ICOM IC-725 Transceiver.
http://ve3cnu.blogspot.com Demonstration of the ICOM IC-725 Ham Radio. I have since sold this radio to a ham who is going to ...
ICOM 726 ham radio on 20 meters using dipole.
... BUXCOMM catalog numbers are shown in parenthesis ( ) and BOLD print, to the "Right" of each transceiver make/model.
Alinco DX-77T ALINCO ALM-203/T ALR-22HT ALR-22T ALR-24T ...
KB2LJJ Radio Mods Database
Radio Mods Database and Manuals
EXPANDED RF No 50 Mhz expansion 1- Remove power and antenna. 2- Remove top and bottom covers. 3- Locate PLL board and cut diode D - Reassemble the radio. 5- Reconnect power. 6- Reset the microprocessor. ( Hold [ FUNCTION ] & [ MW ] and turn power ON
IC-726 Icom IC-726 ! Radio Model Number for display within Log-EQF 1.0 ! Update rate in seconds - 0 is fast, while 10 is slow!! Acknowledge command, if required (leave blank if not) 6 ! Bytes to receive from radio as ECHO or OK block ! Pacing or Initialize command, if required H ! Hexadecimal (H) or String (S) instruction data type F ! Commands sent to radio Forward (F) or Reverse (R) order
-------------- FREQUENCY READ ------------------------FEFE30E003FD ! Command to receive operating from radio 11 Number of bytes expected after FREQ command 6 Starting byte position for value 5 in R Frequency decoded Forward (F) or Reverse (R) order B BCD ...