Wireless 150N USB Adapter quick install guide

Model 524698

INT-524698-QIG-0709-02
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS Wireless 150N USB Adapter, Model 524698. This quick install guide presents the basic steps required for setting up and operating this device. For more detailed instructions and specifications (including FCC and CE warnings and statements), refer to the user manual 1) on the CD enclosed with this product; 2) on the Web site listed below; or 3) in some cases, printed and enclosed with this product. Contact your INTELLINET NETWORK SOLUTIONS dealer with comments or questions, or visit www.intellinet-network.com for information on the latest software and firmware updates, related products and additional contact information. System Requirements Notebook or desktop PC with Pentium 1 GHz-compatible processor or higher Windows 2000/XP/Vista Available Hi-Speed USB 2.0 type-A port Package Contents Wireless 150N USB Adapter with detachable antenna USB extension cable Quick installation guide Setup CD with user manual NOTE: Some screen images have been modified to fit the format of this guide. Screen images on all compatible operating systems are similar.

adapter installation

1.Remove the adapters protective cap and attach the antenna to the adapter by securely screwing it onto the antenna connector. 2.With your computer on, gently insert the adapter into a USB 2.0 port. NOTE: If the adapter doesnt easily slide into the port, flip the adapter over and try again. 3.The Welcome to the Found New Hardware Wizard screen will display automatically. Click Cancel to continue.
4.Place the included setup CD in your CD/DVD-ROM drive and run the Setup.exe program. When the License Agreement displays, select I accept the terms of the license agreement and click Next to continue.
5.The first of two Setup Type screens will display. If the adapter is being installed for the first time, its recommended that you select Install driver and Intellinet WLAN Utility. To simply update the driver, select Install driver only. Click Next to continue.
6.The second Setup Type screen presents two options for configuring the adapter. Intellinet Configuration Tool is recommended, as it provides full access to all of the adapters functions. If you prefer to use the wireless configuration tool provided by Windows XP or Vista, select Microsoft Zero Configuration Tool. Click Next.
7.When the Ready to Install the Program screen displays, click Install. To change any previous selections/settings, click Back; to exit the InstallShield Wizard, click Cancel. NOTE: If the Found New Hardware Wizard screen displays again, wait until the InstallShield Wizard Complete screen displays. 8.When the InstallShield Wizard Complete screen displays, click Finish.

Wireless aP connection

The configuration utility is a powerful application that helps you configure the adapter and monitor link status and statistics during the communication process. 1.Once the adapters installation process is complete, the icon for the wireless configuration utility will automatically appear on the computer desktop and at the lower-right corner of the system tray. Right-click the icon and select the configuration utility or switch the adapter to AP mode (refer to the user manual for details). 2.The configuration utility will scan for wireless APs and access any unencrypted wireless APs automatically. To connect to one, select/ highlight it and click Connect. NOTE: If a wireless access point you want to connect to doesnt appear in the AP List field, click Rescan.

3.If the wireless access point uses encryption, you need to input a WEP key or WPA preshared key. Obtain it from the owner of the wireless AP you want to connect to, enter it in the corresponding text field, and click OK. NOTE: The authentication type is selected automatically and shouldnt be changed.
4.When a wireless access point is successfully connected, a blue pointer appears to the left of its name on the AP list.
For details about advanced settings and configuration instructions for the many additional features of the Wireless 150N USB Adapter, refer to the user manual on the included setup CD.
INTELLINET NETWORK SOLUTIONS offers a complete line of active and passive networking products. Ask your local computer dealer for more information or visit
www.intellinet-network.com.
Copyright INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.

