Users Manual

Digital Common Interface Satellite Receiver

HSS-830HCI

HYUNDAI DIGITAL TECHNOLOGY Co.,LTD.
Home Page : www.hdt.co.kr E-mail : khchang@hdt.co.kr reck@hdt.co.kr yisang94@hdt.co.kr
HYUNDAI DIGITAL TECHNOLOGY EUROPE GnbH.
Home Page : www.hdte.de E-mail : bksohn@hdte.de spencer@hdte.de info@hdte.de
HYUNDAI DIGITAL TECHNOLOGY
1. Introduction 1.1. Overview 1.2. Main Features 2. Safety/Precautions 2.1. Safety 2.2. Precautions 3. Check Point before Use 3.1. Accessories 3.2. The Satellite dish 4. Controls/Functions 4.1. Front Panel 4.2. Rear Panel 4.3. Remote Controller 5. Using Remote Controller 5.1. Batteries 5.2. Range Of Operation 6. How to Connect 7. Operation 7.1. Getting Started 7.2. Channel Editing 7.3. System Parameters 7.4. Transponder 7.5. Factory Set 7.6. Other Function on Remote Control 8. Hard Disk Operation 8.1. Recording 8.2. Playing 8.3. Delete Programs 8.4. Lock Programs 8.5. Skip Play 8.6. Split Operation 8.7. Trick Play Controls without OSD 9. Conditional Access 10. Trouble Shooting 11. Specifications DiSEqC is a trademark of EUTELSAT.
This Common Interface is your Window to the World giving you the opportunity to enjoy scrambled programs. Enjoy the rich choice of more than 4,000 different channels, broadcasting a large range of culture, sports, cinema, news, events, etc. This receiver is a technical masterpiece, assembled with the highest qualified electronic parts.
Fully compliant with MPEG-2 and DVB standards Integrated COMMON INTERFACE Multi-access with twin card reader for CI User friendly operating Menu and On-Screen Graphic Menu Easy to use EPG(Electronic Program Guide) on screen Age protection lock function Tele-text encoding Manual PID control Software downloading via RS-232C connector DiSEqC 1.2 compatible Hard Disk Functions
Be sure to read the user's manual before starting the operation of the unit.
Do not touch the power cord with wet hands as it may cause electric shock.
Never open the cover. It is very dangerous to touch the inside of the unit due to possible electric shock.
Place the unit in a well ventilated and no-heat environment.
When you do not use this unit for a long time, make sure that power cord is pulled out from the outlet. Also do not use a damaged power cord as it may cause fire or electric shock.
A professional installation is required. If reception is interrupted, contact your local service centre.

When installing the unit

Install the unit horizontally. An uneven installation may cause the unit to be damaged.
Do not put heavy items such as a TV on the unit. That may cause the unit to be damaged.

Do not install the unit:

Where it is subject to vibrations Where it is exposed to direct sunlight Where there is humidity Where the temperature is too high or too low. Where there is no ventilation
Moving the unit to a hot area from a cold one will cause condensation. Do not operate the unit for one or two hours or until it has dried completely.

Accessories of the Unit

User's manual : 1

l ua an sm er' Us

Remote control : 1
Batteries (AAA type) : 2 If any accessories listed above are missing, contact the sales representative where you purchased this unit.
Your dish should be properly installed and azimuth and elevation must be precisely set up. This unit is working with DiSEqC 1.2 on a compatible antenna positioner. Ask your dealer for information.
Power To switch the receiver in standby mode or in power on mode. Standby/Power on Indication light Flashing red in standby and no light in power on mode. Remote Sensor Receives the infrared signal from remote control. Channel Display(4 Digit) - When you connect the power line of the receiver, the current time is displayed. - After programming, the program number or name is displayed. Menu To launch or terminate the menu application. Select To activate a highlighted item or go to next level on hypertext menu or confirm the user s action.

