Washer-dryer

Instructions for installation and use

WDE 12

Quick guide
Here are the 13 topics explained in this manual. Read, learn and have fun: you will discover many secret ways to get a better wash, more easily and making your washer-dryer last longer.
1. Installation and removal (p. 11)
Installation, after delivery or transport, is the most important operation for the correct functioning of your washer-dryer. Always check: 1. That the electric system conforms to regulations; 2. That the inlet and draining pipes are connected correctly. Never use hoses that have already been used, always use the new ones provided with your machine. 3. That the washer-dryer is levelled properly; something worth checking to aid the performance of your washer-dryer; 4. That the drum's fixing screws have been removed from the back of the washer-dryer;

2. 3. 4.

8. How to dry (p. 5)
A few handy tips to get the best drying cycle from your appliance.
What goes in your washer-dryer and how to start it (p. 2)
A correct distribution of your laundry is vital to the successful outcome of the wash and the life of the washer-dryer. Learn all the tips and secrets to dividing your linen: colour, type of fabric.
9. Care and maintenance (p. 13)
With just a bit of care, it will repay you with loyalty and devotion. With the necessary upkeep, it will wash for years and years to come.
Guide to understanding labels (p. 6)
The symbols on the labels of your garments are easy to understand and equally important for the success of your wash. The guide includes simple instructions to help you choose the right temperature, wash cycles and ironing methods.
10. Problems and solutions (p. 9 and 10)
Before calling a technician, read these pages: immediate solutions may be found for a number of problems. If the problem persists, call your local Indesit customer services who will be pleased to help. Any failure will be repaired, as soon as possible.
Useful tips to avoid mistakes (p. 7)
Years back, our grandmothers were the ones who gave us good advice - and in those days synthetic fibres did not exist: washing was easy. Today, your washer-dryer offers you helpful advice allowing you to wash wool even better than an expert laundress would by hand.
Technical characteristics (p. 10)
Herein are the technical features of your washer-dryer: model type number, electric and water specifications, size, capacity, speed of the spin cycle and compliance with Italian and European regulations.
The detergent dispenser (p. 8)
How to use the detergent dispenser and the bleach compartment.
12. Safety for you and your family (p. 14)
Here you will find the necessary safety guidelines, and it is important for you to read this section carefully.
Understanding the control panel (p. 3 and 4)
Washer-dryers control panel is very simple. It has only a few essential buttons to help you choose any type of wash cycle, ranging from the most energetic, capable of cleaning a mechanics overalls, to the most delicate for wool. Familiarising yourself with it will help you get the best out of your wash while helping your washer-dryer last longer. Its easy.
Indesit stays with you after your purchase (p. 15)
Indesit supports its products after their purchase by offering you a range of special services, professional assistance, spare parts and quality accessories.
7. Guide to the wash programmes (p. 4)
Herein is an easy table to help you choose the right programme, temperature, detergents and possible additives. Choose the right programme and you will get better results with your wash while saving time, water and energy, day after day.
What goes in your washer-dryer?
Before washing, you can do a great deal to ensure better results. Divide your garments according to fabric and colour. Read the labels, follow their guidelines.

Before washing.

Divide your washing according to the type of fabric and colour fastness. Empty all pockets (coins, paper, money and small objects) and ensure all loose buttons are repaired or removed prior to loading.
Dividing your garments according to fabric and colour, is very important for good results

The labels say it all.

Always look at the labels: they tell you everything about your garment and how to wash it in the best possible way. The table on page 5 shows all meanings behind these symbols. Their recommendations are important to achieve better wash results.

Big and small happily together.
This washer-dryer has a special electronic control device for even distribution: before the spin cycle starts, this device allows the garments to positions themselves, to minimise noise and vibrations during the spin cycle.
Starting the washer-dryer
After installing your new washer-dryer, start a wash cycle by setting programme "1" at 90 degrees.
Starting your washer-dryer in the right way is important for the quality of your wash, to help prevent future problems and enhance life expectancy of your appliance. Once you have loaded your washer-dryer and added the detergent together with any fabric conditioner, always check that: 1. The door is closed correctly. 2. The plug is secured in the socket. 3. The water supply is turned on. Turn the appliance on Press button C (position I). Choose the desired programme The programme is selected according to the type of garments that need to be washed.To choose a programme, refer to the table on page 4. Turn knob A until the selected programme is aligned with the mark on the knob, set all the options available (flashing) as indicated on pages 3 and 4 ), then press (reference button B (Start/Reset). If you want to interrupt the programme in progress, press button B for at least 3 seconds.
For more delicate garments: protect underwear, tights and stockings and delicate items by placing them in a canvas pouch
At the end of the wash cycle. Wait for symbol to come off and the word End to appear. Then turn the washer-dryer off by pressing on-off button C (O position). You can now open the washer-dryer door safely. After having removed the freshly cleaned washing, leave the door open to allow air circulation inside the drum. Always disconnect electricity at the socket and turn off the water supply.
Remember that, in the event of a power failure, or should the washer-dryer switch itself off, the programme chosen will remain in its memory.
How to eliminate the most common stains
Ink and biro Dab with a wad of cotton soaked in methyl alcohol or alcohol at 90. Tar Dab with fresh butter, rub in turpentine then wash immediately. Wax Scrape away, then run a hot iron between two sheets of absorbent paper. Then rub in cotton with turpentine or methyl alcohol. Chewing gum Rub in nail polish remover and wipe with a clean rag. Mold Cotton and white linen should be placed in a solution of 5 parts water, one bleach and a spoon of vinegar, then washed immediately. For other white fabrics, use hydrogen peroxide at 10 volumes and wash immediately. Lipstick Dab with ether on wool or cotton. Use tricloroetilene for silk. Nail polish Place a sheet of absorbent paper on the side of the stain, wet it with nail polish remover, shifting the garment as the sheet gradually changes colour. Grass Dab with a wad of cotton soaked in methyl alcohol.

