Document Conventions

This manual uses the following standard set of typographical conventions to introduce new terms, illustrate screen displays, describe command syntax, and so forth.
Convention italics boldface Meaning
Within text, new terms and emphasized words appear in italic typeface. Within text, commands, keywords, identifiers (names of classes, objects, constants, events, functions, program variables), environment variables, filenames, Graphical User Interface (GUI) controls, and other similar terms appear in bold typeface. Information displayed on your terminal screen and information that you are instructed to enter appear in Courier font. Keys that you are to press appear in uppercase letters in Helvetica font. Within syntax descriptions, values that you specify appear in angle brackets. For example: interface <ipaddress> Within syntax descriptions, optional keywords or variables appear in brackets. For example: ntp peer <addr> [version <number>] Within syntax descriptions, required keywords or variables appear in braces. For example: {delete <filename> | upload <filename>} Within syntax descriptions, the pipe symbol represents a choice to select one keyword or variable to the left or right of the symbol. (The keyword or variable can be either optional or required.) For example: {delete <filename> | upload <filename>}

Courier

KEYSTROKE <>
Hardware and Software Dependencies
The following table summarizes the hardware, software, and operating system requirements for the EFS WAN Accelerator Manager.
Hardware Requirements Any computer that supports a Web browser with color image display. Software and Operating System Requirements The EFS WAN Accelerator Manager has been tested with Mozilla 1.2.1 and Microsoft Internet Explorer 6.0x. NOTE: Javascript and cookies must be enabled in your browser. NOTE: If you want to encrypt your communication, you must have a Secure Sockets Layer (SSL) capable browser. No particular operating system is required.

Additional Resources

This section describes the following resources that supplement the information in this guide:
Related HP documentation Online documentation Related technical reference books

Related HP Documentation

You can access the complete document set for the HP system from the HP StorageWorks EFS WAN Accelerator Documentation Set CD-ROM: HP StorageWorks Enterprise File Services WAN Accelerator Installation and Configuration Guide describes how to install and configure the HP EFS WAN Accelerator. HP StorageWorks Enterprise File Services WAN Accelerator Management Console Users Guide describes how to use the Mangement Console to configure and manage the HP EFS WAN Accelerator. HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide describes how to deploy the HP EFS WAN Accelerator in complex network environments (for example, environments using Web Cache Communication Protocol (WCCP), Policy Based Routing (PBR), and Layer-4 switches). HP StorageWorks Enterprise File Services WAN Accelerator Command-Line Interface Reference Manual is a reference manual for the HP EFS WAN Accelerator command-line interface for the HP EFS WAN Accelerator. It lists commands, syntax, parameters, and example usage. HP StorageWorks Enterprise File Services Remote Copy Utility Reference Manual describes how to install and deploy the HP EFS Remote Copy Utility (HP EFS RCU). The HP EFS RCU is an optional utility of the HP EFS WAN Accelerator that copies, mirrors, and transparently prepopulates data. You can download the HP EFS RCU from the HP support site located at http://www.hp.com. HP StorageWorks Enterprise File Services N4c WAN Accelerator 4-port NIC Installation Guide describes how to install the bypass cards in the HP EFS WAN Accelerator.

5. Click Apply to Working to apply these settings to the specified working profile. When you apply page settings, the values are applied to the running configuration but not saved permanently. The Save Configuration icon displays a flashing orange arrow to remind you to save your configuration. 6. To save the settings permanently, click Save. To revert to the running configuration, click Reset.

Setting In-Path Rules

This topic describes how to set in-path configuration rules for a common profile. An in-path rule defines the policies for intercepting traffic for optimization.

To set in-path rules

1. Click the Setup Appliances tab to expand the Setup Appliances menu. 2. Click Common Profiles in the left menu to expand the Common Profiles menu. 3. Click In-Path Rules in the left menu to display the Setup Appliances: Service - In-Path Rules page.
Figure 3-3. Setup Appliances: Service - In-Path Rules Page
4. Use the controls to set in-path rules for a profile, as described in the following table.
Control Settings will be applied to profile Description Select the name of the profile you want to configure from the drop-down list.

