Reviews & Opinions
Independent and trusted. Read before buy Husqvarna Rider 16C AWD!

Husqvarna Rider 16C AWD

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (French)
Husqvarna Rider 16C Awd Mower, size: 2.5 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Husqvarna Rider 16C AWDAbout Husqvarna Rider 16C AWD
Here you can find all about Husqvarna Rider 16C AWD like manual and other informations. For example: review.

Husqvarna Rider 16C AWD manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Husqvarna Rider 16C AWD please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Husqvarna Rider 16C AWD photo ]

Video review

Husqvarna RIDER 16C

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
jonasfisher 5:47am on Wednesday, October 6th, 2010 
Subaru has put a great package together, with...  Good handling Body roll in the corners
saiyas 7:12am on Monday, August 23rd, 2010 
Subaru could make this a really great car by ...  Lots of power and performance lackluster styling and cheapo interior, Poor fuel economy I live in Cleveland. I normally would need tw...  Fuel efficient (30mpg) if driven properly. Once boosted.
nunsta 2:34pm on Tuesday, May 18th, 2010 
If speed is your thing then their are few choices that make sense on Britains roads.
kemps 9:08am on Saturday, May 8th, 2010 
Descent car with good accessories at a very reasonable price. Excellent Ride quality, handling, position of the steering wheel and cockpit, grip.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

SERVICE

IPL, Rider 16 C AWD, 966830301, 2009-04

Rider 16C AWD

Spare parts Ersatzteile Pices dtaches Reserve onderdelen Repuestos Reservdelar

HIPL2009_42

RIDER R16C AWD SEAT, TS2500

Image name: 105524445 B

Compl No.

Part No.

85-91 53-11 74-24 93-43 33-56 55-56 53-11 64-55 63-50 99-31 12-66 88-01

Description

RIDER R16C AWD FUEL SYSTEM

Image name: 102524445 I

13-32 93-21 16-11 56-67 33-94 67-46 97-23 64-02 03-24 93-71

RIDER R16C AWD COVER

Image name: 204524445 K

59-89 59-03

59-24 84-89 59-24 84-40 05-24 76-24 77-24 77-79 54-24 78-59 95-59 96-50 25-40 05-33 21-33 22-42 91-40 05-37 39-40 05-23 92-42 75-40 05-32 65-40 05-43 32-37 42-39 06-96 36-01

76-24 76-24 76-24 76-01

LEFT RIGHT
RIDER R16C AWD HEIGHT ADJUSTMENT

Image name: 109424445 E

14-57 01-73 45-54 20-55 43-31 22-90 82-78 46-11 72-21 18-23 18-61 83-22 77-31 15-22 70-61 83-01
RIDER R16C AWD MOWER LIFT

Image name: 307424445 I

86-55 65-90 53-12 59-61 83-78 43-24 97-23 20-43 36-25 42-25 22-91 68-90 56-90 57-90 57-31 18-55 46-55 47-45 69-61 83-37 86-31 14-44 88-11 64-61 83-01

RIDER R16C AWD CHASSIS

Image name: 402424445 J
24-24 45-57 01-24 51-21 18-01
RIDER R16C AWD TRANSMISSION

Image name: 404424445 F

83-40 02-23 89-50 92-55 59-48 24-59 75-55 60-66 45-23 20-48 44-31 26-66 56-42 61-67 54-48 22-77 57-40 53-57 01-05

RIDER R16C AWD ENGINE

Image name: 301524445 L
28-24 57-11 64-21 64-21 18-50 06-91 45-55 63-33 57-23 64-66 84-24 83-59 74-83 94-01
RIDER R16C AWD CHASSIS, REAR

Image name: 406154445 J

58-21 05-21 10-31 40-31 26-98 59-31 26-77 34-68 14-40 60-98 61-11 61-24 67-11 64-23 18-98 72-24 59-24 62-59 93-23 18-98 74-91 87-24 51-98 75-21 14-26 21-56 65-23 64-98 82-83 43-98 84-98 85-94 69-24 55-11 64-21 18-91 87-24 51-98 86-24 64-10 01-12 17-23 64-67 33-88 99-24 93-71
84-98 84-98 84-98 84-98 84-01
RIDER R16C AWD HYDROSTAT K574 SP
61-98 65-98 66-45 19-98 68-31 15-45 16-98 70-40 28-40 28-40 28-45 20-40 28-45 32-40 28-40 28-40 28-40 28-40 28-40 28-40 28-40 28-41
61-11 61-11 61-11 61-11 61-11 61-11 61-11 61-11 61-11 61-11 61-11 61-11 61-11 61-01
RIDER R16C AWD HYDRAUL ENGINE

