Reviews & Opinions
Independent and trusted. Read before buy IGO NAV N Go 8!

IGO NAV N Go 8

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (Hungarian)
IGO NAV N Go 8 GPS, size: 1.7 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

IGO NAV N Go 8About IGO NAV N Go 8
Here you can find all about IGO NAV N Go 8 like manual and other informations. For example: review.

IGO NAV N Go 8 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a IGO NAV N Go 8 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your IGO NAV N Go 8 photo ]

Video review

Nav& 39;N GO iGO 8 GPS navigation with 3D landmarks!

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 7. Page 1 of 1. Average Rating:
Tolmandary 4:45pm on Sunday, October 17th, 2010 
Satnav and MP3 player all-in-one. All-in-one Satnav unit. Does a good job in all aspects. Very smooth and fast routing. Satnav and MP3 player all-in-one. All-in-one Satnav unit. Does a good job in all aspects. Very smooth and fast routing.
mtnbikerman 12:43pm on Wednesday, September 29th, 2010 
Bright LCD display, tons of points of interest, fits in your pocket. Nice stylus included. Takes about sixty seconds to warm up.
Tony4x4 12:18am on Saturday, September 4th, 2010 
Looks very nice but not ideal for car use. Summary: Looks + Size + Menu system + Crashed.
Rune Zedeler 9:26am on Monday, May 10th, 2010 
Bright screen,clear graphics,mp3,photoviewer,video,games,and calculator capabilities sluggish start up.
jim_oflaherty_jr 12:20am on Sunday, April 25th, 2010 
I bought this one for my Armada and the size just works perfect with the truck. Big Screen Odd shaped support base
Peetrus 5:50am on Friday, April 9th, 2010 
Looking for a map update.... Good luck trying to get an updated map for this product. I loved my unit when I first bought it, the size, features, etc.
davide.peder 12:39am on Saturday, March 27th, 2010 
Pocket LOOX N100 when i first bought the Pocket LOOX N100 setting it up was a breeze, but i found it very sluggish.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Nothing happens if you tap this area of the screen. Tap this area to open the Itinerary screen with the turn by turn guidance instructions.
The following symbols appear in the Indicator strip:
The sound output of NavNGo iGO 8 is muted. The sound output of NavNGo iGO 8 is enabled. NavNGo iGO 8 records a Track log when GPS position is available. Track log recording is disabled. No TMC receiver is connected or TMC is turned off. A TMC receiver is connected and a radio station with TMC broadcast is received. There are new, unread Traffic events. A part of the route is bypassed based on Traffic events. A part of the route is mentioned in Traffic events but it has not been bypassed (for example, even the best detour would be too long) or it could not be bypassed (for example, the destination is on a congested street).
The following information can be seen in the three data fields shown on the map screen. Tap this area to open the Trip Information screen where you can select which values to be shown in these three fields. When there is no active route, these fields show the following information: current speed, compass and the current time of day.
Compass Speed information

More information

Shows the direction of your heading both when the map is automatically rotated and when the map is always facing North. There are speed values that can be shown: Current speed Speed limit on the current road

Time information

There are time values that can be shown: Current GPS time Time remaining to reach the destination Time remaining to reach the next via point Estimated arrival time at the destination Estimated arrival time at the next via point

Distance information

There are distance type values that can be shown: Distance remaining to reach the destination Distance remaining to reach the next via point Current altitude
The next area is a combined status indicator field. Tap this area to open the Quick menu (page 64).

Status for

GPS position quality
A higher number of lit bars indicates better GPS position accuracy.

Battery status

The device is running on battery power. The number of lit bars represent the remaining capacity.
The battery is being charged
The device is running on external power. The battery is being charged.

Vehicle type

The symbol displays the vehicle type used for route calculation.
2.3.5 Using the Cursor (the selected map location)
First, place the Cursor at the desired map location with one of the following options: Use the Find menu to select a location. The map returns with the selected point (the Cursor) in the middle, and the Cursor menu appears with the available options. Tap the screen and tap again to place the Cursor at the desired location. Now tap open the Cursor menu. Button to

