Reset the configuration W definition of XP Continuous Access, XP Business Copy, Hitachi ShadowImage for z/OS, XP Auto LUN, XP FlashCopy Mirror, XP Snapshot, or XP Flex Copy, and then retry the operation.
Take the storage system offline from the host.

Add an alternative path.

Make sure that there is an alternative path from the MCU.
Part Code 0003 Error Number 2090 Error Message The settings of XP Business Copy, Hitachi ShadowImage for z/OS, XP FlashCopy Mirror, or XP Flex Copy exist. Either release the settings or stop the I/Os, and then retry the operation. The backup server of XP Business Copy, Hitachi ShadowImage for z/OS, or XP FlashCopy Mirror is running. Stop the backup server and then retry the operation. Some XP Business Copy, Hitachi ShadowImage for z/OS, XP FlashCopy Mirror, or XP Flex Copy pairs exist. Split them. Some XP Business Copy, Hitachi ShadowImage for z/OS, XP FlashCopy Mirror, or XP Flex Copy pairs exist. Resynchronize them. Some XP Business Copy, Hitachi ShadowImage for z/OS, XP FlashCopy Mirror, or XP Flex Copy pairs exist. Change the status of the paired volumes to Simplex. A maintenance operation is in progress. For example: LDEV formatting is in progress Correction Copy is in progress Drive Copy is in progress The CHIP/ACP status is changing The cache status is changing Replacement of an OEM drive microcode is in progress LDEV shredding is in progress Extent shredding is in progress Therefore the specified operation cannot be executed. Recommended Action Severity Level Failure Level 6
Either reset the settings or W stop the I/Os, and then retry the operation.
Stop the backup server, and then retry.
Split the XP Business Copy/XP FlashCopy Mirror/XP Flex Copy pairs.
Resynchronize the XP W Business Copy/XP FlashCopy Mirror/XP Flex Copy pairs.
Change the status of their volumes to Simplex.
Wait for a moment and retry. E
Part Code 0003 Error Number 2096 Error Message Currently running microcode version does not support the specified operation. The host specified by the WWN is performing I/O operations. The operation cannot be performed, because the SVP microcode version does not match the DKCMAIN (subsystem) microcode version. The operation cannot be performed, because an inoperative MP exists. Recommended Action Severity Level Failure Level 2
An error occurred. If this E problem persists call technical support. Stop executing I/Os, and then retry the operation. E

Part Code 0605 Error Number 8967 Error Message An error occurred on the DKC side. If this problem persists, call technical support. An error occurred on the DKC side. If this problem persists, call technical support. An error occurred on the DKC side. If this problem persists, call technical support. An error occurred on the DKC side. If this problem persists, call technical support. An error occurred while connecting to the subsystem. The configuration may be inconsistent. The configuration may be inconsistent. Select [All Refresh] and refresh the configuration. An error occurred on the DKC side. If this problem persists, call technical support. The operation of the external volume has been failed because all the paths to the external volume are blocked. The copy processing of XP Flex Copy is in progress. An incompatible emulation type is defined to the specified external volume. Recommended Action An error occurred on the DKC side. If this problem persists, call technical support. An error occurred on the DKC side. If this problem persists, call technical support. An error occurred on the DKC side. If this problem persists, call technical support. An error occurred on the DKC side. If this problem persists, call technical support. An error occurred while connecting to the storage system. The configuration may be inconsistent. Select [All Refresh] and refresh the configuration. Severity Level E Failure Level 3
An error occurred on the DKC side. If this problem persists, call technical support.
Restore more than one path E to the external volume, and then perform the operation of the external volume. The copy processing of XP Flex Copy is in progress. Check the contents of the XP External Storage Software Software spreadsheet, and specify a compatible emulation type. E E

8981 55309

The declaration sentence of Check the contents of the XP the spreadsheet is duplicated. External Storage Software Software spreadsheet. The version number entered in the spreadsheet is incorrect. Check the contents of the XP External Storage Software Software spreadsheet.

5531 1

The function name entered in Check the contents of the XP the spreadsheet is incorrect. External Storage Software (The function name is not Software spreadsheet. External.) The processing mode entered Check the contents of the XP in this spreadsheet is External Storage Software incorrect. (It is not New.) Software spreadsheet.

5841 1

If the problem persists despite W retrying, call technical support. The currently licensed capacity is insufficient. To increase the licensed capacity, buy a new license key. E
Release the XP Snapshot pair W or select another volume.
Part Code 0605 Error Number 58477 Error Message The operation cannot be performed, because the specified P-VOL is a virtual volume. The operation cannot be performed, because the specified P-VOL is a pool volume. The operation cannot be performed, because the specified S-VOL is a P-VOL for XP Snapshot. The operation cannot be performed, because the specified S-VOL is a virtual volume. The operation cannot be performed, because the specified S-VOL is a pool volume. The operation cannot be performed, because the specified reserved volume is a virtual volume. The operation cannot be performed, because the specified reserved volume is a pool volume. Recommended Action Specify another volume. Severity Level W Failure Level 5
Release the pool volume or select another volume.

Specify another volume.

This function is not supported. Check whether the E DKCMAIN microcode version and the SVP microcode version are mismatched. An error occurred while If this problem persists, call connecting to the subsystem. technical support. Wait for a while, and then retry the operation. The operation failed because Volumes that do not belong the CU group of the specified to CU group 0 are currently volume is not supported. not supported. Specify another volume. The Delete LU operation cannot be executed to the external volumes which include pool volumes. Release the pool volume setting and then retry the operation. Release the pool volume setting, and then retry the operation. E
Part Code 0605 Error Number 58623 Error Message The specified operation cannot be performed, because the XP Snapshot pair using the pool volumes to be maintained is in PSUS status or being restored. Resynchronize the pair or release the pair definition, and then retry the operation. An XP Snapshot pair is defined. Cancel the pair definition, and then retry the operation. Cancel the pair definition, E and then retry the operation. 5 Recommended Action Severity Level Failure Level 5
Resynchronize or release the E pair definition of the XP Snapshot pair using the pool volume to be maintained, and then retry the operation.
The operation failed because Check the volume and then the specified P-VOL was used retry the operation. by Delta resync of XP Continuous Access Journal. The operation failed because Check the volume and then the specified S-VOL was used retry the operation. by Delta resync of XP Continuous Access Journal. The specified volumes include remote command devices registered in the extended consistency group of Hitachi Universal Replicator for z/OS. Delete all journal groups registered in the extended consistency group to delete the remote command devices.

5108 5109

W W W W
The number of WWN(s) that Check the specified content, is monitored exceeds the and retry. maximum in the port. The number of WWN(s) that Check the specified content, is monitored exceeds the and retry. maximum. The number of the WWN Check the specified content, exceeds the maximum and retry. number that can be registered on an Performance Control group. The specified WWN is registered on a Performance Control group. Check the specified content, and retry.
The target WWN belongs to Check the specified content, the Performance Control and retry. group. The target WWNs have different attributes. This functionality is not available because Performance Control is not installed. Check the specified content, and retry. Install the required program product.
An error occurred during SVP If this problem persists, call processing. If this problem technical support. persists, call technical support. An error occurred during SVP If this problem persists, call processing. If this problem technical support. persists, call technical support. A file open error has occurred. A file access error has occurred.
If the same error occurs E despite retrying, call technical support. If the same error occurs E despite retrying, call technical support.
Part Code 5305 Error Number 6036 Error Message Recommended Action Severity Level Failure Level 2
An error occurred during SVP If the same error occurs E processing. If this problem despite retrying, call technical persists, call technical support. support. An error occurred during SVP If this problem persists, call processing. If this problem technical support. persists, call technical support. An error occurred during processing. If this problem persists, call technical support. If this problem persists, call technical support. E
An error occurred during SVP The error may be caused by E processing. a temporary communication failure. Reboot the SVP or If this problem persists, call select [Refresh All] on the File technical support. menu of XP Remote Web Console and refresh the configuration information to recover from the error. If this problem persists, call technical support.
Part Code 5305 Error Number 56303 Error Message Recommended Action Severity Level Failure Level 2
This function is not supported. Check the DKCMAIN E microcode version and the SVP microcode version because these versions might be mismatched. An error occurred while If this problem persists, call connecting to the subsystem. technical support. Wait for a while, and then retry the operation. E
Part Code 5305 Error Number 58575 Error Message Recommended Action Severity Level E Failure Level 6
Table 46 Error Codes Part Code 5307
Part Code 5307 Error Number 5102 Error Message The specified Performance Control group is not registered. The number of the Performance Control groups exceeds the maximum number that can be registered. Recommended Action Check the specified content, and retry. Check the specified content, and retry. Severity Level W Failure Level 6

Check the serial number, E SSID, link address and controller ID of the RCU, and set the correct value. Then retry the operation. If the same error occurs, contact technical support. Check the R-VOL status. Confirm the R-VOL status. E E

