to 10 kVA

/ 10 to 20 kVA (STM)
On Line Double Conversion UPS, parallel redundancy, dedicated to critical applications requiring clean & continuous power.
TECHNOLOGY On Line Double Conversion High Frequency micro processor
controlled technology. High-end protection against surge, overload, shortcuts & overheats.
GENERAL CHARACTERISTICS Wide input voltage window (110-300 VAC) Input power factor correction 0.8 output power factor 3 operation modes : Normal, Eco, frequency converter Emergency Power Off Programmable power management outlets Generator compatible Up to 2-stage smart charger design and temperature compensation
features optimizing recharge time and battery life. Tel/Fax/Modem or Ethernet protection Communication port (possible simultaneous access) RS 232 & USB Integrated SNMP Slot Automatic self testing system while UPS is turned on. Cold start feature & turn on UPS without battery when connected to the mains. Also available in long autonomy version + from E4 LCD 5000 and higher models: DSP Technology Maintenance bypass Efficient battery charging system thanks to intelligent 3step external charger Redundancy parallel up to 3 UPS Adjustable battery number Active power factor correction in all phases for 3 phasein/1 phase out 10kVA to 20 kVA. Active PFC improves power quality and increase the energy efficiency.

Pictures not binding

OPTIONS Battery Bank extensions SNMP agent for remote management from the web or network. External maintenance bypass switch Charger capacity expansion up to 8A for long-run models DESIGN Compact and useful design (optimized footprint) LCD screen(55 x 27.5mm) 3-button control panel (on/off; mode, voltage & programmable

outlet settings)

WARRANTY/CERTIFICATE/USER GUIDE 2-year warranty CE certificate. English & French users guide
Infosec Communication 4, rue de la Rigotire 44700 ORVAULT - France
Contact Commercial: Tl : +commercial@infosec.fr

E4 LCD GB 09

2008 Infosec Communication SA. Infosec UPS System is a trademark of Infosec Communication. All other trademarks are property of their respective owners. Photos not binding. Specifications are subject to change without prior notice.Prices indicated are for information only as each reseller is free to fix its own price policy.
E4 LCD 1000 (S) 1000 VA INPUT Battery mode transfer Low Voltage Range
(based on load percentage 100-80%/80%-70%/7060%/60%-0)

E4 LCD 1500 (S) 1500 VA

E4 LCD 2000 (S) 2000 VA

E4 LCD 3000 (S) 3000 VA

E4 LCD 5000 (S) 5000 VA

E4 LCD 6000 (S) 6000 VA

E4 LCD 10k (S) 10000 VA
110 V 230 V 110 V 230 V 110 V 230 V 110 V 230 V
80 VAC / 70 VAC / 60 VAC / 50 VAC 5 % 160 VAC / 140 VAC / 120 VAC / 110 VAC 5 % 85 VAC 5 % 175 VAC 5 % 150 VAC 5 % 300 VAC 5 % 145 VAC 5 % 290 VAC 5 % 47.5Hz ~ 52.5 Hz or 57Hz ~ 63 Hz Single phase with ground 0.VAC 46~54 Hz 50Hz / 56~64 Hz 60Hz Single phase with ground 0.99 @ 100%load 300 VAC 176 VAC @ 100% load 110 VAC @ 50% load 176 VAC @ 100% load 110 VAC @ 50% load
Low line comeback Battery mode transfer High line comeback Frequency Range Phase Power Factor OUTPUT Voltage AC Voltage Regulation (Batt. Mode) Frequency Range (Synchronized Range) Frequency Range (Batt. Mode) Current Crest Ratio Harmonic Distortion Transfer Time AC Mode to Batt. Mode Inverter to Bypass Waveform (Batt. Mode) EFFICIENCY AC Mode Battery Mode BATTERY Battery Type Numbers Standard Model Typical Recharge Time Charging Current (max.) Charging Voltage Long-run Model (S) Battery Type & Number Charging Current (max.) Charging Voltage INDICATORS LCD Panel ALARM Battery Mode Low Battery Overload Fault PHYSICAL Standard Model Long-run Model

High Voltage Range

230 V (or 110 V pour Nema version) 3% 48 ~ 52 Hz or 57 ~ 63 Hz 50 Hz 0.25 Hz or 60Hz 0.3 Hz 3:% THD (Linear Load), 6 % THD (Non-linear Load) 4 % THD (Linear Load) 7 % THD (Non-linear Load)
230 V 1% 46~54 Hz 50 Hz / 56~64 Hz 60 Hz 50 Hz 0.1 Hz or 60 Hz 0.1 Hz 3:% THD (Linear Load) 6 % THD (Non-Linear Load) Zero Zero Pure Sinewave
Zero 4 ms (Typical) Pure Sinewave

