LIMITATIONS, EXCLUSIONS AND OTHER RIGHTS:
1. Except as provided herein, the Company makes no other warranties, express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose, at all such warranties are expressly disclaimed. Some states do not allow the exclusion of an implied warranty, so the above exclusion may not apply to you.
2.The Company is not responsible for defects or malfunctions in and/or damage to lighting systems where a sale is specifically made without warranty. In such sales the disclaimers of warranty and liability set forth above shall continue to apply.
3. The warranty gives you specific legal rights, and you may also have other rights, which vary from sate to sate.
If you discover a defect or malfunction during the period to which this Warranty applies, write or phone Super Vision Internationals Customer Service Department at 407-857-9900 for information on receiving warranty service.

rev 08/04

TECHNICAL SPECIFICATIONS FIBER OPTIC CALBES

SideGlow

.187 (4.8 mm)

.312 (7.9 mm)

.375 (9.5 mm)

.5 (12.7 mm)

Project:

.625 (15.9 mm)

Type: Voltage: Notes:

DESCRIPTION

SideGlow cable is a safe alternative to neon. It can change colors, is virtually unbreakable and is energy efficient. Suitable for interior and exterior applications, it is UV protected and has an algaecide and fungicide treated exterior jacket for maximum durability against the elements. SideGlow cable is string enough for amusement park rides, extreme cold as well as underwater applications. With no heat or electricity in the cable, typical lighting design restrictions are eliminated, creating a unrestricted of design possibilities. P-Clips or Track tubing allow for maximum versatility and flexibility in mounting.

SPECIFICATION FEATURES

Construction The SideGlow cable is constructed of.030/0.75mm diameter PMMA acrylic optical fibers of twisted sub-bundles twisted (sv42, sv84, sv126 only) within a flexible clear jacket. The fibers are twisted around a highly reflective PVC internal core that offers flexible stability with maximum light output. Size The cable diameter is determined by fiber quantity: 14 fibers: 32 fibers: 42 fibers: 84 fibers: 126 fibers:

UL Listed: Dry location UL file No. E166626 Electronical Rating: 120 VAC, 60 Hz /.70 Amps 220 VAC, 50 Hz /.40 Amps Lamp: 75 watt quartz halogen lamp 4,000 hours average life Power Consumption: 88 watts max Fiber Capacity: 2500 fibers w/.75mm fibers 225 SideGlow w/.75 mm fibers Safety Features: Internal 122F/ 50C thermal protector Power inlet 2 map fuse (extra fuse provided) Ambient Operation Temperature: -20F to 110F -29C to 44C Dimension: 140mm X 241mm X 146mm 5.5 X 9.5 X 5.75 add 11 (279.4mm) for fiber head and fiber to W position Weight: 7 lbs. 3.2 kg. Finish: powder coating, no bare metal, inside or outside Standard Feature: On-Off power and color wheel switch Mounting / Installation: surface or wall mount Ventilation: 21 CFM enclosure cooling 6 (152mm) clearance required to nearest surface. 24 (610mm) clearance required between each illuminator Warranty: 1 year on parts (excluding lamp) Standards: UL / cUL IP Rating: 20 dB Rating: 40dbA
MODEL SV750 - 75 watt quartz halogen lamp
POWER VAC, 60Hz 220 VAC, 50Hz 12 VDC
COLOR WHEEL EndGlow Color Wheels: ESTDC - standard (red, green, blue, yellow) ESTDS - sparkle (red, green, blue, yellow) EWS - sparkle white ESG - standard grey (soft sparkle effect) EC - clear (no color) Color Wheel 4 - 4 custom colors Color Wheel 8 - 8 custom colors
Note: Refer to color chart for options.

CONTROL SYSTEM N - None

Star Pro

(8m m)

6.5 ) mm (165

8.25 (20

This series illuminator has a 70 watt metal halide lamp rated at 9,000 lamp hours average life. UL and cUL listed for wet and dry applications. Recommended for endpoint fiber applications: signs, ceilings, floors and wall murals.
UL Listed: Wet & Dry Locations (Wet location, the unit must face up) UL file No.E202257 Electrical Rating: 120 VAC, 60 Hz / 0.9 Amps 220 VAC, 50 Hz / 0.45 Amps Lamp: 70 watt metal halide 9,000 hours average life Color temperature - 3000 K Power Consumption: 100 watts max. Fiber Capacity: 2500 w/0.75mm fibers Safety Features: Internal 185F/ 85 C thermal protector Ambient Operating Temperature: -20F to 110F -29C to 44C Dimensions: 8.25" W* x 12.5" L x 6.5" H 209mm x 318mm x 165mm add 15" (381mm) for fiber head and fiber to W position. Weight: 7 lbs. 3.2 kg Material/Finish: Powder coating, no bare metal, inside or outside Water, corrosion and chemical resistant Mounting / Installation: Horizontal for OUTDOOR and WET location Standard Features: On/off power and color wheel switch Ventilation: 115 CFM enclosure cooling Recommended distance from surface, 6(152mm) Recommended distance from another light source, 24(509mm) Warranty: 1 Year (excluding lamp) Standards: UL / cUL IP Rating: 23 dB Rating: 50dbA

MODEL StarPro - 70 watt metal halide 3000 K Illuminator
POWER 120 - 120 VAC, 60Hz 220 - 220 VAC, 50 Hz
COLOR WHEEL EndGlow Color Wheels: ESTDC - standard (red, green, blue, yellow) ESTDS - sparkle (red, green, blue, yellow) EWS - sparkle white ESG - standard grey (soft sparkle effect) EC - Clear Color Wheel (custom) COLORWHEEL 4 - (4 custom colors) COLORWHEEL 8 - (8 custom colors)
CONTROL SYSTEM N - None S - Synchronous