LNB Configuration

and press
Amos Thor PAS 4 AsiaSat 2 USER1 USER2 USER3 USER4

G L -Page Up/Down,

AsiaSat 2 Position High L.O. Low L.O. Power 0/22KHz DiSEqC 000.0 5,150 GHz 0 GHz ON 0 KHz ----
If you press , the selected Satellite will be added and the cursor will move to right window for detailed installation. Note : If you just want to edit the data of the satellite which is already contained in the receiver, press after you select the satellite. Select item you want to edit with or and change each parameter. - Position : You can input the longitude of the satellite with numeric keys. - High L.O. / Low L.O. : Enter LNB oscillator frequency with numeric keys. - Power : Set LNB power ON or OFF with or. or. - 0/22KHz : Set the path of 0/22KHz switch box with - DiseqC : Set the path of DiSEqC box with or If you do not use the switch box, set as - - - .
Note : When you change each parameter, you need to know exact parameter of LNB to modify L.O.(local oscillator) frequency. Note : When you change each parameter, you need to understand environment of connecting the receiver and antenna in order for you to set 22KHz and DiSEqC properly. When necessary, you can change a satellite name as you wish. You can enter alphabetic characters with the numeric keys. For example, if you want to enter 'SAT-1', Press Note : Press for space.
After the installation procedure, press EXIT key or MENU key to store your entered data.

Antenna Setup

You need to position your antenna correctly for reception of the best signal. Press MENU key. Select Installation with Screen

, and press

Select Antenna Setup with Screen

Tuner FEC Level

Lock 3/4 Qual.
ASIA3 [7] 3,710 GHz Motor / Goto 0 Move / Save Set Limit My longitudo My latitudo
Vertical - 14V 3,300 MSPS Off Stop Disable 000.0 00.0

-Main, -Prev.

Level Quality
Indicating selected satellite signal strength level Indicating signal to noise ratio
Select the satellite you want with Press.
to move to TP section and select the TP you want with
When the satellite and the TP are selected, you can check the reception status of the satellite signal. If the reception signal status is bad, adjust antenna to get the following result. Tuner FEC Level Quality Lock 1/2, 2/3, 3/4, 5/6 or 7/8 over 30% over 10%
DiSEqC 1.2 Positioner Setting - Motor / Goto 0 Determine the kind of Motor & whether or not controlling it by using or. On Off Using DiSEqC Motor. Not using DiSEqC Motor. Using the specific Motor supplied by Stab company. Determine the longitude of the satellite on LNB Configuration Menu. If the longitude of the satellite on LNB Configuration Menu is setted, user must input the longitude about your position at present , DiSEqc Motor will move toward Zero Equator.

-Page Up/Down, -Watch, -Main,
AsiaSat 2 [24] 4,000 GHz Horizontal-18V 28,123 MSPS Deutsche Well FAV. LOCK MOVE DEL ADD MODE

-EXIT, 0 ~ 9 -Move

In the right section, detailed information of the selected channel will be displayed.(Name of satellite, frequency, symbol rate, etc.) Select the channel you want with (page up/down). / (scroll up/down) or /.
When the scroll bar is positioned on the channel you want to see, press

Volume Control

While you are watching a program, press Screen or.
When necessary, press MUTE key to remove the sound of the program temporarily. Then, your receiver goes into mute condition and the volume bar will become red. Press MUTE key again to turn the sound on.

Favorite Channel

You can set up favorite channel lists as you want. For example, if you want to set favorite channel lists as following. Favorite1 : 7 DWtv, 6 Hunan1 Favorite2 : 1 Fujian1 Favorite3 : 3 ANHUI TV, 5 Guangdong1 Firstly, set favorite1 channels. Press CH.LIST. Select 'DWtv' channel with Screen

Press RED. Screen

All List 7 8

Favorite State

Fujian 1 Favorite 1 DIGITL VID Favorite 2 ANHUI TV Favorite 3 NMCHTV Guangdong Favorite Hunan 1 DWtv Favorite 5 MCM

-Select, / -Exit

AsiaSat 2 [24] 4,000 GHz Horizontal-18V 28,123 MSPS Deutsche Well FAV. LOCK DEL ADD MODE

Rename.

