T E C H N I C A L

S P E C I F I C A T I O N

S H E E T

ESPII60

DESCRIPTION FEATURES

60/120 CHANNELS / 24 SCENE MASTERS MEMORY LIGHTING CONTROL CONSOLE
Memory: Power supply: Consumption: Connector: 256 Kbytes Universal 100~240VAC 10% , 47~63 Hz 40W typical IEC 3-pin with integral fuse, switch and mains filter Fuse: 2A M205/240V MIDI in: 5-pin DIN socket DMX out: USITT DMX-512/1990 protocol (RS-485 standard)/ AXR 5-pin socket Analogue out: 0 ~ +10V DC/ Socapex 337 socket (option) Desk lamp outputs: 2 12V current limited, AXR 3-pin socket; 10W max. Displays: character, 2 line LCD, green backlight Dimensions: 1495mm (W) 530mm (D) 115mm (H) Net/shipping weight: 25/28 kg
The ESPII 60 console is primarily designed for the control of devices featuring DMX input circuitry such as dimmers racks and colour scrollers. Units requiring an analogue input (0 to +10 volts) can also be controlled if the console is fitted with optional analogue outputs.
* DMX 512 output to control dimmers, moving lights and colour scrollers * Wide mode doubles the number of channel faders to 120 channels * Add/solo functions on all channels and scene masters * Three proportional softpatches to 512 DMX channels * LCD windows for operator feedback * Up to 498 memories * Up to 30 scene pages * Up to 30 chases * Live or blind editing * Easy recording of scenes * Timed dipless crossfades * Effects (FX) section * 5 option ports (back panel) * Console linking to JANDS STAGE / ESP II / EVENT / EVENT PLUS consoles * CE approved: EN50081-1, EN50082-1, EN60950 *

SUPPLIED ACCESSORIES

2m IEC to Clipsal 463 power cable (export models may vary) Operating manual

ORDERING INFORMATION

MODEL/PART ESP II 60 PART NO. JND-ESPII60 JND-OPM JND-OPVM-VGA JND-MCARD JND-OPFD-ESPII60 JND-OPA60 CAE-18XR/CAE-18XR-Hi JND-FC-ESPII60

OVERALL SPECIFICATIONS

Control channels: Scene masters: 60 (normal), 120 (wide) 24
M-card module VDU interface/M-card module M-card Floppy disk drive module (DOS format) Analogue output module Desk lamp Flightcase

PRESET 1

PRESET 2

i 35 95

l 38 98

CURSOR

D.B.O.

D.B.O. INHIBIT OFF

VALUE -

ADD LATCH SOLO OFF

ASSIGN

REVERSE

ALL SCENE

OFF ON

EDIT SETUP

RANDOM

MASTER

ESP II 60 console

ESPII24 60

SCENE MASTERS

RECORD

Electronics

The control surfaces shall be scratch-resistant 0.25mm Lexan with legends reverse silk-screened from behind. All operator controls and displays shall be provided on the top operating surface of the console. The chassis shall have sufficient ventilation holes to allow adequate convection cooling of the power supply, provided the ambient temperature does not exceed 40C (104F). Five (5) rear panel option slots shall allow the fitting of optional modules including M card/ video output/ analogue outputs and floppy disc drive. The console shall be the JANDS ESP II 60.
ARCHITECTS & ENGINEERS SPECIFICATION
The console shall provide control of up to 60 control channels (120 in Wide mode) via the industry standard USITT DMX-512/1990 protocol. The DMX output socket on the back panel shall be a 5-pin AXR and the output voltages shall conform to standard RS-485 balanced serial data transmission. The console shall have a standard MIDI In 5-pin DIN connection. The console shall have two (2) banks of preset faders and a flash button with an integral LED per channel to allow direct manual control of stage lighting intensity. In addition five (5) liquid crystal displays (LCDs) shall be provided to enable the operator to view operating parameters and to edit information. A memory capacity of no less than 256 Kbytes is required. The memory shall be battery-backed to prevent memory loss when switched off. The battery shall have a life of at least four (4) years. The console shall incorporate design techniques and electronic filters to comply with Australian and European Union directives on electrical safety and electromagnetic compatibility (EMC).