You can perform the following actions in Simple mode: Action Creates a new route with the Cursor as the destination. The previous route (if exists) is deleted. Saves the Cursor as a Favourite destination Opens a screen with the name, address and coordinate information of the Cursor, and the list of POIs near it
The following options are available in Advanced mode only:
In the active route, uses the Cursor as the start point by replacing the current GPS position (available in Advanced mode only) Creates a new route with the Cursor as the destination. The previous route (if exists) is deleted. In the active route, uses the Cursor as a via point (an intermediate destination) preceding the destination (available in Advanced mode only) In the active route, uses the Cursor as the destination while keeping the previous destination as a via point (available in Advanced mode only) Shows the different routes calculated by the available routing methods. Choose the one that suits your needs the best (available in Advanced mode only) Marks the map with a Pin at the Cursor (available in Advanced mode only) Saves the Cursor as a POI (available in Advanced mode only) Saves the Cursor as a Road Safety Camera location (available in Advanced mode only) This button is not displayed when GPS position is not available or if you are in certain countries where Road Safety Camera warning is prohibited. Even if the button is available, you are responsible for checking whether it is legal to use this feature at your location.
2.4 NavNGo iGO 8 concepts

2.4.1 Smart Zoom

Smart Zoom provides much more than just a usual automatic zoom feature: While following a route calculated by NavNGo iGO 8: when approaching a turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction. If the next turn is at a distance, it will zoom out and lower the view angle to be flat so you can see the road in front of you. While driving without an active route in NavNGo iGO 8: Smart Zoom will zoom in if you drive slowly and zoom out when you drive at high speed.

Enabling Smart Zoom

Tap the map to let the map control buttons appear, and then tap to enable Smart Zoom.

Fine-tuning Smart Zoom

Tap the map to let the map control buttons appear, and then tap and hold Zoom Settings window. Modify the zoom limits of Smart Zoom if necessary. to open the Smart

2.4.2 Position markers

2.4.2.1 Current GPS position and Lock-on-Road
When your GPS position is available, NavNGo iGO 8 marks your current position with the on the map. icon
The exact location of the position marker depends on the vehicle type used for route calculation. The vehicle type can be selected in Route settings (page 78) or in the Quick Menu (page 64). If you choose pedestrian: The icon shows your actual heading. icon is at your exact GPS position. The direction of the

icon may not show your exact GPS position and If you choose any of the vehicles: The heading. If roads are near, it is aligned to the nearest road to suppress GPS position errors, and the direction of the icon is aligned to the direction of the road. The Position menu appears and you can save the GPS
To use the current GPS position, tap position as one of the following: a Favourite a Road Safety Camera a POI a map marker Pin
2.4.2.2 Returning to normal navigation
When GPS position is available, and you have moved the map (the icon is moving or is not
even visible), or you have rotated the map, the button appears. Tap it to move the map back to the GPS position and re-enable automatic map rotation. Note! Even if you move the map while you are driving, NavNGo iGO 8 continues navigating if there is an active route: it plays the voice instructions and displays the turn preview icons according to your current GPS position.
2.4.2.3 Selected location (Cursor)
If you select a location in the Find menu, or you tap the map when the map control buttons are visible, the Cursor appears at the selected point on the map. NavNGo iGO 8 displays the Cursor with a radiating red dot ( 3D map view. ) to make it visible at all zoom levels, even when it is in the background of a
When the Cursor is set, tap the following: the start point of a route a via point in a route the destination of a route
. The Cursor menu appears and you can use the Cursor as one of
You can also search for POIs around the Cursor. Or you can save the location of the Cursor as: a Favourite a Road Safety Camera a POI a map marker Pin
2.4.2.4 Original position in the Cursor menu
When the Cursor menu is open, a special icon ( opened with. ) shows the Cursor position the menu was
You can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor ( ) appears, and the buttons of the Cursor menu initiate actions for this new location. The map jumps back to the position with which the

The procedure is explained starting from the Navigation menu. 1. 2. Tap the following buttons: (Simple mode), or , (Advanced mode).
By default, NavNGo iGO 8 proposes the country and settlement where you are. If needed, tap the button with the name of the country, and select a different one from the list.
By default, NavNGo iGO 8 proposes the country, state and settlement where you are. If needed, tap the button with the name of the country, and select a different one from the list. If you select a new country, you also need to select the state, or tap a settlement regardless of the state it is in. to search for
If needed, change the settlement: To select the settlement from the list of recently used ones, tap the To enter a new settlement: 1. Tap the button with the name of the settlement, or if you have changed the country/state, tap 2. 3. Get to the list of search results: After entering a couple of characters, the names that match the string appear in a list. Tap automatically. to open the list of results before it appears. button.
Start entering the settlement name on the keyboard.

4. 5.

Select the settlement from the list.
Enter the street name: 1. 2. 3. Tap Get to the list of results: After entering a couple of characters, the names that match the string appear in a list. Tap automatically. to open the list of results before it appears.
Start entering the street name on the keyboard.

4. 6.

Select the street from the list.
Enter the house number: 1. 2. Tap. and ).
Enter the house number on the keyboard. (To enter letters, tap select an alphabetic keyboard layout. To enter symbols, tap
to finish entering the address.

