HP StorageWorks XP12000/XP10000 Disk Arrays
Disassembly Manual for AE002A Disk Controller (DKC) and AE045A/AU Disk Unit (DKU)
Part Number: AE002-96045 Edition: First August 2009

Table of Contents

SAFETY GUIDELINES..... 4
EXTERNAL APPEARANCE..... 8
3.1. 3.2. 3.3. 3.4. 3.5. 3.6. 3.7.
REMOVING THE COVER.... 17 REMOVING THE HARD DISK..... 18 REMOVING THE FDD/CD-ROM.... 18 REMOVING AND DISASSEMBLING THE POWER SUPPLY HS0102... 24 REMOVING THE LITHIUM BATTERY.... 26 REMOVING THE FAN..... 27 REMOVING THE MAIN PRINTED CIRCUIT BOARD AND MEMORY... 27

4.1. 4.2. 4.3. 4.4.

DISASSEMBLING THE POWER SUPPLY PPD1950... 29 DISASSEMBLING THE POWER SUPPLY PPD2950... 34 DISASSEMBLING THE POWER SUPPLY HS1950... 40 DISASSEMBLING THE POWER SUPPLY HS2950... 43

8.1. 8.2. 8.3.

REMOVING THE COVER.... 49 REMOVING THE BATTERY PACK.... 49 REMOVING THE PRINTED CIRCUIT BOARD.... 50

9.1. 9.2.

REMOVING AND DISASSEMBLING THE AE002A DKC AC POWER CABLE... 51 REMOVING AND DISASSEMBLING THE AE045A/AU DKU AC POWER CABLE.. 52

Purpose of This Manual

Intended Audience

Safety Guidelines

Safety Notation

Before Starting Work

General Precautions

Avoiding Electric Shock

Batteries

o o o 5

Moving the System

Other Precautions

1. Overview
Table 1 Components and Parts to Be Removed for the AE002A DKCTable 1 lists the components and parts to be removed. The numbers in figures correspond to those in tables.
Supply HS0102 Removing the Power Supply HS0102
Error! Reference source not found.
The following figures show the installed location of the components to be removed. The numbers in the figures correspond to those in Installed Location of the AE002A DKC Parts
2. Disassembling the OP-PANEL

Cover (B) Screw

Printed Circuit Board

Cover (A)

3. Disassembling the SVP

Screws

Covers

Screw s Screw s

HDD unit
Removing the Shield Cover

Shield cover

Removing the Front Panel and the Base Frame

Base frame

Front panel Tabs
Removing the Printed Circuit Board

Stepper FPC

Motor FPC Screw

Removing the Cover

Tape cover

Ejecting the CD-ROM Tray

Emergency hole Eject tool
Use a utility knife to cut here. FPC

Fan Bands Connector

Protective covers
To remove the lithium battery, place it here temporarily.

Bracket for screws

Memory board Remove or insert the DIMM diagonally.

Top view

Side view
4. Disassembling the Power Supply
AE002A DKC or the AE045A/AU DKU

Screw (a)

Screws Front panel (b)

Side panel

Screws (a)

Connector 3

Connector 2

Connector 1

Screw (b)

Screws (c)

Front Assembly
Partitioning chassis and insulating paper Connector 4
Printed Circuit Board (1)
Chassis Screws (a) Top panel

Screws (b) Rear panel

Printed Circuit Board (2)

Connector 5 Connector 6

Connector 7

Fan Assembly

Connector 8 Connector 9 Connector 10
Printed Circuit Board 4 Printed Circuit Board 5

Printed Circuit Board 6

Connector 11 Printed Circuit Board 3

Screws (b)

Screw (a) (a)

Front Panel

Side Panel

Connector 1 Screw (b)

Chassis 1

Side C

Side B

Side A

Screw (c) Side C

Screw (c)

Printed Circuit Board (5) Printed Circuit Board (4) Printed Circuit Board (3)
Screw (b) Connector 8 Connector 9 Connector 10

Rear panel

Heat-insulating board Heat-insulating board
Connectors Screw Printed Circuit Board (1) Screw

Screw Connector 2

Printed Circuit Board (4) Printed Circuit Board (3)
Printed Circuit Board (5)

Bracket

Circuit breaker

Cut here Front panel

Top view of the HS2950

Connector

Screw Top view of the HS2950 Rear panel

Bracket Screw (b)

Printed Circuit Board (3)

Chassis

Printed Circuit Board (4)

Fan Assembly Bracket

Flange nut

5. Disassembling the Fan

Screw Printed Circuit Board
6. Disassembling the Hard Drive (HDD)
Screw Screw Printed Circuit Board
7. Disassembling the Battery Box

Screw Screw Screw Screw

Cover 2 Cover 1 Screw

Flat cable

Screw and washer
8. Removing and Disassembling the AC Power Cable
AC box Terminal block cover AE002A DKC (Rear) Screw

AC power cable FG cable

AC box Terminal block cover

AE045A/AU DKU

(Rear)