Image name: 107638445 J

60-24 67-24 64-42 38-11 64-21 18-00 89-00 90-57 01-11 64-21 18-42 65-43 73-80 78-80 79-80 80-45 64-12 22-13 11-02 66-37 33-43 85-23 78-37 33-37 38-57 01-81 17-49 97-73 58-43 52-43 47-49 28-45 67-48 66-22 10-48 65-23 16-48 66-84 17-23 70-25 16-49 74-95 17-47 52-44 19-25 16-24 93-23 66-21 16-45 11-01
67-45 67-45 67-45 67-45 67-03

RIDER R16C AWD STEERING

Image name: 105424445 L
19-57 63-67 08-59 74-37 52-74 55-23 18-49 95-86 34-84 43-86 36-88 78-21 04-57 01-50 09-42 41-31 40-22 04-50 08-67 54-11 74-58 91-52 24-53 94-31 14-55 46-55 47-42 73-23 20-51

09-50 09-50 09-50 09-03

RIDER R16C AWD CONTROLS

Image name: 100524445 G

15-30 17-88 91-23 64-61

RIDER R16C AWD PEDALS

PEDALS

Image name: 207154445 F

60-47 37-57 01-40 31-23 64-94 63-48 96-31 09-53 56-82 72-55 73-21 14-23 14-43 08-23 64-21 02-48 02-48 06-48 07-48 08-48 09-48 10-47 88-47 88-02
60-12 60-12 60-12 60-12 60-12 60-12 60-12 60-12 60-01
RIDER R16C AWD ELECTRICAL

Image name: 203524445 V

85-44 11-02 69-83 68-62 21-62 43-23 64-89 98-96 76-44 21-44 22-44 23-44 24-92 63-92 86-92 61-43 98-89 98-89 22-90 93-78 39-46 91-44 07-90 96-90 97-44 12-90 99-24 60-11 64-41 55-41 57-44 07-01

21-44 21-44 21-01

doc1

Operators manual

Rider 11 R Rider 11 C Rider 13 C Rider 16 C AWD Rider 16 C
Please read the operators manual carefully and make sure you understand the instructions before using the machine.

English

CONTENTS

Contents

CONTENTS Contents... INTRODUCTION Dear Customer,.. Driving and transport on public roads. Towing... Use... Good service... Service journal Pre-delivery service... After the rst 8 hours... KEY TO SYMBOLS Symbols... SAFETY INSTRUCTIONS Safety instructions... Driving on slopes.. Children... Maintenance... Transport... WHAT IS WHAT? Location of the controls.. PRESENTATION Presentation... Cutting unit.. Lifting lever for the cutting unit.. Cutting height adjustment lever.. Seat.... Fuelling.. Release lever... Release lever... Driving Before starting... Start the engine... Starting the engine with a weak battery.. Driving the Rider... Cutting tips... Starting on a slope, manual gearbox. (Rider 11 R and Rider 11 C)... Stop the engine.. Maintenance Maintenance schedule.. Cleaning... Removing of the machine hoods.. Checking and adjusting the steering wires. Checking the brake Rider 11 R and Rider 11 C. Adjusting the brake.. Adjusting the parking brake... Adjusting the parking brake... Adjusting the throttle wire.. Replacing the air lter.. Replacement of fuel lter.. Checking the fuel pumps air lter.. Checking the tyre pressure.. Ignition system... Fuses... 23 Check the safety system... Checking the engines cooling air intake.. Checking and adjustment of the cutting units ground pressure... Checking the cutting units parallelism.. Adjusting the parallelism of the cutting unit. Service position for the cutting unit.. Checking the blades... Removing the BioClip plug.. Lubrication Checking the engines oil level. Replacing the engine oil.. Checking the oil level in the transmission on Rider 13 C, Rider 16 AWD and Rider 16 C.. Lubricating the belt adjuster... Lubrication Rider 11 R and Rider 11 C. General lubrication.. Troubleshooting schedule Storage Winter storage.. Guard... Service... TECHNICAL DATA EC-declaration of conformity.. EC-declaration of conformity.. 30 30

2 English

INTRODUCTION

Dear Customer,

Thank you for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front-mounted cutting unit and a patented rear-wheel steering system. Riders are designed for maximum efciency even in small or conned areas. The closely grouped controls and pedal-operated hydrostatic transmission also contribute to the performance of this machine. This operators manual is a valuable document. By following its instructions (on operation, service, maintenance, etc.) you will signicantly extend the life of the machine and even its second-hand value. When you sell your Rider, make sure you pass on the operators manual to the new owner. The last chapter in the operators manual consists of a Service Journal. Make sure that all service work and repairs are recorded. A well-documented service history reduces the costs of seasonal maintenance and inuences the second-hand value of the machine. Bring the operators manual with the Rider when bringing it to a workshop for service procedures.
Driving and transport on public roads
Check the relevant road trafc regulations before driving the machine on a public road. If transporting the machine on another vehicle always use approved securing devices and make sure that the machine is securely held.