8851 8852

Invalid R-VOL. R-VOL status change failed after M-VOL status change. Confirm R-VOL status. Data Migration volume pair cannot be terminated because migration copy is in progress or the specified volume may in use by HOST. Delete Pair (Pairsplit-S) operation failed because M-VOL is in Simplex (SMPL) status.
Data migration could not be started. Check the status of the volume, because the specified volume may be online, or migration copy may be in progress.
The operation failed, because i of one of the following reasons: 1. The specified volume is simplex. 2. There is no duplex, duplex-pending, or suspend volume in the group. Verify the status, and retry the operation.
Part Code 6005 Error Number 8855 Error Message Delete (Pairsplit-S) operation failed because specified volume or other volume in the same group is in status transition. Recommended Action Severity Level Failure Level 4
The operation failed, because i of one of the following reasons: 1. The status of the specified volume or another volume in the same group is Deleting. 2. The status of the specified volume or another volume in the same group is Suspending. Wait for the transition of status to complete, and then retry the operation. If the transition of status does not occur, delete the volume by using the Force mode or the Delete pair by force option.
Delete Pair (Pairsplit-S) operation failed because Consistency Time of CT Group is not determined by SEQCHK. Some volumes were not deleted by the Delete Pair (Pairsplit-S) operation.
The operation failed, because i the status of the CT Group is SEQCHK. Retry the operation with either the volume or the group option. The operation failed for one i or more of the volumes, because either the pair status of the volume is SEQCHK or the consistency time of the volume does not match the consistency time of the CT group. Verify the status of the failed volumes. If necessary, retry the delete pair operation with the volume or the group option.
All volumes were not deleted The operation failed for all of i by the Delete Pair (Pairsplit-S) the volumes, because either operation. the pair status of the volume is SEQCHK or the consistency time of the volume does not match the consistency time of the CT group. Verify the status of the failed volumes. If necessary, retry the Delete Pair operation with the volume or the group option. Delete Pair (Pairsplit-S) operation with C/T option failed because some R-VOLs in the group are in Duplex (PAIR) or Pending (COPY) status. An internal error occurred. An internal error occurred. The pair status does not allow i this operation. Refresh and confirm the pair status information on the window first. If the R-VOL status is valid, retry the operation. Call technical support. Call technical support. E E

The specified GID is Specify the correct group incorrect. Specify the correct number. GID. The specified LUN is Specify the correct LUN. incorrect. Specify the correct LUN.
Part Code 6010 Error Number 5144 Error Message Some of the entered values are incorrect. Check the values and then specify correct values. A client processing error occurred. A client processing error occurred. A client processing error occurred. A client processing error occurred. An error occurred during processing. If this problem persists, call technical support. The system cannot apply the new configuration. Do you want to refresh? An error occurred when copying started. XP Snapshot has failed. Recommended Action Check the entered values, and then specify correct values. Call technical support. Call technical support. Call technical support. Call technical support. If this problem persists, call technical support. Severity Level W Failure Level 0
Select [Refresh], and retry.
Suspend the specified pair, W and perform the operation to resume the pair. If nothing changes despite retrying, call technical support. Select [OK]. W

9004 9006

XP Snapshot is done.
Exchange the channel cable The same as the message. connections after confirmation of the port type. Confirm that the R-VOLs to specify are varied off-line. SIMs of Continuous Access are cleared. XP Snapshot is complete. The Port Setting process has not completed. Do you want to continue for other ports? WARNING: Initial copy mode None is selected for some volume pairs. Are you sure that the M-VOL and the R-VOL of these pairs are already synchronized? Are you sure you want to output pair status into a snapshot file? (Warning: Snapshot file will be overwritten.) Confirm that the R-VOLs to specify are varied off-line. Select [OK]. Select [OK]. Select Yes to continue processing. After processing is complete, reset the port that is not in operation. Check the contents of the main and remote volumes. If the contents match, select [OK]. If not, select [Cancel].

9009 9021

W i i W
If you re-execute snapshot by W overwriting the existing snapshot, select OK. If you need to migrate the existing snapshot, select Cancel. And retry after the migration.
Part Code 6010 Error Number 9024 Error Message Recommended Action Severity Level W Failure Level 5

The Paircreate operation failed because the specified primary data volume was a V-VOL. The Paircreate operation failed because the specified primary data volume was a Pool-VOL.
Confirm the state of the specified primary data volume. Confirm the status of the specified primary data volume.
XP Remote Web Console Error Codes 245
Part Code 6505 Error Number 58490 Error Message Only the pair option of the primary data volume was updated. Failed to update the pair option of the secondary data volume. Recommended Action Severity Level Failure Level 0
A communication error W between the primary and the secondary storage systems occurred, or the microcode of the secondary storage system does not support the change pair option function. Check the main microcode of the secondary storage system, call technical support, and confirm whether the microcode supports the change pair option function. If the microcode supports the function, call technical support because a communication error might have occurred. Check the DKCMAIN W microcode version of the secondary storage system, call technical support, and confirm whether the XP Continuous Access Journal or the Hitachi Universal Replicator for z/OS function supports external volumes. Check the DKCMAIN microcode version of the secondary storage system, call technical support, and confirm whether the XP Continuous Access Journal function supports XP LUN Security Extension Software VMA. W
The Add Pair (Paircreate) operation failed because the XP Continuous Access Journal or the Hitachi Universal Replicator for z/OS function of the secondary subsystem does not support external volumes. The Paircreate operation failed because the XP Continuous Access Journal function of the secondary subsystem does not support XP LUN Security Extension Software VMA.
The operation failed because the capacity of the secondary subsystem has exceeded the licensed capacity of XP LUN Security Extension Software.
Confirm the licensed capacity W of the XP LUN Security Extension Software of the secondary storage system. To perform the specified operation, purchase a license key that allows you to use a capacity larger than the current capacity. W
The specified operation failed Check the attribute and the because of the attribute or the mirror status of the journal mirror status of the journal group. group. The operation failed. Refresh If this problem persists, call the window and retry the technical support. operation. If this problem persists, call technical support. The Paircreate operation failed because the specified primary data volume has been used by XP Flex Copy. Check the status of the specified primary data volume.

246 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes
Part Code 6505 Error Number 58506 Error Message The specified volume is already being used by Data Migration. Recommended Action Release the Data Migration setting. Severity Level W Failure Level 5
The Add Pair operation failed Release the Data Migration because the specified setting. primary data volume was used by Data Migration. The Add Pair (Paircreate) operation failed because the IO suppression mode of the specified primary data volume was enabled. The Add Pair (Paircreate) operation failed.
Disable the IO suppression W mode of the specified primary data volume on the XP External Storage Software window.
Check the mirror ID assigned W to the specified primary data volume number (CU:LDEV) The combination of the from the secondary storage specified primary data system, and assign a mirror volume number (CU:LDEV) and the mirror ID is the same ID that is not used, and retry as the combination specified the operation. from another primary subsystem. Check the mirror ID assigned to the specified primary data volume number (CU:LDEV) from the secondary subsystem. In the current microcode version, specify a mirror ID different from the ID used by an existing pair, when you create a pair by using the same primary data volume number (CU:LDEV.)
The capacity of the specified Check the capacity of the W volume is too small. volume, and specify a volume with larger capacity. A journal volume cannot be Check the emulation types of W added because the the specified volumes. combination of the emulation types for the journal volumes is not correct. The Add Pair (Paircreate) Check the emulation type of W operation failed because the the master journal group and emulation type of the master the restore journal group. journal group was different from the emulation type of the restore journal group. The operation to add journal Check the mirror status of the W volumes failed because of the specified journal group. mirror status of the specified journal group.

Journal groups cannot be Check the status of the deleted from the extended specified extended consistency group (EXCTG), consistency group (EXCTG.) because the specified EXCTG was not registered.
250 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes
Part Code 6505 Error Number 58607 Error Message Recommended Action Severity Level W Failure Level 0
Journal groups cannot be Check the journal groups in deleted from the extended the specified extended CT consistency group (EXCTG), group. because the specified journal group was not registered. The Resume Pair operation failed. The primary subsystem does not support the extended CT group (EXCTG) function, though the restore journal group belongs to an EXCTG. The timer type cannot be changed because the specified journal group belongs to an extended consistency group (EXCTG.) The parameter specified in the extended consistency group (EXCTG) operation is invalid.
Update the microcode of the W primary storage system to the version which supports the EXCTG function.
Check that the specified journal group belongs to an extended consistency group (EXCTG.)
Refresh the window, and then W retry the operation. If this problem persists, call technical support. W

5861 1

The specified operation failed Retry the operation after the because the microcode microcode exchange exchange was in progress on completes. the subsystem in the extended consistency group (EXCTG.) The previously executed update processing of the extended consistency group (EXCTG) has not completed. Wait for a while, and then retry the operation. The command device is specified incorrectly. Wait for a while, and then retry the operation.
Check whether the specified W CU number and the LDEV number indicates a command device. W
Journal groups cannot be Check whether the specified added to the extended journal group is registered. consistency group (EXCTG), because the specified journal group was not registered. Journal groups cannot be added to the extended consistency group (EXCTG), because the specified mirror ID was not registered in the specified journal group. Check the mirror ID of the specified journal group.
The specified journal group Check the status of the cannot be added to extended specified journal group. consistency group (EXCTG.)
Part Code 6505 Error Number 58617 Error Message Journal groups cannot be added to the extended consistency group (EXCTG), because the attributes of the EXCTG and the journal group are different. Recommended Action Check the attributes of the specified extended consistency group (EXCTG) and the journal group. Severity Level W Failure Level 0
Journal groups cannot be Check the timer type of the added to the extended specified journal group. consistency group (EXCTG), because the timer type of the specified journal group was not System. The status of the extended Wait for a while, refresh the consistency group (EXCTG) window, and then retry the is changing. Wait for a operation. while, refresh the window, and then retry the operation. Journal groups cannot be added to the extended consistency group (EXCTG), because the attribute of the specified journal group is invalid. Journal groups cannot be added to the extended consistency group (EXCTG), because the combination of the serial number and the command device is invalid. Journal groups cannot be added to the extended consistency group (EXCTG), because the specified journal groups are being used by another program product. Check the attribute of the specified journal group.

