Icom IC-208H, size: 3.2 MB
Icom IC-208H Instruction Manual
Icom IC-208H Service Manual
Here you can find all about Icom IC-208H like manual and other informations. For example: software, price, review, mods.
Icom IC-208H manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Icom IC-208H please write about it to help other people.
[ Report abuse or wrong photo | Share your Icom IC-208H photo ]
User reviews and opinions
|karambos||12:23am on Tuesday, October 19th, 2010|
|Placement of the headset in the ear of the Creative EP630 with coverage from rubber provide a fantastic experience audio in MP3 format.|
|rckcycling||12:31am on Wednesday, October 13th, 2010|
|My first IEM were "Koss Spark Plug" ( 2 pairs ) and I thought they were good, but after trying EP-630 I forgot "Plugs" like a horrible nightmare. These came with my Dell XPS 1530 and I tried them for the first time and really was impressed.|
|pucho||6:04pm on Tuesday, September 7th, 2010|
|Creative EP-830 Noise Isolating Earphones Very disappointed with these earphones, i bought them off the back of very good reviews i had read. Headphones Arrived quickly. Earphones work very well but no good if your lug holes are smaller than the average person.|
|fisco||6:17am on Tuesday, August 10th, 2010|
|The silicone fittings are changeable so you can choose the right size for your ears. Bad thing about that is that they tend to fall off now and then. i used egg saver and got it in 4 days....not that bad as i thought it would be 1. good bass ; 2. crisp sound ; 3.|
|linuxman||10:34am on Friday, August 6th, 2010|
|I must be a compulsive headphone buyer. I have a lot of headphones at home, most inexpensive and not all are being used.|
|youradds||12:48am on Tuesday, August 3rd, 2010|
|Very good....when they work! Bought my 2nd pair of these in February. Great value, and a decent sound...|
|Cluster||10:29pm on Saturday, June 19th, 2010|
|Sound quality??? After reading other review I am extremely surprised at what I am listening to. Small price for big sound For $16.00, what can you say! I was quite pleased with the sound for such a small price. For this great price, not bad So I ordered these on Monday, early morning and after the item was finally shipped.|
|gandroul||4:01am on Thursday, May 13th, 2010|
|Amazing Creative EP-630 In-Ear Noise-Isolating Headphones (Black) I got a pair of these when I ordered my XPS computer system back in 2008.|
|timlitw||2:54am on Monday, April 26th, 2010|
|"Well, after using fm mods i decided that it was time to move on and buy something else. i had 2 choices 1. "This is my 3rd tape adapter for my iPod - first was Monster Cable, then Dynex (?) - which was the worst, and now this Sony one.|
|Atlas33||7:28am on Sunday, April 25th, 2010|
|The only issue that I have found is that the rubber ear buds can compress at times - I simply pull them back out, but it can be anoying at times.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Icom IC-208H VHF/UHF Radio
MiniOperating Guide by W5JCK
[SETLOCK] Set, Lock Switch Press to enter Set mode. Press and hold for 1 sec. to switch the Lock function On or Off. [DIAL] Tuning Dial Turn to select operating frequency, memory channel, setting for Set mode item, or scanning direction. [VOL] Volume Control Turn to adjust audio.
[TONET-SCAN] Tone, Tone Scan Switch Press to select a Tone function. Press and hold for 1 sec. to start the tone scan. [M/CALLPRIO] Memory/Call, Priority Switch Press to select between memory, Call, and Weather Channel modes. Press and hold for 1 sec. to start the Priority Watch operation. [V/MHzSCAN] VFO/MHz Tuning, Scan Switch Press to select between VFO mode and 1 MHz Tuning mode. Press and hold for 1 sec. to start or stop scan. [BAND] Band Switch During VFO op., press to select the operating frequency. During Call Channel op., press to select between call channels 1 or 2. Press and hold for 1 sec. then turn to select operating mode. [S.MWMW] Memory Write Switch Press to select a memory channel for programming. Press and hold for 1 sec. to program a memory channel.
11 [PWR] Power Switch Press and hold for 1 sec. to turn power On or Off. Microphone Connector Connects the HM-133 microphone. [SQL] Squelch Control Turn to adjust squelch level. [MONIDTMF] Monitor, DTMF Press to switch the Monitor function On or Off. Press and hold for 1 sec. to turn DTMF memory encoder On or Off. [LOWDUP] Output Power, Duplex Switch Press to change the power output level. Press and hold for 1 sec. to select between DUP-, DUP+, and Simplex operation. 12
Icom IC208H MiniOperating Guide by W5JCK, September 2007
Page 1 of 6
Using the HM-133 Microphone
You can use the keypad and buttons on the HM-133 microphone to perform many of the common tasks required for operating the radio, including selecting a frequency band and directly entering a frequency.
9 VFO/Lock Switch PTT Switch Up/Down Switches Activity Indicator Keypad Function Indicator 2
Using the / Keys
Select a Frequency Press or to select a frequency (in VFO mode) or memory channel (in Memory mode). Start a Scan Press and hold or for 1 sec. to activate the scan mode. Stop a Scan Press or to cancel the scan. Select a Band Press [BAND] then press or to select band. Press [BAND] again to activate the desired band.
DTMF Select switch Function Switches
10 Band Switch
11 Memory/Call Switch
Select a Frequency Band
Directly Enter a Frequency
Page 2 of 6
Turning the power On or Off
Press and hold [PWR] for 1 sec. to turn the power On or Off.
