Washer-dryer
Instructions for installation and use

Quick guide

Here are the 13 topics explained in this manual. Read, learn and have fun: you will discover many secret ways to get a better wash, more easily and making your washer-dryer last longer.
1. Installation and removal (p. 11)
Installation, after delivery or transport, is the most important operation for the correct functioning of your washer-dryer. Always check: 1. That the electric system conforms to regulations; 2. That the inlet and draining pipes are connected correctly. Never use pipes that have already been used. 3. That the washer-dryer is levelled properly; something worth checking to aid the performance of your washer-dryer; 4. That the drum's fixing screws have been removed from the back of the washer-dryer;

2. 3. 4.

What goes in your washer-dryer and how to start it (p. 2)

8. How to dry (p. 5)

A few handy tips to get the best drying cycle from your appliance.
A correct distribution of your laundry is vital to the successful outcome of the wash and the life of the washer-dryer. Learn all the tips and secrets to dividing your linen: colour, type of fabric.
9. Care and maintenance (p. 13)
With just a bit of care, it will repay you with loyalty and devotion. With the necessary upkeep, it will wash for years and years to come.
Guide to understanding labels (p. 6)
The symbols on the labels of your garments are easy to understand and equally important for the success of your wash. The guide includes simple instructions to help you choose the right temperature, wash cycles and ironing methods.
10. Problems and solutions (p. 9 and 10)
Before calling a technician, read these pages: immediate solutions may be found for a number of problems. If the problem persists, call your local Indesit customer services who will be pleased to help. Any failure will be repaired, as soon as possible.
Useful tips to avoid mistakes (p. 7)
Years back, our grandmothers were the ones who gave us good advice - and in those days synthetic fibres did not exist: washing was easy. Today, your washer-dryer offers you helpful advice allowing you to wash wool even better than an expert laundress would by hand.
Technical characteristics (p. 10)
The detergent dispenser (p. 8)
Herein are the technical features of your washer-dryer: model type number, electric and water specifications, size, capacity, speed of the spin cycle and compliance with Italian and European regulations.
How to use the detergent dispenser.
12. Safety for you and your family (p. 14)
Here you will find the necessary safety guidelines, and it is important for you to read this section carefully.
Understanding the control panel (p. 3)
Washer-dryers control panel is very simple. It has only a few essential buttons to help you choose any type of wash cycle, ranging from the most energetic, capable of cleaning a mechanics overalls, to the most delicate for wool. Familiarising yourself with it will help you get the best out of your wash while helping your washer-dryer last longer. Its easy.
Indesit stays with you after your purchase (p. 15)
Indesit supports its products after their purchase by offering you a range of special services, professional assistance, spare parts and quality accessories.
7. Guide to the wash programmes (p. 4)
Herein is an easy table to help you choose the right programme, temperature, detergents and possible additives. Choose the right programme and you will get better results with your wash while saving time, water and energy, day after day.

Always disconnect electricity at the socket and turn off the water supply. Remember that, in the event of a power failure, or should the washer-dryer switch itself off, the programme chosen will remain in its memory.
How to eliminate the most common stains
Ink and biro Dab with a wad of cotton soaked in methyl alcohol or alcohol at 90. Tar Dab with fresh butter, rub in turpentine then wash immediately. Wax Scrape away, then run a hot iron between two sheets of absorbent paper. Then rub in cotton with turpentine or methyl alcohol. Chewing gum Rub in nail polish remover and wipe with a clean rag. Mold Cotton and white linen should be placed in a solution of 5 parts water, one bleach and a spoon of vinegar, then washed immediately. For other white fabrics, use hydrogen peroxide at 10 volumes and wash immediately. Lipstick Dab with ether on wool or cotton. Use tricloroetilene for silk. Nail polish Place a sheet of absorbent paper on the side of the stain, wet it with nail polish remover, shifting the garment as the sheet gradually changes colour. Grass Dab with a wad of cotton soaked in methyl alcohol.
Instructions for installation and use 2
Understanding the control panel