530 mm

The operating software of the console shall incorporate diagnostic test routines that exercise the different systems on the CPU card. These test routines shall indicate to the operator (using LEDs and/or displays) the result (pass/fail) of the tests. An error message shall be displayed to the operator should the software malfunction or be corrupted.

Operation

DESKLAMP
Three (3) proportional DMX softpatches shall be available.
The console shall be factory tested and cyclically burned-in for a minimum of 24 hours.

115 mm

The console shall operate from a single-phase supply of 100 to 240 volts AC 10% with a supply frequency of 47 to 63 Hz and shall not draw more than 50 watts of power of power from a normal power outlet. The power inlet shall be a switched and filtered IEC mains socket with integral fuse, located on the back panel of the console. The power supply shall be a universal-type switched mode supply requiring no changing of internal links to accommodate different supply voltages. A 12V current limited supply terminated on a 3-pin AXR socket shall be provided on the back panel to power a pair of optional desk lamps.

Electrical

The console shall feature a desk linking function. Mechanical The console shall be a free standing device and be 1495mm wide, 530mm deep and 115mm high. The console shall be constructed of 1.2mm steel, and shall be provided with a removable 1.2mm aluminium base for access to internal electronics. All metal surfaces shall be properly treated and finished in powdercoat or zinc dichromate passivating.
Manufactured in Australia by: JANDS Electronics Pty Ltd ACN 837
100~240VAC 50~60Hz 0.5A FUSE: 2A M205/240V
Jands Electronics Pty Ltd 40 Kent Road Mascot NSW 2020 Australia Phone: +Fax: +Internet: jandsinfo@jands.com.au
Specifications subject to change without notice. Manufactured by Jands Electronics Pty Ltd ACN 837. Note: While all due care has been taken in the preparation of this document, Jands Electronics shall not be liable for any inaccuracies or omissions which may occur herein.

TSS-ESPII60-0108-05

DMX-512 OUT

MIDI IN

1495 mm

T E C H N I C A L

S P E C I F I C A T I O N

S H E E T

ESPII24

DESCRIPTION FEATURES

24/48 CHANNELS / 12 SCENE MASTERS MEMORY LIGHTING CONTROL CONSOLE
Memory: Power supply: Consumption: Connector: 256 Kbytes Universal 100~240VAC 10% , 47~63 Hz 40W typical IEC 3-pin with integral fuse, switch and mains filter Fuse: 2A M205/240V MIDI in: 5-pin DIN socket DMX out: USITT DMX-512/1990 protocol (RS-485 standard)/ AXR 5-pin socket Analogue out: 0 ~ +10V DC/ Socapex 337 socket (option) Desk lamp out: 1 12V current limited, AXR 3-pin socket; 10W max. Display: 32 character, 2 line LCD, green backlight Dimensions: 640mm (W) 490mm (D) 108mm (H) Net/shipping weight: 11/14 kg
The ESPII 24 console is primarily designed for the control of devices featuring DMX input circuitry such as dimmers racks and colour scrollers. Units requiring an analogue input (0 to +10 volts) can also be controlled if the console is fitted with optional analogue outputs.
* DMX 512 output to control dimmers, moving lights and colour scrollers * Wide mode doubles the number of channel faders to 48 channels * Add/solo functions on all channels and scene masters * Three proportional softpatches to 512 DMX channels * LCD window for operator feedback * Up to 498 memories * Up to 30 scene pages * Up to 30 chases * Live or blind editing * Easy recording of scenes * Timed dipless crossfades * Effects (FX) section * 2 option ports (back panel) * Console linking to JANDS STAGE / ESP II / EVENT / EVENT PLUS consoles * CE approved: EN50081-1, EN50082-1, EN60950 *

SUPPLIED ACCESSORIES

2m IEC to Clipsal 463 power cable (export models may vary) Operating manual

ORDERING INFORMATION

MODEL/PART ESP II 24 PART NO. JND-ESPII24 JND-OPM JND-OPVM-VGA JND-MCARD JND-OPFD-ESPII JND-OPA60 CAE-18XR/CAE-18XR-Hi JND-FC-ESPII24

OVERALL SPECIFICATIONS

Control channels: Scene masters: 24 (normal), 48 (wide) 12
M-card module VDU interface/M-card module M-card Floppy disk drive module (DOS format) Analogue output module Desk lamp Flightcase

PRESET 1

PRESET 2

ADD LATCH

D.B.O. INHIBIT OFF

SCENE MASTERS

SOLO OFF

D.B.O.