Selecting a Frequency Band
1. Press [BAND]. 2. Rotate the Dial to select the band. 3. Press [BAND] to activate the desired band. You can select between 2m and 70cm bands for transmission, and 127 MHz, 2m, 220 MHz, 350 MHz, 70cm, 500 MHz, and 900 MHz bands for reception. Alternatively: See Using the HM-133 Microphone section for instructions on using the microphone to select a band.
Activating VFO Mode
Press [V/MHzSCAN] to activate the VFO mode. Alternatively: Press the HM-133 microphone button [VFO/LOCK] to activate VFO mode.
Operating in VFO Mode
If necessary, press [V/MHzSCAN] to activate the VFO mode. To change the frequency using 1 KHz steps, rotate the Dial. To change the frequency using 100 KHz, 1 MHz, or 10 MHz steps: 1. Press [V/MHzSCAN] one or more times to toggle between 100 KHz, 1 MHz, and 10 MHz tuning steps. 2. Rotate the Dial to change the frequency. To start a scan, press and hold [V/MHzSCAN] for 1 second. To stop a scan, press [V/MHzSCAN]. Note: The digit associated with each tuning step (100 KHz, 1 MHz, or 10 MHz) disappears when that step is selected.
Activating Memory Mode
Press [M/CALLPRIO] to activate Memory mode. The indicator icon appears on the LCD display when Memory mode is activated. Alternatively: Press the HM-133 microphone button [MR/CALL] to activate Memory mode.
Page 3 of 6
Operating in Memory Mode
If necessary, press [M/CALLPRIO] to activate Memory mode. To change the Memory channel, rotate [DIAL]. To start a scan, press and hold [V/MHzSCAN] for 1 second. To stop a scan, press [V/MHzSCAN]. Alternatively: See Using the HM-133 Microphone section for instructions on using the microphone / and/or keypad buttons to perform these operations.
Memory Bank Selection
The IC-208H has 10 Memory Banks (A to J), each of which can contain up to 500 Memory channels. To select a Memory channel within a Bank: 1. If necessary, press [M/CALLPRIO] to activate Memory mode. 2. Press [BAND] one or more times to activate the Memory Bank selection. (The Bank initial blinks on the LCD display.) 3. Rotate [DIAL] to display the desired Memory Bank. 4. Press [BAND] to select the Memory Bank. (The Bank initial stops blinking.) 5. Rotate the Dial to select a Memory channel within the bank. To return to regular Memory mode, Press [BAND] twice.
Using the Monitor Function
This function is used to listen to weak signals without disturbing the squelch setting. To activate, press [MONIDTMF] to open the squelch. (The Busy icon blinks on the LCD display`.) To cancel, press [MONIDTMF] again.
Alternatively: Press the HM-133 microphone button [BANKMONI1] to activate or cancel the Monitor function.
Selecting the Call Channel
Call channel is a pre-programmed Memory channel accessed by pressing the Call channel button. 1. Press [M/CALLPRIO] one or more times to activate Call Channel mode. 2. Press [BAND] to select the desired call channel. (In Memory mode, the C1 or C2 icon blinks. In VFO mode, the c icon blinks.) 3. To cancel Call Channel mode: To return to Memory mode, press [M/CALLPRIO] one or more times. To return to VFO mode, press [V/MHzSCAN].
Alternatively: Press and hold the HM-133 microphone button [MRCALL] for 1 sec. to activate the Call Channel mode, then press [BAND] to select the desired call channel in the main Band.To cancel, press [MRCALL] to return to Memory mode, or press [VFO/LOCK] to return to VFO mode.
Page 4 of 6
Operating through a Repeater
Normally, you will operate the IC-208H through repeater frequencies that have been preprogrammed into the radios Memory channels. However, the occasion may arise in which you need to operate through a repeater that has not been pre-programmed. This section instructs you in setting up the IC-208H to operate through a repeater. 1. Activate VFO mode: Press [V/MHzSCAN] to activate the VFO mode. 2. Select the Frequency Band: See Selecting a Frequency Band for instructions. 3. Set the Receive Frequency: See Operating in VFO Mode for instructions. This is the frequency on which your radio receives the repeaters transmissions. (For example, you will receive the Tarrant County R.A.C.E.S. repeater on 146.940 MHz.) 4. If necessary, Set the Repeater Shift:
Note: If the Auto Repeater Function is set to On and the repeater uses a standard repeater shift, this step will not be necessary as the IC-208H will automatically set the shift. To manually set the repeater shift: Press and hold [LOWDUP] for 1 sec., once or twice, to select minus duplex or plus duplex shift. For minus duplex, DUP appears on the LCD screen. The repeaters receive freq. is set lower than its transmit frequency. For plus duplex, DUP appears on the LCD screen. The repeaters receive freq. is set higher than its transmit frequency. If the repeater uses an offset frequency amount other than 0.6 MHz for 2m band or 5 MHz for 70cm band, manually set the offset in Step 5. Example: Set the 146.940 repeater shift to minus duplex DUP. This sets the repeaters receive frequency to 146.340 MHz.
5. If necessary, Set the Repeater Offset Frequency Amount:
Note: This step is only necessary if the repeaters offset frequency is an amount other than 0.6 MHz on the 2m band or 5 MHz on the 70cm band. a. Press [SETLOCK] to activate Set mode. b. If necessary, rotate [DIAL] to select SET. c. Press [SETLOCK] one or more times until DUP and offset frequency appear. d. Rotate [DIAL] to select the offset frequency. e. Press [TONET-SCAN] to set the offset and exit Set mode.