Litepro

Wet and dry UL listed illuminator with an MR-16 EYC, Dimmable 75 watt lamp rated at 4000 hours average life. DMX controllable and upto 2 color wheels - 1 color wheel and 1 sparkle wheel.
UL Listed: Dry Locations, Portable UL file No. E166626 Electrical Rating: 120 VAC, 60 Hz / 24 Amps Lamp: 150 Watts Halogen 1000 hours rated life Color temperature - 3200 K Fiber Capacity: 1000 fibers Ambient Operating Temperature: 32F to 110F 0C to 43.3C Dimensions: - Without mounting brakets and no fiber head 140mm x 121mm x 373 mm 5.51 x 4.76 x 14.96 - With mounting brakets and no fiber head 140mm x 133mm x 398 mm 5.51 x 5.24 x 15.67 Weight: 6.5 kg 14.33 lbs. Material/Finish: Steel Balck powder coating Mounting / Installation: Indoor - horizontal or vertical Theater bar/rail mount Ventilation: Double fan configuration, separate fiber head and lamp section cooling 23 CFM each comparment Warranty: 1 year on parts (excluding lamp) IP Rating: 20 dB Rating: 45dbA
MODEL LitePro - 150 watt Halogen Lamp Illuminator
POWER 120 - 120 VAC, 60Hz
COLOR WHEEL #1 N - None ESTDC - 4 standard color
COLOR WHEEL #2 N - None EWS-SP - 4" Lexan Sparkle wheel 4S-SB - 4 standard 8S-SB - 8 standard 4C-SB - 4 custom 8C-SB - 8 custom
CONTROL SYSTEM N - None D - DMX

SV1500

5 m) (127 m

(63 2.5.5 m m)

The SV1500 series illuminator with a 150MH/HID lamp rated at 10,000 hours average life. Recommended for interior EndGlow and SideGlow applications.
UL Listed: Dry Locations UL file No.E183283 Electrical Rating: 120 VAC, 60 Hz, 1.8 amps / 3 amps startup 220 VAC, 50 Hz, 1.2 amps / 3 amps 230 VAC, 50 Hz, 1.2 amps / 3 amps 240 VAC, 50 Hz, 1.2 amps / 3 amps 277 VAC, 60 Hz, 1.2 amps / 3 amps Lamp: 150 watt metal halide 10,000 hours average life 6000 hours - color shift Fiber Capacity: 500 fibers (w/0.75mm fibers) 288 fibers - Ultra SideGlow Power Consumption: 200 Watts, maximum Safety Features: Internal 185F / 85C thermal protector Kill switch when cover is open Ambient Operating Temperature: -20F to 110F -29C to 44C Dimensions: 7" x 12" x 5"* 178mm x 305mm x 127mm 10.5"H (266.7mm) with door open, add 2.5 (64mm) for fiber head and fiber to w positions Weight: 16 lbs. 7.3 kg. Material / Finish: Steel Black wrinkle powder coating Standard Features: 1/2 flexible conduit-ready for use with flexible metal conduit. Mounting / Installation: Indoor - horizontal or vertical. Note: For vertical mounting fiberhead must face down. Ventilation: Forced 115 CFM enclosure cooling Recommended distance from surface, 6 Recommended distance from another light source, 24 Warranty: 1 Year (excluding lamp) Standards: UL / cUL IP Rating: 20 dB Ratings: SV1500-47dbA , SV1500Q-36dbA

UL Listed: Dry locations UL file No.E166626 Electrical Rating: 120 VAC, 60 Hz / 1.8 Amps / 3 Amps (start up) 220 VAC, 50 Hz / 1.2 Amps / 3 Amps 230 VAC, 50 Hz / 1.2 Amps / 3 Amps 240 VAC, 60 Hz / 1.2 Amps / 3 Amps 277 VAC, 60 Hz / 1.2 Amps / 3 Amps Transformer: Magnetic Lamp: 150 MH/HID lamp rated at 10,000 hours 150 watt metal halide 6,000 hours color shift 4200K Fiber Capacity: 500 fibers (PAF30) 288 fibers - Ultra SideGlow(PAF40) 6 - (3 mm) PAF120EGW Power Consumption: 200 Watts, maximum Safety Features: Kill switch when side access door (for lamp replacement) is opened Internal 185F / 85C thermal protector Ambient Operating Temperature: -20F to 110F -29C to 44C Dimensions: 7.4"(W) x 12"(L) x 6"(H) 187.96mm x 305mm x 152.4mm Add 2.7" / 68.58mm for fiberhead Material / Finish: Steel Silver Metalic Water, corrosion and chemical resistant Mounting / Installation: Indoor - horizontal Ventilation: Forced 21 CFM enclosure cooling Warranty: 1 Year (excluding lamp) IP Rating: 20 dB Rating: 40dbA
MODEL ES150 - 150 Watt HID/MH Illuminator

LAMP 42 - 4,200 K

POWER VAC, VAC, VAC, VAC, VAC, 60Hz 50Hz 50Hz 50Hz 60Hz

COLOR WHEEL N - None

Eclipse II

(35 3m m)

7.13 ) mm (181
Wet and dry UL listed illuminator with a 250 watt HID lamp rated at 4000 hours average life. Recommended for SideGlow interior and exterior applications. Eclipse II is the most powerful illuminator that Super Vision offers.
UL Listed: Wet & Dry Locations (Wet location, a unit must be installed on a horizontal mount (face up) UL file No. E202257 Electrical Rating: 120 VAC, 60 Hz / 4.6 Amps 220 VAC, 50 Hz / 3 Amps 277 VAC, 60 Hz / 2.5 Amps Lamp: 250 watt metal halide 4000 hours average life Color temperature - 4200 K Power Consumption: 600 watts max. Fiber Capacity: 500, 0.75mm fibers/ 288(1mm) fibers Safety Features: Internal 185F/ 85 C thermal protector Ambient Operating Temperature: -20F to 110F -29C to 44C Dimensions: 12" W* x 13.80" L x 7.13" H 305mm x 353mm x 181mm add 18.6" (472mm) for fiberhead and fiber to W position Weight: 27 lbs. 12.2 kg Material/Finish: Galvanneal Powder coating, no bare metal, inside or outside Water, corrosion and chemical resistant Mounting / Installation: Surface or wall mounthorizontal fiberhead direction only. Must be flush mounted to surface for proper air seperation between compartments Ventilation: 115 CFM enclosure cooling 60m3/h fiber tunnel cooling Warranty: 1 Year (excluding lamp) Stand ards: UL / cUL IP Rating: 23 dB Rating: 56dbA

