Icom BC-119, size: 170 KB
Adapter cup required
Brand: ICOM AMERICA
Part Numbers: 51247, BC-119N 02, BC119N02
Here you can find all about Icom BC-119, for example manual and review. You can also write a review.
[ Report abuse or wrong photo | Share your Icom BC-119 photo ]
User reviews and opinions
|Alex Thurgood||1:44am on Friday, October 1st, 2010|
|Direct The laptop is used for everyday use. the start up is quite slow, the SD card slot is for a specific size.....but everything else seems ok. GREAT LAPTOP A FIRST CLASS PRODUCT, BOUGHT FOR ONE OF MY SONS, HAS HELPED HIM GREATLY WITH HIS STUDIES.|
|antani||1:02pm on Sunday, September 12th, 2010|
|Toshiba has a strong reputation for being able to put together budget laptops that have the look and feel of more expensive machines.|
|ag||1:03pm on Wednesday, August 25th, 2010|
|i was looking for a new laptop to replace my Toshiba M2. the M2 i purchased 2nd hand ..|
|ads73||6:08pm on Wednesday, July 28th, 2010|
|Slow boot up? If anyone has any problems with slow boot up and its running vista.|
|mnasato||11:34pm on Tuesday, June 15th, 2010|
|a good laptop this laptop has lasted me two years and with me and that is a long time considdering that i am at a school where some play a game called...|
|Moon Walker||1:15am on Friday, May 7th, 2010|
|large screen and very quick light ,easy to use,quick installation opening catch suitable and easily handled for a silver surfer none so far|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
INSTRUCTIONS DESKTOP CHARGER
Thank you for purchasing the BC-119N DESKTOP CHARGER. The BC-119N charges a Ni-Cd or Ni-MH battery pack in approx. 12 hrs., or a Li-Ion battery pack in approx. 23 hrs. Please read these instructions thoroughly before operating the BC-119N.
ATTACHING A DESKTOP CHARGER ADAPTER
There are 2 desktop charger adapter types for the BC-119N. One has a PCB, the other does not. The non-PCB types require an additional PCB (AD-75 or AD-88). For some versions, the AD-75 or AD-88 is already installed in the BC-119N. D For the PCB types: Connect the plugs of an appropriate desktop charger adapter and the BC-119N, then installed the adapter with the screws (supplied with the adapter). For some versions, the desktop charger adapter is already installed. Installing the PCB type adapter D For types requiring the AD-75/AD-88: Install the optional AD-75 or AD-88 to the BC-119N with 4 screws (supplied with the AD75/AD-88), then attach a desktop charger adapter to the BC-119N. See the transceivers instruction manual for an approved desktop charger adapter. Installing the AD-75/AD-88
R WARNING! To reduce the risk of injury, charge only specified Icom Ni-Cd, Ni-MH or Li-Ion rechargeable battery packs. Other types of battery packs/cases may burst, causing damage and personal injury. R USE INDOORS ONLY! NEVER expose the charger to rain, snow or any liquids. NEVER let metal, wire, etc. touch any internal part of the charger. NEVER incinerate used batteries. This may cause an explosion. NEVER use the charger when it is covered by objects which impede heat dispersal. Place the charger in a secure place to avoid inadvertent use by children. AVOID charging in conditions of extreme cold (under 10C; +50F) or extreme heat (over +40C; +104F). Batteries may not charge under extreme temperatures. Keep the charger away from TV sets or radios to prevent interference. R NEVER attempt to charge alkaline or dry cell batteries. They may burst causing damage and personal injury. Information (U.S.A. only)
The Ni-Cd battery that you have purchased is recyclable. At the end of its life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Call 1-800-822-8837 for battery recycling options in your area or contact your dealer.
Make sure battery and charger contacts are always clean, otherwise batteries may not fully charge. SAVE THESE INSTRUCTIONS! These instructions contain important safety and operating details for the BC-119N. An appropriate desktop charger adapter must be purchased separately to charge your Icom battery packs. In order to get the maximum life out of your Ni-Cd batteries: 1. Avoid overcharging batteries must be removed from the charger to stop charging. Batteries should not be charged for more than 15 hours after the LED indicator turns green. 2. Use the batteries until they become almost completely exhausted under normal conditions. If your batteries seem to have no capacity even after being fully charged, completely discharge them, then fully charge them again. If they still do not retain a charge (or very little), new batteries must be purchased.
