Using your camera

Basic operation
To turn your camera on and off: 1 Press Power to turn your camera on in REC mode. The power turns on, the lens extends, and the power indicator LED turns green.
To change the LCD monitor configuration: Press SET/DISP repeatedly to change the configuration. REC mode
- OR Press Playback to turn your camera on in PLAYBACK mode. The power turns on and an image displays on the LCD. 2 Press Power again to turn your camera off. The power turns off, the lens retracts, and the power indicator LED turns off.
Tips To turn your camera on without the startup and operating sound, press and hold Power or Playback for 1.5 seconds. Note To save battery power, the LCD turns off automatically after one minute of inactivity (no button pressed). To turn the LCD back on, press any button other than Power. You can change the power save settings in the Setup menu (see Using the Setup menu on page 10). After power save has been active for one minute, your camera turns off completely. Press Power or Playback to turn your camera back on. Power save does not turn the camera off in the following situations: You are recording or playing movie clips or audio files. You are playing a slide show. You are connecting the camera to a computer or printer with the USB cable.
Note You cannot change the LCD configuration in the following situations: The camera is set to manual exposure. You are recording or playing movie clips or audio files. You are playing a slide show. You are viewing thumbnail images. You are trimming a still image.

Changing the mode

You can record images and voices in record mode and you can use the playback mode to replay, delete, or edit images on the LCD monitor.

Scene mode

Portrait
Blurs the background and focuses on the subject. For wide, scenic photos. Enhances the red hue for recording sunset images. Lets you photograph a backlit image.
Landscape Sunset Backlight

Smile capture

Sets the camera to help capture the subjects smile. Lets you take a still image of moving children. Lets you photograph a subject and capture the background at night. Slows the shutter speed to capture fireworks exploding. We recommend that you use a tripod for this. Lets you take beach or snow scenes.

Night scene

To switch between modes: In REC mode, press Playback to switch to playback mode. In playback mode, press Playback or Mode to switch to record mode.

Fireworks

Selecting the REC scene mode
To select the record scene mode: 1 Turn on your camera and set it to REC mode. 2 Press Mode to display the scene mode palette. The scene mode palette opens.
Food Uses a higher color saturation to enhance the look of food. Sharpens the image to enhance the edges of the subject. Increases black and white contrast.

Setup menu

Sounds
Menu item Available settings
Lets you set the sounds that the camera makes. ShutterTurns the shutter sound on or off. StartupSets the startup sound. BeepTurns the operation sound on and off. VolumeAdjusts the volume of the shutter sound, startup sound, beep, and playback sound. Lets you set the time that you can review the photos you have taken. OffThe captured image does not automatically display after shooting. 1 sec.The captured image displays for 1 second after shooting. 3 sec.The captured image displays for 3 seconds after shooting. 5 sec.The captured image displays for 5 seconds after shooting. Lets you set the time that the camera is idle before it turn off automatically to save power. 1 min. 3 min. 5 min. (Does not activate in some situations. See the note on page 9.) Lets you set the date and time. See Setting the date stamp on page 18. Lets you select a language for display menus and other information from the following languages: English, Spanish, and French. Lets you restart numbering if you see a Folder cannot be created error. SeriesStores the latest used file number whether deleting files or inserting a new memory card. ResetResets file numbering each time the memory card is changed. Resetting the file number is useful for avoiding file name duplication when images are downloaded to a computer. (see File naming on page 24). Lets you view camera images on a television with the supplied AV cable. TV Out should be set to either NTSC or PAL, depending on your region. NTSCAmerica, Japan, and others PALEurope, Oceania, and others Lets you set the USB mode to connect the camera to a printer or a computer (See Making connections on page 22). Computer Printer Lets you select a recorded image as the startup image. (See Choosing a startup image on page 22.) Lets you erase all data stored on a memory card, if you are using a card, or all data stored in the internal memory, if there is no card inserted. A BUSY.PLEASE WAIT message displays when the format begins. A COMPLETED message displays when the formatting is completed. Caution: All data will be deleted, including protected files. Make sure that you download important files to your computer before formatting. Battery Type
Lets you set the battery type to make sure that the camera displays the battery level correctly. Alkaline NiMH Lithium Oxide Lets you reset the entire menu and button operation settings to initial default settings. The following settings do not change: Date & Time Language TV Out Battery Type

Reset All

Auto Review

Basic picture taking

Taking still pictures
To take still pictures: 1 Press Power to turn your camera on in record mode. Power turns on, the lens extends, and the power indicator LED turns green. 2 Compose the photo on the LCD. 3 Press the shutter button half way to focus the image.