Towing

When your machine is equipped with a hydrostatic transmission you should only tow the machine over short distances and at a low speed, otherwise there is a risk of damaging the transmission. The power transmission must be disengaged when towing, see the instructions under the heading Clutch control.

This ride-on mower is designed to mow grass on open and level ground surfaces. In addition, there is a number of accessories recommended by the manufacturer that broadens the application area. Please contact your dealer for more information about which accessories are available. The machine may only be used with the equipment recommended by the manufacturer. All other types of use are incorrect. Compliance with and strict adherence to the conditions of operation, service and repair as specied by the manufacturer also constitute essential elements of the intended use. This machine should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and who are acquainted with the relevant safety procedures. Accident prevention regulations, all other generally recognised regulations on safety and occupational medicine, and all road trafc regulations must be observed at all times. Any arbitrary modications carried out to this machine may relieve the manufacturer of liability for any resulting damage or injury.

Good service

Husqvarna products are sold all over the world and ensures that you, the customer, get the best support and service. For example, before this machine was delivered it was inspected and adjusted by your dealer. See the certicate in the Service Journal in this manual. When you need spare parts or advice on service issues, warranty terms, etc., contact:
This Operators Manual belongs to machine with Engine serial number:

Transmission

On the machine's rating plate you will nd the following information: The machines type designation. The manufacturers type number. The machines serial number.
State the type designation and serial number when ordering spare parts.

Service journal

Pre-delivery service
Charge the battery for 4 hours at max. 3 amp. Fit steering wheel, seat and any optional equipment. Check and adjust tyre pressure (60 Kpa, 0.6 bar, 9 PSI). Adjust cutting unit: Adjust lift springs (effective weight of cutting unit should be 12-15kg / 26.5-33 lb). Adjust cutting unit so that rear edge is about 2-4 mm / 1/8 higher than front edge. Adjust cutting unit height setting so that cutting height limit is 5 mm / 3/16 above the frame of the unit at the lowest cutting height. Check that the right amount of oil is in the engine. Check that the right amount of oil is in the transmission. (Not Rider 11). Connect battery. Fill with fuel and start engine. Check that machine does not move in neutral.

_________________________________________________________ Date, mileage, stamp, signature
12 Tell customer about: Needs and benets of following the service schedule. Servicing and the inuence of this journal on the second-hand value of the machine. Range of applications for BioClip. Complete proof of sale etc.
Pre-delivery service carried out. No outstanding problems. Certied:

After the rst 8 hours

Change engine oil Change the oil in the gearbox. (Only AWDmachines) Check the synchronisation between the front and rear wheels. (Only AWD-machines)
10 Check: Forward drive. Reverse drive. Operation of blades. Seat safety switch. Lif lever safety switch. Safety switch for the hydrostat pedals/neutral position. Check engine speed. See the Technical data section. 11 Check the synchronisation between the front and rear wheels. (Rider 16 AWD) See the workshop manual. 3

4 English

KEY TO SYMBOLS

Symbols

These symbols are on the machine and in the instructions. WARNING! Careless or incorrect use can result in serious or fatal injury to the operator or others. Hydrostatic freewheel Ignition
Please read the operators manual carefully and make sure you understand the instructions before using the machine. Always wear: Approved hearing protection
Warning: rotating parts. Keep hands and feet clear.

Clutch in

This product is in accordance with applicable EC directives.

Clutch out

Parking brake Reverse Brake Neutral

Clutch

Slow Stop the engine. Noise emission to the environment according to the European Communitys Directive. The machines emission is specied in chapter Technical data and on label. Rotary blades Keep hands and feet away from under the hood when the engine is running

Battery

Choke Never drive across a slope

Oil level Cutting height

Never use the machine if persons, especially children, or animals, are in the vicinity
Never carry passengers on the machine or equipment Backwards Forwards Drive very slowly if no cutting unit is tted
The cutting deck must be tted at full speed.

Starting instructions

Check the engines oil level
Check the hydrostats oil level

Lift up the cutting unit

Apply and lock the parking brake.
If the engine is cold, use the choke
Release the parking brake before driving
Switch off the engine and take off the ignition cable before repairs or maintenance

6 English

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully. Stop the engine and prevent the engine from being started until you have cleaned the outlet channel. Look out for the ejector and do not direct it towards anyone. Stop the engine and prevent it from starting before you clean the cutting unit. Remember that the driver is responsible for dangers or accidents. Never carry passengers. The machine is only intended to be used by one person.