Page 5 of 6
6. Set the Repeater Tone Encoder Type and Tone Frequency:
a. Press [SETLOCK] to activate Set mode. b. If necessary, rotate [DIAL] to select SET. c. Press [SETLOCK] one or more times until T and rT appear. d. Rotate [DIAL] to select the subaudible tone frequency. Example: Set tone frequency to 110.9 for the 146.940 repeater. e. Press [TONET-SCAN] to set the tone frequency and exit Set mode.
You can now operate through the repeater. To ensure you do not lose these settings, you can save this information to a Memory channel.
Programming a Memory Channel
VFO settings, including the set mode contents such as subaudible tone frequency or offset, can be programmed into a memory channel.
1. Press [S.MWMW] to activate memory channel programming mode. The indicator icon appears on the LCD display. 2. Rotate [DIAL] to select a blank Memory channel in which to program the current settings. Be certain you select a blank channel so as to not overwrite any existing channels. 3. Press and hold [S.MWMW] for 1 sec. to program the channel. Three beeps will sound indicating the channel was programmed.
Assigning a Memory Channel to a Memory Bank
Each memory channel and the call channel can be programmed with an alphanumeric name for easy recognition. Names can be a maximum of six characters.
1. Press [M/CALLPRIO] to activate Memory mode, then rotate [DIAL] to select the Memory channel. 2. Press [SETLOCK] to activate Set mode. 3. Press [SETLOCK] several times until BAK is displayed. 4. Rotate [DIAL] to select the desired Memory bank. 5. Press [V/MHzSCAN] to exit Set mode.
Page 6 of 6
!4 !4 CONTROLLER RELEASE LATCH While pushing this latch, slide the controller to the left to remove it.
Push for 1 sec. to start the tone scan. (p. 55) !0 MEMORY/CALLPRIORITY SWITCH [M/CALLPRIO] Push to select and toggle memory, call and weather channel* modes. (pgs. 11, 26, 38, 66) Starts priority watch when pushed for 1 sec. (p. 47) !1 VFO/MHz TUNINGSCAN SWITCH [V/MHzSCAN] Selects and toggles VFO mode and 1 MHz (or 10 MHz for some versions) tuning when pushed. (p. 11) Starts scan when pushed for 1 sec. (p. 41)
Cancels a scan when pushed during scan. *Weather channels are available for USA version only.
I Function display
q w e r t y u
i o !7 !6 !5 q TRANSMIT INDICATOR Appears while transmitting. (p. 17) Blinks while transmitting with the one-touch PTT function. (p. 18) w DUPLEX INDICATORS (p. 20) DUP appears when plus duplex, DUP appears when minus duplex (repeater) operation is selected. !4 !3 !2 !1 !0
e TONE INDICATORS T appears while the subaudible tone encoder is in use. (p. 20) T SQL appears while the tone squelch function is in use. (p. 52) DTCS appears while the DTCS squelch function is in use. (p. 52) S appears with the T SQL or DTCS indicator while the pocket beep function (with CTCSS or DTCS) is in use. (p. 52)
r NARROW MODE INDICATOR (p. 65) Appears when the FM/AM narrow mode is selected. Narrow mode is available with USA version only. t AM INDICATOR (p. 65) Appears when AM mode is selected. y SQUELCH ATTENUATOR INDICATOR (p. 16) Appears when the squelch attenuator function is activated.
The attenuator can be switched OFF in initial set mode. (p. 63)
!2 MEMORY CHANNEL NUMBER INDICATORS Shows the selected memory channel number. (p. 26) Shows the selected bank initial. (p. 35) C appears when the call channel is selected. (p. 38) L appears when the lock function is activated. (p. 14) !3 SKIP INDICATORS (p. 44) ~appears when the displayed memory channel is specied as a skip channel. P ~ appears when the displayed frequency is specied as a program skip frequency. !4 MEMORY INDICATOR (pgs. 11, 26) Appears when memory mode is selected. !5 S/RF INDICATORS Shows the relative signal strength while receiving signals. (p. 15) Shows the output power level while transmitting. (p. 17) !6 OUTPUT POWER INDICATORS LOW appears when low output power; MID appears when middle output power is selected. No indicator appears when high output power is selected. !7 BUSY INDICATOR Appears when a signal is being received or the squelch is open. (p. 15) Blinks while the monitor function is activated. (p. 15)
u AUTO POWER-OFF INDICATOR (p. 62) Appears while the auto power OFF function is in use. i AUDIO MUTE INDICATOR (P. 18) Appears when the audio mute function is activated.
The mute can only be switched ON and OFF from the HM-133 only.
SECONDARY FUNCTION (
Cancels frequency entry. (p. 12) Selects a memory channel for program Cancels the scan or priority watch. ming. (p. 28) (pgs. 41, 47) Advances the memory channel number Exit set mode. (p. 56) when continuously pushed after programming is completed. (p. 28) Enters set mode (p. 56) DTMF memory encoder function OFF. Advances the set mode selection order (p. 50) after entering set mode. (p. 56) Sets the keypad for numeral input. Turns the subaudible tone encoder, pocket After pushing : (p. 12) beep or CTCSS/DTCS tone squelch OFF. Transmits the appropriate Reverses the set mode selection order (pgs. 21, 53) DTMF code. (pgs. 23, 50) after entering set mode. (p. 56) Adjusts the squelch level increments. Mutes the audio. (p. 18) (p. 15) Mute function is released when any operation is performed. Decreases audio output level. (p. 15) Sends a 1750 Hz tone signal for 0.5 sec. (p. 23)
Adjusts the squelch level decrement. Locks the digit keys on the keypad (includ(p. 15) ing the A to D, # and M keys). (p. 14)
I Optional Microphones (HM-118N/TN/TAN)
q PTT SWITCH Push and hold to transmit; release to receive. w UP/DOWN SWITCHES [UP]/[DN] Push either switch to change operating frequency, memory channel, set mode setting, etc. (pgs. 12, 26, 56) Push either switch for 1 sec. to start scanning. (p. 41) e UP/DN LOCK SWITCH Slide to toggle [UP]/[DN] switches function ON and OFF. r KEYPAD (HM-118TN/TAN only) While pushing [PTT], push the desired key to send the DTMF code.
