Quick Start Guide

Power Up 1
PLUG IN JAWBONE FOR 50 MIN UTES ( YES , TH ERE S AN AC ADAPTER IN TH E BOX)

Pair 2

PHONE B LU ETOOTH SET TING : ON JAWBONE AUTOMATICALLY GOES INTO PAIRING MODE FIRST TIME ON ALL OTHE R TIMES: HOLD JAWBONE TALK AN D NOISE ASSASSIN BUT TONS: 2 SECONDS
INDICATOR LIG HT FL ASHES RE D + WHITE PHONE : SE ARCH FOR NEW DEVICES SE LEC T JAWBONE , E NTE R PASSCODE 0000

3 Share

MAKE THAT CALL (GO CHANG E TH E WORLD, WE KNOW YOU CAN)

Jawbone Overview

NoiseAssassin Button Talk Button
note Both Talk Button and NoiseAssassin Button are hidden beneath the external face of the headset. To activate either button, simply press on the areas indicated above.
Voice Activity Sensor Earbud e Earloop
The medium sized earloop and earbud are already fitted to your Jawbone at the factory.

1 Charging

You can charge your Jawbone headset via the wall charger, or via USB on your computer. Place the Jawbone headset in the socket with the jawbone logo facing upward.
Charge the battery fully on first use. Charge time 50 minutes. 80% charge after 35 minutes. Indicator light is RED while headset is charging / WHITE when headset is fully charged. Indicator light flashes RED when battery is low.

(continue to page 2)

2 Pairing
Your Jawbone headset automatically goes into pairing mode the first time you turn it on. In pairing mode, the indicator light flashes RED + WHITE
to pair for the first time
to man ually put you r he adset in pairing mode
Turn on your phones Bluetooth setting Press the Talk Button for 2 seconds Search for New Devices Select Jawbone Enter passcode 0000
Hold down the Talk Button and NoiseAssassin Button for 2 seconds until the indicator light flashes RED + WHITE. (Headset must be powered off to initiate). Pairing mode lasts for 3 minutes, or until successful pairing.
Jawbone comes with 4 earloops and 3 earbuds for maximum comfort. To wear Jawbone, tuck earloop behind your ear, place earbud snugly inside your ear, and rest Voice Activity Sensor on your cheek as shown in the diagram.
Jawbones patented NoiseAssassin requires contact with your face. Make sure the Voice Activity Sensor (VAS) is touching your face. If the VAS doesnt touch your cheek, the headset will not work properly.

4 Talk

Turn the Jawbone headset on or off by pressing the Talk Button for 2 seconds. To

answer a call ,

To chang e the volu me during a call, press the NoiseAssassin Button to cycle through the multiple volume levels. To turn noiseassassin off or back on during a call, press the NoiseAssassin Button for 2 seconds. note NoiseAssassin is always on by default.

press the Talk Button.

To re j ec t a call , press the NoiseAssassin Button while phone is ringing.

5 More

To initiate voice dialing , press the NoiseAssassin Button for 2 seconds in standby mode and then speak a command. To redial l ast n u mb er called, triple-tap the NoiseAssassin Button. To tu rn off the led , press the Talk Button 5 times while in standby mode. To answer an incoming press the Talk Button.

call while on a call ,

For additional information visit jawbone.com/support
2008 AliphCom. All Rights Reserved.

SUPERIOR COMMUNICATIONS

P R O P R I E TA R Y D E S I G N
JAWBONE 2 / VPC PACKAGING CONCEPT

JUNE 08

PACKAGING CONCEPTS 2008

CONTENTS

01 New Packaging Concept 02 Diagram -Quick Specs 03 Acrylic -Quick Specs
JAWBONE 2 - VPC PACKAGING CONCEPT

CLIENT

SCP ALIPH J. JOSEPH

PROJECT

JAWBONE 2 W VPC PACKAGING CONCEPT N/A N/A

CREATIVE DESIGN

VERSION

REVISION

PROGRAM/PROJECT MANAGEMENT
PACKAGING/CONFIGURATION MANAGEMENT

J. PAN

6-15-08
THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE SOLE PROPERTY OF SUPERIOR COMMUNICATIONS. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF SUPERIOR COMMUNICATIONS IS PROHIBITED.

8.2 cm

17.7 cm
12. 5 cm SUPERIOR CONCEPT JAWBONE 2 HEADSET AND VPC ACRYLIC BOX JAWBONE 2 HEADSET ACRYLIC BOX
SLEEVE WILL COVER UP 1.5 cm OF ACRYLIC FOR STABILITY

JAWBONE 12.5 cm

10.2 cm
SHORTER LESS EXPENSIVE ACRYLIC BOX WIDTH DIMENSION SAME AS JB2 SO BT HOLDER STAND CAN BE ADAPTED TO THIS PACKAGE.

ACRYLIC

WAFER SEALS HOLDS ACRYLIC AND ACCESSORIES BOX TOGETHER

WAFER SEAL

POWER UP
SBS BOX WITH LID HOLDS ALL ACCESSORIES IN ONE BOX

SLEEVE

SLEEVE WILL COVER UP 1.5 cm OF ACRYLIC FOR STABILITY WAFER SEALS HOLDS ACRYLIC AND ACCESSORIES BOX TOGETHER WAFER SEAL

ACCESSORIES BOX

11.7 cm
SLEEVE VAT DYE TIGHT FITTING