Wireless 150N USB Adapter user manual

Model 524698

INT-524698-UM-0809-01
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS Wireless 150N USB Adapter, Model 524698. The Wireless 150N USB Adapter is a compact high-speed adapter that allows you to connect your notebook or desktop PC to wireless networks at faster speeds than ever before. Transfer or receive digital images, videos and MP3 files by connecting to the wireless network with link speeds of up to 150 Mbps using the latest in wireless technology. This adapter is also compatible with 802.11b and 802.11g wireless access points and wireless routers, giving you the flexibility to start upgrading your wireless network without the need to replace existing equipment. With the easy-to-follow instructions in this manual, youll soon be able to enjoy the benefits of these additional features: Includes USB stand and extension cable (Hi-Speed USB 2.0) Supports WMM for increased multimedia data throughput Supports WEP (64/128 bit), WPA and WPA2 data encryption Supports Software AP function; Windows 2000, XP, Vista Lifetime Warranty

FCC Certifications

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RF R adiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment, and should be installed and operated with a minimum distance of 2.5 cm (1 in.) between the radiator and your body. SAR (specific absorption rate) compliance has been established in laptop computer configurations with a USB port on the side near the center, as tested in the application for certification, and can be used in laptops with substantially similar physical dimensions, construction and electrical and RF characteristics. Use in other devices, such as PDAs or lap pads, is not authorized. This transmitter is restricted for use with the specific antenna(s) tested in the application for certification. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of Directive 1999/5/EC of the European Parliament and the Council of March 9, 1999, on radio equipment and telecommunication terminal equipment (R&TTE) and the mutual recognition of their conformity. The R&TTE directive repeals and replaces Directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) as of April 8, 2000.
EU Countries Intended for Use
The ETSI version of this device is intended for home/office use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden and the U.K., and is also authorized for use in EFTA member states Iceland, Liechtenstein, Norway and Switzerland. (EU countries not intended for use: none.)

table of contents

section page Installation...6 Configuration...7 Network...9. Profile....10 Profile Configuration.. 12 Profile Authentication & Encryption (Security).. 13. 802.1x Setting/Certification.. 16 802.1x Setting/CA Server.. 17. Statistics... 18 Advanced... 18 WMM... 21 About...22 WPS Configuration...22 SoftAP.... 26 Configuration... 26 Security Setting... 28 Access Control...30 MAC Table.... 31 Event Log... 31 Statistics... 32 About... 32 Specifications...33 NOTE: The Windows XP screen images are similar for Windows 98SE/Me/ 2000/2003/Vista. Some images have been modified to fit the format of this user manual.

NETWORK

When you open the configuration utility, the system scans all the channels to find access points/stations within the accessible range of the adapter and automatically connect to the wireless device with the highest signal strength. On the Network screen, all the networks nearby are listed. You can change the connection to another network or add one of the networks to your own profile list.
Available Networks: This list shows all available wireless networks within the range of the adapter. It also displays network information: SSID, BSSID, Signal Strength, Channel, Encryption, Authentication and Network Type. To connect to a network on the list, double-click the item and the adapter will connect automatically to it. Rescan: Click Rescan to collect the new information of all the wireless networks nearby. Connect: Click Connect to connect to the selected network. Add to Profile: Click to add the selected network to the Profile list.

profile

The Profile screen is for managing networks you connect to frequently. You can add, delete, edit and activate a profile on this screen.
Profile List: The Profile List displays all the profiles and their related settings, including Profile Name, SSID, Channel, Authentication, Encryption and Network Type. Add, Edit, Delete: Click the corresponding button to add, edit or delete the selected profile(s). Clicking Add displays the Add Profile screen, which presents 1) Configuration and 2) Authentication and Encryption (Security). Activate: To display status information about your current wireless connection, select the profile and click Activate. When a profile is activated, the adapter will be initially connected to it.
Status: This field displays the SSID and MAC ID of the network the adapter is connecting to. Extra Info: This field displays the link status. Channel: This field displays the number of the radio channel and the frequency used for the networking. Link Speed (Mbps): These fields display the transmission (Tx) and the reception (Rx) rates of the network. The maximum transmission rate is 54 Mbps. Throughput (Kbps): These fields display the speed of data being transmitted (Tx) and received (Rx). Link Quality: This status bar indicates the quality of the link. The higher the percentage, the better the quality. dBm: To display the signal strength measured in dBm (decibels in milliwatts), click this box on the Network screen (see Page 9). Signal Strength: This bar shows the signal strength level. The higher the percentage being shown in the bar, the more radio signal being received by the adapter. This indicator helps to find the proper position of the wireless device for quality network operation. Noise Strength: This bar displays the noise level in the wireless environment.

