Count on us!

INSTRUCTION MANUAL
VHF TRANSCEIVER UHF TRANSCEIVER

iF3GT/GS iF4GT/GS

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC-F3/4GS series

A-5621D-1EX-r Printed in Japan 1999 Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan

FOREWORD

Thank you for purchasing the IC-F3GT/GS, IC-F4GT/GS FM transceiver. READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUALThis instruction manual contains important operating instructions for the transceiver.

TABLE OF CONTENTS

FOREWORD.i IMPORTANT.i TABLE OF CONTENTS.ii 1 PANEL DESCRIPTION.13 Switches, controls, keys and connectors.12 Function display.ACCESSORIES.BATTERY PACKS.510 Battery pack replacement.5 Battery cautions.6 Battery charging.7-8 Charging NOTE.9 Battery case (Option).PROGRAMMABLE FUNCTIONS.11-15 Receiving and transmitting.CONVENTIONAL OPERATION.16-18 Call procedure.17 Tx code channel selection.18 Manual 5-tone codes.18 Transmitting notes.SMARTRUNK IITM OPERATION.19-21 Basic operation.OTHER FUNCTIONS.22 DTMF pager/Code squelch.MAINTENANCE.23 Optional UT-105/UT-108/UT-109 and UT-110 installation.CLONING.24-OPTION.26-MEMO.28

IMPORTANT

R CAUTION! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 2 to 4 in. (5 to 10 cm) away from the lips and the transceiver is vertical. R CAUTION! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. R CAUTION! NEVER short the terminals of the battery pack. DO NOT push the PTT when not actually desiring to transmit. AVOID using or placing the transceiver in direct sunlight or in areas with temperatures below +14F (10C) or above +122F (+50C). DO NOT modify the transceiver for any reason. KEEP the transceiver from the heavy rain, and NEVER immerse it in the water. The transceiver construction is water resistant, not water proof. The use of non-Icom battery packs/chargers may impair transceiver performance and invalidate the warranty. FCC caution: Changes or modications to this transceiver, not expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC regulations.

PANEL DESCRIPTION

Switches, controls, keys and connectors

w e r t y u

Speaker o Mic !0

P0 P1 P2 P3

D Programmable key reference
q VOLUME CONTROL [OFF/VOL] Turns power ON and adjusts the audio level. w DEALER-PROGRAMMABLE KEY [S1 (Red)] e PTT SWITCH [PTT] Push and hold to transmit; release to receive. r DEALER-PROGRAMMABLE KEY [S2(Black)] Y Z t UP/DOWN KEYS [Y]/[Z] Push to select the operating channel. Can be programmed as [ M ]/[ # ]. (SmarTrunk mode only) y DEALER-PROGRAMMABLE KEYS [P0]/[P1]/[P2]/[P3] Can each be programmed for one of several functions by your Icom Dealer. u 10-KEY PAD (IC-F3GT/IC-F4GT only) Used to enter DTMF codes, the operating channel, etc. i ANTENNA CONNECTOR Connects the supplied antenna. o [SP]/[MIC] JACK Connect optional speaker-microphone. !0 FUNCTION DISPLAY Displays the following information: CH number. 5-tone indication. Low-battery indication. DTMF numbers. Low-power indication. Skip-Ch indication. Audible indication. NOTE: Above functions depend on pre-setting.

S1 (Red) S2 (Black)

P0 P1 P2 P3 2

ACCESSORIES

Accessory attachment

D Supplied accessories

Function display

q w e r ty u i

The transceiver comes supplied with the following accessories. q Flexible antenna w Belt clip e 2251 OPT sheet (See p. 26)
o q TRANSMIT INDICATOR Appears during PTT on. w BUSY INDICATOR Appears while receiving a signal or when the squelch is open. e LOW POWER INDICATOR (p. 12) Appears when low output power is selected. r SCRAMBLER INDICATOR Appears while the scrambler function is operating. t KEY LOCK INDICATOR (p. 12) Appears during key lock function ON. y BELL INDICATION Appears or blinks when the optional 2/5Tone call is received. u AUDIBLE INDICATOR Appears when monitor function is turned ON. (CTCSS and DTCS mutes are released.) i LOW BATTERY INDICATOR [ ] -When appears, battery capacity is low and transmitting is impossible. - When ashes, battery capacity is nearly exhausted. o ALPHANUMERIC INDICATOR
D Antenna The antenna screws onto the transceiver as illustrated right. Keep the jack cover attached when jacks are not in use to avoid bad contacts.
D Belt clip Attach the belt clip to the transceiver as illustrated below.
To attach the belt-clip To release the belt-clip

BATTERY PACKS

Battery cautions

Battery pack replacement

Before replacing the battery pack, the volume control MUST be rotated fully counterclockwise, until a click is heard, to turn the power OFF. Push the battery release forward, then pull the battery pack upward with the transceiver facing you.

D BATTERY PACKS

Charging period Battery Voltage Capacity pack BC-146 BC-121 or BC-144 Operating period*1
CAUTION! NEVER short the terminals of the battery pack (or charging terminals of the transceiver). Also, current may ow into nearby metal objects such as a necklace, so be careful when placing battery packs (or the transceiver) in handbags, etc. Simply carrying with or placing near metal objects such as a necklace, etc. causes shorting. This will damage not only the battery pack, but also the transceiver. NEVER incinerate used battery packs. Internal battery gas may cause an explosion. NEVER immerse the battery pack in water. If the battery pack becomes wet, be sure to wipe it dry BEFORE attaching it to the transceiver. Clean the battery terminals to avoid rust or miss contact. Keep battery contacts clean. Its a good idea to clean battery terminals once a week. If your battery pack seems to have no capacity even after being charged, completely discharge it by leaving the power ON overnight. Then, fully charge the battery pack again. If the battery pack still does not retain a charge (or only very little charge), a new battery pack must be purchased. (P. 9)

Battery case for AA BP-208*2 (R6) 6 alkaline BP-209 BP-210 7.2 V 7.2 V 1100 mAh 1650 mAh 12 hrs 18.5 hrs 1.5 hrs 2.0 hrs

*hrs 11 hrs

*1 Operating periods are calculated under the following conditions; Tx : Rx : standby =5 : 5 : 90 *2 Output power is automatically reduced to 1 W to retains sufcient power 1100 in case of emergency, etc. *3 Operating period depends on the alkaline cells used.
D Recycling information (U.S.A. only) The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Call 1-800-822-8837 for battery recycling options in your area or contact your dealer.

Battery charging

D Rapid charging with the BC-144 The optional BC-144 provides rapid charging of optional battery packs. The following are additionally required: One AD-99 and an AC adapter (depending on version).
Turn power OFF. Check orientation for correct charging. (Insert together with AD-99.)
D Rapid charging with the BC-121+AD-94 (#11) The optional BC-121 allows up to 6 battery packs to be charged simultaneously. The following are additionally required. Six AD-94 (#11). An AC adapter (may be supplied with the BC-121 depending on version).

Turn power OFF.

BC-144 + AD-99
The BC-144 cannot be used in a vehicle, because the charger requires 16 V DC input.

AC adapter

(purchased separately)

Charge indicator

(each indicator functions independently)
D Spacer combination. Be sure to attach the spacer (Spacer B/C) to the adapter (Spacer A) with the orientation as illustrated in the diagram at right. Attach the spacer (Spacer B/C) to the adaptor with the orientation of the stamp pointing up. NOTE: Push the notch carefully when removing the spacer from the adaptor.
Check orientation and Spacer A

Spacer B/C

D Regular charging with Turn power OFF. the BC-137 #11/BC-146 The optional BC-137 #11 or BC-146 provides regular charging of optional battery pack with/without transceiver. The following is additionally required: An optional AC adapter.
(AD-99 is supplied with BC137 #11/BC-146)
Check orientation for correct charging. (Insert together with AD-99.)

