DVD Receiver DMR 60

english

franais

deutsch

svenska

espaol italiano

nederlands

Contents

Introduction Connecting the system System Setup Playing DVD and CD Playing back files Advanced functions Radio Troubleshooting Service and Warranty 20
Congratulations on your new purchase. the Jamo DMR 60 DVD receiver.
With this incredible state-of-the-art product you can experience the great sound and picture quality on a DVD or listen to music in HiFi Stereo quality. but theres more to it than that. You can also play back a wide variety of new file-based media like MP3, WMA, DivX and JPEG files from disc or directly from USB or memory card. Youll find out more about these new possibilities later in this manual (alternatively seek out the latest info online at www.jamo.com). Whatever your needs, were sure that your new DMR 60 will prove a gateway to amazing home entertainment experiences for many years to come.

Introduction

Make sure the following accessories are included with your DMR 60

SOURCE

DVD-Receiver Jamo DMR 60
30m / 98ft of speaker cable
Batteries for the remote control

Remote control

S-Video (not provided with European models)
SCART (provided with European models)

Composite Video

Audio cable

FM Antenna

AM Antenna

Connecting the system

Refer to the illustration below to connect speakers, subwoofer and antennas. To install the DMR 60 into your current TV system, refer to the three configuration examples. Choose from one of them or make your own combination.

Surround right

Surround left

Subwoofer

Front right

Centre

Front left

Back panel layout

2 1. AM antenna 2. FM antenna 3. Analogue Audio In - TV (Not on European model) 4. Analogue Audio In - AUX 5. Analogue Audio Out
9 6. Digital In (Co-axial) 7. Digital In (Optical) 8. Video Out Composite 9. S-Video Out 10. Front speaker right out 11. Front speaker left out 17 12. Centre speaker out 13. Surround speaker right out 14. Surround speaker left out 15. Subwoofer output 16. Component video out 17. SCART In/Out (On European model only)
SCART video configuration
Both audio and video are passed through the SCART cable. If you connect a device to the SCART 2 on your TV, most TVs will automatically send the audio to the DMR 60. If a Satellite receiver, set top box, VCR, PC, Games consol or MP3 player has digital or analogue audio output, you can connect it directly to the DMR 60. TV
PC Games consol MP3 Player

VCR Satellite/STB

S-Video configuration
Video is connected through the S-Video cable to the TV. Audio is connected from the TV to the DMR 60. If a Satellite receiver, set top box, VCR, PC, Games consol or MP3 player has digital or analogue audio output, you can connect it directly to the DMR 60.

Games consol

MP3 Player

Satellite/STB VCR

Component video configuration
The Component video output can be connected to plasma and LCD displays (component cables are not included). Audio from the HD video source is connected directly to the DMR 60. If a PC, Games consol or MP3 player has digital or analogue audio output, you can connect it directly.

Plasma

Front panel layout
1. Volume down 2. Volume up

3. Open/Close 4. Play

5. Stop 6. Previous

7. Next 8. Source

9. Standby

Remote control layout

1. Standby 2. Numerical keys, 0 to 9 3. Goto 4. Mute 5. Volume down 6. Volume up 7. Cursor Up 8. Cursor Left 9. OK 10. Cursor Right 11. Cursor Down 12. Menu 13. Setup 14. DVD / USB 15. FM / AM 16. Co-axial / Optical 17. TV / Auxiliary 18. Rewind 19. Play/Pause 20. Forward 21. Previous Track/Chapter/Program 22. Stop 23. Next Track/Chapter/Program 24. Audio 25. Subtitles 26. Repeat 27. Shuffle 28. Info 29. Zoom 30. Sound 31. Surround

VOLUME

Putting the batteries in the remote

System Setup

To access the DMR 60 setup menu, press SETUP. Use / / / to browse through the menus, and press OK to select an item. To exit System Setup, press SETUP.

TV SYSTEM

SYSTEM SETU P TV SYSTEM VIDEO TV TYPE PASSWORD PARENTAL DEFAULT EXIT SETUP NTSC PAL
Choose between NTSC and PAL video output from the DMR 60. The default setting should be appropriate for your region - changing it may result in poor picture quality
SYSTEM SETU P TV SYSTEM VIDEO TV TYPE PASSWORD PARENTAL DEFAULT EXIT SETUP SCART / S-VIDEO COMPONENT PROGRESSIVE
Video output selection enables you to choose the type of video output suitable for your DVD system. The default setting is SCART (RGB) or S-Video, depending on country. Note: 1. If you choose the PROGRESSIVE SCAN video option, which is only delivered through component output, you must ensure beforehand that your TV is capable of showing progressively scanned images. 2. SCART, S-Video and composite video outputs are always on. If you get a black screen when choosing the PROGRESSIVE function, please connect your TV with one of these connections so you can reset PROGRESSIVE.