Select favorite1 with Screen

and Press

AsiaSat 2 [24] 4,847 GHz Horizontal-18V 28,123 MSPS Dban FAV. LOCK DEL ADD MODE

-Exit, 0 ~ 9 -Move

Do the same for the 'Hunan 1' channel. Screen
AsiaSat 2 [20] 3,847 GHz Horizontal-18V 4,420 MSPS Hunan FAV. LOCK MOVE DEL ADD MODE

Screen

Favorite1 ~ Favorite5 are default name. Users can rename them for their convenience. If you want to rename 'Favorite1' (for example 'Drama'). Press RED. Screen
Select Favorite 1 with Screen

Press IVORY. Scree

AsiaSat 2 [24] 4,830 GHz Horizontal-18V 28,123 MSPS HTV1 FAV. LOCK DEL ADD MODE

TV/SAT LED ON OFF

Power ON TV ANT IN signal will be out. Decoded signal will be out through RF.
Power OFF TV ANT IN signal will be out.
Fujian 1 DRAMA DIGITL VID Favorite 2 ANHUI TV Favorite 3 NMCHTV Guangdong Favorite Hunan 1 DWtv Favorite 5 MCM
AsiaSat 2 [24] 4,000 GHz Horizontal-18V 28,123 MSPS he Well FAV. LOCK DEL ADD MODE

Press MENU, EXIT or

to finish the process.
You have finished favorite1 channel setting. With similar way, you can set favorite2 ~ favorite5 channel list. You can use these favorite channel lists by using ORANGE key. Refer to the next section for detail.

Channel List Mode

Using this function, you can see variant channel lists which may enable you to edit and select channels more conveniently.

Favorite Mode

If you have set up favorite channel lists as the previous section, you can use them as following. Press CH.LIST. Screen

Press ORANGE. Screen

AsiaSat 2 All List Channel List Mode [20] 3,847 GHz Fujian 1 Free+Scrambled Horizontal-18V DIGITL VID Favorite 1 4,420 MSPS ANHUI TV Favorite Hunan NMCHTV Satellite AsiaSat 2 Guangdong 1 A A B Alphabet FAV. DEL Hunan 1 DWtv MCM

LOCK MOVE

ADD MODE
You can see 'Channel List Mode' window. Select 'Favorite' with and select 'Favorite1' with or. Screen

Favorite 1 Hunan 1 DWtv

-Watch,
You can see only favorite1 channels are listed. With similar way, you can see favorite2 ~ favorite5 channel list. If you want to return to all channel list (all channels of the selected satellite), press ORANGE and select 'Satellite' with / and press. Screen

D DIGITL VID DWtv

Channel List Mode Free+Scrambled Favorite Satellite
AsiaSat 2 [24] 4,000 GHz Horizontal-18V Favorite 1 28,123 MSPS AsiaSat 2 Deutsche Well D FAV. LOCK MOVE DEL ADD MODE

Alphabet

Alphabet Mode
Using this function, you can see the channel list which have same initial. This function is useful when you search specific channel among the list of thousands channels. For example, if you want to see the channel lists which start with 'D'. Press ORANGE in the channel list and select 'Alphabet' with Screen
AsiaSat 2 All List Channel List Mode [20] 3,000 GHz Fujian 1 Free+Scrambled Horizontal-18V DIGITL VID Favorite 1 4,420 MSPS ANHUI TV Favorite Hunan NMCHTV Satellite AsiaSat 2 Guangdong 1 A A B Alphabet FAV. DEL Hunan 1 LOCK ADD DWtv MCM

Select 'D' with Screen

AsiaSat 2 All List Channel List Mode [20] 3,000 GHz Fujian 1 Free+Scrambled Horizontal-18V DIGITL VID Favorite 1 4,420 MSPS ANHUI TV Favorite Deutsche Well NMCHTV Satellite AsiaSat 2 Guangdong 1 A D B Alphabet FAV. DEL Hunan 1 LOCK ADD DWtv MCM
You can see the channel list where all channels have initial 'D'.