Here Im in command

Making the right choice is important. And its easy.
Programme selector knob Use this knob to select the wash or drying programme. To select a programme, you should turn the knob so that the symbol/number of the desired programme is in line with the pointer on the knob.
Understanding the control panel

select

Start /Reset This button allows you to start the selected wash programme or to interrupt it. If you press it briefly, the button functions as Start, if you press it for at least 3 seconds, then it functions as Reset. After the Start of the appliance, moving the programme selector knob will have no effect whatsoever. On-off When button C is pressed, the washer-dryer is switched on, when it is not the machine is switched off. Turning the appliance off does not cancel the selected programme. When the appliance is switched on, all the symbols on the display light up for at least 8 seconds, after which only the ones that can be selected will flash. Detergent dispenser It is divided into three compartments: 1. Detergent for pre-wash; 2. Detergent for the main cycle wash; 3. Fabric conditioner. The washer-dryer is equipped with an extra compartment 4 (provided as an accessory) for the bleach, to be inserted in compartment 1.
Display All the options available are displayed on the right-hand side. Use the mode button to select the desired option, and the relative symbol will begin flashing. On the left-hand side, the value or the status (On-Off) of the selected option is displayed, and you can modify it using the select button. To access the subsequent option, press the mode button, otherwise press button B to start the wash cycle. All the options available are listed below. Only options relevant to the selected programme will be displayed. Temperature The display indicates the maximum temperature relating to the programme set, which can be reduced by pressing the select button right down to cold wash (Off). This option is available on all wash programmes. Spin Variation The display indicates the maximum speed relating to the programme set, which can be reduced by pressing the select button right down to its total exclusion (Off).
You may not select a drying cycle if you have excluded the spin cycle. During a wash cycle, the selection of the spin cycle exclusion is indicated by symbol coming on. This option is available on all wash programmes except for number 10 and Drain. Delay Timer This allows you to delay the start of the wash cycle by a minimum of 1 to a maximum of 24 hours by pressing the select button. The enabling of the delayed start is indicated by the symbol coming on and staying on until the wash cycle begins. This option is not available on the Drain and Light spin cycle programmes. Easy Ironing This function allows your washing to come out of the machine without creases, making it much easier to iron. The appliance optimises the washing conditions according to the type of fabrics that are being washed. It is enabled with programmes 3-5-6-7-10 and Light rinse cycles. To enable it, press the select button until the On sign comes on. In programmes 6-7-10 and Light Rinse cycles, the wash cycle is interrupted and the washing is left to soak in water before the appliance is drained. To complete the cycle, press the select button. During a wash cycle, the enabling of this option is indicated by coming on. symbol Note: - It must not be used with the Stain Erase option. - If you also want to run the drying cycle, this button is enabled only if combined with level (Iron).

90C 90C 60C 40C 40C

x x x x x
Del./Trad. Del./Trad. Del./Trad.
Prewash cycle, wash cycle at 90C, rinse cycles, intermediate and final spin cycles Wash cycle at 90C, rinse cycles, intermediate and final spin cycles Wash cycle at 60C, rinse cycles, intermediate and final spin cycles Wash cycle at 40C, rinse cycles, intermediate and final spin cycles Wash cycle at 40C, rinse cycles, intermediate and final spin cycles

50-60C 40C 40C 30C

x x x x
Delicate Delicate Delicate
Wash cycle at 50-60C, rinse cycles, anticrease or delicate spin cycle Wash cycle at 40C, rinse cycles, anticrease or delicate spin cycle Wash cycle at 40C, rinse cycles, anticrease or delicate spin cycle Wash cycle at 30C, rinse cycles and delicate spin cycle

40C 30C

Delicate
Wash cycle at 40C, rinse cycles and delicate spin cycle Wash cycle at 30C, rinse cycles, anticrease or draining
Rinse cycles, anti-crease or draining Draining and delicate spin cycle Draining
Important: to cancel the wash programme you have just set, press button B for at least 3 seconds (Start/Reset). The data found in the table is purely indicative, and can vary according to the quantity and type of washing, the water system temperature and the room temperature.

Special programmes

Class A at 40C Your washer-dryer has a special programme to allow you to obtain optimum results even at low temperatures. By setting programme 4 at a temperature of 40 C, the results you will obtain will be the same as you would normally obtain at 60C thanks to the washer-dryers action and the length of the wash cycle. Daily wash Your washer-dryer has a programme available for the washing of lightly soiled garments in a short amount of time. By setting programme 8 at a temperature of 30C, you can wash different types of fabrics together (except for wool and silk), with a maximum load of 3 kg. This programmes allows you to save on both time and energy as it only lasts around 30 minutes. We recommend the use of liquid detergent.

How to dry

A combined Washing and Drying Programme
Look at table A to the side and follow the instructions provided for MAX load to have an automatic washing and drying cycle. Follow the instructions for washing only (see the "Starting the Washer-Dryer" paragraph on page 2) and set the type of drying desired as indicated below:

Dry only

Once you have loaded the washing that needs drying (4 kg max. for cottons, see table for other fabrics ), make sure that: - the door is shut correctly; - the plug is inserted in the socket; - the water tap is turned on; - button C has not been pressed (O position). And now set the wash cycle knob Set knob A to one of the drying depending on the positions type of fabric, select the type of drying desired:
Fabric type Load type Max. load (kg) Extra dry Cotton, Linen Clothing of different sizes Terry towels Sheets, Shirts Pyjamas, socks, etc. Slips, tights, stockings, etc. Knitwear, Pullovers, etc.

Drying time (Min.)

Wardrobe

Cotton

Terital, Cotton Acrylics

Extra dry

then press button B (Start/ Reset). If the laundry load to be washed and dried exceeds the maximum load foreseen (see table A), then follow the instructions provided for wash only (see page 2, the paragraph entitled "Starting the WasherDryer"). When the wash cycle has finished, remove your washing, divide it up and replace part of it inside the drum. Now follow the instructions provided for a dry only cycle. Repeat this procedure for the remainder of the load.
then press button B (Start/ Reset). At the end of the drying cycle. Wait for symbol to come off and the word End to appear. Then turn the washer-dryer off by pressing on-off button C (O position). Now you can open the appliance door. Once you have removed the washing from the appliance, leave the door open or ajar to avoid the formation of bad odours and turn off the water tap. Drying types You can choose from 3 different types of drying, depending on your needs: Iron : slightly damp clothes, easy to iron. Wardrobe : dry clothes to put away. Extra dry : very dry clothes, recommended for towelling and bathrobes. A cooling stage is foreseen at the end of the drying cycle.
The data contained in the table are purely indicative. For cotton loads of less than 1 Kg, use the drying programme designed for synthetic fabrics.

IMPORTANT

A spin cycle is carried out during the drying if you have set a cotton programme.

WARNING

- During the drying phase, the door tends to get quite hot. - Do not use the appliance to dry clothes that have been washed with flammable solvents (e.g. trichlorethylene). - Do not use the appliance to dry foam rubber or similar elastomers. - Make sure that the water tap is turned on during the drying cycles. - This washer-dryer can only be used to dry clothes which have been pre-washed in water.

Understanding labels

Learn the meaning of these symbols and you will get better results, your garments will last longer resulting in an improved wash.
All over Europe, garment labels contain messages expressed in small yet important symbols. Understanding them is very important if you want to get better results and treat your garments the way they deserve to be treated. These symbols are divided into five different categories and shapes: washing , bleaching , ironing , dry cleaning and drying.

Useful tips

Turn shirts inside out to get better results and make them last longer. Always empty pockets of their contents. Look at the label: it will always give you useful advice. When loading your washing, try to have a mixture of large to small items.
Make sure you select the right temperature!
Consult and learn the symbols in this table: they will help you obtain a better wash, treat your clothes properly, and get a better performance out of your washer-dryer.
Strong action Delicate action

Bleaching

Ironing

Dry cleaning

High Temp.