Here Im in command

Making the right choice is important. And its easy.
Programme selector knob Use this knob to select the wash programme. Turn this knob clockwise only. To select a programme, you should turn the knob so that the symbol/number of the desired programme is in line with the pointer on the knob. Now press on/off button G (position I), pilot lamp H will start flashing. After 5", the setting will be accepted, pilot lamp H will stop flashing (staying lit) and the wash cycle will begin. Should you wish to interrupt the programme in progress or set a new one, select one of the symbols (Stop/Reset) and wait 5" : when the cancellation has been accepted, pilot lamp H flashes, and you can then turn the appliance off. After the wash cycle has been set and accepted by the washing machine, turning the knob will have no effect (except for when it is on position Stop/Reset).
Drying cycle knob Use this knob to select the desired dr ying cycle. Two options are available: A - Based on time: From 40 minutes to 150. B - Based on the damp level of the dry clothes: Iron :use this slightly damp setting for clothes that you intend to iron to reduce effort and save energy in the drying cycle. Wardrobe : use this setting when you want dry clothes that can be stored after hanging for a short while. Extra dry : use this setting when you want very dry clothes. A cooling stage is foreseen at the end of the drying cycle.

Detergent dispenser It is divided into three compartments: 1. Detergent for pre-wash; 2. Detergent for the main cycle wash; 3. Fabric conditioner.
Anti-crease This button allows you to interrupt a programme (on symbol ) keeping the washing soaking in water before the spin cycle. It is a very useful button in particular because it can be used for delicates and synthetics. It is only to be used with wash programmes for synthetic fabrics, silk and curtains when it is impossible for you to take the washing out immediately. Before opening the washing machine door, finish the wash cycle as follows: Silk and curtains: press button D and the machine will drain the water. Synthetic fabrics: press button D if you want a spin cycle, or turn if you want knob A to symbol the water to be drained. N.B.: With Daily wash, this function is not performed. Slow spin Use this button to reduce the spinning speed from 1000 to 500 rpm for the cotton and linen programmes and from 850 to 500 rpm for the synthetic fabrics programmes.
On-off When button G is pressed, the washer-dryer is switched on, when it is not the machine is switched off. Turning the appliance off does not cancel the selected programme.
On-off lamp / door locked Lamp H flashes slowly when the appliance is switched on and awaiting instructions and at the end of a cycle, indicating that the door can be opened. It flashes quickly when the door should not be opened. A steady light means the appliance has accepted the selected programme.
Drying cycle lamp When this lamp is on, it means that knob B has been set on a drying cycle and at the end of the wash cycle, the appliance will run the selected tumble drying cycle.
The detergent dispenser is here.
Extra Economy Reduces water consumption during the rinse cycles. We recommend that you use this function only with small laundry loads, dosing the detergent proportionally.
3 Instructions for installation and use
What are you washing today?
A programme for all seasons
Type of fabric and degree of soil Programme Detergent knob for prewash Detergent for wash Fabric softener Length of the cycle (minutes) Description of wash cycle COTTON Exceptionally soiled whites (sheets, tablecloths, etc.) Exceptionally soiled whites (sheets, tablecloths, etc.) Heavily soiled whites and fast colours Slightly soiled whites and delicate colours (shirts, jumpers, etc.) Rinse cycles Spin cycle Drying cycle for cotton fabrics Stop/Reset SYNTHETICS Heavily soiled fast colour synthetics (baby linen, etc.) Heavily soiled fast colour synthetics (baby linen, etc.) Delicate colour synthetics (all types of slightly soiled garments) Delicate colour synthetics (all types of slightly soiled garments) Rinse cycles Fabric softener Spin cycle Drying cycle for synthetic fabrics Stop/Reset DELICATES Wool Particularly delicate garments and fabrics (curtains, silk, viscose, etc.) Rinse cycles Spin cycle Draining Stop/Reset

Dry only

Once you have loaded the washing that needs drying (2,5 kg max. for cottons, see table for other fabrics ), make sure that: - the door is shut correctly; - the plug is inserted in the socket; - the water tap is turned on; - button G has not been pressed (O position). And now set the wash cycle knob Set knob A on the appropriate drying setting depending on the type of fabric, select the type of drying cycle required using knob B and then press on-off button G (I position). At the end of the drying cycle. Wait for lamp H to flash slowly, then turn the washer-dryer off by pressing on-off button G (O position). Now you can open the appliance door. Once you have removed the washing from the appliance, leave the door open or ajar to avoid the formation of bad odours and turn off the water tap.
Fabric type Load type Max. load (kg) Extra dry Cotton, Linen Clothing of different sizes Terry towels Sheets, Shirts Pyjamas, socks, etc. Slips, tights, stockings, etc.