CONFIGURATION 11

Profile Configuration
Profile Name: Define easily recognizable profile names to identify the different networks. SSID: The SSID (up to 32 printable ASCII characters) is the unique name identified in a WLAN. The ID prevents the unintentional merging of two co-located WLANs. If you specify an SSID for the adapter, then only the device with the same SSID can interconnect to the adapter. To add a nearby network to the profile list, pull down the menu to view all the networks that can be selected. Power Save Mode: The two power-saving functions are available only when Network Type (see below) is set to Infrastructure. CAM (Constantly Awake Mode): With this selected, the adapter will remain in an active mode. PSM (Power Save Mode): Enable the adapter in the power-save mode when it is idle. Network Type: Select from the drop-down menu. Infrastructure: This operation mode requires the presence of an 802.11 access point. All communication is done via the AP or router. Ad-Hoc: Select this mode to connect to another wireless station in the wireless LAN network without using an access point or router. Tx Power: To lower the transmit power of the adapter to reduce the power used by the system, select a lower percentage from the drop-down menu. NOTE: A lower power level will result in lower signal strength and reduced coverage range.
RTS Threshold: This is the minimum packet size required for an RTS (request to send). For packets smaller than this threshold, an RTS is not sent and the packet is transmitted directly to the wireless network. Select a setting within a range of 0 to 2347 bytes. NOTE: A minor change is recommended. Fragment Threshold: This value defines the maximum size of packets; any packet size larger than the value will be fragmented. If youve decreased this value and experience high packet-error rates, you can increase it again, but it will likely decrease overall network performance. Select a setting within a range of 256 to 2346 bytes. NOTE: A minor change is recommended.
Profile Authentication and Encryption (Security)
Authentication Type: This pull-down menu setting has to be consistent. with the wireless networks that the adapter is intended to connect. Open: No authentication is needed within the wireless network. Shared: Only wireless devices using a shared key (WEP key identified) are allowed to connect to each other. LEAP: This is a pre-EAP, Cisco-proprietary protocol with many of the features of EAP protocols. Cisco controls the ability of other vendors to implement this protocol, so it should be selected for use only when a limited vendor choice for client, access point and server products is not a concern. When youve set up LEAP authentication,. you need to enter the username and password of your computer. WPA: WPA provides a scheme of mutual authentication using either IEEE 802.1x/Extensible Authentication Protocol (EAP) authentication

or pre-shared key (PSK) technology. It provides a high level of assurance to enterprises, small businesses and home users that data will remain protected and that only authorized users may access their networks. For enterprises that have already deployed IEEE 802.1x authentication, WPA offers the advantage of leveraging existing authentication databases and infrastructure. WPA-PSK: This is a special mode designed for home and small business users who do not have access to network authentication. servers. In this mode, known as Pre-Shared Key, you manually enter the starting password in your access point or gateway, as well as in each wireless station in the network. WPA-PSK takes over automatically from that point, keeping unauthorized users who dont have the matching password from joining the network, while encrypting the data traveling between authorized devices. WPA2: Like WPA, WPA2 supports IEEE 802.1x/EAP authentication, or PSK, technology. It also includes a new advanced encryption mechanism using the Advanced Encryption Standard (AES). AES is required for corporate or government users. The difference between WPA and WPA2 is that WPA2 provides data encryption via AES. In contrast, WPA uses the Temporal Key Integrity Protocol (TKIP). WPA2-PSK: This is also for home and small business use. The difference between WPA-PSK and WPA2-PSK is that WPA2-PSK provides data encryption via the AES. In contrast, WPA-PSK uses the Temporal Key Integrity Protocol (TKIP). WPA-NONE: This is defined for Ad Hoc mode and behaves like WPA-PSK (WPA-PSK is only defined for Infrastructure mode). The user manually enters the Pre-Shared Key in each wireless station in the network, and WPA-NONE controls unauthorized users who dont have the matching Pre-Shared Key from joining the network. It also encrypts the data traveling between authorized devices. 802.1x Setting: When Authentication Type is set to Open, Shared, WPA or WPA2, you can also enable IEEE 802.1x Setting to use the authentication server or certification server to authenticate client users. NOTE: See the two separate 802.1x Setting sections below for details. Encryption: Select from the drop-down menu. None: Disables the encryption mode.