Power: 120 or 240 VAC, 50-60 Hz 25 watts maximum UL listed Class 2 power adapter Dimensions: 1.75 x 19 x 6.5 (45mm x 483mm x 165mm) Operating Temperature: 0 - 35C (32 - 100F) 0 - 90% relative humidity, non-condensing Front Panel: Power LED Acknowledge (ACK) LED Error LED Serial Activity LED 8 Push buttons Rear Panel: Programming Port DB-9M 1 Serial Port DB-9M Discrete Inputs DB-37F Power Barrel Connector Serial Port: RS-232C 300 baud - 38.4 kbaud 7, 8 or 9 Data Bits 1 or 2 Stop Bits All parity types Inputs: (16) TTL inputs, internally pulled up to +5 VDC, suitable for contact-closure operation. Trigger latency <1 frame. Show Memory: 32 Kbyte EEPROM. Nonvolatile, robust memory retains show data permanently with no battery backup required.
CALL FOR LATEST SPECS 17.0193 18.0183 18.9001 18.0182 CF-1/4W-121JTR 10.0651 10.0650
DMX MACHINE DMX Data Cable Sold by the Foot Replacement Screw 4-40 x.1875 (4.8mm) socket cap screw S/S Replacement Screw 4-40 x.5 (13mm) socket cap screw S/S DMX Tool for Socket Cap Screw Terminating Resistor 120 Ohm Replacement DMX Stepper Motor 6-wire DMX board

Color Wheels

DESCRIPTIONS Color and dimming wheels add a dynamic dimension to the creative possibilities of fiber optic lighting. A variety of colors are available in a standard four and eight color wheel, or any multitude of combinations can be achieved with any of 16 different colors. Color wheels are made of dichroic glass. Vinyl color and sparkle wheels are used for endpoint applications to add color and sparkle to starfield ceilings, pavings and endpoint signage. Dimming wheels are made of corrosion resistant stainless steel and are available in a variety of patterns to achieve any number of dimming effects.
SPECIFICATION FEATURES Color Wheels Dichroic coated glass color wheels are available in a variety of 16 colors plus clear. Dichroic wheels for use in metal halide light sources. Vinyl coated glass color and sparkle wheels are available in a variety of colors. Vinyl wheels for use in halogen light sources. Four Dichroic Standard Colors:1 Clear (#0), Hot Pink (#3), Lime Green (#12), Cyan (#8). Eight Dichroic Standard Colors: Clear (#0), Cyan (#8), Yellow (#13), Turquoise (#9), Orange (#15), Dark Blue (#5), Hot Pink (#3), Lime Green (#12). Four Vinyl Standard Colors: Red, Green, Blue, and Yellow Eight Vinyl Standard. Dimming Wheels Dimming wheels are made from dichoric glass and aluminum.

dimming wheel

lexan wheels
MODEL ESTDC ESTDS EWS ESH EC COLORWHEEL4 COLORWHEEL8 EWS-SP 4S-SB 8S-SB 4C-SB 8C-SB SVCW SVDIMWHEEL SVDIMWHEELNEW Standard color wheel ________________ Standard sparkle ____________________ White sparkle ______________________ Standard grey filter gel _______________ Clear wheel ________________________ 4 custom colors (specify) _____________ 8 custom colors (specify) _____________ 4" sparkle _________________________ 4 colors - standard __________________ 8 colors - standard __________________ 4 colors - (choose) __________________ 8 colors - (choose) __________________ 4 or 8 color - custom (specify) _________ Dimming wheel for standard units_______ Dimming wheel for dimming units _______

Construction Fixture housing is made of spun brass or aluminum and finished for lasting beauty and durability. Finishes include natural brass and aluminum, black aluminum and white aluminum. Eyeball provides 45 rotation. Equipped with spring and screws for choice of mounting fixture tightly into ceilings or display cases. Compression fitting hold fibers tightly into fixture. 2 (50.8mm)diameter. Cabling The EB-900 accommodates 4 strand through 75 strand EndGlow cables (see Endglow Cable spec sheet for detailed cable information)

EYEBALL LENS

EB900 EB901 EB902 EB903
ENDGLOW CABLES (Order separately) SV4EG SV8EG 4 fibers 8 fibers
Brass Aluminum Aluminum-black Aluminum-white
SV12EG 12 fibers SV25EG 25 fibers SV50EG 50 fibers SV75EG 75 fibers

ESDL-WHITE

1.953 49.60mm
1.23 31.20mm 2.42 61.50mm 2.62 66.60mm

1.42 36.30mm

.44 11.05mm.56 14.25mm

ESDL-BLACK

MINIMUM DIMENSION

MAXIMUM DIMENSION

ESEB-BLACK

1.99 50.60mm

2.65 67.45mm

2.86 72.56mm

ESEB-WHITE
The ESDL Series, adjustable beam fixtures are designed for use with a single 3mm jacketed fiber and ES150 illuminator. Beam angles are set, using 2 rotating thumb screws to one of these positions. 15, 25, or 40
Construction Fixture housing is made of aluminum and finished for lasting beauty and durability. Finish is white or black aluminum. Compression fitting holds fiber tightly into fixture. Cabling The ESDL fixture accommodates 1 - SVPAF3mm fiber. (See spec sheet on page A4 for detailed cable information)
ADJUSTABLE BEAM FIXTURES ESDL-WHITE ESDL-BLACK ESEB-WHITE ESEB-BLACK White, Aluminum Black, Aluminum White, Aluminum Black, Aluminum
JACKETED ENDPOINT FIBERS (Order separately) SVPAF3MM 1 fiber