(Simple

3.1.2.2 Entering an address if house numbering is restarted
There are long roads where house numbering is restarted at some point. This way the same house number can appear twice or even more times on the same road. If this is the case, after entering the house number, you need to select the appropriate address by the district/suburb information. The procedure is explained starting from the Navigation menu. 1. 2. Tap the following buttons: (Simple mode), or , (Advanced mode).
By default, NavNGo iGO 8 proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list. If needed, change the settlement: To select the settlement from the list of recently used ones, tap the To enter a new settlement: 1. Tap the button with the name of the settlement, or if you have changed the country/state, tap 2. 3. Get to the list of search results: After entering a couple of characters, the names that match the string appear in a list. Tap automatically. to open the list of results before it appears. button.

4. 4.

3. 6. 7.
A list appears with the matching addresses. Tap the desired one. The map appears with the selected point in the middle. Tap (Simple
3.1.2.3 Entering an address without knowing the district/suburb
Long roads can run across several districts or suburbs. You may not know what particular house number is located where. In this case, follow the instructions below: The procedure is explained starting from the Navigation menu. 1. 2. Tap the following buttons: (Simple mode), or , (Advanced mode).
Instead of selecting one of the streets, tap
3.1.2.4 Selecting an intersection as the destination
By default, NavNGo iGO 8 proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list. If needed, change the settlement: To select the settlement from the list of recently used ones, tap the To enter a new settlement: button.
Tap the button with the name of the settlement, or if you have changed the country/state, tap.
Start entering the settlement name on the keyboard. Get to the list of search results: After entering a couple of characters, the names that match the string appear in a list. Tap automatically. to open the list of results before it appears
Select the street from the list. button.

Tap the

If only a few intersecting streets exist, their list appears immediately. In case of a longer street, a keyboard screen appears. Start entering the name of the intersecting street on the keyboard. As you type, if the matching streets can be shown on one screen, their list appears automatically.
Tap the desired intersecting street in the list. The map appears with the selected point in the middle. Tap (Simple
3.1.2.5 Selecting a city centre as the destination
The City Centre is not the geometric centre of the settlement but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is an important intersection. The procedure is explained starting from the Navigation menu. 1. Tap the following buttons: (Simple mode), or , (Advanced mode).

4. 4. 5. Tap the

Select the settlement from the list. button. (Simple
3.1.2.6 Entering an address with a postal code
All of the above address searching possibilities can be performed with entering the postal code instead of the settlement name. Find below an example with a full address: The procedure is explained starting from the Navigation menu. 1. 2. Tap the following buttons: (Simple mode), or , (Advanced mode).

By default, NavNGo iGO 8 proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list. Tap the button with the name of the settlement, and enter the postal code: 1. 2. Start entering the postal code on the keyboard. Get to the list of results: After entering a couple of numbers, matching results appear in a list. Tap automatically. to open the list of results before it appears
Pick the settlement from the list.
to finish entering the address. (Simple
3.1.2.7 Tips on entering addresses quickly
When you are entering the name of a settlement or a street, NavNGo iGO 8 only displays those characters that appear in possible search results. The other characters are greyed out. button When entering the settlement name or the street name, tap the after a couple of letters; NavNGo iGO 8 lists the items that contain the specified letters. You can speed up finding an intersection: Search first for the street with a less common or less usual name; fewer letters are enough to find it. If one of the streets is shorter, search for that one first. You can then find the second one faster.
You can search for both the type and the name of a road. If the same word appears in several names, for example in the name of streets, roads and avenues, you can obtain the result faster if you enter the first letter of the street type: For example, enter Pi A to obtain Pine Avenue and skip all Pine Streets and Pickwick Roads.
You can also search in postal codes. This is useful when a street name is common and it is used in several districts of a city.
3.1.3 Selecting the destination from your Favourites
You can select a location that you have already saved as a Favourite to be your destination. The procedure is explained starting from the Navigation menu. 1. 2. 3. Tap the following buttons: mode). (Simple mode) or , (Advanced
Tap the Favourite that you want to set as your destination. The map appears with the selected point in the middle. Tap (Simple
3.1.4 Selecting the destination from the POIs
You can select your destination from the POIs included with NavNGo iGO 8 or from the ones you have previously created. The procedure is explained starting from the Navigation menu. 1. 2. Tap the following buttons: (Simple mode), or , (Advanced mode).
Select the area around which the POI should be searched for: : The POI will be searched for around a given address. : The map appears with the Cursor in the middle. Modify the location of the Cursor if necessary, then tap given location. . The POI will be searched for around the
: The POI will be searched for around the current GPS position. : The POI will be searched for around the destination of the active route. : The POI will be searched for not around a given point, but by the size of the detour it adds to the active route. This can be useful if you search for a later stopover that causes only a minimal detour, for example upcoming petrol stations or restaurants.