Insure your Rider

Check the insurance coverage for your new Rider. Contact your insurance company. You should have fully comprehensive insurance including: third party, re, damage, theft and liability

General use

Read all the instructions in this operators manual and on the machine before you start it. Ensure you understand them and then observe them.
Always look downwards and backwards before and while reversing. Keep watch for both large and small obstacles. Slow before cornering. Switch off the blades when you are not mowing. Take care when rounding a xed object, so that the blades do not hit it. Never run the machine over foreign objects. WARNING! This machine can sever hands and feet as well as throw objects. Failure to observe the safety instructions can result in serious injuries.
WARNING! This machine produces an electromagnetic eld during operation. This eld may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.
Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals. Only allow the machine to be used by adults who are familiar with its use. Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or drive off. Clear the area of objects such as stones, toys, wires, etc. that may become caught in the blades and be thrown out.
WARNING! Engine exhaust, some of its constituents and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive impairment. The engine emits carbon monoxide, which is a colourless, poisonous gas. Do not use the machine in enclosed spaces.
Only use the machine in daylight or in other well-lit conditions. Keep the machine at a safe distance from holes or other irregularities in the ground. Pay attention to other possible risks. Never use the machine if you are tired, if you have consumed alcohol, or if you are taking other drugs or medication that can affect your vision, judgement or coordination. Keep an eye on the trafc when working close to a road or when crossing it. Never leave the machine unsupervised with the engine running. Always stop the blades, apply the parking brake, stop the engine and remove the keys before leaving the machine.

Never allow children or other persons not trained in the use of the machine to use or service it. Local laws may regulate the age of the user.

This is what you do

Remove obstacles such as stones, branches, etc. Mow upwards and downwards, not sideways.
WARNING! You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.
Do not use the machine on ground that slopes more than 10. Take extra care if any attachments are tted that can change the stability of the machine. Avoid starting or stopping on a slope. If the tyres start to slip, stop the blades and drive slowly down the slope. Always drive smoothly and slowly on slopes. Do not make any sudden changes in speed or direction. Avoid unnecessary turns on slopes, if necessary, turn slowly and gradually downwards if possible. Drive slowly. Do not turn the wheel sharply. Rider 11: Select a low gear so that you will not need to stop to change gear. The machine engine-brakes even better in low gear. Watch out for and avoid driving over furrows, holes and bumps. It is easier for the machine to overturn on uneven ground. Tall grass can hide obstacles.
Use hearing protection to minimise the risk of hearing impairment.
Never wear loose tting clothes that can catch in moving parts. Never use the machine when barefoot. Always wear protective shoes or protective boots, preferably with steel toes.
Make sure that you have rst aid equipment close at hand when using the machine.
Do not mow too close to edges, ditches or banks. The machine can suddenly overturn if one wheel comes over the edge of a steep slope or a ditch, or if an edge gives way. Do not mow wet grass. It is slippery, and tyres can lose their grip so that the machine skids. Do not try to stabilize the machine by putting your foot on the ground. When cleaning the chassis, the machine may never be driven near verges or ditches. When mowing, keep away from bushes and other materials in order to avoid a heating effect.

If leaks arise in the fuel system, the engine must not be started until the problem has been resolved. Store the machine and fuel in such a way that there is no risk that leaking fuel or fumes can cause any damage. Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overow. Avoid overlling. If you spill petrol on the machine, wipe up the spill and wait until it has evaporated before starting the engine. If you spill on your clothing, change your clothing. Allow the machine to cool before performing any actions in the engine compartment. WARNING! The battery contains lead and lead pollutants, chemicals that are considered to cause cancer, birth defects or other reproductive impairment. Wash your hands after touching the battery.
Be particularly careful near corners, bushes, trees or other objects that block your view.

Maintenance

Stop the engine. Prevent starting by removing the ignition cable from the spark plug or remove the ignition key before making any adjustments or carrying out maintenance. Never ll the fuel tank indoors.
Be especially careful when handling battery acid. Acid on the skin can cause serious corrosive injuries. In the event of spillage on the skin wash immediately with water. Acid in the eyes can cause blindness, contact a doctor immediately.
Take care with battery maintenance. Explosive gases form in the battery. Never perform maintenance on the battery while smoking or in the vicinity of open ames or sparks. This can cause the battery to explode and cause serious injuries. Reduce the risk of re by removing grass, leaves and other debris that may have fastened on the machine. Allow the machine to cool before putting it in storage.

