1.3 Type label

Application

SC10DL

220-240V~50Hz MBP/HBP HST

SC12MLX

115V~60Hz MBP HST

R404A R407CR507

Lilac stripe

R404A R507

8315-10
Lilac stripe Approvals Barcode on white background Yellow background

8306-2

DANFOSS COMPRESSORS
Barcode on white background Green background
The country of origin indicated on the compressor paper label and on the compressor cover varies depending on the manufacturing place. Information can be found on our technical information sheet Country of Origin. 1.4 Data stamping The compressor type and production date are stamped on the side of the compressor. The information may be as follows, L-4CL-2071 F-202E2207 The first line states the model designation and the code no. L= last letter (or last two letters) of the compressor type 4CL = nominal displacement and application 2071 = 4 last digits in the code no. (= position mark) The second line states the date of manufacture and internal Danfoss codes. F = manufacturing place (F = Germany, AL = Slovenia, AM = Mexico) 20 = week = 2002 E = Friday (A = Monday etc.) 220 = nominal voltage 7 = internal Danfoss code 1.5 Compressor dimensions The build-in conditions (total height, weight, tube dimensions etc.) are specified in the individual datasheets including dimensioned sketches for the compressors.

2. Application range CL

Compressors with denominations ending with CL are primarily designed for low evaporating temperatures (LBP Low Back Pressure) for use in commercial refrigerators, freezers and similar applications in regions with normal supply voltage. Compressors with denominations ending with ML are primarily designed for medium evaporation temperatures (MBP Medium Back Pressure) for use in commercial refrigerators, bottle coolers, ice machines and similar applications. Compressors with denominations ending with DL are primarily designed for high evaporation temperatures (HBP High Back Pressure) for use in commercial refrigerators, liquid coolers, dehumidifiers, refrigerated display counters, vending machines, heat pumps, and similar applications. The following table shows the normally recommended applications as regards voltage/ frequency, ambient temperature, evaporating temperature and necessary compressor cooling. The recommendations must be regarded as a guideline only as they presuppose a proper dimensioning of the refrigeration system.

3. Electrical equipment

The compressors are equipped with a single-phase AC motor. All compressors for R404A/ R507 and R407C are designed only for use with High Starting Torque (HST). The electrical equipments are classified as normal tight (IP20). The motor protector is built into the motor (winding protector). Exception are compressors with the denominations TF and NF and some SCs. Earth connections are located on the bracket around the current lead-in of the compressor. No attempt must be made to start the compressor without a complete starting device. The compressors can be supplied with the following motor systems:

3.1 HST (CSIR)

TL, NL, FR

TF, NF

Compressors with the motor type Capacitor Start Induction Run (CSIR) have a starting device for High Starting Torque (HST). This starting device consists of a starting relay and a starting capacitor and is used for compressors with the denominations TL, TF, NL, NF, FR and SC. The following designs of starting devices exist: a) Relay + starting capacitor + cord relief + cover, used for compressors with the denominations TL, NL, FR and SC. b) Relay housing including motor protector + starting capacitor + cord relief (2x) + cover, used for compressors with the denomination TF and NF. c) Relay + starting capacitor (with bracket) + cover/protector/protector holder (parts of compressor), used for compressors with the denomination SC which have an external protector. The starting device requires no pressure-equalization before each start and is normally used in refrigerating systems with expansion valve as throttling device or in capillary tube systems where pressure equalizing is not obtained during the standstill periods. The starting capacitor is designed for short time cut-in. 1.7% ED, which is stamped on the starting capacitor, means for instance max. 10 cutins per hour each with a duration of 6 seconds (normally shorter than 1 sec.).

8077-2

SC (external protector)

3.5 HST (CSR)

Compressors with the motor type Capacitor Start Run (CSR) have a starting device for High Starting Torque (HST). The following designs of starting devices exist: a) Relay + starting capacitor + run capacitor + terminal board + cord relief + cover, used for compressors with the denomination SC. b) Relay + starting capacitor (with bracket) run capacitor + cover/protector/protector holder (parts of compressor), used for compressors with the denomination SC which have an external protector. The starting device is mandatory for some of the biggest SC compressors. The starting capacitor is designed for short time cut-in. 1.7% ED, which is stamped on the starting capacitor, means for instance max. 10 cut-ins per hour each with a duration of 6 seconds. For further information on which starting device to use on individual compressors, please refer to the actual datasheets (some compressors have limitations for either LST or HST).