FG cable AC power cable

HP XP Replication Manager 1TB 32-63TB LTU T5284BE HP XP Replication Manager 1TB 64-127TB LTU T5284BF HP XP Replication Manager 1TB 128-255TB LTU T5284BG HP XP Replication Manager 1TB 256-511TB LTU T5284BH HP XP Replication Manager 1TB Over 511TB LTU T5284BJ XP12000/XP10000/XP1024/XP128 Disk Arrays HP XP Replication Manager 1TB 0-1TB LTU T1784BA HP XP Replication Manager 1TB 2-6TB LTU T1784BB HP XP Replication Manager 1TB 7-15TB LTU T1784BC HP XP Replication Manager 1TB 16-31TB LTU T1784BD HP XP Replication Manager 1TB 32-63TB LTU T1784BE Replication Manager supports business continuity by simplifying replication management and monitoring Displays replication status, configuration and correlation of pair volumes Provides early warnings for any potential problems Eliminates tedious manual data entry See Services/Support section Hardware HP StorageWorks XP Command View Advanced Edition Management Station - see HP StorageWorks XP Command View Advanced Edition Software section for details. Software Requires the CLI/SMI-S portion of Command View AE. The full Command View AE implementation is not required. The CLI/SMI-S functionality can be obtained from any of the following: For XP24000 and XP20000: HP StorageWorks XP Array Manager Software For XP12000, XP10000, XP1024, and XP128: HP StorageWorks XP Command View AE CLI SMI-S License (T1781AM) HP StorageWorks XP Command View Advanced Edition Licensed per XP Disk Array. XP Replication Manager licensed capacity must be greater than or equal to the sum of the purchased license capacities of the following replication products installed on that array: HP StorageWorks XP Business Copy, HP StorageWorks XP Continuous Access Sync, HP StorageWorks XP Continuous Access Async, and HP StorageWorks XP Continuous Access Journal.
HP StorageWorks XP Provisioning Manager Software XP Command View AE Plug-in
Overview Product Description HP StorageWorks XP Provisioning Manager is a plug-in application for XP CV AE, that makes it easier for you to provision new disk array storage for use by attached host servers. Defines storage pools using LUNs from heterogeneous storage subsystems Maps the storage pool to the logical management scheme for the storage administrator Provides a simple interface for volume (file system and device file) management Provides centralized volume information views for distributed hosts

Models Licensing

Page 7
HP StorageWorks XP Array Manager Software XP24000, XP20000 only
Overview HP StorageWorks XP Array Manager Software provides web-based volume management, resource allocation, access control, and data security for your XP disk array. Configure and manage data volumes for most effective use of your XP disk array. Partition array resources to isolate applications, reserve cache memory for your most frequently accessed data, and control host port usage so that your most critical applications have the port bandwidth they need. Configure, manage, and secure all host access to the XP disk array so that you have efficient access to your data. Create read-only volumes for archiving and data retention, and securely delete your data when necessary. NOTE: HP StorageWorks XP Array Manager Software is a required product for all XP24000/XP20000 Disk Array implementations, except for Mainframe-only environments. XP24000 Disk Arrays HP XP Array Manager Base License T5214AA HP XP Array Manager 1TB 0-6TB LTU T5214AB HP XP Array Manager 1TB 7-15TB LTU T5214AC HP XP Array Manager 1TB 16-31TB LTU T5214AD HP XP Array Manager 1TB 32-63TB LTU T5214AE HP XP Array Manager 1TB 64-127TB LTU T5214AF HP XP Array Manager 1TB 128-255TB LTU T5214AG HP XP Array Manager 1TB 256-511TB LTU T5214AH HP XP Array Manager 1TB Over 511TB LTU T5214AJ XP20000 Disk Arrays HP XP20000 Array Manager LTU (frame unlimited license) T5214AL HP StorageWorks XP Array Manager provides several important capabilities. The following table lists the functions included in XP Array Manager. Function Name Supported Description Systems LUN Manager Open Systems Add paths, delete paths, set host mode, set/reset command device, configure ports, create LUNs and assign them to ports, configure port security, prevent IOSCAN by unauthorized servers from finding secure LUNs, and check every I/O for proper security. Open Volume Open Systems Create expanded volumes that are larger than standard volumes Manager (also called LU Size Expansion or LUSE), and create custom size volumes that are smaller than standard volumes (also called Custom Volume Size or CVS). Virtual LVI for Mainframe Create custom size mainframe volumes that are smaller than Mainframe standard volumes. Also called Custom Volume Size or CVS. Volume Security Mainframe Volume security for mainframe attached XP Disk Arrays that protects for Mainframe volumes from access by unauthorized hosts. Also called LDEV Security for Mainframe, and known as Hitachi SANtinel for Mainframe in previous XP disk array generations. Volume Security Mainframe Specify disk array ports through which hosts can access volumes. Port Security Also known as Hitachi SANtinel-Port Security Option in previous XP Option disk array generations. Data Retention Open Systems Volume access control, enabling archiving and data retention. Utility Protect key data sets from being updated, copied, accessed, or queried. Known as LUN Security XP Extension in previous XP disk array generations.