2" 50.8mm

1.1875" 30.16mm
.5" 12.7mm.1875" 4.76mm
Screw mounted stainless steel fixture with glass convex lens.
Construction Stainless steel housing, glass lens, fiber tight connector to secure fiber optic cable in place. Cabling The SS400 accommodates up to 150 fibers.
STAINLESS DOWNLIGHT SS400 Screw-mounted fixture
ENDGLOW CABLES (Order separately) SV4EG SV12EG SV25EG SV50EG SV75EG SV150EG 4 fibers 12 fibers 25 fibers 50 fibers 75 fibers 150 fibers
1.25 (32 mm).39 (10 mm).47 (12 mm)

.39 (10 mm)

.59 (15 mm)
2.79 (15 mm) (.71 mm).39 (10 mm).19

.39.59 (10 mm)

(10 mm).19 (5 1.2 mm)

(31 mm)

(10.5 mm)

(15 mm).47 45

(16 mm)

(12 mm)

(5 mm)
2.04 TECHNICAL SPECIFICATIONS 2.2 (56 mm) (52 mm).59 FIXTURES Crystals (15 mm)

.88 (22.5 mm)

1 (42.
1.2 (32 mm) 2.04 (31.5 mm)

.98 (25 mm)

1.7 (.44 mm)
2.9 (76 mm).59 (15 mm) 2.2

ENDGLOW CABLES (Order separately) SV4EG 4 fibers SV8EG 8 fibers SV12EG 12 fibers

2 (51 mm)

Underwater Fixtures
2 (51 mm).35 (9 mm) 3.5 (89 mm)

3.5 (89 mm)

SVWNF-WHITE (PLASTIC BULLSEYE LENS)
SVWNFC-WHITE (CONVEX GLASS LENS)
SVWNFF-WHITE (GLASS BULLSEYE LENS)

SVLKEY2

lens light

lens key

Underwater lens for pools, fountains and ponds. Three lens options are available. Plastic, glass, concave and flat glass.
SPECIFICATION FEATURES (51 mm)
Construction 3.5 (89 mm) The underwater lens fixture is made of molded plastic with a clear acrylic lens; its gasketing prevents water leakage, making it perfect for pool and 3.5 (89 mm) pond applications. Each fixture features a nylon compression held which securily holds the fiber cabling. Each fixture is suitable for wet locations. Cabling 300 strand fiber capacity
UNDERWATER LENSES SVWNF SVWNFF Plastic bullseye lens 3.5 (89 mm) Flat glass flood lens
TOOLS SVLKEY2 Aluminum lens key
SVWNFC Convex glass spot lens SVLKEY2 Aluminum lens key
Note 1: Specify for gunite/concrete, fiberglass or vinyl liner pools when ordering. Note 2: Black housing available, must specify at time of order.

Fiber Optic Curtain

Fiber optic curtain with fiber optic points of light. Density and point sizes are customer requirements.
Fabric: Facing surface - 16oz. Black Commando Cloth, FR Lining - Black Ranger Cloth. FR Fire Retardant Certification: NFPA 701 Small Scale. Certified in accordance with Rule 6.1 NYC Board of Standards and Appeals, Section C19 of the NYC Administrative Code, and NYC Fire Department Directive 1-78. State of California - Title 19. Finished Curtain Weight: 0.22 lbs. (0.09kg.) per square foot Fiber Pattern Density: 1 circuit - 2.5 fibers per square foot 2 circuits - 3.12 fibers per square foot 3 circuits - 3.75 fibers per square foot Fiber: Item: Max. points per illuminator: 2500 Standard Construction Fiber Tip Size - 0.75mm Commando/Ranger(2.25 fibers per sq.ft.) Protective Tubing Length (umbilical cord) 5 (1524mm) = 60 x 25.4mm per inch Upgrade: Fiber Bushing - 1D x 8L StarPro - see page 26. Fiber Tube Location - centered, unless otherwise specified SV750 - see page 25. (alternate tube location may be charged at an additional rate) ORDERING INFORMATION

Fiber Count / Capacity per waterfall 1ft. 2ft. 3ft. 4ft. 5ft. 6ft. 7ft. 8ft. waterfall waterfall waterfall waterfall waterfall waterfall waterfall waterfall = = = = = = = = 25 fibers 50 fibers 75 fibers 100 fibers 150 fibers 150 fibers 175 fibers 200 fibers
TECHNICAL SPECIFICATIONS LED Lighting

Flex-LED - Color

Clear Red : 18 LEDs

.78 (9.9 mm)

.68 (17.4 mm)

.78 (19.89 mm)

Blue , Green : 24 LEDs

.36 (9.3 mm)

MOUNTING CLIP
.28 (7.17 mm).69 (17.5 mm)

12 (304.8 mm)

FX CLIP TOP VIEW

FX CLIP SIDE VIEW

Amber, Deep Red, Orange : 25 LEDs *Note : Dimensions typical for all FlexLED color strips
12 VDC Flexbile strip with LED's for cover lighting, display cases, channel letters and signage.
Features Connect strips together via jumper cables 4 jumper sockets per strip for easy connection to other FlexLed strips The FlexLED strips can easily be cut in the field. Bend radious : 1.5" (38mm) The FlexLED system The FlexLED strip - available in 1 foot segments and 6 colors 12V power supply - available in a full range if wattage Power/Jumper cables to connect the strips together withour solder Mounting clips for easy installation Energy Efficient One 12" (305mm) red segment uses 1.5 to 1.8 watts per foot deep red, clear red, amber, and orange. 3.2 watts per foot for green, and blue - Maximum distance for power cable to FlexLED strip is 30 feet (a0m) - Power supplies are available in ranges from 60 to 300 watts. Standards UL/ cUL/ ETL (tested to UL48) Must be used with a UL approved Class 2 power supply Maximum Current Per PCB for Green, blue - 260mA per strip Maximum Current Per PCB for Clear Red, Deep Red, Orange, Amber - 180mA per strip Number of LEDs per strip - 18 - Clear Red 24 - Green, Blue 25 - Deep Red, Orange, Amber PCB Length - 12" (305mm) Input-Voltage - 12VDC Connector Power Rating - 3A LED type - AllnGap (Deep Red, Clear Red, Orange, Amber) high flux InGan (Green, Blue) high flux PCB material - UL 94-V0 FR-4 G10 Fiberglass LED spacing - 0.5"(13mm) for 24 LED - Green, blue 0.47" (12mm) for 25 LED - Deep Red, Orange, Amber 0.67" (17mm) for 18 LED - Clear Red PCB width - 0.4" (10mm) PCB thickness - 0.037" (0.94mm) Cable - FXPC Cable wiring gauge - #22Awg standard Optical data - 100 beam spread Envionmental specs - -65F to 130F, 0 - 100% humidity (no direct rain)