3.6 Connections

The electrical equipments are equipped with connectors depending on the ordered code number, Starting relays: 6.3 mm spade connectors only The power supply must be connected as shown in the wiring diagrams for the chosen electrical equipment given in the actual datasheets.

3.7 Approvals

SC12MLX 115V-60Hz 1PH

THERMALLY PROTECTED

Approval mark
The compressors have been approved in respect of safety by testing authorities in the majority of Western European countries. Actual standards to which the compressors have been approved are specified in the individual datasheets. Approval markings appear on the compressor labels. Most compressors which are capable of running at 60Hz have been approved in respect of safety by testing authorities UL and CSA. Actual standards to which the compressors have been approved are specified in the individual datasheets. Approval markings appear on a separate approval mark label.

8459-4

8467-2
4. Moisture and Impurities
The compressors are dried to a maximum moisture content of 60 to 75 mg depending on the compressor size. The maximum impurity content is 40 to 50 mg depending on the compressor size.
5. Max. refrigerant charge
The refrigerant charge must never be too large to be contained on the condenser side of the refrigeration system. Only the refrigerant amount which is necessary for the system to function must be charged. The refrigerant amount may be critical as regards oil foaming and liquid hammer after long standstill periods. Because of this, limitations of refrigerant charges have been introduced. The maximum refrigerant charge is specified in the individual datasheets. If these limitations cannot be complied with, the risk may be reduced if a crankcase heater is properly used or if a pump down system is established.

6. Oil charge

The compressors are supplied charged with dried and degassed oil, which is normally sufficient for the lifetime of the compressor. The refrigeration systems and the system components must be dimensioned in such a way that the oil can be lead back continuously to the compressor housing without accumulating in the system, e.g. without oil pockets and with sufficient gas velocity. The compressors use polyolester oils and are approved only for these oils and R404A/R507 respectively R407C. The oil charge is specified in the individual datasheets.

C or D

6.2 0.09

5.0 +0.12/+0.20 125

157 60.5 66

96 117

CF.52.A2.02

105 107

Barcode on white background

31.5 28

Capacity (EN 12900/CECOMAF)
Comp.\C TL4CL ------23.---10 286

-5 352

Capacity (ASHRAE)
Comp.\C TL4CL ------23.---10 334

-5 411

Power consumption
Comp.\C TL4CL ------23.---10 198

-5 215

Current consumption
Comp.\C TL4CL -45 0.89 -40 0.79 -35 0.80 -30 0.88 -25 1.01 -23.3 1.05 -20 1.14 -15 1.25 -10 1.28

-5 1.31

COP (EN 12900/CECOMAF)
Comp.\C TL4CL -45 0.64 -40 0.72 -35 0.81 -30 0.90 -25 1.02 -23.3 1.06 -20 1.14 -15 1.28 -10 1.45

-5 1.64

COP (ASHRAE)
Comp.\C TL4CL -45 0.74 -40 0.83 -35 0.94 -30 1.05 -25 1.18 -23.3 1.23 -20 1.33 -15 1.50 -10 1.69

-5 1.92

Main winding Winding protector Start winding
Test conditions Condensing temperature Ambient and suction gas temp. Liquid temperature Fan cooling F2, 220V 50Hz
EN 12900/CECOMAF 45C 32C 45C

ASHRAE 45C 32C 32C

Accessories
Devices Starting relay Cover Starting capacitor 60 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d TL4CL 117U6000 103N2010 117U5014 103N1010 118-1917 118-1918 118-1919
TL4DL MBP/HBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.52.B1.02) General
Compressor Code number TL4DL 102U2038
Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz MBP/HBP -20 to - 254 /50 CSIR 38 F2 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 3.7.5
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 175 7.5 7.5 12.0/20.0 EN 60335-2-34

