i.Tech Arrow Lite User Guide i.Tech Arrow Lite
i.Tech Arrow Lite Overview

5 Fig.1

1 Status Indicator (This small light will flash red, blue or purple dependant on pairing mode and operation) 2 Multi-function Button (MFB) 3 Charging Socket 8 Built-in Microphone Built-in Rechargeable Battery Ear Hook Volume Button(+/-) Earpiece

Getting Started

User Guide
To use your i.Tech Arrow Lite Bluetooth Headset (the headset), please follow the steps below: 1. Ensure your headset is fully charged 2. Pair your charged headset with a Bluetooth-enabled mobile phone

Charging Your Headset

Insert the charger plug into the headsets charging socket (refer to Figure 3) and plug the mains charger to an AC wall outlet. The light on the Arrow Lite (status indicator) will stay red during charging. IMPORTANT: Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. Normal Charging Time It takes about three hours to fully charge the battery. When the battery is fully charged, the status indicator will turn blue and remain on. Unplug the mains charger from the AC wall outlet and the charger plug from the headset. Press and hold the MFB (refer to Figure 1) for two seconds to turn on the headset. Please refer to Turning Your Headset On and Off for further details. Talk and Standby Time A fully charged battery can offer up to 12 hours of talk time and up to 180 hours of standby time. When there are no calls the headset should remain turned on in standby mode. Battery Low Indication When the battery has become low when the headset is on, the status indicator will flash red and the headset will emit a beep* every minute. Please follow the instructions described above to recharge the battery. *If you are pairing your headset and your mobile phone in a noisy environment, we advise you to put on the earphone first so that the beep will be more audible.

Charging Socket

Charger

Charger Plug

The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommended to fully charge the battery first. 3
Turning On the Headset Press and hold the MFB (see Figure 1) for two seconds until you hear a short beep. The status indicator will then flash blue. IMPORTANT: Press the MFB again when you want to turn on the headset to re-activate pairing and ensure the connection between the headset and the mobile phone is resumed. For pairing, please refer to Pairing Your Headset on page 8 of this user guide. Turning Off the Headset Press and hold the MFB for two seconds until you hear a long beep. The status indicator will turn red and the headset will turn off. IMPORTANT: To disconnect the Bluetooth connection, press the headsets MFB firmly to turn it off. If you will not be using the headset for a while, we advise you turn off the Bluetooth function on your mobile phone as well. 4
Turning Your Headset On and Off

Pairing Your Headset

IMPORTANT: If the pairing cannot be completed within two minutes after the pairing mode has been activated, the headsets status indicator will flash purple-red accompanied by three beeps and will then turn off automatically. Please repeat steps 2 to 7 above to pair the headset and the mobile phone again.
Using Your i.Tech Arrow Lite Headset

Up to 1 metre

The headset works with Bluetooth-enabled mobile phones only. Prior to using and pairing your headset for the first time, please check if your mobile phone is Bluetooth-enabled. This information will normally feature on the packaging or user guide that is provided with your mobile phone. The pairing instructions for a typical Bluetooth-enabled mobile phone are explained on the next page. The headset pairing procedure may vary depending on the model of your mobile phone. Please contact the manufacturer of your mobile phone or its agent for further information. 1. Place the headset and the mobile phone where they are no more than one metre apart. 2. Ensure the headset is off. (The status indicator is unlit and does not flash.) 3. Press and hold the MFB until the headsets status indicator flashes blue and red alternately. 4. Activate your mobile phones Bluetooth function. Please refer to your mobile phone user guide for details. 5. Set the mobile phone to search for Bluetooth devices within the one metre range, as instructed in the mobile phone user guide, and select i.Tech Arrow Lite from the list. 6. Enter the pre-programmed passkey 0000 and press OK to pair your headset and mobile phone. When the pairing is completed, the headsets status indicator will flash blue rapidly for five times followed by a long beep. 7. Go back to your mobile phones main menu. For certain mobile phone models, once the headset is activated, a headset icon will be shown on the screen. You should now be able to 5 make and receive calls using your headset.