If you insert a via point in a route that is already a multi-point route, you will automatically be taken to the Edit Route screen where you can determine the position of the intermediate route point. When you enter the screen, the new via point is placed as the first via point to be reached. The new point is the highlighted point in the list. You have the following options:
The selected point moves up in the list (becomes a via point to be reached earlier). Tap this button repeatedly, and the point becomes the start point of the route (when routing from a given location) or the first via point to reach (when routing from the GPS position). The selected point moves down in the list (becomes a via point to be reached later). Tap this button repeatedly, and the point becomes the final destination of the route. Tap this button to reverse the route. The start point becomes the destination, the destination becomes the start point, and all via points are to be reached in the opposite order than before. Tap this button to optimise the route. The start point and the destination remain at their position, but the via points are reordered to make the shortest possible route. Tap this button to remove the selected point from the route. The route remains as it was before adding the new point.
Every time a new point is added, the route is recalculated automatically, and you can start navigating right away.
3.3 Creating a multi-point route (appending a new destination)
destination Multi-point routes are created from simple routes, so a route must be active first. One of the ways of expanding the route is to add a new destination. The previous destination becomes the last via point of the route. This feature is available in Advanced mode only. 1. 2. Select a new location as you did in the previous sections. This will be the additional destination in the route. The map appears with the selected point in the middle, and the Cursor menu opens automatically.

3. 4. 5.

to open the full Cursor menu with the additional functions.
Tap to add the point as a new final destination demoting the previous one to the last intermediate destination. [optional] To add more points to the route, repeat the above steps as many times as you like.

4.1.3 Detour menu

This screen contains quick detour possibilities during navigation. It can be opened directly from the Map screen by tapping .
You have the following options: On the main part of the screen you can see the first page of Saved Search Criteria. Select any of the criteria to quickly receive the list of nearest matching POIs, and instantly plan a new route to the desired one, or insert it as a via point in your active route. In Advanced mode more buttons appear at the bottom: : If you want to bypass a part of the route starting from the next intersection, tap this button, and select a distance to bypass. : If you have used the above function before, tap this button to clear the restrictions from the map.

4.1.4 Cursor menu

As soon as you select one point in the Find menu, the map appears with the Cursor menu, a menu with possible actions for the selected point. Alternatively when you tap the map, control buttons appear. Tap again to place the Cursor, a radiating red dot. Now tap Button , and the Cursor menu opens with a list of options. Description Closes the Cursor menu, and returns to the previous screen. Zooms out the map. Zooms in the map. With the Cursor menu open, you can still move or scale the map, and tap the map anywhere to place the Cursor to a new location, but when you use this button, the Cursor jumps back to the place where it was at the time when you opened the Cursor menu. Displayed at the Cursor if it is at the same location with which the Cursor menu was opened. Displayed at the Cursor if it has been relocated since the Cursor menu was opened. Creates a new route with the Cursor as the destination. The previous route (if exists) is deleted. The location of the Cursor is added to the list of frequently visited destinations, the so called Favourites. You can give a name for the Favourite. Opens a new screen with the address and coordinate of the Cursor, and the list of nearby POIs.
You can perform the following actions in Simple mode:
Creates a new route with the Cursor as the destination. The previous route (if exists) is deleted. If the Cursor is at or near the destination, this button replaces the previous one, and deletes the current destination from the route. The last via point is promoted as destination, or if there are no via points, the route is deleted. The Cursor is added to the active route as an intermediate route point, a point to be reached before the destination. If there is already a via point in the route, the Edit Route screen opens to let you decide where the new via point is to appear in the route. If the Cursor is at or near one of the via points, this button replaces the previous one, and deletes the selected via point from the route. The route is recalculated without the deleted point. Map locations can be marked with Pins. Unlike POIs, a Pin has no name and other details, only a colour to let you tell one from another on the map. If the Cursor is at or near a Pin, this button replaces the previous one, and deletes the Pin the Cursor is near to. Opens the full-screen Cursor menu with all the possible options. The Cursor is appended at the end of the route as the new destination. The previous destination is demoted, and becomes the last via point.