BC-137 #11 or BC-146

Charging NOTE
Prior to using the transceiver for the rst time, the battery pack must be fully charged for optimum life and operation. Recommended temperature range for charging: +10C to +40C (50F to 140F). Use the supplied charger or optional charger (BC-121/BC-144 for rapid charging, BC-137 #11/BC-146 for regular charging) only. NEVER use other manufacturers chargers. The optional BP-209 or BP-210 battery packs include rechargeable Ni-Cd (Ni-MH: BP-210) batteries and can be charged approx. 300 times. Charge the battery pack before rst operating the transceiver or when the battery pack becomes exhausted. If you want to charge the battery pack more than 300 times, the following points should be observed: Avoid over charging. The charging period should be less than 20 hours. Use the battery until it becomes almost completely exhausted under normal conditions. We recommend battery charging after transmitting becomes impossible. D Battery pack life When the operating period becomes extremely short even after charging the battery pack fully, a new battery pack is needed.

Battery case (Option)

When using a BP-208 OPTIONAL BATTERY CASE attached to the transceiver, install 6 AA (R6) size alkaline batteries as illustrated below. NOTE: Output power is automatically reduced to 1 W to retains sufcient power in case of emergency, etc.
D CAUTIONS Use ALKALINE batteries only. Make sure all battery cells are the same brand, type and capacity. Never mix old and new batteries. Either of the above may cause a fire hazard or damage the transceiver. If ignored. Never incinerate used battery cells since internal battery gas may cause them to rupture. Never expose a detached battery case to water. If the battery case gets wet, be sure to wipe it dry before using.

PROGRAMMABLE FUNCTIONS

General
In the following explanations, programmable function names are bracketed, the specic switch used to activate the function depends on programming. D KEYPAD LOCK FUNCTION This function locks access to all programmable switches (except the switch assigned for the lock function). : Push and hold the [LOCK] switch for 1 sec. to toggle the lock function ON and OFF. appears while the lock function is ON. This function may be inhibited on some channels. D PRIORITY CHANNEL This function is used to select a pre-programmed channel at the push of a switch. Push the [PRIORITY] switch to select the priority channel. PRIO appears briey, then the priority channel is automatically selected. D SCAN FUNCTION The scan function allows you to search a pre-programmed group of channels for signals. Push the [SCAN] switch to start/stop scan. Scan pauses on a channel when receiving a signal. Depending on programming, a message may appear while scanning. Lockout SCAN (pre-programmed list SCAN) or Priority SCAN can be pre-programmed. When the Power-save function is activated, the transceiver
checks all pre-programmed channels then returns to the Powersave function again. D HIGH/LOW POWER OUTPUT This function selects high or low power for a channel. Push the [HIGH/LOW] switch to toggle between high and low power. LOW appears when low output power is selected. D SCRAMBLER FUNCTION (optional UT-109 #01* or UT-110 #01* is required.) This function provides higher communication security. UT-109: Non-rolling type. 32 code numbers are available. UT-110: Rolling type. 1020 (4 group 255) code numbers are available. Push the [SCRM] switch to toggle the function ON and OFF. NOTE: NEVER use #02 High AF level versions, as they are not compatible D BEEP FUNCTION This function provides confirmation beep tones when pushing switches. Push the [BEEP] switch to toggle the function ON and OFF.
D MONITOR AUDIBLE FUNCTION The monitor function allows you to open the transceivers squelch manually to check whether a channel is busy or not. The transceiver has 2 conditions for receive standby: Audible condition: This condition mutes audio ONLY when no carrier is present. You can receive (or monitor) any signals on a channel. Push and hold the [MONI/AUDI], switch to select the audible condition. Any audio mute functions are cancelled while pushing the [MONI/AUDI] switch. Inaudible condition: This condition mutes ALL signals except those directed to you. Therefore you should check a channels condition (busy or not) with the monitor function before transmitting. Push the [MONI/AUDI] switch momentarily to select the inaudible condition.

D DTMF TRANSMISSION This function allows you to send a pre-programmed DTMF code to control a repeater, open another transceivers squelch, etc. Manual transmission: Push desired digit keys in sequence while pushing [PTT]. Pushing [PTT] may not be necessary depending on programming. Automatic pre-programmed transmission: q Push the [DTMF] switch to select DTMF autodial mode, then push [Y] or [Z] to select the desired channel. w Push the [DTMF] switch once more to send a DTMF code. D DTMF RE-DIAL FUNCTION This function allows you to transmit the last-used DTMF code at the push of a key. Push the [DTMF RE-DIAL] switch momentarily to activate the function. The previously transmitted DTMF code is automatically transmitted. If no code has been transmitted since turning the power ON, this function does not activate. D EMERGENCY FUNCTION The emergency function allows you to send your ID quickly and easily to your Base Station, etc. in case of emergency. Push and hold the [EMERGENCY] switch for 1 sec. to activate the emergency function. The transceiver selects a pre-programmed channel, then sends an emergency signal to your Base Station. The pre-programmed channel remains selected until a control signal is received from the Base Station, or power is turned OFF.

All signals are received

Only signals containing the proper tone are received
D TALK AROUND The talk around function changes duplex channels to simplex channels. Duplex allows you to contact your base station, repeaters, etc. Simplex allows you to contact other portable transceivers directly (portable-to-portable contact). Push the [TALK AROUND] switch one or more times to toggle the function ON and OFF.

CONVENTIONAL OPERATION

Receiving and transmitting
The emergency call is repeatedly transmitted at pre-programmed intervals. D DISPLAY LIGHTING The function display has 3 backlight conditions. OFF : No backlight is available. AUTO : When any key is pushed, the backlight turns ON for 5 sec. automatically. CONTINUOUS : Backlight turns ON continuously. D SmarTrunk II functions This transceiver provides SmarTrunk II functions. (Optional UT-105 SmarTrunk II Logic Board is required.) The optional UT-105 allows communication over conventional channels or SmarTrunk II channels. Select a channel bank for SmarTrunk II before trunking operation. To toggle SmarTrunk II channels and conventional channels. Push the [Bank Up] switch one or more times. Scanning starts when a channel bank for SmarTrunk II is selected. Contact your dealer for channel bank details. (See p.21 for more detailed operation.)

NOTE: Transmitting without an antenna may damage the transceiver. See p.1 for antenna attachment. Turn power ON as described on p. 1. Receiving: q Push [Y]/[Z] to select a channel. w Listen for a transmission and adjust [VOL] to a comfortable listening level. When no transmission is heard, push and hold monitor while adjusting [VOL] (your transceiver may not be programmed with the monitor function). The transceiver is now set to receive desired calls on the selected channel. Transmitting: Wait for the channel to become clear to avoid interference. e While pushing and holding [PTT], speak into the microphone at a normal voice level. When a tone signalling system is used, the call procedure described at right may be necessary. r Release [PTT] to return to receive. IMPORTANT: To maximize the readability of your transmitted signal, pause a few sec. after pushing [PTT], hold the microphone 10 to 15 cm from your mouth and speak at a normal voice level.

Call procedure

When your system employs tone signalling (excluding CTCSS and DTCS), the call procedure may be necessary prior to voice transmission. The tone signalling employed may be a selective calling system which allows you to call specic station(s) only and prevent unwanted stations from contacting you. q Select the desired Tx code channel or 5-tone code according to your System Operators instructions. This may not be necessary depending on programming. Refer to the next page for selection. w Push the call switch (assigned to one of the dealer programmable switches: [P0], [P1], [P2], [P3], [S1] and [S2]). e After transmitting a 5-tone code, the remainder of your communication can be carried out in the normal fashion.
Tx code channel selection
Your radio may be programmed for Tx code channel selection. In this case, you can choose a Tx code channel to be transmitted when using the call function (p. 7). Push the Tx code channel switch (assigned to one of the dealerprogrammable switches) to activate the function, then enter digits via the keypad to select the desired Tx code channel. The selected code channel (containing a pre-programmed 5-tone code) is transmitted when using the call function.