Free only Mode

Press ORANGE in the channel list and select first line with Select 'Free only' with /. Screen
AsiaSat 2 All List Channel List Mode [20] 3,000 GHz Fujian 1 Free+Scrambled Horizontal-18V DIGITL VID Favorite 1 4,420 MSPS ANHUI TV Favorite Hunan NMCHTV Satellite AsiaSat 2 Guangdong 1 A A B Alphabet FAV. DEL Hunan 1 LOCK ADD DWtv MCM MOVE MODE

Select 'Favorite' or 'Satellite' or 'Alphabet' and press the selected 'free' channel list.

. You can see only

Free + Scrambled Mode
Press ORANGE in the channel list and select first line with Select 'Free+ Scrambled' with /. Screen
All List Channel List Mode Fujian 1 Free+Scrambled DIGITL VID DRAMA ANHUI TV Favorite NMCHTV Satellite AsiaSat 2 Guangdong 1 A A B Alphabet Hunan 1 DWtv MCM
AsiaSat 2 [20] 3,20 GHz Horizontal-18V 4,420 MSPS Dian FAV. LOCK MOVE DEL ADD MODE
Select 'Favorite' or 'Satellite' or 'Alphabet' and press selected free and scrambled channel list. Screen

. You can see the

Note : 'Scrambled' channel can be shown only with CI (Common Interface) model and CAS (Conditional Access System) model. 'Free' channel can be shown with all (FTA(Free To Air) and CI and CAS) model.

Satellite Mode

By using this function, you can see all channel list of the selected satellite. Press ORANGE and select Satellite item with Screen
to select a satellite and press

Lock Channel

This menu enables you to prevent children from viewing programs unsuitable for their age. Press CH.LIST and Select the channel you want to lock with or and press GREEN. Then the selected channel is locked. Screen
Note : If password' window is risen as following picture, enter password with numeric keys (default password is' 0000'). Then you can lock the channel. If you don't want this window, change Parental Control' set up in the System Parameters' menu. Refer to the Parental control' in System parameters' in this manual for detail. Screen
All List Fujian 1 NMCHTV RAI Guangdong 1 Hunan 1 MCM DWtv TVE
AsiaSat 2 [24] 4,000 GHz Horizontal-18V 28,123 MSPS Deutsche Well FAV. LOCK MOVE

DEL ADD MODE

AsiaSat 2 [24] 4,000 GHz Horizontal-18V << Authorized! >> 28,123 MSPS Deutsche Well FAV. LOCK MOVE

-Watch, -Main, /

Without entering your password, you cannot watch a locked channel's program. Screen

AsiaSat DWtv

14:14 In Focus 13:56 ~ 14:26
If you want to cancel the channel lock, go to the channel list and select the channel and press GREEN.

Channel Order Setting

You can organize the number or sequence of the channels. Press CH.LIST. Screen
All List Jiangxi 1 Jiangxi 2 LNTV WNS MEA LON SATLINK APTN1 +442074 NMTV Guangdong 1
AsiaSat 2 [9] 3,773 GHz Horizontal-18V 5,632 MSPS Reuters Londo FAV. LOCK MOVE
Select the channel you want to move with press YELLOW. Screen
All List RAI Internati TVE TV5-Asia RTPi uoH-u1/4x CS F>>x ET DoZx USTV-I o>>x JET

-Page Up/Down, -Watch,

and enter the alphabetic characters
For example : if you want to enter SAT-1,

Note : Press

for space key and enter the proper value with
Move to 'VIDEO PID' by pressing numeric keys. Move to 'AUDIO PID' by pressing numeric keys. Move to 'PCR PID' by pressing 0000~8192 with numeric keys.
key and enter the proper value with
key and enter the value between
Note : The above mentioned TP Frequency, Symbol Rate, VIDEO PID, AUDIO PID, PCR PID are very important for optimal satellite signal reception. We recommend you get professional advice where available. You cannot setup VIDEO PID for RADIO channels.