XP Remote Web Console Error Codes 295
Part Code 7005 Error Number 58572 Error Message Recommended Action Severity Level E Failure Level 6
This function is not supported. Check the DKCMAIN E microcode version and the SVP microcode version, because these versions might be mismatched. An error occurred while If this problem persists, call connecting to the subsystem. technical support. Wait for a while, and then retry the operation. An error occurred while If this problem persists, call connecting to the subsystem. technical support. Wait for a while, and then retry the operation. A communication time-out If this problem persists, call error occurred in the technical support. subsystem. Wait for a while, and then retry the operation. The operation failed, because the specified volume is being shredded by XP LUN Security Extension Software. Retry the operation after the shredding is completed. E
Confirm that the shredding i has completed in the XP LUN Security Extension Software window, and then retry the operation. i
The operation failed because To continue the operation, the specified S-VOL was used release the XP Snapshot by XP Snapshot. setting. The operation failed because To continue the operation, the volume was shared by an release the XP Snapshot XP Snapshot pair. setting. The operation failed because the volume was shared by an XP Snapshot pair in COPY (RS-R) status. Check the conditions for using XP Business Copy in conjunction with XP Snapshot.
The operation failed because Volumes that do not belong the CU group of the specified to CU group 0 are currently volume is not supported. not supported. Specify another volume. The operation failed because Check the volume, and then the specified P-VOL was used retry the operation. by Delta resync of XP Continuous Access Journal. The operation failed because Check the volume, and then the specified S-VOL was used retry the operation. by Delta resync of XP Continuous Access Journal.
296 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes
Part Code 7005 Error Number 58632 Error Message The reserve volume setting failed because the specified volume was used by Delta resync of XP Continuous Access Journal. Recommended Action Check the volume, and then retry the operation. Severity Level W Failure Level 5

5871 1

The operation failed because Refresh the XP Business Copy W the specified MU number was window, and check the MU already used. Specify other number that can be used. MU numbers.

Table 60 Error Codes Part Code 7007
Part Code 7007 Error Number 6012 Error Message Recommended Action Severity Level E Failure Level 2
Table 61 Error Codes Part Code 7010
Part Code 7010 Error Number Error Message The volume of S-VOL is different from specified P-VOL. You cannot create another L1 pair, because the number of L1 pairs exceeds the maximum. Recommended Action Severity Level Failure Level 0
Check the capacity of P-VOL W and S-VOL. Specify a volume with the same capacity, and retry the operation. You cannot create L1 pair for W the specified P-VOL. Delete the created L1 pair, and retry the operation. W
No MU number is available. You cannot create the specified pair. Check the possible number of pairs to be created. The MU number was not selected. No P-VOL is selected. No S-VOL is selected. The data has been changed. If you select another tab (page), the settings will be discarded. Are you sure you want to continue? Select MU number. Select P-VOL, and operate. Select S-VOL, and operate. Apply the data in the Preset Volume list. To stop the transaction, press OK and continue the operation.

7010 7010

5120 5121

5122 5123

No data has been changed. Go on to the next operation. W The password is invalid. Check the password. W
XP Remote Web Console Error Codes 297
Table 61 Error Codes Part Code 7010 (continued)
Part Code 7010 Error Number 5124 Error Message You cannot select more than one operation at a time. Recommended Action Severity Level Failure Level 0
Multiple volumes cannot be W processed in the operation. Process one volume at a time. W

5125 5126

No target volume is selected. Select the target volume. You cannot create another L2 pair, because the number of L2 pairs exceeds the maximum. The specified MU number is invalid. Select another MU number. The number of L1 pairs exceeds the maximum.
You cannot create L2 pair for W the specified P-VOL. Delete the created L2 pair, and retry the operation. Select the other MU number. i
You cannot create L1 pair for i the specified P-VOL. Delete the created L1 pair, and retry the operation. You cannot create L2 pair for i the specified P-VOL. Delete the created L2 pair, and retry the operation. Call technical support. W
The number of L2 pairs exceeds the maximum.
Unregistered error code. The settings could not be applied.
Wait for a while, and retry W the operation. If the same error occurs despite retrying, call technical support. Call technical support. Call technical support. If this problem persists call technical support. W W E

An error occurred during SVP E processing. If this problem persists, call technical support. If this problem persists, call technical support. W
Retry the operation. If you get E the same message again, reboot the computer. If necessary, call technical support. W E E
Communication is busy. Retry Wait a moment and retry. later. The SVP version and the DKC Call technical support. version do not match. The configuration could not be changed. No PCBs are installed for mainframe computers. Call technical support.
Install PCBs for mainframe W computers, and then retry the operation.
The specified LDEV is a Release the journal volume W journal volume, and therefore setting, or delete the target cannot be registered in LDEV volume from the LDEV group. groups. This function cannot be used Select another window. To by the storage partition set this function, contact the administrator. storage administrator. E
352 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes
Table 79 Error Codes Part Code 9107
Part Code 9107 Error Number 6012 Error Message An error occurred during SVP processing. If this problem persists, call technical support. Recommended Action Severity Level Failure Level 3
An error occurred during SVP E processing. If this problem persists, call technical support. E
An error occurred during SVP If this problem persists, call processing. If this problem technical support. persists, call technical support. An error occurred during SVP processing. If this problem persists, call technical support.
An error occurred during SVP E processing. If this problem persists, call technical support.
Table 80 Error Codes Part Code 91 10
Part Code Error Number Error Message Recommended Action Severity Level W Failure Level 0 0
No data has been changed. Select [OK], set data, and retry the operation.
You cannot register any more Select [OK], delete W hosts. unnecessary hosts, and retry the operation. You cannot define any more groups. The specified name has already been used. The specified name includes some invalid characters. Select [OK], delete some of the registered groups and make settings. W
Select [OK, and then register W another name. Select [OK], check the entered characters, and register the name again. W
The specified host is included Select [OK], check the W in another group. registered hosts, and retry the operation. The specified LDEV is included in another group. The entered name is invalid. Select [OK], check the registered LDEVs, and retry the operation. Select [OK], check the entered name, and retry the operation. W
Some attributes of the security Select [OK], check attributes group are invalid. of the security group, and retry the operation. Attributes of the security group differ from the attributes of other related security groups. Select [OK], check attributes of the security group, and retry the operation.

58443 58444

A VMA cannot be set up on Release the pair state or set this logical volume because up the VMA on another Continuous Access, XP logical volume. Business Copy, or XP Continuous Access Journal is using the logical volume.
A VMA cannot be set up on Release the XP Business Copy E this logical volume because pair, or set up the VMA on XP Business Copy is using the another logical volume. logical volume. The command was rejected, because you tried to set VMA to a logical volume with a path set on. Select other logical volumes without VMA, or delete the path of the specified logical volume, and then retry the operation. E
The specified logical volume Retry the operation after the E is blocked, or the LDEV is logical volume has recovered being formatted or shredded. from the blocked status or after the LDEV has been formatted or shredded.
368 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes
Part Code 9605 Error Number 58449 Error Message Recommended Action Severity Level Failure Level 5
The capacity of the logical Do one of the following: E volume is not the same as 1. Using Customized Volume that of the external volume main window, execute the with which the logical volume Volume Initialize is mapped. operation on the external group to which the logical volume belongs. 2. Using Customized Volume main window, execute the Make Volume operation on the external group to which the logical volume belongs. When executing the operation, check the LBA column in the XP LUN Security Extension Software window. An error occurred during SVP If this problem persists, call processing. If this problem technical support. persists, call technical support. E
Table 89 Error Codes Part Code 9607
Part Code 9607 Error Number 6012 Error Message Recommended Action Severity Level E Failure Level 3
An error occurred during SVP If this problem persists, call processing. If this problem technical support. persists, call technical support. An error occurred during SVP If this problem persists, call processing. If this problem technical support. persists, call technical support. An error occurred during SVP If this problem persists, call processing. If this problem technical support. persists, call technical support. An error occurred during SVP If this problem persists, call processing. If this problem technical support. persists, call technical support. A parameter error occurred. If this problem persists, call technical support. A parameter error occurred. If this problem persists, call technical support. If this problem persists, call technical support. If this problem persists, call technical support.
XP Remote Web Console Error Codes 369
Table 89 Error Codes Part Code 9607 (continued)
Part Code 9607 Error Number 7120 Error Message A parameter error occurred. If this problem persists, call technical support. A parameter error occurred. If this problem persists, call technical support. Recommended Action If this problem persists, call technical support. If this problem persists, call technical support. Severity Level E Failure Level 5