Drying

Low Temperat.
Wash at 95C Bleaching only in cold water Hot iron at max 200C
Dry clean with any solvent Machine dryable
Wash at 60C Medium hot ironing at max 150C Dry clean only with perchloride, benzine av., pure alcohol, R111 and R113 Do not machine dry

Do not bleach

Wash at 40C Iron at max 110C Dry clean with av. benzine, pure alcohol and R113 Spread to dry

Wash at 30C

Not ironable

Do not dry clean

Hang to dry without spin drying
Hand wash Not washable in water

Dry on clothes hanger

Never use your washerdryer to wash. torn, fraying or non-hemmed linen. If it is absolutely neccessary, place it in a bag for protection. Do not wash coloured linen with whites. Watch the weight! For best results, do not exceed the weight limits stated below (figures show weight of dry garments): - Resistant fabrics: 5 kg maximum - Synthetic fabrics: 2.5 kg maximum - Delicate fabrics: 2 kg maximum - Pure new wool: 1 kg maximum How much does it weigh? 1 sheet 400-500 gr. 1 pillow case 150-200 gr. 1 tablecloth 400-500 gr. 1 bathrobe 900-1,200 gr. 1 towel 150-250 gr. Coloured T-shirts, printed ones and shirts last longer if turned inside out before washing. Printed T-shirts and sweatshirts should always be ironed inside out. Dungaree alert. Very popular salopette type overalls have straps with hooks that can damage the drum of your washer-dryer or other garments during the wash. To minimise the risk, place hooks in the pocket and fasten with safety pins. Holidays: unplug the appliance. It is recommended that you should unplug the machine from the socket and turn off the water supply. Leave the door ajar to allow air circulation to the draw and the door gasket area.This will prevent unpleasant odours.

WOOL CYCLE

For best results, we recommend you use a specific detergent, taking care not to wash more than 1 kg of laundry.
How to wash almost anything
Curtains. Curtains tend to crease a great deal. A useful tip to reduce creasing: fold the curtains and place them in a pillow case or mesh bag. Do not load anything else inside the appliance, this will ensure that the overall weight does not exceed the half load. Remember to use the specific programme 10 which automatically excludes the spin cycle. Quilted coats and anorak. You can wash quilted coats and wind-cheaters, too, if they are padded with goose or duck down. Do not load more than 2-3 kg and never load 5 kg. Repeat rinse once or twice using the gentle spin. Trainers. Once you have removed mud and dirt from trainers, you can even wash them with jeans or any other tough garments. Do not wash trainers with whites.

EXCLUSIVE

Cashmere Gold: As gentle as a hand wash
The first Washing Machine to have "The Woolmark Company" recognition.
The Cashmere Gold wash programme has been studied for its machine wash ability, which enables washing for even the most delicate and valuable of wool or Cashmere garments. The Merloni Elettrodomestici wool wash cycle has been tested and approved by The Woolmark Company for washing Woolmark garments labelled as hand wash. This is the first gentle action hand wash cycle approved by The Woolmark Company. M.00221 This has been made possible thanks to the speed of the drum at 90 rpm, even during the rinse cycle, thus preventing the fibres from rubbing. Always use programme 9 with garments bearing the hand wash drawing; represented by the washbasin and the hand. To take care of your woollen items, we recommend you use special detergents.
Its important for a good wash
Useful tips about the detergent dispenser
The first secret is the easiest: the detergent dispenser is opened by pull it outwards.
You must follow the dosage recommendations provided by the manufacturers when adding detergent or fabric conditioner. Doses will vary according to the wash load, the water hardness and how soiled the washing is. Experience will help you select the right dosage almost automatically: it will become your secret. Before adding detergent for prewashing in compartment 1, make sure that the extra compartment for bleach 4 has not been inserted. Ensure no overfilling when adding fabric conditioner in compartment 3. The washer-dryer automatically adds the softener to the wash in each programme. Liquid detergent is poured into compar tment 2 just a few seconds before starting the wash cycle. Remember that liquid detergent is only designed for wash cycles of up to 60 degrees on non pre-wash items. Special containers are sold with liquid or powder detergents for placing inside the washer-dryer drum, these are positioned according to the instructions found in the detergent box Never use hand wash detergent, because it may form too much foam, which could damage the washer-dryer. Detergents that are specifically formulated for both hand and machine wash are an exception. One last secret: when washing with cold water, always reduce the amount of detergent you use: it dissolves less easily in cold water than in hot water, so part of it would be wasted.

In compartment 1: Detergent for pre-washing (powder) In compartment 2: Detergent for washing (powder or liquid)
In compartment 3: Additives (softeners, perfumes, etc.) In compartment 4: Bleach and delicate bleach.

Bleach cycle

If bleaching is necessary, the extra case 4 (provided) must be inserted into compartment 1 of the detergent dispenser. When pouring in the bleach, be careful not to exceed the "max" level indicated on the central pivot (see illustration). The use of the additional bleach container excludes the possibility of using the pre-wash cycle. Traditional bleach can only be used on sturdy white fabrics, whereas delicate bleach can be used for coloured fabrics, synthetics and for wool.
The detergent dispenser can be removed and cleaned: pull it outwards, as indicated in the figure. Then leave it under running water for a few minutes.
Cutting costs efficiently
A guide to environmentally friendly and economic use of your appliance.
MAXIMISE THE LOAD SIZE Achieve the best use of energy, water, detergent and time by using the recommended maximum load size. SAVE up to 50% energy by washing a full load instead of 2 half loads. DO YOU NEED TO PRE-WASH? For heavily soiled laundry only! SAVE detergent, time, water and between 5 to 15% energy consumption by NOT selecting Prewash for slight to normally soiled laundry. IS A HOT WASH REQUIRED? Pretreat stains with stain remover or soak dried in stains in water before washing to reduce the necessity of a hot wash programme. SAVE up to 50% energy by using a 60C wash programme. BEFORE USING A DRYING PROGRAMME. SAVE energy and time by selecting the highest suitable spin speed to reduce the water content in laundry before using a drying programme.
You cannot bleach with the Silk programme and with the special programmes (see page 4). Should you wish to bleach separately, pour the bleach into extra compartment 4 and set. the light rinse The rinse level should be set to Medium or High (see page 3). When bleaching during a normal wash cycle, pour in the detergent and additives into the special compartments (see table on page 4), set the desired programme and select the stain erase option.

