52/53 and R60/61 (67/548/EEC) P6.13 Chemical specification of flame retardants in plastic parts >25g according to ISO 1043-4 declared below: Product cover/ housing: TPP (FR(40)) Printed circuit boards: TBBPA (FR(16)) V Other plastic parts: P6.14 P6.15 P6.16 V P6.17 V P6.18 V P7 P7.1 P7.2 V P8 P8.1 V Product cover/housing material type, specified according to ISO 1043-1 Material type ABS+PC Material type Electrical cable insulation material specification Light sources are free from mercury, i.e less than 0.1% b.w. If mercury is used specify: Number of lamps & max. mercury per lamp Mechanical plastic parts > 25g are free from lead (Pb), i.e. less than 0.1% b.w. Batteries Product is free from batteries defined as hazardous (91/157/EEC) Batteries are used that meet the European eco-label (EU Flower) criteria (2001/687/EC & 2001/686/EC) Energy consumption n.a. Maximum power 46.7 W V Operation 29.0 W Low power mode 23.2 W Off mode W Sleep mode W Deep sleep mode W If the product is in Stand by mode, it reverts to: Low power mode in min Sleep mode in min Deep sleep mode in min V Off mode in min 2-sided printing/copying (duplex) from 1-sided originals is an integrated product function. n.a. Material type PVC mg

Product parts are free from beryllium (Be) and beryllium oxide (BeO), i.e. less than 0.1% b.w.

V P8.2 P8.3

Information about the energy save function is given in the user documentation. (Not applicable when no instruction is needed to operate the energy save function, i.e. the energy save function cannot be adjusted or inhibited by the user.) P8.4 The product meets the requirements of ENERGY STAR. P8.5 V The product meets the requirements of GEEA. P8.6 V Display meets the energy save requirements of the European eco-label (EU Flower) (2001/686/EC & 2001/687/EC). V Desktop or portable computer meets the energy save requirements of the European eco-label (EU Flower) (2001/686/EC & 2001/687/EC)

Page 3 (4)

Product environmental attributes - Market requirements (continued)
Item P9 P9.1 P9.2 V V = Voluntary to answer. Additional information regarding each item may be found under P14. Noise characteristics (Measured and declared according to ISO 7779 and ISO 9296) Declared A-Weighted Sound Power Level, LWAd (1B = 10 dB) Operating mode: LWAd : 5.38 B Idling mode: LWAd : 5.36 B The product meets the acoustic noise requirement of:
TCO Blue Angel European eco-label (EU Flower) Nordic Swan
P9.3 V Declared A-Weighted Sound Pressure Level, LpAm (measured at the operator position if applicable; otherwise measured at the 1m bystander positions). Operating mode: LpAm: 37.2 dB Idling mode: LpAm: 37.1 dB Test position: LpAm: Operator position Bystander positions
Test position for PC tower LpAm:
Table top Floor standing P10 Emissions P10.1 , other standard , specify:
Chemical emission test performed according to RAL-UZ The test covers: Dust
Ozone Styrene TVOC Benzene P10.2 V The product meets the requirement for chemical emission in: TCO Blue Angel Nordic Swan P10.3 Display/monitor/portable computer meets the requirement for low frequency electromagnetic fields in: MPR-II TCO prEN50279- A , -B , -C Consumable materials The photo conductor is free from selenium. If the photo conductor contains selenium there is a system for waste recovery.

P11 P11.1 P11.2

P11.3 V Safety Data Sheet/Material Safety Data Sheet (SDS/MSDS) is available for toner/ink (99/45/EC & 2001/58/EC) P11.4 V Paper containing recycled fibres and meeting requirements of ENV12281 can be used in the product. P12 P12.1 P12.2 P12.3 P13 P13.1 Ergonomics The computer system meets the ergonomic requirements of EN 29241-3, -7, -8 for CRT displays and EN-ISO 13406-2 for flat panel displays. The product keyboard meets the requirements of ISO 9995 and EN 29241-4. The computer input device meets the requirements of ISO 9241-9. Packaging and documentation Product packaging: material type(s): Cardboard weight (kg): 0.372 0.068 0.028

P13.2 V

Polyethylene LD Polyethylene bag Plastic packaging material is marked according to DIN 6120, ISO 11469 or ISO 1043, 1-4.
P13.3 V Product plastic packaging is free from chlorine P13.4 V User and product documentation are free from chlorine bleached paper P14 Additional information "The IT Eco Declaration covers the product base model only. If optional items with moving parts are added, like extra hard disks or graphic cards with fans etc, these can change energy and acoustics values for which HP can take no responsibility."

Page 4 (4)