Project: Type: Voltage:

FLEX-led strip 10.0300 red 12 10.0301 clear red 12 10.0302 amber 12 10.0303 blue 12 10.0304 green 12 10.0306 orange 12
MOUNTING CLIP FXCLIP mounting clip 30 per bag

Flex-LED - White

0.7" 17.76mm

FlexLED strip FX clip

.78" 19.89mm

.36" 9.30mm

White : 24 LEDs
FX CLIP TOP VIEW FX CLIP SIDE VIEW

EVLFL FLOOD STRIP EVLFL-W EVLFL-R EVLFL-G EVLFL-B EVLFL-A White LED FLOOD STRIP Red LED FLOOD STRIP Green LED FLOOD STRIP Blue LED FLOOD STRIP Amber LED FLOOD STRIP
POWER 12V 24V 12 VDC for white/ green/ blue 24 VDC for red/ amber
CONSUMPTION PER MODULE MAXIMUM OF MODULES WITH ONE POWER SUPPLY VIEWING ANGLE
2.4 W 35 modules = 15m/ 49.with SMD 50 - 120 with LED of 3mm. according to choice 45cm/ 17.71
Endcaps terminate a section. Closed endcaps are sealed, open endcaps allow cable connection.
1.01 (25.75 mm).9 (24.25 mm)

ML Light Bar

Snap on clip for easy mounting
Color options include: 3500K white (standard)

LED LIGHT BAR

0.8 (20.4 mm)
Tubular housing ML SERIES

0.92 (23.3 mm)

.65 (16.5 mm)
Optional watertight fitting and cable strain relief for pass through cable can be installed on each end for attaching additional sections.
SuperVisions high brightness single row mono-chromatic LED light strips are perfect for decorative lighting applications where colorful, bright light is required. LEDs inherently are long lasting and provide a life expectancy of approximately 100,000 hours or more according to their manufacturers. This technology helps to assure low maintenance costs and no unsightly failed bulbs. LEDs exhibit ruggedness with excellent tolerance for vibration and shock prone applications, unlike incandescent. Your application will benefit from the tremendous energy savings and bright colors generated by our our LED strip lights! All SuperVision Series strip lights are safer and more energy efficient than neon, fluorescent or incandescent lighting. When used as a replacement for conventional lighting, typical savings can be 10 to 25 times less energy usage.
3.5 INCH LIGHT STRIP Input Voltage Input Current Power LED's LED Spacing LED Type LED Color Rendering Index Color Temperature ICI Chromaticity Luminous Flux Strip Length Strip Width Power Connect Terminal Maximum Numbers of Strips per Power Run Maximum Current Recommmended connection Wire Environmental 0-95 Humidity Non Condensing* 24 VAC 40 mA 1 Watt 10 per strip (.350 Inch) GaN White LED's 70 - 85 3500K X=.392 Y=.Lumen 3.5 Inches (.65 inch) (.187" x.032" Quick Connect) Ampere 16 AWG -40 to +40 C.
ML-SERIES 14 INCH LIGHT STRIP Input Voltage Input Current Power LED's LED Spacing LED Type LED Color Rendering Index Color Temperature ICI Chromaticity Luminous Flux Strip Length Strip Width Power Connect Terminal Maximum Numbers of Strips per Power Run Maximum Current Recommmended connection Wire Environmental 0-95 Humidity Non Condensing*
24 VAC 160 mA 3.85 Watt 40 per strip (.350 Inch) GaN White LED's 70 - 85 3500K X=.392 Y=.Lumen 3.5 Inches (.65 inch) (.187" x.032" Quick Connect) Ampere 16 AWG -40 to +40 C.
ACCESSORIES Polycarbonate Tubing (.81" OD Clear Virgin PC) Closed Endcap, Water Tight Clear Vigin PC Open Endcap, Indoor Clear Virgin PC Water Tight Endcap set 3 Pcs and Kraton Ferrule Coupler Clear Virgin Polycarbonate Nova II HD mouning clip Clear Virgin PC Silicone Adhesive GE TSEWatt 24VAC Power Supply 120 VAC Primary

ML LIGHT BAR

EV0030 White LED 3.5" WET Assembly EV0031 White LED 14" WET Assembly

CL Light Bar

Color options include: green amber red 5000K white (standard) green amber red 5000K white (standard) Tubular housing RGB CL SERIES
Brightness color changing strip light is a stand alone 12VDC module with a fully integrated controller. On board are adjustable potentiometers that control the modulation of each color for faster or slower changing cycles, this crating many random color effects. LEDs are inherently rugged and lost lasting with a life expectancy of approximately 50,000 to 100,000 hours according to their manufacturers. LEDs exhibit excellent tolerance for vibration and shock, unlike incandescent lighting. CL Series light bars are safer and more energy efficient than neon, fluorescent or incandescent lighting. Typical savings can be 10 to 25 times less energy usage over incandescent lighting.
CLSeries 3106 RGB Color Changing 6 LED Strip 12VDC Input Voltage 200mA per strip Input Current Max. < 2.5 Watt Power 16 Max. Strips per Run 18 Number of LEDs Analog Steady Rising,Falling Ramp Modulation Type Rise-Fall.25-5 seconds, adjustable Cycle Time True analog RGB array produces Colors infinite color patterns Power MOSFET Driver Type 2A Connector Power Rating LED Type TI 3/4 (5mm) AlInGap (Red) InGaN (Blue,Green) UL 94-VO FR4 G10 fiberglass PCB Material LED Spacing per RGB triad PCB Length PCB Width PCBThickness Recommended Controllers Product Life Optical Data Environmental Specs STANDARDS 1.0.650 0.062 EnVision series 400,400D > 100,000 hours Depends on LED selection (-20) to 50* C, 0-100% Humidity CL Listed

