Reviews & Opinions
Independent and trusted. Read before buy Icom IC-751!

Icom IC-751

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Icom IC-751, size: 7.0 MB
Related manuals
Icom IC-751A
Icom IC-751A Service Manual

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Icom IC-751About Icom IC-751
Here you can find all about Icom IC-751 like manual and other informations. For example: service manual.

Icom IC-751 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Icom IC-751 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Icom IC-751 photo ]

Video review

IW3FZQ/B on ICOM IC 751A

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 8. Page 1 of 1. Average Rating:
ms159 9:08pm on Thursday, October 28th, 2010 
Heralded by the headphone enthusiast community as the KSC75 of ear buds. Very good....when they work! Bought my 2nd pair of these in February. Great value, and a decent sound... Creative EP-830 Noise Isolating Earphones Very disappointed with these earphones, i bought them off the back of very good reviews i had read.
fuzzylinux 2:52am on Tuesday, August 17th, 2010 
My first IEM were "Koss Spark Plug" ( 2 pairs ) and I thought they were good, but after trying EP-630 I forgot "Plugs" like a horrible nightmare. These came with my Dell XPS 1530 and I tried them for the first time and really was impressed.
minibubba 7:51pm on Thursday, August 12th, 2010 
The silicone fittings are changeable so you can choose the right size for your ears. Bad thing about that is that they tend to fall off now and then. i used egg saver and got it in 4 days....not that bad as i thought it would be 1. good bass ; 2. crisp sound ; 3.
vkthor 2:19pm on Monday, July 5th, 2010 
Hello Bargain Hunters! lightweight, great sound, wide range, comfy none Placement of the headset in the ear of the Creative EP630 with coverage from rubber provide a fantastic experience audio in MP3 format.
synt 5:57am on Tuesday, June 29th, 2010 
Sound quality??? After reading other review I am extremely surprised at what I am listening to. Small price for big sound For $16.00, what can you say! I was quite pleased with the sound for such a small price. For this great price, not bad So I ordered these on Monday, early morning and after the item was finally shipped.
poco153 1:47pm on Sunday, June 20th, 2010 
Amazing Creative EP-630 In-Ear Noise-Isolating Headphones (Black) I got a pair of these when I ordered my XPS computer system back in 2008.
vladik7b 1:15am on Sunday, May 30th, 2010 
The only issue that I have found is that the rubber ear buds can compress at times - I simply pull them back out, but it can be anoying at times.
gmichel 5:34pm on Friday, April 2nd, 2010 
I use this in my 1998 car with a tape deck to connect my ipod. I find the fm transmitters annoying, and unreliable. This is much simpler. It was fast fun and easy. Stuck the cassette in plug in my MP3 player and listen to good quality music with no static. Easy Setup","Good Quality".

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

PIEXX ICOMPROM IC-751 / IC-751A RAM / PROM Memory Board
If you have a Icom IC-751 or IC-751A transceiver you probably know that when the internal battery gets weak the transceiver stops working! PIEXX has corrected this problem with the new ICOMPROM Ram replacement board. The ICOMPROM board is a new, plug compatible, memory module that keeps the important setup information in an onboard non-volatile PROM device while employing a battery backed RAM for saving the memory channel data. With the PIEXX ICOMPROM board you will never need to worry about your transceiver going dead from a low battery again!
Installation in IC-751 / IC-751A
1. Record any important memory information that you want to retain from your old memory module. Since you are replacing the transceivers RAM, this information will be lost when the new board is installed. 2. Disconnect the power cord from your transceiver!! 3. Remove the bottom cover of the transceiver. 4. Locate the old Icom RAM board, it is ~ 2 inch square board with the coin cell mounted on it. 5. The old ram board is held in place with a small Phillips screw in one corner of the board. Remove this screw and unplug the old RAM board. 6. Carefully align the new board with the connection pins protruding from the Icom logic board. There are 2 connectors which need to line up, a 12 pin and an 8 pin. Be careful to be certain that all of the pins are aligned with the mating receptacle on the PIEXX ICOMPROM board and then press the board down onto the pins.
Figure 1. PIEXX ICOMPROM board Installed in the IC-751 Xcvr
7. Replace the bottom cover on the radio.
Checkout in IC-751/IC-751A
When you first power on the transceiver, the display may read an unusual frequency like 666.667.8. This is normal after the initial powering up of the system. You must initialize the RAM settings as follows: 1. Set the HAM / GEN purpose function to the HAM mode as indicated by the red GENE message in the bottom left corner of the display being EXTINGUISHED. That is, you shouldnt see the GENE message. 2. Select a band by pressing the Band button and rotating the tuning knob. 3. Select a mode, USB, AM, LSB, your choice. 4. Set the VFO B info to that of VFO A by pressing the A=B button. 5. Preset the 32 memory channels in the normal fashion. If you havent set a particular memory channels data, but try to recall it, the display may show an improper frequency or mode.