Some versions of the BC-119N which display the CE symbol on the serial number comply with the essential requirements of the 89/336/EEC directive for Electromagnetic Compatibility. This compliance is based upon the harmonised CENELEC generic standard EN50 081-1: 1992 and EN50 082-1: 1991.
Not used See NOTE below
Installing the non-PCB type adapter
See NOTE below
NOTE: Some of the PCB type desktop charger adapters (incl. AD-75/88) do not need connection of the 3-pin connector. The connection is required only for the installing adapter that is compatible with charging a Li-Ion battery pack. R CAUTION Fix the connector with adhesive tape, etc. About the 3-pin connector: When you replace the desktop charger adapter from the Li-Ion compatible type to non-compatible type, fix the 3-pin connector to the bottom of the charger with adhesive tape, etc., to prevent catching or touching the 3-pin connectors terminals with the adapters leads, etc.
Icom, Icom Inc. and are registered trademarks of Icom Incorporated (Japan) in the United States, United Kingdom, Germany, France, Spain, Russia and/or other countries.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan
Printed in Japan 2001 Icom Inc.
Charging example AD-102 for IC-M1V/M1EURO V CAUTION The transceiver power MUST be turned OFF during charging otherwise;
The battery will not be charged correctly. The battery life may be shortened. The transceiver cannot be used even when the power is ON. OPC-515L or CP-17L
DESKTOP CHARGER ADAPTERS
D PCB type adapters
Transceiver IC-F10/F20, IC-M10A/E, IC-2GX series, IC-V68/U68 Charger Adapter Battery pack BP-157/A, BP-160/R, BP-174 CM-140/141/142* CM-138/139/165 BP-185/186
D Non-PCB type adapters (AD-75 or AD-88 is required)
Transceiver IC-W21/X21, IC-2GX series IC-A3/A22 IC-Z1A/E, IC-W31/W32 IC-T22/T42, IC-T7A/E/H IC-T8, IC-T81, IC-A5/A23 Charger Adapter Battery pack
AD-28 BP-131/132/157/A +AD-75 BP-160/174 AD-50 CM-166 +AD-75 AD-51 BP-171/172/173, +AD-75 BP-180 AD-56 BP-171/172/173, +AD-75 BP-180 AD-87 BP-198*/199*/200*/L* +AD-88*
Use the spacer, if supplied with the charger adapter, for charging the battery pack with/without transceiver.
IC-F30/F40, IC-F35/F45 IC-M15, IC-GM1500 IC-M1, IC-M1EURO IC-F3/F4/S, IC-T2H/A/E, IC-F4SR/TR IC-A4, IC-40S
AD-67* AD-68 AD-69
AC adapter (Not supplied with some versions.)
IC-4008A/E/M, IC-4008MKII, IC-446S, IC-40Jr
*AD-67, AD-88, AD-94 and AD-101 have a temperature detection circuit for the Ni-MH battery. When the batterys temperature is outside the charging range, charging stops and the charging indicator flashes until the temperature returns to within the range. AD-101 and AD-102 are compatible for charging the LiIon battery packs, BP-211 and BP-215, respectively.
Lights orange while charging. Lights green when rapid charging is completed. - But it is still charging in trickle charge mode when charging Ni-Cd or Ni-MH battery pack. Flashes red when the protection circuit is activated. - Check the power source (voltage) or re-connect the power plug. - The battery temperature is outside of the charging range. (Ni-MH battery only)
IC-F30G/F40G, IC-F3G/F4G, AD-94* IC-F11/F21/F12/F22, IC-V8, IC-T3H
IC-F30G/F40G, IC-F3G/F4G, BP-209/210*/211, AD-101* IC-F11/F21/F12/F22, BP-222 IC-V8, IC-T3H IC-M1V, IC-M1EURO V AD-102 BP-215
The BC-119N may be able to be used with future transceivers not listed above. See the transceiver instruction manual for the appropriate adapter information.
