Reviews & Opinions
Independent and trusted. Read before buy Icom DS-100-02!

Icom DS-100-02

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Icom DS-100-02, size: 687 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Icom DS-100-02About Icom DS-100-02
Here you can find all about Icom DS-100-02 like manual and other informations. For example: review.

Icom DS-100-02 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Icom DS-100-02 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Icom DS-100-02 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 13. Page 1 of 1. Average Rating:
seraphimh 7:57pm on Wednesday, October 27th, 2010 
Its and amaz phone...buy it widout thinking. Fast, Good touch Screen, looks, syle Battery time is very low....lasts a day At first, I was disappointed in the phone. After using the Htc Hero, I expected the Desire to have a great speakerphone. I was wrong.
OoNoord 4:24pm on Wednesday, October 13th, 2010 
HTC Desire After having to wait for 4 weeks in Sweden I decided to purchase from Amazon (my 1st time) and was happily surprised.
SonicSD 1:09pm on Wednesday, October 6th, 2010 
Excellent phone Love this phone. I think it is far better than the iPhone personally. Just does so many things, so well. GREAT! I recieved the item a couple of days before I expected it so YAY! and the phone was in excellent condition. It had everything it needed e.
smckern 6:32pm on Sunday, September 12th, 2010 
This is not a OLED version this is a SLCD version! very good no - so far The only way I have resolved this, and it has happened at least three times, is to pull of the back cover and pop the battery. And, for the record.
Joe Soap 2:52pm on Friday, September 10th, 2010 
I am about to trade in my problematic Nokia N8 only one month old. So now got to choose which: Galaxy 9000 or this HTC? Great Phone with a miner cons, can be fix in the future. touch sensitivity.
fritzoune 12:30pm on Tuesday, September 7th, 2010 
the phone is very user friendly,faster processor after upgrading to froyo2.2 software. it is a good mobile but,,, where is the secondary camera for a smartphone???? browser, touch sensor SECONDARY camera
b-gay 9:47pm on Wednesday, August 25th, 2010 
Bad quality of the device and service in the selling office. External design is fine Not reliable mechanical/Electrinic of the device. Does it all quickly Battery life is not so good, and the carrier could be better
nst38 3:26am on Saturday, August 14th, 2010 
Great Handset, but... Not wanting to be a sheep and get another iPhone to replace my 3 year old 2G iphone, I decided to buy a Desire.
PaddyL 4:35am on Wednesday, August 11th, 2010 
About the DesireThe HTC Desire is a smartphone, very similar in look and functionality to Apples iPhone. Released in April 2010.
Randal 5:59am on Monday, June 7th, 2010 
"I have it for 3 weeks now and its the best thing ive ever held in my hands.My friend has iPhone 4,and its a great phone but Desire is much better. "I love my desire! some of the software updates have slowed it down considerably tho, anyone have the same issue? It feels lovely in my hand.
Bev 3:11am on Wednesday, May 19th, 2010 
Love this phone Fast, Responsive, great screen, amazing camera in video or pics No slide out keyboard Understand where this Unlocked unit is coming from. Mine came from the Middle East. It has a Quaran and prayer alarm.
eamarkus67 2:40pm on Thursday, April 29th, 2010 
milsy, then you need to come out to where I live. So far only phone that gets any reception is Nokia 6120! Since I bought my Desire I have been crazy in love with it! What a great phone.Isnt it nice to be able to do things like music playlists without having to plug in to a computer and connect to itunes. Would be best phone on market bar none everything but battery life nothing but battery life
Yellow 11:56am on Friday, April 9th, 2010 
this is a very good phone you name it can do it in a matter of seconds Great looking android phone. Real competition for the i-phone.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

DS-100#02-(2) 01.12.13 10:53 AM Page 33 (1,1)

INSTRUCTION MANUAL

DS-100

DSC CONTROLLER

DS-100#02-(2) 01.12.13 10:53 AM Page ii (1,1)

FOREWORD

Thank you for purchasing this Icom product. The DS-100 (#02) DSC CONTROLLER is designed and built with Icoms superior technology and craftsmanship. With proper care this product should provide you with years of trouble-free operation.
FEATURES Class D DSC terminal
The DS-100 (#02) VHF DSC CONTROLLER is designed as a Class D DSC terminal unit for the IC-M401EURO or IC-M503 VHF MARINE TRANSCEIVERS. DS-100 (#02) is not compatible with DS-100 (#01). The plug of the control cable is a different type.

IMPORTANT

READ ALL INSTRUCTIONS
pletely before using the controller. carefully and com-

Self ID indication

SAVE THIS INSTRUCTION MANUALThis instruction manual contains important operating instructions for the DS-100.
THE MMSI NUMBER SHOULD BE PROGRAMMED BY A DEALER PRIOR TO INSTALLATION. The DS-100 (#02) does not function when there is no ID programmed. Therefore, the ID code should be checked in the Set-up menu.

EXPLICIT DEFINITIONS

DEFINITION Personal injury, fire hazard or electric RWARNING shock may occur. CAUTION NOTE i Equipment damage may occur. If disregarded, inconvenience only. No risk of personal injury, re or electric shock.
Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United states, the United Kingdom, Germany, France, Spain, Russia and/or other countries.
DS-100#02-(2) 01.12.13 10:53 AM Page iii (1,1)

CAUTIONS

RWARNING! NEVER connect the controller to an AC outlet. This may pose a fire hazard or result in an electric shock. RWARNING NEVER transmit a distress call when your vessel does not need immediate help. Distress calls can be used only in times of emergency. NEVER connect the controller to a power source of more than 16 V DC. Such a connection will ruin the controller. NEVER place the controller where normal operation of the
ship may be hindered or where it could cause bodily injury.
AVOID using or placing the controller in direct sunlight or in areas with temperatures below 20C (4F) or above +60C (+140F). KEEP the controller out of the reach of children. KEEP the antenna cable and DC power cable as far away
as possible from electrical pumps, generators and other electronic instruments to prevent instrument malfunctions.
KEEP the controller and microphone at least 1 meter away
from your vessels magnetic navigation compass.
DO NOT use chemical agents such as benzene or alcohol when cleaning, as they can damage the terminal unit surfaces.
CE Versions of the DS-100 which display the CE symbol on the serial number seal, comply with the essential requirements of the European Radio and Telecommunication Terminal Directive 1999/5/EC.
This warning symbol indicates that this equipment operates in non-harmonised frequency bands and/or may be subject to licensing conditions in the country of use. Be sure to check that you have the correct version of this radio, or the correct programming for this radio, to comply with national licensing requirements. ii
DS-100#02-(2) 01.12.13 10:53 AM Page iv (1,1)

TABLE OF CONTENTS

FOREWORD.. i IMPORTANT.. i EXPLICIT DEFINITIONS.. i FEATURES... i WARNING... i CAUTIONS... ii TABLE OF CONTENTS.. iii 1 PANEL DESCRIPTION... 1-2 I Front panel... 1 I Function display.. CALL PROCEDURE.. 38 I Entry an MMSI... 3 I Distress call/Simple operation.. 4 I Distress call/Regular operation.. 5 I Entry Position/Time.. 6 I Distress call to ships.. 7 I Individual call... 7 I Group call... 8 I All ships call... WHEN RECEIVING A DSC CALL. 1017 I When receive a distress call. 10 I Received message.. SET-UP... 1820 I Select Set-up... 18 iii I Address ID... 18 I Offset time... 20 I Brightness... 20 I Contrast.. 20 I MMSI check... CONNECTIONS AND INSTALLATION. 2123 I Connection diagram.. 21 I Rear panel description.. 22 I Supplied accessories.. 22 I Mounting... VHF MARINE CHANNEL LIST.. SPECIFICATIONS AND OPTIONS.. 25 I Specications... 25 I Options... DIMENSIONS.. MB-75 (OPTION)... 27-28 I MB-75 FLUSH MOUNT KIT.. TEMPLATE... DOC... 31

DS-100#02-(2) 01.12.13 10:53 AM Page 1 (1,1)

PANEL DESCRIPTION

I Front panel

DSC CONTROLLER ds-100

r ENTER [ENT] Enters the selected subject and advances the item to indicate the contents. Push this key to determine the data.
t UP/DOWN/LEFT/RIGHT SWITCHES [Y]/[Z]/[]/[] Push [Y]/[Z] to select the menu contents in the selected item. Push [Y]/[Z] to adjust brightness and contrast. Push []/[] to move the cursor position. y KEYPAD Input the corresponding number or letters when required. Other functions are as follows; [A/a]Push this key to toggle between capital letters, small letters or numerals. A; capital letter or a; small letter appears in the upper right of the display, depending on selection. [BS]Backspace key. u FUNCTION DISPLAY During normal operation the display shows position and UTC (or Local) time when a GPS receiver is connected. This is updated each time new GPS data is received. If no GPS receiver is connected, the position and UTC time must be set in advance.