Power Save

Date & Time Language

File No.

TV Out
The focus area turns green when in focus, and the shutter speed , aperture value and ISO value are displayed. If the shutter speed is too slow, the image may be blurred. In that situation the shake warning icon appears on the LCD monitor. To avoid a blurred photo, use a tripod to stabilize the camera.

S. Image

Format
Insignia NS-DSC7B-09, NS-DSC7P-09, or NS-DSC7S-Megapixel Digital Camera 4 Press the shutter button to take the photo. These settings are pre-set and cannot be changed in Q mode: Setting type Pre-set to.
Quality: S.Fine Highlight: Off Metering: Multi Sharpness: Normal White balance: Auto Effect: Off ISO: Auto Date Stamp: Date & Time Exposure: Auto Digital Zoom: Off AEB: Off Shutter sound File No. Startup sound TV out Power save USB Date & Time Startup image Utility setting Language
Note: These settings are fixed in Q mode.
Make sure that your fingers or the wrist strap do not block the lens.

Utility

Note: These settings are carried over from the last mode used.

Using Q mode

Q mode provides a simplified camera interface for beginners and those who prefer less complexity. Larger icons and fewer controls make it easier to take photos.
Setting image size and quality
You can select lower image resolution and quality to decrease the image size so you can take more photos before running out of memory.

Resolution values

Image size

3072 1728

Print size (from largest to smallest)
Larger than letter size (8.5 x 11 inches)
You can use only these basic settings in the Q mode: Interface Available settings
FlashAuto, Red eye, Force on, Slow sync, and Force off Button MacroOff or On SET/DISPOSD on, Guide line, or OSD off Resolution7M, 3:2, 16:9, 5M, 3M, 1M, or VGA Drive ModeOff, 2 sec., 10 sec., Double, or Burst StabilizerOff or On Menu Face TrackingOff or On Photo FrameYou can only select 10 frames BeepOff or On Auto ReviewOff, 1 sec., 3 sec., or 5 sec.

Note The larger the aperture value, the smaller the lens opening, allowing less light to enter the camera.
Using the shutter priority setting
In this mode you can set a shutter speed to match the conditions. Faster shutter speeds let you take sharp photos of moving subjects, while slower speeds create a trail effect and let you shoot without a flash in dark areas. To use the shutter priority setting: 1 Press Power to turn your camera on in record mode. The power turns on, the lens extends, and the power indicator LED turns green. 2 Press the ASM button to toggle between ASM modes. Stop when the shutter speed is shown.
3 Press SET to switch between the aperture and shutter speed settings, then press or to adjust the setting. 4 Press the shutter button to take the photo. If you press the shutter button halfway, the difference between the standard exposure and the selected exposure appears in red.

Taking movie clips

To take movie clips: 1 Press Power to turn your camera on in record mode. The power turns on, the lens extends, and the power indicator LED turns green. 2 Press the MODE button. The mode palette opens. 3 Press , , , or to select the Movie icon , then press SET to confirm your choice. 4 Aim the focus area at the subject that you want to record. The LCD shows the recording time available.
3 Press or to select the shutter speed you want. The aperture automatically adjusts itself for the best photo. 4 Press the shutter button to take the photo.
Insignia NS-DSC7B-09, NS-DSC7P-09, or NS-DSC7S-Megapixel Digital Camera 5 Press the shutter button to start recording. 4 Press to start playback. 5 Press to stop the audio clip, or press pause the clip. When the audio clip is paused, press to resume playback.

Recording a voice memo

You can add a voice memo to a still photo after you take the photo. To record a voice memo: 1 Press Power to turn your camera on in record mode. The power turns on, the lens extends, and the power indicator LED turns green. 2 Press the playback button to switch to playback mode. 3 Press or to select the still image to which you want to add a voice memo. If the image already has a voice memo recorded, the audio clip icon appears on the LCD monitor. If you continue to record a voice memo, the new memo replaces the existing one. 4 Press MENU. The Playback menu opens.

6 Press the zoom button to adjust the image size. The white balance is set and locked to the settings of the first frame. 7 Press the shutter button again to stop recording. The camera stops recording automatically when the memory capacity is reached.
Note You cannot record sound while pressing the zoom button. The digital zoom cannot be used in Movie mode.

Setting the movie size

16:240 Lower

Frame rate

30 frames/sec.