Manual 5-tone codes

Depending on programming, you may be able to send 5-tone codes manually. Push the Tx code switch to activate the function, then enter the desired transmit code (up to 7 digits) using the keypad. Activate the call function to transmit the 5-tone code. Blinking indicates keypad entry is acceptable.

Selective calling

Non-selective calling

Transmitting notes

D TIME-OUT TIMER After continuous transmission for a pre-programmed period, the time-out timer is activated, causing the transceiver to stop transmitting and automatically select receive.
D PENALTY TIMER Once the time-out timer is activated, transmission is further inhibited for a period determined by the penalty timer.

SmarTrunk IITM OPERATION

Basic operation
These features are enabled by your Dealer or System operator and may not be available in your system. Contact your Dealer for details. Push the [Bank Up] switch one or more times to select a channel bank for conventional channels or SmarTrunk II channels. Scanning starts when a channel bank for SmarTrunk II is selected. D PTT dispatch operation *1 q Push [PTT] once (without dialling) to initiate a dispatch call. w Begin talking after you hear three beeps (one short, highpitched, two very-short, low-pitched). e Receiving a dispatch call is indicated by the same three-beep sequence. It is not necessary to push [M] to answer a dispatch call. D System busy indication If all channels are busy, three low beeps sound after you initiate a call. Try the call again later. D Receiving a subscriber-to-subscriber call *1 When you hear ringing, push [M] to answer. For a group call, you hear a short ring followed by two short beeps. You do not have to answer a group call to hear it over the air. D Receiving a landline-to-subscriber call *1 When you hear ringing, push [M] to answer. For a group call, you hear a short ring followed by two short beeps. You do not have to answer a group call to hear it over the air.
D Terminating a call *1 After completing a call, push [#] to disconnect (hang up). IMPORTANT: If one person in the conversation terminates a call, all participants will be cut off. D Last number redial *1 Push [M], [M] to automatically redial the last number called. A high-pitched beep indicates that the number is accepted. *1: This function is available to for the IC-F3GS/IC-F4GS when the [Y]/[Z] keys are assigned the [M]/[ # ] key functions. D Turbo SpeeDial To automatically dial a commonly used number with one push: Push one of the turbo SpeeDial keys. D Programming memory speed dial q Push and hold [M] until you hear a high-pitched beep. w Enter the memory location (09, A, B, C, D), the telephone or subscriber number, then [1], [M] (or [3], [M] if for another system subscriber). A high-pitched beep indicates successful programming. Memories [A][D] are used for the Turbo SpeeDial. NOTE: This function is available for the IC-F3GT/IC-F4GT only. D Memory speed-dialling *2 To automatically dial a commonly used number from memory: Push [M] followed by the memory location (09).

OTHER FUNCTIONS

DTMF PAGER/CODE SQUELCH
D Clear channel alerting If all channels are busy, the transceiver automatically begins searching for an open channel and beeps every ten seconds. When two short beeps (low-pitched, then high-pitched) are heard, a channel is available. Push [M], [M] immediately to redial the last number. D Emergency call Push [0], [M] to initiate an emergency call. Contact your Dealer for details.

When you install optional the UT-108 DTMF DECODER UNIT into the transceiver, DTMF pager function or code squelch function will be available. D DTMF pager This function uses DTMF tones for calling and can be used as a common pager to inform you that one of your group has called even if the operator is temporarily away from the transceiver. When the connection code is received, a beep sounds, then flashes and shows the called stations code number. Called stations code number are memorised automatically, and are easy to re-call with ID-MR select function. D Code squelch This conveniently eliminates unwanted audio and is useful in group activities or security related activities where unwanted output can be a problem. The function is similar to a CTCSS tone squelch. In order to use the above functions, cloning is necessary via a PC using the optional CS-F3G cloning software. Using this software, the transceivers model, individual RX Code CH, TX Code CH, Special Tone Link2 (must be E) on 5Tone screen, 5Tone Signaling Form on Memory-CH screen, Log, RX C-No, Key&Display, Common AutoReset TimerB, and other settings related to operation can be set. Refer to the HELP file that comes with the CS-F3G CLONING SOFTWARE for available settings.
D Placing a telephone call *2 Enter the phone number followed by [1], [M]. A high-pitched beep indicates that the number is accepted. When the called party answers, push the [PTT] switch to talk, and release it to listen. D Calling another local system subscriber *2 Enter the subscriber number followed by [3], [M]. A high-pitched beep indicates that the number is accepted. You hear ringing, then two short beeps when the subscriber answers. If the other subscriber is on another call or out of range, you hear a fast busy signal and the call terminates automatically. *1: This function is available for the IC-F3GS/IC-F4GS when the [Y]/[Z] keys are assigned the [M]/[ # ] key functions. *2: This function is available for the IC-F3GT/GS,IC-F4GT/GS only. Use the Turbo SpeeDial function instead. For additional operating instructions, contact your Dealer or System Operator.

MAINTENANCE

Cloning

CLONING

Optional UT-96/ UT-105/ UT-108/ UT-109/ UT-110/ UT-111 and UT-113 installation
You can install one of the following optional signaling units in the transceiver. UT-96 2TONE/5TONE UNIT, UT-105 SmarTrunk(TM) Logic Board, UT-108 DTMF DECODER UNIT, UT-109/ UT-110 SCRAMBLER UNIT , UT-111 TRUNKING BOARD or UT-113 MAN DOWN UNIT. q Remove the optional connecter access cover (named 2251 OPT sheet). Insert a screwdriver into the
hollow of the chassis, then lift and take away the cover. (The cover can not be used again.)
Cloning allows you to quickly and easily transfer the programmed contents from one transceiver to another transceiver; or data from PC to a transceiver using the optional CS-F3G CLONING SOFTWARE. D Transceiver-to-transceiver cloning q Connect the optional OPC-474 CLONING of the master and slave transceivers.

to the [SP] jack

The master transceiver is used to send data to the slave transceiver.
Y w While pushing [P0] and [Y], turn the transceivers power on to enter cloning mode (For both the master transceiver and slave transceiver). CLONE appears and the transceiver enters the clone standby

condition.

w Attach the desired optional unit. Insert the connector tightly to avoid a bad contact. e Remove the paper backing of 2251 OPT sheet supplied as an accessory. r Attach the new 2251 OPT sheet to the service window. t Program the necessary information with the cloning software before operation. r Please ask your dealer or system operator for details.
e Push [PTT] on the master transceiver. CLOUT appears in the master transceivers display. CL IN appears automatically in the slave transceivers display. When cloning is finished, CLONE appears in the master transceivers display. NOTE: DO NOT push the [PTT] on the slave transceiver during cloning. This will cause a cloning error.
r When cloning is nished, turn power off, then on again to return to normal operation.
NOTE: Transceiver-to-transceiver cloning can not be done between 40CH version and 100CH version, or CPU Rev.1. and Rev.2.0.
Y While pushing [P3] and [Y], turn the transceivers power on to enter CPU version check mode. CPU revision is displayed (100CH display for 100CH version only).

OPTION

Options
D PC-to-transceiver cloning Please refer to the HELP file that comes with the CS-F3G CLONING SOFTWARE.
CAUTION: Imprudent cloning operation causes a cloning error. In such a case, memory contents may be lost. Cloning must then be repeated.