WATER RESISTANT

DISTRESS
q DISTRESS BUTTON Push and hold for 5 sec. to make a distress call. w CLEAR SWITCH [CLR] Push this key to cancel Call repeat. Push this key to cancel the menu. e CALL SWITCH [CALL] Push this key to call up a subject menu screen. Push the key to return to the start screen.
DS-100#02-(2) 01.12.13 10:53 AM Page 2 (1,1)
w TIME ZONE INDICATOR Local appears when the offset time data in the Set-up menu is entered. No time data appears when no GPS receiver is connected and no time data is input manually. e POSITION INDICATOR Shows the GPS position data. ?? may blink every 2 sec. instead of position data, when the GPS position data is invalid. In such a case, the last position data is held for up to 23.5 hours. Shows the manually input position data when no GPS receiver is connected. MNL appears instead of GPS at q. ?? may blink every 2 sec. instead of position data, 4 hours after the position data is input manually up until 23.5 hours have past. No position data appears when no GPS receiver is connected and no position data is input manually.
NOTE: If GPS data is interrupted for 30 sec. the GPS indication disappears. The terminal unit retains the most recent data in such cases.

I Function display

-VHF DSC CONTROLLERCH 70 WATCHING
GPS:UTC4:45 Lat4559'N Lon13444'E
q GPS INDICATOR GPS appears while GPS receiver is connected. GPS disappears when no GPS receiver is connected. MNL appears when the time data and position data are input manually. 2
NOTE: When no key operation is made for more than 5 minutes, the function display contents returns to the opening menu message as shown at left, automatically.

DS-100#02-(2) 01.12.13 10:53 AM Page 3 (1,1)

CALL PROCEDURE

I Entring an MMSI
An ID code of your ship must be entered before using the unit for the rst time. Only 3 selectable subjects appear when your ID code has not been entered yet. No distress call can be transmitted in the above condition.

D Entring an MMSI

<Select a subject> Entry position/time Received calls Set up
q Push [CALL], then push [] to select Set up. w Push [ENT], then push [Z] several times to select MMSI entry, then push [ENT] again. e Enter the 9 (nine) digit ID code. r Push [POWER] on the connected transceiver to turn the power OFF. t Push [POWER] to turn the power ON again. All operating items/functions can be selected and use from now on.
<Select a subject> Brightness Contrast MMSI check MMSI entry <CLR Exit / ENT OK>
<Entry a MMSI > ID:(9digit) _____________
Turn power OFF once, then turn it ON again
DS-100#02-(2) 01.12.13 10:53 AM Page 4 (1,1)
phone frequency (Ch 16) automatically.
The controller is still waiting on Ch 70 for an acknowledgment call.
I Distress call/Simple operation
A distress call should be transmitted if, in the opinion of the Master, the ship or a person is in distress and requires immediate assistance. A distress call should include the ships position and time. They are included automatically when a GPS receiver is connected. If no GPS is connected, input them, if possible.
NEVER: USE THE DISTRESS CALL WHEN YOUR SHIP IS NOT IN AN EMERGENCY. DISTRESS CALL CAN BE USED ONLY WHEN IMMEDIATE HELP IS NEEDED.
q Confirm any distress call is not being received. w Lift up the switch cover. Push and hold the [DISTRESS] button for 5 sec. to transmit the distress call.
r When receiving the acknowledgment, reply to the connected station via the transceivers microphone as described on the page at right. NOTE:
Distress alert Completed Now waiting for acknowledgment

<CLRExit>

<Push and hold [DISTRESS] for 5 sec> Nature of distress: Undesignated GPS : UTC 15:22 1234N 12345W
A DSC channel (Ch 70) is automatically selected and the distress call is transmitted. If you have the time, select the nature of the distress and contents. If no GPS is connected, your location and UTC time should be input.
Distress alert (simple operation) contains (default); Kind of distress: Undesignated distress Position data: According to the displayed information. - GPS or manual input position data held for 23.5 hrs. Distress call repeats every 3.54.5 min., until receiving an acknowledgement Beep (Pi,Pi) sounds with the max. volume every 1 sec. Push [DISTRESS] button to transmit a renewed distress call, if desired. Push [CLR] to cancel the Call repeat mode.
The cancel acknowledgement is automatically transmitted when the [CLR] key is pushed.

Push []/[] to move the cursor then push [Y]/[Z] to correct the data Push [CLR] to Exit the menu. Push [A/a], the push [ENT] to enter Null data.
<Input a position> Latitude N Longitude E <A/a Null data> <CLR Exit / ENT OK>
r Enter the longitude data with the key pad. t Push [Y]/[Z] to select E; east longitude or W; west longitude, then push [ENT].
<Input a Time> UTC :
<A/a Null data> <CLR Exit / ENT OK>
DS-100#02-(2) 01.12.13 10:53 AM Page 7 (1,1)
y Push UTC time with the keypad.
Push []/[] to move the cursor then push [Y]/[Z] to correct the data Push [CLR] to Exit the menu. Push [A/a], then push [ENT] to enter Null data.
t Push [ENT] to transfer the instructed trafc channel* to the transceiver.
* Trafc channel is determined by the coast station automatically.
D Individual call to other ships
q Push [CALL], then push [] several times to select Individual call then push [ENT]. w Select manual entry to enter <Select address ID> 9 digit ID or push [] to select the desired ID address. Manual entry Then push [ENT]. DS-100 SN10
Select a trafc CH screen appears.
DS100 SN2 DS100 SN3 <CLR Exit / ENT OK>

I Distress call to ships

General DSC calls may be used for communications after the Distress call, e.g. you want to change the operating mode, frequency, etc.

I Individual call

D Individual call to the coast station
q Push [CALL], then push [] several times to select Individual call then push [ENT]. w Push [] several times to select the coast station ID address. Then push [ENT].
(See page 18 for adding an address.)
e Push [Y]/[Z] to select your desired traffic channel from the list. Then push [ENT]. r Push [CALL] and [ENT] simultaneously to transmit an Individual call.
Push [CLR] to stop the call.
<Input address ID> ID:(9digit)
e Select the coast station ID. e Push [CALL] and [ENT] simultaneously to transmit an Individual call.
<CLR Exit / ENT OK>
r RCV Individual callFrom: Coast stn, appears on the screen. 7
DS-100#02-(2) 01.12.13 10:53 AM Page 8 (1,1)

I Group call

q Push [CALL], then push [] one or more times to select Group call, then push [ENT]. w Select manual entry to enter 8 digit ID or push [] to select the desired ID address. Then push [ENT].
<Select a group> Manual entry ICOM

I All ships call

q Push [CALL], then push [] <Select a category> one or more times to select All ships call, then push Safety [ENT]. Urgency w Select the desired category, then push [ENT]. e To select desired traffic <CLR Exit / ENT OK> channel push [BS] twice and enter channel number.* r Push [CALL] and [ENT] simultaneously to transmit an All ships call.

When the individual ACK function is available When the individual acknowl<Select to comply> edgement function is available on your controller, push [ENT] Able to comply Unable to comply to turn to the <Select to comply> screen. Select Able to comply or Unable to comply. <CLRExit/ ENTOK> Emergency alarm (or continuous beeps depending on the category) sounds until pushing [CLR].
DS-100#02-(2) 01.12.13 10:53 AM Page 12 (1,1)
WHEN RECEIVING A DSC CALL D When receiving a Position request
When receiving a Position request call, an alarm (Pi-pi) sounds. Push [ENT] to transmit your own ships longitude and latitude information. Push [CLR] to record the received information, then the screen goes back to default.
RCV Pos request From: JOHN
D When receiving an All ships call
When receiving a Routine or Safety all ships call, an alarm RCV All ships call (Pi-pi) sounds. When you receive a distress From: 23456789 Category: Routine or Urgency all ships call, an alarm (Pi-po) sounds with max. AF level continuously. Push [CLR] to cancel the <CLRExit/ ENTOK> alarm. Push [ENT], then the operating channel changes to the received trafc channel automatically. Push [CLR] to record the received information, then the screen goes back to default.
To reply, push ENT <CLRExit/ ENTOK>
D When receiving a Position reply
When receiving a Position reply, an alarm (Pi-pi) sounds. Push [CLR] to record the received information, then the screen goes back to default.