Transport

Make sure all nuts and bolts are tightened correctly and that the equipment is in good condition. Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven if protective plates, protective covers, safety switches or other protective devices are not tted or are defective. Observe the risk of injury caused by moving or hot parts if the engine is started with the engine cover open or protective cowlings removed. Do not change the setting of governors and avoid running the engine at excessively high revs. If you run too fast, you risk damaging the machine components. Never use the machine indoors or in spaces lacking proper ventilation. Exhaust fumes contain carbon monoxide, an odourless, poisonous and highly dangerous gas. IMPORTANT INFORMATION The parking brake is not sufcient to lock the machine during transport. Ensure you secure the machine rmly to the transporting vehicle. The machine is heavy and can cause serious crush injuries. Take extra care when loading it onto or off a vehicle or trailer. Use an approved trailer to transport the machine. Activate the parking brake, and secure the machine using approved fasteners, such as tension belts, chains or ropes when transporting. Check and observe local road trafc regulations before transporting or driving the machine on roads.

The lever can also be used to temporarily regulate the cutting height, e.g. for a small mound in the lawn.
WARNING! Petrol is highly inammable. Exercise care and refuel outdoors (see safety instructions).
IMPORTANT! Do not use the fuel tank as a support area.
Release lever Rider 13 C, Rider 16 C
The release control must be pulled out in order for the machine to be moved when the engine is shutoff. Pull the controls to the end positions, do not use an intermediate position.
Pull out the control to disengage the drive system. Push in the control to engage to the drive system.
Release lever Rider 16 AWD
Rider 16 AWD has one control for the front axle and one control for the rear axle. Should you attempt to drive the machine with the clutch controls pulled out it will not move. The drive on the axle is disengaged when one of the controls is pulled out. IMPORTANT! Always drive the machine with both clutch controls pressed in.
Clutch control, rear axle
Control drawn out, drive system disengaged. Control depressed, drive system engaged.
Clutch control, front axle
The control is positioned on the inside of the left front wheel.
Rear control (pulled out), drive system disengaged. Front control (pushed in), drive system engaged.

14 English

Driving

Before starting

IMPORTANT! The air intake grille in the engine cover behind the drivers seat must not be blocked by, for example, clothing, leaves, grass or dirt. Impaired cooling of the engine. Risk of major engine damage. - Release the brake pedal while holding the button pressed. The parking brake lock disengages automatically when the brake pedal is pressed. Rider 11R and Rider 11 C have the brake pedal and release button on the right-hand side. Rider 16 AWD The engine can not be started if the parking brake is not pressed down. 4 Rider 11R and Rider 11 C Put the gear shift lever in the N position (neutral).
Read the safety instructions and information concerning the placement of controls and functions before starting. Perform daily maintenance before starting as set out in the Maintenance schedule. Adjust the seat to the required position. IMPORTANT INFORMATION Do not press down the reversing block button on the lever when neutral position is engaged. Otherwise this will activate the start lock function. With a cold engine: 5 Move the throttle to position 3 (choke position). In this position the engine is fed with a richer mixture, which means the engine is easier to start.

Start the engine

1 Make sure that the clutch control is depressed. (Run position) Rider 16 AWD has one control for the front axle and one control for the rear axle.
Lift up the cutting unit by pulling the lever backwards to its locked position. With a warm engine: 6 Move the throttle in between positions 1 and 2.
Activate the parking brake. This is done as follows:
- Press down the parking brake pedal (1). - Press in the lock button (2) on the steering column.
7 Turn the ignition key to the start position.
Connecting the jump leads
IMPORTANT INFORMATION If the engine does not start, wait about 15 seconds before trying again. If the engine does not start wait about 1 minute before trying again. 8 When the engine starts release the ignition key immediately back to neutral position. Connect each end of the red cable to the POSITIVE pole (+) on each battery, exercise care not to short circuit any of the ends against the chassis. Connect one end of the black cable to the NEGATIVE pole (-) on the fully charged battery. 9 Push the choke lever gradually forward when the engine has started. Let the engine run at moderate speed or half throttle for 3-5 minutes before subjecting it to heavy load. Connect the other end of the black cable to a good CHASSIS EARTH, away from the fuel tank and the battery.
10 Set the required engine speed with the throttle control. WARNING! Never run the engine indoors, in enclosed or poorly ventilated areas. The exhaust fumes contain toxic carbon monoxide.
Remove the cables in the reverse order
The BLACK cable is removed from the chassis and then the fully charged battery. Finally the RED cable from both batteries.

Driving the Rider

1 Release the parking brake by rst pressing down the parking brake pedal and then releasing it.
Starting the engine with a weak battery
WARNING! Lead-acid batteries produce explosive gases. Avoid sparks, open ames and smoking close to batteries. Always wear protective glasses in the vicinity of batteries. 2 For Rider 13 C, Rider 16 AWD and Rider 16 C Carefully press down one of the pedals until the required speed is obtained. Pedal (1) is used to drive forwards, and pedal (2) to drive backwards.
If the battery is too weak to start the engine, it should be recharged. When jump leads are used for emergency starting, follow the procedure below: IMPORTANT INFORMATION Your Rider is equipped with a 12-volt system with negative earth. The other vehicle must also have a 12volt system with negative earth. Do not use your Rider battery to start other vehicles.