14 CONFIGURATION

WEP: Enables the WEP Data Encryption. When the item is selected,. you need to continue setting the WEP Encryption keys. TKIP: The Temporal Key Integrity Protocol changes the temporal key every 10,000 packets (a kind of message transmitted over a network.). This ensures much greater security than the standard WEP security. AES: AES has been developed to ensure the highest degree of security and authenticity for digital information. Its the most advanced solution defined by IEEE 802.11i for security in the wireless network. NOTE: All devices in the network should use the same encryption method to ensure the security of communications. WPA Pre-Shared Key: The WPA-PSK key can be 8 to 64 characters in length and can be letters or numbers. This same key must be used on all the wireless stations in the network. WEP Key (Key#14): WEP keys are used to encrypt data transmitted in the wireless network. There are two types of key length: 64-bit and 128-bit. Assign a default encryption key (Key#1 to Key#4) by clicking on the corresponding radio button. To fill in each text field: 64-bit: Input 10-digit hex values (in the A-F, a-f and 0-9 range) or 5-digit ASCII characters (a-z and 0-9) as the encryption keys. For example: 0123456aef or test1. 128-bit: Input 26-digit hex values (in the A-F, a-f and 0-9 range) or 13-digit ASCII characters (a-z and 0-9) as the encryption keys. For example: 01234567890123456789abcdef or administrator. The IEEE 802.1X specification describes a protocol that can be used for authenticating both clients (802.1x Setting/Certification below) and servers (802.1x Setting/CA Server below) on a network. The authentication algorithms and methods are those provided by the Extensible Authentication Protocol (EAP), a method of authentication that has been in use for a number of years on networks that provide Point-to-Point Protocol (PPP) support (as many Internet service providers and enterprises do). EAP runs before network layer protocols transmit data over the link. When an AP acting as an authenticator detects a wireless station on the LAN, it sends an EAP request for the users identity to the device. In turn, the device responds with its identity, and the AP relays this identity to an authentication server (typically an external RADIUS server).

IEEE 802.1x Access Client

RADIUS Client

RADIUS Client 1

RADIUS Server

Client requests to log in to the network 2 Log in with username and password

Access Point

(Internet Authentication 3 Username and password sent to RADIUS server 4 User login to the LAN approved orService) denied

Windows 2000 IAS

(1) Client requests to login the (3) Send username, password to 802.1x Setting/Certification network. RADIUS server. EAP Method: The EAP authentication protocols supported by this (4) Approve wireless access. (2) adapter require that settings be consistent with theor deny user Login with username, login connect. password. points or routers that the adapter is intended toto the LAN. PEAP & TTLS: These protocols are similar and easier to use than TLS (below) in that they specify a stand-alone authentication protocol to be used within an encrypted tunnel. TTLS supports any protocol. within its tunnel, including CHAP, MS-CHAP, MS-CHAPv2, PAP and EAP-MD5. PEAP specifies that an EAP-compliant authentication protocol be used; this adapter supports EAP-MSCHAP v2, EAP-TLS/ Smart Card and Generic Token Card. The client certificate is optional. TLS/Smart Card: This is the most secure of the EAP protocols, but. isnt easy to use: It requires that digital certificates be exchanged in
the authentication phase. The server presents a certificate to the client and, after validating the servers certificate, the client presents a client certificate to the server for validation. Session Resumption: Click/check the box to activate or de-activate. ID/Password: Enter the password as the identity for the server. Client Certification: A client certificate is required for TLS, but is optional for TTLS and PEAP. This forces a client certificate to be selected from the appropriate Windows Certificate Store and made available to the RADIUS server for certification. Tunneled Authentication/Protocol: When the authentication type is PEAP or TTLS, select a protocol for building the encrypted tunnel. Tunnel Authentication: Select one of three options from the drop down menu: EAP-MSCHAPv2, EAP-TLS/Smart card or Generic Token Card.