RCV Pos reply From: Beck

You must monitor the traffic frequency until you can judge from the call that your action has been effective and/or assistance is unnecessary.
Pos.: Lat 1234N Lon 12345W <CLRExit>
DS-100#02-(2) 01.12.13 10:53 AM Page 13 (1,1)
D When receiving a Distress ACK
When receiving a distress acknowledgement, an alarm (PiRCV Distress ACK po) sounds with max. AF level continuously. And at the same From: Tokyo guard time, the transceivers (ICDistress ID: Mr.Bean M503/M401EURO) operating channel changes to CH 16 automatically. <CLRExit/ ENTOK> Push [CLR] to cancel the alarm. You must monitor CH 16 until you can judge from the call that your assistance is unnecessary.
D When receiving a group call
When receiving a Group call, an alarm (Pi-pi) sounds. RCV Group call Push [ENT], then the operating channel changes to From: DS-100 SN3 Group:Icom Inc the designated channel. Push [CLR] to record the received information, then the screen goes back to de<CLRExit/ ENTOK> fault. The calling station transmits via voice on the designated channel.
D When receiving a Distress Relay ACK
When receiving a Distress Relay acknowledgement, an RCV Distress RLY ACK alarm (Pi-po) sounds with max. AF level continuously. And at From: Tokyo guard Distress ID: the same time, the transceivers 987654321 (IC-M503/M401EURO) operating channel changes to CH 16 <CLRExit/ ENTOK> automatically. Push [CLR] to cancel the alarm. You must monitor CH 16 until you can judge from the call that your assistance is unnecessary. 13

DS-100#02-(2) 01.12.13 10:53 AM Page 14 (1,1)
WHEN RECEIVING A DSC CALL D Distress message
q Push [CALL], then push [] one or more times to select Received calls, then push [ENT]. w Select a Distress message, then push [ENT]. e Select a desired message, then push [ENT]. Push [Y] or [Z] to scroll the message. Push [A/a], then push [1] to clear the message. NOTE: The message number that has not been read yet blinks, e.g. 3.
<Select a message> Distress message Other message
I Received message (RCV MSG)
When receiving a DSC call, the received format is specied and its contents are memorized into the received message (RCV MSG) memory. Distress calls (including other calls with distress category) are stored separately from other calls. Up to 20 distress calls can be memorized and up 20 other categories of calls can be memorized. However, the distress calls are saved until being erased, while other calls are erased when the power is turned OFF.
<Select a subject> Entry Position/Time Individual call Group call All ships call Received calls Distress setting
<Select a message> 1:Distress 2:Distress 3:Distress 4:Distress 12:21 11:21 10:21 09:21
<Message contents> Distress ID: 2345678 Piracy attack Distress time & Pos Time: UTC 12:34 Pos.: Lat 1234N Lon 12345W <A/a Data clear>
DS-100#02-(2) 01.12.13 10:53 AM Page 15 (1,1)

D Other messages

Individual call q Push [CALL], then push [] several times to select Received calls, then push [ENT]. w Select Other message, then push [ENT]. e Select Individual call, then push [ENT]. Push [Y] or [Z] to scroll the message. Push [A/a] to clear the message. Group call q Push [CALL], then push [] several times to select Received calls, then push [ENT]. w Select Other message, then push [ENT]. e Select Group call, then push [ENT]. Push [Y] or [Z] to scroll the message. Push [A/a] to clear the message.
<Select a message> 1:Individual ACK 2:Individual call 3:Group call 4:All ships call 5:Distress 6:Distress relay 7:Distress RLY ACK 8:Distress ACK <CLR Exit / ENT OK>
<Message contents> Routine to Individual From: DS-100 SN3 F3E/G3E simplex CH88 No information <A/a Data clear>
<Message contents> Routine to group From: Phil Collins F3E/G3E simplex CH78 No information
DS-100#02-(2) 01.12.13 10:53 AM Page 16 (1,1)
Distress relay q Push [CALL], then push [] several times to select Received calls, then push [ENT]. w Select Other message, then push [ENT]. e Select Distress relay, then push [ENT]. Push [Y] or [Z] to scroll the message. Push [A/a] to clear the message.

All ships q Push [CALL], then push [] several times to select Re<Message contents> ceived calls, then push [ENT]. Urgency to All ships From: DS-100 SN3 w Select Other message, then F3E/G3E simplex push [ENT]. CH 14 e Select All ships call, then push [ENT]. <A/a Data clear> Push [Y] or [Z] to scroll the message. Push [A/a] to clear the message.
<Message contents> Distress relay From: Phil Collins Distress ID: 2345678 To all ships Fire,Explosion Distress Time & Pos Time: UTC 12:34 Pos.: Lat 1234N Lon 12345W <A/a Data clear>
Distress q Push [CALL], then push [] several times to select Received calls, then push [ENT]. w Select Other message, then push [ENT]. e Select Distress, then push [ENT]. Push [Y] or [Z] to scroll the message. Push [A/a] to clear the message. 16
<Message contents> Routine to group From: Phil Collins F3E/G3E Simplex CH88 No Information <A/a Data clear>
DS-100#02-(2) 01.12.13 10:53 AM Page 17 (1,1)
Distress relay acknowledgement q Push [CALL], then push [] several times to select Re<Select a message> ceived calls, then push [ENT]. 1:Individual ACK 2:Individual call w Select Other message, then 3:Group call push [ENT]. 4:All ships call e Select Distress RLY ACK, 5:Distress then push [ENT]. 6:Distress relay 7:Distress RLY ACK Push [Y] or [Z] to scroll the 8:Distress ACK message. Push [A/a] to clear the mes<CLR Exit / ENT OK> sage. * Please note: Commercial vessels can only transmit distress relay messages. Distress acknowledgement q Push [CALL], then push [] several times to select Received calls, then push [ENT]. w Select Other message, then push [ENT]. e Select Distress ACK, then push [ENT]. Push [Y] or [Z] to scroll the message. Push [A/a] to clear the message.
<Message contents> Distress RLY ACK From: Mr.Comfort Distress ID: Mrs.John Fire,Explosion Distress Time & Pos Time: UTC 12:34 Pos.: Lat 1234N Lon 12345W <A/a Data clear>
<Message contents> Distress ACK From: Mr.Fortune Distress ID: Mrs.John Fire,Explosion Distress Time & Pos Time: UTC 12:34 Pos.: Lat 1234N Lon 12345W <A/a Data clear>
DS-100#02-(2) 01.12.13 10:53 AM Page 18 (1,1)

SET-UP

I Address ID
A total of 70 address IDs can be programmed as Address ID (for ships and coast stations) and Group ID (for group station). Adding an address ID q Push []/[] several times to select Add an address ID, then push [ENT]. w Push the numeral keys to input an address ID code, then push [ENT].
When a wrong number is input, push [CLR], then enter the number again.
<Select a subject> Add an address ID Delete address ID Add a group ID Delete a group ID <CLRExit / ENTOK>

I Select Set-up

The following setting/operations are available in Set-up menu. Address ID Offset time Brightness Contrast MMSI check
q Push [CALL], then push [] several times to select Setup, then push [ENT]. Set-up menu appears on the screen. w Push [CLR] to exit the Set-up menu.
<Select a subject> Individual ACK Group call All ships call Received calls Distress setting Set-up
<Add an address ID>a* ID:(9digit) Name:(15characters)
e Enter the desired name for the ID code, then push [ENT].
<Select a subject> Address ID Offset time Brightness Contrast MMSI CHECK <CLRExit / ENTOK>
Push [A/a] several times to toggle capital letters, small letters <CLRExit / ENTOK> and numerals. Push the corresponding key one or more times to input the desired character. Push [BS] to erase the character. Push [] to reverse the cursor position; [] to forward the cursor position.
r Push [CLR] to exit the screen.
DS-100#02-(2) 01.12.13 10:53 AM Page 19 (1,1)
Delete address ID q Push [] to select Delete address ID, then push [ENT]. w Push []/[] several times to select a desired address ID that you want to delete, then push [ENT].
Address ID and name is displayed on the screen.
<Delete address ID> DS-100 SN10 DS-100 SN2 DS-100 SN3 DS-100 SN4 <CLRExit/ENTOK>
Add a group ID q Push []/[] several times to select Add a group ID, then push [ENT]. w Push numeral keys to input an address ID code, then push [ENT].