Drying time (Min.)

Wardrobe

Cotton

Terital, Cotton Acrylics
The data contained in the table are purely indicative. For cotton loads of less than 1 Kg, use the drying programme designed for synthetic fabrics.

IMPORTANT

A spin cycle is carried out during the drying if you have set a cotton programme and a level of dryness (Extra dry , , Iron ). Wardrobe

WARNING

- During the drying phase, the door tends to get quite hot. - Do not use the appliance to dry clothes that have been washed with flammable solvents (e.g. trichlorethylene). - Do not use the appliance to dry foam rubber or similar elastomers. - Make sure that the water tap is turned on during the drying cycles. - This washer-dryer can only be used to dry clothes which have been pre-washed in water.
5 Instructions for installation and use

Understanding labels

Learn the meaning of these symbols and you will get better results, your garments will last longer resulting in an improved wash.
All over Europe, garment labels contain messages expressed in small yet important symbols. Understanding them is very important if you want to get better results and treat your garments the way they deserve to be treated. These symbols are divided in five different categories and , bleaching shapes: washing , ironing , dry cleaning and drying.

Useful tips

Turn shirts inside out to get better results and make them last longer. Always empty pockets of their contents. Look at the label: it will always give you useful advice. When loading your washing, try to have a mixture of large to small items.
Make sure you select the right temperature!
Consult and learn the symbols in this table: they will help you obtain a better wash, treat your clothes properly, and get a better performance out of your washer-dryer.
Strong action Delicate action

Bleaching

Ironing

Dry cleaning

High Temp.

Drying

Low Temperat.
Wash at 95C Bleaching only in cold water Hot iron at max 200C
Dry clean with any solvent Machine dryable
Wash at 60C Medium hot ironing at max 150C Dry clean only with perchloride, benzine av., pure alcohol, R111 and R113 Do not machine dry

Do not bleach

Wash at 40C Iron at max 110C Dry clean with av. benzine, pure alcohol and R113 Spread to dry

Wash at 30C

Not ironable

Do not dry clean

Hang to dry without spin drying
Hand wash Not washable in water

Dry on clothes hanger

Instructions for installation and use 6
Never use your washerdryer to wash. torn, fraying or non-hemmed linen. If it is absolutely neccessary, place it in a bag for protection. Do not wash coloured linen with whites. Watch the weight! For best results, do not exceed the weight limits stated below (figures show weight of dry garments): - Resistant fabrics: 5 kg maximum - Synthetic fabrics: 2.5 kg maximum - Delicate fabrics: 2 kg maximum - Pure new wool: 1 kg maximum How much does it weigh? 1 sheet 400-500 gr. 1 pillow case 150-200 gr. 1 tablecloth 400-500 gr. 1 bathrobe 900-1,200 gr. 1 towel 150-250 gr. Coloured T-shirts, printed ones and shirts last longer if turned inside out before washing. Printed T-shirts and sweatshirts should always be ironed inside out. Dungaree alert. Very popular salopette type overalls have straps with hooks that can damage the drum of your washer-dryer or other garments during the wash. To minimise the risk, place hooks in the pocket and fasten with safety pins. Holidays: unplug the appliance. It is recommended that you should unplug the machine from the socket and turn off the water supply. Leave the door ajar to allow air circulation to the draw and the door gasket area.This will prevent unpleasant odours.