802.1x Setting/CA Server

Use certificate chain: When the Extensible Authentication Protocol (EAP) authentication type such as TLS, TTLS or PEAP is selected and requires certification to tell the client what credentials to accept from the authentication server in order to verify the server, you need to enable this function. Choose the preferred server from the drop-down menu to issue the certificate. If Any Trusted CA is selected, any CA (certification authority) on the list (which is provided by the Microsoft Certificate Store) is permitted. Allow intermediate certificates: A server designates an issuer as a trusted root authority by placing the issuers self-signed certificate,

CONFIGURATION 17

which contains the issuers public key, into the trusted root certification authority certificate store of the host computer. Intermediate or subordinate certification authorities are trusted only if they have a valid certification path from a trusted root certification authority. Server Name: Enter the authentication server name. Server name must match exactly: When selected, the server name must exactly match the server name found on the certificate. Domain name must end in specified name: When this is selected, the server name field identifies a domain. The certificate must use a server name belonging to this domain or one of its sub-domains (e.g., zeelans.com, where the server is blueberry.zeelans.com), but it may be any name used in the certificate name field.

statistics

This screen enables you to view/compare the transmit and receive statistical information of the connection. To reset the counters, click Reset Counter.

Advanced

This screen enables you to configure more advanced settings, such as the wireless mode and the protection mode. Wireless Mode: Select from the drop-down menu. 802.11 B/G mix: If you have a mix of 802.11b and 802.11g wireless. stations in your network, it is recommended that the adapter be set
to this mode. This mode is also the default setting. 802.11 B only: Though the adapter is compatible with both 802.11g and 802.11b wireless stations, if there are only 802.11b wireless stations in the network, you can set the adapter to this mode. Ad Hoc Wireless Mode: When the adapter is set in Ad Hoc (Peer to Peer) mode, you can designate the wireless connection mode for the Ad Hoc network. Only B: Though the adapter is compatible with both 802.11g and 802.11b wireless stations, if there are only 802.11b wireless stations in the network, you can set the adapter to this mode. B/G Mixed: If you have a mix of 802.11b and 802.11g wireless stations in your network, it is recommended that the adapter be set to this mode. This mode is also the default setting. Only G: Though the adapter is compatible with both 802.11g and 802.11b wireless stations, if there are only 802.11g wireless stations in the network, you can set the adapter to this mode. Wireless Protection: If you have a mix of 802.11b and 802.11g wireless stations in the network, its recommended that you enable the protection mechanism, which can decrease the rate of data collisions between 802.11b and 802.11g wireless stations. When the protection mode is enabled, the throughput of the adapter will be a little lower. Auto: Depending on the status of the network, this automatically disables/enables the protection mode. On: Always enables the protection mode. Off: Always disables the protection mode.