Troubleshooting

Before calling, read the following
In most cases, when your washer-dryer fails to work, the problems arising can be easily solved without having to call for a technician. Before calling for assistance, always check these points. The washer-dryer fails to start.
Is the plug correctly inserted into the socket? It could have been moved whilst cleaning. Is there electricity in the house? A circuit breaker may have switched off as a result of too many electrical appliances working at the same time. Or maybe due to a general failure in your entire area. Is the washer-dryer door closed properly? For safety reasons, the washer-dryer cannot work if the door is open or not shut properly. Is the On/Off button pressed? If it is, then a programmed start has been set. Has the Start/Reset button been pressed? If it is, then a programmed start has been set. Is the water supply turned on? For safety reasons, if the washer-dryer does not load water, it cannot start a wash cycle.
But where did all the water go?
Simple: with the new Indesit technology, you need less than half of it, to get good results on twice as much! This is why you cannot see the water through the door: because there is little, very little of it, to respect the environment yet without renouncing maximum cleanliness. And, on top of that, you are also saving electricity.
Turn off the water supply after use. This will eliminate the possibility of leakage. Always leave the appliance door ajar to avoid bad odours. Clean the appliances exteriors gently. To clean the exteriors and the rubber parts of the appliance, always use a soft cloth dipped in warm and soapy water.
Leave the washer-dryer plugged in while cleaning. Even during maintenance, the appliance should always be unplugged. Use solvents and aggressive abrasives. Never use solvents or abrasives to clean the external and rubber parts of the washer-dryer. Neglect the detergent dispenser. It is removable and can easily be cleaned by leaving it under running water. Go on holiday without thinking about her. Before leaving, always make sure that the washer-dryer is unplugged and that the water supply is turned off.
The washer-dryer fails to fill with water.
Is the hose correctly connected to the tap? Is there a water shortage ? There could be work in progress in your building or street. Is there sufficient water pressure? The autoclave may be malfunctioning. Is the tap filter clean? If the water is very calcareous, or if work has recently been carried out on the water piping, the tap filter could be clogged with particles and debris. Is the rubber hose kinked? The tract of the rubber hose bringing water to washerdryer must be as straight as possible. Make sure it is not squashed or kinked.
The washer-dryer continuously fills and drains water.
Is the drain hose positioned too low? It must be installed at a height ranging from 60 to 100 cm. Is the end of the hose immersed in water? Does the wall drainage system have a breather pipe? If the problem persists even after these checks, turn the water supply off the machine and call for assistance. If you live on an upper floor of your building, there may be a problem with your drain trap. To solve this problem, a special valve must be installed.

The washer-dryer doesn't dry properly.
Check whether: the end of the drain hose is underwater; the drain pump is obstructed; the advice given on the maximum loads has been taken; the water tap has been turned on. If, despite all checks, the washer-dryer fails to function and the problem persists, call your nearest authorised Customer Service Centre, providing the following information: - the nature of malfunction - the model type no. (Mod.) - the serial number (S/N.) This information can be found on the data plate situated at the back of the washer-dryer.
Capacity Electrical connections Water connections
Spinning speed Control programs in compliance with IEC regulation 456
This appliance conforms with the following E.E.C. directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications - 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications
Instructions for installation and use 10

Installation and removal

When the new washer-dryer arrives
Whether new or just transported to a new house, installation is extremely important for the correct functioning of your washer-dryer.
After removing the appliance from its packaging, check that it is intact. If in doubt, contact a qualified technician immediately. The inside of the machine is supported, for transportation, by four screws on the back panel. Connection to the water mains Both hot and cold water supplies are preferable and they should be between 34.5kN/m(5lb/in) and 1034.2kN/m (150lb/in) pressure. The hose having the red end fitting should be encountered between the hot supply and the threaded connection adjacent to the letter H on the rear of the machine. The hose having the white end fittings should be connected between the cold supply and the threaded connection adjacent to the letter C on the rear of the machine. Remember to insert a sealing washer at each connection to ensure watertight joints. Do not overtighten the connections by using tools -hand tight is sufficient to prevent leaks. It is generally more convenient to have these supplies away from the sink taps. Where no suitable hot water supply is available or it does not meet these requirements, both inlet hoses may be connected to a cold supply by using two taps etc., or a T junction on the plumbing however, use of cold water only will increase programme times. Note: the maximum temperature should not exceed 70C (158F).

Connecting the drain hose The drain hose (hooked pipe) is secured to the rear of the machine by support clips and may be routed to right or left as required.
Electric connection Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below. WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN. Replacing the fuse: When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained. Replacement fuse covers: If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.
Before using the washer-dryer, remove the screws, remove the spacers together with the rubber tubes attached to them (keeping all the parts) and use the plastic plugs provided to fill in the holes. Important: Use the cap (provided) to close the 3 holes which housed the stop pin, situated in the right-hand part of the lower back of the washer-dryer. Levelling The washer-dryer must be levelled appropriately in order to guarantee its correct functioning. To level the appliance, the front feet must be adjusted; the angle of inclination, measured according to the worktop, must not exceed 2. When placed on carpet, make sure the ventilation is not reduced.
The hook to be used in case the drain hose ends at a height below 60 cm.
The drain hose should be placed in a stand pipe with a minimum internal diameter of 38 mm (1 inches) or it can be positioned over a sink or it can be connected as shown in Fig. A. The height of stand pipe or sink should be between 60 and 100 cm (24 and 40 inches). Care must be taken that the hose is not obstructed, twisted, submerged or kinked. If the hose is connected with an airtight joining, provision should be made to prevent syphoning.

The rubber gasket.

The front feet are adjustable.
Connect the inlet hose to the threaded connector on the machine rear.
The guide for draining into tubs and sinks.
Retain the transit screws, spacers and washers. Should you move house then these should be replaced to support the inside of the machine to prevent damage when transporting the machine.
Warning! The company denies all liability if and when these norms are not respected. Plastic bags, expanded styrofoam, nails and other packaging parts are not childrens toys, and are potentially dangerous.
Water pipe inlet at the top right. Fig. A
11 Instructions for installation and use
Removing the plug: If your appliance has a nonrewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either: the plug is replaced by a fused 13 ampere re-wearable plug bearing the BSI mark of approval. or: the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance. Disposing of the plug: Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket. Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code: Green & Yellow Earth Blue Neutral Brown Live As the colours of the wires in the lead may not correspond with the coloured markings identifyng the terminals in your plug, proceed as follows: Connect Green & Yellow wire to or terminal marked E or coloured Green or Green & Yellow. Connect Brown wire to terminal marked L or coloured Red. Connect Blue wire to terminal marked N or coloured Black. If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp fuse, either in the plug or adaptor or at the distribution board. If you are in any doubt the electrical supply to your machine, consult a qualified electrician before use. How to connect an alternative plug: The wires in this mains lead are coloured in accordance with the following code: BLUE NEUTRAL(N) BROWN LIVE (L) GREEN&YELLOW EARTH(E)
Disposing of the appliance: When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.

