IC-2GXAT Specifications This information is taken directly off of the ICOM IC-2GXAT brochure.
General Frequency Coverage: 144-148 MHz Usable Temperature Range: -10C to +60C; +14F to +140F Tuning steps: 5, 10, 12.5, 15, 20, 25, 30 or 50 kHz Dial select steps: 100 kHz, 1 MHz Number of memory channels: 43 (40 regular, 1 call channel, 2 scan edge channels) Frequency stability: 15 ppm (0C to +60C; +32F to +144F) Current Drain (at 13.5 V, typical): o o Transmit (high): 2.0 A; Transmit (low): 0.9 A Receive (rated audio output): 250 mA; Receive (power saved): 35 mA (average)
External DC power supply: 6 to 16 V DC (negative ground) Dimensions (with BP-160): 57(W) x 125(H) x 35(D) mm, 2.2(W) x 4.9(H) x 1.4(D) in (projections not included) Weight: 365 g; 12.9 oz. (with BP-160)
Transmitter Output power: o o o High (13.5 V DC): 7 W High (7.2 V DC): 2.5 W Low (7.5 - 13.5 V DC): 1 W
Modulation system: Variable reactance frequency modulation Spurious emissions: Less than -60 dB Maximum frequency deviation: 5.0 kHz Microphone impedance: 1000 ohms
Receiver Sensitivity (for 12 dB SINAD): Less than 0.18 V Squelch sensitivity (at threshold): Less than 0.16 V Spurious and image rejection: More than 60 dB Audio output power: More than 350 mW (10% distortion with an 8 ohm load) Audio output impedance: 8 ohms
Function Availability Keypad type: built-in subaudible tone encoder; built-in pocket beep, tone squelch, tone scan; built-in DTMF memory, redial; optional pager, code squelch (UT-49) Non-keypad type: built-in subaudible tone encoder
IC-2GXAT Options Battery Packs and Battery Cases: BP-130A BATTERY CASE: R6 (AA) batteries x 6 (height = 50.0mm; 2.0 in) BP-157A BATTERY PACK: 7.2 V, 900 mAh. Height = 50.0mm; 2.0 in. Charging time = 1 h (BC-79 + AD-28); 15 h (BC-105A/E/D/V, CP-13, OPC288) BP-160 BATTERY PACK: 7.2 V, 700 mAh. Height = 50.0mm; 2.0 in Charging time = 1 h (BC-79 + AD-28); 15 (BC-105A/E/D/V, CP-13, OPC-288) BP-174 BATTERY PACK: 7.2 V, 900 mAh. Height = 78.2mm; 3.1 in. Charging time = 1 h 30 m (BC-79 + AD-28); 20 h* (BC-105A/E/D/V, CP-13, OPC-288) *The optional AD-25 is required.
Chargers: AD-25 BATTERY CHARGER ADAPTER: Allows you to charge BP-174, BP-157A or BP-160 separately from the transceiver using the BC-77A/E/D/V, CP-13 or OPC-288 BC-105A/E/D/V WALL CHARGER: Regularly charges BP-157A or BP-160 through the transceiver. BC-79 + AD-28 DESKTOP CHARGER and BATTERY PACK ADAPTER: Rapidly charges battery packs BP-174 BP-157A or BP-160 Both AC and DC can be
used to power the charger. Cables: CP-13/L CIGARETTE LIGHTER CABLE WITH NOISE FILTER: Allows you to operate the transceiver through a 12 V cigarette lighter socket. Also charges BP-130A (with Ni-Cd batteries), BP-157A or BP-160 through the transceiver. OPC-288/L DC POWER CABLE: For operating the transceiver with 6-16 V DC; also charges BP-130A (with NiCd batteries), BP-157A or BP-160 with 13.8 V through the transceiver.
Microphones and Headset: HS-51 HEADSET: Lightweight headset allows you hands-free operation. Includes VOX, PTT, "one-touch PTT" (TOT). HM-46 SPEAKER-MICROPHONE: Compact and lightweight. Equipped with an earphone jack. HM-54 SPEAKER-MICROPHONE: Durable, full-sized. HM-55 DTMF SPEAKER-MICROPHONE: Combination speaker and microphone with a DTMF keypad.
Carrying Cases: LC-116 CARRYING CASE: Keypad type with BP-130A/157A/160 LC-117 CARRYING CASE: Keypad type with BP-174 LC-118 CARRYING CASE: Non-keypad type with BP-130A/157A/160 LC-119 CARRYING CASE: Non-keypad type with BP-174
Internal Units: UT-49 DTMF DECODER UNIT: For the keypad type only. Provides pager and code squelch functions. UT-86 TONE SQUELCH UNIT: For the non-keypad type only. Provides programmable tone encoder, tone squelch, pocket beep and tone scan functions.
Others: MB-30 MOBILE MOUNTING BRACKET: For mounting the transceiver on the inside door panel of a vehicle or on a wall. SP-13 EARPHONE: Provides clear audio in noisy environments.