CONFIGURATION 19

Tx Rate: There are several options in the drop-down menu: Auto and a range of speeds from 1 Mbps to 54 Mbps. When Auto is selected, the device automatically chooses the most suitable transmission rate. The higher the data rate designated in the network, the shorter the distance allowed between the adapter and the wireless stations. Enable Tx Burst: This enables the adapter to deliver better throughput in the same period and environment. Enable TCP Window Size: The TCP window is the amount of data a sender can deliver on a particular connection before it gets an acknowledgment back from the receiver that it has gotten some of it. When the router or AP the adapter is connecting to has set up the TCP window, you can enable the parameter to meet the data size for the router or AP connection. The larger the TCP window, the better the performance. Fast Roaming at [-70] dBm: To fast roam to a nearby network without interrupting the wireless connection (such as a multimedia application or a voice call), you can set this parameter. The adapter will fast roam when the receive sensitivity (signal strength) is below the value entered. Show Authentication Status Dialog: Select to display. Select Your Country Region Code: Channel availability varies from country to country; for example, USA (FCC) channels are 1-11, while Europe (ETSI) channels are 1-13. Enable CCX: Cisco Compatible Extensions, for radio monitoring and fast roaming. Turn on CCKM: During normal operation, LEAP-enabled client devices mutually authenticate with a new AP by performing a complete LEAP authentication, including communication with the main RADIUS server. When a wireless LAN is configured for fast re-association, however, LEAP-enabled client devices roam from one access point to another without involving the main server. Using Cisco Centralized Key Management (CCKM), an access point configured to provide wireless domain services (WDS) takes the place of the RADIUS server and authenticates the client so quickly that there is no perceptible delay in voice or other time-sensitive applications. Enable Radio Measurement: When this parameter is enabled, the Cisco
AP can run the radio monitoring through the associated CCX-compliant clients to continuously monitor the WLAN radio environment and discover any new APs that are transmitting beacons. Non-Serving Channel Measurements: The Cisco access point can perform monitoring measurements through the CCX-compliant clients on the non-serving channels when this parameter is enabled. Limit [xxx] milliseconds (0-2000): This setting limits the channel measurement time. The default value is 250 milliseconds. Turn off RF: Click to turn off the radio of the adapter; click again to turn it back on.

This screen enables you to configure WMM (Wi-Fi Multimedia) and other QoS settings, such as Power Save and Direct Link Setup.
WMM Enable: Click the check box (then click Apply) to enable the WMM function, which then lets you configure the WMM Power Save and Direct Link Setup functions. WMM Power Save Enable: Click the check box to enable, then click Setting to further configure the function as AC_BK, AC_BE, AC_VI or AC_VO. Direct Link Setup Enable: Click the check box to enable, then click Apply to further configure the function (all within the Direct Link panel). -MAC Address: Specify the MAC address of the client adapter you
want to direct link to and click Apply to add to the DLS Status table (below). -Timeout Value: Specify the timeout value for the direct link being set up.
On this screen, you can click the hyperlink for information on the wireless chipset manufacturer. Basic information about the utility (driver, EEPROM version, etc.) also displays, as do various addresses for quick reference.
NOTE: This adapter features Turbo Mode, which delivers a higher throughput than IEEE 802.11g standard (up to 54 Mbps) by compressing data and decreasing the wait time for sending data to routers or access points. Turbo Mode is enabled automatically without any configuration.

wps configuration

The adapter supports WPS (Wi-Fi Protected Setup), allowing connection to wireless APs that also support WPS without complicated procedures. Two WPS configuration methods are available when you click to display this screen: PBC (push-button configuration) and PIN Code (an option for older APs not equipped with the WPS push button but which may be transformed into a WPS-enabled access point through a firmware upgrade).
PBC (Push-Button Configuration)
1.From the Config Mode drop-down menu, select Enrollee, then press the WPS button (or whichever button is used to activate the WPS Standby mode) on your wireless access point. NOTE: Refer to your wireless access points user manual for the specific procedure(s). Alternatively, you can select Registrar, in which case this adapter will wait for other WPS-enabled access points to send WPS pairing requests. NOTE: Refer to your wireless access points user manual to understand how to send WPS requests. 2.Before you start to establish the wireless connection using WPS, you can click Rescan to search again for WPS-enabled access points near you in order to make sure the WPS function of your access point is activated. All access points with the WPS function enabled will be displayed in the WPS AP List field. If the access point you want to connect to isnt listed, click Rescan a few more times. 3.Begin the PBC pairing procedure on the access point side (again, refer to your access points manufacturers instructions), then click PBC to establish a wireless connection via WPS. NOTE: This may require as much as a full minute to complete. When the WPS status is connected successfully message displays, the connection between the adapter and the access point has been successfully established through WPS and information about the access point you connected to will be displayed.