GREEN & YELLOW

13 ampere fuse

CROSS-BAR CORD GRIP

Instructions for installation and use 12
Easy Care and Maintenance

WDE 12 X

W asher-dryer Instructions for installation and use Mquina de lavar e enxugar roupa Instrues para a instalao e a utilizao Lavasecadora Instrucciones para la instalacin y uso
GB Washer-dryer Instructions for installation and use
P Mquina de lavar e enxugar roupa
Instrues para a instalao e a utilizao

E Lavasecadora

Instrucciones para la instalacin y uso

Quick guide

Here are the 12 topics explained in this manual. Read, learn and have fun: you will discover many secret ways to get a better wash, more easily and making your washer-dryer last longer.
1. Installation and removal (p. 11)
Installation, after delivery or transport, is the most important operation for the correct functioning of your washer-dryer. Always check: 1. That the electric system conforms to regulations; 2. That the inlet and draining pipes are connected correctly. Never use pipes that have already been used. 3. That the washer-dryer is levelled properly; something worth checking to aid the performance of your washer-dryer; 4. That the drum's fixing screws have been removed from the back of the washer-dryer;

2. 3. 4.

What goes in your washer-dryer and how to start it (p. 2)

8. How to dry (p. 5)

A few handy tips to get the best drying cycle from your appliance.
A correct distribution of your laundry is vital to the successful outcome of the wash and the life of the washer-dryer. Learn all the tips and secrets to dividing your linen: colour, type of fabric.
9. Care and maintenance (p. 14)
With just a bit of care, it will repay you with loyalty and devotion. With the necessary upkeep, it will wash for years and years to come.
Guide to understanding labels (p. 6)
The symbols on the labels of your garments are easy to understand and equally important for the success of your wash. The guide includes simple instructions to help you choose the right temperature, wash cycles and ironing methods.
10. Problems and solutions (p. 9 and 10)
Before calling a technician, read these pages: immediate solutions may be found for a number of problems. If the problem persists, call your local Indesit customer services who will be pleased to help. Any failure will be repaired, as soon as possible.
Useful tips to avoid mistakes (p. 7)
Years back, our grandmothers were the ones who gave us good advice - and in those days synthetic fibres did not exist: washing was easy. Today, your washer-dryer offers you helpful advice allowing you to wash wool even better than an expert laundress would by hand.
Technical characteristics (p. 10)
The detergent dispenser (p. 8)
Herein are the technical features of your washer-dryer: model type number, electric and water specifications, size, capacity, speed of the spin cycle and compliance with Italian and European regulations.
How to use the detergent dispenser and the bleach compartment.
12. Safety for you and your family (p. 15)
Here you will find the necessary safety guidelines, and it is important for you to read this section carefully.
Understanding the control panel (p. 3)
Washer-dryers control panel is very simple. It has only a few essential buttons to help you choose any type of wash cycle, ranging from the most energetic, capable of cleaning a mechanics overalls, to the most delicate for wool. Familiarising yourself with it will help you get the best out of your wash while helping your washer-dryer last longer. Its easy.
7. Guide to the wash programmes (p. 4)
Herein is an easy table to help you choose the right programme, temperature, detergents and possible additives. Choose the right programme and you will get better results with your wash while saving time, water and energy, day after day.
1 Instructions for installation and use
What goes in your washer-dryer?
Before washing, you can do a great deal to ensure better results. Divide your garments according to fabric and colour. Read the labels, follow their guidelines.

Before washing.

Divide your washing according to the type of fabric and colour fastness. Empty all pockets (coins, paper, money and small obejects) and ensure all loose buttons are repaired or removed prior to loading.
Dividing your garments according to fabric and colour, is very important for good results

The labels say it all.

Always look at the labels: they tell you everything about your garment and how to wash it in the best possible way. The table on page 6 shows all meanings behind these symbols. Their recommendations are important to achieve better wash results.

Big and small happily together.
This washer-dryer has a special electronic control device for even distribution: before the spin cycle starts, this device allows the garments to positions themselves, to minimise noise and vibrations during the spin cycle.
Starting the washer-dryer
After installing your new washer-dryer, start a wash cycle by setting programme "1" at 90 degrees.
Starting your washer-dryer in the right way is important for the quality of your wash, to help prevent future problems and enhance life expectancy of your appliance. Once you have loaded your washer-dryer and added the detergent together with any fabric conditioner, always check that: 1. The door is closed correctly. 2. The plug is secured in the socket. 3. The water supply is turned on. 4. Selector knob A is positioned on one of the symbols (Stop/ Reset). Choose the desired programme The programme is selected according to the type of garments that need to be washed.To choose a programme, refer to the table on page 4. Turn knob A until the selected programme is aligned with the mark on the knob, turn knob B to the desired temperature settings,check that knob C is in the desired position, if necessary use buttons E, F, G and lastly, press on/off button H (I position).
For more delicate garments: protect underwear, tights and stockings and delicate items by placing them in a canvas pouch
At the end of the wash cycle. Lamp I will flash quickly for a few seconds, then it will begin flashing more slowly. Then turn the washer-dryer off by pressing on-off button H (O position). You can now open the washer-dryer door safely. After having removed the freshly cleaned washing, leave the door open to allow air circulation inside the drum.
Always disconnect electricity at the socket and turn off the water supply. Remember that, in the event of a power failure, or should the washer-dryer switch itself off, the programme chosen will remain in its memory.
How to eliminate the most common stains
Ink and biro Dab with a wad of cotton soaked in methyl alcohol or alcohol at 90. Tar Dab with fresh butter, rub in turpentine then wash immediately. Wax Scrape away, then run a hot iron between two sheets of absorbent paper. Then rub in cotton with turpentine or methyl alcohol. Chewing gum Rub in nail polish remover and wipe with a clean rag. Mold Cotton and white linen should be placed in a solution of 5 parts water, one bleach and a spoon of vinegar, then washed immediately. For other white fabrics, use hydrogen peroxide at 10 volumes and wash immediately. Lipstick Dab with ether on wool or cotton. Use tricloroetilene for silk. Nail polish Place a sheet of absorbent paper on the side of the stain, wet it with nail polish remover, shifting the garment as the sheet gradually changes colour. Grass Dab with a wad of cotton soaked in methyl alcohol.

On-off When button H is pressed, the washer-dryer is switched on, when it is not the machine is switched off. Turning the appliance off does not cancel the selected programme.
On-off lamp / door locked Lamp I flashes slowly when the appliance is switched on and awaiting instructions and at the end of a cycle, indicating that the door can be opened. It flashes quickly when the door should not be opened. A steady light means the appliance has accepted the selected programme.
Drying cycle lamp When this lamp is on, it means that knob C has been set on a drying cycle and at the end of the wash cycle, the appliance will run the selected tumble drying cycle.
Detergent dispenser It is divided into 3 compartments: 1. Detergent for pre-wash; 2. Detergent for the main cycle wash; 3. Fabric conditioner.
The detergent dispenser with the additional bleach compartment is here.
Stain removal (see page 8) Thanks to this command, the washer-dryer will carry out a more intensive wash that optimises the effectiveness of the liquid additives, thus allowing more resistant stains to be removed. When you press the stain removal button, you cannot activate the pre-wash.
3 Instructions for installation and use
What are you washing today?
A programme for all seasons
Type of fabric and degree of soil Programme Temperature Detergent knob knob for wash Fabric softener Stain rem. Length of button/ the cycle Bleach (minutes) Description of wash cycle COTTON Exceptionally soiled whites (sheets, tablecloths, etc.) Exceptionally soiled whites (sheets, tablecloths, etc.) Heavily soiled whites and fast colours Slightly soiled whites and delicate colours (shirts, jumpers, etc.) Rinse cycles/Bleach Spin cycle Drying cycle for cotton fabrics Stop/Reset SYNTHETICS Heavily soiled fast colour synthetics (baby linen, etc.) Delicate colour synthetics (all types of slightly soiled garments) Delicate colour synthetics (all types of slightly soiled garments) Rinse cycles/Bleach Fabric softener Spin cycle Drying cycle for synthetic fabrics Stop/Reset DELICATES Hand wash Particularly delicate garments and fabrics (curtains, silk, viscose, etc.) Rinse cycles Spin cycle Draining Drying cycle for wool Stop/Reset