Answering a Call When there is an incoming call, you will hear the ring through the earphone. Press the MFB once to accept the call or answer the call via your mobile phone in the normal way. Ending a Call Press the MFB once to end your call, or end the call via your mobile phone in the normal way. Adjusting the Volume Press the volume UP or DOWN key repeatedly until you reach the desired volume level. The volume may be affected by the volume setting of the callers phone as well. Re-adjust the listening volume again when necessary. Call Muting During Conversation During conversation, press and hold the Volume Key for 2 seconds to mute the built in microphone, when the mute function is activated, you will hear a short beep every 5 seconds accompanied by the headsets status indicator flashing every 5 seconds. To cancel, press the Volume Key for 2 seconds to deactivate the muting function whilst in conversation. Dialing from Your Mobile Phone Simply make calls on your mobile phone in the normal way. Voice Dialing from Your Headset If your mobile phone is equipped with the voice dialing function, simply press the MFB on your headset, and when you hear a beep say the voice tag. IMPORTANT: For voice dialing, you must record the voice tag (the persons name) into your mobile phone before using the voice dialing function on the Arrow Lite headset. Please refer to your mobile phones user guide on how to record the voice tag.
Last Number Redialing from Your Headset Press the MFB on your headset twice. IMPORTANT: The above functions are only applicable to mobile phones with Bluetooth Handsfree Profile. Functionality varies depending on the mobile phone model you have. Please refer to your mobile phone user guide for additional information. Rejecting a Call (Handsfree Profile ONLY) Press and hold the Volume Key then press the MFB key to reject the incoming call Transferring a Call (Handsfree Profile ONLY) Press and hold the Volume Key then press the MFB key to transfer the call from headset to your mobile handset.
Resetting or Removing Pairing
You may reset the headset to its original settings anytime. To do this you also clear all current pairing settings. 1. Insert the charger plug into the headsets charging socket 2. Press and hold either of the volume keys for 20 seconds until the status indicator flashes purple rapidly. 3. Release the volume key. 4. Press and hold the volume key again until the status indicator is purple. 5. The headset is reset and will resume the charging mode. Note: After resetting, all previous pairing settings are cleared.

Care and Maintenance

Do not bring your headset into contact with any sharp objects as this will cause scratches and damage. Do not stick anything inside the headset as this may damage internal components. Do not attempt to disassemble the headset as it does not contain serviceable components. Do not pull or drag the earphone-wire with force. If you will not use the headset for a long period, please store it in a dry place that is free from extreme temperatures and dust. Built-in Battery Do not attempt to replace the headsets battery as it is in-built and is not changeable. Charge the battery in accordance with the instructions supplied with this user guide. Use only the charger supplied by the headsets original manufacturer to charge the battery. Charger Use only the charger supplied by the headsets original manufacturer to charge the headset. Other chargers may look the same, but they could be dangerous. Do not attempt to disassemble the charger as it may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the headset is subsequently used. Do not use the charger outdoors or in damp areas. Only charge the headsets built-in battery in accordance with the instructions described in this user guide. Avoid charging the headset in extremely high or low temperatures.
Headset Turn off your headset before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile phone may place an unintended call. Do not expose the headset to liquid, moisture or humidity as it is not waterproof. Do not use abrasive cleaners to clean the headset. Do not expose the headset to extremely high or low temperatures. Do not leave your headset under the hot sun for a long time. Do not leave your headset near open flames such as cooking burners. Do not dispose of the headset in a fire as it will result in explosion.

Safety Information

Check and observe local laws regarding the use of a mobile phone and headset while driving. If you use the headset while driving, ensure your full attention and focus. It is your responsibility to drive safely. Consider to pull off the road before making or answering a call. Never leave your headset above any air bag deployment area inside your car as serious injury may result when an air bag deploys. Never allow children to play with the headset small parts may be of choking hazard. Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres.

Troubleshooting

Turn off your headset prior to boarding an aircraft. Do not use your headset inside an aircraft. To prevent damage to your hearing, please do not set the listening volume too high. Never use the headset while taking a bath. Do not use the headset in a sauna or steam room. Do not keep your headset near a wash basin or other wet places. Do not use the headset outdoors in the rain. Do not clean the headset while it is being charged. Always unplug the charger first before cleaning the headset. Do not attempt to modify the headset for other purpose. Do not attempt to force open or mutilate the built-in battery. Replace the earphone when it shows signs of breaking from the wire. Disposal of the packaging and the headset should be done in accordance with the local regulations.
Bluetooth Specification: Version 2.0 Class 2 Bluetooth Profile Supported: Headset and Handsfree Range of Frequency: 2.4GHz Spectrum 10 metres Reception distance: Normal Charging Time: Within 3 hours Talk Time*: Up to 12 hours Standby Time*: Up to 180 hours Dimensions: 56 (L) x 20 (W) x 26 (H) mm Weight: 12.5 grams *may vary due to users operation mode and mobile phone settings