QuickSpecs

Overview
HP StorageWorks XP Disk Array Software Products
The HP StorageWorks XP Disk Array family offers a complete portfolio of software applications designed to help you confidently manage your mission-critical IT. HP StorageWorks XP Disk Array Software Products help you mitigate risks by providing constant data availability, reduce costs by providing efficient data management, and accelerate business growth with swift availability. The software offerings can be grouped into several major categories as follows: Device and Configuration Management Performance Management High Availability and Replication Business Continuity Solutions Mainframe-connect Tools For additional information regarding HP StorageWorks XP Disk Array products, refer to the following: Trial licenses are available for most XP Disk Array software. Please contact your HP Sales Representative for details. Please refer to the HP XP24000/XP20000 Disk Array Hardware Products QuickSpecs for information on XP24000/XP20000 array hardware. Please refer to the HP XP12000/XP10000 Disk Array Hardware Products QuickSpecs for information on XP12000/XP10000 array hardware. For more information on Software for the XP Disk Arrays, please refer to the HP9000 Configuration and Ordering Guide. The "HP9000, Integrity (Itanium based), and carrier-grade servers Configuration and Ordering Guide" is a comprehensive document which explains configuration and ordering information for servers and XP disk arrays.

What's New

HP StorageWorks XP Application Performance Extender Software 1.0 - helps customers prioritize their applications and give their mission critical applications the highest priorities to enable them meet their service level objectives. Key features include set minimum average bandwidth or maximum average allowed latency for key applications to achieve the desired quality of service levels, dynamically reprioritize applications based on their real time resource requirements, and get notified if key applications do not meet their SLA targets. Supports HP-UX, Windows and Linux hosts. HP StorageWorks XP Performance Advisor version 4.6 - provides detailed performance metrics for the XP Disk Array. Changes include: easy customer friendly installation process with reduced installation time, Solaris 10 x86-64 support, and XP resource utilization forecasting. HP Storage Essentials Performance Edition - complements Performance Advisor to deliver Path aware performance management. Changes include: backend visibility and reporting of performance, health and capacity for arrays managed as external storage behind the XP Disk Array.

DA - 12066

Worldwide Version 42 June 21, 2010

Page 1

Device and Configuration Management
HP StorageWorks XP Command View Advanced Edition Software
HP StorageWorks XP Command View Advanced Edition software provides centralized, web-based management for XP disk arrays. It reduces total cost of ownership by enabling collaboration among team members and by increasing the efficiency of storage administrators. It can be used together with the Remote Web Console software shipped free with every HP XP Disk Array. In an environment with many HP XP Disk Arrays, with complex replication, or with a need to migrate data among tiers of storage, HP XP Command View AE provides the device management capability you need. It allows you to manage multiple HP XP Disk Arrays from a central location. It provides the ability to install optional plug-in applications for enhanced functionality like visualizing complicated replication environments or non-disruptively migrating data between tiers of storage. HP XP Command View AE includes a Command Line Interface (CLI) to automate disk array configuration and management and includes an SMI-S provider to interface with SRM software. If you just need the CLI and SMI-S capabilities of XP Command View AE, you can use the HP XP Command View AE CLI SMI-S Licenses for XP12000/XP10000/XP1024/XP128/XP512/XP48. For the XP24000/XP20000 the CLI and SMI-S capabilities are conveniently included in HP StorageWorks XP Array Manager. NOTE: In a mainframe-only environment customers may choose not to purchase XP Array Manager. In that environment, if the customer wants XP Command View AE, please order the T1780A Command View AE media kit when ordering the T5281AA-AL products. As of March 2006, a special reduced cost version of XP Command View Advanced Edition has been provided exclusively for External Storage attached to the XP12000. NOTE: XP Command View Advanced Edition for the XP24000/XP20000 automatically supports External Storage, so the XP24000/XP20000 does not require special any XP Command View Advanced Edition licenses to cover externally attached capacity. HP XP Command View Advanced Edition (XP24000) HP XP Command View AE Base License T5281AA HP XP Command View AE 1TB 0-6TB LTU T5281AB HP XP Command View AE 1TB 7-15TB LTU T5281AC HP XP Command View AE 1TB 16-31TB LTU T5281AD HP XP Command View AE 1TB 32-63TB LTU T5281AE HP XP Command View AE 1TB 64-127TB LTU T5281AF HP XP Command View AE 1TB 128-255TB LTU T5281AG HP XP Command View AE 1TB 256-511TB LTU T5281AH HP XP Command View AE 1TB Over 511TB LTU T5281AJ HP XP Command View Advanced Edition (XP20000) HP XP20000 Command View AE LTU (frame unlimited license) T5281AL CV XP Advanced Edition (XP12000/XP1024/XP128/XP512/XP48) HP StorageWorks CV XP Advanced Edition Media kit T1780A HP StorageWorks CV XP Advanced Edition 1TB LTU (0-1TB) T1781AA HP StorageWorks CV XP Advanced Edition 1TB LTU (2-6TB) T1781AB HP StorageWorks CV XP Advanced Edition 1TB LTU (7-15TB) T1781AC HP StorageWorks CV XP Advanced Edition 1TB LTU (16-31TB) T1781AD HP StorageWorks CV XP Advanced Edition 1TB LTU (Over 31TB) T1781AE CV XP Advanced Edition (XP10000 only) HP StorageWorks CV XP Advanced Edition Media kit T1780A DA - 12066 Worldwide Version 42 June 21, 2010 Page 2

Page 3

Applications integrated with HP StorageWorks XP Command View AE HP StorageWorks XP Tiered Storage Manager Software XP Command View AE Plug-in
Overview HP StorageWorks XP Tiered Storage Manager is a plug-in application for XP CV AE that transparently migrates XP data (including internal and externally connected) among storage tiers, seamlessly and without down time. It lets you take advantage of various storage tiers to better manage system cost and performance. XP Tiered Storage Manager includes the data migration functionality of XP Auto LUN. When integrated with HP StorageWorks XP Performance Advisor, Tiered Storage Manager reports Array Group Busy Rates, allowing you to consider performance implications before migrating data. NOTE: If you require automatic performance-based migration, purchase HP StorageWorks XP Auto LUN. HP XP Auto LUN includes data migration functionality and performance monitoring functionality. Only the data migration functionality of XP Auto LUN is included with HP XP Tiered Storage Manager. XP24000/XP20000 Disk Arrays HP XP Tiered Storage Mgr Base License T5285AA HP XP Tiered Storage Mgr 1TB 0-6TB LTU T5285AB HP XP Tiered Storage Mgr 1TB 7-15TB LTU T5285AC HP XP Tiered Storage Mgr 1TB 16-31TB LTU T5285AD HP XP Tiered Storage Mgr 1TB 32-63TB LTU T5285AE HP XP Tiered Storage Mgr 1TB 64-127TB LTU T5285AF HP XP Tiered Storage Mgr 1TB 128-255TB LTU T5285AG HP XP Tiered Storage Mgr 1TB 256-511TB LTU T5285AH HP XP Tiered Storage Mgr 1TB Over 511TB LTU T5285AJ HP XP Tiered Storage Manager for External Storage 1TB 0-6TB LTU T5282AB HP XP Tiered Storage Manager for External Storage 1TB 7-15TB LTU T5282AC HP XP Tiered Storage Manager for External Storage 1TB 16-31TB LTU T5282AD HP XP Tiered Storage Manager for External Storage 1TB 32-63TB LTU T5282AE HP XP Tiered Storage Manager for External Storage 1TB 64-127TB LTU T5282AF HP XP Tiered Storage Manager for External Storage 1TB 128-255TB LTU T5282AG HP XP Tiered Storage Manager for External Storage 1TB 256-511TB LTU T5282AH HP XP Tiered Storage Manager for External Storage 1TB Over 511TB LTU T5282AJ XP12000/XP10000/XP1024/XP128 Disk Arrays XP Tiered Stg. Mgr. 1 TB LTU T1785AA XP Tiered Stg. Mgr. 1 TB LTU (2-6 TB) T1785AB XP Tiered Stg. Mgr. 1 TB LTU (7-15 TB) T1785AC XP Tiered Stg. Mgr. 1 TB LTU (16-31 TB) T1785AD XP Tiered Stg. Mgr. 1 TB LTU (32-63 TB) T1785AE Transparent migration - no need to disrupt or quiesce applications Non-disruptive to users Migrates data for both Internal or External Storage (MSA/EVA/XP) Provide persistent volume classifications (Migration Groups) Provide easily customizable available storage pools (Storage Tiers) No limit to the number of Storage Tiers - Volumes can reside within multiple tiers Easy search operations for building Migration Groups and Storage Tiers DA - 12066 Worldwide Version 42 June 21, 2010 Page 4