Setting Age Restrictions

This sub-menu allows you to set the age for parental locking and protect children from viewing programs unsuitable for their age. Press MENU key. Press Screen

System Parameters

to select 'System Parameters' and press
Parental Control System Information Local time/Timer DL Saving TV Type Aspect Ratio Screen

-Next, /

18/07/2001 16:37 A/V Mode Y/C

No PAL 4X3 P/S

Press Screen
to select 'Parental Control' and press
Parental ControlPASSWORD System Information ???? Local time/Timer DL Saving TV Type Aspect Ratio Screen
19/06/2001 11:57 A/V Mode Y/C
Enter 4-digit password. Note : The default password is '0000' Screen
Parental ControlPASSWORD System Information

A/V Mode Y/C

19/06/2001 11:58 Local time/Timer Authorized! >> << DL Saving TV Type Aspect Ratio Screen

to select Age Limit.

Parental Control
Age Limit Lock Channel Editing Lock Installation New Password Verify Password Personal

None No No ???? ????

Press None 15 18
to select age you want. No age limit Without entering password, programs are restricted to those who are over 8 years old. over 12 years old. over 15 years old. over 18 years old.
Note : Age limit can be applicable only for the signal which carries age limit information.

0 ~ 9 -Edit,

18/07/2001 16:40 A/V Mode Y/C

-Next, / -Prev.

to select Local Time/Timer, and press
Note : Without the local time setting, this TIMER function does not work. Screen
18/07/2001 16:40 Timer #1 Timer #2 Timer #3 Timer #4 Timer #5 Timer #6 Timer #7

-Edit,

CH. Type CH. Number CH. Name Start Time Stop Time Status HD record
TV 1 Fujian 1 18/07/2001 16:42 18/07/2001 17:42 No ON
to select Timer #(number) you want to set and press or.
determine 'CH. Type' by selecting 'TV' or 'RADIO' with
Select 'CH. Number' with numeric keys or with or
and enter channel number with
Select Start Time for your receiver power-on. For example : For 1st of February in the year of 2000, 7:30 P.M., Enter in sequence Select Stop Time by pressing. Enter power off time in the same way as you entered Start Time Select Status and set Once/Daily/Weekly/No with or. Select HD record and set ON with or if you want to record auto matically. Note : 1. Without STATUS being actuated (ON), Timer does not work. 2. If Prior time than current is entered, Timer does not work. 3. You can pre-set 14 TIMERs simultaneously. Regardless of number of TIMER, Timer will work in sequence of time sequence. 4. Remocon Key doesnt work while VCR recording.(While HDD recording, remocon key works)
Setting Day Light Saving Time (Summer Time)
You can adjust current local time when summer time is applicable. Press MENU key. Press Press Press Yes No or or or to select System Parameters, and press to select DL Saving. to select Yes or No.
Set for daylight saving function activated The current time automatically moves one hour ahead Set for daylight saving function deactivated The current time automatically moves on hour behind
Note : Without current local time setting, this menu cannot be processed.