WOOL CYCLE

For best results, we recommend you use a specific detergent, taking care not to wash more than 1 kg of laundry.
How to wash almost anything
Curtains. Curtains tend to crease a great deal. A useful tip to reduce creasing: fold the curtains and place them in a pillow case or mesh bag. Do not load anything else inside the appliance, this will ensure that the overall weight does not exceed the half load. Remember to use the specific programme 10 which automatically excludes the spin cycle. Quilted coats and anorak. You can wash quilted coats and wind-cheaters, too, if they are padded with goose or duck down. Do not load more than 2-3 kg and never load 5 kg. Repeat rinse once or twice using the gentle spin. Trainers. Once you have removed mud and dirt from trainers, you can even wash them with jeans or any other tough garments. Do not wash trainers with whites.
7 Instructions for installation and use
Its important for a good wash
Useful tips about the detergent dispenser
The first secret is the easiest: the detergent dispenser is opened by pull it outwards.
You must follow the dosage recommendations provided by the manufacturers when adding detergent or fabric conditioner. Doses will vary according to the wash load, the water hardness and how soiled the washing is. Experience will help you select the right dosage almost automatically: it will become your secret. Ensure no overfilling when adding fabric conditioner in compartment 3. The washer-dryer automatically adds the softener to the wash in each programme. Liquid detergent is poured into compar tment 2 just a few seconds before starting the wash cycle. Remember that liquid detergent is only designed for wash cycles of up to 60 degrees on non pre-wash items. Special containers are sold with liquid or powder detergents for placing inside the washer-dryer drum, these are positioned according to the instructions found in the detergent box Never use hand wash detergent, because it may form too much foam, which could damage the washer-dryer. Detergents that are specifically formulated for both hand and machine wash are an exception. One last secret: when washing with cold water, always reduce the amount of detergent you use: it dissolves less easily in cold water than in hot water, so part of it would be wasted.
In compartment 1: Detergent for pre-washing (powder) In compartment 2: Detergent for washing (powder or liquid)
In compartment 3: Additives (softeners, perfumes, etc.)
The detergent dispenser can be removed and cleaned: pull it outwards, as indicated in the figure. Then leave it under running water for a few minutes.

Cutting costs efficiently
A guide to environmentally friendly and economic use of your appliance.
MAXIMISE THE LOAD SIZE Achieve the best use of energy, water, detergent and time by using the recommended maximum load size. SAVE up to 50% energy by washing a full load instead of 2 half loads. DO YOU NEED TO PRE-WASH? For heavily soiled laundry only! SAVE detergent, time, water and between 5 to 15% energy consumption by NOT selecting Prewash for slight to normally soiled laundry. IS A HOT WASH REQUIRED? Pretreat stains with stain remover or soak dried in stains in water before washing to reduce the necessity of a hot wash programme. SAVE up to 50% energy by using a 60C wash programme. BEFORE USING A DRYING PROGRAMME. SAVE energy and time by selecting the highest suitable spin speed to reduce the water content in laundry before using a drying programme.
Instructions for installation and use 8

Troubleshooting

Before calling, read the following
In most cases, when your washer-dryer fails to work, the problems arising can be easily solved without having to call for a technician. Before calling for assistance, always check these points. The washer-dryer fails to start.
Is the plug correctly inserted into the socket? It could have been moved whilst cleaning. Is there electricity in the house? A circuit breaker may have switched off as a result of too many electrical appliances working at the same time. Or maybe due to a general failure in your entire area. Is the washer-dryer door closed properly? For safety reasons, the washer-dryer cannot work if the door is open or not shut properly. Is the On/Off button pressed? If it is, then a programmed start has been set. Is the programmed start knob, in the correct position for those models concerned? Is the water supply turned on? For safety reasons, if the washer-dryer does not load water, it cannot start a wash cycle. off, select one of the symbols stop/reset , then switch it back on. If the knob continues to turn, call for assistance because it is showing an anomaly.
But where did all the water go?
Simple: with the new Indesit technology, you need less than half of it, to get good results on twice as much! This is why you cannot see the water through the door: because there is little, very little of it, to respect the environment yet without renouncing maximum cleanliness. And, on top of that, you are also saving electricity.
The washer-dryer fails to fill with water.
Turn off the water supply after use. This will eliminate the possibility of leakage. Always leave the appliance door ajar to avoid bad odours. Clean the appliances exteriors gently. To clean the exteriors and the rubber parts of the appliance, always use a soft cloth dipped in warm and soapy water.
Leave the washer-dryer plugged in while cleaning. Even during maintenance, the appliance should always be unplugged. Use solvents and aggressive abrasives. Never use solvents or abrasives to clean the external and rubber parts of the washer-dryer. Neglect the detergent dispenser. It is removable and can easily be cleaned by leaving it under running water. Go on holiday without thinking about her. Before leaving, always make sure that the washer-dryer is unplugged and that the water supply is turned off.