Page 9

Support Licensing
In summary, HP StorageWorks XP Array Manager Software provides the following capabilities: Add or delete I/O paths Configure fibre channel ports Create expanded LUNs Create custom size volumes (Mainframe and Open Systems) Establish volume host access permissions (Mainframe and Open Systems) Partition disk parity groups, cache, and host ports Control port bandwidth available to hosts Create read-only volumes for archiving and data retention (Mainframe and Open Systems) Reserve cache memory for frequently accessed data (Mainframe and Open Systems) Securely delete data (Mainframe and Open Systems) Automate array configuration and management tasks using the bundled in XP CV AE CLI Interface with SRM software platforms using the bundled in XP CV AE SMI-S provider See Service & Support section See Capacity-Licensed XP Software section For the XP24000, license-to-use is based on the total installed raw capacity of the array (NOTE NOTE:The licensed capacity must cover all installed raw capacity, whether the capacity is NOTE composed of Open Systems volumes or Mainframe volumes or a combination of both. Also note that you do not need to purchase XP Array Manager licenses to cover External Storage capacity. XP Array Manager includes coverage for unlimited External Storage capacity.) For the XP20000, license-to-use is per frame, covering any amount of installed capacity. The HP XP Command View AE CLI SMI-S License entitles you to use the SMI-S provider and the core command line interface (CLI) of HP StorageWorks XP Command View Advanced Edition Software. The core CLI has all the capabilities of the full CLI except the logical group commands. For more information about CLI features, see the HP StorageWorks XP Command View Advanced Edition software Device Manager CLI user guide. To install the HP XP Command View AE CLI SMIS License, first obtain a license key using the registration number from the HP XP Command View AE CLI SMI-S License Entitlement Certificate. Next install HP StorageWorks XP Command View AE using the Server Installation CD from the CD kit. Then install the CLI SMI-S license key (previously obtained) using the License button in the HP StorageWorks XP Command View AE web client login window. For installation instructions, see the HP StorageWorks XP Command View Advanced Edition software server installation and configuration guide for Device Manager and Provisioning Manager. To use all the features of HP StorageWorks XP Command View Advanced Edition Software, purchase and install the HP XP Command View AE license.

Page 10

HP StorageWorks LUN Configuration and Security Manager XP XP12000, XP10000, XP1024, XP128 only
Overview HP StorageWorks LUN Configuration and Security Manager XP provides Web-based storage capacity provisioning and host access security configuration for XP disk arrays. With it, you can add and delete paths, create custom-sized volumes, and configure foolproof LUN security that provides controlled, secure access to data stored on your XP disk array-preventing unauthorized servers from accessing your data. It also configures arrays to meet changing storage requirements and enables users to share a single Fibre Channel array among multiple servers. As of March 2006, the T1714Bx versions of LUN Configuration and Security Manager for XP12000 and XP10000 include, at no extra charge, Hitachi SANtinel - Port Security Option, Hitachi LDEV Guard for Mainframe, LUN Security XP Extension, Cache LUN XP, Hitachi FlashAccess for Mainframe, Data Integrity Check, and Hitachi Cache Manager Utility for Mainframe. These licenses are in addition to the licenses already included in LUN Configuration and Security Manager XP (Open Volume Manager, LUN Manager, VLVI for Mainframe, and SANtinel for Mainframe). NOTE: HP StorageWorks LUN Configuration and Security Manager XP is a required product for all XP12000/XP10000/XP1024/XP128 Disk Array implementations, except for Mainframe-only environments. NOTE: This product is licensed on a raw capacity basis for all XP arrays except for the XP10000. For the XP10000 ONLY, this product is licensed on a frame unlimited basis. HP LUN Config/Sec Mgr 1TB LTU (0-1TB) T1714BA HP LUN Config/Sec Mgr 1TB LTU (2-6TB) T1714BB HP LUN Config/Sec Mgr 1TB LTU (7-15TB) T1714BC HP LUN Config/Sec Mgr 1TB LTU (16-31TB) T1714BD HP LUN Config/Sec Mgr 1TB LTU (Over 31TB) T1714BE HP LUN Config/Sec Mgr (frame unlimited LTU) T1714BJ

first 10TB and purchase the 50TB block, T5227AD, to bring the purchased capacity up to 60TB. Then purchase the "60TB to Unlimited LTU" product, T5227AE, to provide the frame unlimited capacity. Upgrade purchase (XP24000 example): First determine how much XP Thin Provisioning capacity is installed. Then purchase the least expensive combination of 15TB, 25TB, and 50TB block products to add to the existing licenses so that the total sum of licensed capacity is greater than or equal to 60TB. Then select the "60TB to Unlimited LTU" product, T5227AE, to provide the frame unlimited capacity.
HP StorageWorks LUN Security XP Extension (also known as Data Retention Utility) XP24000, XP20000, XP12000, XP10000 only
Overview HP StorageWorks LUN Security XP Extension provides a web-based highly secure method of LDEV access control, allowing a storage administrator to protect critical data for archiving or data retention purposes. It can help a storage administrator manage business critical or sensitive data. As of March 2006, LUN Security XP Extension is included with the T1714Bx version of LUN Configuration and Security Manager for XP12000/XP10000. NOTE: Purchase and deployment of this product does not by itself ensure that regulatory/legal requirements for data retention will be met and compliance is not implicitly or explicitly guaranteed. XP24000/XP20000 Disk Arrays Included with HP StorageWorks XP Array Manager. See section for more information. XP12000/XP10000 Disk Arrays Included with HP StorageWorks LUN Configuration and Security Manager XP - see section for more information. Create read-only volumes Protect data from being replicated Allow data to be read only by authorized applications Protect datasets from write and read access Protect datasets from query/IO scan/file system inquiry operations Allow data to be locked down for a specific retention time period Host Agent integration using XP RAID Manager See Service & Support section Software XP RAID Manager version 1.15.xx (required for host agent integration) See Capacity-Licensed XP Software section
HP StorageWorks XP External Storage Software XP24000, XP20000, XP12000, XP10000 only
Overview HP StorageWorks XP External Storage allows you to host XP24000/XP20000/XP12000/XP10000 Disk Array LUNs on select external storage subsystems. XP External Storage allows you to tier storage capabilities and provision an XP disk array solution to optimize return on IT investment - letting you focus high-performance/high availability native XP24000/XP20000/XP12000/XP10000 Disk Array capacity against your most mission-critical data while hosting less critical data on cost optimized external storage subsystems. Data stored on external devices connected behind an XP disk array appear to a server to be stored inside the XP disk array. XP External Storage provides significant consolidation scalability - up to 247 Petabytes (PB) of external DA - 12066 Worldwide Version 42 June 21, 2010 Page 13

Support

Page 15

Prerequisites

Software LUN Configuration & Security Manager XP (required for configuration of XP12000/XP10000) Licensed on the total raw capacity of the XP12000/XP10000 array PLUS the configured usable capacity of any configured external storage LUN's. (See capacity licensed software section).
HP StorageWorks XP Data Shredder (also known as Volume Shredder)
Overview HP StorageWorks XP Data Shredder is a software product designed for the enterprise storage market and is supported on the XP24000/XP20000/XP12000/XP10000/XP1024/XP128 disk arrays. It helps IT staff by securely deleting data on the XP arrays via successive overwrites to minimize the likelihood that the deleted data could be restored. This may help to promote peace of mind and improved data security for high security environments that use the XP. It will be most useful for sensitive financial data or high security data in a variety of industries. XP24000/XP20000 Disk Arrays Included with HP StorageWorks XP Array Manager - see section for more information. XP12000/XP10000 Disk Arrays HP XP Data Shredder LTU for XP12000/XP10000 T1721A XP1024/XP128 Disk Arrays HP XP Data Shredder LTU for XP1024/XP128 T1621A Overwrites data volumes up to 8 times User selectable overwrite patterns Ease of use Verification that overwrites have been completed Percentage of completion display Abort feature to stop the process See Service & Support section Software LUN Configuration & Security Manager XP (required for configuration of XP arrays) License-to-use for unlimited storage capacity on one XP Disk Array