Setting TV Type

You can set your TV display mode with this sub-menu. Press MENU key. Press Press Press Multi PAL NTSC or or or to select System Parameters, and press to select TV Type. to select Multi, PAL, or NTSC. When your TV is compatible with NTSC/PAL dual mode. When your TV is only for PAL reception. Regardless of satellite signal, the display will be done in PAL format. When your TV is only for NTSC reception. Regardless of satellite signal, the display will be done in NTSC format.
Note : If the satellite signal and your TV type are mismatched, the TV picture may be distorted. Even in this case, MENU will be displayed as normal. (e.g. When you receive PAL satellite signal with NTSC TV type setting or vice versa)

Setting Aspect Ratio

This sub-menu allows you to select your TV aspect ratio to 4:3 or 16:9 according to your wishes. Press MENU key. Press Press Press 4x3 16x9 or or or to select System Parameters, and press to select Aspect Ratio. to select 4x3 or 16x9.

Note : These subtitle and audio parameters are workable only when the receiving channel supports these functions.

Teletext

Teletext Service is text data service from Service Provider. It is available only when the satellite signal carries teletext service data. Press BLUE key and wait. If * sign is pop up in the left upside of the screen as the following picture, wait until teletext service menu is displayed because * means 'This program provides teletext service. So wait a moment'. Screen
Teletext Service Data is displayed as following picture. Screen
Select your interesting item with numeric keys. For example, if you want to see about 'CITY GUIDE', press. Screen

Sleep Timer

Your receiver will automatically power-off when the time you set is passed. Press SLEEP key until the right time you want appears. Screen
Note : 1. You can set SLEEP TIMER in 30 minute steps up to 150 minutes. 2. The SLEEP TIMER does not work while you are in MENU, GUIDE or CHANNEL LIST.

Aux in

You can set in/out mode of the two scart connectors (TV, AUX) on the rear panel. Press Aux in key until the scart mode you want is displayed. Screen
Input satellite signal will be output to TV Scart and AUX (VCR) Scart. ( can connect VCR to AUX connector for recording ) Input signal from AUX scart connector will be output to TV scart. If there is no input from AUX scart, your receiver will work as if you chose SAT mode. Input signal from AUX scart connector will be output to TV scart by force. Input signal from TV scart connector will be output to AUX scart. (Only for CVBS)

AUX 2 TV

Note : You cannot see picture when set to AUX 2 mode and there is no input signal from outside.

Channel / Information

Brief information is displayed, such as current channel type, name, local start/end time, guide information, current time, fav/normal mode, Audio mode and Audio ID. Press INFO, then the information bar will pop-up. Screen

((( 1/8

13:41 JOURNAL News-Busin. 13:26 ~ 13:56
Note : If you have no information : - Check your local time setting is correct. - Information is not sent by the channel provider.

Start Recording

You can record the current channel by pressing RED( ) key. If Program Guide menu has poped-up, you can record any channel you want. Press RED( ) key to record current channel. ) key to record after selecting a pro-
In Program Guide menu, press RED( gram you want.
Then Record dialog menu will be displayed. Screen
11:CH 22 - Indue CH Sa Name Information start Stop REC S ABo TV Notwo Default Event 11:19 00:40 00:36
-Record, E -Exit, 0 ~ 9 -Edit

Current nt

Some items can be edited in Record dialog menu. Note : Default recording duration time is setted for 2 hours or the dnration time of scheduled program is setted for its scheduled time. Press Screen

HD-Program Guide

to start recording.

11:Default Event

Play REC

Play time

Free 38.8 GB (99.4%) Default Event

-Delete, -Satellite Mode

28/08/2001 11:20

/ -Wotoh,

Note : When a program is recorded, only the program stored in HD can be played and red R-icon is displayed. Current recorded program is played automatically a little while later.

Stop Recording

To stop recording mannally, you must enter HD-Program Guide menu and press ORANGE(LIST) key. If any program has been played, press ORANGE(LIST) key to enter HDProgram Guide menu. If HD-Program Guide menu is displayed. Press ORANGE(LIST) key to stop recording. Screen
Title Play Type Do you want to stop recording? REC Yes / No E
Note : If there are any user inputs in HD-Program Guide for 5-minutes without any playing and recording, your receiver will go automattically to power-off.