Control Add New Rule

Description Type. Select one of the following rule types from the drop-down list: Auto-Discovery. Auto-discovery rules automatically find the appliances between this appliance and the server for which the packet is destined. By default, the appliance automatically intercepts and optimizes traffic on all IP addresses (0.0.0.0) and ports (all). Defining in-path rules modifies the default setting. Fixed-Target. Fixed-target rules directly specify out-of-path appliances near the target server. Determine which servers you would like a particular appliance to optimize (and, optionally, which ports), and add rules to specify the Target Appliance and a Backup Appliance IP address and port. NOTE: In an out-of-path deployment, if you want to optimize MAPI Exchange by destination port, you must define fixed-target, in-path rules that specify the following ports on the client-side HP EFS WAN Accelerator appliance: the Microsoft end-point mapper port: 135; the HP EFS WAN Accelerator appliance port for Exchange traffic: 7830; the HP EFS WAN Accelerator appliance port for Exchange Directory NSPI traffic: 7840. Pass-Through. Pass-through rules identify traffic that is passed through the network unoptimized. Discard. Packets for connections that match the rule are dropped silently. The appliance filters out traffic that matches the discard rules. Deny. When packets for connections match the deny rule, the appliance actively tries to reset the connection. Insert Rule At. Select start, end, or a rule number from the drop-down list. HP EFS WAN Accelerators evaluate rules in numerical order starting with rule 1. If the conditions set in the rule match, then the rule is applied, and the system moves on to the next packet. If the conditions set in the rule do not match, the system consults the next rule. For example, if the conditions of rule 1 do not match, rule 2 is consulted. If rule 2 matches the conditions, it is applied, and no further rules are consulted. In general, you should list rules in the following order: 1. Pass-through. List the exceptions to optimization, first. 2. Fixed-target. List any fixed-targets for optimization, next. 3. Auto-discovery. Apply the default rule: optimize all remaining traffic. (The default auto-discovery rule is listed automatically.) Source Subnet. Type the IP address for the source subnet in the Source Subnet text box. Use the following format: 0.0.0.0/0. Destination Subnet. Type the IP address for the destination subnet in the text box. Use the following format: 0.0.0.0/0. Port. Type the destination port number, port label, or all in the text box. For information about defining port labels, see Setting Up Monitored Ports on page 131. Add Rule. Click this button to add the rule to the list of rules for the profile. Remove Selected Rules. To remove a rule from the Rules list, click the check box next to the and entry and click Remove Selected Rules.

Creating Groups

This topic describes how to create HP EFS WAN Accelerator groups. You should consider creating many, modular groups to facilitate mass configuration (configuration push) and aggregated reporting. For example, you might want to create two categories of groups: configuration groups and reporting groups. For configuration groups, you would enable autoconfiguration, configuration pushes, and backup options. An appliance can belong to more than one group. For detailed information about the relationship between profiles, groups, and appliances, see HP EFS WAN Accelerator Configuration Objects on page 19.
To create an appliance group
1. Click the Setup Appliances tab to expand the Setup Appliances menu. 2. Click Groups in the left menu to display the Setup Appliances: Appliance Groups page.
Figure 3-19. Setup HP EFS WAN Accelerator Manager: Appliance Groups Page
TIP: If the group list contains groups, click the link in the Group column to examine the group configuration and determine whether an existing group suits your needs. If so, you do not need to configure a new group. If not, continue with the procedures in this section.
3. Use the Add New Group controls to create a new group and add it to the group list, as described in the following table.
Control Name Enable auto configuration? Enable backups? Enable configuration pushes? Description Type a descriptive name for the group. Click this box to enable auto-configuration for new appliances. Click this box to enable backups. Click this box to enable remote appliances to receive automatic updates whenever their configuration is changed with the HP EFS WAN Accelerator Manager. Type a description of the group if you want the description to appear in the group list. To add the group to the group list, click Add Group. To remove group names from the list, click the check box next to the group and click Remove Selected Groups.
Comment Add Group Remove Selected Groups
Associating Profiles with Groups
This topic describes how to associate profiles with groups. You can associate more than one profile with a group. For example, you might create a configuration group for CIFS support and associate two profiles with it: a profile that defines basic settings and a profile that defines CIFS-specific settings. When you associate a profile with a group, any new appliances added to the group are configured with the profile settings.
To associate a profile with a group
1. Click the Setup Appliances tab to expand the Setup Appliances menu. 2. Click Groups in the left menu to display the Setup Appliances: Appliance Group page. 3. Click the name of the group for which you want to associate one or more profiles to display the Setup Appliances: Appliance Group: <GroupName> page.
Figure 3-20. Setup Appliances: Appliance Group <GroupName> Page
4. Use the controls to associate one or more profiles with the specified group, as described in the following table.