Interrupts/Cancels the selected programme Interrupts/Cancels the selected programme Interrupts/Cancels the selected programme

90C 90C 60C 40C

x x x x

x x x x x

Del./Trad. Del./Trad. Del./Trad. Del./Trad.

130 95

Prewash cycle, wash cycle at 90C, rinse cycles, intermediate and final spin cycles Wash cycle at 90C, rinse cycles, intermediate and final spin cycles Wash cycle at 60C, rinse cycles, intermediate and final spin cycles Wash cycle at 40C, rinse cycles, intermediate and final spin cycles Rinse cycles, intermediate and final spin cycles Draining and final spin cycle

60C 40C 30C

Delicate Delicate
Wash cycle at 60C, rinse cycles, anticrease or delicate spin cycle Wash cycle at 40C, rinse cycles, anticrease or delicate spin cycle Wash cycle at 30C, rinse cycles and delicate spin cycle Rinse cycles, anti-crease or delicate spin cycel Rinse cycles with automatic introduction of softener, anti-crease or delicate spin cycle Draining and delicate spin cycle

Delicate

40C 30C
Wash cycle at 40C, rinse cycles and delicate spin cycle Wash cycle at 30C, rinse cycles, anticrease or draining Rinse cycles, anti-crease or draining Draining and delicate spin cycle Draining
Important: to cancel the wash programme you have just set, select one of the symbols
(Stop/Reset) and wait for at least 5 seconds.
The data found in the table is purely indicative, and can vary according to the quantity and type of washing, the water system temperature and the room temperature.

Special programme

Daily wash Your washer-dryer has a programme available for the washing of lightly soiled garments in a short amount of time. By setting programme 7 at a temperature of 30C, you can wash different types of fabrics together (except for wool and silk), with a maximum load of 3 kg. This programmes allows you to save on both time and energy as it only lasts around 30 minutes.
WE RECOMMEND THE USE LIQUID DETERGENT.
Instructions for installation and use 4

How to dry

A combined Washing and Drying Programme
Look at table A to the side and follow the instructions provided for MAX load to have an automatic washing and drying cycle. Follow the instructions for wash only (see page 2, the paragraph entitled "Starting the WasherDryer") and use knob C to set the type of drying cycle desired, then press button H (I position). If the laundry load to be washed and dried exceeds the maximum load foreseen (see table A), then follow the instructions provided for wash only (see page 2, the paragraph entitled "Starting the WasherDryer"). When the wash cycle has finished, remove your washing, divide it up and replace part of it inside the drum. Now follow the instructions provided for a dry only cycle. Repeat this procedure for the remainder of the load.

Dry only

Once you have loaded the washing that needs drying (4 kg max. for cottons, see table for other fabrics ), make sure that: - the door is shut correctly; - the plug is inserted in the socket; - the water tap is turned on; - button H has not been pressed (O position). And now set the wash cycle knob Set knob A on the appropriate depending on drying setting the type of fabric, select the type of drying cycle required using knob C and then press on-off button H (I position). At the end of the drying cycle. Wait for lamp I to flash slowly, then turn the washer-dryer off by pressing on-off button H (O position). Now you can open the appliance door. Once you have removed the washing from the appliance, leave the door open or ajar to avoid the formation of bad odours and turn off the water tap.
Fabric type Load type Max. load (kg) Extra dry Cotton, Linen Clothing of different sizes Terry towels Sheets, Shirts Pyjamas, socks, etc. Slips, tights, stockings, etc.

Drying time (Min.)

Wardrobe

Cotton

Terital, Cotton Acrylics
The data contained in the table are purely indicative.
For cotton loads of less than 1 Kg, use the drying programme designed for synthetic fabrics.

WOOL DRYING CYCLE

The woollen garments drying cycle should only and exclusively be run together with the selection of a specific cycle time (150 - 100 - 60 - 40 minutes). We recommend a 60 minute drying cycle for a 1 kg load. If one of the three levels (Extra dry , Wardrobe , Iron ) is selected by mistake, the appliance will run a drying cycle lasting the MAX time foreseen (150 minutes).

IMPORTANT

A spin cycle is carried out during the drying if you have set a cotton programme and a level of dryness (Extra dry , Wardrobe , Iron ).

WARNING

- During the drying phase, the door tends to get quite hot. - Do not use the appliance to dry clothes that have been washed with flammable solvents (e.g. trichlorethylene). - Do not use the appliance to dry foam rubber or similar elastomers. - Make sure that the water tap is turned on during the drying cycles. - This washer-dryer can only be used to dry clothes which have been pre-washed in water.

WOOL CYCLE

For best results, we recommend you use a specific detergent, taking care not to wash more than 1 kg of laundry.
How to wash almost anything
Curtains. Curtains tend to crease a great deal. A useful tip to reduce creasing: fold the curtains and place them in a pillow case or mesh bag. Do not load anything else inside the appliance, this will ensure that the overall weight does not exceed the half load. Remember to use the specific programme 9 which automatically excludes the spin cycle. Quilted coats and anorak. You can wash quilted coats and wind-cheaters, too, if they are padded with goose or duck down. Do not load more than 2-3 kg and never load 5 kg. Repeat rinse once or twice using the gentle spin. Trainers. Once you have removed mud and dirt from trainers, you can even wash them with jeans or any other tough garments. Do not wash trainers with whites.
7 Instructions for installation and use
Its important for a good wash
Useful tips about the detergent dispenser
The first secret is the easiest: the detergent dispenser is opened by pull it outwards.
In compartment 1: Detergent for pre-washing (powder)
You must follow the dosage recommendations provided by the manufacturers when adding detergent or fabric conditioner. Doses will vary according to the wash load, the water hardness and how soiled the washing is. Experience will help you select the right dosage almost automatically: it will become your secret. Before adding detergent for prewashing in compartment 1, make sure that the extra compartment for bleach 4 has not been inserted. Ensure no overfilling when adding fabric conditioner in compartment 3. The washer-dryer automatically adds the softener to the wash in each programme. Liquid detergent is poured into compar tment 2 just a few seconds before starting the wash cycle.
Remember that liquid detergent is only designed for wash cycles of up to 60 degrees on non pre-wash items. Special containers are sold with liquid or powder detergents for placing inside the washer-dryer drum, these are positioned according to the instructions found in the detergent box Never use hand wash detergent, because it may form too much foam, which could damage the washer-dryer. Detergents that are specifically formulated for both hand and machine wash are an exception. One last secret: when washing with cold water, always reduce the amount of detergent you use: it dissolves less easily in cold water than in hot water, so part of it would be wasted.