<Add a group ID>

ID:(8digit) 0 Name:(15characters)

<CLRExit / ENTOK>

e Push [ENT] to delete the address ID. Push [CLR] to exit the screen. r Push [CLR] to exit the menu.
<Delete this ID> ID:(9digit) 2673500100 Name:(15characters) DS-100 SN10 <CLRExit / ENTOK>
Push [A/a] several times to toggle capital letters, small letters and numerals. Push the corresponding key one or more times to input the desired character. Push [BS] to erase the character. Push [] to reverse the cursor position; [] or forward the cursor position.
r Push [CLR] to exit the screen. Delete a group ID q Push [] to select Delete a group ID, then push [ENT]. w Push []/[] several times to select a desired address ID that you want to delete, then push [ENT]. Address ID and name is displayed on the screen. e Push [ENT] to delete the address ID. Push [CLR] to exit the screen. r Push [CLR] to exit the menu. 19

DS-100#02-(2) 01.12.13 10:53 AM Page 20 (1,1)

I Offset time

Local time can be used when the GPS position data is valid and offset time is input.
<Offset time> 09:30

I Contrast

Adjusting the contrast q Push [CALL], then push [] one or more times to select Set-up, then push [ENT]. w Select Contrast, then push [ENT]. e Push [Y] or [Z] one or more times (or numeral keys instead) to adjust the contrast. Contrast level indication; 1 (low) to 8 (high) r Push [ENT] to determine the brightness or push [CLR] to exit the Set-up menu.
q Push [CALL], then push [] one or more times to select <CLRExit / ENTOK> Set-up, then push [ENT]. w Select Offset time, then push [ENT]. e Push 0; or 1; space, then input the time differences. r Push [ENT] to determine the time or push [CLR] to exit the Set-up menu.

I MMSI check

Your ID code can be displayed via the set-up menu. Check your ID q Push [CALL], then push [] <MMSI check> one or more times to select Set-up, then push [ENT]. 267350012 w Select MMSI check, then push [ENT]. e Your ID code shows on the display. <CLR Exit> r Push [CLR] to exit the Set-up menu.

I Brightness

Adjusting the brightness q Push [CALL], then push [] one or more times to select Set-up, then push [ENT]. w Select Brightness, then push [ENT]. e Push [Y] or [Z] one or more times (or numeral keys instead) to adjust the brightness. Brightness level indication; 1 (dark) to 8 (bright) r Push [ENT] to determine the brightness or push [CLR] to exit the Set-up menu. 20
DS-100#02-(2) 01.12.13 10:53 AM Page 21 (1,1)
CONNECTIONS AND INSTALLATION
I Connection diagram (Connection exsample with IC-M503)

13.8V DC

IC-M503 (or IC-M401EURO)

DS-100 (#02)

NOTE: Binding the GPS cable, GPS connector, clone receptacle, antenna connector with water-resistant tape, increases the waterproong of the controller.
DS-100#02-(2) 01.12.13 10:53 AM Page 22 (1,1)
CONNECTION AND INSTALLATION

I Rear panel description

q CONNECTION CABLE Connects to the IC-M503 (or IC-M401EURO) rear DSC controller receptacle. w RECEIVE ANTENNA CONNECTOR Connects a marine VHF receiving antenna with a PL-259 plug for emergency frequency signal receiving. Receiving frequency : 156.525 MHz Keep the emergency frequency signal receiving antenna away from the marine VHF antenna to avoid interference from the emitted RF signal. e CLONE RECEPTACLE For dealer use only. r GPS RECEIVER CONNECTOR Connects a GPS receiver (NMEA0183 ver.2.0) for sending position data without manual input. t EXTERNAL MICROPHONE CONNECTOR (IC-M503)* Connects to the optional HM-134 REMOTE-CONTROL MICROPHONE. Intercom function is available. CAUTION: NEVER connect another microphone such as the HM-127, etc. It may cause damage to the transceiver. y ANTENNA CONNECTOR (IC-M503)* Connects a marine VHF antenna with a PL-259 connector to the transceiver. u EXTERNAL SPEAKER RECEPTACLE (IC-M503)* Connects to an external speaker. i DC POWER CONNECTOR (IC-M503)* Connects the DC power cable supplied with IC-M503 (or IC-M401EURO), from this connector to an external 12 V DC power source. *Refer to the IC-M503 (or IC-M401EURO) instruction manual.

I Supplied accessories

q Knob bolt (2040 knob bolt).. 2 w Mounting bracket (2345 Mobile bracket).. 1 e Spring washers (M 5 ).. 2 r Self-tapping screws (A05 x 20).. 2 t Flat washers (M 5)... 2 y Label (2349 CAUTION seal-R).. 1
DS-100#02-(2) 01.12.13 10:53 AM Page 23 (1,1)

I Mounting

The universal mounting bracket supplied with your controller allows dashboard or overhead mounting. Please read the following instructions carefully. Mount the controller securely with bolts and nuts or it may come loose as a result of wave shocks or vibration. Mount the controller so that the face of the controller is at 90 degrees to your line of sight when operating it.

OVERHEAD MOUNTING

CAUTION!
KEEP the controller at least 1 m away from your ships magnetic navigation compass. CHECK the installation angle; the function display may not be easy-to-read at some angles. DASHBOARD MOUNTING (with optional MB-75): For mounting the DS-100 to a dashboard panel.
DS-100#02-(2) 01.12.13 10:53 AM Page 24 (1,1)
CH 156.050 156.100 156.150 156.200 156.250 156.300 156.350 156.400 156.450 156.500

VHF MARINE CHANNEL LIST

International channels
Frequency (MHz) Transmit Receive 160.650 160.700 160.750 160.800 160.850 156.300 160.950 156.400 156.450 156.500 CH Frequency (MHz) Transmit Receive 156.550 156.600 156.650 156.700 156.750 156.800 156.850 156.900 156.950 157.000 156.550 156.600 156.650 156.700 156.750 156.800 156.850 161.500 161.550 161.600 CH Frequency (MHz) Transmit Receive 157.050 157.100 157.150 157.200 157.250 157.300 157.350 157.400 156.025 156.075 161.650 161.700 161.750 161.800 161.850 161.900 161.950 162.000 160.625 160.675 CH Frequency (MHz) Transmit Receive 156.125 156.175 156.225 156.275 156.325 156.375 156.425 156.475 156.525 156.575 160.725 160.775 160.825 160.875 160.925 156.375 156.425 156.475 156.525 156.575 CH Frequency (MHz) Transmit Receive 156.625 156.675 156.725 156.775 156.825 156.875 156.925 156.975 157.025 157.075 156.625 156.675 156.725 156.775 156.825 156.875 161.525 161.575 161.625 161.675 CH 88 Frequency (MHz) Transmit Receive 157.125 157.175 157.225 157.275 157.375 157.325 157.375 157.425 161.725 161.775 161.825 161.875 161.975 161.925 162.025 157.375 157.425.162025

DS-100#02-(2) 01.12.13 10:53 AM Page 25 (1,1)
SPECIFICATIONS AND OPTIONS

I Specications

General
: 156.525 MHz : 16K0G2B : 20C to +60C; 4F to +140F Dimensions : 165(W) 110(H) 80(D) mm (projections not included) 6.5 (W) 4.33(H) 3.15(D) in Weight : 1 Kg; 2.2 lb Receive system : Double-conversion superheterodyne Intermediate frequencies : 1st 21.70 MHz 2nd 450 kHz Sensitivity : 10 dB typ. Intermodulation rejection ratio : More than 68 dB Adjacent channel selectivity : More than 73 dB Spurious response rejection ratio : More than 73 dB *Measurement methods according to EN Operating frequency Mode Operating temperature range

I Options

MB-75 FLUSH MOUNT KIT For mounting the DS-100 to a panel.
DS-100#02-(2) 01.12.13 10:53 AM Page 26 (1,1)

DIMENSIONS

165.0 31.4 145.0 53.0 25.0

(Unit: mm)

DS-100#02-(2) 01.12.13 10:53 AM Page 27 (1,1)

MB-75 (OPTION)