CF.52.B2.02

Comp.\C TL4DL ----7.2 572

10 631

Comp.\C TL4DL ----7.2 672

10 742

Comp.\C TL4DL ----7.2 263

10 272

Comp.\C TL4DL -20 1.22 -15 1.28 -10 1.34 -5 1.1.1.54 7.2 1.56

10 1.60

Comp.\C TL4DL -20 1.16 -15 1.23 -10 1.38 -5 1.1.2.06 7.2 2.17

10 2.32

Comp.\C TL4DL -20 1.36 -15 1.44 -10 1.61 -5 1.2.2.42 7.2 2.55

10 2.73

Devices Starting relay Cover Starting capacitor 60 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d TL4DL 117U6001 103N2010 117U5014 103N1010 118-1917 118-1918 118-1919

NL7CLX LBP/MBP Compressor R404A/R507 220-240V 50Hz

Data Sheet General

Compressor Code number NL7CLX 105F3710

NL7CLX

Blue stripe Approvals
Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C 43C C V/Hz LBP/MBP -45 to -- 254 /50 CSIR 43 F1 F1 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm

7.10.4

204 170
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST watt A A 235 10.4 10.4 8.2/14.7 EN 60335-2-34

100 70

Resistance, main and start winding (25C) Approvals

Height

8.2 0.09 6.2 0.09 6.2 0.09 80

A B 93.5

Suction connector Process connector Discharge connector Compressors on a pallet
location/I.D. mm location/I.D. mm location/I.D. mm pcs.

119 127

CF.53.I1.02
Comp.\C NL7CLX -45 -40 -35 -30 --23.-20 -15 -10
Comp.\C NL7CLX -45 -40 -35 -30 -25 1.64 -23.3 1.68 -20 -15 -10 -5
Comp.\C NL7CLX -45 -40 -35 -30 -25 1.18 -23.3 1.24 -20 -15 -10
Comp.\C NL7CLX -45 -40 -35 -30 -25 1.37 -23.3 1.44 -20 -15 -10
Test conditions Condensing temperature Ambient and suction gas temp. Liquid temperature Fan cooling F2, 220V 50Hz, preliminary data
Devices Starting relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d NL7CLX 117U6002 103N2010 117U5015 103N1010 118-1917 118-1918 118-1919
FR6CL LBP/MBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.53.A1.02) General
Compressor Code number FR6CL 103U2670
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 6.10.5

178 19

Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 215

101.60.5

8.2 8.2 8.9/12.0 EN 60335-2-34
Height mm A B Suction connector Process connector Discharge connector Compressors on a pallet location/I.D. mm location/I.D. mm location/I.D. mm pcs. C D E 8.2 0.09 6.2 0.09 6.2 0.09 80

124.5 127.5

CF.53.A2.02
Comp.\C FR6CL ------23.---10 473

-5 578

-5 1.77

Comp.\C SC12CL -45 0.35 -40 0.64 -35 0.87 -30 1.08 -25 1.28 -23.3 1.34 -20 1.47 -15 1.67 -10 1.87

-5 2.06

Devices Starting relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d SC12CL 117U6005 103N2009 117U5017 103N1004 118-1917 118-1918 118-1919
SC12DL MBP/HBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.L2.02) General
Compressor Code number SC12DL 104L2625

SC12DL

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 12.13.6
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 495
18.6 3.7/14.1 EN 60335-2-34
Height mm A B B1 B2 Suction connector Process connector Discharge connector Compressors on a pallet location/I.D. mm location/I.D. mm location/I.D. mm pcs. C D E 10.2 0.09 6.2 0.09 6.2 0.09 80

CF.54.L3.02

8306-3
Comp.\C SC12DL ----7.10 2258

15 2674

Comp.\C SC12DL ----7.10 2647

15 3144

Comp.\C SC12DL ----7.10 778

15 800

Comp.\C SC12DL -20 3.37 -15 3.65 -10 3.89 -5 4.4.4.44 7.2 4.4.56

15 4.66

Comp.\C SC12DL -20 1.24 -15 1.43 -10 1.65 -5 1.2.2.52 7.2 2.2.90

15 3.34

Comp.\C SC12DL -20 1.45 -15 1.67 -10 1.92 -5 2.2.2.95 7.2 3.3.40

15 3.93

Devices Starting relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d SC12DL 117U6019 103N2009 117U5017 103N1004 118-1917 118-1918 118-1919
SC15CL LBP/MBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.C1.02) General
Compressor Code number SC15CL 104L2853