Higher

Recording and playing back audio clips
To record audio clips: 1 Press Power to turn your camera on in record mode. The power turns on, the lens extends, and the power indicator LED turns green. 2 Press the MODE button. The mode palette opens. 3 Press , , , or to select the Voice REC icon , then press SET to confirm your choice. 4 Press the shutter button to begin recording. Voices are recorded by the cameras built-in microphone. Make sure that you do not touch the microphone while recording. 5 Press the shutter button again to end the recording. The camera stops recording automatically when the memory capacity has been reached. To play back audio clips: 1 Press Power to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press or to select the audio clip you want to play back. 5 Press , , , or to select the Voice Memo icon , then press SET to confirm your choice. 6 Press SET to start recording your voice memo (for up to 30 seconds). Press SET again to end the recording.
Note You cannot add a voice memo to a movie clip or a protected image. You cannot delete only the voice memo. The voice memo is deleted when the image is deleted.
To play back a voice memo: 1 Press Power to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press or to select the image that has the voice memo attached. 4 Press to start playback. 5 Press to stop the voice memo, or press to pause the memo. When the voice memo is paused, press to resume playback.

Changing other settings

These settings can be made or changed on the REC menu. See Using the REC menu on page 10.
Tip Higher ISO speeds increase the image noise. To take clean images, use as low an ISO speed as possible.

Setting the metering

Three different light metering options are available on your camera. Option Description
Light is measured across the entire photo, but more importance is given to the values near the center of the photo. Selects an exposure, based on readings from multiple points in the photo. Selects an exposure based on a single reading taken from the center of your photo.

Setting the exposure

Set the exposure value manually to compensate for unusual lighting conditions such as indirect indoor lighting, dark backgrounds, and strong backlighting.
Setting the AEB (auto exposure bracketing)
Sets the auto exposure bracketing (AEB) setting to shoot three continuous images, each with a different exposure setting: correctly exposed, underexposed, and overexposed.

Sets the ISO sensitivity automatically Sets the sensitivity to ISO 50 equivalent Sets the sensitivity to ISO 100 equivalent Sets the sensitivity to ISO 200 equivalent Sets the sensitivity to ISO 400 equivalent Sets the sensitivity to ISO 800 equivalent Sets the sensitivity to ISO 1600 equivalent

Setting the date stamp

You can use the date stamp to add a date to your photos as you take them. Option

Off Date Date & Time

2 Press the playback button to switch to playback mode.
No date or time stamp is added to your photos Only a date stamp is added to your photos A date and time stamp is added to your photos

Setting the stabilizer

Increases sensitivity (ISO) and shutter speed to brighten up your photos, effectively preventing blurred images caused by hand shake or subject movement. 3 Press the MENU button , then press , , , or to select Slide Show and press the SET button to confirm. 4 Press , , , or to set the slide show interval (1~10 seconds), effect , and repeat options. to start the slide 5 Press the SET button show. During the slide show, press the SET button to pause the show, then press the SET button again to resume.

Setting face tracking

When you turn on face tracking, the lens locks onto the main subject in the photo and follows their movements. Also use auto digital zoom technology to retract and extend the zoom lens that lets you become the focus of lens.
Tips Pressing the shutter halfway down. If the AF area shows green, focus is complete. Face tracking is powered by Arcsoft. Under some environmental influences, face tracking may be limited. Highlight and photo frame cannot be used when using face tracking.

Playing movie clips

To play movie clips: 1 Press Power to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press or to select the movie clip you want to play. 4 Press to start playback. 5 Press to stop the audio clip, or press to pause the clip. When the audio clip is paused, press to resume playback.
Tips During playback, press to rewind the movie, or press to fast forward. Press the shutter button to capture a still photo from the movie clip while it is paused.
Using custom photo frames
You can add 10 different frames to still images to make them more interesting.
Tips This feature is only available with still images (except 3:2 and 16:9). Highlight and face tracking cannot be used when you use the a photo frame.

Viewing photos and video

Viewing photos
To view photos: 1 Press Power to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. The latest recorded photo appears on the LCD monitor. If no photos are stored, No image appears. 3 Press or to cycle through the available photos. Pressing displays the previous photo and pressing displays the next photo.
Tip Holding down at high speed. or scrolls through the photos

Viewing thumbnails

To view thumbnails: 1 Press Power to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press the zoom button (W). The Thumbnail screen opens.

Playing a slide show

To play a slide show: 1 Press Power to turn your camera on in record mode.
Insignia NS-DSC7B-09, NS-DSC7P-09, or NS-DSC7S-Megapixel Digital Camera 4 Press , , , or to select the photo you want, then press T or the SET button to view the photo in full screen.
Tip You can protect or delete multiple photos in the Thumbnail screen. See Editing your photos on page 19.