4.Should the WPS function fail (as indicated on the following screen, which shows that WPS pairing failed because no WPS-enabled AP was found), you may find that clicking PBC a few more times will result in a connection. When an access point is connected, you can click Disconnect to break the connection, or you can highlight/select another WPS-enabled wireless access point when more than one is found, then click Connect to establish that connection. You can also click Rotate to select the next access point on the list for connection.
Information: Click to display a pop-up window describing a selection. Detail: Click to show details of a selected WPS-enabled access point. Export Profile: Click to save a highlighted connection on the list as a profile, which will display on the WPS Profile list and which can be retrieved in the Profile menu. Delete: Delete the selected WPS-enabled access point from the list. WPS Associate IE: Select to send the association request with WPS IE (Information Element) during WPS setup. This is optional: You can use the default value if you dont know what will be affected. WPS Probe IE: The Wireless Provisioning Services Information Element (WPS IE) makes it easier to connect to public Wi-Fi networks youve not previously connected to. Your computer must have the WPS IE update for Windows XP SP2 installed in order to use the function. This is optional: You can use the default value if you dont know what will be affected. Auto: See PIN Code below.

24 softap

PIN Code
1.Enter the 8-digit PIN code of the adapter (highlighted below) in your wireless access point as the WPS PIN code. NOTE: Refer to your wireless access points user manual for instructions. If you have a problem with the PIN code provided here, click Renew to get a new PIN code.
2.Click PIN. After a short period (up to a minute), if a wireless access point with the correct PIN code is found, youll be connected to that access point. NOTE: As with PBC, you may need to click PIN a number of times to make a connection. (It helps to confirm youve entered the correct PIN code into the AP.) Information: Click to display a pop-up window describing a selection. Detail: Click to show details of a selected WPS-enabled access point. Export Profile: Click to save a highlighted connection on the list as a profile, which will display on the WPS Profile list and which can be retrieved in the Profile menu. Delete: Delete the selected WPS-enabled access point from the list. WPS Associate IE: Select to send the association request with WPS IE (Information Element) during WPS setup. This is optional: You can use the default value if you dont know what will be affected. WPS Probe IE: The Wireless Provisioning Services Information Element (WPS IE) makes it easier to connect to public Wi-Fi networks youve not previously connected to. Your computer must have the WPS IE update for Windows XP SP2 installed in order to use the function.

softap

This is optional: You can use the default value if you dont know what will be affected. Auto: When selected, the wireless access point to be connected will be selected automatically.

softAP

This adapter can run as a wireless access point (AP). Right-click the configuration utility icon on the Windows system tray and select Switch to AP Mode to activate the SoftAP function.
This screen enables you to configure the AP connection setting, the Country Region Code and other advanced functions. SSID: The SSID (up to 32 printable ASCII characters) is the unique
name identified in a wireless LAN. The ID prevents the unintentional merging of two co-located WLANs. The default SSID of the AP is SoftAP-X. (X is the last number of this adapters MAC address). Wireless adapters connected to the access point should be set up with the same SSID as the AP. Channel: Select the number of the radio channel used by the access point. Any wireless adapters connected to the AP should be set up with the same channel. Wireless Mode: Selects the wireless mode supported by the AP. Use MAC Address: Click to create a unique SSID based on the adapters MAC address. Security Setting: Click to further configure WLAN authentication and security settings. (See the separate Security Setting section below.) Country Region Code: Channel availability varies from country to country; e.g., USA (FCC) channels are 1-11, while Europes (ETSI) are 1-13. Beacon (ms): Define the time between beacons (default is 100 ms.) Tx Power: To lower the transmit power of the AP to reduce the power used by the system, select a lower percentage from the drop-down menu. NOTE: A lower power level will result in lower signal strength. and reduced coverage range. Idle Time: Select the idle time for the wireless access point. The default value is 300, and normally there is no need to change it. No forwarding among wireless clients: Enable to prevent wireless clients connected to this AP from sharing information with each other. Hide SSID: When this box is checked, the AP will not appear in the site survey list of any wireless clients, meaning only the wireless clients set with the same SSID can connect to the AP. This prevents the AP being connected to by unauthorized users. Allow BW 40 MHz: Check this box to allow BW 40 MHz capability. Tx Burst: Check this box to accelerate the data transmit rate. It may not work with all wireless access points and wireless devices. Default: Click to use the default value. Apply: Click to apply the setting change(s).

