3. Electrical equipment

The compressors are equipped with a single-phase AC motor. All compressors for R404A/ R507 and R407C are designed only for use with High Starting Torque (HST). The electrical equipments are classified as normal tight (IP20). The motor protector is built into the motor (winding protector). Exception are compressors with the denominations TF and NF and some SCs. Earth connections are located on the bracket around the current lead-in of the compressor. No attempt must be made to start the compressor without a complete starting device. The compressors can be supplied with the following motor systems:

3.1 HST (CSIR)

TL, NL, FR

TF, NF

Compressors with the motor type Capacitor Start Induction Run (CSIR) have a starting device for High Starting Torque (HST). This starting device consists of a starting relay and a starting capacitor and is used for compressors with the denominations TL, TF, NL, NF, FR and SC. The following designs of starting devices exist: a) Relay + starting capacitor + cord relief + cover, used for compressors with the denominations TL, NL, FR and SC. b) Relay housing including motor protector + starting capacitor + cord relief (2x) + cover, used for compressors with the denomination TF and NF. c) Relay + starting capacitor (with bracket) + cover/protector/protector holder (parts of compressor), used for compressors with the denomination SC which have an external protector. The starting device requires no pressure-equalization before each start and is normally used in refrigerating systems with expansion valve as throttling device or in capillary tube systems where pressure equalizing is not obtained during the standstill periods. The starting capacitor is designed for short time cut-in. 1.7% ED, which is stamped on the starting capacitor, means for instance max. 10 cutins per hour each with a duration of 6 seconds (normally shorter than 1 sec.).

8077-2

SC (external protector)

3.5 HST (CSR)

Compressors with the motor type Capacitor Start Run (CSR) have a starting device for High Starting Torque (HST). The following designs of starting devices exist: a) Relay + starting capacitor + run capacitor + terminal board + cord relief + cover, used for compressors with the denomination SC. b) Relay + starting capacitor (with bracket) run capacitor + cover/protector/protector holder (parts of compressor), used for compressors with the denomination SC which have an external protector. The starting device is mandatory for some of the biggest SC compressors. The starting capacitor is designed for short time cut-in. 1.7% ED, which is stamped on the starting capacitor, means for instance max. 10 cut-ins per hour each with a duration of 6 seconds. For further information on which starting device to use on individual compressors, please refer to the actual datasheets (some compressors have limitations for either LST or HST).

3.6 Connections

The electrical equipments are equipped with connectors depending on the ordered code number, Starting relays: 6.3 mm spade connectors only The power supply must be connected as shown in the wiring diagrams for the chosen electrical equipment given in the actual datasheets.

3.7 Approvals

SC12MLX 115V-60Hz 1PH

THERMALLY PROTECTED

Approval mark
The compressors have been approved in respect of safety by testing authorities in the majority of Western European countries. Actual standards to which the compressors have been approved are specified in the individual datasheets. Approval markings appear on the compressor labels. Most compressors which are capable of running at 60Hz have been approved in respect of safety by testing authorities UL and CSA. Actual standards to which the compressors have been approved are specified in the individual datasheets. Approval markings appear on a separate approval mark label.

8459-4

8467-2
4. Moisture and Impurities
The compressors are dried to a maximum moisture content of 60 to 75 mg depending on the compressor size. The maximum impurity content is 40 to 50 mg depending on the compressor size.
5. Max. refrigerant charge
The refrigerant charge must never be too large to be contained on the condenser side of the refrigeration system. Only the refrigerant amount which is necessary for the system to function must be charged. The refrigerant amount may be critical as regards oil foaming and liquid hammer after long standstill periods. Because of this, limitations of refrigerant charges have been introduced. The maximum refrigerant charge is specified in the individual datasheets. If these limitations cannot be complied with, the risk may be reduced if a crankcase heater is properly used or if a pump down system is established.

6. Oil charge

The compressors are supplied charged with dried and degassed oil, which is normally sufficient for the lifetime of the compressor. The refrigeration systems and the system components must be dimensioned in such a way that the oil can be lead back continuously to the compressor housing without accumulating in the system, e.g. without oil pockets and with sufficient gas velocity. The compressors use polyolester oils and are approved only for these oils and R404A/R507 respectively R407C. The oil charge is specified in the individual datasheets.

7. Mounting

Soldering problems caused by oil in the connectors can be avoided by placing the compressor on its baseplate some time before soldering it into the system. The compressor must never be placed upside down when mounting the rubber grommets in the baseplate. Instead place the compressor on its side with the connectors upwards.

11. Warnings

No high potential test nor start tests must be carried out while the compressor is under vacuum. No attempt must be made to start the compressor without a complete starting device. Allow the compressor to assume a temperature above 10C before starting the first time in order to avoid starting problems. Anti-freeze agents must not be used in the compressors as such agents are damaging to several of the materials used. In particular, the ethyl or methyl alcohol contents of such anti-freeze agents have a destructive effect on the synthetic motor insulation.