The steering is controlled by means of wires. These can in time become slack, which implies that the adjustment of the steering becomes altered. Check and adjust the steering as follows: 1 Remove the frame plate by loosening the screws (2) and lift the frame plate by the rear edge.

20 English

2 Check the tension of the steering wires by squeezing them together by the arrows as illustrated. It should be possible to push them together so that the distance between them is half as much, without using unnecessary force. 2 Tension the cable with the adjuster screw (2) so that the distance between the brake lever and front edge of the cut-out on the chassis is 1 mm (0.040). Tighten the locking nuts (1) after adjustment.
Adjusting the parking brake Rider 13 C, Rider 16 C
Check that the brake is correctly adjusted by placing the machine on a slight downhill slope with the clutch disengaged and activating the brake. 3 If necessary, the wires can be adjusted by tightening the adjuster nuts on each side of the steering collar. Do not over tighten the cables; they should only be drawn in towards the steering collar. When the machine does not stand still, the brake should be adjusted according to the following.
Hold the cable, for example using an adjustable wrench, so that it does not twist. If you only tension one side the steering wheels centre position may change. Check the wire tension on completion of the adjustment as per item 2. 3 4
Loosen the locking nuts (1). Tension the cable using the adjuster screw (2) until the play in the cable is taken up. Tighten the locking nuts (1). The brake should be checked again after adjustment WARNING! A poorly adjusted brake can result in reduced braking ability.
Checking the brake Rider 11 R and Rider 11 C
The brake is a disc brake and is located on the gearbox. Check that the brake is adjusted correctly by measuring the distance between the brake lever and front edge of the cut-out on the chassis. The distance should be 0-1 mm (0-0.040') when the brake is not actuated.
Adjusting the parking brake Rider 16 AWD
Check that the parking brake is adjusted correctly by placing the machine on a slope with the front and rear axles disengaged. Apply and lock the parking brake. When the machine does not stand still, the parking brake should be adjusted according to the following. 1 Remove the left-hand wing cover.
Adjusting the brake Rider 11R and Rider 11 C
Loosen the locking nuts (1).
Tension the cable using the adjuster screw (2) until the play in the cable is taken up.
5 Tighten the locking nuts (1). The brake should be checked again after adjustment Assemble the left-hand wing cover. WARNING! A poorly adjusted parking brake can result in reduced braking ability. 2 Pull up the handle on the air lter cover, unhook and turn towards the engine.

Adjusting the throttle wire
The throttle cable may need to be adjusted, if the engine does not respond as it should when accelerating, if it produces black smoke or maximum revs are not reached. 1 Release the clamping screw that secures the wire casing and set the choke control to maximum choke.
Remove the air lter cover. Lift out the air lter cartridge from the fan housing.
Replace the air lter cartridge, if clogged with dirt.
IMPORTANT INFORMATION 2 Pull the choke wire casing to the far right and tighten the clamping screw. Do not use compressed air to clean the paper lter. Do not oil the paper lter. They must be tted dry. 6 Carefully lift the precleaner out of the fan housing.
Pull back the throttle to the full throttle position and check that the choke is no longer actuated.
Carefully clean the fan housing so that dirt does not fall down into the carburettor. Insert a new precleaner and air lter cartridge in the fan housing. Align the tabs on the cover with the slits in the housing and replace the air lter cover.

Replacing the air lter

If the engine seems to lack power or does not run smoothly this may be because the air lter is clogged. It is therefore important to replace the air lter at regular intervals (see Maintenance/Maintenance Schedule for the correct service interval). Replace the air lter as follows: 1 Open the engine cover.
10 Pull the handle outwards. Secure the handle in the air lter cover and close the cover by pressing it inwards.

22 English

Replacement of fuel lter
Replace the fuel lter every 100 running hours (once per season) or more frequently if it is clogged. IMPORTANT INFORMATION Fitting the wrong spark plug type can damage the engine.

Replacing the spark plug

3 Replace the lter as follows: Open the engine cover. Move the hose clips away from the lter. Use a pair of at pliers. Pull off the lter from the hose ends. Press the new lter into the ends of the hoses. If necessary apply liquid detergent to the ends of the lter to facilitate connection. Push the hose clips back on the lter and tighten. 4 Remove the ignition cable shoe and clean around the spark plug. Remove the spark plug with a 5/8 (16 mm) spark plug socket wrench. Check the spark plug. Replace the spark plug if the electrodes are burned or if the insulation is cracked or damaged. Clean the spark plug with a steel brush if it is to be reused. Measure the electrode gap with a gapping tool. The gap should be 0.75 mm/0.030. Adjust as necessary by bending the side electrode. Reinsert the spark plug, turning by hand to avoid damaging the threads.
IMPORTANT INFORMATION Inadequately tightened spark plugs can cause overheating and damage the engine. Tightening the spark plug too much can damage the threads in the cylinder head. 6 Tighten the spark plug, once it touches the seating, with the spark plug spanner. Tighten the spark plug so that the washer is compressed. A used spark plug should be turned 1/8 of a turn from the seated position. A new spark plug should be turned a 1/4 turn from the seated position. Replace the ignition cable shoe.