Page 8

Volume Retention Mainframe Manager for Mainframe Cache Residency Open Systems Manager Cache Residency Mainframe Manager for Mainframe Hitachi Cache Manager Utility for Mainframe Performance Control Performance Monitor Mainframe

Open Systems

Volume Shredder Both

RAID Manager

Disk/Cache Partition

Database Validator

XP Command View AE CLI/ SMI-S
XPInfo (after December 15, 2008)
Volume access control, enabling archiving and data retention. Assign access permissions (read/write, read only, and protect) to mainframe volumes. Known as Hitachi LDEV Guard for Mainframe in previous XP disk array generations. Improve performance by reserving areas of Cache Memory for frequently accessed data. Known as Cache LUN in previous XP disk array generations. Improve performance by reserving areas of Cache Memory for frequently accessed data. Known as Hitachi Flash Access for Mainframe and Cache LUN for Mainframe in previous XP disk array generations. Enhancement to management of cache residency. Provides host management software for mainframes that allows both volumes and datasets to be locked into cache. Allocate disk array port I/Os and transfer rate so that your most important applications have the performance they need. Also known as Server Priority Manager. Monitor usage, workload, and performance of disk drives, volumes, processors, and host interfaces in the XP Disk Array. View the information in graphical formats. Bundled with HP StorageWorks Performance Control XP and with HP StorageWorks XP Auto LUN in previous XP disk array generations. Securely delete data with repetitive overwrites to minimize the likelihood that it could be recovered. Overwrite up to eight times with random or user selected patterns. Known as Data Shredder in previous XP disk array generations. Host based command line interface that controls XP Continuous Access, XP Business Copy, Database Validator (Data Integrity Check) and Data Retention Utility (LUN Security XP Extension). Divide your HP StorageWorks XP Disk Array into up to 32 independent re configurable "sub arrays," each having its own host ports, disk parity groups, cache, and Partition Storage Administrator. Isolate critical applications from other applications and prevent unauthorized storage administrators from affecting your critical volumes. Reduce the risk of unplanned downtime with an added level of data protection in Oracle database environments. Database Validator works in conjunction with Oracle HARD-enabled databases to maintain integrity in the data IO path. It prevents data corruption between the database and the XP disk array and protects existing Oracle data on the XP disk array. Known as Data Integrity Check in previous XP disk array generations. Automate array configuration and management tasks using the Command Line Interface (CLI) and scripts. Interface with SRM software platforms using the SMI-S provider. Requires the XP Command View AE Management Station. See licensing section below for information regarding installing the CLI/SMI-S license. Understand the mapping between device files on the server and their associated storage ports and LDEVs in the XP disk array by using the XPInfo command line utility.

first 10TB and purchase the 50TB block, T5227AD, to bring the purchased capacity up to 60TB. Then purchase the "60TB to Unlimited LTU" product, T5227AE, to provide the frame unlimited capacity. Upgrade purchase (XP24000 example): First determine how much XP Thin Provisioning capacity is installed. Then purchase the least expensive combination of 15TB, 25TB, and 50TB block products to add to the existing licenses so that the total sum of licensed capacity is greater than or equal to 60TB. Then select the "60TB to Unlimited LTU" product, T5227AE, to provide the frame unlimited capacity.
HP StorageWorks LUN Security XP Extension (also known as Data Retention Utility) XP24000, XP20000, XP12000, XP10000 only
Overview HP StorageWorks LUN Security XP Extension provides a web-based highly secure method of LDEV access control, allowing a storage administrator to protect critical data for archiving or data retention purposes. It can help a storage administrator manage business critical or sensitive data. As of March 2006, LUN Security XP Extension is included with the T1714Bx version of LUN Configuration and Security Manager for XP12000/XP10000. NOTE: Purchase and deployment of this product does not by itself ensure that regulatory/legal requirements for data retention will be met and compliance is not implicitly or explicitly guaranteed. XP24000/XP20000 Disk Arrays Included with HP StorageWorks XP Array Manager. See section for more information. XP12000/XP10000 Disk Arrays Included with HP StorageWorks LUN Configuration and Security Manager XP - see section for more information. Create read-only volumes Protect data from being replicated Allow data to be read only by authorized applications Protect datasets from write and read access Protect datasets from query/IO scan/file system inquiry operations Allow data to be locked down for a specific retention time period Host Agent integration using XP RAID Manager See Service & Support section Software XP RAID Manager version 1.15.xx (required for host agent integration) See Capacity-Licensed XP Software section
HP StorageWorks XP External Storage Software XP24000, XP20000, XP12000, XP10000 only
Overview HP StorageWorks XP External Storage allows you to host XP24000/XP20000/XP12000/XP10000 Disk Array LUNs on select external storage subsystems. XP External Storage allows you to tier storage capabilities and provision an XP disk array solution to optimize return on IT investment - letting you focus high-performance/high availability native XP24000/XP20000/XP12000/XP10000 Disk Array capacity against your most mission-critical data while hosting less critical data on cost optimized external storage subsystems. Data stored on external devices connected behind an XP disk array appear to a server to be stored inside the XP disk array. XP External Storage provides significant consolidation scalability - up to 247 Petabytes (PB) of external DA - 12066 Worldwide Version 42 June 21, 2010 Page 13