TV TYPE

SYSTEM SETU P TV SYSTEM VIDEO TV TYPE PASSWORD PARENTAL DEFAULT EXIT SETUP 4:3 LB 4:3 PS 16:9
You can select the aspect ratio that is appropriate for your TV display. The default setting is 16:9. 4:3 LB If you have a conventional square set and would like to see the DVD picture in its full format, use this setting. Wide bands will be displayed on the upper and lower portions of the TV screen. 4:3 PS If you have a conventional TV set and would like to see the DVD picture fill your TV screen then use this setting. A wide picture is displayed on the whole TV screen with a portion automatically out off. 16:9 If you have a widescreen TV set, use this setting (you must also set your widescreen TV to its 16:9 mode.).

PASSWORD

The password is used to change the parental control level.
SYSTEM SETU P TV SYSTEM VIDEO TV TYPE PASSWORD PARENTAL DEFAULT EXIT SETUP ___ _

Setting a Password Choose password and enter 0000 followed by OK, then the unlocked icon will appear. To lock the function, enter a number between 0000-9999 followed by OK, then the locked icon will appear. Note: If you forget the password, you can enter 0000.

PARENTAL CONTROL LEVEL

SYSTEM SETU P TV SYSTEM VIDEO TV TYPE PASSWORD PARENTAL DEFAULT EXIT SETUP 1 G PG 4 PG R 7 NC-NO LIMI T
This function allows you to restrict viewing of unsuitable DVDs, useful where younger viewers have access to the DMR 60. Note: Before changing the parental control level, you must enter the preset password (4-digital code) to unlock this function. If the entered password is incorrect, you will not be able to change the level.

DEFAULT

SYSTEM SETU P TV SYSTEM VIDEO TV TYPE PASSWORD PARENTAL DEFAULT EXIT SETUP RESTORE
If you select this function, all of the functions will be restored to their defaults except the PASSWORD and the PARENTAL CONTROL LEVEL.

Language Setup

OSD LANGUAGE
This sets the OnScreen Display language for the DMR 60. Default setting is: ENGLISH.
LANGUAGE SETUP OSD LANG. AUDIO LANG. SUBTITLE LANG. MENU LANG EXIT SETUP ENGLISH GERMAN FRENCH ITALIAN SPANISH PORTUGESE DUTCH

AUDIO LANGUAGE

If available on the DVD, this function allows you to select the preferred audio language. Default setting is: ENGLISH.

SUBTITLE LANGUAGE

LANGUAGE SETUP OSD LANG. AUDIO LANG. SUBTITLE LANG. MENU LANG EXIT SETUP ENGLISH GERMAN FRENCH ITALIAN SPANISH PORTUGESE DUTCH OFF
If available on the DVD, this function allows you to select the preferred Subtitle language. Default setting is: OFF.

MENU LANGUAGE

If available on the DVD, this function allows you to select the desired Menu language. Default setting is: ENGLISH.

Speaker Setup

CENTRE DELAY
SPEAKER SETUP CENTER DELAY SURROUND DELA Y DYNAMIC RANGE TEST SPEAKER S EXIT SETUP 2M 1M 0.5M OFF
Selects the Centre-channel delay time for Dolby Digital audio. Use and to turn it up and down. Default setting is: OFF. M is how many metres the centre speaker is closer to the listening position than the front speakers.

SURROUND DELAY

SPEAKER SETUP CENTER DELAY SURROUND DELA Y DYNAMIC RANGE TEST SPEAKER S EXIT SETUP 5M 3M 1M OFF
Selects the Surround channel delay time for Dolby Digital audio. Use and to turn it up and down. Default setting is: OFF. M is how many metres the surround speaker is closer to the listening position than the front speakers.

DYNAMIC RANGE

SPEAKER SETUP CENTER DELAY SURROUND DELA Y DYNAMIC RANGE TEST SPEAKER S EXIT SETUP FULL 6/8 4/8 2/8 OFF
If you want to watch a movie without disturbing others in the house, you can reduce the dynamics (loud sounds) by activating the dynamic range function. Dynamic range compression can be selected in Dolby Digital mode. Use and to turn it up and down. Default setting is: OFF.

TEST SPEAKERS

Press this to test that all your speakers are connected correctly. The test signal rotates as follows: Front Left Centre Front Right Surround Right Surround Left

Getting Started

This is an overview of the most frequently used buttons on the remote control for the DMR 60.

Standby Button

Standby will turn the DMR 60 on and off

Amplifier Buttons

Press mute if instant silence is needed. Change the volume level by pressing the volume -/+.

Source Select Buttons

USB AM OPT AUX
Press the DVD button to start playing a disc, press again to select USB / Card reader input. Pressing the FM button will activate the FM radio tuner while pressing it again will select the AM band. COAX should be pressed to select Co-axial digital input, press again to select Optical digital input. TV can be selected by pressing the TV button, press again to switch to Auxiliary input.