HP EFS WAN ACCELERATOR MANAGER USERS GUIDE 89
Setting In-Path Interfaces
This topic describes how to modify the settings for the in-path interface for a remote HP EFS WAN Accelerator. You specify the in-path interface if you plan to have the appliance in the direct path (the same subnet) as the client and the server in your network. You also set the in-path gateway (WAN router).
NOTE: If you completed the installation wizard when you initially set up the remote appliance, you already set this parameter. If you chose to complete the appliance configuration through the HP EFS WAN Accelerator Manager when you initially set up the remote appliance, you must complete the interface settings as described below to complete the remote appliance configuration.
To set the in-path interface
1. Click the Setup Appliances tab to expand the Setup Appliances menu. 2. Click Appliance Specific in the left menu to expand the Appliance Specific configuration menu. 3. Click Routing: In-Path in the left menu to display the Setup Appliances: InPath (LAN/WAN) page.
Figure 3-26. Setup Appliances: In-Path (LAN/WAN) Interface Page
4. Use the controls to complete the configuration, as described in the following table.
Control Settings will be applied to appliance Select interface IP Address Description Select the appliance for which you want to view or modify the configuration from the drop-down list. Select an in-path interface from the drop-down list, for example, inpath0_0. Get IP address automatically? Check this box to obtain the IP address from a dynamic host configuration protocol (DHCP) server. If you do not use a DHCP server to set the IP address, specify the following settings: IP Address. Type an IP address in the text box. Subnet Mask. Type a subnet mask in the text box. In-Path Gateway IP. Type in-path gateway IP address in the text box. The inpath gateway must be in the same network as the in-path interface. You must set the in-path gateway for in-path configurations. IMPORTANT: If there is a routed network on the LAN-side of the in-path appliance, the router that is the default gateway for the appliance must not have the Access Control List (ACL) configured to drop packets from the remote hosts as its source. The in-path appliance uses IP masquerading to appear as the remote server.
Control Additional Interface Settings
Description LAN Speed. Select the speed from the drop-down list to set the speed for the inpath LAN port. The default value is Auto. If your network routers or switches do not automatically negotiate the speed and duplex, you must manually set the speed and duplex for the primary interface. The speed and duplex must match (LAN and WAN) in an in-path configuration. If they do not match you might have a large number of errors on the interface when it is in bypass mode, because the switch and router are not set with the same duplex settings. Duplex. Select Auto, Full, or Half from the drop-down list to set the duplex speed for the in-path LAN port. The default value is Auto. If your network routers or switches do not automatically negotiate the speed and duplex, you must manually set the speed and duplex for the primary interface. The speed and duplex must match (LAN and WAN) in an in-path configuration. If they do not match you might have a large number of errors on the interface when it is in bypass mode, because the switch and router are not set with the same duplex settings. WAN Speed. Select the speed from the drop-down list to set the speed for the inpath WAN port. The default value is Auto. If your network routers or switches do not automatically negotiate the speed and duplex, you must manually set the speed and duplex for the primary interface. The speed and duplex must match (LAN and WAN) in an in-path configuration. If they do not match you might have a large number of errors on the interface when it is in bypass mode, because the switch and router are not set with the same duplex settings. Duplex. Select Auto, Full, or Half from the drop-down list to set the duplex speed for the in-path WAN port. The default value is Auto. If your network routers or switches do not automatically negotiate the speed and duplex, you must manually set the speed and duplex for the primary interface. The speed and duplex must match (LAN and WAN) in an in-path configuration. If they do not match you might have a large number of errors on the interface when it is in bypass mode, because the switch and router are not set with the same duplex settings. MTU. Type a Maximum Transmission Unit (MTU) value in the text box. The MTU is the largest physical packet size, measured in Bytes, that a network can transmit.