Editing your photos

Rotating still photos
To rotate a photo: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press or to select the photo you want to rotate.
3 Press or to select the photo to which you want to add the special effects. 4 Press the MENU button, then press , , , or to select Photo Edit and press SET to confirm. 5 Press or to select an effects option, then press SET again to finish. The edited photo is saved as a new file. To add a photo frame to a photo: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press or to select the photo to which you want to add the photo frame. 4 Press the MENU button, then press , , , or to select Photo Frame and press SET to confirm. 5 Press or to select the frame you want, then press SET again to finish. The edited photo is saved as a new file.
Magnifying or trimming still photos
To modify or trim a still photo: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press or to select the photo you want to magnify or trim. 4 Press the MENU button, then press , , , or to select Rotate and press SET to confirm. 5 Press SET to rotate the photo. Each press rotates the photo 90 clockwise. 6 Press or to select OK, then press SET again to finishing rotating. To resize a photo: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press or to select the photo you want to resize. 4 Press the MENU button, then press , , , or to select Resize and press SET to confirm. 5 Press or to select a size option, then press SET again to finishing resizing. The resized photo is saved as a new file.

Tip Resizing can decrease (not increase) the size of a photo.
4 Press T to magnify the photo. The photo is magnified and center area of the photo is shown. Press , , , or to view different parts of the photo, then press the MENU button to return the photo to normal size. - OR Press the SET button to begin trimming, then press the SET button again to trim the selected photo and save it as a new file.
Copying, deleting, and protecting files

Copying files

You can copy the files from the cameras internal memory to a memory card. Make sure that you have inserted a memory card into your camera (see Installing the memory card on page 5).
To add special effects to a photo: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode.
Insignia NS-DSC7B-09, NS-DSC7P-09, or NS-DSC7S-Megapixel Digital Camera To copy a file: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press or to select the photo you want to rotate. 6 Repeat Step 5 to delete additional photos.
Tip To quickly delete the currently displayed photo, press Delete , then press SET to confirm. Protected photos cannot be deleted in this way.
To delete multiple files: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press ZOOM (W), the Thumbnail screen opens. 4 Press the MENU button, then press , , , or to select Delete and press SET to confirm.
4 Press the MENU button, then press , , , or to select Copy to card and press SET to confirm. 5 Press or to choose Single, then press SET to confirm. If you want to copy all of the photos in the camera, select All. 6 Press or to select the photo you want to copy to the memory card, then select Yes and press SET to start the copy. 7 Repeat Step 6 to copy additional photos. 8 Press the MENU button to finish and exit the menu.

Deleting files

To delete single files: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode.
5 Press or to highlight Select, then press SET to confirm. The frame of the selected photo turns green. 6 Press , , , or to select the photos want to delete. Pressing SET toggles the delete icon on and off. Repeat until all the photos you want to delete are displayed with the delete icon. 7 Press the MENU button, then choose Yes and press SET. All the photos you selected are deleted. 8 To cancel delete, press the MENU button again before pressing SET. To delete all files: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press the MENU button, then press , , , or to select Delete and press SET to confirm.

3 Press the MENU button , then press , , , or to select Delete and press SET to confirm. 4 Press or to select Single, then press SET to confirm. 5 Press or to select the photo want to delete, then press SET to delete the photo.
Insignia NS-DSC7B-09, NS-DSC7P-09, or NS-DSC7S-Megapixel Digital Camera 4 Press or to select All, then pressSET to confirm. 5 Press SET again to delete all unprotected photos. 9 To cancel protect, press the MENU button again before pressing SET. To protect all files: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press the MENU button, then press , , , or to select Protect and press SET to confirm.

Protecting files

To protect single files: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press the MENU button, then press , , , or to select Protect and press SET to confirm. 4 Press or to select Single, then press SET to confirm. 5 Press or to select the photo you want to protect, then press SET to protect the photo. When the photo is protected, the protect icon is shown on the photo when it is displayed on the LCD. 6 Repeat Step 5 to delete additional photos.
Tip To unprotect a photo, press the SET button again in Step 5. The protect icon disappears and the photo is unprotected.
To protect multiple files: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press ZOOM (W), the Thumbnail screen opens. 4 Press the MENU button, then press , , , or to select Protect and press SET to confirm.
4 Press or to select Lock all, then press SET to confirm. 5 Press SET again to protect all photos.
Tip To unprotect all photos, select Unlock all in Step 4, then press SET.