Installation in R-71A

1. Record any important memory information that you want to retain from your old memory module. Since you are replacing the transceivers RAM, this information will be lost when the new board is installed. 2. Disconnect the power cord from your receiver!! 3. Remove the bottom cover of the receiver. 4. Remove the mounting plate covering the Logic board, there are four screws securing it. 5. Locate the old Icom RAM board, it is ~ 2 inch square board with the coin cell mounted on it. 6. The old ram board is held in place with a small Phillips screw in one corner of the board. Remove this screw and unplug the old RAM board. 7. You can increase the clearance between the ICOMPROM board and the mounting plate, removed in step 3, by trimming the logic boards RAM connector pins (the 8 and the 12 pin connectors) by about 1/8. This modification isnt 100% necessary, but it is a good idea. 8. Carefully align the new board with the connection pins protruding from the Icom logic board. There are 2 connectors which need to line up, a 12 pin and an 8 pin. Be careful to be certain that all of the pins are aligned with the mating receptacle on the PIEXX ICOMPROM board and then press the board down onto the pins. 9. The Logic board cover plate has an insulating material glued to its bottom. Make sure that the insulating material is in good condition, and replace it if not. This insulation prevents the battery on the IcomPROM board from shorting to the cover plate. 10. Replace the Logic board cover plate and the bottom cover on the radio.

Checkout in R71A

1. When you first power on the receiver, the display may read an unusual frequency like 666.667.8. This is normal after the initial powering up of the system. You must initialize the RAM settings as follows:

2. 3. 4. 5. 6.

Enter a valid frequency with the numeric pad and press the ENT key. Select a mode, USB, AM, LSB, your choice. Set the VFO B info to that of VFO A by pressing the A=B button. Save this frequency data to memory by pressing the WRITE key. Preset the 32 memory channels in the normal fashion. If you havent set a
particular memory channels data, but try to recall it, the display may show an improper frequency or mode.
Figure 2. PIEXX ICOMPROM board Installed in the R71A Receiver

Jumpers

Unless otherwise noted, the ICOMPROM board is shipped with the jumpers set for the IC-751 / IC-751A transceiver. JP1 OUT IN OUT IN OUT IN JP2 OUT OUT IN IN OUT OUT JP3 OUT OUT OUT OUT IN IN JP4 OUT OUT OUT OUT OUT OUT Radio R71 IC-745 IC-751/IC-751A IC-271A IC-471A IC-1271A

 

Tags

T200M C905C 8VM533M-RZ 4100MFP TU-80 Controller Eheim 2217 VGN-FW21ER Gpsmap 76 Command Unit RMS600 KX-T7633B 410-M5 Compressor WM3988HWA Ow 5000 G41M-gs3 Polyglass CG1410 DCR-HC17E ESF 6236 ITD71 MPH FE-270 MT-9960 HT-TX35H EOS 20DA DHR-8105S WV-CS854A HK503 RL39wbns Dock 6000 LSN364H-3 Spirit M BMW 335D ADR3006 9-3 2000 Samsung NV7 DV-SP800 DB355MP Stick Activ Life VX-2100 Pilot DX SD4581 SA-HT800V Recorder 97 M Z5927C DVP-SR101p B FX600 Elph LT Gwhd6507R Vivicam 3735 DC-600UW DCR-IP210 FVS318V3 PEG-NX60 Iw G Yamaha P90 RCX400 V4 5 Suunto S6 Glide IC-M32 HD2200 KD-SH77R Hzle80 Strip ET-1001 P4BGL-MX TCM-453V KX-FHD331 3000-601 Appleworks 6 4000DS EXP7900 XL-R5000 Changers PRO ID-800H Pilot 5000M Service Manual HP-102E LP2252F Tools P13F LD-F7920ST Rev 1 VP-D371I MM-ZB7 MHC-VX55 HQ7320 17 Photo WS9620 VC-M311GM Aztek 2004 ZA 2-5I A8N-SLI CX-32II TDM-BT1 LE32A336j1D Reference 610

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101