SC15CL

Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz LBP/MBP -40 to -- 254 /50 CSIR 38 F2 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 15.13.8

CF.54.C2.02

8296-5
Comp.\C SC15CL -----23.---10 1208

-5 1458

Comp.\C SC15CL -----23.---10 1407

-5 1699

Comp.\C SC15CL -----23.---10 790

-5 891

Comp.\C SC15CL -40 2.83 -35 3.05 -30 3.28 -25 3.52 -23.3 3.61 -20 3.77 -15 4.04 -10 4.31

-5 4.60

Comp.\C SC15CL -40 0.51 -35 0.75 -30 0.93 -25 1.10 -23.3 1.15 -20 1.25 -15 1.40 -10 1.53
Comp.\C SC15CL -40 0.59 -35 0.87 -30 1.08 -25 1.27 -23.3 1.34 -20 1.46 -15 1.63 -10 1.78

-5 1.91

Devices Starting relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d SC15CL 117U6019 103N2009 117U5017 103N1004 118-1917 118-1918 118-1919
SC15DL MBP/HBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.M2.02) General
Compressor Code number SC15DL 104L2856

SC15DL

Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz MBP/HBP -20 to - 254 /50 CSR 38 F2 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 15.13.5
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 550
21.8 3.5/12.2 EN 60335-2-34

CF.54.M3.02

8306-5
Comp.\C SC15DL ----7.10 2652

15 3156

Comp.\C SC15DL ----7.10 3109

15 3710

Comp.\C SC15DL ----7.10 896

15 918

Comp.\C SC15DL -20 3.09 -15 3.46 -10 3.79 -5 4.4.4.50 7.2 4.4.64

15 4.75

Start winding

Bleeder resistance

Comp.\C SC15DL -20 1.29 -15 1.46 -10 1.67 -5 1.2.2.56 7.2 2.2.96

15 3.44

Main winding Winding protector

N L N L

Comp.\C SC15DL -20 1.50 -15 1.70 -10 1.95 -5 2.2.2.99 7.2 3.3.47

15 4.04

Thermostat
Devices Starting device a3 Cover Starting relay Starting capacitor Run capacitor Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities b a2 c e d Fig. SC15DL 117-7028 (470 mm cable length) 117-7029 (550 mm cable length) 117-7032 (650 mm cable length) 103N2009 Components of starting device 103N1004 118-1917 118-1918 118-1919
SC18CL LBP/MBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.D1.02) General
Compressor Code number SC18CL 104L2123

SC18CL

Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz LBP/MBP -45 to -- 254 /50 CSR 38 F2 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 17.13.7
20.0 3.7/14.1 EN 60335-2-34

CF.54.D2.02

8296-3
Comp.\C SC18CL ------23.---10 1425

-5 1735

Comp.\C SC18CL ------23.---10 1659

-5 2022

Comp.\C SC18CL ------23.---10 894

-5 1008

Comp.\C SC18CL -45 2.61 -40 2.80 -35 3.02 -30 3.29 -25 3.60 -23.3 3.72 -20 3.96 -15 4.36 -10 4.80

-5 5.29

Main winding
Comp.\C SC18CL -45 0.57 -40 0.72 -35 0.87 -30 1.01 -25 1.16 -23.3 1.21 -20 1.31 -15 1.46 -10 1.59

SC10/10CL LBP/MBP Twin Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.F1.02) General
Compressor Code number SC10/10CL 104L4087

SC10/10CL

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 2 x 10.29 1220
Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* Resistance, main and start winding (25C) Approvals watt A A 2 x 315 12.6 12.6 6.7/11.8 EN 60335-2-34 * Operational current for the second compressor time-delayed.