~ 85% ~ 83%

90% 88%

12 V / 7 AH 3

12 V / 9 AH 3

12 V / 7 AH 6

12 V / 9 AH 6
12 V / 7 AH hours recover to 90% capacity 1.0 A
12 V / 9 AH hours recover to 90% capacity
4 hours recover to 90% capacity 1.0 A 41.0 VDC 1% 82.1 VDC 1%

273.0 VDC

Depending on the capacity of external batteries 8.0 A 41.0 VDC 1% 82.1 VDC 1% 4.0 A 273.0 VDC
UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions
Sounding every 4 seconds Sounding every second Sounding twice every second Continuously sounding
Dimension, D X W X H (mm) Net Weight (kgs) Dimension, D X W X H (mm) Net Weight (kgs)
397 X 145 X 220 13,2 13,6
421 X 190 X 318 28,1 28,5
592 X 250 X 592 X 250 X 24 83

397 X 145 X 220 6,9 6,9

421 X 190 X 13
ENVIRONMENT Operation Humidity Noise Level MANAGEMENT Smart RS-232/USB Optional SNMP Supports Windows family, Novell, Linux and FreeBSD Power management from SNMP manager and web browser 20-90 % RH @ 0- 40C (non-condensing) Less than 45dB @ 1 Meter Less than 55dB @ 1 Meter
E4 LCD STM 10k 10 kVA INPUT Voltage Battery mode transfer Low Voltage Range Low line comeback High Voltage Range Frequency Range Phase Power Factor OUTPUT Voltage AC Voltage Regulation (Batt. Mode) Frequency Range (Synchronized Range) Frequency Range (Batt. Mode) Current Crest Ratio Harmonic Distortion AC Mode to Batt. Mode Inverter to Bypass Battery mode transfer High line comeback

E4 LCD STM 15k 15 kVA

E4 LCD STM 20k 20 kVA
3 x 400 V + Neutral 176 VAC (phase voltage) @ 100% load 110 VAC (phase voltage) @ 50% load 186 VAC (phase voltage) @ 100% load 120 VAC (phase voltage) @ 50% load 300 VAC (phase voltage) 290 VAC (phase voltage) 46~54 Hz 50Hz / 56~64 Hz 60Hz 3-phase with neutral and ground 0.99 @ 100%load
230 V 1% 46~54 Hz 50 Hz / 56~64 Hz 60 Hz 50 Hz 0.1 Hz or 60 Hz 0.1 Hz 3:% THD (Linear Load) 6 % THD (Non Linear Load) Zero Zero Pure Sinewave

Transfer Time

Waveform (Batt. Mode) EFFICIENCY AC Mode Battery Mode BATTERY Battery Type Numbers Standard Model Typical Recharge Time Charging Current (max.) Charging Voltage Battery Type & Number Long-run Model (S) Charging Current (max.) Charging Voltage INDICATORS LCD Panel ALARM Battery Mode Low Battery Overload Fault PHYSICAL Standard Model Dimension, D X W X H (mm) Net Weight (kgs) Long-run Model ENVIRONMENT Operation Humidity Noise Level MANAGEMENT Smart RS-232/USB Optional SNMP Dimension, D X W X H (mm) Net Weight (kgs) 592 X 250 X 592 X 250 X 4A 1A 20

12 V / 9 AH hours recover to 90% capacity 2A 273.0 VDC Depending on the capacity of external batteries 8A 273.0 VDC 8A 2A 40
862 X 250 X 592 X 250 X 576 37
20-90 % RH @ 0- 40C (non-condensing) Less than 55dB @ 1 Meter
Supports Windows family, Novell, Linux and FreeBSD Power management from SNMP manager and web browser

