UPS designed for Small Office & Home Office !
Line Interactive Technology with microprocessor controlled Automatic Voltage Regulation (AVR). Up to 25 mn backup time (depending on the model and connected load) Phone/Fax/modem line protection Cold start feature Energy saving green power feature Automatic restart while AC Power recovery feature Indicating lights and audible alarm Compact design: easy to install and use 2-year warranty CE certificate 8 languages packaging & user guide

photos non binding

XP SoHo 650
Technology Power TECHNOLOGY Output form Protection Power factor PHYSICAL CHARACTERISTICS Dimensions w x d x h Weight kg Output connectors INPUT CHARACTERISTICS OUPUT CHARACTERISTICS (Battery mode) NORMS SALES INFO Voltage Voltage range Voltage Voltage regulation Frequency Security / Standard Gencods EXW France price (mm) VA

XP SoHo 1100

1000 VA
Line Interactive with AVR (Automatic Voltage Regulation)
Modified Sinewave discharge/overcharge/overload protection + phone/fax/modem line protection 0.X 330 X140 6.IEC outlets 2 protected RJ11 connectors. 220 - 230 - 240 V 162- 290 V 220 - 230 - 240 V +/- 10 % 50 or 60 Hz + / - 1 Hz (auto frequency) CE 0.5
Infosec Communication 4, rue de la Rigotire 44700 ORVAULT France
Sales Info: Tl : +commercial@infosec.fr
Copyright 2005 Infosec Communication SA. Infosec UPS System is a trademark of Infosec Communication. All other trademarks are property of their respective owners. Photos not binding. Specifications are subject to change without prior notice.Prices indicated are for information only as each reseller is free to fix its own price policy.

650 XP 500 XP SoHoXP XP SoHo & 1000 XP
User guide __________________________ 2 Instrukcja obsugi ____________________ 9 Notice d'utilisation __________________ 16 Gua de usuario _____________________ 23 ___________________ 30 Manual do Utilizador ________________ 37 __________ 44
15 _________________________

User guide

To ensure this product is correctly installed and used in the right way, we highly advise you to read this user guide very carefully. 1. INTRODUCTION This UPS range is specially designed for multimedia Personal Computers. Its light weight and compact design suit limited working environments. The XP range of UPS is equipped with boost and buck AVR to stabilize input voltage. It also has a built-in DC start function. This function enables the UPS to be started up without an AC power supply. The main features of XP UPS are listed below. 2. MAIN CHARACTERISTICS Microprocessor control guarantees high reliability Equipped with boost and buck AVR Green Power Function for energy saving DC Start Function Auto restart during AC recovery Compact size, lightweight Provides modem / phone line surge protection
3. SAFETY INSTRUCTIONS Security The UPS unit uses potentially hazardous voltages. Do not take this equipment apart. It does not contain accessible components that can be repaired by users. All repairs should be performed by qualified technicians only. The UPS has its own internal power supply (battery). There is a risk that output sockets may still be live after the UPS has been disconnected from the mains power supply. The UPS has been designed for power computers. It should not be used with power electronic equipment with inductive loads such as motors or fluorescent lights. Do not connect any non-computer units to the UPS, such as medical equipment for artificial life handling, microwave, vacuum cleaner, etc. Laser printers should not be connected to the UPS as they consume too much power. Make sure that the power supply required does not exceed the capacity of the UPS. We recommend using an optimum power load equivalent to half or one third of the nominal power for longer backup time and battery life. Do not leave any container with liquid on the UPS or close to it. Unplug the UPS before proceeding to cleaning it. Do not directly apply any liquid detergent or sprays. The UPS should not be used in a damp place, nor exposed to direct sunlight or heatemitting sources. Do not cover the ventilation slots. In case of emergency, switch the UPS to the OFF position and then unplug the power cord from the power socket to disable the UPS completely. Should the UPS fail to operate correctly, please refer to section 10: Trouble Shooting.
INFOSEC UPS SYSTEM - 4, rue de la Rigotire 44700 Orvault FRANCE - www.infosec.fr Hot Line : tel : + 33 (0)82 - fax : + 33 (0)51 - hotline@infosec.fr 02
4. STORAGE INSTRUCTIONS The UPS should be stored with its battery fully recharged. Storage temperatures above 20C should be avoided as this will significantly shorten battery life. The UPS should be recharged once every 3 months. This is done by leaving it connected to the mains power supply for 24 hours. Batteries kept in storage should be recharged every 3 months, failure to do so could result in battery damage. 5. AFTER SALES SERVICE IMPORTANT! When calling the After-Sales Department, please have the following information ready, it will be required regardless of the problem: UPS model, serial number and date of purchase. Accurate description of the problem providing the following details: type of equipment powered by the UPS, indicator led status, alarm status, installation and environmental conditions. You will find the technical information you require on your guarantee or on the identification plate on the back of the unit. If convenient you may enter the details in the following box.

Model XP SoHo

Serial number

Date of purchase

! Please keep the original packaging. It will be required in the event the USP is returned to the After-Sales Department.
IMPORTANT : UPS are part of electronic and electric equipments category. At the end of their lives, they have to be collected separately.