NOTE for Ni-Cd/Ni-MH battery packs: The BC-119N rapidly charges a battery pack to a specified level, not a completed level, to prevent over-charging. Leave the battery pack in the charger for a few more hours (up to 15 hours; depending on battery condition) after the LED indicator turns green, to charge the battery completely.
Recommendation for Li-Ion battery packs: Li-Ion batteries are different from Ni-Cd batteries in that it is not necessary to completely charge and discharge them to prolong the battery life. Therefore, charging the battery in intervals, and not for extended periods is recommended.
(proj. not incl.)
: 115(W)103(D)60(H) mm 412(W)4116(D)214(H) in. : 200 g; 7.1 oz
Charging temperature range: 10C to 40C; +50F to +104F Power supply requirement: 12 to 20 V DC or the specified Icom AC adapter (BC-145)
: 420 mA10% (rapid charging) 540 mA10% (rapid charging) 670 mA10% (rapid charging) 840 mA10% (rapid charging) 30 mA10 mA (trickle charging) 8 kV 4 kV
Electrostatic durability : Air discharge Contact discharge
All stated specifications are subject to change without notice or obligation.
READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL. This manual contains important safety and operating instructions for the IC-F4TR.
SPECIFICATIONS AND OPTIONS
TABLE OF CONTENTS
GENERAL Frequency coverage (MHz) Mode Usable temperature range Dimensions (proj not incl.) Weight (with BP-196) TRANSMITTER Output power : 400430, 450490, 480512 : 16K0F3E (25 kHz) 11K0F3E (12.5 kHz) : 30C to +60C; 22F to +140F : 57(W)140(H)37 (D) mm ; 214(W)512(H)11532(D) in : 390 g; 13.8 oz :4W
NEVER allow the antenna to come close to, or touch, exposed body parts, especially the face or eyes while transmitting. NEVER disassemble the transceiver. incorrect reassemble may result in a fire hazard or electric shock. NEVER operate the transceiver near unshielded electrical
blasting caps or in an explosive area.
IMPORTANT EXPLICIT DEFINITIONS TABLE OF CONTENTS SUPPLIED ACCESSORIES 1 PANEL DESCRIPTION 2 GETTING STARTED 2-1 Accessory attachment. 2-1 2-2 Turning POWER ON.2-BATTERY PACKS AND BATTERY CASE 3-1 Caution.3-1 3-2 Battery case.3-2 3-3 Battery charging.3-SPECIFICATIONS AND OPTIONS 4-1 Specifications.4-1 4-2 Options.4-2
Audio output power
RECEIVER Sensitivity (12 dB SINAD) : 0.3 V Intermodulation rejection ratio : 75 dB typ. Spurious response rejection : 70 dB typ. Adjacent channel selectivity : 70 dB typ. (25 kHz) 65 dB typ. (12.5 kHz) : 500 mW (at 5% distortion with an 8
AVOID the use of chemical agents such as benzene or alcohol when cleaninguse a water-dampened cloth only.
q w e r Battery pack (comes attached to the transceiver) Flexible antenna Belt clip 1922 A-REAR SHEET
All stated specifications are subject to change without notice or obligation.
For U.S.A. only
CAUTION: changes or modifications to this transceiver, not expressly approved by icom inc., could void your authority to operate this transceiver under fcc regulations.
HM-46/HM-54/HM-75A SPEAKER-MICROPHONES Combination speaker-microphone that provides convenient operation while hanging the transceiver from your belt clip. BC-119 DESKTOP CHARGER + AD-81 CHARGER ADAPTER Used for rapid charging of battery packs. Charging time: 1.5 to 2 hours. An AC adapter is supplied with the chargers (depending on version). BC-121 MULTI-CHARGER + AD-81 CHARGER ADAPTER + BC-124 AC ADAPTER Rapidly charges of up to 6 battery packs (six AD-81s are required) at once. Charging time: 1.5 to 2 hours. BC-133 DESKTOP CHARGER Regularly charges battery pack with/without transceiver. The AC adapter, BC-122, is additionally required. Charging time: approx. 15 hours BC-110A/D/V WALL CHARGER Used for charging via a domestic AC wall socket. CP-12L CIGARETTE LIGHTER CABLE Used for charging via a vehicles cigarette lighter socket (12 V). OPC-254L DC POWER CABLE Used for charging with an external power supply. BP-194 BATTERY CASE Takes eight (8) AA (R6) size batteries. External DC-jack on the transceiver can be used to charge the Ni-Cd battery cells. SP-13 EARPHONE Provides clear audio in noisy environments.