175 302

Height mm A B B1 B2 Suction connector Service valve Solder connector Process connector Discharge connector Compressors on a pallet location/I.D. mm location/I.D. mm location/I.D. mm location/I.D. mm pcs. C C D E 6.2 0.100

1"-14 UNF

CF.54.F2.02
Comp.\C SC10/10CL ----23.---10 1601

-5 1981

Starting relay Starting capacitor
Comp.\C SC10/10CL ----23.---10 1863

-5 2309

Start winding Winding protector
Comp.\C SC10/10CL ----23.---10 1060

-5 1168

Blue Black Brown Time delay relay Thermostat 2
Comp.\C SC10/10CL -35 3.82 -30 4.11 -25 4.43 -23.3 4.55 -20 4.79 -15 5.18 -10 5.61

-5 6.08

Safety pressure control Remove wire L-1 if time delay is used Remove wire 1-2 if thermostat 2 is used
Comp.\C SC10/10CL -35 0.69 -30 0.88 -25 1.04 -23.3 1.09 -20 1.19 -15 1.35 -10 1.51

seal ring service valve

Comp.\C SC10/10CL -35 0.80 -30 1.02 -25 1.21 -23.3 1.27 -20 1.39 -15 1.57 -10 1.76

seal ring

solder connector
Devices Starting relay Starting capacitor 80 F Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. SC10/10CL 117U6003 117U5017 103N2009 103N1004 117N0001 020-1014 118-7350 (12 mm) 104B0584 (12 mm) 118-3638
Solder connector (alternative) Seal ring for service valve and solder connector Mounting accessories Bolt joint for one compressor Bolt joint in quantities

118-1917 118-1918

SC10/10DL MBP/HBP Twin Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.N2.02) General
Compressor Code number SC10/10DL 104L4091

SC10/10DL

Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* Resistance, main and start winding (25C) Approvals watt A A 2 x 385 14.8 14.8 5.0/13.7 EN 60335-2-34 * Operational current for the second compressor time-delayed.

CF.54.N3.02

Comp.\C SC10/10DL ----7.10 3494

15 4169

Comp.\C -20 SC10/10DL 1095 --10 -3392 7.10 4095

15 4901

Comp.\C SC10/10DL ----7.10 1228

15 1262

Comp.\C -20 SC10/10DL 5.11 -15 5.55 -10 5.95 -5 6.6.6.85 7.2 6.7.06

CF.54.O3.02

8307-3
Comp.\C -20 SC12/12DL 1217 -15 -2055 -7.10 4516

15 5348

Comp.\C -20 SC12/12DL 1414 -15 -2393 -7.4791 5294

15 6287

Comp.\C SC12/12DL ----7.10 1555

15 1600

Comp.\C -20 SC12/12DL 6.74 -15 7.29 -10 7.78 -5 8.8.8.88 7.2 9.9.13

15 9.31

Comp.\C -20 SC12/12DL 1.24 -15 1.43 -10 1.65 -5 1.2.2.52 7.2 2.2.90
Comp.\C -20 SC12/12DL 1.45 -15 1.67 -10 1.92 -5 2.2.2.95 7.2 3.14

10 3.3.93

Devices Starting relay Starting capacitor 80 F Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. SC12/12DL 117U6019 117U5017 103N2009 103N1004 117N0001 020-1014 118-7350 (12 mm) 104B0584 (12 mm) 118-3638
SC15/15CL LBP/MBP Twin Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.H1.02) General
Compressor Code number SC15/15CL 104L4089

SC15/15CL

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 2 x 15.28 1220
Height mm A B B1 B2 Suction connector Service valve Solder connector Process connector Discharge connector Compressors on a pallet location/I.D. mm location/I.D. mm location/I.D. mm location/I.D. mm pcs. C C D E 6.2 0.110

CF.54.H2.02

8297-5
Comp.\C SC15/15CL ----25 -23.1347 --15 -2417

-5 2916

Comp.\C SC15/15CL ----25 -23.1563 -20 -2298 -10 2813

-5 3398

Comp.\C SC15/15CL ----25 -23.1169 --15 -1580

-5 1782

Comp.\C -40 SC15/15CL 5.66 -35 6.10 -30 6.56 -25 7.04 -23.3 7.21 -20 7.55 -15 8.08 -10 8.62