D BATTERY PACKS BP-208 BATTERY CASE Allows a set of Alkaline batteries to operate the handheld when charging the rechargeable battery or in emergencies, etc. 6 AA (R6) cells are required. BP-209 Ni-Cd BATTERY PACK 7.2 V/1100 mAh Ni-Cd battery pack, allows more than 8 hours operation. BP-210 Ni-HM BATTERY PACK 7.2 V/1650 mAh Ni-MH battery pack, allows approx. 11 hours operation. D CHARGER BC-144 DESKTOP CHARGER + BC-145 AC ADAPTOR For rapid charging of battery packs. An AC adapter is supplied with the charger. Charging time: 1.5 to 2 hrs. BC-137 (#11) BATTERY CHARGER + BC-122 AC ADAPTOR For regular charging of battery packs. An AC adapter is additionally required. Charging time: 15 hrs. BC-146 BATTERY CHARGER + BC-147 AC ADAPTOR For regular charging of battery packs. An AC adapter is additionally required. Charging time: 18.5 hrs. BC-121 MULTI-CHARGER + AD-94 (#11) CHARGER ADAPTOR (6 pcs.) For rapid charging of up to 6 battery packs (six AD-94s are required) simultaneously. An AC adapter may be supplied depending on version. Charging time: 1.5 to 2 hrs. BC-119 DESKTOP CHARGER + AD-94 (#11) CHARGER ADAPTOR For rapid charging of battery packs. An AC adapter is supplied with the charger. Charging time: 1.5 to 2 hrs.

10 OPTIONS

D OTHER OPTIONS UT-96 2/5TONE UNIT Provides 2/5Tone capabilities. UT-105 SmarTrunkIITM Logic Board Provides SmarTrunkIITM capabilities. UT-108 DTMF DECODER UNIT Provides DTMF decode and ANI capabilities. UT-109/UT-110 SCRAMBLER UNIT Non-rolling type(UT-109)/ Rolling type voice scrambler unit provides higher communication security. UT-111 TRUNKING BOARD Provides trunking operation. UT-113 MAN DOWN UNIT Provides a measure of safety when working in a hazardous environment, etc. HM-46L/HM-75A/HM-131L SPEAKER-MICROPHONES Combination speaker-microphone that provides convenient operation while hanging the transceiver from your belt. HS-51 HEAD SET Allows you hands-free operation. Includes VOX, PTT and TOT. SP-13 EARPHONE Provides clear receive audio in noisy environments. MB-74 BELT CLIP Exclusive alligator-type belt clip for IC-F3GT/GS, IC-F4GT/GS. AD-98FSC ANTENNA CONNECTOR ADAPTER Allows you to connect a BNC-type antenna. CS-F3G CLONING SOFTWARE Allows you to clone the memory contents of an IC-F3GT/GS, IC-F4GT/GS by PC editing. OPC-474 CLONING CABLE Cloning cable for transceiver to transceiver OPC-478 CLONING CABLE Cloning cable for PC to transceiver.

*All Impact Charger prices include the appropriate number of charger cups in the above charger prices

Page 5

Icom (I1):
Maxon/Legacy: SL25, SL55, SP120, SP130, SP140, SP100, PL1145, PL2215, PL24125, PL2245, PL2445 All COBRA 2-pin radios Vertex: VX-200, VX-500, VX-510, VX-520UD Motorola: TalkAbout 200, 250, Distance and Distance DPS Icom: IC-F3, IC-F3S, IC-F4, IC-F4S, IC-F10, IC-F20, IC-H2, IC-H6, IC-J12, IC-M5, IC-U12, IC-U16, ICF30G, IC-F31, IC-F4TR, IC-F4008, IC-F4088A All Icom dual pin amateur radios Platinum Series Accessories Ritron: Patriot, RTX, SST, Jobcom, JMX and MBX
Part Number Surveillance Kits: I1-P1W-AT1 I1-P1W-D1 I1-P2W-AT1 I1-P2W-D1 Speaker Mics: I1-PRSM-HD2-NC Headsets: I1-PBH-1 Bone Induction Mics: I1-PBM-1 $102.30 Bone Induction Mic $71.50 Behind the head single muff headset $74.80 Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic $82.50 $82.50 $102.30 $102.30 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger MSRP Product Description
Optional Ring Finger PTT (for PBM/GTM mics): FPTT-1 $18.70 Optional Ring Finger PTT (for PBM/GTM mics)

Gold Series Accessories

Part Number MSRP Product Description Surveillance Kits (please choose ear options below): I1-G1W I1-G2W Speaker Mics: I1-GRSM-MD3 Headsets: I1-GHS-MB1 Interchangeable Ear Options: AT4 AT2 D1 D2 EH1 EB1 MLS1 AT6 EH1VC EH2 EH3 EH4 $33.00 $33.00 $33.00 $15.50 $17.75 $6.75 $21.00 $17.75 $22.00 $17.75 $17.75 $26.50 High output "tubular" style transducer with clear acoustic tube & ear bud Quick disconnect acoustic tube and ear bud Adjustable rubber D-shaped ear hanger Flexible rubber fixed D-shaped ear hanger Rubber ear hanger and ear bud Walkman style ear bud Mini shoulder/lapel speaker with clip Basic acoustic tube Rubber ear hanger and ear bud with inline volume control Rubber hook and adjustable ear bud Rubber ear hanger with ear pad Ear hook with direct in-ear bud $37.40 Rubber D shaped ear hanger headset with swivel mini-boom gooseneck mic and mini inline PTT $55.00 Medium duty remote speaker microphone $20.90 $38.50 1-Wire Surveillance kit w/inline FULL SIZE PTT 2-Wire Surveillance Kit w/inline FULL SIZE PTT

Page 6

Icom (I2):
Icom: IC-F3G, IC-F3GS, IC-G3GT, IC-F4G, IC-F4GS, IC-F4GT, IC-F43GS, IC-F43GT, IC-F43TR, ICF11, IC-F11S, IC-F14, IC-F14S, IC-F15, IC-F21, IC-F21S, IC-F22, IC-F24, IC-F24S, IC-F31, IC-F33, IC-F43, BC100, IC-F3001, IC-F3011, IC-F3021, IC-F3021S, IC-F3021T, IC-F4001, IC-F4011, ICF4021, IC-F4021S, IC-F4021T