Support

Page 15

Prerequisites

Software LUN Configuration & Security Manager XP (required for configuration of XP12000/XP10000) Licensed on the total raw capacity of the XP12000/XP10000 array PLUS the configured usable capacity of any configured external storage LUN's. (See capacity licensed software section).
HP StorageWorks XP Data Shredder (also known as Volume Shredder)
Overview HP StorageWorks XP Data Shredder is a software product designed for the enterprise storage market and is supported on the XP24000/XP20000/XP12000/XP10000/XP1024/XP128 disk arrays. It helps IT staff by securely deleting data on the XP arrays via successive overwrites to minimize the likelihood that the deleted data could be restored. This may help to promote peace of mind and improved data security for high security environments that use the XP. It will be most useful for sensitive financial data or high security data in a variety of industries. XP24000/XP20000 Disk Arrays Included with HP StorageWorks XP Array Manager - see section for more information. XP12000/XP10000 Disk Arrays HP XP Data Shredder LTU for XP12000/XP10000 T1721A XP1024/XP128 Disk Arrays HP XP Data Shredder LTU for XP1024/XP128 T1621A Overwrites data volumes up to 8 times User selectable overwrite patterns Ease of use Verification that overwrites have been completed Percentage of completion display Abort feature to stop the process See Service & Support section Software LUN Configuration & Security Manager XP (required for configuration of XP arrays) License-to-use for unlimited storage capacity on one XP Disk Array

Page 16

Performance Management Software
HP StorageWorks XP Performance Advisor Software All XP Disk Arrays and SVS200
Overview HP StorageWorks XP Performance Advisor Software is a web-based application for collecting, monitoring and displaying the performance of your XP disk array. With XP Performance Advisor, you choose the time and duration of performance data collection-so you can pinpoint activities that significantly impact your disk array and tune the array accordingly. You can easily monitor storage performance and display usage statistics for your storage system at any level, from a complete system overview down to individual components. You can also filter hosts, arrays and array components, so you're only seeing the hosts and arrays you want to see. You can also generate, schedule and view detailed performance reports which will allow you to identify any performance bottlenecks in your XP array. Performance Advisor v3.4, v3.5, v4.0 and v4.5 integrate with HP StorageWorks XP Tiered Storage Manager, providing Array Group performance data. This allows Tiered Storage Manager to monitor access patterns so that you can consider performance implications before migrating data. HP XP Performance Advisor Base License T5290AA HP XP Performance Advisor 1TB 0-6TB LTU T5290AB HP XP Performance Advisor 1TB 7-15TB LTU T5290AC HP XP Perf Advisor 1TB 16-31TB LTU T5290AD HP XP Perf Advisor 1TB 32-63TB LTU T5290AE HP XP Perf Advisor 64TB to Unlimited LTU T5290AF NOTE: In order to purchase the frame unlimited LTU you must first purchase 63TB of Performance Advisor licenses. NOTE: The HP XP Performance Advisor Base License includes the media kit. Real time data gathering and analysis System view of all array resources Dashboard for quick review of XP disk array performance status Macro view of applications to quickly isolate and troubleshoot performance problems Detailed performance report generation and scheduling Flexible event notification and large 320 GB historical repository Multi-OS support Multiple management stations support Coexistence of Windows-based host agent and Windows-based management station on the same server (not recommended for large configurations) XP External Storage performance monitoring Integrates with HP StorageWorks XP Tiered Storage Manager (Requires Performance Advisor v3.4, v3.5, v4.0, v4.5 or v4.6 and HP StorageWorks XP Command View AE v5.9, v6.0, v6.1, v6.2, v6.3 or v6.4. Performance Advisor v4.6 and XP Command View AE v6.4 provide the best combination of features and performance.) See Service & Support section Management Station for standalone deployment (provided separately by customer) Management Server on its own management station Supports single core, dual-core, and quad-core processors Windows Server 2003 R2 Standard and Enterprise Edition (SP1, SP2)/32-bit and 64-bit; Windows Server 2003 Standard and Enterprise Edition (SP1, SP2)/32-bit and 64-bit; Windows Storage Server 2003 R2, Windows XP Professional (SP2, SP3)/32-bit; Windows Vista/32-bit; Windows Vista (SP1)/32-bit; Windows 2008/32-bit; Windows 2008 (SP1, SP2)/32-bit; Windows 2008 R2/32-bit and 64-bit; VMware; Hyper-V; XEN. 3-GHz CPU, 4-GHz CPU (recommended for large configurations > 2GB database) 2 GB RAM (minimum), 4 GB RAM (recommended for large configurations > 2GB DA - 12066 Worldwide Version 42 June 21, 2010 Page 17