-5 9.19

Comp.\C -40 SC15/15CL 0.51 -35 0.75 -30 0.93 -25 1.10 -23.3 1.15 -20 1.25 -15 1.40 -10 1.53
Comp.\C -40 SC15/15CL 0.59 -35 0.87 -30 1.08 -25 1.27 -23.3 1.34 -20 1.46 -15 1.63

-10 1.78 -5 1.91

Devices Starting relay Starting capacitor 80 F Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. SC15/15CL 117U6019 117U5017 103N2009 103N1004 117N0001 020-1014 118-7350 (12 mm) 104B0584 (12 mm) 118-3638
SC15/15DL MBP/HBP Twin Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.P2.02) General
Compressor Code number SC15/15DL 104L4093

SC15/15DL

Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* Resistance, main and start winding (25C) Approvals watt A A 2 x 550 21.8 21.8 3.5/12.1 EN 60335-2-34 * Operational current for the second compressor time-delayed.

CF.54.P3.02

8307-2

Comp.\C -20 SC15/15DL 1518 -15 -2414 -7.10 5304

15 6311

Winding protector Starting capacitor Main winding Starting relay Run capacitor Start winding Bleeder resistance
Comp.\C -20 -15 SC15/15DL --7.10 6218

15 7419

Comp.\C -20 SC15/15DL 1178 ---7.10 1793

15 1837

Blue Black Brown Time delay relay Safety pressure control
Comp.\C -20 SC15/15DL 6.19 -15 6.93 -10 7.58 -5 8.8.9.00 7.2 9.9.29

15 9.50

Thermostat 2
Remove wire L-1 if time delay is used
Remove wire 1-2 if thermostat 2 is used
Comp.\C -20 SC15/15DL 1.29 -15 1.46 -10 1.67 -5 1.2.2.55 7.2 2.2.96

15 3.43

Comp.\C -20 SC15/15DL 1.50 -15 1.70 -10 1.94 -5 2.2.2.99 7.2 3.19

10 3.4.04

Devices Starting device 2 pcs. SC15/15DL 117-7028 (470 mm cable length) 117-7029 (550 mm cable length) 117-7032 (650 mm cable length) 103N2009 103N1004 117N0001 020-1014 118-7351 (16 mm) 118-7405 (16 mm) 118-3638
Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve
SC18/18CL LBP/MBP Twin Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.I1.02) General
Compressor Code number SC18/18CL 104L4090

SC18/18CL

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 2 x 17.69 1220
Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* Resistance, main and start winding (25C) Approvals watt A A 2 x 495 20.0 20.0 3.7/14.1 EN 60335-2-34 * Operational current for the second compressor time-delayed.

CF.54.I2.02

8297-2
Comp.\C -45 SC18/18CL 333 -40 541
-35 -30 -25 -23.3 -20 -15 -10 -3469
Comp.\C -45 SC18/18CL 386 -40 627
-35 -30 -25 -23.3 -20 -15 -10 -4043
Comp.\C -45 SC18/18CL 587 -40 752
-35 -30 -25 -23.3 -20 -15 -10 -2015
Comp.\C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -5 SC18/18CL 5.22 5.59 6.04 6.58 7.21 7.44 7.92 8.72 9.61 10.58
Comp.\C -45 -40 -35 SC18/18CL 0.57 0.72 0.87
-30 -25 -23.3 -20 -15 -10 -5 1.01 1.16 1.21 1.31 1.46 1.59 1.72
Comp.\C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -5 SC18/18CL 0.66 0.83 1.00 1.18 1.35 1.41 1.52 1.69 1.85 2.01
Devices Starting device Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. 2 SC18/18CL 117-7012 (470 mm cable length) 117-7027 (550 mm cable length) 103N2009 103N1004 117N0001 020-1014 118-7351 (16 mm) 118-7405 (16 mm) 118-3638