6. DESCRIPTION

FRONT PANEL
On / Off switch Lighting green led : AC mode Flashing green led : Battery mode

BACK PANEL

RJ11 Telephone/Fax/Internet protected outlets 3 UPS protected outlets Input outlet Fuse

FUSE REPLACEMENT

Insert a screwdriver in the slot to open the slide

AC input socket Fuse

Protection fuse position Replacement fuse

7. INST ALL ATION AND OPERATION 1. Checking When you receive your equipment, open the packaging and check that your UPS has not been damaged. The packaging includes: a UPS unit, 2 IEC output cables and a user guide. In the event of damage, please submit a standard claim to the after-sales service department. 2. Charging the batteries This unit is shipped from the factory with its internal battery fully charged, however, some charge may be lost during shipping and the battery should be recharged prior to use. Plug the unit into an appropriate power supply and allow the UPS to charge fully by leaving it plugged-in, with no load, for at least 8 hours. 3. Where to set up The UPS has been designed to operate in a protected environment, at temperatures between 0C and 40C and at a humidity level ranging between 0% and 90% (no condensation). Do not obstruct the ventilation slots. Install the unit in an environment which is free from dust, chemical vapours and conductors. Moreover, in order to avoid any interference, keep the UPS at least 20cm away from the CPU (central processing unit). 4. Connection Check on the identification plate at the back of the UPS that the power supply is compatible with network voltage and that the device is powerful enough to protect the given power load. Plug the UPS into a 2-pole, earthed outlet (use the original power cable of your computer or it is recommended to use a power cable 2P+E/CEE22/10A). Then, use the 2 IEC cables to connect one computer-related device to each of the power outlets supplied on the back of the UPS. You can also connect a device that does not require backup time, such as a printer, to the surge protected and filtered outlet. 5. On/Off To turn the UPS unit on, lightly press the power switch. To turn it off, press the power switch again. 6. DC Start XP units are equipped with an integrated DC start function. To start the UPS in the absence of a power supply and with a full battery, press the button. 7. Power Saving Function XP range is equipped with a Power Saving Function. If no load connects to the UPS, it will automatically shut down after 5 minutes to save energy during a power failure. The Power switch must be kept in the ON position, otherwise, the UPS will be disabled and your equipment will not be protected during a power failure.

8. PROTECTION TELEPHONE/FAX/MODEM LINE If you wish to protect a fax or a modem, connect the telephone cable from the wall outlet to the IN jack. Connect the telephone cable (provided) from the OUT jack to the fax or modem. Caution: The telephone line lightning arrester could be rendered inoperable if improperly installed. This surge protection device is for indoor use only. Never install telephone wiring during a lightning storm. Note: This connection is optional. It is not necessary to use this UPS. 9. BATTERY The battery is the only UPS component which is not in permanent use. It has a useful life of approximately 3 to 5 years. However, frequent major discharges or exposure to temperatures over 20C will shorten its life span. We therefore recommend that users recharge the battery once every 3 months when the unit is not in use in order to compensate for natural discharging. UPS backup time will depend on the powered load, as well as the age and condition of the batteries. WARNING! Batteries should always be replaced by qualified technicians. Batteries have a very high short circuit current: connection errors could cause electric arcs resulting in serious burns. 10. TROUBLE SHOOTING Should the UPS fail to function correctly we recommend you perform the following tests before calling the Hot Line. Check list: Is the main switch in the ON position? Is the UPS plugged into the mains power supply? Does the power supply fall within specified unit values? Has the fuse gone in the mains plug? Is the UPS overloaded? Is the battery flat or defective?

SYMPTOM

POSSIBLE CAUSE

1. Battery missing.

SOLUTIONS
1. Charge battery up to 8 hours. 2. Replace with the same type of battery. 3. Press and Hold power switch for at least 5 seconds. 1. Verify that the load matches the UPS capability stipulated in the specifications. 1. Remove some non-critical load. 2. Recharge the battery by plugging the UPS in for 24 hours.
No LED display on the front panel.

2. Faulty battery.

3. Power switch was not pressed for at least 5 seconds. Alarm buzzer beeps every second when AC supply is normal.

1. UPS overload.

1. UPS overload or the connected equipment is defective.
In the event of power failure, reduced backup time.

2. Flat battery.

3. Battery defect due to high temperature operation environment, or improper operation to battery.
3. Replace with the same type of battery.
1. Blown fuse. Mains normal but LED is flashing and beeping.
1. Replace the same type of fuse. 2. Reconnect the power cord properly. 3. Check the power supply
2. Power cord is loose. 3. No mains power supply or UPS is not on.
11. TECHNICAL SPECIFICATIONS

650 XP SoHo

Technology Output form TECHNOLOGY Protection Power Power factor Dimensions W x D x H PHYSICAL Weight kg Output connectors Voltage INPUT Voltage range Frequency Voltage OUTPUT Regulation Frequency Type BATTERY Backup time