Additional options

Setting the Digital Print Order Format (DPOF)
The DPOF setting lets you select images on the memory card for printing and specify the number of print copies in advance using the camera. This is convenient for sending the images to a photo developing service or for printing on a direct print-compatible printer. To set the DPOF: 1 Press Power button to turn your camera on in record mode. 2 Press the playback button to switch to playback mode. 3 Press the MENU button, then press , , , or to select DPOF and press SET to confirm.

The flash is set to OFF. Set the flash to another mode. Hold the camera steady when shooting a photo. Turn macro mode ON if the subject is within 15 to 40 cm. Do not use macro mode when shooting distant subjects. This camera cannot display non-DCIF images.
The image is blurry The camera was or out of focus. moving when the image was captured. The subject was beyond the range of the cameras focus.
The image is not displayed on the LCD. Recorded images are not saved in memory.
A memory card with non-DCIF images (recorded on another camera) is loaded. The camera was turned off or powered down before the image was stored in memory.
Cannot transfer The USB driver is not images to a installed. computer after connecting the USB cable. Card error The memory card format may not be correct.

Appendix

Understanding folder and file names
Your digital camera automatically creates a directory of folders in the internal memory or memory card. It uses these folders to organize still images, movie clips, and other information.

Folder structure

Folder names begin with a three-digit number from 100 to 999, followed by DICAM. Each folder holds up to 9999 files. If new files are created, a new folder named in sequence will be made automatically.

File naming

File names begin with DSCI, and are followed by a four-digit number that increases sequentially. File numbering starts from 0001 when a new folder is created. If the highest folder number is 999 and the highest file number exceeds 9999, the camera displays the warning message Folder cannot be created. When it appears, try one of the following solutions: Reset the file number and plug in a new memory card. The folder number and file numbers are initialized and renumbered from 100 and 0001 respectively.
Note Do not change the folder and file names on the memory card using your computer. If you do, you may be unable to play back the data using the digital camera.

Available functions

Still Capture Scene Mode

Function

Shutter & Lens One time AF Focus

Continuous AF Infinity Fixed Shutter Speed
1~ 1/2000 8~ 1/2000 8~ 1/2000 8~ 1/2000 1~ 1/2000 1~ 1/2000 1~ 1/2000 1~ 1/2000 1~ 1/2000 1~ 1/2000 1~ 1/2000 8~ 1/sec. fixed 1~ 1/2000 1~ 1/2000 1~ 1/2000 1~ 1/2000 1/15 ~ 1/2000

Off On Auto

Macro Flash Up & Down
Red eye Force on Slow sync Force off Aperturealue

O O O O O O O O O O

Shutterspeed
3:2 16:9 5M 3M 1M VGA 16:9 640
Movie Size Quality Metering Resolution

O O O O O

O O O O O O O

S.Fine Fine

Normal Center Multi

Daylight White Balance

Cloudy Tungsten Fluor_H Fluor_L Custom Auto

O O O O O O

O O O O

1600 ISO

O O O O O O O O O O O
Still Capture Scene Mode MENU

+0.3 ~ +2.0 0EV

Exposure Drive Mode AEB Highlight

-0.3 ~ -2.0 Off

2 sec. 10 sec. Double Burst Off

On Off

Hard Normal
Sharpness Effect Date Stamp Stabilizer

Soft Off

B&W Sepia Negative Red Green Blue Off
O O O O O O O O O O O O O

O O O O O O O O O

Date Date & Time Off
MENU Face Tracking Photo Frame Digital Zoom

Frame 1 ~ 10

: Factory setting

: Default setting

: Available
: Not available. : Disable function.
: Setting is retained even after mode switch or power off. : Set to [OFF] after power off.

Legal notices

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced technician for help.

How to obtain warranty service?
If you purchased the Product at a retail store location, take your original receipt and the Product to the store you purchased it from. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the Product from an online web site, mail your original receipt and the Product to the address listed on the web site. Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. To obtain in-home warranty service for a television with a screen 25 inches or larger, call 1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will have an Insignia-approved repair person dispatched to your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the product in the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover: Customer instruction Installation Set up adjustments Cosmetic damage Damage due to acts of God, such as lightning strikes Accident Misuse Abuse Negligence Commercial use Modification of any part of the Product This warranty also does not cover: Damage due to incorrect operation or maintenance Connection to an incorrect voltage supply Attempted repair by anyone other than a facility authorized by Insignia to service the Product Products sold as is or with all faults Consumables, such as fuses or batteries Products where the factory applied serial number has been altered or removed

(877) 467-4289

Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.

ENGLISH 08-1356