RELIABLE PERFORMANCE AND INDUSTRIAL QUALITY
MYLOCK 204D is equipped with a unique differential feed device designed to prevent fabrics from puckering or stretching. Two feed dogs are used : one feeds the appropriate amount of fabric for the setting on the stitch length dial and the other pulls or pushes the fabric according to the ratio set on the differential feed dial. The ratio of differential feed can be selected from a range of 0.5 to 2.2. Both stitch length and differential feed dials can be set at any time, even while sewing.
ADJUSTABLE CUTTING WIDTH Depending on the type or thickness of the material you sew, the seams may be too loose or too tight even when the tensions are correctly adjusted. In these cases, you can easily adjust the cutting width with this dial to correct the seam tension.
EASY ROLLED HEM CHANGE-OVER No need to change the needle plate for rolled hemming. Just slide the needle plate setting knob to the "R" position to switch the chaining finger to that for rolled hemming. RANGE OF DIFFERENTIAL FEED RATIO

1. 0 to 2. 2

Stretched edges on knit fabrics are prevented by setting the differential feed dial between 1.0 and 2.2.

1. 0 to 1. 0

1. 0 to 0. 5
Puckered edges on woven fabrics are prevented by setting the differential feed dial between 0.5 and 1.0.

Picot edge

Narrow hem
Threading chart and colorcoded thread guides make threading quick and easy.
Upper knife can be quickly and easily deactivated by the turn of a knob.

Rolled hem

Regular seam

SPECIFICATIONS

Knit stitch Wide seam
Seam type : 3 or 4 thread overlock N eedle : regular type (15x1SP) Seam length : 1-5mm Seam width : 3.5mm (Regular), 5.7mm (W ide), 2.0mm (N arrow) D ifferential feed ratio : 0.5-2.2 N eedle guard : front & back Cutting width adjustable : 3.1-5.1mm U pper knife : retractable Tension dials : numbered (one rotation) Threads guides : color-coded Presser foot : snap-on type Speed control : electronic

Decorative overedge

1-1 Kyobashi 3-chome, Chuo-ku, Tokyo 104-8311, Japan cable : JANOME TOKYO Telephone : 03-3227-2033 E-mail : support@gm.janome.co.jp Fax : 03-3281-1160
TC1204D01 Printed in Japan.

Australias No.1 Brand

MyLock 204D

Its sew easy with Janome

Reliable Performance and Industrial Quality

Features

Differential feed
The MyLock 204Ds differential feed device is designed to prevent fabrics from puckering or stretching. It is simple to operate and can be used to create special effects like gathering and lettuce leaf edging.

Adjustable cutting width Seam type: 3 or 4 thread overlock Differential feed ratio 0.5 2.2 Colour coded thread guides Easy rolled hem change-over Length control Numbered tension dials One hand thread cutter Retractable upper knife Snap-on feet At a glance threading chart Needle guard front & back Optional attachments Seam widths: 3.5mm (narrow) 7.5mm (wide), 2.0mm (rolled hem)

Adjustable cutting width

Depending on the type or thickness of the material you sew, the seams may be too loose or too tight even when the tensions are correctly adjusted. In these cases, you can easily adjust the cutting width with this dial to correct the seam tension.
Easy rolled hem change-over
No need to change the needle plate for rolled hemming. Just slide the needle plate setting knob to R position to convert the plate for rolled hemming.

AUSTRALIA

Janome Sewing Machine Co. (Aust) Pty. Ltd. P.O. Box 1383, Moorabbin 3189 Victoria www.janome.com.au
Manufactured to the highest standards
AVAILABLE FROM YOUR EXPERT JANOME RETAILER

NEW ZEALAND

Janome Sewing Machine Co. (NZ) Ltd. P.O. Box 139, Kaukapakapa, New Zealand www.janome.co.nz

JMA6964