SETTING A FREQUENCY
D VFO and memory modes
The transceiver has 2 basic operating modes: VFO mode and memory mode. Select VFO mode rst to set an operating frequency.
D Turning power ON/OFF
Push [PWR] for 1 sec. to turn power ON and OFF.
D Operating frequency band selection
The IC-208H has 2 m and 70 cm bands for transmission and reception. In addition, extra frequency bands 127, 220, 350, 500 and 900 MHz bands are available for wide-band receiver capability (except Taiwan and Korean version).
Push [V/MHzSCAN] to select VFO mode.
When VFO mode is already selected, the digit below 10 MHz (the digit below 1 MHz or 100 kHz disappear depending on versions) disappear. In this case, push [V/MHzSCAN] again (or twice or 3 times depending on version).
z Push [MR/CALL] to select the memory mode. x Push [Y] or [Z] to select the desired memory channel to be indicated the channel name. c Push [SET B(D-OFF)] to enter set mode. v Push [SET B(D-OFF)] or [ENT C(T-OFF)] until ANM appear.
y Push [V/MHzSCAN] to exit set mode. NOTE: When no memory name is programmed, the stored frequency is displayed.
b Push [Y] or [Z] to set the memory name indication ON and OFF. n Push [CLR A(MW)] to exit set mode.
I Memory clearing
Contents of programmed memories can be cleared (blanked), if desired. q Push [V/MHzSCAN] to select VFO mode. w Push [S.MWMW] momentarily.
r Push [S.MWMW] momentarily, then push [S.MWMW] again for 1 sec.
This operation must be performed within 1.5 sec. 3 beeps sound, then the frequency is cleared. ! indicator and the channel number blink continuously. When clearing the call channel, the current VFO conditions are re-programmed into the call channel automatically.
e Rotate [DIAL] to select the memory channel to be cleared.
t Push [V/MHzSCAN] to return to VFO mode. NOTE: Be careful! the contents of cleared memories CANNOT be recalled.
[EXAMPLE]: Clearing memory channel 20.
Push to select VFO. Push. Rotate for selecting memory channel.
momentarily, then push
again for 1 sec.
Push any switch, except
I Memory bank selection
The IC-208H has a total of 10 banks (A to J). Regular memory channels, 1 to 500, are assigned into the desired bank for easy memory management. q Push [M/CALLPRIO] several times to select memory mode, if desired. w Push [BAND] to select memory bank condition.
Banks initial blinks BANK
z Push [MR/CALL] to select memory mode, if desired. x Push [FUNC] then [MONI 1(BANK)] to select memory bank condition.
Banks initial blinks
c Push [Y]/[Z] to select the desired bank, A to J.
[Y]/[Z] Only programmed memory bank can be selected.
v Push [CLR A(MW)] to set the bank.
Banks initial stops blinking.
b Push [Y]/[Z] to select the desired contents in the bank.
[BAND] Bank initial blinks No channel numbers are displayed for memory bank operation.
e Rotate [DIAL] to select the desired bank, A to J.
Banks that have no programmed contents are skipped.
r Push [BAND] to set the bank.
n To return to regular memory condition, push [FUNC], [MONI 1(BANK)] then push [CLR A(MW)].
t Rotate [DIAL] to select the contents in the bank.
No channel numbers are displayed for memory bank operation.
q Select VFO mode for full/programmed scan with [V/MHzSCAN]; or memory mode for memory scan with [M/CALLPRIO].
Select the desired bank for bank scan.
x Push [SQLY D(MUTE)] or [SQLZ #(16KEY-L)] to set the squelch to the point where noise is just muted. c Push [SCAN 2(T-SCAN)] to start the scan.
Push [Y] or [Z] for 1 sec. also starts the scan.
w Set the squelch to the point where noise is just muted. e Push [V/MHzSCAN] for 1 sec. to start the scan.
To change the scanning direction, rotate [DIAL]. The memory channel readout blinks the scan type as follows:
r Push [SETLOCK] to switch full and programmed scan (P1, P2, P3, P4 and P5), if VFO is selected in step q. t To stop the scan, push [V/MHzSCAN].
During full scan During programmed scan
v Push [SET B(D-OFF)] to switch full and programmed scan (P1, P2, P3, P4 and P5), if VFO is selected in step z. b To stop the scan push [SCAN 2(T-SCAN)] or [CLR A(MW)].
During memory scan
During bank scan
Push [SETLOCK] to select ALL (full) or programmed scan (P1, P2, P3, P4 and P5) in sequence.
Indicates scan edge channels. P1 stands for 1A/1B P1 to P5 are available when they are programmed, and switches with [SETLOCK].
Indicates bank initial.
I Scan edges programming
Scan edges can be programmed in the same manner as memory channels. Scan edges are programmed into scan edges, 1A/1B to 5A/5B, in memory channels. q Set the edge frequency of the desired frequency range in VFO mode: Set the frequency using [DIAL]. Set other data (e.g. repeater settings, etc.) if desired. w Push [S.MWMW].