I MB-75 FLUSH MOUNT KIT
The MB-75 is used to mount the DS-100 DSC CONTROLLER ush to a at surface such as an instrument panel. Supplied accessories Clamps.1 set
Instructions q Using the template (p. 29), carefully cut a hole into the instrument panel (or wherever you plan to mount the controller) and slide the controller through the hole on the rear panel.
w Attach the 2 supplied bolts on either side of the DS-100 (See next page.)
DS-100#02-(2) 01.12.13 10:53 AM Page 28 (1,1)
r Tighten the end bolts on the clamps (rotate clockwise) so that the clamps press firmly against the inside of the instrument control panel.
e Attach the clamps on either side of the DS-100 as shown below. Make sure that the clamps align parallel to the DS-100s body.
t Tighten the locking nuts (rotate counterclockwise) so that the DS-100 is securely mounted in position as below. y Connect the antenna and control cable, then return the instrument control panel to its original place.
DS-100#02-(2) 01.12.13 10:53 AM Page 29 (1,1)

TEMPLATE

Cut on the inside of the line. 149 (57/8)

4R11(7/16)

Cut here

Unit: mm (inch) 29

92 (35/8)
DS-100#02-(2) 01.12.13 10:53 AM Page 30 (1,1)

DS-100#02-(2) 01.12.13 10:53 AM Page 31 (1,1)
DECLARATION OF CONFORMITY

We Icom Inc. Japan

1-1-32 Kamiminami, Hirano-ku Osaka 547-0003 Japan Declare on our sole responsibility that this equipment complies the essential requirements of the Radio and Telecommunications Terminal Equipment Directive, 1999/5/EC, and that any applicable Essential Test Suite measurements have been performed. Kind of equipment: Type-designation: DSC CONTROLLER
Dsseldorf 31st May 2001 Place and date of issue

Icom (Europe) GmbH

ds-100
Himmelgeister strae 100 D-40225 Dsseldorf Authorized representative name
Version (where applicable): This compliance is based on conformity with the following harmonised standards, specifications or documents: i) EN 301 025-1 V1.1.2 (2000-08) ii) EN 301 025-2 V1.1.1 (2000-08) iii) EN 301 025-3 (2001-05) iv) EN v) EN 60950 1992
T. Maebayashi General Manager

Signature

DS-100#02-(2) 01.12.13 10:53 AM Page 32 (1,1)

Count on us!

< Intended Country of Use >

GER AUT GBR IRL FRA

NED BEL LUX ESP POR

ITA GRE SWE DEN FIN

A-6066H-1EU-w Printed in Japan 2001 Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan

doc1

0 IC-M401EURO_

(2).qxd 01.12.10 11:16 AM Page a (1,1)

INSTRUCTION MANUAL

VHF MARINE TRANSCEIVER

iM401EURO

(2).qxd 01.12.10 11:16 AM Page b (1,1)

IN CASE OF EMERGENCY

If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. Or, transmit your distress call using digital selective calling on Channel 70 (the optional DS-100 (#02) must be installed).
USING CHANNEL 16 DISTRESS CALL PROCEDURE 1. MAYDAY MAYDAY MAYDAY. 2. THIS IS.. (name of vessel) 3. Your call sign or other indication of the vessel (AND 9-digit DSC ID if you have one). 4. LOCATED AT.. (your position) 5. The nature of the distress and assistance required. 6. Any other information which might facilitate the rescue.
USING DIGITAL SELECTIVE CALLING (ch 70)
(DS-100 DSC CONTROLLER is required)
DISTRESS CALL PROCEDURE 1. Push and hold [DISTRESS] on the DS-100 for 5 sec. until you hear 5 short beeps change to one long beep. 2. Wait for an acknowledgment from a coast station.
Channel 16 is automatically selected.
3. Push and hold [PTT], then transmit the appropriate information as at left.
Versions of the IC-M401EURO which display the CE symbol on the serial number seal, comply with the essential requirements of the European Radio and Telecommunication Terminal Directive 1999/5/EC. This warning symbol indicates that this equipment operates in non-harmonised frequency bands and/or may be subject to licensing conditions in the country of use. Be sure to check that you have the correct version of this radio or the correct programming of this radio, to comply with national licensing requirement. Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United states, the United Kingdom, Germany, France, Spain, Russia and/or other countries.
(2).qxd 01.12.10 11:16 AM Page c (1,1)

INSTALLATION NOTES

The installation of this equipment should be made in such a manner as to respect the EC recommended electromagnetic field exposure limits (1999/519/EC). The maximum RF power available from this device is 25 watts. The antenna should be installed as high as possible for maximum efficiency and that this installation height should be at least 5 meters above ground (or accessible) level. In the case where an antenna cannot be installed at a reasonable height, then the transmitter should neither be continuously operated for long periods if any person is within 5 meters of the antenna, nor operated at all if any person is touching the antenna. In all cases any possible risk depends on the transmitter being activated for long periods. (actual recommendation limits are specied as an average of 6 minutes) Normally the transmitter is not active for long periods of time. Some radio licenses will require that a timer circuit automatically cuts the transmitter after 12 minutes etc. Similarly some types of transmitter, SSB, CW, AM, etc. have a lower average output power and the perceived risk is even lower.

TABLE OF CONTENTS

1 OPERATING RULES. PANEL DESCRIPTION. I Panel description.. 2 I Function display. 3 I Microphone.. BASIC OPERATION.. I Channel selection.. 6 I Receiving and transmitting. 8 I Call channel programming.. 9 I Memory channel names. DUALWATCH/TRI-WATCH. 1011 I Description.. 10 I Operation.. SCAN OPERATION. I Scan types.. 12 I Setting tag channels.. 13 I Starting a scan. SET MODE.. I Set mode programming.. 14 I Set mode items.. CONNECTIONS AND MAINTENANCE.. I Unpacking.. 16 I Antenna... 16 I Fuse replacement. 16 I Cleaning... 16 I Connections.. 17 I Mounting the transceiver.. 18 I Dimensions.. TROUBLESHOOTING.. CHANNEL LIST.. SPECIFICATIONS AND OPTIONS. 24 I Specications.. 24 I Options.. 24 MB-69 TEMPLATE

(2).qxd 01.12.10 11:16 AM Page d (1,1)

IMPORTANT

READ ALL INSTRUCTIONS carefully and completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL This instruction manual contains important operating instructions for the IC-M401EURO.

CAUTION

RWARNING! NEVER connect the transceiver to an AC
outlet. This may pose a fire hazard or result in an electric shock.
DO NOT use or place the transceiver in areas with temperatures below 20C or above +60C or, in areas subject to direct sunlight, such as the dashboard. AVOID the use of chemical agents such as benzine or alcohol when cleaning, as they may damage the transceiver surfaces. BE CAREFUL! The transceiver rear panel will become
hot when operating continuously for long periods. Place the transceiver in a secure place to avoid inadvertent use by children. After exposure to salt water, clean the transceiver thoroughly with fresh water to avoid corrosion. Do not pour water on the transceiver under the water tap directly.
NEVER connect the transceiver to a power source of more than 16 V DC or using reverse polarity. This will ruin the transceiver. NEVER cut the DC power cable between the DC plug and
fuse holder. If an incorrect connection is made after cutting, the transceiver may be damaged.
NEVER place the transceiver where normal operation of the
vessel may be hindered or where it could cause bodily injury.
KEEP the transceiver at least 1 m away from the ships navigation compass.
(2).qxd 01.12.10 11:16 AM Page 1 (1,1)

OPERATING RULES

PRIORITIES
Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy. Safety and distress calls take priority over all others. You must monitor Channel 16 when you are not operating on another channel. False or fraudulent distress signals are prohibited and punishable by law.
(2) OPERATORS LICENSE A Restricted Radiotelephone Operator Permit is the license most often held by small vessel radio operators when a radio is not required for safety purposes. The Restricted Radiotelephone Operator Permit must be posted or kept with the operator. Only a licensed radio operator may operate a transceiver. However, non-licensed individuals may talk over a transceiver if a licensed operator starts, supervises, ends the call and makes the necessary log entries. Keep a copy of the current government rules and regulations handy.

PRIVACY

Information overheard but not intended for you cannot lawfully be used in any way. Indecent or profane language is prohibited.

RADIO LICENSES

(1) SHIP STATION LICENSE You must have a current radio station license before using the transceiver. It is unlawful to operate a ship station which is not licensed. Inquire through your dealer or the appropriate government agency for a Ship-Radiotelephone license application. This government-issued license states the call sign which is your crafts identication for radio purposes. 1
(2).qxd 01.12.10 11:16 AM Page 2 (1,1)

PANEL DESCRIPTION

The European version has International channels only and this function is not available.