Playing DVD and CD

This is an overview of the buttons on the remote control that are most frequently used when playing an ordinary DVD or CD.
GOTO is used together with the numeric buttons 0-9. When playing a DVD or CD: Press GOTO Select: TT (Title) - Track/Chapter - Time using / Enter a value with the numeric buttons 0-9 Press OK.
Press MENU to enter the DVD menu.

Basic playback functions

When playing a DVD or CD, you can also use these buttons to rewind, play/pause, fast forward, skip back, stop or skip forward.
Playing back files from Disc, USB and Card reader
If you insert a Disc, USB device or memory card (SD-, MMC-, MS- and SM-cards) with mp3-, wma-, jpg-, divx-files, your DMR 60 will switch to File Playback mode.

Choosing a file mode

When in File Playback mode, you will be able to choose between 3 modes, which are: Music Picture Movie You can switch between the 3 modes by pressing / on the remote until your desired file option is highlighted, then press OK to select.
[WORK] - - - - - - 10.MP3 [WORK] [HOME] 01. - - - - - - 02. - - - - - - 03. - - - - - - 04. - - - - - - 05. - - - - - - 06. - - - - - - 07. - - - - - - 08. - - - - - - 09. - - - - - - 10. - - - - - - 1 9

Playing MP3 and WMA

Choose the Music icon by pressing / until it is highlighted followed by OK. Browse through the music files using / / / on your remote, and press OK to enter/exit a library. Press OK to select a song.
[WORK] - - - - - - 10.JPG [WORK] [HOME] 01. - - - - - - 02. - - - - - - 03. - - - - - - 04. - - - - - - 05. - - - - - - 06. - - - - - - 07. - - - - - - 08. - - - - - - 09. - - - - - - 10. - - - - - - 1 9

Viewing pictures

Choose the Picture icon by pressing / until it is highlighted followed by OK. Browse through the picture files using / / / on your remote, and press OK to enter/exit a library. Press OK to view a picture in full screen.
[WORK] - - - - - - 10.DIVX [WORK] [HOME] 01. - - - - - - 02. - - - - - - 03. - - - - - - 04. - - - - - - 05. - - - - - - 06. - - - - - - 07. - - - - - - 08. - - - - - - 09. - - - - - - 10. - - - - - - 1 9

Playing DivX movies

Choose the Movie icon by pressing / until it is highlighted followed by OK. Browse through the movie files using / / / on your remote, and press OK to enter/exit a library. Press OK to select a movie.

Advanced Functions

Heres a brief description of the Advanced Function buttons. Please note that not all functions are available on all media.

AUDIO - Audio

Use this function to choose between the available audio tracks on the film. Normally you can also choose Audio on the DVD menu.

SUB-T - Subtitle

Use this function to choose from the subtitles available on the DVD. Normally you can also choose the subtitle on the DVD menu.

REPEA - Repeat

You can play the current title/disc or a chapter/track continuously by activating repeat.

SHUFF - Shuffle

When shuffle is activated tracks are played in random order.

INFO - Info

You can check information about the media you are watching, such as the total number of the titles or chapters or tracks or time, using the Info function. The information will appear on the TV screen.

ZOOM - Zoom

You can zoom in on specific areas of the picture. When available, press ZOOM to blow up a portion of a picture, and use the cursor to move the zoom-window on the screen.

SOUND - Sound

Press this to adjust Treble, Bass, Front Left, Center, Front Right, Surround Right, Surround Left and Subwoofer levels.

SURR - Surround

Press this button to toggle between stereo and different surround sound modes.
Note: The availability of various surround sound modes depends on the number of speakers connected and the sound mode available for the media playing.

Radio - Basic operation

If the antennas are correctly connected, you should be able to listen to both FM and AM radio. This is an overview of the buttons frequently used when playing FM or AM radio.

FM / AM

Press the FM / AM button to turn on the radio. The last radio station you selected can be heard. Switch between FM and AM by pressing the button.
Switching between stations
Press or on the remote control or on the front panel to move between the preset stations.

AUDIO SUB-T REPEA SHUFF

Radio - Advanced operation
This is an overview of the buttons used when finding and storing FM and AM radio stations.
Store a radio station To store a radio station manually, do the following: 1. After finding a station, press GOTO. 2. Enter a number between 01 and 30 (AM 01 and 10). 3. Press GOTO.
Find a radio station 1. Press and hold or until the frequency indicator starts to change, then release. The system automatically tunes to the next strong radio station.
RDS station service RDS (Radio Data System) is an additional information system provided by most FM stations. If a RDS station is being received, you can see programme information on the DMR 60 display by pressing INFO on the remote.