This button is similar to the button, but a new screen opens, and the route is calculated with all the possible route calculation methods (Fast, Short, Economical and Easy). Observe the results, and choose one of the routes to navigate. The Cursor becomes the start point of the route. This means that the route is not started from the current GPS position, and Automatic Off-route Recalculation needs to be turned off to keep the selected point as the start point. If the Cursor is at or near the selected start point, this button replaces the previous one and deletes the start point from the route. The current GPS position is used again as the start point, and Automatic Off-route Recalculation is re-enabled. The Cursor is saved as a user POI. Select the POI group and give a name for the POI, then select a suitable icon, enter a phone number, and additional information if you like. The Cursor is saved as the location of a Road Safety Camera (speed camera or red light camera). A new screen appears where you can set the type of the camera, the direction of the measured traffic, and the speed limit checked for (if applicable). This button is not displayed when GPS position is not available or if you are in certain countries where Road Safety Camera warning is prohibited. Even if the button is available, you are responsible for checking whether it is legal to use this feature at your location. If the Cursor is at or near a Road Safety Camera, this button replaces the previous one, and opens a new screen where you can edit the details of the camera.

4.1.5 Position menu

When you follow the recommended route on the map (the Cursor is the current GPS position), the Position menu replaces the Cursor menu. It does not contain buttons that modify the current route, as the GPS position is not useful as a route point. To open the Position menu, tap.
4.1.6 Route Information screen
The Route Information screen has all the data and some of the functions you need while you navigate. There are two ways to open this screen: It can be opened directly from the Map screen by tapping the Turn Preview field ( In Advanced mode, from the Navigation menu tap the following buttons: , ).
In the top section of the screen you see information about the current route. The fields on this screen are continuously updated while you keep the screen open. When you open the screen, all fields contain information about reaching your final destination. Tap any of the fields to see data on the via points starting from the first one through the final destination again. You have the following data and functions on this screen:

This value is not shown on the map screen.
This value appears on the map screen in the Trip Data area. This is the value at the top. This value appears on the map screen in the Trip Data area. This is the value in the middle. This value appears on the map screen in the Trip Data area. This is the value at the bottom.
4.1.7.1 Trip Computer screen
The Trip Computer screen provides collected trip data. It can be opened from the Trip Information screen by tapping.
The fields on this screen are continuously updated while you keep the screen open. You can switch between the trips, pause then resume them, or reset their data. You have the following functions on this screen:
Pauses the trip currently shown on the screen. Values on the screen stop changing. This button replaces the previous one if it has been activated. Tap it to resume collecting trip data. Resets all counters of the currently shown trip. Collecting trip data is restarted only when NavNGo iGO 8 receives a position from the GPS. Cycles through all trips.

4.1.8 Quick menu

The Quick menu is a selection of controls that are frequently needed during navigation. It can be
opened directly from the Map screen by tapping
If you tap any of the switches in the Quick menu except for the Vehicle type, the Map screen immediately returns. A switch is on if its lamp is lit. The Vehicle type button is different. It is a multivalue button. It opens a list of available choices, and the symbol of the selected vehicle is shown on the button.

Master Volume slider

Main function (single tap)

Function (tap and hold)

Adjusts the sound volume of the device. All n/a sounds of the application are affected. If you only adjust the volume, you need to Opens the Navigation menu. use this button to return to the Map screen. Mutes all sounds of NavNGo iGO 8. Opens Sound settings.
Opens Colour Profiles settings. Switches between the daytime and night colour schemes manually. This will not disable the automatic switching between the two schemes: the other colour scheme returns at the next scheduled time. 3D buildings can be displayed on the map. Use this switch to suppress them temporarily. Opens 3D Settings.
Tap this button and select the Vehicle type Opens Route Planning options. to be used for route calculation. Otherwise it is selected in Route Planning options in Settings (page 78). Changing the Vehicle type triggers an automatic route recalculation. Turns track log recording on or off otherwise Opens Manage Track Logs. controlled on the Manage Track Logs screen. Opens the GPS Data screen with satellite n/a information, data coming from the GPS receiver, and a shortcut to the GPS Settings screen if needed (GPS receiver detection is automatic). When a TMC receiver is connected to n/a NavNGo iGO 8, this button opens the list of TMC messages, and provides access to the TMC Settings and the radio station settings screens.