Page 21

HP Auto LUN XP 1TB LTU (0-1TB) T1715AA HP Auto LUN XP 1TB LTU (2-6TB) T1715AB HP Auto LUN XP 1TB LTU (7-15TB) T1715AC HP Auto LUN XP 1TB LTU (16-31TB) T1715AD HP Auto LUN XP 1TB LTU (32-63TB) T1715AE XP1024/XP128 Disk Arrays HP Auto LUN XP 1TB LTU (0-1TB) T1615AA HP Auto LUN XP 1TB LTU (2-6TB) T1615AB HP Auto LUN XP 1TB LTU (7-15TB) T1615AC HP Auto LUN XP 1TB LTU (16-36TB) T1615AD Identifies data volumes stressed by high I/O workloads Moves high priority data to underutilized array volumes Creates a volume migration plan Migrates data across different disks or RAID levels Virtually assures successful volume migration with "Never Give Up" mode option Includes Performance Monitor License For XP24000/XP20000: Performance Monitor is included in XP Array Manager instead of in XP Auto LUN See Service & Support section See Capacity-Licensed XP Software section
HP StorageWorks XP Cache LUN (also known as Cache Residency)
Overview HP StorageWorks XP Cache LUN lets you reserve areas of memory cache on your HP StorageWorks XP disk arrays to store frequently accessed information. It improves file access times and enables faster data transfers. Assigning information to on-board cache speeds up access to your data because cacheresident data is available at host data transfer speeds for both read and write operations. XP Cache LUN redirects I/O requests from the XP disk drives to data locked in the array's cache. It's transparent, it's simple to implement, and the performance gains it delivers are immediate. As of March 2006, XP Cache LUN is included with the T1714Bx version of LUN Configuration and Security Manager for XP12000/XP10000. XP24000/XP20000 Disk Arrays Included with HP StorageWorks XP Array Manager - see section for more information. XP12000/XP10000 Disk Arrays Included with HP StorageWorks LUN Configuration and Security Manager XP see section for more information. XP1024/XP128 Disk Arrays HP Cache LUN XP 1TB LTU (0-1TB) T1616AA HP Cache LUN XP 1TB LTU (2-6TB) T1616AB HP Cache LUN XP 1TB LTU (7-15TB) T1616AC HP Cache LUN XP 1TB LTU (16-36TB) T1616AD XP Disk Array Firmware based Lock data in cache memory Flexible user configuration Scalable See Service & Support section See Capacity-Licensed XP Software section

Instant access to copied volumes Create up to nine concurrent copies using full-capacity replicas, up to sixty-four concurrent copies using Snapshot partial-capacity replicas Host Agent integration using XP RAID Manager XP24000/XP20000/XP12000/XP10000/XP1024/XP128 versions include licenses for Hitachi ShadowImage for Mainframe, providing local replication for mainframe volume types See Service & Support section Software XP RAID Manager (required for host agent integration) XP24000/XP20000 includes XP RAID Manager in XP Array Manager See Capacity-Licensed XP Software section. Licensing is based on the sum of all P-VOLs, S-VOLs (full copies) and POOL-VOL (Snapshot copies)
HP StorageWorks System Copy Software for SAP XP24000, XP20000, XP12000, XP10000
Overview HP StorageWorks System Copy Software for SAP provides organizations an easier way to create full and space-efficient system copies of their production databases for testing and development. By automating the multiple steps involved in the copy process, System Copy can save hours or days of time and effort. And by integrating with HP XP Business Copy software, downtime to the production database is eliminated. With HP System Copy, SAP customers can create copies more frequently to test and validate in-house developments, with real business data, in less time, and at a lower cost. For more information, please refer to: http://www.hp.com/go/systemcopy. Unlimited System Copies within single XP disk array HP StorageWorks System Copy Software for SAP Media and LTU TA683A HP StorageWorks System Copy Software for SAP E-Delivery Media and E-LTU TA683AAE Unlimited System Copies among all XP disk arrays in the data center HP StorageWorks System Copy SW for SAP Media and Unlimited LTU TA684A HP StorageWorks System Copy SW for SAP Unlimited E-Delivery Media and E-LTU TA684AAE Upgrade SKUs HP StorageWorks System Copy Software for SAP Unlimited Upgrade LTU TA685A HP StorageWorks System Copy Software for SAP Unlimited Upgrade E-LTU TA685AAE An online, full system copy of the SAP production database can be performed without any production downtime A space-efficient snapshot can be used to save disk space when creating copies with a shorter lifespan Automates the multiple manual steps typically involved in setting up and creating the system copy Integrates with XP Business Copy software to eliminate downtime Automates the renaming and reconfiguration of the new SAP instance, as well as presents the copy to a target system. Integrates with HP XP Thin Provisioning Software and HP XP External Storage Software Can be used with SAP Test Data Migration Server (TDMS) for data extraction See Service & Support section The following system requirements must be in place or installed SAP ERP 6.0 (Dual stack: ABAP, Java), CRM 5.0, SRM 5.0 HP-UX v.11iv2 or 11iv3 or Windows 2008 or 2003 Logical Volume Manager (LVM) Oracle 10g or MS SQL 2008/2005 Database