For detailed information about setting up RADIUS and TACACS+ servers, see the HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide. To prioritize authentication methods 1. Click the Setup Manager tab to expand the Setup HP EFS WAN Accelerator Manager menu. 2. Click Authentication in the left menu to display the Setup HP EFS WAN Accelerator Manager: Authentication - General Settings page.
Figure 5-15. Setup HP EFS WAN Accelerator Manager: Authentication - General Settings Page
Control Login Page Authentication Methods Description Default Login ID. Type a default login identification number (ID) in the text box. Method 1. Select Local, RADIUS, or TACACS+ from the drop-down list. Note: Make sure you put the authentication methods in the order in which you want them to occur. If authorization fails on the first method, the next method is attempted, and so forth, until all the methods have been attempted. Method 2. Select None, Local, RADIUS, or TACACS+ from the drop-down list. Method 3. Select None, Local, RADIUS, or TACACS+ from the drop-down list. Advanced Authorization Authorization Policy. Optional. Select Remote First, Remote Only, or Local Only from the drop-down list: Remote-First. If a local-user mapping attribute is returned and it is a valid local user name, map the authenticated user to the local user specified in the attribute. If the attribute is not present or not valid locally, use the user name specified by the default-user command. (This is the default behavior.) Remote-Only. Map only to a remote authenticated user if the authentication server sends a local-user mapping attribute. If the attribute does not specify a valid local user, no further mapping is attempted. Local-Only. All remote users are mapped to the user specified. Any vendor attributes received by an authentication server are ignored. Default User. Optional. Select Admin or Monitor from the drop-down list.
Setting Up RADIUS Server Authentication
This topic describes how to set up RADIUS server authentication for the HP EFS WAN Accelerator Manager. Enabling this feature is optional. RADIUS is an access control protocol that uses a challenge and response method for authenticating users. Setting up RADIUS server authentication is optional. For detailed information about setting up RADIUS and TACACS+ servers, see the HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide.

Figure 5-24. Setup HP EFS WAN Accelerator Manager: Configuration Manager Page
3. Use the controls to manage configurations, as described in the following table.
Control Save Configuration Revert Save Current Configuration As Description Click Save Configuration to save settings that have been applied to the running configuration. Click Revert to discard settings that have been applied to the running configuration but not saved. Type a name in the Name text box and click Save As to save settings that have been applied to the running configuration as a new file. The configuration name you specify does not become the active configuration. To activate an alternative configuration, select is from the Configuration list and click Activate Selected Configuration. To remove a configuration from the Configuration list, click the check box next to the entry and click Remove Selected Configuration.
Activate Selected Configuration Remove Selected Configuration
Rebooting the HP EFS WAN Accelerator Manager
This section describes how to reboot the HP EFS WAN Accelerator Manager. Rebooting the HP EFS WAN Accelerator Manager disrupts existing network connections. Rebooting can take a few minutes. To reboot the HP EFS WAN Accelerator Manager 1. Click the Setup Manager tab to expand the Setup HP EFS WAN Accelerator Manager menu. 2. Click Reboot to display the Setup HP EFS WAN Accelerator Manager: Reboot Appliance page.
Figure 5-25. Setup HP EFS WAN Accelerator Manager: Reboot Appliance
3. Click Reboot Appliance. After you click Reboot Appliance, you are logged out of the system, and it is rebooted.
Shutting Down the HP EFS WAN Accelerator Manager
This section describes how to shut down the HP EFS WAN Accelerator Manager. To restart the system you must manually turn on the HP EFS WAN Accelerator Manager. To shutdown the HP EFS WAN Accelerator Manager 1. Click the Setup Manager tab to expand the Setup HP EFS WAN Accelerator Manager menu. 2. Click Shutdown to display the Setup HP EFS WAN Accelerator Manager: Shutdown Appliance page.
Figure 5-26. Setup HP EFS WAN Accelerator Manager: Shutdown Appliance