Is the hose correctly connected to the tap? Is there a water shortage ? There could be work in progress in your building or street. Is there sufficient water pressure? The autoclave may be malfunctioning. Is the tap filter clean? If the water is very calcareous, or if work has recently been carried out on the water piping, the tap filter could be clogged with particles and debris. Is the rubber hose kinked? The tract of the rubber hose bringing water to washerdryer must be as straight as possible. Make sure it is not squashed or kinked.
The washer-dryer continuously fills and drains water.
Is the drain hose positioned too low? It must be installed at a height ranging from 60 to 100 cm. Is the end of the hose immersed in water? Does the wall drainage system have a breather pipe? If the problem persists even after these checks, turn the water supply off the machine and call for assistance. If you live on an upper floor of your building, there may be a problem with your drain trap. To solve this problem, a special valve must be installed.
The programme selector knob keeps turning?
Wait a few minutes for the drain pump to empty the tub, switch the washer-dryer
9 Instructions for installation and use
Is the drain hose kinked? The tract of the drain hose must be as straight as possible. Make sure the drain hose is not squashed or kinked. Is the washer-dryers drain duct clogged? Is there an extension of the drain hose? If so, is it positioned incorrectly, blocking the water flow?
Is there space between the machine and adjacent units? If it is not a built-in model, the washer-dryer will oscillate a bit during the spin cycle. A few cm of space should therefore be left around it.
The washer-dryer does not drain or spin.
Does the selected programme incorporates water draining? Some programmes stop at the end of the wash cycles and draining will have to be selected manually. Is the Anti-crease" function -where provided enabled? This function requires manual selection for draining. Is the drain pump clogged? To check it, turn off the water supply, unplug the washerdryer and follow the instructions on page 13, or call for technical assistance.

Instructions for installation and use 10

Installation and removal

When the new washer-dryer arrives
Whether new or just transported to a new house, installation is extremely important for the correct functioning of your washer-dryer.
After removing the appliance from its packaging, check that it is intact. If in doubt, contact a qualified technician immediately. The inside of the machine is supported, for transportation, by four screws on the back panel. Connection to the water mains Both hot and cold water supplies are preferable and they should be between 34.5kN/m(5lb/in) and 1034.2kN/m (150lb/in) pressure. The hose having the red end fitting should be encountered between the hot supply and the threaded connection adjacent to the letter H on the rear of the machine. The hose having the white end fittings should be connected between the cold supply and the threaded connection adjacent to the letter C on the rear of the machine. Remember to insert a sealing washer at each connection to ensure watertight joints. Do not overtighten the connections by using tools -hand tight is sufficient to prevent leaks. It is generally more convenient to have these supplies away from the sink taps. Where no suitable hot water supply is available or it does not meet these requirements, both inlet hoses may be connected to a cold supply by using two taps etc., or a T junction on the plumbing however, use of cold water only will increase programme times. Note: the maximum temperature should not exceed 70C (158F).
Connecting the drain hose The drain hose (hooked pipe) is secured to the rear of the machine by support clips and may be routed to right or left as required.
Electric connection Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below. WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN. Replacing the fuse: When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Before using the washer-dryer, remove the screws, remove the spacers together with the rubber tubes attached to them (keeping all the parts) and use the plastic plugs provided to fill in the holes. Important: Use the cap (provided) to close the 3 holes which housed the stop pin, situated in the righthand part of the lower back of the washer-dryer. Levelling The washer-dryer must be levelled appropriatey in order to guarantee its correct functioning.To level the appliance, the front feet must be adjusted; the angle of inclination, measured according to the worktop, must not exceed 2. When placed on carpet, make sure the ventilation is not reduced.
The hook to be used in case the drain hose ends at a height below 60 cm.
The drain hose should be placed in a stand pipe with a minimum internal diameter of 38 mm (1 inches) or it can be positioned over a sink or it can be connected as shown in Fig. A. The height of stand pipe or sink should be between 60 and 100 cm (24 and 40 inches). Care must be taken that the hose is not obstructed, twisted, submerged or kinked. If the hose is connected with an airtight joining, provision should be made to prevent syphoning.

The rubber gasket.

The front feet are adjustable.
Connect the inlet hose to the threaded connector on the machine rear.
The guide for draining into tubs and sinks.
Retain the transit screws, spacers and washers. Should you move house then these should be replaced to support the inside of the machine to prevent damage when transporting the machine.
Warning! The company denies all liability if and when these norms are not respected. Plastic bags, expanded styrofoam, nails and other packaging parts are not childrens toys, and are potentially dangerous.
Water pipe inlet at the top right. Fig. A
11 Instructions for installation and use
Replacement fuse covers: If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot. Removing the plug: If your appliance has a nonrewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either: the plug is replaced by a fused 13 ampere re-wearable plug bearing the BSI mark of approval. or: the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance. Disposing of the plug: Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket. Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code: Green & Yellow Earth Blue Neutral Brown Live As the colours of the wires in the lead may not correspond with the coloured markings identifyng the terminals in your plug, proceed as follows: Connect Green & Yellow wire to or terminal marked E or coloured Green or Green & Yellow. Connect Brown wire to terminal marked L or coloured Red. Connect Blue wire to terminal marked N or coloured Black. If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp fuse, either in the plug or adaptor or at the distribution board. If you are in any doubt the electrical supply to your machine, consult a qualified electrician before use.