4.1.9 TMC Events screen

You can access the list of TMC events, change TMC related settings, and select or ignore specific
The list of current TMC events is displayed first, ordered by their distance from your current position. To change the content or the list or the sequence of the list items, tap :
Sort Events by Event List
Sort the list of TMC events in the following ways: Distance: The list is ordered by the distance of the TMC event in a straight line from your current GPS position. Road Name: The list is ordered by the name of the road concerned by the TMC event. Type: The list is ordered by the type of the TMC event.
The content of the TMC event list can be filtered: All Events: All TMC events received by NavNGo iGO 8 appear in the list. On Route: Only TMC events concerning a part of your active route appear in the list.
To check the currently received FM radio station, to exclude radio stations or to manually tune to a radio station, tap :

Use Auto-tuner

If Auto-tuner is enabled, the tuner of NavNGo iGO 8 sweeps through the FM CCIR radio band searching for a TMC signal. The first station with TMC data will be used automatically. When no TMC signal is available, the tuner keeps on searching. Turn off Auto-tuner to select a radio station manually. When Auto-tuner is turned off, search for the desired radio station manually with these buttons. Push this button to put the currently received FM radio station on an exception list, and make NavNGo iGO 8 search for another station instead.

, Exclude This Station

Show Excluded Stations This button opens the list of radio stations previously excluded. You can reenable any or all of the excluded stations.

4.1.10 GPS Data screen

Tap the following buttons: , and then GPS Data screen and to see the status of GPS reception.

to open the

Colour
GPS position quality indicator
NavNGo iGO 8 has a connection to the GPS receiver and GPS position information is available in 3D: NavNGo iGO 8 can calculate both your horizontal and vertical GPS position. NavNGo iGO 8 has a connection to the GPS receiver and GPS position information is available in 2D: only the horizontal position is calculated, NavNGo iGO 8 cannot calculate your vertical GPS position. NavNGo iGO 8 has a connection to the GPS receiver but GPS position information is not available. NavNGo iGO 8 has no connection to the GPS receiver.

Yellow

Red Green, blinking Yellow, blinking
GPS connection quality indicator NavNGo iGO 8 is connected to the GPS receiver. NavNGo iGO 8 has no connection to the GPS receiver but it is still trying to establish a connection. NavNGo iGO 8 has no connection to the GPS receiver and is not trying to establish a connection. The virtual sky shows the visible part of the sky above you, with your position as the centre. The satellites are shown at their current positions. The GPS receives data from both the green

Road Types Used for Route Planning

Route Calculation Method

You can choose from different route types. The routing method can be changed temporarily while creating the route: when the destination is selected, tap in the Cursor menu.
Use Traffic Information Recalculate to Avoid Traffic
When TMC messages are received, this setting tells NavNGo iGO 8 whether to use that information in route planning. This setting determines how NavNGo iGO 8 uses the received TMC information in route recalculation: Automatic: When route recalculation becomes necessary based on the received TMC events, NavNGo iGO 8 recalculates the route automatically. Manual: When route recalculation becomes necessary based on the received TMC events, NavNGo iGO 8 notifies you, but you can decide whether to recalculate the route or not. Disabled: TMC events are only taken account when the route is recalculated in an off-route situation.

Vehicle types:

Car Taxi Bus Emergency vehicles Bicycle Pedestrian
Road Types Used for Route Planning: Type
Motorways Unpaved roads Per-use Toll
You might need to avoid motorways when you are driving a slow car or you are towing another vehicle. NavNGo iGO 8 excludes unpaved roads by default: unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them. By default NavNGo iGO 8 includes toll roads (pay roads where there is a per-use charge) in the routes. If you disable toll roads, NavNGo iGO 8 plans the best toll-free route. Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time. They can be enabled or disabled separately from toll roads. You might need a permit or permission from the owners to use certain roads or to enter certain areas. NavNGo iGO 8 excludes these roads from the route calculation by default.

Period Charge

Permit needed

Ferries

NavNGo iGO 8 includes ferries in a planned route by default. However, a map does not necessarily contain information about the accessibility of temporary ferries. You might also need to pay a fare on ferries. In some cases the route calculated according to your other navigation and route preferences would lead through another country. If you wish to always stay within the same country, turn this option off.

Cross-border planning

Route Calculation Method types: Option

Fast Short

Gives the quickest possible route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. Gives a route that has the smallest total distance of all possible routes between the route points. Usually practical for pedestrians, cyclists or slow vehicles. Combines the benefits of Fast and Short: NavNGo iGO 8 calculates as if it were calculating the Fast route, but it takes other roads as well to save fuel. Results in a route with fewer turns. With this option, you can make NavNGo iGO 8 to take, for example, the motorway instead of series of smaller roads or streets.

Track-up map orientation

In Track-up mode the map is rotated so its top always points in the current driving direction. This is the default orientation in 3D map view mode. See also: North-up map orientation.