A-5632D-1US Printed in Japan 1999 Icom Inc.
Count on us!
6-9-16 Kamihigashi, Hirano-ku, Osaka 547-0002 Japan
UHF TRUNKED RADIO
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
IC-F4TR without keypad
BATTERY PACKS AND BATTERY CASE
D With the BC-119 or BC-121
The optional BC-119 and BC-121 provide rapid charging of optional Ni-Cd battery pack/s. The following are additionally required: Only one AD-81 for the BC-119; six AD-81s for the BC-121. An AC adapter (may be supplied with the BC-119 depending on version; The optional AC adapter, BC-124, for the BC-121).
Turn power OFF. Turn power OFF.
IC-F4TR with keypad
2-1 Accessory attachment
D BATTERY PACK Before attaching, or replacing the battery pack, the volume control MUST be rotated fully counterclockwise, until a click is heard, to turn the power OFF. TO ATTACH the battery pack to the transceiver, mate the notched ends of the battery pack and the transceiver, and push the battery pack until it clicks into place. TO REMOVE the battery pack from the transceiver, push and hold the battery release downwards, then lift up the battery pack.
NEVER incinerate used battery packs or battery cells. Internal battery gas may cause an explosion. NEVER immerse the battery pack or the battery case in water. If the battery pack or case becomes wet, be sure to wipe it dry BEFORE attaching it to the transceiver. NEVER short terminals of the battery pack or battery case. Also, current may flow into nearby metal objects so be careful when placing battery packs in handbags, etc. If your battery pack seems to have no capacity even after being charged, completely discharge it by leaving the power ON overnight. Then, fully charge the battery pack again. If the battery pack still does not retain a charge (or very little), a new battery pack must be purchased.
t y u i
D Recycling information (U.S.A. only)
The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Call 1-800-822-8837 for battery recycling options in your area or contact your dealer.
BC-121 + AD-81 (6 pcs.) AC adapter, BC-124 (purchased separately)
BC-119 + AD-81
D BELT CLIP Attach the belt clip to the transceiver as illustrated below.
Attach the belt-clip Release the belt-clip
q ANTENNA CONNECTOR Connects the supplied antenna. w VOLUME CONTROL [VOL] Turns power ON and adjusts the audio level. e [SP]/[MIC] JACK Connect optional speaker-microphone, or headset. r PTT SWITCH [PTT] Transmits during push; receives during release. t ACTIVITY LED Lights red while transmitting. y FUNCTION DISPLAY Displays the preset user information. u CHANNEL UP/DOWN KEYS [Y]/[Z] Push either switch to change the operating channel. i DEALER PROGRAMMABLE KEYS [P0]/[P1]/[P2]/[P3]/[A]*/[B]*/[C]*/[D]*/*/ Can each be programmed for one of several functions by your Icom dealer or system operator. D Programmable key reference.
 [P0] [P1] [P2] [P3] *10-keypad type only. * [A]* [B]* [C]* [D]*
3-2 Battery case
D ANTENNA The antenna screws onto the transceiver as illustrated as at right. When using the optional BP-194 attached to the transceiver, install 8 AA (R6) size Alkaline or Ni-Cd batteries as illustrated as at right. When installing Ni-Cd batteries: Make sure all cells are the same brand, type and capacity. Never mix old and new batteries. Either of the above may cause a fire hazard or damage the transceiver.
When using the BC-119 in the vehicle: If the charge indicator flashes orange, the vehicle battery voltage is low and charging may not be performed. Check the vehicle battery voltage in this case. If the charge indicator flashes red, there may be a problem with the battery pack (or charger). Re-insert the battery pack or contact your dealer.