Displaying the CPU Utilization Report
This topic describes how to display the HP EFS WAN Accelerator Manager CPU Utilization report. The CPU Utilization report includes the following table of statistics that describe CPU activity for the time period you specify.
Field Average Percent Utilization for CPU 1 Peak Percent Utilization for CPU 1 Description Specifies the average CPU utilization. Specifies the peak CPU utilization.
The CPU Utilization report answers the following questions: How much CPU is being used? What is the average and peak percentage of CPU being used?
To create the Alarm Status report
1. Click the Reports tab to display the Reports menu. 2. Under HP EFS WAN Accelerator Manager in the left menu, click CPU Utilization to display the Reports: HP EFS WAN Accelerator Manager CPU Utilization page.

Figure 6-10. Reports

3. Select a period from the drop-down list: Last Hour or Last Day.
Displaying the Memory Paging Report
This topic describes how to display the HP EFS WAN Accelerator Manager Memory Paging report. The Memory Paging report provides the total number of memory pages, per second, utilized in the time period specified. The Memory Paging report includes the following table of statistics that describe memory paging activity for the time period you specify.
Field Total Pages Swapped Out Description Specifies the total number of pages swapped. If 100 pages are swapped approximately every two hours the HP EFS WAN Accelerator Manager is functioning properly. If thousands of pages are swapped every few minutes, contact HP technical support. Specifies the average number of pages swapped. If 100 pages are swapped every couple of hours the HP EFS WAN Accelerator Manageris functioning properly. If thousands of pages are swapped every few minutes, contact HP technical support. Specifies the peak number of pages swapped. Specifies the time and date that the peak number of pages were swapped.
Average Pages Swapped Out
Peak Pages Swapped Out Peak Pages Swapped Out Occured At
The Memory Paging report answers the following questions: How much memory is being used? What is the average and peak amount of memory pages swapped?
To display the Memory Paging report
1. Click the Reports tab to display the Reports menu. 2. Under HP EFS WAN Accelerator Manager in the left menu, click Memory Paging to display the Reports: HP EFS WAN Accelerator Manager Memory Paging page.

Figure 6-11. Reports: HP EFS WAN Accelerator Manager - Memory Paging Page
NOTE: To print your report, click the Printer icon in the upper right corner of the page.
Displaying the System Dumps Files Report
This topic describes how to display the HP EFS WAN Accelerator Manager System Dumps report. The HP EFS WAN Accelerator Manager System Dumps report displays a list of system dump files and their size. A system dump contains a copy of the kernel data on the system. System dump files can help you diagnose problems with the HP EFS WAN Accelerator Manager.
To view system dump files
1. Click the Reports tab to display the Reports menu. 2. Under HP EFS WAN Accelerator Manager in the left menu, click System Dumps to display the Reports: HP EFS WAN Accelerator Manager System Dumps page.
Figure 6-12. Reports: HP EFS WAN Accelerator Manager - System Dumps Page
3. Click the check box next to the file name to display a dialog box that enables you to download the file. 4. To generate system dump files, click Generate System Dump Now.
TIP: To remove a file, click the check box next to the entry and click Remove Selected Files.
Displaying the HP EFS WAN Accelerator Manager System Snapshots Report
This topic describes how to display the HP EFS WAN Accelerator Manager System Snapshots report. The HP EFS WAN Accelerator Manager System Snapshots report displays a list of system snapshot files and their size. A system snapshot is a saved copy of memory including the contents of all memory, bytes, hardware registers, and status indicators. It is periodically taken to restore the system in the event of failure. System snapshot files can help you diagnose problems in the HP EFS WAN Accelerator.
To display the System Snapshot report
1. Click the Reports tab to display the Reports menu. 2. Under HP EFS WAN Accelerator Manager in the left menu, click System Snapshots to display the Reports: HP EFS WAN Accelerator Manager System Snapshots page.
Figure 6-13. Reports: HP EFS WAN Accelerator Manager - System Snapshots Page
3. To view the system file, click the check box next to the file name. The system file appears in a new browser window.
Displaying HP EFS WAN Accelerator Manager System Logs
This topic describes how to display HP EFS WAN Accelerator Manager logs. Use system logs to monitor HP EFS WAN Accelerator Manager activity and to troubleshoot problems with the HP EFS WAN Accelerator Manager. The most recent log events are listed first.
To display HP EFS WAN Accelerator Manager logs
1. Click the System Log tab to display the System Log page.
Figure 6-14. System Log Page
2. Type a keyword or string in the Filter text box and click Filter to filter logs. 3. At the top of the Event list, click the page number to view additional pages for the log. To view previous pages, click Prev.

