FREEZSTOP

Self-Regulating Heating Tape
Electrical heating tape for process heating or temperature maintenance of pipework and vessels in safe or hazardous areas
Automatically adjusts heat output in response to increasing or decreasing pipe temperature Can be cut to length with no wastage Will not overheat or burnout, even when overlapped
High power outputs up to 55W/m Full range of controls and accessories Available for 220/240VAC (110/120VAC on demand) Approvals to CENELEC standards for hazardous and corrosive environments

FEATURES

FREEZSTOP SUPER is an industrial grade, self-regulating heating tape to BS6351 Grade 22 that can be used for applications ranging from process heating or maintenance of temperatures up to 120C. It can be cut to length on site and exact piping lengths can be matched without any complicated design considerations. FREEZSTOP SUPER is suitable for use in safe (non-hazardous) or hazardous and corrosive environments in accordance with CENELEC EN50014/50019. Its self-regulating characteristics improve safety and reliability. FREEZSTOP SUPER will not overheat or burnout, even when overlapped upon itself. The installation of FREEZSTOP SUPER heating tape is quick and simple and requires no special skills or tools. Termination, splicing and power connection components are all provided in convenient kits. Fluoropolymer jacket Semi-conductive self-limiting matrix 1.25mm2 Copper Buswires

OPTIONS

FSS.x Tinned copper (C), or nickel (N) braid for non-hazardous areas, hazardous areas or where traced equipment does not provide an effective earth path, eg. plastic pipework. Heaters must have additional protection from mechanical damage in service. Fluoropolymer outerjacket over tinned copper (C), or nickel (N) braid provides additional protection where corrosive chemical solutions or vapours may be present.
Braid tinned copper (-C) nickel copper (-N)

FSS.xF

Optional outerjacket

APPROVED

SPECIFICATION
MAXIMUM TEMPERATURE MAXIMUM PERMISSIBLE de-energised (1000 hrs cumulative) MINIMUM INSTALLATION TEMPERATURE TEMPERATURE CLASSIFICATION POWER SUPPLY MAXIMUM RESISTANCE OF PROTECTIVE BRAIDING WEIGHTS & DIMENSIONS
Type Ref FSS FSS.x FSS.xF Nom. Dims. (mm) 8.6 x 3.1 9.5 x 3.9 10.7 x 5.1 Weight kg/100m 3.2 6.1 7.9 Min. Bending Gland radius @ 20C Size 20 mm 25 mm 30 mm M20 M20 M20 55FSS 120C (248F) 200C (374F) 30C (22F) CENELEC 20C (4F) Braided - T2 (300C) Braid and Outerjacket - T3 (200C) 220 - 277 VAC (110 - 120 VAC on demand) 18.2 Ohm/km 40FSS 30FSS
MAXIMUM LENGTH (m) vs. CIRCUIT BREAKER SIZE
Cat Reference 15FSS Start-up 230V Temperature 6A 10C 68 0C 20C 40C 10C 0C 20C 40C 10C 0C 20C 40C 10C 0C 20C 40C 16 10A 16A 20A 25A 64
x denotes C for tinned, or N for nickel copper braid

APPROVAL DETAILS

Testing Authority CENELEC ATEX IEC FM CSA Certificate No. Standard
For use with Type C circuit breakers to BS EN60898:1991

THERMAL RATINGS

Nominal output at 230V when FSS is installed on insulated metal pipes.
SCS Ex 99E3175* EN50014 & EN50019 Sira 02ATEX3072 Sira 02Y214197-1295278 EN50014, EN50019 & IEC62086 CEI IEC62086 & IEC60079-7 ANSI/IEEE Std 515
C22.2 No. 130.1 C22.2 No. 130.2 C22.2 No. 138 EN50014, EN50019, BS6351, IEEE Std 515

Lloyds Register

02/00062
Further approvals, and approvals for braid only FSS are available on request. * Suffix X for braid only heaters

ORDERING INFORMATION

Example Output 55W/m at 10C Freezstop Super Supply Voltage 220 - 240V AC Tinned Copper Braid Fluoropolymer outer jacket

55FSS2-CF

ACCESSORIES
Heat Trace supply a complete range of accessories including termination/splice kits, end seals, junction boxes and controls. Such items carry separate approvals from the heating tapes. When used in hazardous areas, only use approved components.