! indicator and channel number blink.
3 beeps sound and VFO is automatically selected. Scan edge 1B, 2B, 3B, 4B or 5B is automatically selected when continuing to push [S.MWMW] after programming.
t To program a frequency for the other pair of scan edges, 1B, 2B, 3B, 4B or 5B, repeat steps q to r.
If the same frequency is programmed into a pair of scan edges, programmed scan will not function.
e Rotate [DIAL] to select one of scan edge channel, 1A, 2A, 3A, 4A or 5A. [EXAMPLE]: Programming 145.300 MHz into scan edges 1A.
Rotate for setting frequency, etc. Push Rotate
D Programming scan edges via microphone
z Set the desired frequency in VFO mode. Push [VFO/LOCK] to select VFO mode. Set the frequency via the keypad or [Y]/[Z]. x Push [FUNC] then [CLR A(MW)] momentarily. c Push [Y] or [Z] to select scan edge channels, 1A, 2A, 3A, 4A or 5A. v Push [FUNC], then push [CLR A(MW)] for 1 sec. to program.
3 beeps sound and VFO is automatically selected. Memory channel number advances to the next scan edge channel, 1B, 2B, 3B, 4B or 5B when continuing to push [CLR A(MW)] after programming.
b To program a frequency for the other scan edge channels, repeat steps z to v.
[EXAMPLE]: Programming 145.800 MHz into scan edge 1B.
Push Push Push then momentarily
I Skip channel setting [
The memory skip function speeds up scanning by checking only those memory channels not set as skip channels. Set skip channels as follows.
The display shows that memory channel 1 is set as a skip channel. SET B
z Select a memory channel. Select memory mode by pushing [MR/CALL]. Push [Y] or [Z] to select the desired channel to be a skip channel.
Direct memory channel selection is also available.
x Push [SET B(D-OFF)] to enter set mode. c Push [SET B(D-OFF)] or [ENT C(T-OFF)] several times until CHS appears as shown at left. v Push [Y] or [Z] to set or cancel the skip setting.
See item r at left for skip indicator details.
q Select a memory channel: Push [M/CALLPRIO] to select memory mode. Rotate [DIAL] to select the desired channel to be a skip channel. w Push [SETLOCK] to enter set mode. e Push [SETLOCK] or [S.MWMW] several times until CHS appears as shown above. r Rotate [DIAL] to turn the skip function ON or OFF for the selected channel.
~ appears : The channel is skipped during scan. (CHS-ON) P ~ appears : The channel is skipped during scan and the programmed frequency is skipped during VFO scan, such as programmed scan. (CHS-ON) ~ disappears : The channel is scanned during scan. (CHS-OF)
b Push [CLR A(MW)] to exit set mode.
t Push [MONIDTMF] to exit set mode. 44
I Scan resume condition [
The scan resume condition can be selected as timer or pause scan. The selected resume condition is also used for priority watch. (p. 47)
The display shows that the scan will resume 15 sec. after it stops.
z Push [BAND] to select the desired band.
SET x Push [SET B(D-OFF)] to enter set mode. B
c Push [SET B(D-OFF)] or [ENT C(T-OFF)] several times until SCT or SCP appears as shown at left. v Push [Y] or [Z] to select the scan resume condition.
The transceiver checks the memory or call channel every 5 sec. The watch resumes according to the selected scan resume condition. (p. 45) While the watch is pausing, pushing [M/CALLPRIO] resumes the watch manually. PRIO 3
z Select VFO mode; then, set the desired frequency. x Set the watching channel(s). For memory channel watch: Push [MR/CALL] then [Y] or [Z] to select the desired memory channel. For memory scan watch: Push [MR/CALL], then push [SCAN 2] to start the memory scan. For call channel watch: Push [MR/CALL] for 1 sec. then push [BAND] to select the call channel. c Push [PRIO 3(PTT-M)] to start the watch.
The transceiver checks the memory or call channel every 5 sec. The watch resumes according to the selected scan resume condition. (p. 45) To resume the watch manually when paused, push [PRIO 3(PTT-M)] or [CLR A(MW)].
r Push [M/CALLPRIO] for 1 sec. to stop the watch.
v To stop the watch, push [CLR A(MW)] once (or twice while watch is paused).
DTMF MEMORY ENCODER
I Programming a DTMF code
DTMF tones are used for autopatching, controlling other equipment, etc. The transceiver has 16 DTMF memory channels (D0DF) for storage of often-used DTMF codes of up to 24 digits. q Push [MONIDTMF] for 1 sec. to turn the DTMF encoder ON.
d appears in place of 100 MHz digit.
r Push [SETLOCK].
The rst digit blinks.
t Rotate [DIAL] to select the desired code. y Push [SETLOCK] to select the next digit.
Pushing [S.MWMW] moves the cursor backward.
u Repeat the steps t and y to set the desired DTMF tone sequence.
The S/RF indicator shows the digit group. The indication increases every 6 digits.
w Push [SETLOCK] to enter the DTMF memory programming condition.
The DTMF memory channel indication blinks.
i Push [MONIDTMF] to exit DTMF memory programming condition.
Return to the previous indication as in step q.
e Rotate [DIAL] to select the desired DTMF memory channel.
[EXAMPLE]: Programming 5428AB453 into DTMF memory channel D4.
Push for 1 sec. Push Rotate
Repeat the previous step until the desired code is entered.