Product Specifications

Declaration of Conformity
If you are unable to connect your headset and mobile phone, please try the following: Ensure your the battery is fully charged. Turn off your headset, and then turn it on again. Ensure the headset is paired with your mobile phone. Ensure your mobile phones Bluetooth function is activated. (For some phone models, a headset icon will appear on the phones screen.) Please refer to your mobile phone user guide for specific instructions. Ensure the headset is within 10 metres of your mobile phone and there are no obstructions, such as walls or other electronic devices, in between. If the above suggestions do not solve your problem, please recharge the headset and remove your mobile phone battery for a while. Then start pairing again. The i.Tech Arrow Lite Bluetooth Headset is compliant with and adopts the Bluetooth Specification Version 2.0 Class 2. However, interoperability between the headset and other Bluetooth-enabled products is not guaranteed because it depends on compatibility. For more information on the compatibility between the headset with other Bluetooth-enabled products, please check with the respective manufacturer or visit http://www.itechdynamic.com

We, i.Tech Dynamic Ltd., declare that the following product: Product Name: i.Tech Arrow Lite Model No.: C51-A06001-XX Is in conformity with the following essential requirements of Council Directive 1999/5/EC ( referred to as R&TTE Directive ) : Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of above directive. A copy of the Declaration of Conformity can be found at: http://www.itechdynamic.com 10/2006 Printed in China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. i.Tech declares under our sole responsibility that the headset is in conformity with the provisions of the following Council Directives: 1999/5/EC. Dispose of the packaging and this product in accordance with the latest provisions.

i.Tech Arrow X

S3J-A06065-C1-F
Contents i.Tech Arrow X Overview...... 33 Getting Started...... 33 Wearing Your i.Tech Arrow X...... 34 Charging Your Headset..... 34-35 Normal Charging Time...... 35 Talk and Standby Time..... 35 Battery Low Indication..... 35 Turning Your Headset On and Off..... 36 Turning On the Headset...... 36 Turning Off the Headset...... 36 Pairing Your Headset...... 36-37 Using Your i.Tech Arrow X Headset..... 38-39 Answering a Call..... 38 Ending a Call...... 38 Adjusting the Volume..... 38 Call Muting During Conversation..... 38

E N G L I SH

Dialing from Your Mobile Phone..... 38 Voice Dialing from Your Headset..... 39 Last Number Redialing from Your Headset.... 39 Rejecting a Call (Handsfree Profile ONLY)..... 39 Transferring a Call (Handsfree Profile ONLY)..... 39 Resetting or Removing Pairing...... 40 Care and Maintenance...... 40-41 Headset....... 40 Built-in Battery...... 41 Charger...... 41 Safety Information...... 42 Troubleshooting...... 43 Declaration of Conformity..... 44 Product Specifications...... 45

E N GLIS H

Charger Plug
Charging Socket Charger Fig.1 Fig.3
Multi-function button (MFB) Volume button + Volume button Speaker (In-ear type)
Built-in Microphone Built-in Rechargeable Battery Status Indicator Charging Socket
The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommended to fully charge the battery first. Insert the charger plug into the headsets charging socket (refer to Figure 3) and plug the mains charger to an AC wall outlet. The light on the Arrow X (status indicator) will stay red during charging. IMPORTANT: Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained.

Getting Started

To use your i.Tech Arrow X Bluetooth Headset (the headset), please follow the steps below: 1. Ensure your headset is fully charged 2. Pair your charged headset with a Bluetooth-enabled mobile phone
Fig. 2 Wearing your Headset
Normal Charging Time It takes about three hours to fully charge the battery. When the battery is fully charged, the status indicator will turn blue and remain on. Unplug the mains charger from the AC wall outlet and the charger plug from the headset. Press and hold the MFB (refer to Figure 1) for two seconds to turn on the headset. Please refer to Turning Your Headset On and Off on the next page for further details. Talk and Standby Time A fully charged battery can offer up to 4 hours of talk time and up to 100 hours of standby time. When there are no calls the headset should remain turned on in standby mode. Battery Low Indication When the battery has become low when the headset is on, the status indicator will flash red and the headset will emit a beep* every minute. Please follow the instructions described above to recharge the battery. * If you are pairing your headset and your mobile phone in a noisy environment, we advise you to put on the earphone first so that the beep will be more audible.
Turning On the Headset Press and hold the MFB (see Figure 1) for two seconds until you hear a short beep. The status indicator will then flash blue. IMPORTANT: Press the MFB again when you want to turn on the headset to re-activate pairing and ensure the connection between the headset and the mobile phone is resumed. For pairing, please refer to Pairing Your Headset of this user guide. Turning Off the Headset Press and hold the MFB for two seconds until you hear a long beep. The status indicator will turn red and the headset will turn off. IMPORTANT: To disconnect the Bluetooth connection, press the headsets MFB firmly to turn it off. If you will not be using the headset for a while, we advise you turn off the Bluetooth function on your mobile phone as well.