Page 26

HP Continuous Access XP Journal 1TB LTU (16-31TB) T1778AD HP Continuous Access XP Journal 1TB LTU (32-63TB) T1778AE XP12000/XP10000 Disk Arrays Continuous Access Conversion LTU's (Used to convert from XP Continuous Access Sync to XP Continuous Access Async or to XP Continuous Access Journal, or to convert from XP Continuous Access Async to XP Continuous Access Journal. Note: T1723Ax prior to March 2006 was HP Continuous Access XP Journal. In the new restructured Continuous Access product offering, T1723Ax is ideally suited to be the conversion product. Therefore it has simply been renamed to designate its new purpose.) See Capacity-Licensed XP Software section for usage details. HP Cont Access XP Conv 1TB 0-1TB LTU T1723AA HP Cont Access XP Conv 1TB 2-6TB LTU T1723AB HP Cont Access XP Conv 1TB 7-15TB LTU T1723AC HP Cont Access XP Conv 1TB 16-31TB LTU T1723AD HP Cont Access XP Conv 1TB 32-63TB LTU T1723AE XP1024/XP128 Disk Arrays HP Continuous Access XP 1TB LTU (0-1TB) T1611AA HP Continuous Access XP 1TB LTU (2-6TB) T1611AB HP Continuous Access XP 1TB LTU (7-15TB) T1611AC HP Continuous Access XP 1TB LTU (16-36TB) T1611AD HP Continuous Access XP Extension 1TB LTU (0-1TB) T1612AA HP Continuous Access XP Extension 1TB LTU (2-6TB) T1612AB HP Continuous Access XP Extension 1TB LTU (7-15TB) T1612AC HP Continuous Access XP Extension 1TB LTU (16-36TB) T1612AD Remote data mirroring between XP disk arrays Enables a wide range of remote mirroring solutions XP Continuous Access and XP Continuous Access Synchronous: Synchronous copy mode XP Continuous Access Extension and XP Continuous Access Asynchronous: Asynchronous copy mode using cache-based side files XP Continuous Access Journal: Asynchronous copy mode using disk-based Journal file Fast failover/failback for seamless, reliable mirroring recovery Host Agent integration using XP RAID Manager XP24000/XP20000/XP12000/XP10000/XP1024/XP128 XP Continuous Access / XP Continuous Access Sync include licenses for Hitachi TrueCopy for Mainframe, providing synchronous remote replication for mainframe volume types XP24000/XP20000/XP12000/XP10000 XP Continuous Access Async includes licenses for Hitachi True Copy for Mainframe and Hitachi TrueCopy Async for Mainframe, providing asynchronous remote replication for mainframe volume types XP1024/XP128 XP Continuous Access Extension includes licenses for Hitachi TrueCopy Async for Mainframe, providing asynchronous remote replication for mainframe volume types XP24000/XP20000/XP12000/XP10000 XP Continuous Access Journal includes licenses for Hitachi TrueCopy for Mainframe, Hitachi TrueCopy Async for Mainframe, and Hitachi Universal Replicator for Mainframe, providing asynchronous journal-based remote replication for mainframe volume types See Service & Support section XP1024/XP128 Software Continuous Access XP Extension requires that Continuous Access XP be installed first. See Capacity-Licensed XP Software section

HP StorageWorks XP Auto Path for IBM AIX Hitachi Dynamic Link Mgr for Sun Solaris Hitachi HDLM for Windows Hitachi HDLM for Linux
Overview HP StorageWorks XP Auto Path for IBM AIX, Hitachi Dynamic Link Mgr for Sun Solaris, Hitachi HDLM for Windows and Hitachi HDLM for Linux are server-based software tools that provide I/O path failover and load balancing for your disk arrays. They offer load balancing to improve performance, while the software's automatic error detection features provide a fault-tolerant infrastructure to avert data stoppages or catastrophic halts. It automatically routes I/Os to an alternate path, and administrators see and manage all I/O activity via an easy-to-use graphical interface - while users see only reliable system performance. HP XP Auto Path SW for IBM AIX Media Kit T5208A HP XP Auto Path for IBM AIX 1 Server LTU T5209A HP XP Auto Path for AIX Unlim Server LTU T5210A Hitachi HDLM for Solaris Media Kit HIT5205A Hitachi HDLM for Solaris 1 Server LTU HIT5206A Hitachi HDLM Solaris Unlim Server LTU HIT5207A Hitachi HDLM for Windows, Media Kit HIT5201A Hitachi HDLM for Windows, 1 Server LTU HIT5202A Hitachi HDLM for Linux, Media Kit HIT5203A Hitachi HDLM for Linux, 1 Server LTU HIT5204A

Page 29

Supports wide range of operating systems Supports path failover and load balancing for IBM AIX, Microsoft Windows, SUN Solaris, and Linux operating systems Offers fault-tolerant path management manual or automatic failover and failback, automated path health checks, multiple active paths allowing bandwidth control at the HBA port level , dynamic LUN addition and deletion without a server reboot, easy installation and operation through auto-discovery function See Service & Support section For 1 Server LTU: License-to-use on a single server/XP Disk Array pair. Example: if you have two XP Disk Arrays and ten servers, all using Auto Path, you would need 20 of the 1 Server LTUs. For Unlim Server LTU: License-to-use with unlimited servers connected to a single XP Disk Array. Example: if you have two XP Disk Arrays and ten servers, all using Auto Path, you would need two of the Unlim Server LTUs. If a server has multiple partitions, a copy of HDLM is required for every partition that will be using HDLM. For example, if you have a server with 2 partitions and both partitions require HDLM, then you would need two of the 1 Server LTUs or one Unlim Server LTU.

Hitachi TrueCopy Async for Mainframe
Overview Models Provides Asynchronous copy mode remote mirroring for mainframe volume types. XP24000/XP20000 Disk Arrays Included with HP StorageWorks XP Continuous Access Asynchronous and XP Continuous Access Journal. XP12000/XP10000 Disk Arrays Included with HP StorageWorks XP Continuous Access Asynchronous and XP Continuous Access Journal XP1024/XP128 Disk Arrays Included with HP StorageWorks XP Continuous Access Extension - see section for more information. See Service & Support section XP24000/XP20000: Included with HP StorageWorks XP Continuous Access Asynchronous and XP Continuous Access Journal - see section for more information XP12000/XP10000: Included with HP StorageWorks XP Continuous Access Asynchronous and XP Continuous Access Journal - see section for more information XP1024/XP128: Included with HP StorageWorks XP Continuous Access Extension - see section for more information