Dec 22 20:02:38 localhost cli[555]: signal 2 (SIGINT) Dec 22 20:03:16 localhost cli[555]: signal 2 (SIGINT) Dec 22 20:04:00 localhost cli[555]: command: show ip route static Dec 22 20:05:02 localhost cli[555]: command: show licenses Dec 22 20:05:09 localhost cli[555]: signal 2 (SIGINT) Dec 22 20:06:44 localhost cli[555]: command: show limit bandwidth Dec 22 20:06:49 localhost cli[555]: signal 2 (SIGINT) Dec 22 20:07:12 localhost cli[555]: command: show log
[cli.INFO]: user admin: CLI got [cli.INFO]: user admin: CLI got [cli.INFO]: user admin: Executing [cli.INFO]: user admin: Executing [cli.INFO]: user admin: CLI got [cli.INFO]: user admin: Executing [cli.INFO]: user admin: CLI got [cli.INFO]: user admin: Executing
Event Notification Commands
This section describe the email notification commands for the HP EFS WAN Accelerator Manager. This section contains the following commands: email domain on page 202 email mailhub on page 203 email notify events enable on page 203 email notify events recipient on page 203 email notify failures enable on page 203 email notify failures recipient on page 204 email send-test on page 204 show email on page 204

email domain

Description Sets the domain name from which the emails come from. If not set, the first domain name configured using the ip domain-list command is used. The host name does not appear in the return address, only the domain name. email domain <domain>

<domain>

Specifies the domain name for email notification.
minna (config) # email domain <domain> minna (config) #

email mailhub

<hostname or IP address> Specifies the SMTP server for email notifications.
Specifies the Simple Mail Transfer Protocol (SMTP) server for email notifications. The no command option disables the SMTP server. email mailhub <hostname or IP address>
minna (config) # email mailhub mail-server.example.com minna (config) #
email notify events enable
Description Syntax Parameters Example Enables email notification for events. The no command option disables email notification. email notify events enable None
minna (config) # email notify events enable minna (config) #
email notify events recipient
<email addr> Specifies the email address of users to receive notification of events.

Downloads a software image from a remote host. image fetch <URL or scp://username:password@hostname/path/filename> <image-filename>
Specifies the filename under which to store the image locally.
minna (config) # image fetch http://www.example.com/v.1.0 version1.0 minna (config) #

image install

Description Syntax Installs the software image onto a system partition. image install <image-filename> <partition>
<image-filename> <partition> Specifies the software image filename. Specifies the partition number: 1, 2.
minna (config) # image install version1.minna (config) #

image move

<source-image-name> <new-image-name> Specifies the name of the software image to move or rename. Specifies the new name of the software image.
Moves or renames an inactive system image on the hard disk. image move <source-image-name> <new-image-name>
minna (config) # image move www.example.com/v.1.0 version1.0 minna (config) #