Pairing Your Headset

The headset works with Bluetooth-enabled mobile phones only. Prior to using and pairing your headset for the first time, please check if your mobile phone is Bluetoothenabled. This information will normally feature on the packaging or user guide that is provided with your mobile phone.

Up to 1 meter

(Fig. 4)

Charging Your Headset

Turning Your Headset On and Off

i.Tech Arrow X Overview

i.Tech Arrow X Lanyard
Wearing Your i.Tech Arrow X

E N GLISH

The pairing instructions for a typical Bluetooth-enabled mobile phone are explained on the next page. The headset pairing procedure may vary depending on the model of your mobile phone. Please contact the manufacturer of your mobile phone or its agent for further information. 1. Place the headset and the mobile phone where they are no more than one metre apart. 2. Ensure the headset is off. (The status indicator is unlit and does not flash.) 3. Press and hold the MFB until the headsets status indicator flashes blue and red alternately. 4. Activate your mobile phones Bluetooth function. Please refer to your mobile phone user guide for details. 5. Set the mobile phone to search for Bluetooth devices within the one metre range, as instructed in the mobile phone user guide, and select i.Tech Arrow X from the list. 6. Enter the pre-programmed passkey 0000 and press OK to pair your headset and mobile phone. When the pairing is completed, the headsets status indicator will flash blue rapidly for five times followed by a long beep. 7. Go back to your mobile phones main menu. For certain mobile phone models, once the headset is activated, a headset icon will be shown on the screen. You should now be able to make and receive calls using your headset. IMPORTANT: If the pairing cannot be completed within two minutes after the pairing mode has been activated, the headsets status indicator will flash purple-red accompanied by three beeps and will then turn off automatically. Please repeat steps 2 to 7 above to pair the headset and the mobile phone again.
Answering a Call When there is an incoming call, you will hear the ring through the earphone. Press the MFB once to accept the call or answer the call via your mobile phone in the normal way. Ending a Call Press the MFB once to end your call, or end the call via your mobile phone in the normal way. Adjusting the Volume Press the volume UP or DOWN key repeatedly until you reach the desired volume level. The volume may be affected by the volume setting of the callers phone as well. Re-adjust the listening volume again when necessary. Call Muting During Conversation During conversation, press and hold the Volume Key for 2 seconds to mute the built in microphone, when the mute function is activated, you will hear a short beep every 5 seconds accompanied by the headsets status indicator flashing every 5 seconds. To cancel, press the Volume Key for 2 seconds to deactivate the muting function whilst in conversation. Dialing from Your Mobile Phone Simply make calls on your mobile phone in the normal way.

EN G L I S H

Voice Dialing from Your Headset If your mobile phone is equipped with the voice dialing function, simply press any of the Volume buttons on your headset, and when you hear a beep say the voice tag. IMPORTANT: For voice dialing, you must record the voice tag (the persons name) into your mobile phone before using the voice dialing function on the Arrow X headset. Please refer to your mobile phones user guide on how to record the voice tag.
Last Number Redialing from Your Headset Press any of the Volume buttons on your headset twice. IMPORTANT: The above functions are only applicable to mobile phones with Bluetooth Handsfree Profile. Functionality varies depending on the mobile phone model you have. Please refer to your mobile phone user guide for additional information. Rejecting a Call (Handsfree Profile ONLY) Press and hold the Volume Key then press the MFB key to reject the incoming call Transferring a Call (Handsfree Profile ONLY) Press and hold the Volume Key then press the MFB key to transfer the call from headset to your mobile handset.
Resetting or Removing Pairing
You may reset the headset to its original settings anytime. To do this you also clear all current pairing settings. 1. Insert the charger plug into the headsets charging socket 2. Press and hold either of the volume keys for 20 seconds until the status indicator flashes purple rapidly. 3. Release the volume key. 4. Press and hold the volume key again until the status indicator is purple. 5. The headset is reset and will resume the charging mode. Note: After resetting, all previous pairing settings are cleared.