D Programming a DTMF code via microphone
z Push [FUNC] then [LOW 6(DTMF)] to turn the DTMF encoder ON.
b Push [VFO/LOCK] to exit the programming condition.
The [CLR A(MW)] key cannot be used to exit. If pushed, code A is input. Reprogram in such a case.
x Push [SET B(D-OFF)] to enter the DTMF memory programming condition. c Push [Y] or [Z] to select the desired DTMF memory channel. v Push the desired digit keys.
When the first digit is input, previous memory contents are cleared automatically. M E stands for M and F stands for #. Push [Y]/[Z] and repeat this step if you make a mistake. The S/RF indicator shows the digit group. The indication increases every 6 digits.
Push then. Push Push
I Transmitting a DTMF code
D Automatic transmission (DTMF memory)
qPush [MONIDTMF] for 1 sec. to turn the DTMF memory encoder ON.
D Transmitting a DTMF memory directly
z Push [FUNC] then [LOW 6(DTMF)] to turn the DTMF memory encoder ON.
wPush [SETLOCK] to enter DTMF memory programming condition. eRotate [DIAL] to select the desired DTMF memory channel. r Push [PTT] to transmit the selected DTMF memory content. tPush [MONIDTMF] for 1 sec. to cancel the DTMF encoder.
When the DTMF encoder is turned ON continuously, each push of the PTT transmits the previously selected DTMF code.
x Push [DTMF-S] to turn the DTMF memory direct selection ON.
The function indicator (microphone) lights green.
c Push the desired DTMF channel.
0 to 9 and A to D are available for DTMF memory channels. The selected DTMF code is automatically transmitted without pushing PTT. NOTE: When no DTMF code programmed channel number is pushed, it transmits the relative DTMF code as the manual transmission described in the next page.
x Push [SET B(D-OFF)] to enter the DTMF memory programming condition. c Push [Y] or [Z] to select the desired channel. v Push [PTT] to transmit the selected memory.
Exit the programming condition automatically. Each push of [PTT] transmits the DTMF code.
v Push [DTMF-S] again to deactivate the DTMF memory direct selection. b Push [FUNC] then [SET B(D-OFF)] to cancel the DTMF memory encoder.
b Push [FUNC] then [SET B(D-OFF)] to cancel the DTMF memory encoder.
D Manual transmission
z Deactivate the DTMF memory encoder by DTMF-S pushing [FUNC] then [SET B(D-OFF)]. x Push [DTMF-S] to turn the DTMF direct selection ON.
I DTMF speed
The rate at which DTMF memories send individual DTMF characters can be set to accommodate operating needs.
The display shows the fastest DTMF speed is selected.
differ depending on operating frequency band and versions)
Transmit : normal Receive : normal (default) Transmit : normal Receive : reverse
OTHER FUNCTIONS D Memory name setting
Sets memory name setting from ON (appear) and OFF (not appear; default) for memory name appearance. This item appears when set mode is accessed from memory mode only.
D Scan resume timer
Selects scan resume timer from SCT-15 (default), SCT-10, SCT-5 and SCP-2. SCT-15/10/5 : Scan pauses for 15/10/5 sec., then resumes. SCP-2 : Pause on a signal until signal disappears, then resumes 2 sec. after the signal disappears.
D Memory bank setting
Sets the desired memory bank (A to J and OFF) to assign the regular memory channels. This item appears when set mode is accessed from memory mode only.
D Channel skip setting
Sets channel skip setting from ON and OFF for memory skip scan operation. This item appears when set mode is accessed from memory mode only.
~ or P ~ appears when set to ON.
OTHER FUNCTIONS D Program scan skip setting
Sets the program scan skip setting from ON and OFF for VFO scan operation, such as programmed scan. This item appears when set mode is accessed from VFO mode only.
D Memory bank link function
Sets the memory bank link function ON and OFF (default). The link function provides continuous banks scan, that scans all contents in the selected banks during bank scan. This item appears when set mode is accessed from memory mode only.
D Weather alert function
U.S.A. version only
Turns weather alert function ON and OFF.
Bank link setting q Rotate [DIAL] to select the memory bank link function ON. w Push [SETLOCK] or [S.MWMW] to select the desired bank to be linked.
BLA: Bank A, BLB: Bank B, BLC: Bank C, BLD: Bank D, BLE: Bank E, BLF: Bank F, BLG: Bank G, BLH: Bank H, BLI: Bank I, BLJ: Bank J
e Rotate [DIAL] to select ON to linking the bank. r Repeat steps w and e to set the link condition.
I Initial set mode
The initial set mode is accessed at power ON and allows you to set seldom-changed settings. In this way, you can customize transceiver operations to suit your preference and operating style. Initial set mode items
Key-touch beep Time-out timer
D Entering initial set mode
q While pushing [SETLOCK], push [PWR] for 1 sec. to enter initial set mode. w Push [SETLOCK] or [S.MWMW] to select the desired item. e Rotate [DIAL] to select the condition or value. r Push [PWR] momentarily to exit initial set mode.
Auto power off
: Push DTMF speed : Push
(front panel); or (front panel); or
Clearing an assignment q Turn the power OFF. w While pushing the desired [UP] or [DN] key on the microphone, turn the power ON. 67
I Partial reset
I All reset
If you want to initialize the operating conditions (VFO frequency, VFO settings, set mode contents) without clearing the memory contents. While pushing [V/MHzSCAN] and [SETLOCK], push [PWR] for 1 sec. to partially reset.
The function display may occasionally display erroneous information (e.g. when first applying power). This may be caused externally by static electricity or by other factors. If this problem occurs, turn power OFF. After waiting a few seconds, turn power ON again. If the problem persists, perform the following procedure.