Page 9

Kenwood (K1):
HYT/HYTERA: TC620, TC700EX Relm: RPU416, RPV516, RPU499, RPV599X, RPV516A, RPV599A Plus, RPU416A, RPU499A Plus, RPU4200 Kenwood: TK-208, TK-220, TK-240, TK-240D, TK-248, TK-250, TK-260, TK-260G, TK-270, TK-270G, TK-308, TK-340, TK-340D, TK-348, TK-350, TK-353, TK-360, TK-360G, TK-370, TK-370G, TK-372G, TK-430, TK-431 TK-2100(Pro Talk),2102(Pro Power),2130(Pro Talk XLS),2160, TK-2212, TH-22AT, TH-77A, TH-78A, TH-D7A(G), TH-235A, TH-28A, TH-42AT, TH-48A, TH-G71A, TH-F6, TH-F6A, TH-K2AT, TK-320, TKPlatinum Series Accessories TK-2170, TK-2200, TK-2202, TK-2300, TK-2360, TK-3201, TK-3170, TK-3173, TK-3200, TK373, 3212, TK-3230, TK-3350, TK-3360, TK-3202 Part Number MSRP Product Description TK-3100(Pro Talk),TK-3101(Free Talk XL),TK-3102(Pro Power) Surveillance Kits: TK-3130(Pro Talk XLS),3131(Free Talk XLS),3160 PTT with QD Acoustic Tube K1-P1W-AT1 $82.50 1-Wire Surveillance Kit with full size
K1-P1W-D1 K1-P2W-AT1 K1-P2W-D1 K1-P3W-AT1 K1-P3W-D1 K1-P3W-3.5-WPTT K1-P3W-AT1-WPTT K1-PBTHS-1 $82.50 $102.30 $102.30 $118.80 $118.80 $180.40 $180.40 $242.00 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger Ghost II 3 Wire Surveillance Kit with wireless PTT 3-Wire Surveillance Kit with wireless PTT and acoustic tube Bluetooth Surveillance Kit with interchangeable ear options
Noise Cancelling Surveillance Kits: K1-P2W-AT1-NC K1-P2W-D1-NC $115.50 $115.50 2-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 2-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger
Listen Only Surveillance Kits: K1-PLO-AT1 K1-PLO-D1 Speaker Mics: K1-PRSM-HD1 K1-PRSM-HD1-WPTT K1-PRSM-HD2-NC K1-PRSM-HD3 K1-PRSM-HD4 Headsets: K1-PBH-1 K1-PBH-2-WPTT K1-PDM-1-NC K1-POH-1 K1-POH-2 Bone Induction Mics: K1-PBM-1 $102.30 Bone Induction Mic $71.50 $136.40 $283.80 $71.50 $71.50 Behind the head single muff headset Behind the head headset with wireless PTT Behind the head double muff Heavy Duty headset Over the head single muff headset Over the head, OEM style metal headband, single muff headset $63.80 $136.40 $74.80 $70.40 $92.40 Heavy Duty Remote Speaker Mic w/3.5mm accessory jac Heavy Duty Remote Speaker Mic w/3.5mm accessory jac and wireless PTT Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic Speaker Mic w/ 3.5mm jack Heavy Duty Speaker Mic w/ 3.5mm jac and tough polycarbonate casing $52.80 $52.80 1-Wire Listen Only with QD Acoustic Tube 1-Wire Listen Only with D-shape Ear Hanger

Noise Cancelling Surveillance Kits: K2-P2W-AT1-NC K2-P2W-D1-NC $135.30 $135.30 2-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 2-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger
Listen Only Surveillance Kits: K2-PLO-AT1 K2-PLO-D1 Speaker Mics: K2-PRSM-HD1 K2-PRSM-HD2-NC K2-PRSM-HD3 K2-PRSM-HD4 Headsets: K2-PDM-1-NC K2-POH-1 K2-POH-2 Bone Induction Mics: K2-PBM-1 $122.10 Bone Induction Mic $305.80 $85.80 $85.80 Behind the head double muff Heavy Duty headset Over the head single muff headset Over the head, OEM style metal headband, single muff headset $78.10 $89.10 $82.50 $102.30 Heavy Duty Remote Speaker Mic w/3.5mm accessory jac Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic Speaker Mic w/ 3.5mm jack Heavy Duty Speaker Mic w/ 3.5mm jac and tough polycarbonate casing $60.50 $60.50 1-Wire Listen Only with QD Acoustic Tube 1-Wire Listen Only with D-shape Ear Hanger
Part Number MSRP Product Description Surveillance Kits (please choose ear options below): K2-G1W K2-G2W Speaker Mics: K2-GRSM-MD3 Interchangeable Ear Options: AT4 AT2 D1 D2 EH1 EB1 MLS1 AT6 EH1VC EH2 EH3 EH4 $33.00 $33.00 $33.00 $15.50 $17.75 $6.75 $21.00 $17.75 $22.00 $17.75 $17.75 $26.50 High output "tubular" style transducer with clear acoustic tube & ear bud Quick disconnect acoustic tube and ear bud Adjustable rubber D-shaped ear hanger Flexible rubber fixed D-shaped ear hanger Rubber ear hanger and ear bud Walkman style ear bud Mini shoulder/lapel speaker with clip Basic acoustic tube Rubber ear hanger and ear bud with inline volume control Rubber hook and adjustable ear bud Rubber ear hanger with ear pad Ear hook with direct in-ear bud $72.60 Medium duty remote speaker microphone $42.90 $60.50 1-Wire Surveillance kit w/inline FULL SIZE PTT 2-Wire Surveillance Kit w/inline FULL SIZE PTT

Page 12

Motorola (M1):
Motorola: CP88, CP100, CP150, CP200, CT150, CT250, CT450, CT450LS, GP2000, GP300, GP308, GP68, GP88, BC120, GTI, GTX, LTS2000, PR400, P040, P080, P110, P1215, P1225LS, PRO3150, SP10, SP21, SP50, XTN446, XTN500, XTN600, XV1100, XV2100, XU1100, XU2100, XU2600, VL130, VL50, MAG ONE/BPR40, BC90, CP125, CP185, DTR Series, GP280, CLS Series, BC10, BC130, GP350 (requires Motorola adapter HLN9482) Tekk: XU100, XV100, XU1000, XV1000 Relm: RP6500
Part Number Surveillance Kits: M1-P1W-AT1 M1-P1W-D1 M1-P2W-AT1 M1-P2W-D1 M1-P3W-AT1 M1-P3W-D1 M1-P3W-3.5 M1-PBTHS-1 $82.50 $82.50 $102.30 $102.30 $118.80 $118.80 $142.56 $242.00 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger GHOST 3-Wire Surveillance Kit with barrel PTT and 3.5mm jack Bluetooth Surveillance Kit with interchangeable ear options MSRP Product Description

Noise Cancelling Surveillance Kits: M1-P1W-AT1-NC M1-P1W-D1-NC M1-P2W-AT1-NC M1-P2W-D1-NC $95.70 $95.70 $115.50 $115.50 1-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 1-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger 2-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 2-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger
Listen Only Surveillance Kits: M1-PLO-AT1 M1-PLO-D1 Speaker Mics: M1-PRSM-HD1 M1-PRSM-HD2-NC M1-PRSM-HD3 M1-PRSM-HD4 Headsets: M1-PBH-1 M1-PBH-1-NC M1-PDM-1-NC M1-POH-2 M1-PTHS-1 Bone Induction Mics: M1-PBM-1 Throat Mics: M1-PTM-1 M1-PTM-3 $261.80 $367.40 Heavy Duty Throat Mic (includes ring finger PTT switch) Heavy Duty Throat Mic with Professional PTT $102.30 Bone Induction Mic $71.50 $71.50 $283.80 $71.50 $400.40 Behind the head single muff headset Behind the head single muff headset with background noise canceling mic Behind the head double muff Heavy Duty headset Over the head, OEM style metal headband, single muff headset Heavy Duty Temple Transducer Headset with Professional PTT $63.80 $74.80 $70.40 $92.40 Heavy Duty Remote Speaker Mic w/3.5mm accessory jac Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic Speaker Mic w/ 3.5mm jack Heavy Duty Speaker Mic w/ 3.5mm jac and tough polycarbonate casing $52.80 $52.80 1-Wire Listen Only with QD Acoustic Tube 1-Wire Listen Only with D-shape Ear Hanger

Page 13

Part Number MSRP Product Description Surveillance Kits (please choose ear options below): M1-G1W M1-G2W $20.90 $38.50 1-Wire Surveillance kit w/inline FULL SIZE PTT 2-Wire Surveillance Kit w/inline FULL SIZE PTT
Listen Only Surveillance Kits (please choose ear options below): M1-GLO Speaker Mics: M1-GRSM-MD3 Headsets: M1-GHS-MB1 $37.40 Rubber D shaped ear hanger headset with swivel mini-boom gooseneck mic and mini inline PTT $55.00 Medium duty remote speaker microphone $13.20 1-Wire Listen Only
Throat Mics (please choose ear options below): M1-GTM-1 $110.00 Medium duty throat mic
Part Number Surveillance Kits: M1-S1W-AT3 M1-S1W-D2 M1-S1W-EB1 M1-S1W-EH1 $24.20 $24.20 $16.50 $19.Wire Surveillance Kit with screw-in surgical acoustic tube 1 Wire Surveillance Kit with non-adjustable D-shape ear hanger 1 Wire Surveillance Kit with foam covered walkman style ear bud 1 Wire Surveillance Kit with flexible rubber ear hook with foam covered adjustable ear bud MSRP Product Description