CL LIGHT BAR

EV0014 EV0015 EV0016 EV0017
RGB LED 4" Dry Assembly RGB LED 4" Dry Assembly RGB LED 4" Dry Assembly RGB LED 4" Dry Assembly
CD100 Analog Color Changing Controller
Super Visions CD100 is designed to provide power and control signals to CL Series (red, green, blue) color changing LED light bar. Using the CD100 technology, this controller generates smooth transitions through millions of random colors. Up to two channels and a total of 16 feet of color changing strip light can be connected to each CD100. Control potentiometers adjust the modulation speed of each of the three (RGB) color generators. This can create a broad range of effects from slow soothing colors to fast and lively tempos. Restaurants, clubs, casinos and signs are a few of many applications that can benefit from this system. The CD100 is priced to fit many applications that previously could only be accomplished with systems costing much more.

GREEN EV0304 EV0304-220 EV0304C
120V GREEN LED A-19 LAMP 220V GREEN LED A-19 LAMP 120V GREEN LED LAMP; CLEAR COVER EV0304C-220 220V GREEN LED LAMP; CLEAR COVER EV0304D 120V GREEN LED LAMP; DIMPLE COVER EV0304D-220 220V GREEN LED LAMP; DIMPLE COVER WHITE EV0305 EV0305-220 EV0305C 120V WHITE LED A-19 LAMP 220V WHITE LED A-19 LAMP 120V WHITE LED LAMP; CLEAR COVER EV0305C-220 220V WHITE LED LAMP; CLEAR COVER EV0305D 120V WHITE LED LAMP; DIMPLE COVER EV0305D-220 220V WHITE LED LAMP; DIMPLE COVER
ORANGE EV0306 EV0306-220 EV0306C
120V ORANGE LED A-19 LAMP 220V ORANGE LED A-19 LAMP 120V ORANGE LED LAMP; CLEAR COVER EV0306C-220 220V ORANGE LED LAMP; CLEAR COVER EV0306D 120V ORANGE LED LAMP; DIMPLE COVER EV0306D-220 220V ORANGE LED LAMP; DIMPLE COVER

0.8 ( 20 m

LED LAMP CLEAR WITH DIMPLE COVER

2.4 (60 mm)

.61 (15.50 mm

LED Flood Light

LED FLOOD LIGHT FIXTURE
The LED Flood Light is a surface flush mounted light fixture utilized in sidewalks and other areas where a lighted flat surface is desired.
Model Number: EV213WS & EV213WS-CLR Dimensions: 9.8 (250mm) x 2.6 (67mm) (without gland/cable connector) Fixture Diameter: 10.23 (260mm) / designed for 9.8 (250mm) hole Depth: 2.28 (58mm) plus Kopex connector. Glass: 96 units with clear Flat tempered glass and 524 units with lenticular tempered glass lens (ribbed) Power supplies: DMX enclosure or interface supplied shall be 220/240 VAC. DMX 512 controlled, DMX controll card integrated in the power supply DMX enclosure. Stainless Steel Housing Outdoor Installation Includes three mounting half turn clamps and fixed locking tab mechanism for each clamp. Title Degree to be controlled and adjusted using an adjustment screw mechanism DMX address switches secured under the cover Each fixture will have its own designated programming addressable on site by programmer of choice. All cable shall be high rated shielded cable. The end of the cable will be provided without termination. Two XLR connectors and RJ45 connectors for each fixture shall be supplied seperately. Each fixture shall be supplied with Kopex cable connector at the bottom Standards: UL IP Rating: 56

Color combination: 16.7 million colors at 24 bit RGB additive color mixing Light Source: High Power Light Emitting Diodes (LEDs) Available Beam Angles: 10, 25 (standard), 45, 60, 90 Housing: Cast Aluminum Alloy or Stainless Steel Protective Rating: IP67 Control System: DMX512 Cabling: Multi-core control/ data cable Power Consumption: 25 watts at 12 VDC Submersion Depth: 5 meters (15 feet) Submersion Depth: 0.05331/mm Temperature environment: -20C to 40C (-4F to 104F ) Dimension: 255mm(W) x 220mm(D) x 245mm (H) 10.04(W) x 8.66(D) x 9.64(H) Weight: 7 lbs (3.1 kg) Available Housing Color: Black, White or Stainless Steel (submersible only) Warranty: 2 years Voltage Rated: 12 VDC Power Consumption: 25W
COLOR RED GREEN BLUE WHITE 1 METER
351.1 Lux 614.3 Lux 271.0 Lux 1137.5 Lux

3 METER

39 Lux 68.5 Lux 29.7 Lux 126.2 Lux

5 METER

13.5 Lux 25.2 Lux 11.2 Lux 45.9 Lux

TOTAL OUTPUT

93.7 Lux 163.5 Lux 72.3 Lux 303.4 Lux
9 Watts 9 Watts 9 Watts 27 Watts

EFFICACY

10.4 lm/w 18.2 lm/w 8.0 lm/w 11.2 lm/w

* COLOR MODES

Fixed Color: Single static color display Color Wash: Color change Cross Change: Two color interchanging cycles Random change: Color changes in random orders Fixed Color Strobe: A rapid strong flash of light in a single color Variable Color Strobe: A sequence of color appears in a series of strong flash in variable colors * All Effects achieved through DMX programing
ORDERING INFORMATION SaVi-S-001 MODEL SaVi-S-001 - Indoor/ Outdoor/Water Submersible RGB LED Fixture VOLTAGE Blank - 120 volt 240 - 240 volt BEAM ANGLE *10 - 10 Beam Angle 20 - 25 Beam Angle *45 - 45 Beam Angle *60 - 60 Beam Angle *90 - 90 Beam Angle