Page 37

Hitachi Universal Replicator for Mainframe
Overview Models Provides asynchronous journal-based remote mirroring for mainframe volume types. XP24000/XP20000 Disk Arrays Included with HP StorageWorks XP Continuous Access Journal Software. XP12000/XP10000 Disk Arrays Included with HP StorageWorks XP Continuous Access Journal Software. See Service & Support section Software Business Continuity Manager (Recommended in a z/OS environment. Business Continuity Manager enables the following functions: Remote ShadowImage at-time split with Universal Replicator, maintenance of data consistency across Universal Replicator journal groups, automatic three site disaster recovery fail over, and other automation capabilities.) XP24000/XP20000: Included with HP StorageWorks XP Continuous Access Journal - see section for more information XP12000/XP10000: Included with HP StorageWorks XP Continuous Access Journal - see section for more information
Hitachi FlashAccess for Mainframe (also known as Cache LUN for Mainframe and Cache Residency for Mainframe)
Overview Models Provides LDEV Cache residency for mainframe volume types. XP24000/XP20000 Disk Arrays Included with HP StorageWorks XP Array Manager - see section for more information. XP12000/XP10000/XP1024/XP128 Disk Arrays Included with HP StorageWorks Cache LUN XP - see section for more information. See Service & Support section XP24000/XP20000: Included with HP StorageWorks XP Array Manager - see section for more information XP12000/XP10000/XP1024/XP128: Included with HP StorageWorks Cache LUN XP - see section for more information

Page 49

Capacity-licensed XP1024/XP128 Software Product Structure
For capacity-licensed Software for XP1024/XP128 Disk Arrays, licenses are ordered in 1TB increments only, with different 1TB license types corresponding to each of the capacity "tier" product numbers of the software product structure: Description Product Number 1TB increment, 0-1TB - base License-to-Use product HIT/T16xxAA 1TB increment, 2TB to 6TB HIT/T16xxAB 1TB increment, 7TB to 15TB HIT/T16xxAC 1TB increment, 16TB to 36TB HIT/T16xxAD Customers purchase these licenses under a fixed schedule depending on the license capacity required. All raw capacity figures should be rounded up to the nearest TB (depending on the total license capacity required). Purchase of capacity-based software falls into two categories: New Software purchase: Software licenses are being purchased along with a new XP array or for a new software purchase for an existing XP array implementation. License Capacity upgrade purchase: A customer is adding raw storage capacity to their system or expanding the use of certain software titles, requiring that they expand the license capacity by purchasing LTU upgrades. For new software purchase: They must purchase the first increment/tier (HIT/T16xxAA) for each software title and order up and through successive tiers to get to the total desired license capacity. Example: Customer purchases an 18TB raw capacity XP1024 and wants HP StorageWorks Cache LUN XP. This title is licensed based on the total raw capacity of the array. To provide for 18TB total license capacity for the software, the customer would order the following: Description Quantity Product Number 1TB increment-gets customer up to 1TB 1 T1616AA 1TB increment-gets customer up to 6TB 5 T1616AB 1TB increment-gets customer up to 15TB 9 T1616AC 1TB increment-gets customer up to 18TB 3 T1616AD NOTE: There is only one correct combination of licenses that would be ordered to provide the required total license capacity. For license capacity upgrades: The customer just purchases additional license product to provide the desired total license capacity starting with the existing license capacity and "picking up" in the structure starting from that point. In these cases, the customer determines the existing array capacity (raw or used as appropriate), the existing License Capacity for those software products, the additional raw storage or used capacity that will be added, and calculates the amount of additional license capacity required. Example: Customer has an 11.5TB raw capacity system with existing 12TB installed license capacity of Cache LUN XP. They then buy 4 TB raw upgrade disk (bringing the total raw storage capacity of the array up to 15.5 TB). In this case, the customer requires at least 3.5 TB (15.5 TB - 12 TB) additional license capacity of Cache LUN XP in order to "cover" the new total raw capacity of the array. Rounding 3.5 TB up to the nearest TB, they customer needs to purchase 4 TB license capacity for a total of 16 TB: Description Quantity Product Number 1TB increment-gets customer up to 15 TB 3 T1616AC 1TB increment-gets customer up to 16 TB 1 T1616AD