Page 14

Motorola (M2):
Motorola: MTP700, GP1280, GP140, GP320, GP328, GP329, GP338, GP339, GP340, GP360, GP380, GP640, GP650, GP680, HT1250, HT1250LS, HT1550, HT1550XLS, HT750, MTX8250, MTX8250LS, MTX850, MTX850LS, MTX9250, MTX950, PRO5150, PRO5350, PRO5450, PRO5550, PRO5750, PRO7150, PRO7350, PRO7450, PRO7550, PRO9150, PTX700, PTX760, PTX780, MTX950, PR860, PRO7750 HYT/HYTERA: TC980
Part Number Surveillance Kits: M2-P1W-AT1 M2-P1W-D1 M2-P2W-AT1 M2-P2W-D1 M2-P3W-AT1 M2-P3W-D1 M2-PBTHS-1 $102.30 $102.30 $122.10 $122.10 $135.30 $135.30 $253.00 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger Bluetooth Surveillance Kit with interchangeable ear options MSRP Product Description

Page 17

Motorola (M6):
Motorola: VISAR radio series, 3.5mm Threaded Connector. Also compatible with: M5-AD-M6 adapter converts M6 connector for use on M5 radio models (see M5 supported models) M11-AD-M6 adapter converts M6 connector for use on M11 radio models (see M11 supported models) M2-AD-M6 adapter converts m6 connector for use on M2 radio models (see M2 supported models)
Part Number Surveillance Kits: M6-P1W-AT1 M6-P1W-D1 M6-P2W-AT1 M6-P2W-D1 M6-P3W-AT1 M6-P3W-D1 $82.50 $82.50 $102.30 $102.30 $118.80 $118.80 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger MSRP Product Description
Noise Cancelling Surveillance Kits: M6-P1W-AT1-NC M6-P1W-D1-NC M6-P2W-AT1-NC M6-P2W-D1-NC $95.70 $95.70 $115.50 $115.50 1-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 1-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger 2-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 2-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger
Listen Only Surveillance Kits: M6-PLO-AT1 M6-PLO-D1 Speaker Mics: M6-PRSM-HD2-NC M6-PRSM-HD3 Headsets: M6-PBH-1 M6-POH-1 Bone Induction Mics: M6-PBM-1 $102.30 Bone Induction Mic $71.50 $71.50 Behind the head single muff headset Over the head single muff headset $74.80 $70.40 Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic Speaker Mic w/ 3.5mm jack $52.80 $52.80 1-Wire Listen Only with QD Acoustic Tube 1-Wire Listen Only with D-shape Ear Hanger
Part Number MSRP Product Description Surveillance Kits (please choose ear options below): M6-G1W Interchangeable Ear Options: AT4 AT2 D1 D2 EH1 EB1 MLS1 AT6 EH1VC EH2 EH3 EH4 $33.00 $33.00 $33.00 $15.50 $17.75 $6.75 $21.00 $17.75 $22.00 $17.75 $17.75 $26.50 High output "tubular" style transducer with clear acoustic tube & ear bud Quick disconnect acoustic tube and ear bud Adjustable rubber D-shaped ear hanger Flexible rubber fixed D-shaped ear hanger Rubber ear hanger and ear bud Walkman style ear bud Mini shoulder/lapel speaker with clip Basic acoustic tube Rubber ear hanger and ear bud with inline volume control Rubber hook and adjustable ear bud Rubber ear hanger with ear pad Ear hook with direct in-ear bud $20.90 1-Wire Surveillance kit w/inline FULL SIZE PTT

Page 18

Motorola (M7):
Motorola: 6 pin quick disconnect connector. See adapter page.
Part Number Surveillance Kits: M7-P1W-AT1 M7-P1W-D1 M7-P2W-AT1 M7-P2W-D1 M7-P3W-AT1 M7-P3W-D1 M7-P3W-3.5 M7-P3W-3.5-WPTT M7-P3W-AT1-WPTT M7-PBTHS-1 $104.50 $104.50 $126.50 $126.50 $143.00 $143.00 $171.60 $195.80 $195.80 $257.40 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger GHOST 3-Wire Surveillance Kit with barrel PTT and 3.5mm jack Ghost II 3 Wire Surveillance Kit with wireless PTT 3-Wire Surveillance Kit with wireless PTT and acoustic tube Bluetooth Surveillance Kit with interchangeable ear options MSRP Product Description

Page 22

Motorola (M11):
Motorola: TRBO, XPR6300, XPR6500, XPR6350, XPR6380, XPR6550, XPR6580 and APX7000 Series
Part Number Surveillance Kits: M11-P1W-AT1 M11-P1W-D1 M11-P2W-AT1 M11-P2W-D1 M11-P3W-AT1 M11-P3W-D1 $104.50 $104.50 $126.50 $126.50 $143.00 $143.00 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger MSRP Product Description
Noise Cancelling Surveillance Kits: M11-P2W-AT1-NC M11-P2W-D1-NC $139.70 $139.70 2-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 2-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger
Listen Only Surveillance Kits: M11-PLO-AT1 M11-PLO-D1 Speaker Mics: M11-PRSM-HD1 M11-PRSM-HD2-NC M11-PRSM-HD3 Headsets: M11-PBH-1 M11-POH-1 M11-POH-2 Bone Induction Mics: M11-PBM-1 $126.50 Bone Induction Mic $85.80 $85.80 $85.80 Behind the head single muff headset Over the head single muff headset Over the head, OEM style metal headband, single muff headset $84.70 $95.70 $89.10 Heavy Duty Remote Speaker Mic w/3.5mm accessory jac Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic Speaker Mic w/ 3.5mm jack $64.90 $64.90 1-Wire Listen Only with QD Acoustic Tube 1-Wire Listen Only with D-shape Ear Hanger
Part Number MSRP Product Description Surveillance Kits (please choose ear options below): M11-G1W M11-G2W Interchangeable Ear Options: AT4 AT2 D1 D2 EH1 EB1 MLS1 AT6 EH1VC EH2 EH3 EH4 $33.00 $33.00 $33.00 $15.50 $17.75 $6.75 $21.00 $17.75 $22.00 $17.75 $17.75 $26.50 High output "tubular" style transducer with clear acoustic tube & ear bud Quick disconnect acoustic tube and ear bud Adjustable rubber D-shaped ear hanger Flexible rubber fixed D-shaped ear hanger Rubber ear hanger and ear bud Walkman style ear bud Mini shoulder/lapel speaker with clip Basic acoustic tube Rubber ear hanger and ear bud with inline volume control Rubber hook and adjustable ear bud Rubber ear hanger with ear pad Ear hook with direct in-ear bud $42.90 $60.50 1-Wire Surveillance kit w/inline FULL SIZE PTT 2-Wire Surveillance Kit w/inline FULL SIZE PTT

Noise Cancelling Surveillance Kits: SP1-P2W-AT1-NC SP1-P2W-D1-NC $115.50 $115.50 2-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 2-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger
Listen Only Surveillance Kits: SP1-PLO-AT1 SP1-PLO-D1 Speaker Mics: SP1-PRSM-HD1 SP1-PRSM-HD2-NC Headsets: SP1-PBH-1 SP1-POH-2 Throat Mics: SP1-PTM-1 $261.80 Heavy Duty Throat Mic (includes ring finger PTT switch) $71.50 $71.50 Behind the head single muff headset Over the head, OEM style metal headband, single muff headset $63.80 $74.80 Heavy Duty Remote Speaker Mic w/3.5mm accessory jac Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic $52.80 $52.80 1-Wire Listen Only with QD Acoustic Tube 1-Wire Listen Only with D-shape Ear Hanger