The washer-dryer continuously fills and drains water.
Is the drain hose positioned too low? It must be installed at a height ranging from 60 to 100 cm. Is the end of the hose immersed in water? Does the wall drainage system have a breather pipe? If the problem persists even after these checks, turn the water supply off the machine and call for assistance. If you live on an upper floor of your building, there may be a problem with your drain trap. To solve this problem, a special valve must be installed.
The programme selector knob keeps turning?
Wait a few minutes for the drain pump to empty the tub, switch the washer-dryer
9 Instructions for installation and use
Is the washer-dryers drain duct clogged? Is there an extension of the drain hose? If so, is it positioned incorrectly, blocking the water flow?
Is there space between the machine and adjacent units? If it is not a built-in model, the washer-dryer will oscillate a bit during the spin cycle. A few cm of space should therefore be left around it.
The washer-dryer does not drain or spin.
Does the selected programme incorporates water draining? Some programmes stop at the end of the wash cycles and draining will have to be selected manually. Is the Easy iron" function -where provided - enabled? This function requires manual selection for draining. Is the drain hose kinked? The tract of the drain hose must be as straight as possible. Make sure the drain hose is not squashed or kinked.

Too much foam.

Is the detergent appropriate for machine washing? Check whether the definition on its label reads for machine wash or hand and machine wash, or any other similar wording.
Excessive vibration during the spin cycle. The washer-dryer leaks.
Have all transit screws been removed durind installation? See the following page on installation procedures. Has the washer-dryer been levelled correctly? The levelling of the appliance should be checked periodically. Adjust the feet and check them with a level. Is the metal ring of the inlet hose properly attached? Turn off the water supply, unplug the appliance and try tightening its attachment without forcing it. Is the detergent dispenser obstructed? Remove and wash it under tap water. Is the drain hose well attached? Turn off the water supply, unplug the appliance and try tightening its attachment.

Is the correct amount being used? An excessive amount of detergent, besides producing too much foam, does not guarantee a more effective wash, and causes scaling in the internal parts of the appliance.
The washer-dryer does not dry.
Check whether: the plug has been correctly inserted into the socket; there is electricity in your home; the appliance door has been shut properly; a delayed start (if available) has not been selected; programme knob A has been set to position (Stop/Reset); the drying cycle knob C has been set to position 0.
Always get assistance from authorised technicians and always insist on original spare parts.
Technical characteristics
Model Dimensions WDE 12 X width 59,5 cm height 81,5 cm depth 54 cm from 1 to 5 kg for the wash programme; from 1 to 4 kg for the drying programme voltage 220/230 Volt 50 Hz maximum absorbed power 1850 W maximum pressure 1 MPa (10 bar) minimum pressure 0,05 MPa (0,5 bar) drum capacity 46 litre up to 1200 rpm wash: programme 3; temperature 60C; carried out with 5 kg load; drying: run with a load of 2.5 kg and knob C et to position. This appliance conforms with the following E.E.C. directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications - 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications
The washer-dryer doesn't dry properly.
Check whether: the end of the drain hose is underwater; the drain pump is obstructed; the advice given on the maximum loads has been taken; the water tap has been turned on. If, despite all checks, the washerdryer fails to function and the problem persists, call your nearest authorised Customer Service Centre, providing the following information: - the nature of malfunction - the model type no. (Mod.) - the serial number (S/N.) This information can be found on the data plate situated at the back of the washer-dryer.
Capacity Electrical connections Water connections
Spinning speed Control programs in compliance with IEC regulation 456
Instructions for installation and use 10

Installation and removal

When the new washerdryer arrives
Whether new or just transported to a new house, installation is extremely important for the correct functioning of your washer-dryer.
After removing the appliance from its packaging, check that it is intact. If in doubt, contact a qualified technician immediately. The inside of the machine is supported, for transportation, by four screws on the back panel. Connection to the water mains Water pressure must range within the values indicated on the data plate on the rear of your washerdryer. If the water pipes are new or left unused, then before connecting the machine run the water until clear to remove debris. Connect the inlet hose to a cold water tap having a BSP thread. Ensure that the rubber sealing washer-dryers are fitted at each end of the inlet hose, with the fitter washer-dryer at the tap end.

Warning! The company denies all liability if and when these norms are not respected. Plastic bags, expanded styrofoam, nails and other packaging parts are not childrens toys, and are potentially dangerous.
11 Instructions for installation and use
Instructions for the fitter
Mounting the wooden panel onto the door and inserting the machine into cabinets: In the case where the machine must be shipped for final installation after the wooden panel has been mounted, we suggest leaving it in its original packaging. The packaging was designed to make it possible to mount the wooden panel onto the machine without removing it completely (see figures below). The wooden panel that covers the face of the machine must not be less than 18 mm in thickness and can be hinged on either the right or left. For the sake of practicality when using the machine, we recommend that the panel be hinged on the same side as the door for the machine itself - the left. Door Mounting Accessories (Fig. 1-2-3-4-5)
N 2 Hinge Supports Fig. 1 Fig. 2

N 2 Hinges

cheria lavabian machine washing laver machine aschine waschm
ta Lato por Door side te Cote por te Tur sei

N 1 Magnet

N 1 Magnet plate Fig. 4

Fig. 3

N 1 Rubber plug Fig. 5 Fig. 4/B

N 1 Spacer

cheria lavabian machine washing laver machine e maschin wasch
ta Lato por Door side te Cote por e Tur seit
- No. 6 type A self-threading screws, l =13 mm. - No. 2 type B metric, countersunk screws, l =25; for fastening the magnet plate to the cabinet. - No. 4 type C metric screws, l =15 mm; for mounting the hinge supports to the cabinet. - No. 4 type D metric screws, l =7 mm; for mounting the hinges on the supports.
Instructions for installation and use 12
Mounting the Parts onto the Face of the Machine - Mount the hinge supports onto the face of the machine, positioning the hole indicated by the arrow in fig. 1 towards the inside of the face and using the type C screws. - Mount the magnetic plate on the opposite side, at the top, using the two type B screws. - Place the spacer illustrated in fig. 4/B between the appliance front and the magnet receiver. Using the Drilling Template - To trace the positions of the holes on the left-hand side of the panel, align the drilling template to the top left side of the panel using the lines traced on the extremities as a reference. - To trace the positions of the holes on the right-hand side of
the panel, align the drilling template to the top right side of the panel. - Use an appropriately sized router to mill the holes for the two hinges, the rubber plug and the magnet. Mounding the Parts onto the Wooden Panel (Door) - Insert the hinges into the holes (the movable part of the hinge must be positioned facing away from the panel) and fasten them with the 4 type A screws. - Insert the magnet into the top hole on the opposite side of the hinges and fasten it with the two type B screws. - Insert the rubber plug into the bottom hole. The panel is now ready to be mounted onto the machine.