*8-10 week lead time

ACCESSORIES 025000 - Power Supply 120V (1 per six SaVi Spots) CE145000 - Junction Box (1 per six SaVi Spots) SaVi - SC120 - Smart controller 120 volt SaVi - SC240 - Smart controller 240 volt (1 per system required)

(1.77 ) (1.18 )

375mm (14.76) (27 )

SaVi Accent

(1.3 )

SaVi Accent 100

(1.77 ) (1.18 ) (1.3 ) 33 (1.3 ) 33

SaVi Accent 200

(1.77 ) (1.18 ) 30

1035mm (40.75) (27 )

SaVi Accent 300
SaVi Accent RGB LED linear lighting tube is a low voltage Indoor/Outdoor rated system. SaVi Accent tube uses high brightness red, green, and blue LEDs as its illumination source. The 24V tube can be controlled and powered by a pre-programmed stand alone controller that is DMX compatible. The tube is constructed of durable acrylic with 45 high power LEDs per foot.

Color combination: 3 primary, 3 secondary, white, fades, strobes Light Source: 45 High Power Light Emitting Diodes/FT (LEDs) Available Beam Angle: 85X40 Luminance Flux: 21.3 lm Construction: Clear Acrylic Tube Power Consumption: 3.5W per foot Protective Rating: IP64 Rated Power: 3.5W per foot Rated Current: 0.29A per foot Rated Voltage: 24VDC Dimensions: 45mm(W) x 375 / 705 / 1035mm(L) x 45mm(H) 1.77(W) x 14.76 / 27/ 40.75(L) x 1.77(H) Weight: 0.44 lbs (0.2 kg) Temperature Range: -20C to 40C -4F to 104F ) Max Connectable Unit No.: 60 units - Accent 100 Control System: SaVi Accent#: Savi-AC120 Power Supply 02.8000: Order separately Warranty: 2 years
7 color change mode in sequence 7 color flash mode in sequence 7 color fade mode in sequence 7 color change mode in sequence (mixing modes of jumping, flashing and fading) Red, Green, Blue intensity adjustment Color changing speed adjustment * Optional DMX triggering
MODEL SaVi Accent 100 - 375mm (11.76) length tube SaVi Accent 200 - 705mm (27) length tube SaVi Accent 300 - 1035mm (40.75) length tube
Maximum number of units connected SaVi Accent 100 = 60 Maximum number of units connected SaVi Accent 200 = 30 Maximum number of units connected SaVi Accent 300 = 20
CONTROL SYSTEM SaVi-AC120 - switchable 120/controller
ACCESSORIES Mounting Clips Power Supply - 02.8000 Extension Cables 17.4002 - 2 cable 17.4005 - 5 cable 17.4010 - 10 cable Adapter 16.6004 - 3 pin male adapter 16.6005 - 3 pin female adapter

5) (2.9

SaVi Tube

(39.37 )

SaVi Tube produces a vast array of color effects using red, green, and blue LEDs integrated with micro-electronic technology and digital technology encased in a high quality milky white polycarbonate tube mounted on an aluminum base. Lighting effects include color chasing, color fading, gray scale change, flash with adjustable speed, and DMX capabilities for even further flexibility. Includes a built in transformer allowing easy installation without the need for separate power components. SaVi Tube comes with an independent DMX control system with pre-program effects.
Color combination: 3 primary, 3 secondary, white Light Source: 144 High Power Light Emitting Diodes (LEDs) Housing: Polycarbonate tube with aluminum base Protective Rating: IP64 Control system (order separately): Comes with proprietary DMX option Order# : SaVi-TC-120 - 120 volt SaVi-TC-240 - 240 volt Cabling: Multi-core control/ data cable + power cables Tube Input: 120VAC or 240VAC Temperature environment: -4F to 104F (-20C to 40C) Dimension: 1000mm(W) x 50mm(D) x 75mm(H) 39.37(W) x 1.97(D) x 2.95(H) Weight: 1.5kg (3.3 lbs) Warranty: 2 years

Freez.

Poder de Cong kg/24 h

Classe

Assistenza Attiva 7 giorni su 7
Se nasce il bisogno di assistenza o manutenzione basta chiamare il Numero Unico Nazionale 199.199.199* per essere messi subito in contatto con il Centro Assistenza Tecnica pi vicino al luogo da cui si chiama. attivo 7 giorni su 7, sabato e domenica compresi, e non lascia mai inascoltata una richiesta.
* Al costo di 14,25 centesimi di Euro al minuto (iva inclusa) dal Lun. al Ven. dalle 08:00 alle 18:30, il Sab. dalle 08:00 alle 13:00 e di 5,58 centesimi di Euro al minuto (iva inclusa) dal Lun. al Ven. dalle 18:30 alle 08:00, il Sab. dalle 13:00 alle 08:00 e i giorni festivi, per chi chiama dal telefono fisso. Per chi chiama da radiomobile le tariffe sono legate al piano tariffario delloperatore telefonico utilizzato. Le suddette tariffe potrebbero essere soggette a variazione da parte delloperatore telefonico; per maggiori informazioni consultare il sito www.aristonchannel.com.

Operating Instructions

FRIDGE Contents

Installation, 10

Positioning and connection
Description of the appliance, 11

Overall view

Start-up and use, 12
Starting the appliance Setting the temperature Using the refrigerator to its full potential

Maintenance and care, 13

Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Defrosting the appliance Replacing the light bulb

Precautions and tips, 14

General safety Disposal Respecting and conserving the environment
Troubleshooting, 15 Assistance, 16

Installation

! Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
Positioning 1. Place the appliance in a well-ventilated humidityfree room. 2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy. 3. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.). Electrical connections After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following: The appliance is earthed and the plug is compliant with the law. The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W). The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V). The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets. ! Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. ! The cable must not be bent or compressed. ! The cable must be checked regularly and replaced by authorised technicians only (see Assistance). ! The manufacturer declines any liability should these safety measures not be observed.