Pipe Temperature ( C)

FURTHER INFORMATION
Please consult the appropriate termination instructions and the Heat Trace Installation, Maintenance and Testing Manual (IMEHT010) for further details.
The information given herein, including drawings, illustrations and schematics (which are intended for illustration purposes only), is believed to be reliable. However, Heat Trace Ltd makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. Users of Heat Trace Ltd products should make their own evaluation to determine the suitability of each such product for specific applications. In no way will Heat Trace Ltd be liable for any damages arising out of the misuse, resale or use of the product.

HPDS290 05/03

Tracer House, Cromwell Road, Bredbury, Stockport, Cheshire, SK6 2RF, UK Tel: +44(0)161-Fax: +44(0)161-http://www.heat-trace.com

Withstands 240C1

Electrical heating tape for process heating or temperature maintenance of pipework and vessels where very high temperature withstand is required

ULTIMO

Automatically adjusts heat output in response to increasing or decreasing pipe temperature Can be cut to length with no wastage Will not overheat or burnout
High power outputs up to 90W/m Full range of controls and accessories Available for 220/240VAC (110/120VAC on demand)
FREEZSTOP ULTIMO is an industrial grade, self-regulating heating tape that can be used for applications ranging from process heating or maintenance of temperatures up to 190C. It can be cut to length on site and exact piping lengths can be matched without any complicated design considerations. FREEZSTOP ULTIMO is used where high temperatures are required (up to 190C) or where the heater must be capable of withstanding high exposure temperatures (up to 240C un-energised). Its self-regulating characteristics improve safety and reliability. FREEZSTOP ULTIMO will not overheat or burnout. The installation of FREEZSTOP ULTIMO heating tape is quick and simple and requires no special skills or tools. Termination, splicing and power connection components are all provided in convenient kits. Fluoropolymer jacket
Nickel Plated Copper Buswires FSU -1.25mm2.FSUw -1.9mm2
Semi-conductive self-limiting matrix
FSU Unbraided base heater protected against corrosive chemical solutions and vapours. Heaters must have additional protection from mechanical damage in service. Nickel plated braid for where traced equipment does not provide an effective earth path, eg. plastic pipework. Heaters must have additional protection from mechanical damage in service. Fluoropolymer outerjacket over nickel plated braid provides additional protection where corrosive chemical solutions or vapours may be present.

Nickel copper braid

FSU.NF
MAXIMUM CONTINUOUS TEMPERATURE (energised) MAXIMUM PERMISSIBLE EXPOSURE TEMPERATURE de-energised (1000 hrs cumulative) MINIMUM INSTALLATION TEMPERATURE POWER SUPPLY

190C (392F)

Cat Ref 15FSU Start-up Temp 10C 0C 20C 6A 230V 10A 16A 20A 25A 46 32A 58

240C (509F)

40C (50.8F)

10C 0C 20C

220 - 240 VAC (110 - 120 VAC on demand)
MAXIMUM RESISTANCE OF PROTECTIVE BRAIDING WEIGHTS & DIMENSIONS
Type Ref FSU FSU.N FSU.NF FSUw FSUw.N FSUw.NF Nom. Dims. (mm) 10.4 x 3.4 11.4 x 4.4 12.2 x 5.2 12.4 x 3.4 13.4 x 4.4 14.2 x 5.2

18.2 Ohm/km 60FSU

Weight Min. Bending kg/100m radius @ 20C 7.6 11.7 15.4 9.5 13.7 17.mm 25 mm 30 mm 20 mm 25 mm 30 mm
Gland Size M20 M20 M20 M20 M20 M20
75FSUw 10C 0C 20C 90FSUw 10C 0C 20C
N denotes nickel plated copper braid
Nominal output at 230V when FSU is installed on insulated metal pipes.
Testing Authorities CENELEC Standard Area Approval ATEX IEC

Zone 1 and Zone 2

Example Output 45W/m at 10C FREEZSTOP ULTIMO Supply Voltage 220 - 240V AC Nickel Plated Copper Braid Fluoropolymer Outer Jacket 45 FSU 2-NF
90FSUW 60 75FSUW 50 60FSU 40 45FSU 30 30FSU 20 15FSU 210 Pipe Temperature (oC)
Heat Trace supply a complete range of accessories including termination/splice kits, end seals, junction boxes and controls. Such items carry separate approvals from the heating tapes.