Road Safety Camera

A special POI type for speed cameras and red light cameras. Different data sources are available, and you can also mark the position of a Road Safety Camera on the map. You can configure NavNGo iGO 8 to warn you when you approach one of these cameras. Detecting the location of Road Safety Cameras is prohibited in certain countries. It is the sole responsibility of the driver to check whether this feature can be used during the trip.
6 End User Licence Agreement
1 The contracting parties 1.1 This Agreement has been entered into by and between Nav N Go Kft. (registered seat: 23 Brc utca, H-1016 Budapest, Hungary; Company reg.no.: 01-09-891838) as Licensor (hereinafter: Licensor) and You as the User (hereinafter: User; the User and the Licensor jointly referred to as: Parties) in subject of the use of the software product specified in this Agreement. 2 Conclusion of the Agreement 2.1 The Parties hereby acknowledge that this Agreement shall be concluded by implicit conduct of the Parties without signing the Agreement. 2.2 The User hereby acknowledges that following the lawful acquisition of the software product constituting the object of this Agreement (Section 4), any degree of use, installation into a computer or other hardware, installation of such hardware into a vehicle, pressing of the Accept button displayed by the software during installation or use (hereinafter referred to as Use) shall mean that the User has accepted the terms and conditions of this Agreement as legally binding. 2.3 This Agreement shall by no means authorise use of the software product by those persons having unlawfully acquired the software product or having unlawfully installed it on a computer or in a vehicle. 3 Relevant laws and regulations 3.1 To all issues not regulated by this Agreement, the laws of the Republic of Hungary, with specific reference to Act IV of 1959 on the Civil Code and to Act LXXVI of 1999 on Copyrights shall apply. 3.2 The original language version of this Agreement is the Hungarian version. This Agreement has versions in other languages as well. In case of dispute the Hungarian version shall prevail. 4 Object of the Agreement 4.1 The object of this Agreement shall be the navigation guidance software product of Licensor (hereinafter referred to as the Software Product). 4.2 The Software Product shall include the operating computer program, its complete documentation, the map database pertaining thereto and any third-party content and services accessible through the Software Product (hereinafter: Database). 4.3 Any form of display, storage, coding, including printed, electronic or graphic display, storage, source or object code, or any other as yet undefined form of display, storage, or coding, or any medium thereof shall be deemed parts of the Software Product. 4.4 Error corrections, additions, updates used by the User following the conclusion of this Agreement shall also be deemed parts of the Software Product. 5 Rights under copyright 5.1 Unless otherwise provided by law or contractual provisions, the Licensor is the sole and exclusive owner of all material copyrights vested in the Software Product. 5.2 Copyrights extend to the whole Software Product and to its parts separately as well. 5.3 The owner(s) of the copyrights of the Database forming part of the Software Product is (are) the natural person(s) or corporate entity(ies) listed in the Appendix to this Agreement or in the About menu item of the operating computer programme (hereinafter referred to as Database Owner). The user's manual of the Software Product includes the name of the menu option where all the owners of the Database items are listed. The Licensor hereby states that it has obtained sufficient usage and representation rights from the Database owners in order to utilise the Database, to offer it for utilisation and to transfer it for utilisation as set forth in this Agreement. 5.4 Pursuant to this Agreement, all rights vested in the Software Product shall remain in the ownership of the Licensor, except for those to which the User is entitled under law or by virtue of this Agreement. 6 Rights of the User 6.1 The User is entitled to install the Software Product into one hardware device (desktop, handheld, portable computer, navigation device), and to run and use one copy of the Software Product or a preinstalled copy of the Software Product thereon.

doc1

iGO My Way and CarteBlanche launch a campaign against the distribution of pirated copies of their navigation solutions in Ukraine
Kyiv, October 13th 2010 Nav N Go Kft., the developer of popular Nav N Go iGO 8, iGO primo and iGO amigo navigation software, authorized its official distributor and manufacturer of the map of Ukraine, Carte Blanche Ukraine Ltd. to protect Nav N Go copyright on this software in Ukraine. For this purpose Carte Blanche Ukraine Ltd. appoints Pavlo Mykolyuk, a lawyer specialized in the field of intellectual property and the Director of Vindex company, as its Outside Counsel. I regard methodical support and proactive education of the police officers in the field of IPR offence recording as my top priorities. In the nearest future sample purchases of the navigation devices with stolen software will be inevitable. Internet portals distributing such software versions will be taken into account as well, Pavlo Mykolyuk says. Iryna Iekymova, the General Director of Carte Blanche Ukraine Ltd., emphasizes: Our company manufactures its own electronic maps of Ukraine and is the map material supplier for Nav N Go company. The map of Ukraine developed by our company is distributed under CarteBlanche registered trademark. Licensed iGO-based software in Ukraine is provided with technical support from our qualified staff, as well as with free map updates through the software manufacturers official website. We offer solutions for most types of navigation devices, such as PDAs and pocket PCs under Windows Mobile, a number of personal navigation devices and in-car multimedia systems under Windows CE.NET. In fact, the market legalization campaign started much earlier. At the first stage it was aimed at increasing the market awareness of the software features and customer loyalty to our products. To achieve these aims we closely cooperate with mass media and regularly participate in specialized exhibitions. What is more, during the last three years the cost of the software was substantially reduced, the detailed coverage of Ukraine was increased from 12 to 248 settlements, 12 free updates were provided to the users. However, as the navigation market is comparatively new, a large number of sellers dealing with navigation devices make use of the low customer awareness of the legal product advantages and distribute stolen software versions, depriving the users of map updates, warranty on the software and technical support and leaving the developers without a financial base for further map improvement and enhancement. Therefore, Carte Blanche Ukraine Ltd. as the map developer and Nav N Go Kft. as the software developer are forced to make the next step and start fighting with illegal distribution of our products. For the users who have unwillingly purchased illegal iGO versions we continue our loyalty program. From 21 October such users will be able to purchase the legal software for a special price in exchange of the pirated one they have.