security setting

This screen accessed by clicking Security Setting on the previous SoftAP Configuration screen lets you to configure the authentication mode and encryption algorithm used within the AP.

Pre-Shared Key

Authentication Type: Four types of authentication mode are supported and presented in the drop-down menu. Open: No authentication is needed within the wireless network. WPA-PSK: This is a special mode designed for home and small business users who do not have access to network authentication. servers. In this mode, known as Pre-Shared Key, you manually enter the starting password in your access point or gateway, as well as in each wireless station in the network. WPA-PSK automatically takes over from that point, keeping unauthorized users who dont

28 softap

have the matching password from joining the network, while encrypting the data traveling between authorized devices. WPA2-PSK: This is also for home and small business use. WPA-PSK/WPA2-PSK: When selecting this mode, the AP supports both WPA-PSK and WPA2-PSK. Encryption Type: Five options are available in the drop-down menu. Not Use: Disables the encryption mode. WEP: Enables WEP Data Encryption. When the item is selected, continue setting the WEP Key. TKIP: The Temporal Key Integrity Protocol changes the temporal key every 10,000 packets (a kind of message transmitted over a network.) This ensures much greater security than standard WEP security. AES: Advanced Encryption Standard was developed to provide the highest degree of security and authenticity for digital information. Its the most advanced solution defined by IEEE 802.11i for security in a wireless network. BOTH: In this mode, the AP supports both TKIP and AES. WPA Pre-Shared Key: The WPA-PSK key can be 8 to 64 characters in length and can be letters or numbers. This same key must be used on all the wireless stations in the network. Group Rekey Interval: This function is available when using WPA-PSK and WPA2-PSK encryption algorithms. WEP Key (Key#14): WEP keys are used to encrypt data transmitted in the wireless network. There are two types of key length: 64-bit and 128-bit. Assign a default encryption key (Key#1 to Key#4) by clicking on the corresponding radio button. To fill in each text field: 64-bit: Input 10-digit hex values (in the A-F, a-f and 0-9 range) or 5-digit ASCII characters (a-z and 0-9) as the encryption keys. For example: 0123456aef or test1. 128-bit: Input 26-digit hex values (in the A-F, a-f and 0-9 range) or 13-digit ASCII characters (a-z and 0-9) as the encryption keys. For example: 01234567890123456789abcdef or administrator. Show Password: The password will be displayed in clear text instead of with asterisks.

access control

This screen lets you configure the access control policy used within the access point.

MAC Table

Access Policy: Select from the drop-down menu. Disable: Disables the MAC address filtering function. Allow All: Only wireless adapters with a MAC address on the access list can connect to the AP. Reject All: Wireless adapters with a MAC address on the access. list will be prevented from connecting to the AP. MAC Address: This is the unique 12-digit hexadecimal identification for hardware devices in the network. Access List: Displays all the MAC address that have been added. Add: Add the MAC address to the access list. Delete: Delete the selected MAC address from the access list. Remove All: Remove all MAC addresses from the access list. Apply: Click to apply the setting change(s).

Specifications

INTELLINET NETWORK SOLUTIONS offers a complete line of active and passive networking products. Ask your local computer dealer for more information or visit
www.intellinet-network.com.
Copyright INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.