HPDS410 10/03

Electrical heating tape for process heating or temperature maintenance of pipework and vessels in safe or hazardous areas

FREEZSTOP

Self-Regulating Heating Tape
Automatically adjusts heat output in response to increasing or decreasing pipe temperature Can be cut to length with no wastage Will not overheat or burnout, even when overlapped High power outputs up to 55W/m
Full range of controls and accessories Available for 220/240VAC (110/120VAC on demand) Approvals to CENELEC standards for hazardous and corrosive environments
FEATURES Freezstop Super is an industrial grade, self-regulating heating tape to BS6351 Grade 22 that can be used for applications ranging from process heating or maintenance of t emperatures up to 150C. It can be cut to length on site and exact piping lengths can be matched without any complicated design considerations. Freezstop Super is suitable for use in safe (non-hazardous) or hazardous and corrosive environments in accordance with CENELEC EN50014/50019. Its self-regulating characteristics improve safety and r eliability. Freezstop Super will not overheat or burnout, even when overlapped upon itself. The installation of Freezstop Super heating tape is quick and simple and requires no special skills or tools. Termination, splicing and power connection components are all provided in convenient kits. OPTIONS FSS.x Tinned copper (C), or nickel (N) braid for non-hazardous areas, hazardous areas or where traced equipment does not provide an effective earth path, eg. plastic pipework. Heaters must have additional protection from mechanical damage in service. Fluoropolymer outerjacket over tinned copper (C), or nickel (N) braid provides additional protection where corrosive chemical solutions or vapours may be p resent. Fluoropolymer jacket Semi-conductive self-limiting matrix 1.1mm Copper Buswires
Braid tinned copper (-C) nickel copper (-N)

FSS.xF

Optional outerjacket

SPECIFICATION

MAXIMUM TEMPERATURE MAXIMUM PERMISSIBLE de-energised MINIMUM INSTALLATION TEMPERATURE TEMPERATURE CLASSIFICATION POWER SUPPLY
150C (302F) 200C (392F) 30C (22F) CENELEC 20C (4F)
MAXIMUM LENGTH (m) vs. CIRCUIT BREAKER SIZE
Cat Start-up 230V Reference Temperature 6A 15FSS 10C 68 0C 20C 40C 16 10A 16A 20A - - 25A 64
Braided - T2 (300C) Braid and Outerjacket - T3 (200C) 220 - 277 VAC (110 - 120 VAC on demand) 18.2 Ohm/km

30FSS 10C 0C 20C 40C

MAXIMUM RESISTANCE OF PROTECTIVE BRAIDING WEIGHTS & DIMENSIONS
Type Ref FSS FSS.x FSS.xF Nom. Dims. (mm) 10.4 x 3.4 11.4 x 4.4 12.2 x 5.2

40FSS 10C 0C 20C 40C

Weight Min. Bending Gland kg/100m radius @ 20C Size 7.6 11.7 15.mm 25 mm 30 mm M20 M20 M20

55FSS 10C 0C 20C 40C

x denotes C for tinned, or N for nickel copper braid

APPROVAL DETAILS

Testing Authority Certificate No. CENELEC Standard
For use with Type C circuit breakers to BS EN60898:1991

THERMAL RATINGS

Nominal output at 230V when FSS is installed on insulated metal pipes.
SCS Ex 99E3175* EN60079-0/EN60079-7
ATEX Sira 02ATEX3072 EN60079-0/EN60079-7 & IEC62086 IEC Sira 02Y3062 FM 3009080 CEI IEC62086 & IEC60079-7 ANSI/IEEE Std 515
CSA 214197-1295278 C22.2 No. 130.1 C22.2 No. 130.2 C22.2 No. 138 Lloyds 02/00062 Register EN60079-0/EN60079-7 IEEE Std 515
Further approvals, and approvals for braid only FSS are available on request. * Suffix X for braid only heaters

ORDERING INFORMATION

Example Output 55W/m at 10C Freezstop Super Supply Voltage 220 - 240V AC Tinned Copper Braid Fluoropolymer outer jacket 55FSS2-CF

ACCESSORIES

Heat Trace supply a complete range of accessories including t ermination/splice kits, end seals, junction boxes and controls. Such items carry separate approvals from the heating tapes. When used in hazardous areas, only use approved components.

Pipe Temperature ( C)

FURTHER INFORMATION
Please consult the appropriate termination instructions and the Heat Trace Installation, Maintenance and Testing Manual (IMEHT010) for further details.
The information given herein, including drawings, illustrations and schematics (which are intended for illustration purposes only), is believed to be reliable. However, Heat Trace Ltd makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. Users of Heat Trace Ltd products should make their own evaluation to determine the suitability of each such product for specific applications. In no way will Heat Trace Ltd be liable for any damages arising out of the misuse, resale or use of the product.

HPDS290 10/07

Meres Edge, Chester Road, Helsby, Frodsham, Cheshire, WA6 0DJ, UK Tel: +44 (0)451 Fax: +44 (0)846 http://www.heat-trace.com