Partial resetting is also available. See left for details.
Resetting the transceiver CLEARS all memory information and initializes all values in the transceiver.
While pushing [S.MWMW] and [SETLOCK], push [PWR] for 1 sec. to reset the CPU.
I Data cloning
POWER ON w While pushing [M/CALLPRIO], turn power ON to enter cloning mode (master transceiver only power on only for sub-transceiver).
CLONE appears and the transceivers enter the clone standby condition.
Cloning allows you to quickly and easily transfer the programmed contents from one transceiver to another; or data from a personal computer to a transceiver using the optional CS-208 CLONING SOFTWARE.
D Cloning between transceivers
q Connect the OPC-474 cloning cable to [SP] jack of the master and sub-transceivers.
The master transceiver is used to send data to the sub-transceiver. [M/CALLPRIO] [PWR] While pushing [M/CALLPRIO], turn power ON.
e Push [SETLOCK] on the master transceiver.
To [SP] CL OUT appears in the master transceivers display and the S/RF indicators show that data is being transferred to the subtransceiver. CL IN appears automatically in the sub-transceivers display and the S/RF indicators show that data is being received from the master transceiver.
Pushing [SETLOCK] start cloning.
r When cloning is nished, turn power OFF, then ON to exit cloning mode. 69
OTHER FUNCTIONS D Cloning using a personal computer
Data can be cloned to and from a personal computer (Microsoft Windows 98/2000/Me/XP) using the optional CS-208 CLONING SOFTWARE and the optional cloning cable OPC-478U (USB type) or OPC-478 (RS-232C type). Consult the CS-208 CLONING SOFTWARE HELP le for details.
D Cloning error
NOTE: DO NOT push any key on the sub-transceiver during cloning. This will cause a cloning error. When the display as below appears, a cloning error has occurred.
In such a case, both transceivers automatically return to the clone standby condition and cloning must be repeated.
OTHER FUNCTIONS D 1200 bps packet operation
q Connect the transceiver and a TNC as illustrated below.
TNC side q DATA IN w GND e PTT P y P SQL RX AUDIO PTT SQL TX AUDIO GND
I Packet operation
D Data speed
For packet operation, the transceiver can be set to one of two data speeds: 1200 bps or 9600 bps. q While pushing [SETLOCK], push [PWR] for 1 sec. to enter initial set mode. w Push [SETLOCK] or [S.MWMW] to select the BPS item. e Rotate [DIAL] to select the desired data speed.
t AF OUT
r Push [PWR] to exit initial set mode. For 1200 bps operation Disconnect the microphone plug from the microphone connector during data transmission, otherwise the data signal and voice signal are simultaneously transmitted. For 9600 bps operation When the transceiver is set for 9600 bps data transmission in set mode, the microphone signal is automatically cut. Therefore, it is not necessary to disconnect the microphone plug from the connector in this case. When pushing [PTT] during data transmission, data transmission is interrupted and voice signals have priority. 71
w Set the TNC for transmit. e Set transmit delay on the TNC. r Adjust the TNC frequency deviation if necessary. When using a deviation meter: Adjust the output of the TNC so that frequency deviation is in the range 3 to 4 kHz. When NOT using a deviation meter: A receiver or transceiver is needed to monitor the transmissioncompare the received audio output level when receiving a TNC modulated signal with high level voice signals using the microphone. Then adjust the TNC modulated signal to a lower level than the voice modulated signal.
Read the instructions supplied with your TNC carefully before attempting packet operation with the transceiver. Pin t AF OUT is for 1200 bps operation only. This pin cannot be used for 9600 bps operation. Over modulation may degrade signal quality. If you nd that many transmissions are failing, re-adjust the modulation level.
D 9600 bps high speed packet operation
The transceiver supports 2 modes of 9600 bps packet operation: G3RUH and GMSK. q Connect the transceiver and a TNC as illustrated below.
TNC side q DATA IN w GND e PTT P r DATA OUT TX AUDIO GND
When using the PTT P terminal for packet operation, no voice signals are transmitted from the microphone. When pushing [PTT] during data transmission, data transmission is interrupted and the voice signal takes priority. Read the instructions supplied with your TNC carefully before attempting packet operation with the transceiver. Pin r DATA OUT is for 9600 bps operation only. This pin cannot be used for 1200 bps operation.
y P SQL
RX AUDIO PTT SQL
w G3RUH mode can handle 16 kinds of modulated wave forms in order to maintain a communication link. e Set transmit delay on the TNC. r Adjust the TNC frequency deviation if necessary (see page at right).
OTHER FUNCTIONS D Adjusting the transmit signal output from the TNC
When setting data transmission speed to 9600 bps, the data signal coming from the TNC is applied exclusively to the internal limiter circuitry to automatically maintain band width. NEVER apply data levels from the TNC of over the acceptable level below, otherwise the transceiver will not be able to maintain the band width and may possibly interfere with other stations. 1. When using a level meter or synchroscope, adjust the TX audio output level (DATA IN level) from the TNC as follows.
2 Vp-p (1 Vrms) 1 Vp-p3 Vp-p (0.51.5 Vrms) : recommended level : acceptable level
2. When NOT using a measuring device. q Connect the transceiver to a TNC. w Enter a test mode (CAL, etc.) on the TNC, then transmit some test data. e When the transceiver fails to transmit the test data or transmits sporadically (TX indicator doesnt appear or ashes): - Decrease the TNC output level until the transmit indicator lights continuously. When transmission is not successful even though the TX indicator lights continuously: - Increase the TNC output level. 74
If your transceiver seems to be malfunctioning, please check the following points before sending it to a service center. POSSIBLE CAUSE
Power connector has a poor contact. Polarity of the power connection is reversed. Blown fuse.