Page 29

Sepura (SP2):
Sepura: With locking screw - SRP2000, SRP3000 SRH3500, SRH3800
Part Number Surveillance Kits: SP2-P1W-AT1 SP2-P1W-D1 SP2-P2W-AT1 SP2-P2W-D1 SP2-P3W-AT1 SP2-P3W-D1 $82.50 $82.50 $102.30 $102.30 $118.80 $118.80 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger MSRP Product Description
Noise Cancelling Surveillance Kits: SP2-P2W-AT1-NC SP2-P2W-D1-NC $115.50 $115.50 2-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 2-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger
Listen Only Surveillance Kits: SP2-PLO-AT1 SP2-PLO-D1 Speaker Mics: SP2-PRSM-HD1 SP2-PRSM-HD2-NC Headsets: SP2-PBH-1 SP2-POH-2 Throat Mics: SP2-PTM-1 $261.80 Heavy Duty Throat Mic (includes ring finger PTT switch) $71.50 $71.50 Behind the head single muff headset Over the head, OEM style metal headband, single muff headset $63.80 $74.80 Heavy Duty Remote Speaker Mic w/3.5mm accessory jac Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic $52.80 $52.80 1-Wire Listen Only with QD Acoustic Tube 1-Wire Listen Only with D-shape Ear Hanger

Part Number MSRP Product Description Surveillance Kits (please choose ear options below): SP2-G1W SP2-G2W $20.90 $38.50 1-Wire Surveillance kit w/inline FULL SIZE PTT 2-Wire Surveillance Kit w/inline FULL SIZE PTT
Listen Only Surveillance Kits (please choose ear options below): SP2-GLO Interchangeable Ear Options: AT4 AT2 D1 D2 EH1 EB1 MLS1 AT6 EH1VC EH2 EH3 EH4 $33.00 $33.00 $33.00 $15.50 $17.75 $6.75 $21.00 $17.75 $22.00 $17.75 $17.75 $26.50 High output "tubular" style transducer with clear acoustic tube & ear bud Quick disconnect acoustic tube and ear bud Adjustable rubber D-shaped ear hanger Flexible rubber fixed D-shaped ear hanger Rubber ear hanger and ear bud Walkman style ear bud Mini shoulder/lapel speaker with clip Basic acoustic tube Rubber ear hanger and ear bud with inline volume control Rubber hook and adjustable ear bud Rubber ear hanger with ear pad Ear hook with direct in-ear bud $13.20 1-Wire Listen Only

Page 30

Sepura (SP3):
Sepura: Bottom mount - SRP2000, SRP3000 SRH3500, SRH3800
Part Number Surveillance Kits: SP3-P1W-AT1 SP3-P1W-D1 SP3-P2W-AT1 SP3-P2W-D1 SP3-P3W-AT1 SP3-P3W-D1 $102.30 $102.30 $122.10 $122.10 $143.00 $143.00 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger MSRP Product Description
Noise Cancelling Surveillance Kits: SP3-P2W-AT1-NC SP3-P2W-D1-NC $135.30 $135.30 2-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 2-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger
Listen Only Surveillance Kits: SP3-PLO-AT1 SP3-PLO-D1 Speaker Mics: SP3-PRSM-HD1 SP3-PRSM-HD2-NC Headsets: SP3-PBH-1 SP3-POH-2 $85.80 $85.80 Behind the head single muff headset Over the head, OEM style metal headband, single muff headset $78.10 $89.10 Heavy Duty Remote Speaker Mic w/3.5mm accessory jac Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic $60.50 $60.50 1-Wire Listen Only with QD Acoustic Tube 1-Wire Listen Only with D-shape Ear Hanger

Part Number Surveillance Kits: VY1A-P1W-AT1 VY1A-P1W-D1 VY1A-P2W-AT1 VY1A-P2W-D1 VY1A-P3W-AT1 VY1A-P3W-D1 $82.50 $82.50 $102.30 $102.30 $118.80 $118.80 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger MSRP Product Description
Noise Cancelling Surveillance Kits: VY1A-P2W-AT1-NC VY1A-P2W-D1-NC $115.50 $115.50 2-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 2-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger
Listen Only Surveillance Kits: VY1A-PLO-AT1 VY1A-PLO-D1 Speaker Mics: VY1A-PRSM-HD1 VY1A-PRSM-HD2-NC VY1A-PRSM-HD3 VY1A-PRSM-HD4 Headsets: VY1A-PBH-1 VY1A-POH-2 Bone Induction Mics: VY1A-PBM-1 $102.30 Bone Induction Mic $71.50 $71.50 Behind the head single muff headset Over the head, OEM style metal headband, single muff headset $63.80 $74.80 $70.40 $92.40 Heavy Duty Remote Speaker Mic w/3.5mm accessory jac Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic Speaker Mic w/ 3.5mm jack Heavy Duty Speaker Mic w/ 3.5mm jac and tough polycarbonate casing $52.80 $52.80 1-Wire Listen Only with QD Acoustic Tube 1-Wire Listen Only with D-shape Ear Hanger
Part Number MSRP Product Description Surveillance Kits (please choose ear options below): VY1A-G1W VY1A-G2W Interchangeable Ear Options: AT4 AT2 D1 D2 EH1 EB1 MLS1 AT6 EH1VC EH2 EH3 EH4 $33.00 $33.00 $33.00 $15.50 $17.75 $6.75 $21.00 $17.75 $22.00 $17.75 $17.75 $26.50 High output "tubular" style transducer with clear acoustic tube & ear bud Quick disconnect acoustic tube and ear bud Adjustable rubber D-shaped ear hanger Flexible rubber fixed D-shaped ear hanger Rubber ear hanger and ear bud Walkman style ear bud Mini shoulder/lapel speaker with clip Basic acoustic tube Rubber ear hanger and ear bud with inline volume control Rubber hook and adjustable ear bud Rubber ear hanger with ear pad Ear hook with direct in-ear bud $20.90 $38.50 1-Wire Surveillance kit w/inline FULL SIZE PTT 2-Wire Surveillance Kit w/inline FULL SIZE PTT
Part Number Surveillance Kits: VY1A-S1W-AT3 VY1A-S1W-EB1 VY1A-S1W-EH1 $24.20 $16.50 $19.Wire Surveillance Kit with screw-in surgical acoustic tube 1 Wire Surveillance Kit with foam covered walkman style ear bud 1 Wire Surveillance Kit with flexible rubber ear hook with foam covered adjustable ear bud MSRP Product Description

Page 33

Vertex (VY2):
Vertex: MH-360M, MH-450M, MH-50A7A, VH-110, VH115M, VH-120, VH-130, VH-215M, VH-225M, VX600, VX800, VX900, VX530, VX537
Part Number Surveillance Kits: VY2-P1W-AT1 VY2-P1W-D1 VY2-P2W-AT1 VY2-P2W-D1 VY2-P3W-AT1 VY2-P3W-D1 $102.30 $102.30 $122.10 $122.10 $135.30 $135.30 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger MSRP Product Description