FM 92.90

Troubleshooting
If the DMR 60 appears to be faulty, first consult this troubleshooting guide before calling for service. Refer also to the corresponding instructions in this manual. WARNING Under no circumstances should you attempt to repair the system yourself.

Symptom

No picture.

Possible cause

The TV is switched OFF. The TV is not connected correctly. The disc is placed upside down. The disc is empty or the format is not supported by DMR 60. The disc is dirty or defect. The disc is not placed within the disc tray guide.

Correction

Turn ON the TV. Connect the TV correctly. Ensure the disc label is facing up. Remove the disc and try another. Clean the disc or dispose of it. Place the disk within the proper guide on the disc tray.

Disc cant be played.

No sound.
The VOLUME is set to 0. Speaker cords are not connected correctly. No batteries are inserted in the remote control. The batteries are worn out. The remote controller is not pointed at the remote sensor of the DMR 60. The remote controller is too far from the DMR 60.
Turn up the VOLUME. Connect them correctly.
The DMR 60 unit does not respond to commands from the remote control.
Insert new batteries. 2 x AAA R6P Replace with new batteries. 2 x AAA R6P Point the remote controller at the remote sensor of the DMR 60. Operate the remote controller within 5 m. Connect the power plug securely. Turn ON the wall plug.
Power is not supplied even though the power cable is connected.
The power plug is not securely connected. The wall plug is not turned ON. Operations may not be permitted by the disc.
The DMR 60 does not respond to some operating commands during playback
Read the instructions on the disc.

Service and Warranty

Environmental information The system is made of recyclable materials which can be re-used if disassembled by authorised personnel. Please follow local regulations for the disposal of packaging materials, used batteries and discarded units. Copyright This product contains copyright technology which is protected pursuant to patents that are the property of Macrovision Corporation and other copyright holders. Any use of this copyright technology must be approved by Macrovision Corporation. The technology is intended for use in the home unless otherwise approved by Macrovision Corporation. Breakdown and disassembly are prohibited. Made under license from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. Service In case of warranty enquiries, please contact your dealer. In case of request for service under warranty, please enclose your original receipt. Important: Never send the product to be repaired without prior agreement. If the DVD player is STILL UNDER WARRANTY, Jamo will pay freight costs back and forth between the dealer and the Jamo authorised service centre. Any other freight must be paid for by the customer. The product must always be packed properly, otherwise the product warranty will be discontinued. If the DVD player is NOT UNDER WARRANTY, all costs must be paid for by the customer. Warranty certificate Jamo provides a twenty-four (24) month warranty from the date of purchase against material and manufacturing defects. For defects covered by the warranty, the product must be returned to the dealer that sold the product. The expected time of repair, excluding transport, is approximately five working days. If any problems arise, information from our authorised service centres is available at the following address, or from the dealer who sold the product. Terms of Warranty 1. The warranty is only valid on presentation of the original sales receipt, and if the serial number on the product is fully legible. 2.The obligations of Jamo are limited either to repair or replacement of defective components. The repair or replacement of defective components is based on an assessment by Jamo. Exchange is only possible if the repair cannot be performed. 3.Warranty repairs must be carried out by an authorised Jamo dealer, or an authorised service centre. No remuneration is provided for repairs performed by unauthorised workshops. Any repairs or damage to the product caused by unauthorised intervention are not covered by this warranty. 4.This product will not be considered as being defective, either in materials or in manufacture, if adaptation to national, local, technical or safetyrelated requirements is required in countries other than the specific country for which the product was originally designed and manufactured. 5.This warranty does not cover these types of adaptations, and no remuneration will be offered for these types of adaptations or for any consequential damages. The warranty does not cover the following: a) Periodic inspection, maintenance and repair or replacement of parts resulting from normal wear. b) Costs connected to transport, disassembly or installation of the product. c) Mis-use, including use for purposes other than was intended, or faulty installation. d) Damage caused by lightning, water, fire, natural catastrophes, war, insurrection, incorrect line voltage, insufficient ventilation, transport or other causes outside of the control of Jamo. 6.This warranty applies to every legal owner of the product during the warranty period. Packaging If possible, use the original packing material for any shipping. Otherwise, re-pack the DMR 60 using: A reinforced cardboard box, strong enough to carry the weight of the product. At least 6 cm / 2.36 inches of shock-absorbing material around the product. Non-abrasive dust-free material for the other parts. Non-abrasive wrapping for the product. (Dust and dirt cover) Re-pack the product in such a way as to ensure that it cannot shift in the box during transport. Information we must receive before repairing the product: Model name: Jamo DVD Receiver DMR 60 Serial no.: Fault description: Copy of the invoice or sales receipt The dealers name, address and phone no. Personal information: Name, address, post code/city, phone no. and e-mail address (optional). Your signature Dealers stamp and signature Date