D With the BC-133
The optional BC-133 provides regular charging of optional Ni-Cd battery pack with/without transceiver. The following are additionally required: The optional AC adapter, BC-122.
D With the BC-110 or an optional cables
CAUTION: Only Ni-Cd batteries can be charged. NEVER connect a wall charger when dry or Alkaline cells are installed in the BP-194 BATTERY CASE the transceiver and/or battery case may be damaged. CAUTION: Even if the power source has enough capacity, the [CHARGE] jack can be used for charging purposes only. You can not operate the transceiver without an internal power source. Connect the optional BC-110, CP-12L or OPC-254L to the [CHARGE] jack on the transceiver as illustrated below. Be careful of battery overcharging as the connected battery is charged simultaneously. Approx. charging period: 15 hrs. DO NOT turn power ON while connecting the BC-110A/D/V. Current capacity is insufficient. AVOID over charging. The charging period should be less than 48 hours.
BC-110A/D/V (to AC outlet) To [CHARGE] CP-12L (to 1216 V DC power source)
2-2 Turning POWER ON
Rotate the volume control to the 12 oclock position. A power-up alert tone sounds for about 2 sec. and an opening message may appear. (Depend on pre-setting.) Then the LCD shows user information. (depending on pre-setting). NOTE: If the power-up alert tone does not sound or a channel number does not appear on the display, turn the transceiver OFF, check the battery, then turn the transceiver back ON. If the power-up tone still does not sound or a channel number does not appear, charge the battery or replace it.
When installing dry or alkaline cells: Never connect DC power to the transceiver. Such a connection always charges the installed batteries and will damage the transceiver.
D LOW BATTERY INDICATION
- When appears, battery capacity is becoming low and transmitting is impossible. - When flashes, battery capacity is nearly exhausted.
3-3 Battery charging
Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. CAUTION: To avoid damage to the transceiver, turn it OFF while charging. Recommended temperature range for charging: +10C to +40C (+50F to +104F) Use the Icoms charger (BC-119/BC-121 for rapid charging, BC110, and BC-133 for regular charging) only. NEVER use another manufacturers chargers. An optional cable OPC-254L (for 13.8 V power source) or CP12L (for 12 V cigarette lighter socket) can be used in-stead of the AC adapters of the supplied charger.
o KEYPAD Used to enter DTMF codes, the operating channel, etc.
OPC-254L (to 1216 V DC power source)
DMC-TZ65 CFD-E100L KDL-W40a12U WF-7871TTP Easypix W311 LS1013 Citizen 855 14GX8512 59R Instrument VGN-FZ11S SGH-A167 Sensor S07AHP KRF-V7773D 42LY95 LP2 800 Samsung 550S Ndrive G600 Befw11S4-AT SVJ-DL01 Asipre 4520 KH 1550 UT10560 Digital Designjet 8000 KDE-P32hv2 Camera Intrigue 2000 IA5845 H5350 DM2000X HDR-XR520E Universal 120 Portege R600 80032 Triamp CT-29M30N 3VS300BA BAR938HGA Murano-2003 FT-50 Fujifilm J210 SGH-T459 MZ-R501 Laserline 213 DCP-7045N Torch 9800 CXT85 VS8F-1 LCR 4-ID CFD-S01 BAR986HG XS-GTX6930 F-204RDS Autopilot WD-14316RDK JBL MR38 DVD-3230N 95220 Aficio 240W Grandprix 2001 PL510T Kart DS Arriflex 16S Review 3-device Wisl 66 KCA-S220A ICF-5900W HC-720 ME PS50A457p1D KDC-MP2035 UX-F14CL TM 6230 RDR-HX72 I850 Guide 1000 S 4HP-1998 Alertegps G420 97-10 270940 HPI500 Sbchc8440-05 Nokia E60 FL828 Drive TX-L32c10E KX-TCD200FX Grandam 2002 Marine 20PFL5122 RCD-971 MGE23 Musso LSK243C-1 Pentax K-7 RS-M45 CA-MXS5RMD Rebel GII SU-VX820
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101