Page 54

Capacity-licensed XP

1. 2. 3. Software

The Pool volume size = XxYxZ (rounded up to the next TB) Example: Based on a customer's total storage need, they have 300 P-Vols, each sized at 100GB (30,000GB, dividing by 1024 to convert to TB gives 29.3 TB, rounded to the next highest TB: 30TB total). The customer wants to keep 7 generations of Snapshot V-Vols. Finally, it has been estimated that 4.7GB of data will be updated between each generation. The customer must purchase license capacity to cover all LUNs being managed as a Snapshot XP P-Vol or V-Vol. In this case, the total used capacity would be calculated as follows: Used Capacity = P-Vol (source) LUNs + Pool volume size = 30TB + (4.7GBx7x300 = 9,870GB, dividing by 1024 to convert to TB gives 9.64 TB, rounded to the next highest TB: 10TB) for a total licensing requirement of 40TB Snapshot requires a V-Vol management area in Shared Memory. The Shared Memory requirement for the V-Vol management area is the sum of the P-Vol information capacity requirement + the Pool Volume information capacity requirement. See the Snapshot Users Guide for complete details regarding configuring Shared Memory for Snapshot. Shared Memory requirements differ between XP Disk Array models. For the XP24000/XP20000: For the XP24000 with just the basic Shared Memory Adapter (one AE155A) configured, and for the XP20000 with just the basic Shared Memory Adapter (one AE192A) configured, up to 4 TB of pool volume capacity is available. More pool capacity is available for the XP24000 by installing the optional Shared Memory Adapter (second AE155A) and additional Shared Memory. The XP20000 does not support the optional Shared Memory Adapter and is limited to the amount of Pool capacity supported by the basic Shared Memory Adapter. For the XP12000/XP10000: Snapshot on the XP12000 also requires the optional Shared Memory Platform Board and additional Shared Memory (SM) to store control information about the tracks that have been updated in the P-Vol and are, therefore, referenced by the V-Vol. The XP10000 also requires additional Shared Memory for Snapshot, but since the XP10000 does not support the optional Shared Memory Platform Board, it supports a much smaller Snapshot capacity than the XP12000. The XP10000 can allocate 342MB x 2 in SM. The XP12000 can allocate up to 2048MB x 2 in SM. Calculating the required SM for Snapshot is a function of the capacity of the Primary Volumes (P-Vols) and the Pool Volume. The SM requirement for the P-Vols = P-Vol capacity / 256KB) x 4B x 1.08. The SM requirement for the Pool Volume = (Pool Volume capacity / 256KB) x 32B. The sum of these two requirements is the total SM requirement. This number must be rounded up to the nearest 512MB increment. Example: Using the same example above, the SM requirement for the P-Vols = (30TB / 256KB) x 4 x 1.08 = 502MB. The SM requirement for the Pool Volume = (9,870GB 256KB) x 32 (1024 1024) = 1234MB. Therefore, the total SM requirement for SM is 502MB + 1234MB = 1736MB. By rounding up, the optional SM boards would have to be configured with 2048MB of cache. For HP StorageWorks XP HP StorageWorks XP Continuous Access Conversion licenses are used to convert an installed Continuous Access product to another Continuous Access product. The permitted conversions are: Continuous Access XP12000/XP10000 Conversion: XP Continuous Access Sync to XP Continuous Access Async XP Continuous Access Sync to XP Continuous Access Journal XP Continuous Access Async to XP Continuous Access Journal XP24000/XP20000

HP StorageWorks XP Tiered Storage Manager: Special low cost licenses are provided to cover External Storage capacity All other XP24000/XP20000 raw capacity licensed software (Array Manager, Auto LUN, Performance Advisor, Application Performance Extender, Command View AE, and Provisioning Manager): These titles include coverage of unlimited External Storage capacity at no extra cost, and therefore are not affected by the presence or absence of External Storage For XP12000/XP10000: for the following titles, license capacity must be purchased to cover the total raw capacity of the XP12000/XP10000 plus the usable External Storage LUN's configured. HP StorageWorks XP Auto LUN (optional product). HP XP Disk/Cache Partition (optional product). HP StorageWorks XP Tiered Storage Manager (optional product). HP StorageWorks XP Provisioning Manager (optional product). Example: A customer wishes to deploy an XP12000 Disk Array solution that will have 5TB of native XP raw disk capacity along with an External Storage configuration. The customer intends to host 3TB of XP12000 logical capacity on an external EVA storage system. If the customer desires to use XP Auto LUN, the customer must purchase license capacity of HP StorageWorks XP Auto LUN software as follows: License Capacity = XP12000 raw storage capacity + External storage logical capacity requirement = 5TB + 3TB = 8TB total license capacity required for software licensing purposes Used Capacity licensed titles: For XP24000/XP20000/XP12000/XP10000: HP StorageWorks XP Business Copy (optional product) HP StorageWorks XP Continuous Access Synchronous (optional product) HP StorageWorks XP Continuous Access Asynchronous (optional product) HP StorageWorks XP Continuous Access Journal (optional product) HP StorageWorks XP Replication Manager (optional product) HP StorageWorks XP Tiered Storage Manager for External Storage (optional product for XP24000/XP20000 only) For these titles, license capacity must be purchased based on the 'standard' licensing terms for those titles. In other words, the standard licensing terms apply equally whether a given volume is being hosted on native XP24000/XP20000/XP12000/XP10000 capacity or on the external storage device. Example: A customer wishes to deploy an XP12000 Disk Array. In addition to provisioning XP12000 'native' disk capacity to host their main production data, the customer wishes to use HP StorageWorks XP External Storage to host a portion of non-production data on an externally-connected EVA storage system. In the final configuration, the customer wishes to create one local copy/mirror of 2.2TB of XP12000 logical capacity and host that copy on the EVA storage system using XP Business Copy. Per standard XP Business Copy licensing terms, the customer must purchase license capacity to cover all LUNs being managed as a XP Business Copy P-Vol or S-Vol. In this case, the total used capacity would be calculated as follows: License Capacity = Used Capacity = P-Vol (source) LUNs + S-Vols (copy) LUNs requirement = 2.2TB (source, hosted on the XP12000) + 2.2TB (copy, hosted on the EVA) = 4.4TB. Rounded to the next highest TB: 5 TB used capacity for XP Business Copy