home | products | support | downloads | where to buy | what's new Support Service Centers Manuals Documents FAQs E-mail Support Forums Warranty Archive Troubleshooting Press Room About Icom Press Releases Help Site Map Search Engine Help
Archive: IC-M126DSC - VHF Mounted Marine Transceiver Features Reliable emergency communications. DSC class C and optional SC-101 capabilities The IC-M126DSC employs the latest in marine communications technology.DSC (digital selective calling). Class C digital selective calling allows you to transmit a distress call on channel 70, and when connected to a navigation receiver*, positioning data is sent at the same time. Also, an "all ships call" function allows you to quickly and easily contact nearby ships for less urgent communications. Moreover, when an optional UX -112 is installed, the DSC capabilities are enhanced to meet U.S. Coast Guard SC -101 specifications.(*NMEA0183 navigation equipment is required). Durable water resistant body The IC-M126DSC uses high quality rubber gaskets for all switches, controls and connectors providing water resistance you can count on in severe marine environments. Sensor distress call By connecting various sensors to the IC -M126DSC (eg. for fire, water intrusion, etc.), you can be automatically alerted to abnormal or dangerous conditions. When a sensor is triggered, an alert beep sounds after 25 seconds, if no controls or switches are activated, a DSC distress call is automatically sent on channel 70. Automatic fog horn function The IC-M126DSC includes an automatic fog horn function. Once the function is turned ON, the selected fog horn pattern automatically sounds in 100 sec. intervals until the function is turned OFF; even while operating other transceiver functions. Select one of 4 fog horn patterns depending on the requirements for the situation. In addition, the fog horn audio frequency can be selected from 200 to 850 Hz as desired. Other attractive features * All international and USA VHF marine channels plus 10 weather channels are available * Optional voice scrambler function for communication privacy) * Weather alert function * Priority and normal scans can be selected to suit your preference * Dual/tri-watch function between channel 16 and an operating channel or between channel 16, the call channel and an operating channel * 2-way hailer function. With an optional UA -1 AUDIO AMPLIFIER, your voice can be amplified with 30 W *Intercom function to communicate with a person remote from the transceiver. Intercom speakers can be placed in up to 2 locations *Antenna mismatching indicator warns of abnormal antenna condition * Low voltage indicator warns of a low battery voltage condition * 4 levels of LCD backlighting brightness * 3 levels of LCD contrast Detailed Specifications IC-M126DSC Quick Specs: VHF mounted marine transceiver RX/TX: all USA and international marine channels RX only: 10 weather channels Output power: 25 W Modes: FM Receiver sensitivity: 0.3 V (FM, 12 dB SINAD) DSC capable (optional) Back to main Archive page

GENERAL

l l l l l l l l l
Frequency Coverage: Transmit 156.025 -157.425 MHz, Receive 156.025-163.275 MHz Mode: 16K0G3E, 16K0G2B Number of Memory Channels: 24 + 1 call channel Power Supply Requirement: 13.8 V DC +/ -15% Current Drain (at 13.8 V DC): Transmit, high power 6.3 A, low power 1.7 A; Receive, standby 400 mA, max. audio output 1.5 A Frequency Stability: +/-0.0005% Usable Temperature Range: -20C to +60C; -4F to +140F Dimensions: 228(W) x 78(H) x 192(D) mm; 9.0(W) x 3.1(H) x 7.6 (D) in (projections not included) Weight: 2.4 kg; 5.3 lb.

TRANSMITTER

l l l l l
Output Power: High 25 W, Low 1 W Modulation System: Variable Reactance Phase Modulation Max. Frequency Deviation: +/ - 5 kHz Spurious Emissions: Less than -70 dB Microphone Impedance: 600 ohms

RECEIVER

Receive System: Double-conversion superheterodyne Intermediate Frequencies: 1st 21.8 MHz, 2nd 455 kHz Sensitivity: 0.3 V for 12 dB SINAD Squelch Sensitivity: 0.3 V at threshold Adjacent Channel Selectivity: -70 dB Spurious Response Rejection: -70 dB Intermodulation Rejection: -70 dB Audio Output Power: 5 W with a 4 ohms load (10 W for the hailer function) Audio Output Impedance: 4 ohms

IC-M126DSC Options

IC-HS2 HANDSET KIT (black): Provide good audibility and listening privacy. IC-HS3 HANDSET KIT (white): Provide good audibility and listening privacy. PS-66 DC-DC CONVERTER: Enables use of a 24 V boat battery. Input voltage: 19 to 32 V DC. Output voltage: 13.6 V DC. MB-33 FLUSH MOUNT: For mounting the IC -M126DSC to a panel. Available in white and black. UA-1 AUDIO AMPLIFIER: Boosts hailer output to 30 W. Can be used separately as a paging amplifier. UT-74 VOICE SCRAMBLER UNIT: Provides 128 analog voice scramble codes for private communications. UX-95 RELAY INTERFACE UNIT: Remotely controls the UA -1 power switch. UX-110 VOICE SCRAMBLER INTERFACE BOARD: Employs an SC 20-450 voice scrambler unit for digital voice scrambling. UX-112 DSC DECODER UNIT: Enhances the IC -M126DSC's DSC capability and provides reception of DSC signals.

All contents 1996-2005 Icom America Inc. The Icom logo is a registered trademark of Icom Inc. Terms of use