ICOM IC-R2 Configuration "Cheat Sheet" (page 1) Banks 1-4: 72 MHz Channels 11-60 AIR Memory Positions 0 - 10: 72 MHz Ch 50-- 49: 72 MHz Ch 11-59 Bank 0: Bank 1: Bank 2: Bank 3: Bank 4: Standard channel frequencies Single conversion imageSingle conversion image+ Double conversion image Double conversion image +
Dec 12, 2000 - Joel A. Foner Bank 5: 27 and 53 MHz AIR Memory Positions RC Channels 1-MHz 1 - - MHz 10 - 17 Bank 6: 50 MHz AIR Memory Positions RC Channels 0-MHz RC00 - RC09 Bank 7: 75 MHz GROUND
Scan Edges: 5 A/B 116-136 MHz U.S. ATC 10 A/B: 72 MHz AIR std freq range 11A/B Sng Img-, 12 A/B Sng Img+ 13 A/B Dbl Img-, 14 A/B Dbl Img+

Memory Positions 11 - 40

RC Channels 75 MHz 61 - 90
ICOM IC-R2 Configuration "Cheat Sheet" (page 2) Band Frequency Range Broadcast 0.495-1.620 MHz HF Band 1.625-29.995 MHz 50 MHz 30-107.995 MHz VHF Avionics 108-135.995 MHz 144 MHz 136-255.095 MHz 300 MHz 255.1-382.095 MHz 400 MHz 382.1-769.795 MHz 800 MHz 769.8-960.095 MHz 1200 MHz 960.1-1309.995 MHz
Dec 12, 2000 - Joel A. Foner
-Fast Scroll: Press FUNC + turn knob -Switch AM/FM/WFM: Press MODE -Switch Manual-Memory mode: Press V/M -Select Bank: Press V/M button (MR lit up), then press/hold FUNC button + turn knob -Select Memory Position: Turn knob (w MR lit up) -Scan Memory Presets: Select Bank (above), then press/hold FUNC button + VOL UP / DN -Scan Freq Band: Select Manual Mode (MR not lit), then press/hold FUNC button + VOL UP / DN -Scan Edges: Select Manual Mode (MR not lit), then press FUNC+BAND then turn knob to select edge pair (Prog 10-14) then press/hold FUNC button + VOL UP / DN -Stop Scan: Press/hold FUNC button + VOL UP/DN -Continue Scan (when signal found): Turn knob
ICOM IC-R2 Configuration "Cheat Sheet" (page 3)
Other Standard Settings Beep Enabled Menu Non-expanded Auto-Off 20 minutes Lock Normal Squelch Auto Disp Mode Frequency Dial Select 1 MHz per click (with FUNC held) Dial Speed Fast Freq Scan On Scan Pause 10 seconds (pause time on freq when signal found during a scan) Scan Resume 2 seconds (delay after signal stops before scan resumes) Monitor On (disable squelch while SQL is pressed) Backlight Auto PowerSave Auto