EDIT SETUP OFF ON

CURSOR RATE ASSIGN

ALL REVERSE SCENE

P1 P2 FLASH MASTER

RANDOM

RECORD

CHASE FX XF

FUNCTION

ESP II 24 console

Electronics

Mechanical The console shall be a free standing device and be 640mm wide, 490mm deep and 108mm high. The console shall be constructed of 1.2mm steel, and shall be provided with a removable 1.2mm aluminium base for access to internal electronics. All metal surfaces shall be properly treated and finished in powdercoat or zinc dichromate passivating. The control surfaces shall be scratch-resistant 0.25mm Lexan with legends reverse silk-screened from behind. All operator controls and displays shall be provided on the top operating surface of the console. The chassis shall have sufficient ventilation holes to allow adequate convection cooling of the power supply, provided the ambient temperature does not exceed 40C (104F). Two (2) rear panel option slots shall allow the fitting of optional modules including M card / video output / analogue outputs and floppy disc drive. The console shall be the JANDS ESP II 24.

ARCHITECTS & ENGINEERS SPECIFICATION
The console shall provide control of up to 24 control channels (48 in wide mode) via the industry standard USITT DMX-512/1990 protocol. The DMX output socket on the back panel shall be a 5-pin AXR and the output voltages shall conform to standard RS-485 balanced serial data transmission. The console shall have a standard MIDI In 5-pin DIN connection. The console shall have two (2) banks of preset faders and a flash button with an integral light emitting diode (LED) per channel to allow direct manual control of stage lighting intensity. In addition a liquid crystal display (LCD) shall be provided to enable the operator to view operating parameters and to edit information. A memory capacity of no less than 256 Kbytes is required. The memory shall be battery-backed to prevent memory loss when switched off. The battery shall have a life of at least four (4) years. The console shall incorporate design techniques and electronic filters to comply with Australian and European Union directives on electrical safety and electromagnetic compatibility (EMC). The console shall be factory tested and cyclically burned-in for a minimum of 24 hours. Three (3) proportional DMX soft-patches shall be available. Operation

INHIBIT D.B.O.

Electrical

PRESET 1 PRESET 2

The console shall operate from a single-phase supply of 100 to 240 volts AC 10% with a supply frequency of 47 to 63 Hz and shall not draw more than 50 watts of power from a normal power outlet. The power inlet shall be a switched and filtered IEC mains socket with integral fuse, located on the back panel of the console.The power supply shall be a universal-type switched mode supply requiring no changing of internal links to accommodate different supply voltages. A 12V current limited supply terminated on a 3-pin AXR socket shall be provided on the back panel to power one (1) optional desk lamp. The console shall feature a desk linking function.

490 mm

TSS-ESPII24-0108-05
An error message shall be displayed to the operator should the software malfunction or be corrupted.

RATE ASSIGN

CURSOR
The operating software of the console shall incorporate diagnostic test routines that exercise the different systems on the CPU card. These test routines shall indicate to the operator (using LEDs and/or displays) the result (pass/fail) of the tests.

REVERSE

MASTER
Jands Electronics Pty Ltd 40 Kent Road Mascot NSW 2020 Australia Phone: +Fax: +Internet: jandsinfo@jands.com.au
Specifications subject to change without notice. Manufactured by Jands Electronics Pty Ltd ACN 837. Note: While all due care has been taken in the preparation of this document, Jands Electronics shall not be liable for any inaccuracies or omissions which may occur herein.
100~240VAC 50~60Hz 0.5A FUSE: 2A M205/240V
Manufactured in Australia by: JANDS Electronics Pty Ltd ACN 837