Care and Maintenance

Headset Turn off your headset before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile phone may place an unintended call. Do not expose the headset to liquid, moisture or humidity as it is not waterproof. Do not use abrasive cleaners to clean the headset. Do not expose the headset to extremely high or low temperatures. Do not leave your headset under the hot sun for a long time. Do not leave your headset near open flames such as cooking burners.
Using Your i.Tech Arrow X Headset
Do not dispose of the headset in a fire as it will result in explosion. Do not bring your headset into contact with any sharp objects as this will cause scratches and damage. Do not stick anything inside the headset as this may damage internal components. Do not attempt to disassemble the headset as it does not contain serviceable components. Do not pull or drag the earphone-wire with force. If you will not use the headset for a long period, please store it in a dry place that is free from extreme temperatures and dust. Built-in Battery Do not attempt to replace the headsets battery as it is in-built and is not changeable. Dispose of batteries according to local regulations. Do not dispose as household waste. Charge the battery in accordance with the instructions supplied with this user guide. Use only the charger supplied by the headsets original manufacturer to charge the battery. Charger Use only the charger supplied by the headsets original manufacturer to charge the headset. Other chargers may look the same, but they could be dangerous. Do not attempt to disassemble the charger as it may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the headset is subsequently used. Do not use the charger outdoors or in damp areas. Only charge the headsets built-in battery in accordance with the instructions described in this user guide. Avoid charging the headset in extremely high or low temperatures.

Check and observe local laws regarding the use of a mobile phone and headset while driving. If you use the headset while driving, ensure your full attention and focus. It is your responsibility to drive safely. Consider to pull off the road before making or answering a call. Never leave your headset above any air bag deployment area inside your car as serious injury may result when an air bag deploys. Never allow children to play with the headset small parts may be of choking hazard. Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres. Turn off your headset prior to boarding an aircraft. Do not use your headset inside an aircraft. To prevent damage to your hearing, please do not set the listening volume too high. Never use the headset while taking a bath. Do not use the headset in a sauna or steam room. Do not keep your headset near a wash basin or other wet places. Do not use the headset outdoors in the rain. Do not clean the headset while it is being charged. Always unplug the charger first before cleaning the headset. Do not attempt to modify the headset for other purpose. Do not attempt to force open or mutilate the built-in battery. Replace the earphone when it shows signs of breaking from the wire. Disposal of the packaging and the headset should be done in accordance with the local regulations.

ENGLISH

If you are unable to connect your headset and mobile phone, please try the following:
Ensure your the battery is fully charged. Turn off your headset, and then turn it on again. Ensure the headset is paired with your mobile phone. Ensure your mobile phones Bluetooth function is activated. (For some phone models, a headset icon will appear on the phones screen.) Please refer to your mobile phone user guide for specific instructions. Ensure the headset is within 10 metres of your mobile phone and there are no obstructions, such as walls or other electronic
devices, in between. If the above suggestions do not solve your problem, please recharge the headset and remove your mobile phone battery for a while. Then start pairing again. The i.Tech Arrow X Bluetooth Headset is compliant with and adopts the Bluetooth Specification Version 2.0 Class 2. However, interoperability between the headset and other Bluetooth-enabled products is not guaranteed because it depends on compatibility. For more information on the compatibility between the headset with other Bluetooth-enabled products, please check with the respective manufacturer or visit http://www.itechdynamic.com

We, i.Tech Dynamic Ltd., declare that the following product: Product Name: i.Tech Arrow X Model No.: C51-A06065-XX Is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive. A copy of the Declaration of Conformity can be found at: http://www.itechdynamic.com

Troubleshooting

Declaration of Conformity

Safety Information

E N G LI S H
Bluetooth Specification: Bluetooth Profile Supported: Range of Frequency: Nominal Charging Time: Talk Time*: Standby Time*: Dimensions: Weight:
Version 2.0 Class 2 Headset and Handsfree Profiles 2.4GHz spectrum Within 3 hours Up to 4 hours Up to 100 hours 43 mm (L) x 19mm (W) x 25.7mm (H) 9.4 grams
* May vary due to the users habit, different modes of operation, and mobile phone settings. * The manufacturer has the right to modify infos, product spec. and product IDs whithout any advice

Product Specifications