Page 16

Performance Management Software
HP StorageWorks XP Performance Advisor Software All XP Disk Arrays and SVS200
Overview HP StorageWorks XP Performance Advisor Software is a web-based application for collecting, monitoring and displaying the performance of your XP disk array. With XP Performance Advisor, you choose the time and duration of performance data collection-so you can pinpoint activities that significantly impact your disk array and tune the array accordingly. You can easily monitor storage performance and display usage statistics for your storage system at any level, from a complete system overview down to individual components. You can also filter hosts, arrays and array components, so you're only seeing the hosts and arrays you want to see. You can also generate, schedule and view detailed performance reports which will allow you to identify any performance bottlenecks in your XP array. Performance Advisor v3.4, v3.5, v4.0 and v4.5 integrate with HP StorageWorks XP Tiered Storage Manager, providing Array Group performance data. This allows Tiered Storage Manager to monitor access patterns so that you can consider performance implications before migrating data. HP XP Performance Advisor Base License T5290AA HP XP Performance Advisor 1TB 0-6TB LTU T5290AB HP XP Performance Advisor 1TB 7-15TB LTU T5290AC HP XP Perf Advisor 1TB 16-31TB LTU T5290AD HP XP Perf Advisor 1TB 32-63TB LTU T5290AE HP XP Perf Advisor 64TB to Unlimited LTU T5290AF NOTE: In order to purchase the frame unlimited LTU you must first purchase 63TB of Performance Advisor licenses. NOTE: The HP XP Performance Advisor Base License includes the media kit. Real time data gathering and analysis System view of all array resources Dashboard for quick review of XP disk array performance status Macro view of applications to quickly isolate and troubleshoot performance problems Detailed performance report generation and scheduling Flexible event notification and large 320 GB historical repository Multi-OS support Multiple management stations support Coexistence of Windows-based host agent and Windows-based management station on the same server (not recommended for large configurations) XP External Storage performance monitoring Integrates with HP StorageWorks XP Tiered Storage Manager (Requires Performance Advisor v3.4, v3.5, v4.0, v4.5 or v4.6 and HP StorageWorks XP Command View AE v5.9, v6.0, v6.1, v6.2, v6.3 or v6.4. Performance Advisor v4.6 and XP Command View AE v6.4 provide the best combination of features and performance.) See Service & Support section Management Station for standalone deployment (provided separately by customer) Management Server on its own management station Supports single core, dual-core, and quad-core processors Windows Server 2003 R2 Standard and Enterprise Edition (SP1, SP2)/32-bit and 64-bit; Windows Server 2003 Standard and Enterprise Edition (SP1, SP2)/32-bit and 64-bit; Windows Storage Server 2003 R2, Windows XP Professional (SP2, SP3)/32-bit; Windows Vista/32-bit; Windows Vista (SP1)/32-bit; Windows 2008/32-bit; Windows 2008 (SP1, SP2)/32-bit; Windows 2008 R2/32-bit and 64-bit; VMware; Hyper-V; XEN. 3-GHz CPU, 4-GHz CPU (recommended for large configurations > 2GB database) 2 GB RAM (minimum), 4 GB RAM (recommended for large configurations > 2GB DA - 12066 Worldwide Version 42 June 21, 2010 Page 17

Set minimum average bandwidth specification per workload Set maximum average allowed latency specification per workload Application level quality of service support for HP-UX host Server level quality of service support for Windows and Linux hosts 16 levels of host traffic prioritization Alarm notifications if monitored applications do not meet their service level objectives Charts showing real time application performance in terms of bandwidth or latency Workload performance reports showing current and historical performance against the desired service level objectives Coexistence with XP Performance Advisor Management Server See Service & Support section Management Station for standalone deployment (provided separately by customer) Management Server on its own management station, refer to the Support Matrix for supported platforms DVD drive 2 GHz CPU (minimum), 4 GHz CPU for complex configuration and/or multiple arrays 512 MB RAM (minimum), 1 GB RAM for complex configuration and/or multiple arrays 10 GB free space on hard drive Ethernet LAN card VGA graphics display with 256 colors Agent: Host/Communication Agent refer to the HP StorageWorks XP Application Performance Extender Installation Guide Device: Command Device For best performance, it is recommended a dedicated port be reserved for Command Devices Minimum Array Firmware - refer to the release notes associated with the particular version of Application Performance Extender. License-to-use is based on the total installed raw capacity of the XP array being managed. External storage LUNs do not need to be considered. As extra internal disk capacity is added to the array, additional licensing for StorageWorks XP Application Performance Extender must also be purchased to cover the new disk capacity. See Capacity-Licensed XP Software section for more details.
HP Storage Essentials Performance Edition All XP Disk Arrays
Overview HP Storage Essentials Performance Edition provides single-pane-of-glass performance management for the SAN - from the application, through the SAN infrastructure, to XP Disk Arrays and EVA Disk Arrays. Two products are provided: a 150 MAP version designed for the EVA environment, and a 300 MAP version designed for the XP environment. The 150 MAP product includes the Storage Essentials media kit, 150 MAPs, one MAL for Storage Essentials Database Viewer or Exchange Viewer, and the EVA Storage Essentials Performance Pack. The 300 MAP product includes the Storage Essentials media kit, 300 MAPs, one MAL for Storage Essentials Database Viewer or Exchange Viewer, and the Storage Essentials Performance Pack Enterprise (for the XP). NOTE: A MAP is a Managed Access Port. The MAP count is essentially a count of the Fibre Channel ports in your SAN. A MAL is a Managed Application License. It provides linkage to applications like Microsoft Exchange, Oracle database, Sybase, Microsoft SQL, DB2, Informix and InterSystems Cach. NOTE: The 150 MAP product is compatible with the EVA and will not work with the XP. The 300 MAP DA - 12066 Worldwide Version 42 June 21, 2010 Page 19

Instant access to copied volumes Create up to nine concurrent copies using full-capacity replicas, up to sixty-four concurrent copies using Snapshot partial-capacity replicas Host Agent integration using XP RAID Manager XP24000/XP20000/XP12000/XP10000/XP1024/XP128 versions include licenses for Hitachi ShadowImage for Mainframe, providing local replication for mainframe volume types See Service & Support section Software XP RAID Manager (required for host agent integration) XP24000/XP20000 includes XP RAID Manager in XP Array Manager See Capacity-Licensed XP Software section. Licensing is based on the sum of all P-VOLs, S-VOLs (full copies) and POOL-VOL (Snapshot copies)
HP StorageWorks System Copy Software for SAP XP24000, XP20000, XP12000, XP10000
Overview HP StorageWorks System Copy Software for SAP provides organizations an easier way to create full and space-efficient system copies of their production databases for testing and development. By automating the multiple steps involved in the copy process, System Copy can save hours or days of time and effort. And by integrating with HP XP Business Copy software, downtime to the production database is eliminated. With HP System Copy, SAP customers can create copies more frequently to test and validate in-house developments, with real business data, in less time, and at a lower cost. For more information, please refer to: http://www.hp.com/go/systemcopy. Unlimited System Copies within single XP disk array HP StorageWorks System Copy Software for SAP Media and LTU TA683A HP StorageWorks System Copy Software for SAP E-Delivery Media and E-LTU TA683AAE Unlimited System Copies among all XP disk arrays in the data center HP StorageWorks System Copy SW for SAP Media and Unlimited LTU TA684A HP StorageWorks System Copy SW for SAP Unlimited E-Delivery Media and E-LTU TA684AAE Upgrade SKUs HP StorageWorks System Copy Software for SAP Unlimited Upgrade LTU TA685A HP StorageWorks System Copy Software for SAP Unlimited Upgrade E-LTU TA685AAE An online, full system copy of the SAP production database can be performed without any production downtime A space-efficient snapshot can be used to save disk space when creating copies with a shorter lifespan Automates the multiple manual steps typically involved in setting up and creating the system copy Integrates with XP Business Copy software to eliminate downtime Automates the renaming and reconfiguration of the new SAP instance, as well as presents the copy to a target system. Integrates with HP XP Thin Provisioning Software and HP XP External Storage Software Can be used with SAP Test Data Migration Server (TDMS) for data extraction See Service & Support section The following system requirements must be in place or installed SAP ERP 6.0 (Dual stack: ABAP, Java), CRM 5.0, SRM 5.0 HP-UX v.11iv2 or 11iv3 or Windows 2008 or 2003 Logical Volume Manager (LVM) Oracle 10g or MS SQL 2008/2005 Database