The dipstick should be completely screwed down Pull the dipstick out again and read the oil level. The oil level should be between the markings on the dipstick. If the level is approaching the ADD mark, top up the oil to the FULL mark on the dipstick.

ADD FULL

Checking the oil level in the transmission on Rider 13 C, Rider 16 AWD and Rider 16 C
1 Remove the transmission cover. Undo the two screws (one on each side) and lift off the transmission cover.
The oil is topped up through the hole the dipstick sits in. Fill the oil slowly. Tighten the dipstick correctly before starting the engine. Start and run the engine at idling speed for approx. 30 seconds. Turn off the engine. Wait 30 seconds and check the oil level. If necessary ll so that the oil comes up to the FULL mark on the dipstick. First and foremost use synthetic engine oil class SJ-CF 5W/ 30 or 10W/30 for all temperature ranges. Mineral oil SAE30, class SFCC can be used at temperatures > +5 C (40 F) Do not mix different types of oil. 2
Rider 13 C and Rider 16 C Check that there is oil in the transmissions oil tank. Fill if necessary with engine oil SAE 10W/40 (class SFCC). Rider 16 AWD Check that there is oil in the transmissions oil tank. Fill if necessary with engine oil SAE 10W/40 (class SFCC).

Replacing the engine oil

The engine oil should be changed the rst time after 5 hours running time. It should then be changed after every 50 hours of running time. When operating with a heavy load or at high ambient temperatures, replace every 25 hours. WARNING! Engine oil can be very hot if it is drained directly after stopping the engine. Allow the engine to cool somewhat rst.
Place a container underneath the engines left oil drain plug. Remove the dipstick. Remove the drain plug from the engines left side.
The oil and lter should be changed by an authorised service representative, as described in the Workshop Manual. Work on the system entails particular demands on cleanliness and the system must be vented before the machine is used.
Let the oil run out into the container.
Lubricating the belt adjuster
The belt adjuster should be lubricated regularly using good quality molybdenum disulphide grease*. Lubricate using a grease gun, 1 nipple from the right-hand side under the engines lower belt pulley, until grease is forced out.

There is a cover to protect your machine during storage or transport. Contact your dealer for a demonstration

32 English

TECHNICAL DATA
Rider 11 C Dimensions Length with cutting unit, mm/ft Width with cutting unit, mm/ft Height, mm/ft Operating weight with cutting deck, kg/lb Wheel base, mm/ft Track width, front, mm/ft Track width, rear, mm/ft Tyre dimensions Air pressure, rear - front, kPa / bar / PSI Max. gradient Engine Brand / Model Nominal engine output, kW (see note 1) Displacement, cm3/cu.in Max.motor speed, r/min Fuel, minimum octane grade lead-free Fuel tank capacity, litre Oil synthetic, class SJ-CF Oil tank capacity, litre/USqt Starting Electrical system Type Battery Spark plug Electrode gap, mm/inch Main fuse Noise emissions and cutting width (see note 2) Sound power level, measured dB(A) Guaranteed noise level Cutting width, cm/inch Sound power level (see note 3) Sound pressure level at the operators ear, dB(A) Vibration levels (see note 4) Vibration level on the steering wheel, m/s2 Vibration level in the seat, m/s2 Transmission Brand Oil, class SF-CC Number of forward gears Number of reverse gears Forward speed, km/h. Reverse speed, km/h Cutting unit Type Cutting heights, 7 positions, mm/inch Blade length, mm/inch 2220/7,29 1000/3,29 1070/3,52 226/497 887/2,9 712/2,34 627/2,06 165/60-(0,6/8,5) 10 Briggs & stratton/2158 6,SAE 5W/30 or SAE 10W/30 1,4/1,5 Electric starter Rider 13 C 2220/7,29 1000/3,29 1070/3,52 232/511 887/2,9 712/2,34 627/2,06 165/60-(0,6/8,5) 10 Briggs & Stratton/2198 6,SAE 5W/30 or SAE 10W/30 1,4/1,5 Electric starter Rider 16 AWD 2220/7,29 1000/3,29 1070/3,52 252/556 887/2,9 712/2,34 627/2,06 165/60-(0,6/8,5) 10 Briggs & Stratton/31A6 9,SAE 5W/30 or SAE 10W/30 1,4/1,5 Electric starter
12 V, negative earthed 12 V, negative earthed 12 V, negative earthed 12 V, 24 Ah 12 V, 24 Ah 12 V, 24 Ah Champion QC12YC Champion QC12YC Champion QC12YC 0,75/0,030 0,75/0,030 0,75/0,030 Spade connector, 7.5 A Spade connector, 7.5 A Spade connector, 7.5 A
2,5 0,7 Peerless MST205 SAE 80W/1 0-9 0-3 CombiClip 94 25-75/0.98-2.95 358/14.09
2,5 0,7 Tuff Torq SAE 10W/30 0-9 0-6 CombiClip 94 25-75/0.98-2.95 358/14.09
2,5 0,7 Tuff Torq SAE 10W/40 0-9 0-6 CombiClip 94 25-75/0.98-2.95 358/14.09
Note 1: The power rating of the engine indicated is the average net output (at specied rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the nal machine will depend on the operating speed, environmental conditions and other values. Note 2: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A). Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s2 (steering wheel) and 0.8 m/s2 (seat).