show bootvar

Description Syntax Parameters Example Displays the software image that is booted upon the next reboot. show bootvar None
minna # show bootvar Installed images: Partition 1: rbtHP EFS WAN Accelerator ManagerHP EFS WAN Accelerator Manager/linux Siberia #3 2004-07-07 15:18:06 root@el:CVS_TMS/HEAD Partition 2: rbtHP EFS WAN Accelerator ManagerHP EFS WAN Accelerator Manager/linux Siberia #4 2004-07-09 18:29:04 root@el:CVS_TMS/HEAD Last boot partition: 2 Next boot partition: 2

show images

Description Syntax Parameters Displays the available software images. show images None
minna # show images Installed images: Partition 1: rbtHP EFS WAN Accelerator ManagerHP EFS WAN Accelerator Siberia #3 2004-07-07 15:18:06 root@el:CVS_TMS/HEAD Partition 2: rbtHP EFS WAN Accelerator ManagerHP EFS WAN Accelerator Siberia #4 2004-07-09 18:29:04 root@el:CVS_TMS/HEAD Last boot partition: 2 Next boot partition: 2 tcfe25 (config) # tcfe25 (config) # show images Images available to be installed: webimage.tbz rbtHP EFS WAN Accelerator ManagerHP EFS WAN Accelerator Siberia #4 2004-07-09 18:29:04 root@el:CVS_TMS/HEAD Installed images: Partition 1: rbtHP EFS WAN Accelerator ManagerHP EFS WAN Accelerator Siberia #3 2004-07-07 15:18:06 root@el:CVS_TMS/HEAD Partition 2: rbtHP EFS WAN Accelerator ManagerHP EFS WAN Accelerator Siberia #4 2004-07-09 18:29:04 root@el:CVS_TMS/HEAD Last boot partition: 2 Next boot partition: 2

Manager/linux

Web Commands
This section describes the Web commands for the HP EFS WAN Accelerator Manager. It contains the following commands: web auto-logout, next web enable on page 225 web http enable on page 225 web http port on page 225 web https enable on page 226 web https port on page 226 web session renewal on page 226 web session renewal on page 226

Invokes the telnet client. The user is returned to the CLI when telnet finishes.The telnet command takes the standard Linux options. telnet [<options>]
minna # telnet telnet>

traceroute

<options> The traceroute command takes the standard Linux options. 229
Executes the traceroute utility. The traceroute command takes the standard Linux options. traceroute [<options>]
minna # traceroute minna traceroute to minna.example.com (10.0.0.3), 30 hops max, 38 byte packets 1 minna (10.0.0.3) 0.035 ms 0.021 ms 0.013 ms
TCP Dump Capture Commands
This section describes tcpdump commands for the HP EFS WAN Accelerator Manager. It contains the following commands: file tcpdump, next show files tcpdump on page 230

file tcpdump

delete <filename> upload <filename> <URL> Deletes the tcpdump file. Uploads a tcpdump output file to a remote host. Takes a URL or: scp://username:password@hostname/path/filename>
Deletes or uploads a tcpdump file. file tcpdump {delete <filename> | upload <filename> <URL or scp:// username:password@hostname/path/filename>}
minna (config) # file tcpdump delete dumpfile minna (config) #

show files tcpdump

Description Syntax Parameters Example Displays files saved by the tcpdump utility. show files tcpdump None
minna # show files tcpdump minna.aux.dump minna #
B - HP EFS WAN ACCELERATOR MANAGER