Fig. 1

Fig. 2
The water inlet hose Check the rubber hose at least once a year. If you see any cracks, replace it immediately. When you use your washer-dryer, water pressure is very strong and a cracked tube could easily split open.
13 Instructions for installation and use
Important for the safe use of your washer-dryer
Your safety and that of your family
Read these instructions and all the information in this manual carefully: they are an important source, not only of numerous useful tips, but also of vital information on safety, use and maintenance. 1. the machine should not be installed in an outdoor environment, not even when a roof shelters the area, because it may be very dangerous to leave it exposed to rain and thunderstorms. 2. It must only be used by adults and exclusively for washing clothes following the instructions provided in this manual. 3. Should it have to be moved, proceed with the help of two or three people and handle it with the utmost care. Never try to do this alone, because the appliance is very heavy. 4. Before loading the washerdryer, make sure the drum is empty. 5. Never touch the washerdryer when barefoot or with wet or damp hands or feet. 6. Never use extensions or multiple plugs, which are particularly dangerous in humid environments. The power supply cable must never be bent or dangerously compressed. 7. Never open the detergent dispenser while the appliance is functioning; do not use hand wash detergent because the abundance of foam could damage its internal parts. 8. Never pull on the supply cable or the washer-dryer to disconnect it from the wall socket: it is extremely dangerous. 9. While the appliance is functioning, do not touch the drain water as it could reach very high temperatures. The appliance door, during wash cycles, tends to become hot; ensure
Your washer-dryer has been built in compliance with the strictest international safety regulations. To protect you and all your family.
that children do no touch it. Never force the washerdryer door because this could damage the safety lock which prevents accidental opening when the nachine is working. Allow a few minutes at the end of the program for the lock to release. 10. In case of malfunctioning, first close the water tap and unplug the appliance from the wall socket; do not under any circumstances touch internal parts in order to attempt repairs. 11. If you interrupt a Wash Programme before its end, then the water and clothes may be hot. The water level may also be above the door, see instruction for draining the machine before you open the door and handle with caution. 12. During the Tumble Drying programme and at its end, the clothes and drum of the machine may be hot, handle with caution and do not touch the drum.

I only want an authorised specialised technician with original Indesit spare parts!
How to change the power supply cable
The power supply cable must only be replaced by one of our authorised Service Engineers.
Instructions for installation and use 14

Stay in touch

THANK YOU for choosing an Indesit appliance. We are confident you have made a good choice and that your new appliance will give many years of excellent service. And we're there when you need us.
Register your purchase now
This will confirm your entitlement to enter our quarterly prize draw where you have the possibility to recover the cost of your purchase. Simply complete and return the Registration Form supplied with the appliance documents, using the FREEPOST envelope supplied. Or call the Registration Hotline on 4305.
We're as close to you as your telephone
For direct access to Genuine Indesit Spare Parts and Accessories, call 5850 and speak to our skilled staff who can help you to identify and purchase the item you require. For a Rapid Response to a problem with your appliance, call 0805. We're open from Monday to Saturday (8am - 5.30pm weekdays, 9am - 5pm Saturday). We have our own department of highly trained Indesit service staff. For most calls, our Service Engineer can fix the problem on the first visit. Please have the following details to hand when you ring us: The nature of the problem, the Model Number and the Serial Number. These numbers can be found on the appliance and on the portion of the Registration Card which you retain.
15 Instructions for installation and use
Instructions for installation and use 16
17 Instructions for installation and use
Instructions for installation and use 18

Merloni Elettrodomestici

Viale Aristide Merloni Fabriano Italy Tel +6611 Fax +662501 www.merloni.com

Leader for young Europe

10/2002 - 195029441.05 - XEROX BUSINESS SERVICES - DOCUTECH