Rider 16 C Dimensions Length with cutting unit, mm/ft Width with cutting unit, mm/ft Height, mm/ft Operating weight with cutting deck, kg/lb Wheel base, mm/ft Track width, front, mm/ft Track width, rear, mm/ft Tyre dimensions Air pressure, rear - front, kPa / bar / PSI Max. gradient Engine Brand / Model Nominal engine output, kW (see note 1) Displacement, cm3/cu.in Max.motor speed, r/min Fuel, minimum octane grade lead-free Fuel tank capacity, litre Oil synthetic, class SJ-CF Oil tank capacity, litre/USqt Starting Electrical system Type Battery Spark plug Electrode gap, mm/inch Main fuse Noise emissions and cutting width (see note 2) Sound power level, measured dB(A) Guaranteed noise level Cutting width, cm/inch Sound power level (see note 3) Sound pressure level at the operators ear, dB(A) Vibration levels (see note 4) Vibration level on the steering wheel, m/s2 Vibration level in the seat, m/s2 Transmission Brand Oil, class SF-CC Number of forward gears Number of reverse gears Forward speed, km/h. Reverse speed, km/h Cutting unit Type Cutting heights, 7 positions, mm/inch Blade length, mm/inch 2220/7,29 1000/3,29 1070/3,52 232/511 887/2,9 712/2,34 627/2,06 165/60-(0,6/8,5) 10 Briggs & Stratton/31A6 9,SAE 5W/30 or SAE 10W/30 1,4/1,5 Electric starter 12 V, negative earthed 12 V, 24 Ah EMS Q 0,75/0,030 Flat pin, 15 A.
Note 1 The power rating of the engine indicated is the average net output (at specied rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the nal machine will depend on the operating speed, environmental conditions and other values. Note 2: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC. Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A). Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s2 (steering wheel) and 0.8 m/s2 (seat).

34 English

z+S!|6 z+S!|6
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specications and designs without prior notice so as to implement improvements. Note that no legal claims are valid on the basis of information in this manual. Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.

 

Tags

SHR-2040P250 Cisco 7911 CQ-VX2200 OFX 1200 Syncmaster 793V Legend KS-FX950R LE40R82B Compact 330 DS-65 TLU-02041B XR-P470C PCG-F270 IC-706mkiig Starter Kits ICD-P17 SR224G 1610XI DKS-6100 MC-220 T-levo N22 Ideacentre B310 Control R50 DCC-NWC1 AV260CP ADV350 Hipath 3350 MYX-5 Rifle C-220zoom HT-C455 RM-TP503 PDR-05 PS42B451b2wxxc Samsung 191T Zenithstar 66 DTC-975BKN FP T6-1 XR-C2600 110 IS KX-T7533NE Korg AX3A LVP-X100A 8410D CQ-VD6503N Madrigal 32LC56 AEU XV315P TXL37S20E Systems Teleflash Plus S LAC-M1500 LE32R75B Bass 2007 DSC-W310 P 42C96HD GX-20 775I65GV YP-S5 F5U251 SSC130B Seiko 5J22 ICF-C1200 Roland D-5 RS-1200 SE1501B 53 LG U310 Review RCR 127 D-NF430 HK 675 Dista T500 Perfecta T37800 - 550 Siemens M35 DMC-FS15 C12AWR Su0 Taiwan KM-2050 SCR-187 Aekqlvg CQ-DFX444 With USB TL-WR941N RM-VZ220 18-2 G23 DS8421P AVR-1909 LP32-TDR1 XR-CA430X M2762D 9 1 Alivesata2-glan Server HT963SA 32PC54 Bonne Paye Scpt170 Server

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101