Start Playing

You must select a program to play stored programs. For entering HD-Program Guide menu, press ORANGE(LIST) key. Press ORANGE(LIST) key. In HD-Program Guide, select a program by pressing Screen
11:Default Event CH 23 - Indus CH 25 - DBN24 RAI Internati CH 22 - Indus 00:03
Play 00:01 00:03 00:01 00:01 00:25
Free 37.3 GB (95.6%) CH 23 - Indus

28/08/2001 11:22

to start playing. or INFO key then
Note : For controlling trick play mode, you must press HD-Information Bar will pop-up.

Trick Play Controls

For using trick play mode, you must press Bar will pop-up. Screen or INFO key then HD-Information
5 CH 22 - Indua 00:05:04 / 2 Ch ((( S

00:24:53

CH 22 - Indus
Trick Play Mode : Pause, Jump, Fast Forward, Fast Reverse, Resume. HD Playing
YELLOW GREEN BLUE IVORY INFO or
HD Paused Jump Forward Jump Backward Resume Stop Info On/Off. or GREEN.
Fast Forward Fast Reverse Pause Stop Info On/Off Press BLUE Press BLUE Press YELLOW Press BLUE

- Pause - Jump

- Fast Foeward - Fast Reverse - Stop
Press YELLOW Press GREEN Press IVORY
You can delete any program in HD-Program Guide menu. Press ORANGE(LIST) key then HD-Program Guide menu will pop-up. In HD-Program Guide, select a program with Press RED( up. Screen
) key to delete the program then Delete dialog menu will pop-
Title Play Type Do you want to delete this ? 00:01

E / No 00:03

00:01 00:01 00:25 Free 37.3 GB (95.6%) CH 23 - Indus

-Delete,

-Satellite Mode
to delete the program or EXIT key to void.
Note : For deleting any stored program, you must stop both playing and recording.
If you want to lock any program, enter the advanced menu by pressing MENU key with HD- Information Bar. After locking a program, you must enter the password for playing the program. Start playing a program. Press then HD-Information Bar will pop-up.
Press MENU key, the advanced menu will pop-up. Screen
Lock Clear skip points Split take 1 SABe TV Netwo 00:00:16 / 2 Ch ((( S

00:01:10

Default Event

Select LOCK using Press

, LOCK enable or disable will be setted with Yes or No.
Note : The password for playing a stored program is the same password for any other lock operation.
You can set the part you dont want to play, such as advertise ments. The skip part consists of start and end points. In all, 10 skip points are available. Select a program with Guide menu. or , and press to play in HD-Program
Start playing and search the start point of skip play you want using trick play controls. Press RED( Screen ) key to set the start point.
5 CH 22 - Indus 00:06:03 / 2 Ch ((( S
Temperary start point will be displayed with a red pointer on the Bar. Press RED( ) key to set the end point you want.
Then a proper pair of start and end points will be displayed with yellow pointers on the Bar. Screen
Note : To try setting on improper pair will be rejected. Press RED( ) key at the position between start and end points, then the skip-point will be removed. Press MENU key and select Clear skip points. Screen

To receive pay-TV channels you need a CA Module and a Smart card from the service provider (program distributor) of your preference. If you are subscribing to services from more than one service provider, you need to change different smart card or even different CA Modules. Since a smart card is connected to a single service provider, a limited range of channels will be available. Without the CA Module and the smart card, you can watch only Free-to-Air programs. PIN-Code The card is loaded with a 4-digit code, a so-called PIN code (Personal Identification Number). Normally the PIN code is 0000 or 1234. The PIN code is necessary for the future extra service offered by the service provider.
With a DVB COMMON INTERFACE compatible CAM (Conditional Access Module) and a Smart card, you can receive relevant scrambled channels and/or encrypted channels. Insert a CAM into one slot of your receiver. (You can insert two CAMs at the same time)
Note : 1. Insert the CAM fully into the slot so that the arrow marked on the CAM faces upwards and inwards. 2. Insert the smart card fully into the CAM so that the micro chip (gold color) faces upwards and inwards. The message of CAM Initializing will appear on the screen. After the message CAM Initializing has disappeared, you can select the channel you want.
You can check the status of CAM and smart card inserted in their slots. Press MENU key. Press. Screen
, and select the Common Interface you want, then press
Brief information on selected CAM will be displayed. Screen