ADDITIONAL INFORMATION:

Nav N Go
Nav N Go Kft. is one of the leading navigation solution providers for automotive and personal navigation. Nav N Go offers 3D navigation applications to device manufacturers, auto makers and OEM brands that are custom built according to each customers needs. The core technology is based on the award-winning iGO My way software engine. The company has formed partnerships with more than 70 hardware manufacturers worldwide, and its navigation software is used in more than 70 countries and in 45 different languages. To find out more about Nav N Go please visit www.navngo.com

CarteBlanche

Carte Blanche Ukraine Ltd. is a developer of an electronic map of Ukraine and the supplier of map solutions for GPS navigation in Ukraine to world and European leaders in navigation software development and automotive navigation hardware manufacturing, such as Garmin, Mio, Nav N Go, Mireo. Carte Blanche Ukraine Ltd. is the only official distributor of iGO navigation software in Ukraine. Due to cooperation with Nav N Go company, CarteBlanche map of Ukraine is included in All Europe and Eastern Europe map packages. Therefore, door-to-door navigation without boundaries, from Luhansk to Lviv and Lisbon, from Sevastopol to Chernihiv and Tallinn is already available to our users. To find out more about Carte Blanche Ukraine please visit www.gpsmap.com.ua

VINDEX

Since August 2009 the Director of Vindex company Pavlo Mykolyuk is an Outside Counsel of Adobe Systems Inc., the developer of Photoshop, Acrobat, Flash and other software, and since June 2010 he is an Outside Counsel of Graphisoft R&D, the developer of software solutions for architects and builders, in particular ArchiCAD and EcoDesigner. The focus of Vindex activity is providing legal services in the field of intellectual property rights protection in Ukraine. To find out more about Vindex please visit www.vindex.com.ua

 

Tags

Studio Mg166C 97 M Webcam IR250T AG-HMC70P 32AV625D CLX-3170FN ETS Mechanical 2004 Car-100 Samsung 920N MFC-845CW LW20M21C Opti-ECO Serial ATA Backtrack Express 121 Clipso RR-US430 X5 2003 ES-4815 ZAP 6 F90X-FR Ericsson W395 EX2220X STR-DA3300ES IRC3580-J1 Craftsman 2572 KLV-V40a10 K790I DA-40 Aekrqpn Thomson RR60 SDP-2 TS-WX22A RX-V765 Altos R700 1-1-0 CPS318 705R-serials-611000001-AND-UP ZJD125 LE37R86BD Expressionist Plus MBD102 42PFL9703D 10 Armxxf 149 Revolution Review Gz-mg57 Kw-28KW-32kw Instructions Samsung C180 37AM-23H 28PW5407 Monitor Mpro120 42PFL3603D Seiko 4F32 Minitower PC Omnibot 2000 TH-42PV70FA YFZ450-2005 Bonneville 1995 GT4-15 Stereo MF8170C 9309 TS PRO MPA Valencia MP36 Icarus 2020 Power SC-D364 BDZ-X90 HTS3357-12 Temporis 700 CP720 Switcher VGN-AR41L AX-390 Standalone Device VP-9000 Thinkpad T22 Xd900DG 103FH 26LG3050-ZA GT-7000U MXB-2250 IC 2725 650-PS PS42A456p2D MX-5000 DSC-T700 H BAR206A 370 BW Cappucino Ring M1800R RL-JA20 PS-42C7S GLC2500 XJR1300-2001

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101