Page 25

HP XP Continuous Access Asynchronous Base License T5277AA HP XP Continuous Access Asynchronous 1TB 0-6TB LTU T5277AB HP XP Continuous Access Asynchronous 1TB 7-15TB LTU T5277AC HP XP Continuous Access Asynchronous 1TB 16-31TB LTU T5277AD HP XP Continuous Access Asynchronous 1TB 32-63TB LTU T5277AE HP XP Continuous Access Asynchronous 1TB 64-127TB LTU T5277AF HP XP Continuous Access Asynchronous 1TB 128-255TB LTU T5277AG HP XP Continuous Access Asynchronous 1TB 256-511TB LTU T5277AH HP XP Continuous Access Asynchronous 1TB Over 511TB LTU T5277AJ HP XP Continuous Access Journal Base License T5278AA HP XP Continuous Access Journal 1TB 0-6TB LTU T5278AB HP XP Continuous Access Journal 1TB 7-15TB LTU T5278AC HP XP Continuous Access Journal 1TB 16-31TB LTU T5278AD HP XP Continuous Access Journal 1TB 32-63TB LTU T5278AE HP XP Continuous Access Journal 1TB 64-127TB LTU T5278AF HP XP Continuous Access Journal 1TB 128-255TB LTU T5278AG HP XP Continuous Access Journal 1TB 256-511TB LTU T5278AH HP XP Continuous Access Journal 1TB Over 511TB LTU T5278AJ XP24000/XP20000 Disk Array Continuous Access Conversion LTU's (Used to convert from XP Continuous Access Sync to XP Continuous Access Async or to XP Continuous Access Journal, or to convert from XP Continuous Access Async to XP Continuous Access Journal.) See Capacity-Licensed XP Software section for usage details. HP XP Continuous Access Conversion Base License T5223AA HP XP Continuous Access Conversion 1TB 0-6TB LTU T5223AB HP XP Continuous Access Conversion 1TB 7-15TB LTU T5223AC HP XP Continuous Access Conversion 1TB 16-31TB LTU T5223AD HP XP Continuous Access Conversion 1TB 32-63TB LTU T5223AE HP XP Continuous Access Conversion 1TB 64-127TB LTU T5223AF HP XP Continuous Access Conversion 1TB 128-255TB LTU T5223AG HP XP Continuous Access Conversion 1TB 256-511TB LTU T5223AH HP XP Continuous Access Conversion 1TB Over 511TB LTU T5223AJ XP12000/XP10000 Disk Arrays and SVS200 HP Continuous Access XP Synchronous 1TB LTU (0-1TB) T1711AA HP Continuous Access XP Synchronous 1TB LTU (2-6TB) T1711AB HP Continuous Access XP Synchronous 1TB LTU (7-15TB) T1711AC HP Continuous Access XP Synchronous 1TB LTU (16-31TB) T1711AD HP Continuous Access XP Synchronous 1TB LTU (32-63TB) T1711AE HP Continuous Access XP Asynchronous 1TB LTU (0-1TB) T1777AA HP Continuous Access XP Asynchronous 1TB LTU (2-6TB) T1777AB HP Continuous Access XP Asynchronous 1TB LTU (7-15TB) T1777AC HP Continuous Access XP Asynchronous 1TB LTU (16-31TB) T1777AD HP Continuous Access XP Asynchronous 1TB LTU (32-63TB) T1777AE XP12000/XP10000 Disk Arrays HP Continuous Access XP Journal 1TB LTU (0-1TB) T1778AA HP Continuous Access XP Journal 1TB LTU (2-6TB) T1778AB HP Continuous Access XP Journal 1TB LTU (7-15TB) T1778AC

Page 26

HP Continuous Access XP Journal 1TB LTU (16-31TB) T1778AD HP Continuous Access XP Journal 1TB LTU (32-63TB) T1778AE XP12000/XP10000 Disk Arrays Continuous Access Conversion LTU's (Used to convert from XP Continuous Access Sync to XP Continuous Access Async or to XP Continuous Access Journal, or to convert from XP Continuous Access Async to XP Continuous Access Journal. Note: T1723Ax prior to March 2006 was HP Continuous Access XP Journal. In the new restructured Continuous Access product offering, T1723Ax is ideally suited to be the conversion product. Therefore it has simply been renamed to designate its new purpose.) See Capacity-Licensed XP Software section for usage details. HP Cont Access XP Conv 1TB 0-1TB LTU T1723AA HP Cont Access XP Conv 1TB 2-6TB LTU T1723AB HP Cont Access XP Conv 1TB 7-15TB LTU T1723AC HP Cont Access XP Conv 1TB 16-31TB LTU T1723AD HP Cont Access XP Conv 1TB 32-63TB LTU T1723AE XP1024/XP128 Disk Arrays HP Continuous Access XP 1TB LTU (0-1TB) T1611AA HP Continuous Access XP 1TB LTU (2-6TB) T1611AB HP Continuous Access XP 1TB LTU (7-15TB) T1611AC HP Continuous Access XP 1TB LTU (16-36TB) T1611AD HP Continuous Access XP Extension 1TB LTU (0-1TB) T1612AA HP Continuous Access XP Extension 1TB LTU (2-6TB) T1612AB HP Continuous Access XP Extension 1TB LTU (7-15TB) T1612AC HP Continuous Access XP Extension 1TB LTU (16-36TB) T1612AD Remote data mirroring between XP disk arrays Enables a wide range of remote mirroring solutions XP Continuous Access and XP Continuous Access Synchronous: Synchronous copy mode XP Continuous Access Extension and XP Continuous Access Asynchronous: Asynchronous copy mode using cache-based side files XP Continuous Access Journal: Asynchronous copy mode using disk-based Journal file Fast failover/failback for seamless, reliable mirroring recovery Host Agent integration using XP RAID Manager XP24000/XP20000/XP12000/XP10000/XP1024/XP128 XP Continuous Access / XP Continuous Access Sync include licenses for Hitachi TrueCopy for Mainframe, providing synchronous remote replication for mainframe volume types XP24000/XP20000/XP12000/XP10000 XP Continuous Access Async includes licenses for Hitachi True Copy for Mainframe and Hitachi TrueCopy Async for Mainframe, providing asynchronous remote replication for mainframe volume types XP1024/XP128 XP Continuous Access Extension includes licenses for Hitachi TrueCopy Async for Mainframe, providing asynchronous remote replication for mainframe volume types XP24000/XP20000/XP12000/XP10000 XP Continuous Access Journal includes licenses for Hitachi TrueCopy for Mainframe, Hitachi TrueCopy Async for Mainframe, and Hitachi Universal Replicator for Mainframe, providing asynchronous journal-based remote replication for mainframe volume types See Service & Support section XP1024/XP128 Software Continuous Access XP Extension requires that Continuous Access XP be installed first. See Capacity-Licensed XP Software section

Page 32

HP Continentalclusters T2346BA Continentalclusters supports recovery of single instance applications like Oracle over LVM, VxVM and CVM/CFS 4.1. Continentalclusters supports recovery of multi-instance applications like Oracle RAC over SLVM and CVM/CFS 4.1. Please contact your HP representative for details Software HP-UX 11i v1 or higher (For more information, please refer to: http://docs.hp.com) HP Serviceguard (11.17 or higher for CFS/CVM 4.1 support) HP Metrocluster with XP Continuous Access One license of Continentalclusters covers two pairs of clusters (Primary and Recovery). Use Option 888 (designed for use with HP Metrocluster with XP Continuous Access). Each license of Continentalclusters requires one license of B8109BA HP Metrocluster with XP Continuous Access.
HP StorageWorks XP Cluster Extension Software
NOTE: All versions support XP24000/XP20000/XP12000/XP10000/XP1024/128 disk arrays. HP StorageWorks XP Cluster Extension Software offers protection against system downtime to critical Overview applications for enterprise customers using the HP StorageWorks XP Disk Array family. It allows for handsfree failover/failback of server-storage system. It detects failures and automatically manages recovery without human intervention, offering comprehensive disaster tolerance against application downtime from fault, failure, or site disaster. HP XP Cluster Extension Software resurrects your critical applications at a remote site within seconds/minutes after a failover event over both metropolitan and global distances. XP CLX works seamlessly with your open-system clustering software, HP StorageWorks XP Continuous Access Software and your XP Disk Array storage system to provide a highly available IT system. For additional information, please visit hp.com at the following URL: http://www.hp.com/products1/storage/products/disk_arrays/xpstoragesw/cluster/index.html NOTE: Similar functionality exists for HP-UX servers with HP Metrocluster software. HP StorageWorks XP Cluster Extension for Windows T1656A HP StorageWorks XP Cluster Extension for Linux T1657B HP StorageWorks XP Cluster Extension for Solaris T1658A HP StorageWorks XP Cluster Extension for AIX T1659A Automatic failover/failback recovery solution for Serviceguard for Linux , Microsoft Cluster Service (MSCS) for Windows, IBM's HACMP cluster software for AIX, and Veritas Cluster Server (VCX) for Solaris Seamless integration of remote mirroring with server clusters Fully scripted turnkey solution for disaster recovery on Linux, Microsoft, AIX and Solaris See Service & Support section Software XP Continuous Access/XP Continuous Access Synchronous (required for synchronous copy mode-integrated solution) XP Continuous Access Extension/XP Continuous Access Asynchronous or XP Continuous Access Journal (required for asynchronous copy mode-integrated solution) XP RAID Manager (required for host agent integration) License-to-use on a per server basis. One License required for each server running XP Cluster Extension Software. DA - 12066 Worldwide Version 42 June 21, 2010 Page 33