I Panel description

Speaker

Function display q

Starts dualwatch or tri-watch when pushed for 1 sec. Stops dualwatch/tri-watch when either is activated. t CHANNEL 16/CALL CHANNEL SWITCH [16] Selects Channel 16 when pushed. (p. 6) Selects call channel when pushed for 1 sec. (p. 6)
CALL appears when call channel is selected.

iC-m401euro

q POWER/VOLUME CONTROL [VOL] Turns power ON and OFF and adjusts the audio level. (p. 8) w SQUELCH CONTROL [SQL] Sets the squelch threshold level. (p. 8) e TRANSMIT POWER SWITCH [H/L] Toggles high and low power when pushed. (p. 8)
Some channels are set to low power only.
Push for 3 sec. to enter call channel programming condition when call channel is selected. (p. 9) While pushing [H/L], enters memory channel name programming condition. (p. 9) Enters set mode when pushed while turning power ON. (p. 14) Y Z y CHANNEL UP/DOWN SWITCHES [Y]/[Z] Push to select the operating channels, set mode contents, etc. While pushing [H/L], push [Y]/[Z] to adjust the brightness of the LCD and switch backlight. u SCAN SWITCH [SCN] (p. 13) Starts and stops normal or priority scan when tag channels are programmed. i TAG CHANNEL SWITCH (p. 13) Push [TAG] to set the displayed channel as a tag (scanned) channel. While pushing [H/L], push for 3 sec. to clear all tag channels.
While pushing this switch, other switches perform secondary functions. r CHANNEL/DUALWATCH/TRI-WATCH SWITCH [CH] Exits from Channel 16 or call channel when pushed. (p. 6) While pushing [H/L], selects channel group when pushed. (p. 7) 2
(2).qxd 01.12.10 11:16 AM Page 3 (1,1)

I Function display

!0 q w e r t y u
y ATIS INDICATOR ATIS appears when the ATIS encoder is activated.
The ATIS encoder is available for Germany and Holland versions only.

u DUPLEX INDICATOR (p. 7) Appears when a duplex channel is selected. i CHANNEL NAME INDICATOR Memory channel name appears if programmed. (p. 9) scrolls when the battery voltage drops to approx. 10 V DC or below. appears during dualwatch; appears during triwatch. (p. 10) o CHANNEL GROUP INDICATOR (p. 7) Indicates whether an International (I) or U.S.A (U) channel is selected.
USA channel group is available for U.K. and Italy versions only.
q TRANSMIT INDICATOR (p. 8) TX appears while transmitting. w BUSY INDICATOR (p. 8) BUSY appears when receiving a signal or when the squelch opens. e TAG CHANNEL INDICATOR (p. 13) Appears when a tag channel is selected. r CALL CHANNEL INDICATOR CALL appears when the call channel is selected. (p. 6) t LOW POWER INDICATOR (p. 8) LOW appears when low power is selected.
!0 CHANNEL NUMBER READOUT Indicates the selected operating channel number.
A appears when a simplex channel is selected. (p. 7)
In set mode, indicates the selected condition. (p. 15)
(2).qxd 01.12.10 11:16 AM Page 4 (1,1)
e CHANNEL 16/CALL CHANNEL SWITCH [16/C] Same as the [16] switch on the front panel. (p. 2) Selects Channel 16 when pushed. (p. 6) Selects call channel when pushed for 1 sec. (p. 6)

I Microphone

Microphone
Push for 3 sec. to enter call channel programming condition when call channel is selected. (p. 9) While pushing [H/L], enters memory name programming condition. (p. 9)
Microphone lock function q PTT SWITCH [PTT] Push and hold to transmit; release to receive. (p. 8) Y Z w CHANNEL UP/DOWN SWITCHES [Y]/[Z] Push either switch to change the operating memory channel, set mode contents, etc. The microphone lock function electrically locks the [Y]/[Z] and [16/C] switches on the microphone. This prevents accidental channel changes and accidental function access. While pushing [16] on the microphone, turn power ON to toggle the microphone lock function ON and OFF.
(2).qxd 01.12.10 11:16 AM Page 5 (1,1)

Blank page

(2).qxd 01.12.10 11:16 AM Page 6 (1,1)

BASIC OPERATION

Call channel
Each regular channel group has a separate leisure-use call channel. The call channel is monitored during tri-watch. The call channels can be programmed (p. 9) and are used to store your most often used channels in each channel group for quick recall. Push [16] for 1 sec. to select the call channel of the selected channel group.
CALL and call channel number appear. Each channel group may have an independent call channel after changing a call channel. (U.K. version only)

I Channel selection

Channel 16
Channel 16 is the distress and safety channel. It is used for establishing initial contact with another station and for emergency communications. Channel 16 is monitored during both dualwatch and tri-watch. While standing by, you must monitor Channel 16. Push [16] momentarily to select Channel 16.
Output power turns to 25W automatically, whenever Channel 16 is selected. For example, when selecting Channel 16 via the dial, dualwatch/tri-watch or a scan stops at Channel 16, etc.
Push [CH] to return to the condition before selecting Channel 16, or push [Y]/[Z] to select an operating channel.
Push [CH] to return to the condition before selecting call channel, or push [Y]/[Z] to select an operating channel.
(2).qxd 01.12.10 11:16 AM Page 7 (1,1)
BASIC OPERATION International channels
There are 57 International channels for the IC-M401EURO. q Push [CH] to select a regular channel. w While pushing [H/L], push [CH] to change the channel group, if necessary.
I appears when International channels are selected.
U.S.A. channels (U.K. version only) For the U.K. and Italy versions, there are 58 U.S.A. channels in addition to 57 International channels.
q Push [CH] to select a regular channel. w While pushing [H/L], push [CH] to change the channel group.
International and U.S.A. channels can be selected in sequence.
e Push [Y]/[Z] to select the desired channel.
D appears for duplex channels.

Channels are memorized separately for each channel group.

TX BUSY

TAG CALL

LOW ATIS D WX ALT

GPS DSC POS REPLY
(2).qxd 01.12.10 11:16 AM Page 8 (1,1)
I Receiving and transmitting
CAUTION: Transmitting without an antenna may damage the transceiver. q Turn [VOL] clockwise to turn power ON. w Set the audio and squelch levels. Rotate [SQL] fully counterclockwise in advance. Rotate [VOL] to adjust the audio output level. Rotate [SQL] clockwise until the noise disappears. e While pushing [H/L], push [CH] to change the channel group. (p. 7)
The European version has International channels only.
IMPORTANT: To maximize the readability of your transmitted signal, pause a few sec. after pushing [PTT], hold the microphone 2 to 5 cm from your mouth and speak at a normal voice level.
r Push [Y]/[Z] to select the desired channel.
When receiving a signal, BUSY appears and audio is emitted from the speaker. Further adjustment of [VOL] may be necessary at this point.
t Push [H/L] to select the output power if necessary.
LOW appears when low power is selected, respectively. Choose low power to conserve power, choose high power for longer distance communications. Some channels are for low power only.
y Push and hold [PTT] to transmit, then speak into the microphone.
TX appears. Channel 70 cannot be used for transmission (for GMDSS use).
u Release [PTT] to receive. 8
(2).qxd 01.12.10 11:16 AM Page 9 (1,1)
I Call channel programming
The call channel is used to select Channel 9, however, you can program your most often-used channels in each channel group for quick recall. q While pushing [H/L], push [CH] one or more times to select the desired channel group (International or U.S.A.) to be programmed. (U.S.A. channel group is available for UK and Italy versions only.) w Push [16] for 1 sec. to select the call channel of the selected channel group.
CALL and call channel number appear.

I Memory channel names

Memory channels can be tagged with alphanumeric names of up to 10 characters each. Capital letters, small letters, numerals, some symbols (! " # $ % & ' ( ) + , . ) and spaces can be used. q Select the desired memory channel.
Cancel dual watch, tri-watch or scan in advance.
w While pushing [H/L], push [16] to edit memory channel name.
A cursor appears and blinks.
e Push [16] again for 3 sec. (until long beep changes to 2 short beeps) to enter call channel programming condition.
Channel number starts ashing.
r Push [Y]/[Z] to select the desired channel. t Push [16] to program the displayed channel as the call channel.