4.69 2.43
Devices Starting Relay Starting Relay (alternative) Cover Starting capacitor 80 F Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 a2 b c SC12MLX 117-7426 117-7422 1117U1021 117U5019 118-1917 118-1918 118-1919
TF4CLX LBP/MBP Compressor R404A/R507 115-127V 60Hz
Data Sheet (Replaces CF.52.E1.22) General
Compressor Connector-material Copper-plated steel Copper-plated steel Copper Sealing Aluminium caps Rubber plugs Rubber plugs 102U2102
Lilac stripe Barcode on white background Green background

TF4CLX Code number

TF4CLX
Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at max. ambient temperature 110F (43C) F1
LBP/MBP F (C) V/Hz -49 to 45 (-45 to 7.2) 95 - 135 /60 CSIR F (C) 110 (43)

TF4CLX 115V-60Hz 1PH

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor housing Weight without electrical equipment cu.in. (cm ) fl.oz. (cm3) oz. (g) fl.oz. (cm3) lbs. (kg)
0.23 (3.86) 9.5 (280) 17.5 (500)

1.14"

57.3 (1690) 17.9 (8.1)
2.34"(59.5) 2.60" (66)

6.18"(157)

Motor size LRA (rated after 4 sec.UL984) HST Cut-in current HST watt A A 225 20.0 20.0 2.6/3.8 UL984/CSA-C22.2

4.13"(105)

4.02"(102)
3.78"(96) 4.61"(117)

2.80"(71)

8.90"(226) 6.93"(176)
Resistance, main and start winding (77F) Approvals
Height in. (mm) A B Suction connector Process connector Discharge connector Compressors on a pallet 6.81 (173) 6.65 (169)
0.75"(19) 0.14"(3.6)

6.50"(165)

location/I.D. in. (mm) C 0.252-0.259 (6.50.09)
4.00"(101.6) 2.76"(70) 5.35"(136)
location/I.D. in. (mm) D 0.252-0.259 (6.50.09) location/I.D. in. (mm) E 0.189-0.193 (4.9+0.10/-0) pcs. 125
6.70"(170) 7.01"(178) 8.03"(204)

CF.52.E2.22

4.13"(105) 4.21"(107)

0.63"(16)

8404-2

Capacity

Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* ASHRAE MBP CECOMAF -49 -44 -40 -71 -30 -20 -34.4 -28.145
ASHRAE in Btu/h - EN 12900/CECOMAF in watt

TFS4.5CLX

R404A SUCTION R507 CONNECTOR
LBP F (C) V/Hz -49 to 20 (-45 to -6.7) 103 - 135 /60 CSIR F (C) 110 (43)

TFS4CLX 115V-60Hz 1PH

0.29 (4.63) 9.5 (280) 14.0 (400)

CF.52.D2.22

8405-2
Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* CECOMAF -49 --40 -407 100
-30 -34.-20 -28.-13 --10 -23.0 -17.10 -12.20 -6.2034 509
Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* CECOMAF -49 --40 --30 -34.-20 -28.-13 --10 -23.0 -17.10 -12.291 292

20 -6.340 342

Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* CECOMAF -49 -45 2.18 2.23 2.21 -40 -40 2.26 2.29 2.28 -30 -34.4 2.40 2.39 2.39 -20 -28.9 2.60 2.55 2.55 -13 -25 2.76 2.70 2.70 -10 -23.3 2.84 2.76 2.-17.8 3.14 3.03 3.-12.2 3.48 3.34 3.35

20 -6.7 3.88 3.70 3.72

Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* CECOMAF
-49 -45 2.10 2.55 0.62 -40 -40 2.56 3.01 0.75 -30 -34.4 3.06 3.56 0.89 -20 -28.9 3.56 4.14 1.03 -13 -25 3.91 4.53 1.13 -10 -23.3 4.06 4.69 1.-17.8 4.53 5.20 1.-12.2 4.97 5.63 1.-6.7 5.36 5.98 1.49
ASHRAE LBP ASHRAE LBP* EN 12900 130F (54.4C) 110F (43.3C) 45C (113F) 90F (32C) 90F (32C) 32C (90F) 90F (32C) 90F (32C) 32C (90F) 90F (32C) 90F (32C) 45C (113F) Fan F1 Fan F1 Fan F1 115/60 115/60 115/60
Design limits: Max. cond. temp. F (C) stable Max. cond. temp. F (C) peak
Devices Starting relay (Klixon incl.) Klixon Starting capacitor 280 F Cover Cord relief Cord relief for capacitor Mounting accessories Bolt joint in quantities Bolt joint in quantities Snap-on in quantities Fig. a2 c b d dc in. (mm) 5 /8 (16) 3 /4 (19) 5 /8 (16) TFS4.5CLX 117U4148 MRP36EN-6 117U5025 117U1021 117U0349 117U0349 118-1945 118-1948 118-1944
NF5.5CLX LBP/MBP Compressor R404A/R507 115V 60Hz
Compressor Connector-material Copper-plated steel Copper-plated steel Copper Sealing Aluminium caps Rubber plugs Rubber plugs NF5.5CLX Code number