Noise Cancelling Surveillance Kits: VY2-P2W-AT1-NC VY2-P2W-D1-NC $135.30 $135.30 2-Wire Noise Cancelling Surveillance Kit with QD Acoustic Tube 2-Wire Noise Cancelling Surveillance Kit with D-shape Ear Hanger
Listen Only Surveillance Kits: VY2-PLO-AT1 VY2-PLO-D1 Speaker Mics: VY2-PRSM-HD2-NC Headsets: VY2-POH-2 $85.80 Over the head, OEM style metal headband, single muff headset $89.10 Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic $60.50 $60.50 1-Wire Listen Only with QD Acoustic Tube 1-Wire Listen Only with D-shape Ear Hanger

Page 34

Vertex (VY3):
Vertex: VX820, VX821, VX824, VX829, VX920 VX921, VX924, VX929, VX871, VX874, VX879, VX971, VX974, VX979
Part Number Surveillance Kits: VY3-P1W-AT1 VY3-P1W-D1 VY3-P2W-AT1 VY3-P2W-D1 VY3-P3W-AT1 VY3-P3W-D1 Speaker Mics: VY3-PRSM-HD2-NC $89.10 Heavy Duty Speaker Mic w/ 3.5mm jac and background noise cancelling mic $102.30 $102.30 $122.10 $122.10 $135.30 $135.30 1-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 1-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger MSRP Product Description

Page 35

Vertex (VY4):
Vertex: VX500, VX510, VX520
Part Number Surveillance Kits: VY4-P2W-AT1 VY4-P2W-D1 VY4-P3W-AT1 VY4-P3W-D1 $122.10 $122.10 $135.30 $135.30 2-Wire Surveillance Kit with full size PTT with QD Acoustic Tube 2-Wire Surveillance Kit with full size PTT with D-shape Ear Hanger 3-Wire Surveillance Kit with silent barrel PTT with QD Acoustic Tube 3-Wire Surveillance Kit with silent barrel PTT with D-shape Ear Hanger MSRP Product Description

Page 36

Adapters
Part Number MSRP Product Description Quick Disconnect (M7) Adapters: K1-ADP-M7 K2-AD-M7 I5-ADP-M7 VY1-ADP-M7 VY1A-ADP-M7 M5-AD-M7 VY2-ADP-M7 M2-AD-M7 VY3-AD-M7 M3-ADP-M7 MC1-AD-M7 MC2-AD-M7 M11-AD-M7 M6-AD-M7 $30.00 $50.00 $50.00 $30.00 $30.00 $50.00 $50.00 $50.00 $50.00 $50.00 $50.00 $50.00 $50.00 $50.00 Converts a 6-pin QD connector (M7) for use on Kenwood K1 radio models Converts a 6-pin QD connector (M7) for use on Kenwood K2 radio models Converts a 6-pin QD connector (M7) for use on Icom I5 radio models Converts a 6-pin QD connector (M7) for use on Vertex VY1 (single radio mounting screw) radio models Converts a 6-pin QD connector (M7) for use on Vertex VY1A (2 radio mounting screws) radio models Converts a 6-pin QD connector (M7) for use on Motorola M5 radio models Converts a 6-pin QD connector (M7) for use on Vertex VY2 radio models Converts a 6-pin QD connector (M7) for use on Motorola M2 radio models Converts a 6-pin QD connector (M7) for use on Vertex VY3 radio models Converts a 6-pin QD connector (M7) for use on Motorola M3 radio models Converts a 6-pin QD connector (M7) for use on M/A Com LPE200 and series radios Converts a 6-pin QD connector (M7) for use on M/A Com P7100 and series radios Converts a 6-pin QD connector (M7) for use on Motorola TRBO radios Converts a 6-pin QD connector (M7) for use on Motorola 3.5mm threaded connector radios

Quick Disconnect Assembly Parts: RC-1 RCA-1 ACA-1 WE-1 $15.50 $6.00 $21.00 $30.50 Black transducer for QD setup QD adapter part with clothing clip (w/o transducer/ear bud/tube) QD adapter part with clothing clip, QD tube/ear bud (no transd.) Quick Disconnect Entire setup
Acoustic Tube/Ear Insert Combos: QDAT-MEI-1 QDAT-MEI-5 QDAT-MEI-50 Speaker Mic Clips: RSMC-1 $0.00 Replacement swivel speaker mic clips for PRSM-HD2 and PRSM-HD3 models Please call for pricing and availability $20.35 $93.50 $907.50 Clear QD acoustic tube w/elbow and molded gel ear insert - Package size: 1 Clear QD acoustic tube w/elbow and molded gel ear insert - Package size: 5 Clear QD acoustic tube w/elbow and molded gel ear insert - Package size: 50
Ear Piece & Mic Hygenic Foam Covers: PHEP-1 PHBC-1 PHBC-2 PHBC-3 $2.40 $1.70 $1.70 $1.70 Replacement hygienic foam ear pad for PBH-1/POH-1 Replacement hygienic foam boom mic cover for POH-1 Replacement hygienic foam boom mic cover for PBH-1 Replacement hygienic foam boom mic cover for POH-2

Page 39

Gold Series Replacement Parts
Replacement Ear Options: (Gold Series listen only, 1&2 wire kits) AT4 AT2 D1 D2 EH1 EB1 MLS1 AT6 EH1VC EH2 EH3 EH4 $33.00 $33.00 $33.00 $15.50 $17.75 $6.75 $21.00 $17.75 $22.00 $17.75 $17.75 $26.50 High output "tubular" style transducer with clear acoustic tube & ear bud Quick disconnect acoustic tube and ear bud Adjustable rubber D-shaped ear hanger Flexible rubber fixed D-shaped ear hanger Rubber ear hanger and ear bud Walkman style ear bud Mini shoulder/lapel speaker with clip Basic acoustic tube Rubber ear hanger and ear bud with inline volume control Rubber hook and adjustable ear bud Rubber ear hanger with ear pad Ear hook with direct in-ear bud
Acoustic Tubes: (Non Quick Disconnect) AT-1 AT-5 AT-50 AT-100 AT-B-1 AT-B-5 AT-B-50 AT-B-100 ATEH-1 ATEH-5 ATEH-50 ATEH-100 $6.00 $25.00 $232.50 $410.75 $6.75 $29.00 $271.25 $488.25 $7.75 $32.75 $310.00 $565.75 Clear acoustic tube - Package size: 1 Clear acoustic tube - Package size: 5 Clear acoustic tube - Package size: 50 Clear acoustic tube - Package size: 100 Black acoustic tube - Package size: 1 Black acoustic tube - Package size: 5 Black acoustic tube - Package size: 50 Black acoustic tube - Package size: 100 Clear acoustic tube with rubber ear hook - Package size: 1 Clear acoustic tube with rubber ear hook - Package size: 5 Clear acoustic tube with rubber ear hook - Package size: 50 Clear acoustic tube with rubber ear hook - Package size: 100

Acoustic Tube/Ear Insert Combos: AT-MEI-1 AT-MEI-5 AT-MEI-50 AT-EH-MEI-1 AT-EH-MEI-5 AT-EH-MEI-50 Speaker Mic Clips: RSMC-1 $0.00 Replacement swivel speaker mic clip for GRSM-MD1 Please call for pricing and availability $18.00 $82.50 $800.00 $20.00 $92.50 $900.00 Clear acoustic tube w/elbow and molded gel ear insert - Package size: 1 Clear acoustic tube w/elbow and molded gel ear insert - Package size: 5 Clear acoustic tube w/elbow and molded gel ear insert - Package size: 50 Clear acoustic tube w/elbow, tube, soft ear hook and molded gel insert - Package size: 1 Clear acoustic tube w/elbow, tube, soft ear hook and molded gel insert - Package size: 5 Clear acoustic tube w/elbow, tube, soft ear hook and molded gel insert - Package size: 50
Ear Piece & Mic Hygenic Foam Covers: EHC-1 $0.80 Replacement hygienic foam cover for ear hook accessories (EH1)

Page 40