Push [CH] to cancel. The channel number stops ashing.
e Select the desired character by pushing [Y]/[Z].
Push [CH] or [H/L] for cursor movement.
r Push [16] to input and set the name.

TAG CALL D

Push [H/L] to cancel. The cursor disappears.
t Repeat steps q to r to program other memory channel names, if desired.
(2).qxd 01.12.10 11:16 AM Page 10 (1,1)

DUALWATCH/TRI-WATCH

I Operation
q Select the desired operating channel. w Select dualwatch or tri-watch in set mode. (p. 15) e Push [CH] for 1 sec. to start dualwatch or tri-watch.
appears during dualwatch; appears during tri-watch. Beep tone sounds when a signal is received on Channel 16.

I Description

Dualwatch monitors Channel 16 while you are receiving another channel; tri-watch monitors Channel 16 and the call channel while receiving another channel. DUALWATCH/TRI-WATCH SIMULATION
If a signal is received on Channel 16, dualwatch/tri-watch pauses on Channel 16 until the signal disappears. If a signal is received on the call channel during tri-watch, tri-watch becomes dualwatch until the signal disappears. To transmit on the selected channel during dualwatch/tri-watch, push and hold [PTT].
r To cancel dualwatch/tri-watch, push [CH] again.

Dualwatch

Tri-watch
(2).qxd 01.12.10 11:16 AM Page 11 (1,1)
[Example] Operating dualwatch on INT Channel 25 Operating tri-watch on INT Channel 25

Dualwatch starts.

Tri-watch starts.
Signal received on Channel 16 takes priority.
Signal is received on call channel.
Tri-watch becomes dualwatch and monitors Channel 16 while receiving signal.

TAG TAG

Dualwatch resumes after the signal disappears.
Tri-watch resumes after the signal disappears.
(2).qxd 01.12.10 11:16 AM Page 12 (1,1)

SCAN OPERATION

I Scan types
Scanning is an efcient way to locate signals quickly over a wide frequency range. The transceiver has priority scan and normal scan. Set the tag channels (scanned channel) before scanning. Clear the tag channels which inconveniently stop scanning, such as channels used for digital communication. Choose priority or normal scan in set mode. (p. 15)

PRIORITY SCAN

CH 01 CH 02

NORMAL SCAN

Priority scan searches through all tag channels in sequence while monitoring Channel 16. When a signal is detected on Channel 16, scan pauses until the signal disappears; when a signal is detected on a channel other than Channel 16, scan becomes dualwatch until the signal disappears. 12
Normal scan, like priority scan, searches through all tag channels in sequence. However, unlike priority scan, Channel 16 is not checked unless Channel 16 is set as a tag channel.
(2).qxd 01.12.10 11:16 AM Page 13 (1,1)

I Setting tag channels

For more efficient scanning, add desired channels as tag channels or clear tag channels for unwanted channels. Channels set as non-tag channels will be skipped during scanning. Tag channels can be assigned to each channel group independently. q While pushing [H/L], push [CH] one or more times, select the desired channel group, if desired. (U.S.A. channel group is available for UK and Italy versions only.) w Select the desired channel to set as a tag channel. e Push [TAG] to set the displayed channel as a tag channel.
TAG appears in the function display.

I Starting a scan

Set scan type (priority or normal scan) and scan resume timer in advance using set mode. (p. 15) q Set tag channels as described at left. w While pushing [H/L], push [CH] one or more times, select the desired channel group, if desired. (U.S.A. channel group is available for UK and Italy versions only.) e Push [SCN] to start priority or normal scan.
SC 16 or SCAN appears in the function display. When a signal is detected, scan pauses until the signal disappears or resumes after pausing 5 sec., according to set mode setting. (Channel 16 is still monitored during priority scan.) Push [Y]/[Z] to check the scanning tag channels, to change the scanning direction or resume the scan manually. 16 ashes and a beep tone sounds when a signal is received on Channel 16 during priority scan.
r To cancel the tag channel setting, repeat e.

TAG disappears.

Clearing all tag channels in the selected channel group While pushing [H/L], push [TAG] for 3 sec. to clear all tag channels in the channel group. [Example]: Starting a priority scan.

r To stop the scan, push [SCN].
SC 16 or SCAN disappears.

Push [SCN]

Scan starts.
When a signal is received
(2).qxd 01.12.10 11:16 AM Page 14 (1,1)

SET MODE

I Set mode programming
Set mode is used to change the conditions of some of the transceivers functions. NOTE: Available functions may differ depending on dealer setting.

Entering set mode

q Turn power OFF. w While pushing [16], turn power ON to enter set mode. e After the display appears, release [16]. r Push [16] to select the desired item, if necessary. t Push [Y]/[Z] to select the desired condition of the item. y Turn power OFF, then ON again to exit set mode.

SET MODE CONSTRUCTION

Scan mode

Scan resume timer

Dual/tri watch

LCD contrast Beep tone

(2).qxd 01.12.10 11:16 AM Page 15 (1,1)

I Set mode items

The scan mode can be selected as a normal scan or priority scan. (p. 12)

Dualwatch/tri-watch

This item can be selected as dualwatch or tri-watch. (p. 10)
Dual watch (default) Priority scan (default) Normal scan
Beep tone Scan resume timer
The scan resume timer can be selected as a pause (OFF) or timer scan (ON). When OFF is selected, the scan pauses until the signal disappears. When ON is selected, the scan pauses 5 sec. and resumes even if a signal is being received on channels except for Channel 16. You can select silent operation by turning beep tones OFF, or you can have confirmation beeps sound at the push of a switch by turning beep tones ON.

Beep tone ON (default)

Beep tone OFF

LCD contrast

Scan timer OFF (default) Scan timer ON
This item adjusts the contrast of the LCD in 4 steps.

LCD contrast 3 (default)

(2).qxd 01.12.10 11:16 AM Page 16 (1,1)
CONNECTIONS AND MAINTENANCE

I Antenna

A key element in the performance of any communication system is an antenna. Ask your dealer about antennas and the best places to mount them.

I Unpacking

The following accessories are supplied: Qty. q Mounting bracket.. 1 w DC power cable (OPC-891).. 1 e Microphone hanger... 1 r Microphone hanger cable* (OPC-1096 : Black or OPC-1097 : White).. 1 t Mounting bracket knobs.. 2 y Microphone hanger screws (mm).. 2 u Mounting screws (mm)... 2 i Flat washers (M5)... 2 o Spring washers (M5).. 2 *Depending on version.

CAUTION: KEEP the transceiver and microphone at least 1 meter away from your vessels magnetic navigation compass.
NOTE: Check the installation angle; the function display may not be easy-to-read at some angles.
(2).qxd 01.12.10 11:16 AM Page 19 (1,1)
CONNECTIONS AND MAINTENANCE Using the optional mounting bracket
An optional MB-69 FLUSH MOUNT is available for mounting the transceiver to a at surface such as an instrument panel.
e Attach the clamps on either side of the transceiver with 2 supplied bolts (mm).
Make sure that the clamps align parallel to the transceiver body.
q Using the template on the last page, carefully cut a hole into the instrument panel (or wherever you plan to mount the transceiver). w Slide the transceiver through the hole as shown below. r Tighten the end bolts on the clamps (rotate clockwise) so that the clamps press firmly against the inside of the instrument control panel. t Tighten the locking nuts (rotate counterclockwise) so that the transceiver is securely mounted in position as below. y Connect the antenna and control cable, then return the instrument control panel to its original place.
(2).qxd 01.12.10 11:16 AM Page 20 (1,1)

I Dimensions

32.1 mm 86.5 mm 23 mm

153 mm

136 mm
(2).qxd 01.12.10 11:16 AM Page 21 (1,1)
(2).qxd 01.12.10 11:16 AM Page 22 (1,1)

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
Bad connection to the power supply. Squelch level is too deep. Volume level is too low. Speaker has been exposed to water.