APPENDIX B

HP EFS WAN Accelerator Manager Specifications
This appendix summarizes the technical specifications and status lights for the HP EFS WAN Accelerator Manager. This appendix includes the following sections: HP EFS WAN Accelerator Manager Technical Specifications, next Environmental Specifications on page 232
HP EFS WAN Accelerator Manager Technical Specifications
The following table summarizes the physical and power specifications for the HP EFS WAN Accelerator.
HP EFS WAN Accelerator Number of Units (U) Dimensions 1U 1.70 x 16.78 x 24 in (4.32 x 42.62 x 60.96 cm) Weight Voltage and Frequency Power Supply 24 to 27 lbs 10.91 to 12.27 kg 100-240V Voltage 50-60 Hz Frequency 6.0 A (110 V) to 3.0 A (220 V) Single, 350 W, power supply unit
Environmental Specifications
The following table summarizes the environmental requirements for the HP EFS WAN Accelerator.
All Models Temperature (Operating) Temperature (Storage) Relative Humidity 10 C - 35 C 50 F - 95 F -40 C - 70 C -40 F to 158 F 10 - 90% non-condensing
B - HP EFS WAN ACCELERATOR MANAGER SPECIFICATIONS

C - HP SYSTEM PORTS

APPENDIX C

HP System Ports

This appendix describes the HP system default, secure, and interactive ports. It contains the following sections: Default Ports, next Commonly Optimized Ports on page 233 Interactive Ports Automatically Forwarded by the HP System on page 234 Secure Ports Automatically Forwarded by the HP System on page 234

A aaa authentication login default 207 aaa authorization map default-user 208 aaa authorization map order 208 Additional resources 13 Administrative password, setting 145 Alarm thresholds, setting 60, 126 Appliance service, restarting appliance groups 109 Appliance Setup menu 37 Appliance, connecting 33 Appliance, connecting your network 32 Appliance, navigating 35 Appliance, overview of 17 Appliances, registering 20 arp 195 Authentication, enabling 100 Auto-discovery rules, overview of 47 Auto-registration, overview of 20 Auxiliary Interface, setting 93 B Bandwidth Optimization report 158 C CIFS transparent prepopulation, enabling 50 CIFS transparent prepopulation, overview of 51 clear arp-cache 195 CLI command negation 180 connecting 178 online help 179 overview 178 overview of 22 saving configurations 180 cli clear-history 180 cli default paging enable 181 cli session 181 clock set 186 clock timezone 187 Configuration backups for appliance groups, overview of 21 HP EFS WAN ACCELERATOR MANAGER USERS GUIDE
Configuration checklist 25 configuration copy 214 configuration delete 214 configuration factory 215 configuration fetch 215 configuration jump-start 216 configuration merge 216 configuration move 217 configuration new 217 configuration revert saved 217 configuration switch-to 218 configuration write 218 configure terminal 182 Connection history, viewing 160 Connections, verifying 32 CPU Utilization, alarm status 169 Current connections, viewing 163 D Date and time, setting 137 Default ports 233 Deny in-path rules, overview of 47 disable 182 Discard in-path rules, overview of 47 Disk full alarm status 169 DNS, setting 97, 123 E email mailhub 203 email notify events enable 203 email notify events recipient 203 email notify failures enable 203 email notify failures recipient 204 email send-test 202, 204 enable 183 Encryption, enabling 100 Event and failure notification, setting 63 Exchange 2003 support, enabling 53 Exchange port, setting for firewalls 53 F failover port 230 241
file tcpdump 230 Fixed-target rules overview of 47 FTP proxies, setting 103 G Getting help 14 H Hardware and software dependencies 12 Help technical support 14 Help menu 37 Home menu 37 Host name, setting 86 hostname 192 HP storage web site 14 HP, contacting 14 I image boot 221 image delete 222 image fetch 222 image install 222 image move 223 In-path interfaces, modifying 90 rules, setting 45 static network routes, setting 96 Installing, prerequisites 24 Interactive ports, forwarded 234 Interactive ports, forwarding traffic on 49 interface 189 interface dhcp 190 interface duplex 190 interface shutdown 191 interface speed 190 ip default-gateway 194 ip domain-list 193 ip host 193 ip name-server 192 ip route 194 L Layer 4 switch support, overview of 44 license delete 220 license install 221 Local logging, setting 69, 134 Local Setup menu 37 logging 199 logging files delete 199 logging files rotation force 200