Mounting the Panel into the machine Inser t the nib of the hinge (indicated by the arrow in fig. 2) into the hole for the hinge and push the panel towards the front of the machine. Fasten the two hinges with the type D screws. Fastening the plinth guide If the machine is installed at the end of a set of modular cabinets, mount either one or both of the guides for the base molding (as shown in fig. 8). Adjust them for depth based on the position of the base molding, and, if necessary, fasten the base to the guides (fig. 9). This is how to assemble the plinth guide (fig.8):
Fasten angle P using screw R, insert plinth guide Q into the special slot and once it is in the desired position, lock it in place using angle P and screw R. Inserting the machine into the Cabinet - Push the machine into the opening, aligning it with the cabinets (fig. 6). - Regulate the adjustable feet to raise the machine to the appropriate height. - To adjust the position of the wooden panel in both the ver tical and horizontal directions, use the C and D screws, as shown in fig. 7. Important: close the lower part of the appliance front by ensuring that the plinth rests against the floor.

600 min

820 900

Fig. 7 Fig. 8 Fig. 9

Fig. 6
Accessories provided for the height adjustment The following can be found inside the polystyrene lid (fig. 10): 2 crossbars (G), 1 strip (M)

Fig. 10

the following can be found inside the appliance drum: 4 additional feet (H), 4 screws (I), 4 screws (R), 4 nuts (L), 2 plinth guides (Q)
Adjusting the appliance height The height of the appliance can be adjusted (from 815 mm to 835 mm), by turning the 4 feet. Should you require the appliance to be placed higher than the above height, you need to use the following accessories to raise it to up to 870 mm: - the two crossbars (G) - the 4 feet (H) - the 4 screws (I) - the 4 nuts (L) then perform the following operations (fig. 11): remove the 4 original feet, place a crossbar G at the front of the appliance, fastening it in place using screws I (screwing them in where the original feet were) then insert the new feet H.
Repeat the same operation at the back of the appliance. Now adjust feet H to raise or lower the appliance from 835 mm to 870 mm. Once you have reached the desired height, lock nuts L onto crossbar G.
To adjust the appliance to a height between 870 mm and 900 mm, you need to mount strip M, adjusting feet H to the required height. Insert the strip as follows: loosen the three screws N situated at the front of the Top cover of the appliance, insert strip M as shown in fig. 12, then fasten screws N.

Fig. 11

Fig. 12
13 Instructions for installation and use
Easy Care and Maintenance
Treat your machine well and it will provide many years of trouble free service
Your washer-dryer is a reliable companion in life and on the job. It is just as important for you to keep it in shape.
Your washer-dryer is designed to provide reliable service over many years. A few simple steps will help to prolong its life and avoid problems. It is advisable, to turn off water taps when the machine is not to be used, this protects the hoses, etc. If the water in your area is too hard, use a deliming product (water is hard if it often leaves whitish stains around taps or drains, especially of bath tubs. For more accurate information as to the type of water in your system, call the local water works or a local plumber). Pockets must always be emptied removing even pins, badges and any other hard object. The washer-dryer exterior should be cleaned with a rag dipped in lukewarm water and soap.
It is important to wash the detergent dispenser regularly. To prevent dried washing powder from accumulating, place the dispenser under running water for a few minutes.
Never exaggerate with doses. Normal detergents already contain deliming agents. Only if the water is particularly hard, that is, rich in lime content, do we recommend the use of a specific product at every wash. A periodical wash cycle with a dose of a deliming product, without detergents or washing, may prove useful. Never use too much detergent or additives because this could cause an excess amount of foam, scaling and possible damage to the component parts of your washer-dryer.
Do not forget to empty all pockets: small objects can cause damage to your washer-dryer.
When in need, check the pump and the rubber hose.
The washer-dryer comes equipped with a self-cleaning pump that does not require any cleaning or maintenance. The water inlet hose Check the rubber hose at least once a year. If you see any cracks, replace it immediately. When you use your washer-dryer, water pressure is very strong and a cracked tube could easily split open.

Instructions for installation and use 14
Important for the safe use of your washer-dryer
Your safety and that of your family
Read these instructions and all the information in this manual carefully: they are an important source, not only of numerous useful tips, but also of vital information on safety, use and maintenance. 1. the machine should not be installed in an outdoor environment, not even when a roof shelters the area, because it may be very dangerous to leave it exposed to rain and thunderstorms. 2. It must only be used by adults and exclusively for washing clothes following the instructions provided in this manual. 3. Should it have to be moved, proceed with the help of two or three people and handle it with the utmost care. Never try to do this alone, because the appliance is very heavy. 4. Before loading the washerdryer, make sure the drum is empty. 5. Never touch the washerdryer when barefoot or with wet or damp hands or feet. 6. Never use extensions or multiple plugs, which are particularly dangerous in humid environments. The power supply cable must never be bent or dangerously compressed.
I only want an authorised specialised technician with original Indesit spare parts!
Your washer-dryer has been built in compliance with the strictest international safety regulations. To protect you and all your family.
8. Never pull on the supply cable or the washer-dryer to disconnect it from the wall socket: it is extremely dangerous. 9. While the appliance is functioning, do not touch the drain water as it could reach very high temperatures. The appliance door, during wash cycles, tends to become hot; ensure that children do no touch it. Never force the washerdryer door because this could damage the safety lock which prevents accidental opening when the nachine is working. Allow a few minutes at the end of the program for the lock to release. 10. In case of malfunctioning, first close the water tap and unplug the appliance from the wall socket; do not under any circumstances touch internal parts in order to attempt repairs.
7. Never open the detergent dispenser while the appliance is functioning; do not use hand wash detergent because the abundance of foam could damage its internal parts.
How to change the power supply cable
The washing machine power supply cable is special and can be purchased exclusively from authorised Technical Service Centres. To replace the cable: 1. Make sure that the machine is switched off and unplugged. 2. Remove the cover by unscrewing screws I [fig 13]. 3. Disconnect the wires from the radio interference suppressor F [fig. 14] noting as to their position (Blue=N wire; Brown=L wire) leaving the earth wire until last. N.B.: letters L, N and the symbol are indicated on the radio interference suppressor. 4. Remove the screw and washer V [fig. 15], which act as a stop for the cable passageway. 5. Remove the upper part of the cable slightly from the back panel of the appliance, pull the power supply cable upwards and take it out [fig. 16]. To connect the new power supply cable, reverse the procedure. It is important for your safety that you reassemble all parts and screws used.