Description of the appliance
The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.

TEMPERATURE control

Removable lidded shelf with EGG TRAY

SHELVES

Removable multipurpose SHELVES
Compartment for a 2 LITRE BOTTLE FRUIT and VEGETABLE bin BOTTLE shelf
Varies by number and/or position.

Start-up and use

Starting the appliance
! Before starting the appliance, follow the installation instructions (see Installation). ! Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate. 1. Insert the plug into the socket and ensure that the internal light illuminates. 2. Turn the TEMPERATURE ADJUSTMENT knob to an average value. After a few hours you will be able to put food in the refrigerator.
SHELVES: with or without grill. Due to the special guides the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf.
Using the refrigerator to its full potential
Use the TEMPERATURE ADJUSTMENT knob to adjust the temperature (see Description). Place only cold or lukewarm foods in the compartment, not hot foods (see Precautions and tips). Remember that cooked foods do not last longer than raw foods. Do not store liquids in open containers. They will increase humidity in the refrigerator and cause condensation to form.

Setting the temperature

The temperature inside the refrigerator compartment automatically adjusts itself according to the position of the thermostat knob. 1 = warmest 5 = coldest We recommend, however, a medium position. The cooling section of the refrigerator is located inside the back wall of the refrigerator compartment for increased space and improved aesthetics. During operation, the back wall will be covered in frost or water droplets depending on whether the compressor is operating or paused. Do not worry, the refrigerator is functioning normally. If the TEMPERATURE ADJUSTMENT knob has been set on high values with large quantities of food and with a high ambient temperature, the appliance can operate continuously, resulting in excessive frost formation and excessive energy consumption: compensate for this by shifting the knob towards lower values (defrosting will occur automatically). In static appliances, the air circulates in a natural way: the colder air tends to move downwards as it is heavier. The food should be stored as follows:

Fresh fish and meat Fresh cheese Cooked food Salami, bread loaf, chocolate Fruit and vegetables Eggs
Above the fruit and vegetable bins Above the fruit and vegetable bins On any shelf On any shelf In the fruit and vegetable bins On the shelf provided

6htrrvvqrur rsvtrh

Butter and margarine On the shelf provided Bottles, drinks, milk On the shelf provided

Maintenance and care

Switching the appliance off
During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: It is not sufficient to set the temperature adjustment knobs on (appliance off) to eliminate all electrical contact.

Defrosting the appliance

! Follow the instructions below. Do not use objects with sharp or pointed edges to defrost the appliance as these may damage the refrigeration circuit beyond repair.

Cleaning the appliance

The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach or ammonia. The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.
The refrigerator has an automatic defrosting function: water is ducted to the back of the appliance by a special discharge outlet (see diagram) where the heat produced by the compressor causes it to evaporate. It is necessary to clean the discharge hole regularly so that the water can flow out easily.
Avoiding mould and unpleasant odours
The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly. If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open. Replacing the light bulb To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover (10W or 15W).

Precautions and tips

! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. This appliance complies with the following Community Directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments; - 2002/96/CE.

Disposal

Observe local environmental standards when disposing packaging material for recycling purposes. The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out wheeled bin symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

General safety

The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use. The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual. The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms. Do not touch the appliance with bare feet or with wet or moist hands and feet. Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns. When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable. Before cleaning and maintenance, always switch off the appliance and disconnect it from the electrical supply. It is not sufficient to set the temperature adjustment knobs on (appliance off) to eliminate all electrical contact. In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance. Do not use any sharp or pointed utensils or electrical equipment - other than the type recommended by the manufacturer - inside the frozen food storage compartments. Do not put ice cubes taken directly from the freezer into your mouth. Do not allow children to tamper with the controls or play with the appliance. Under no circumstance should they be allowed to sit on the bins or to hang from the door. Keep packaging material out of the reach of children! It can become a choking or suffocation hazard.
Respecting and conserving the environment
Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near heat sources. Try to avoid keeping the door open for long periods or opening the door too frequently in order to conserve energy. Do not fill the appliance with too much food: cold air must circulate freely for food to be preserved properly. If circulation is impeded, the compressor will work continuously. Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy. Defrost the appliance if ice forms (see Maintenance). A thick layer of ice makes cold transference to food products more difficult and results in increased energy consumption. Regularly check the door seals and wipe clean to ensure they are free of debris and to prevent cold air from escaping (see Maintenance).

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Malfunctions:

The internal light does not illuminate. The refrigerator do not cool well.
Possible causes / Solutions:
The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house. The door do not close properly or the seals are damaged. The door are opened too frequently. The TEMPERATURE ADJUSTMENT knob is not in the correct position The refrigerator or the freezer have been over-filled.
The food inside the refrigerator is beginning to freeze. The motor runs continuously. The appliance makes a lot of noise.
The TEMPERATURE ADJUSTMENT knob is not in the correct position. The food is in contact with the back inside wall of the refrigerator. The door is not closed properly or is continuously opened. The outside ambient temperature is very high. The appliance has not been installed on a level surface (see Installation). The appliance has been installed between cabinets that vibrate and make noise. The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.
The back wall of the refrigerator unit This shows the appliance is operating normally. is covered in frost or droplets of water. There is water at the bottom of the refrigerator. The water discharge hole is blocked (see Maintenance).

Assistance

Before calling for Assistance: Check if the malfunction can be solved on your own (see Troubleshooting). If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre Communicating: type of malfunction appliance model (Mod.) serial number (S/N) This information can be found on the data plate located on the bottom left side of the refrigerator compartment.

serial number

Never call on unauthorized technicians and always refuse spare parts which are not originals.

Gebrauchsanleitungen

KHLSCHRANK Inhaltsverzeichnis

Installation, 18

Aufstellort und elektrischer Anschluss
Beschreibung Ihres Gertes, 19

Gerteansicht

Inbetriebsetzung und Gebrauch, 20
Einschalten Ihres Gertes Temperatureinstellung Optimaler Gebrauch des Khlschranks

Wartung und Pflege, 21