Page 44

HP StorageWorks XP for Bus Cont Mgr Universal Replicator 4x4 Ext CT
HP StorageWorks XP for Bus Cont Mgr Universal Replicator 4x4 Ext CT allows the user to maintain data consistency within and across multiple (up to four) XP disk arrays for Hitachi Universal Replicator operations. XP24000/XP20000 Disk Arrays HP XP Bus Cont Mgr UR 4x4 Extended CT Group Base License T5256AA HP XP Bus Cont Mgr UR 4x4 Extended CT Group 1TB 0-6TB LTU T5256AB HP XP Bus Cont Mgr UR 4x4 Extended CT Group 1TB 7-15TB LTU T5256AC HP XP Bus Cont Mgr UR 4x4 Extended CT Group 1TB 16-31TB LTU T5256AD HP XP Bus Cont Mgr UR 4x4 Extended CT Group 1TB 32-63TB LTU T5256AE HP XP Bus Cont Mgr UR 4x4 Extended CT Group 1TB 64-127TB LTU T5256AF HP XP Bus Cont Mgr UR 4x4 Extended CT Group 1TB 128-255TB LTU T5256AG HP XP Bus Cont Mgr UR 4x4 Extended CT Group 1TB 256-511TB LTU T5256AH HP XP Bus Cont Mgr UR 4x4 Extended CT Group 1TB Over 511TB LTU T5256AJ XP12000/XP10000 Disk Arrays Hitachi Bus Cont Mgr UR 4x4 Extended CT Group 1TB 0-1TB LTU HITA756AA Hitachi Bus Cont Mgr UR 4x4 Extended CT Group 1TB 2-6TB LTU HITA756AB Hitachi Bus Cont Mgr UR 4x4 Extended CT Group 1TB 7-15TB LTU HITA756AC Hitachi Bus Cont Mgr UR 4x4 Extended CT Group 1TB 16-31TB 1TB LTU HITA756AD Hitachi Bus Cont Mgr UR 4x4 Extended CT Group 1TB 32-63TB 1TB LTU HITA756AE See Service & Support section Software HP StorageWorks XP for Business Continuity Manager (required) Hitachi Universal Replicator for Mainframe (required included with XP HP Continuous Access Journal) For XP24000/XP20000: T5256AA/AB/AC/AD/AE/AF/AG/AH/AJ licensed on one XP disk array, based on total capacity of the P-VOLs associated with Hitachi Universal Replicator. For multiple arrays managed under the same Business Continuity Manager, sum all of the Universal Replicator P-VOLs for all of the arrays and purchase the licenses based on the overall total (unlike other XP disk array software licenses which are licensed per array). See Capacity-Licensed XP Software section For XP12000/XP10000: HITA756AA/AB/AC/AD/AE licensed on one XP disk array, based on total capacity of the P-VOLs associated with Hitachi Universal Replicator. For multiple arrays managed under the same Business Continuity Manager, sum all of the Universal Replicator P-VOLs for all of the arrays and purchase the licenses based on the overall total (unlike other XP disk array software licenses which are licensed per array). No additional licenses required beyond 63TB. See Capacity-Licensed XP Software section.

Page 54

Capacity-licensed XP

1. 2. 3. Software

The Pool volume size = XxYxZ (rounded up to the next TB) Example: Based on a customer's total storage need, they have 300 P-Vols, each sized at 100GB (30,000GB, dividing by 1024 to convert to TB gives 29.3 TB, rounded to the next highest TB: 30TB total). The customer wants to keep 7 generations of Snapshot V-Vols. Finally, it has been estimated that 4.7GB of data will be updated between each generation. The customer must purchase license capacity to cover all LUNs being managed as a Snapshot XP P-Vol or V-Vol. In this case, the total used capacity would be calculated as follows: Used Capacity = P-Vol (source) LUNs + Pool volume size = 30TB + (4.7GBx7x300 = 9,870GB, dividing by 1024 to convert to TB gives 9.64 TB, rounded to the next highest TB: 10TB) for a total licensing requirement of 40TB Snapshot requires a V-Vol management area in Shared Memory. The Shared Memory requirement for the V-Vol management area is the sum of the P-Vol information capacity requirement + the Pool Volume information capacity requirement. See the Snapshot Users Guide for complete details regarding configuring Shared Memory for Snapshot. Shared Memory requirements differ between XP Disk Array models. For the XP24000/XP20000: For the XP24000 with just the basic Shared Memory Adapter (one AE155A) configured, and for the XP20000 with just the basic Shared Memory Adapter (one AE192A) configured, up to 4 TB of pool volume capacity is available. More pool capacity is available for the XP24000 by installing the optional Shared Memory Adapter (second AE155A) and additional Shared Memory. The XP20000 does not support the optional Shared Memory Adapter and is limited to the amount of Pool capacity supported by the basic Shared Memory Adapter. For the XP12000/XP10000: Snapshot on the XP12000 also requires the optional Shared Memory Platform Board and additional Shared Memory (SM) to store control information about the tracks that have been updated in the P-Vol and are, therefore, referenced by the V-Vol. The XP10000 also requires additional Shared Memory for Snapshot, but since the XP10000 does not support the optional Shared Memory Platform Board, it supports a much smaller Snapshot capacity than the XP12000. The XP10000 can allocate 342MB x 2 in SM. The XP12000 can allocate up to 2048MB x 2 in SM. Calculating the required SM for Snapshot is a function of the capacity of the Primary Volumes (P-Vols) and the Pool Volume. The SM requirement for the P-Vols = P-Vol capacity / 256KB) x 4B x 1.08. The SM requirement for the Pool Volume = (Pool Volume capacity / 256KB) x 32B. The sum of these two requirements is the total SM requirement. This number must be rounded up to the nearest 512MB increment. Example: Using the same example above, the SM requirement for the P-Vols = (30TB / 256KB) x 4 x 1.08 = 502MB. The SM requirement for the Pool Volume = (9,870GB 256KB) x 32 (1024 1024) = 1234MB. Therefore, the total SM requirement for SM is 502MB + 1234MB = 1736MB. By rounding up, the optional SM boards would have to be configured with 2048MB of cache. For HP StorageWorks XP HP StorageWorks XP Continuous Access Conversion licenses are used to convert an installed Continuous Access product to another Continuous Access product. The permitted conversions are: Continuous Access XP12000/XP10000 Conversion: XP Continuous Access Sync to XP Continuous Access Async XP Continuous Access Sync to XP Continuous Access Journal XP Continuous Access Async to XP Continuous Access Journal XP24000/XP20000

Page 55

XP Continuous Access Sync to XP Continuous Access Journal NOTE: XP24000/XP20000 Continuous Access Journal and XP24000/XP20000 Continuous Access Async have the same price. Since Continuous Access Journal includes licenses for Continuous Access Async, customers who need to upgrade to Continuous Access Async can upgrade to Continuous Access Journal and use the Async licenses included with Continuous Access Journal. 1: Example 1 A customer with an XP24000 has 10TB of Continuous Access Sync installed and no Continuous Access Journal installed. They wish to convert 5TB of the Continuous Access Sync capacity into Continuous Access Journal. They must purchase 5TB of Continuous Access Conversion as follows: Description HP XP Continuous Access Conversion Base License HP XP Continuous Access Conversion 1TB 0-6TB LTU Quantity Product Number 1 T5223AA 5 T5223AB
After installing these licenses, the disk array will have 5TB of Continuous Access Journal and 5TB of Continuous Access Sync. 5TB of Continuous Access Sync has been converted to Continuous Access Journal. 2: Example 2 A customer has an XP24000 with 10TB of Continuous Access Sync installed and no Continuous Access Journal installed. They wish to convert all of the 10TB of Continuous Access Sync capacity into Continuous Access Journal and add 6TB more of Continuous Access Journal. They must purchase 10TB of Continuous Access Conversion and 6TB of Continuous Access Journal as follows: Description Quantity Product Number HP XP Continuous Access Conversion Base License. 1 T5223AA HP XP Continuous Access Conversion 1TB 7-15TB LTU. 10 T5223AC Select the band (7-15TB) that matches the sum of the installed capacity of Continuous Access Journal, 0TB, plus this additional capacity. With the installation of these licenses, there are 10TB of Continuous Access Journal installed on the XP24000. HP XP Continuous Access Journal 1TB 16-31TB LTU. 6 T5278AD Select the band (16-31TB) that matches the sum of the installed capacity of Continuous Access Journal after conversion, 10TB, plus this additional capacity. The final total capacity of Continuous Access Journal is16TB. After installing these licenses, the disk array will have 16TB of Continuous Access Journal. 10TB of Continuous Access Sync has been converted to Continuous Access Journal, and 6TB of Continuous Access Journal have been added. 3: Example 3 A customer has 10TB of Continuous Access Sync and 5TB of Continuous Access Journal installed. The customer needs to convert 5TB of Continuous Access Sync to Continuous Access Journal. To do that, the customer must purchase 5TB of Continuous Access Conversion to increase the license capacity of XP Continuous Access Journal from 5TB to 10TB. Description Quantity Product Number HP XP Continuous Access Conversion 1TB 7-15TB. 5 T5223AC Select the band (7-15TB) that matches the sum of the installed capacity of Continuous Access Journal, 5TB, plus this additional capacity. The final total capacity of Continuous Access Journal is10TB. DA - 12066 Worldwide Version 42 June 21, 2010 Page 56