Common Interface

Slot #1 Version Provider Slot #2 Version Provider Not available Not available DVB_CI_V1.00 Viaccess
If you want detailed information on the selected CAM select slot number 1 or slot number 2 with or and press. Proceed with further instructions displayed on the screen, depending on the CAM in use. Note : Further detailed information is not mentioned in this manual since the information depends on CAM and smart cards.
There may be various reasons for the abnormal operation of the unit. Therefore, if the unit does not work properly, check it according to the procedures shown in the table below :

Problem

Possible causes

Remedy

LED on front panel AC power cord disconnected. Connect power cord properly into the power socket. does not light. No Picture or sound.
Wrong connection of the Connect two terminals correctly video/audio output to TV input with scart cable or RCA or RF cable. terminal. Wrong connection of satellite antenna cable. Wrong direction of satellite antenna. No signal or weak signal. Connect the antenna cable correctly. Adjust the direction of antenna. Check the cable connections, LNB and other equipment connected between the LNB and the receiver or adjust the antenna.

Wrong setting of channel infor- Type the setting value correctly. mation in MENU screen.
B l a c k - a n d - w h i t e Your TV mode is different from satellite broadcasting mode. screen or V-Hold.

Use TV of same mode.

Use the NTSC/PAL converter connected to the receiver and TV. Battery exhausted. Change the batteries.
The remote controller is not working.
Fluorescent light interfering Switch off the light. with the remote controller Remote controller is incorrectly aimed. Aim the remote control at the receiver.
System capabilities LNB/Tuner input
Fully DVB compliant Connector Frequency range Signal level LNB supply LNB switch control DiSEqC IEC 169-24, female 950MHz -65dBm 2150MHz 25dBm
14/18V, max 400mA 22KHz Ver 1.2 & Ver 1.0 Compatible QPSK 4Msps 45Msps

Demodulator

Front end Symbol rate SCPC and MCPC Capable Spectral inversion
Auto conversion 32bit processor (50MHz) 4Mbyte 2Mbyte 2Kbyte Main Proflie @ Main Level up to 15M bits/s 720 X 576, 720 X 480 NTSC, PAL 4:3, 16:9

System resource

Processor SDRAM FLASH EEPROM

Video Decoder

MPEG 2 Data Rate Resolution Video format Aspec Ratio

Teletext MPEG Audio

DVB compliant MPEG 1 layer 1 & 2 Type Sampling rates
Mono, Dual mono, Stereo, Joint Stereo
32, 44.1 and 48 KHz 9pin D-sub male, Max 115K bps

Serial data interface

Remote control

Code Operating condition

NEC-IR up to 7 Meter max 40W 100V 47Hz 250V 63Hz

Power supply

Power consumption Supply voltage Supply frequency Video out
1 X RCA cinch 2 X RCA cinch 1 X RCA cinch 9pin D-sub IEC 169 IEC 169 IEC 169 IEC 2

Rear Panel connectors

Audio L/R DIGITAL OUT Serial data Digital tuner input Loop-through Digital tuner Terrestrial ant input RF modulator output
TV SCART (European model only)
RGB, CVBS, Y/C, audio CVBS, Y/C, audio
AUX SCART (European model only) Connector Frequency Output channel number
RF modulator (PAL or NTSC) PAL G/I/K TV Type
IEC 169-2, female/male 860MHz 69

Physical Specification

Size (W X H X Weight (Net)
335 X 58.5 X 268(mm) 3.2Kg
Note : These connectors can be removed by customers requirement.