SOLUTION

Set squelch to the threshold point. Set [VOL] to a suitable level. Drain water from the speaker. Change channels. Push [H/L] to select high power. Set the desired channels as TAG channels. Turn the beep tone ON in set mode.
p. 8 p. 8 pgs. 8, 23 p. 8 p. 13 p. 15
No power comes ON. No sound comes from the speaker.
Check the connection to the transceiver. p. 17
Transmitting is impossible, Some channels are for low power or or high power cannot be selected. Scan does not start. No beep sounds. receive only. The output power is set to low. TAG channel is not programmed. Beep tone is turned OFF.
(2).qxd 01.12.10 11:16 AM Page 23 (1,1)

CHANNEL LIST

International channels
CH Frequency (MHz) Transmit 156.050 156.100 156.150 156.200 156.250 156.300 156.350 156.400 156.450 156.500 Receive 160.650 160.700 160.750 160.800 160.850 156.300 160.950 156.400 156.450 156.500 CH Frequency (MHz) Transmit 156.550 156.600 156.650 156.700 156.800 156.900 156.950 157.000 Receive 156.550 156.600 156.650 156.700 156.750 156.800 156.850 161.500 161.550 161.600 CH Frequency (MHz) Transmit 157.050 157.100 157.150 157.200 157.250 157.300 157.350 157.400 156.025 156.075 Receive 161.650 161.700 161.750 161.800 161.850 161.900 161.950 162.000 160.625 160.675 CH 71 Frequency (MHz) Transmit 156.125 156.175 156.225 156.275 156.325 156.375 156.425 156.475 156.575 Receive 160.725 160.775 160.825 160.875 160.925 156.375 156.425 156.475 156.525 156.575 CH 74 Frequency (MHz) Transmit 156.625 156.675 156.725 Receive 156.625 156.675 156.725 156.775 156.825 156.875 161.525 161.575 161.625 161.675 CH 88

Receive 161.725 161.775 161.825 161.875 161.925 157.375 157.425
Frequency (MHz) Transmit 157.125 157.175 157.225 157.275 157.325 157.375 157.425
75 156.156.156.875 156.925 156.975 157.025 157.075

15 156.156.850

70 156.525
USA channels (for U.K. version only)
CH Frequency (MHz) Transmit ----156.300 156.400 156.450 156.500 156.550 Receive 156.050 --156.150 --156.250 156.300 156.350 156.400 156.450 156.500 156.550 CH 16 Frequency (MHz) Transmit 156.600 156.700 156.800 Receive 156.600 156.650 156.700 156.750 156.800 156.850 156.900 156.950 161.600 157.000 157.050 CH Frequency (MHz) Transmit Receive 157.100 157.150 161.800 161.850 161.900 161.950 162.000 157.850 156.075 --156.175 CH Frequency (MHz) Transmit Receive 156.225 156.275 156.325 156.375 156.425 156.475 156.525 156.575 156.625 156.675 156.725 CH 77 Frequency (MHz) Transmit 156.875 Receive 156.875 156.925 156.975 157.025 157.075 157.125 157.175 161.825 157.225 161.875 157.275 CH 88 Frequency (MHz) Transmit 157.325 157.375 157.425 Receive 161.925 157.325 161.975 157.375 162.025 157.425

01A 156.050 --11

22A 157.100 23A 157.157.200 157.250 157.300 157.350 157.400
64A 156.225 65A 156.275 66A 156.156.74 156.425 156.475 156.575 156.625 156.675 156.725
13 156.156.156.850 18A 156.900 19A 156.157.000 20A 157.000 21A 157.050
78A 156.925 79A 156.975 80A 157.025 81A 157.075 82A 157.125 83A 157.85 157.225 157.275 84A 157.225 85A 157.275
86A 157.325 87A 157.375 88A 157.425
03A 156.150 05A 156.250 07A 156.350
37A 157.850 61A 156.075 ---63A 156.175

power only.

Receive

only. 23

(2).qxd 01.12.10 11:16 AM Page 24 (1,1)

GENERAL

SPECIFICATIONS AND OPTIONS

I Options

DS-100 (#02) DSC CONTROLLER

: 156.025157.425 MHz

(156.00161.450MHz)*

I Specications

Frequency coverage Transmit Receive
When the DS-100 (#02) is installed, the transceiver conforms to DSC class D for marine digital communications.

156.025162.025 MHz

MB-69 FLUSH MOUNT
For mounting the transceiver to a panel.
(156.00163.425MHz)* * Frequency range that may be subject to licensing conditions.
Mode Channel spacing Current drain (at 13.8 V) Power supply requirement Frequency stability Dimensions
(Projection not included)
: FM (16K0G3E)/DSC (16K0G2B) : 25 kHz : TX high 6.0 A max. Max. audio 1.2 A max. : 13.8 V DC : 1.5 kHz (20C to +60C) : 153(W) 67(H) 141.6(D) mm : 900 g : 25 W and 1 W : Variable reactance phase modulation : 5.0 kHz : Less than 0.25 W

SP-5 EXTERNAL SPEAKER

A large, external speaker for superior audio output.

SP-10 EXTERNAL SPEAKER

A compact, external speaker for easy installation.

Weight

TRANSMITTER
Output power Modulation system Max. frequency deviation Spurious emissions

RECEIVER

Receive system : Double conversion superheterodyne Sensitivity (20 dB SINAD) : Less than 2 dB EMF (typical) Squelch sensitivity : Less than 0 dB EMF Intermodulation rejection ratio : More than 68 dB Spurious response rejection ratio: More than 70 dB Adjacent channel selectivity : More than 70 dB Audio output power : 2 W at 10% distortion with a 4 load
All stated specications are subject to change without notice or obligation.
(2).qxd 01.12.10 11:16 AM Page 25 (1,1)

MB-69 TEMPLATE

Unit: mm

Cut here

(2).qxd 01.12.10 11:16 AM Page 26 (1,1)
(2).qxd 01.12.10 11:16 AM Page 27 (1,1)
DECLARATION OF CONFORMITY

We Icom Inc. Japan

1-1-32, Kamiminami, Hirano-ku Osaka 547-0003, Japan Declare on our sole responsibility that this equipment complies with the essential requirements of the Radio and Telecommunications Terminal Equipment Directive, 1999/5/EC, and that any applicable Essential Test Suite measurements have been performed. Kind of equipment: Type-designation: VHF MARINE TRANSCEIVER

Dsseldorf 31th May 2001

Place and date of issue

Icom (Europe) GmbH

Himmelgeister strae 100 D-40225 Dsseldorf
Authorized representative name
Version (where applicable): This compliances is based on conformity with the following harmonised standards, specifications or documents: i) EN 301 025-1 V1.1.2 (2000-08) ii) EN 301 025-2 V1.1.1 (2000-08) iii) EN 301 025-3 V1.1.1 (2001-05) iv) EN 300 162-2 V1.1.2 (2000-12) v) EN 300 162-3 V1.1.1 (2001-05) vi) EN vii) EN viii) EN 300 698-2 V1.1.1 ( 2000-8) ix)
T. Maebayashi General Manager

Signature

(2).qxd 01.12.10 11:16 AM Page Z (1,1)

Count on us!

< Intended Country of Use >

GER AUT GBR IRL FRA SUI

NED BEL LUX ESP POR

ITA GRE SWE DEN FIN

 

Tags

DV6200 301 V Server V1 00 EX-S770 Versatis 500 GA-6wmmc7 Control Speedlight DCE33 M55-S135 CQ-C5300N Edition DVP5960-37B Fujifilm E500 500 L NAD HTR2 NWZ-E455 040-240 B Security 2010 SE-CA10 HK825 8624 400 -V2936 AWW12580W Meter B LPG ALL-IN-ONE DV-3750S MHC-RG475S Modelo M A-9355 320DF TA-R200 SRT 5010 54AT-15SC 16SC EL-128KPL PS-42E7H DVP320 BK ZBI-3646A CDX-2700 EMT-1 HDC-DX1 Charger KIT SRM5100 10 Satellite A70 AR-M237 SPH-W3300 F7000N-PN 75-FO-152 252 KRF-V6060D Thinkpad 600X NWZ-B103F Maestro Urc-7955 125 S Pajero KDF-E50a10 TC 143 FEB-20E Sv-150S BD-C6800 Netscanev30 Futaba 7CAP Asus R2H CK3100 LCD SU-8055 SA-EN17 RDR-VD60 ZKT621LX Server Fantasy III Digimax V4 21GR1251-32B DTB-21S7 HBM-550 CM-30 Iii-tutorial GT-M7600 XVS1100 08MP08 MW1040WA DB-V40 Es 525 IC-T7A NS-45E S2500HD Review 430EX II CDP-M305 HDR3810 447N SB ZWC85050W CE118KF Futaba 7CHP SUB 25A Confort 2 0 DSC-T90 T AR-121E 151E Aspire-1650

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101