TECHNICAL SPECIFICATIONS

E4 LCD 1000 (S) GENERAL SPECIFICATIONS Technology Power INPUT Battery mode transfer 110 V 80 VAC / 70 VAC / 60 VAC / 50 VAC 5 % 160 VAC / 140 VAC / 120 VAC / 110 VAC 5 % 85 VAC 5 % 175 VAC 5 % 150 VAC 5 % 300 VAC 5 % 145 VAC 5 % 290 VAC 5 % 40Hz~70Hz Single phase with ground 0.V (or 110V for NEMA models) 3% 47.5~52.5 Hz or 57~63 Hz 50 Hz 0.25 Hz or 60 Hz 0.3 Hz 3:% THD (Linear Load) 6 % THD (Non Linear Load) AC Mode to Batt. Mode Inverter to Bypass Waveform (Batt. Mode) Output outlets IEC 10A (or NEMA 110V) standards / program Output terminal standard / programmable EFFICIENCY AC Mode Battery Mode BATTERY Battery Type Numbers Standard Model Typical Recharge Time Charging Current (max.) Charging Voltage Battery Type & Number Long-run Model (S) Charging Current (max.) Charging Voltage INDICATORS LCD Panel ALARM Battery Mode Low Battery Overload Fault Bypass mode PHYSICAL Standard Model Long-run Model 576 x 250 x 592 Operation Humidity Noise Level MANAGEMENT / COMMUNICATION Smart RS-232/USB Optional SNMP Dry contacts Software NORMS Standard EMC Low voltage (Safety) SALES INFO Warranty Package content Standard versions gencods Extended backup time versions gencods 2 years 1 input powercord, 2 IEC output powercords, RS232 cable, USB cable, user guide, software RS232 cable, USB cable, user guide, software CE EN62040-2 (EN61000-4-2 - EN61000-4-3 - EN61000-4-4 - EN61000-4-5 - EN61000-4-6 - EN61000-4-8 - EN61000-4-11 - EN61000-2-2) EN62040-1-1 Supports Windows family, Novell, Linux and FreeBSD Power management from SNMP manager and web browser Dry contacts communication card for remote alarm InfoPower 20-90 % RH @ 0- 40C (non-condensing) Less than 45dB @ 1 Meter Dimensions H x W x D (mm) Net Weight (kgs) Dimensions H x W x D (mm) Net Weight (kgs) 6,9 13,x 145 x 397 6,220 x 145 x x 190 x x 190 x 421 28,576 x 250 x 576 x 250 x Sounding every 4 seconds Sounding every second Sounding twice every second Continuously sounding Sounding every 10 seconds UPS status, Load level, Battery level, Input/Output voltage, Discharge timer and Fault conditions 41.0 VDC 1% 8,0 A (max.) 82,1 VDC 1% 41.0 VDC 1% 12 V / 7 AH V / 9 AH V / 7 AH V / 9 AH V / 7 AH hours recover to 90% capacity 1,0 A 82,1 VDC 1% Depending on the capacity of external batteries 4,0 A 273 VDC 273 VDC 12 V / 9 AH hours recover to 90% capacity ~ 85 % ~ 83 % ~ 88 % 89% 88% 2/2 2/2 Zero 4ms (Typical) Pure Sinewave 4/4 3/3 yes / no 2/0 yes / yes 4 % THD (Linear Load) 7 % THD (Non Linear Load) 176 VAC @ 100% load 110 VAC @ 50% load 186 VAC @ 100% load 120 VAC @ 50% load 300 VAC 290 VAC 46~54 Hz 50Hz / 56~64 Hz 60Hz Single phase with ground 0.99 @ 100% load 230 V 1% 46~54 Hz 50Hz / 56~64 Hz 60Hz 50 Hz 0.1 Hz or 60 Hz 0.1 Hz 3:1 max 2 % THD (Linear Load) 6 % THD (Non Linear Load) Zero Zero Pure Sinewave 2/0 yes / yes 2/0 yes / yes
(based on load percentage: 100-80%/80%-70%/70%-60%/60%230 V 0)

E4 LCD 1500 (S)

E4 LCD 2000 (S)

E4 LCD 3000 (S)

E4 LCD 5000 (S)

E4 LCD 6000 (S)

E4 LCD 10k (S)
"True" On Line Double Conversion High Frequency 1000 VA 800 W 1500 VA 1200 W 2000 VA 1600 W 3000 VA 2400 W 5000 VA 4000 W 6000 VA 4800 W 10000 VA 8000 W

Low Voltage Range

110 V Low line comeback 230 V 110 V 230 V High line comeback Frequency Range Phase Power factor OUTPUT Voltage AC Voltage Regulation (Batt. Mode) Frequency Range (Synchronized Range) Frequency Range (Batt. Mode) Current Crest Ratio Harmonic Distortion 110 V 230 V
Battery mode transfer High Voltage Range

Transfer Time

4 hours recover to 90% capacity (Typical) 1,0 A (max.)