Does not turn on.
Check the connector pins. Re-connect the power cable observing the proper pgs. V, polarity. Replace the fuse if damaged. 76 Check the cause, then replace the fuse. p. 76 Rotate [VOL] clockwise. Push any switch or key to deactivate it. Set the squelch level to the threshold. Turn the appropriate function OFF. p. 15 p. 21 p. 15 pgs. 5254
No sound comes from the Volume is too low. The audio mute function is activated. speaker. Squelch is set too high. A selective call or squelch function is activated such as pocket beep or tone squelch.
Sensitivity is low and only Antenna feedline or the antenna connector has a Check, and if necessary, replace the feedline or sol- p. VI der the antenna connector again. strong signals are audible. poor contact or is short circuited. Squelch attenuator function is activated. Set [SQL] between 1012 oclock position. p. 16 No contact possible with The other station is using tone squelch. The transceiver is set to duplex. another station. Turn the tone squelch function ON. Set to simplex. p. 54 p. 23 p. 24 p. 22
Repeater cannot be ac- Wrong offset frequency is programmed. Correct the offset frequency. Wrong subaudible tone frequency is programmed. Correct the subaudible tone frequency. cessed. Frequency cannot be set.
Tx Tx/Rx Tx/Rx
: Less than 60 dB : 8-pin modular (600 )
Receive system : Double-conversion superheterodyne Intermediate frequencies : 1st: 46.05 MHz, 2nd: 450 kHz Sensitivity (FM: at 12 dB SINAD/AM: at 10 dB S/N): 118.000173.995 MHz 0.18 V/0.45 V 230.000299.995 MHz 0.32 V/0.79 V 300.000499.995 MHz 0.22 V/0.63 V 500.000549.995 MHz 0.32 V/Not specied 810.000999.990 MHz 0.45 V/Not specied Squelch sensitivity (threshold) : Less than 0.13 V Selectivity : Wide More than 12 kHz/6 dB Less than 30 kHz/60 dB Narrow More than 6 kHz/6 dB Less than 20 kHz/60 dB Spurious and image rejection : More than 60 dB AF output power (at 13.8 V DC) : More than 2.0 W at 10% distortion with an
*1Guaranteed: 144148 MHz range only.; *2Guaranteed: 440450 MHz range for the USA, 430440 MHz for the General version; *3824.005 to 848.995 and 869.005 to 893.995 MHz ranges are inhibited for USA version and not guaranteed.
Type of emission Number of memory channels Frequency resolution
: FM, AM (Receive only) : 512 (incl. 10 scan edges and 2 calls) : 5, 10, 12.5, 15, 20, 25, 30, 50, 100, 200 kHz Operating temperature range : 10C to +60C; +14F to +140F Frequency stability : 10 ppm (10C to +60C) Power supply requirement : 13.8 V DC 15% Current drain (at 13.8 V DC: approx.): Transmit at 55 W 12 A Receive standby 0.8 A max. audio 1.0 A Antenna connector : SO-239 (50 ) Dimensions (proj. not included) : 141(W) 40(H) 185.4(D) mm 5916(W)1916(H)7516(D) in Weight (approx.) : 1.2 kg; 2 lb 10 oz
Ext. speaker connectors
: 3-conductor 3.5 (d) mm (18)/8
All stated specications are subject to change without notice or obligation.
HM-133 REMOTE-CONTROL MICROPHONE
Wired remote control microphone with key backlight. Same as that supplied with the transceiver.
OPC-441 SPEAKER EXTENSION CABLE
5.0 m (16.4 ft)
SP-7/SP-10 EXTERNAL SPEAKERS
SP-7: For base station use. Cable length: 1.0 m; 3.3 ft SP-10: For all-round mobile operation. Cable length: 1.5 m; 4.9 ft
Supralys N81 8GB Msa1000 943SN 7950 GT Sabt228 M-830V IG-A100 VP-DX205 Kxtg6411PD Experience S-M37 HR7768 13 4 Li-2 Fishfinder 515 IRP-6- SCC-C4203AP C21F65 Basic CDX-L650X Kenox S760 DE4944 EJ-PC50 KIP 3100 Elna 2800 Canon A-1 MZ-EP11 Toolbox 3 XR-P270C M1921A Dslr-A200K PC5010 CLP-2001 VSX-D859TX Alive SC 1402 HF-35W MDR-NC6 DEH-P80RS SSC1000 SRW224 CPC925 Light 42LB1DB Shredder Projector Digidice SU-A800D WF-T1272TP AV610C2 XV-S302 Flash SGH-X500 System Basic F03 CPL TX-32LMD70F MV700 HDR-TG3E 200 VOX TS-H552D HK-700 DVP-NS400D 32s-L EZW-RT10 KDL32S4000 Gz-mg27 1100-1998 Elph 2 Flexbody Type WHE WF-T552 FAV40660 Review 5 1 Cube 2011 LCX-104C YST-SW800 SC-HD560 MK77MII RV-NB10B Nikon F80S A8N-vm CSM HK634200XB Destiny GR-B207EC GC3320 GFA-545II CDA-9831 HD MR 98128 EZ-guide 500 Mods DVD-RV40 RL40egps 1010 RS FG-20 KH 6515 Photo Thinkpad X41 Software Chrono 300 PDC 310 Price
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101