Lilac stripe Application

NF5.5CLX

105F1621 105F1622

Application Evaporating temperature range Voltage range F (C) V/Hz LBP/MBP -49 to 45 (-45 to 7.2) LBP: 95 - 135 /60 MBP: 103 - 135 /60 Motor type Max. ambient temperature Comp. cooling at max. ambient temperature 110F (43C) F2 F (C) CSIR 110 (43)

NF5.5CLX 115V-60Hz 1PH

PROTECTED = Static cooling normally sufficient Approval mark = Oil cooling = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) = Fan cooling 3.0 m/s necessary THERMALLY

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm 3 cm3 g cm3 kg 2 x 12.87 1220
Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* Resistance, main and start winding (25C) Approvals watt A A 2 x 495 18.6 18.6 3.7/14.1 EN 60 335-2-34 * Operational current for the second compressor time-delayed.

CF.54.Z2.02

Comp.\C -15 SC12/12DL 1263 --7.10 4062

15 4913

Comp.\C -15 SC12/12DL 1354 --7.10 4364

15 5284

Comp.\C SC12/12DL ---7.10 1350

15 1400

Comp.\C SC12/12DL -15 6.23 -10 6.62 -5 6.7.7.58 7.2 7.7.82

15 8.03

Comp.\C SC12/12DL -15 1.39 -10 1.62 -5 1.2.2.58 7.2 2.3.01
Comp.\C SC12/12DL -15 1.48 -10 1.74 -5 2.2.2.77 7.2 2.3.23
Devices Starting relay Starting capacitor 80 F Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. 1 SC12/12DL 117U6019 117U5017 103N2009 103N1004 117N0001 020-1014 118-7350 (12 mm) 104B0584 (12 mm) 118-3638
SC15/15DL MBP/HBP Twin Compressor R407C 220-240V 50Hz
Data Sheet (Replaces CJ.54.A1.02) General
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm 3 cm3 g cm3 kg 2 x 15.28 1220
Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* Resistance, main and start winding (25C) Approvals watt A A 2 x 550 21.8 21.8 3.5/12.1 EN 60 335-2-34 * Operational current for the second compressor time-delayed.

CJ.54.A2.02

Comp.\C -15 SC15/15DL 1554 --7.10 4966

15 6027

Comp.\C -15 SC15/15DL 1665 --7.10 5336

15 6482

Comp.\C -15 SC15/15DL 1069 --7.10 1521

15 1579

Comp.\C SC15/15DL -15 5.68 -10 6.17 -5 6.6.7.34 7.2 7.7.63

15 7.88

Comp.\C SC15/15DL -15 1.45 -10 1.71 -5 2.2.2.79 7.2 2.3.26
Comp.\C SC15/15DL -15 1.56 -10 1.84 -5 2.2.2.99 7.2 3.3.51
The Danfoss product programme for the refrigeration industry contains:
Compressors for Refrigeration and Air Conditioning A wide range of hermetic reciprocating compressors and scroll compressors as well as aircooled condensing units. The product range is applied in air conditioning units, water chillers and commercial refrigeration systems.
Compressors for Refrigerators and Freezers Hermetic compressors and fan-cooled condensing units for household refrigeration units such as refrigerators and freezers, and for commercial installations such as sales counters and bottle coolers. Compressors for heating pump systems. 12 and 24 V compressors for refrigerators and freezers in commercial vehicles, buses, and boats.