CK.54.B6.02 9

TL4CL LBP/MBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.52.A1.02) General
Compressor Code number TL4CL 102U2071

Lilac stripe Approvals

Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz LBP/MBP -45 to -- 254 /50 CSIR 38 F2 F2

Yellow background

S O F1 F2
= Static cooling normally sufficient = Oil cooling = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) = Fan cooling 3.0 m/s necessary

Design

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 3.7.6
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 140 5.7 5.7 14.8/14.5 EN 60335-2-34

Dimensions

Height mm A B Suction connector Process connector Discharge connector Compressors on a pallet location/I.D. mm location/I.D. mm location/I.D. mm pcs. C D E 173 169

C or D

6.2 0.09

5.0 +0.12/+0.20 125

157 60.5 66

96 117

CF.52.A2.02

105 107

Barcode on white background

31.5 28

Capacity (EN 12900/CECOMAF)
Comp.\C TL4CL ------23.---10 286

-5 352

Capacity (ASHRAE)
Comp.\C TL4CL ------23.---10 334

-5 411

Power consumption
Comp.\C TL4CL ------23.---10 198

-5 215

Current consumption
Comp.\C TL4CL -45 0.89 -40 0.79 -35 0.80 -30 0.88 -25 1.01 -23.3 1.05 -20 1.14 -15 1.25 -10 1.28

-5 1.31

COP (EN 12900/CECOMAF)
Comp.\C TL4CL -45 0.64 -40 0.72 -35 0.81 -30 0.90 -25 1.02 -23.3 1.06 -20 1.14 -15 1.28 -10 1.45

-5 1.64

COP (ASHRAE)
Comp.\C TL4CL -45 0.74 -40 0.83 -35 0.94 -30 1.05 -25 1.18 -23.3 1.23 -20 1.33 -15 1.50 -10 1.69

-5 1.92

Main winding Winding protector Start winding
Test conditions Condensing temperature Ambient and suction gas temp. Liquid temperature Fan cooling F2, 220V 50Hz
EN 12900/CECOMAF 45C 32C 45C

ASHRAE 45C 32C 32C

Accessories
Devices Starting relay Cover Starting capacitor 60 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d TL4CL 117U6000 103N2010 117U5014 103N1010 118-1917 118-1918 118-1919
TL4DL MBP/HBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.52.B1.02) General
Compressor Code number TL4DL 102U2038
Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz MBP/HBP -20 to - 254 /50 CSIR 38 F2 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 3.7.5
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 175 7.5 7.5 12.0/20.0 EN 60335-2-34

CF.52.B2.02

Comp.\C TL4DL ----7.2 572

10 631

Comp.\C TL4DL ----7.2 672

10 742

Comp.\C TL4DL ----7.2 263

10 272

Comp.\C TL4DL -20 1.22 -15 1.28 -10 1.34 -5 1.1.1.54 7.2 1.56

10 1.60

Comp.\C TL4DL -20 1.16 -15 1.23 -10 1.38 -5 1.1.2.06 7.2 2.17

10 2.32

Comp.\C TL4DL -20 1.36 -15 1.44 -10 1.61 -5 1.2.2.42 7.2 2.55

10 2.73

Devices Starting relay Cover Starting capacitor 60 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d TL4DL 117U6001 103N2010 117U5014 103N1010 118-1917 118-1918 118-1919
NL7CLX LBP/MBP Compressor R404A/R507 220-240V 50Hz

Data Sheet General

Compressor Code number NL7CLX 105F3710

NL7CLX

Blue stripe Approvals
Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C 43C C V/Hz LBP/MBP -45 to -- 254 /50 CSIR 43 F1 F1 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm

7.10.4

204 170
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST watt A A 235 10.4 10.4 8.2/14.7 EN 60335-2-34

100 70

Resistance, main and start winding (25C) Approvals

Height

8.2 0.09 6.2 0.09 6.2 0.09 80

A B 93.5

Suction connector Process connector Discharge connector Compressors on a pallet
location/I.D. mm location/I.D. mm location/I.D. mm pcs.

119 127

CF.53.I1.02
Comp.\C NL7CLX -45 -40 -35 -30 --23.-20 -15 -10
Comp.\C NL7CLX -45 -40 -35 -30 -25 1.64 -23.3 1.68 -20 -15 -10 -5
Comp.\C NL7CLX -45 -40 -35 -30 -25 1.18 -23.3 1.24 -20 -15 -10
Comp.\C NL7CLX -45 -40 -35 -30 -25 1.37 -23.3 1.44 -20 -15 -10
Test conditions Condensing temperature Ambient and suction gas temp. Liquid temperature Fan cooling F2, 220V 50Hz, preliminary data

Devices Starting relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d NL7CLX 117U6002 103N2010 117U5015 103N1010 118-1917 118-1918 118-1919
FR6CL LBP/MBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.53.A1.02) General
Compressor Code number FR6CL 103U2670
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 6.10.5

178 19

Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 215

101.60.5

8.2 8.2 8.9/12.0 EN 60335-2-34
Height mm A B Suction connector Process connector Discharge connector Compressors on a pallet location/I.D. mm location/I.D. mm location/I.D. mm pcs. C D E 8.2 0.09 6.2 0.09 6.2 0.09 80

124.5 127.5

CF.53.A2.02
Comp.\C FR6CL ------23.---10 473

-5 578

Comp.\C FR6CL ------23.---10 553

-5 676

Comp.\C FR6CL ------23.---10 353

-5 395

Comp.\C FR6CL -45 1.13 -40 1.18 -35 1.26 -30 1.35 -25 1.46 -23.3 1.51 -20 1.60 -15 1.75 -10 1.91

-5 2.09

Comp.\C FR6CL -45 0.61 -40 0.71 -35 0.80 -30 0.90 -25 1.00 -23.3 1.04 -20 1.11 -15 1.22 -10 1.34

-5 1.47

Comp.\C FR6CL -45 0.71 -40 0.82 -35 0.94 -30 1.05 -25 1.17 -23.3 1.21 -20 1.29 -15 1.43 -10 1.57

-5 1.71

Devices Starting relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d FR6CL 117U6015 103N2010 117U5015 103N1010 118-1917 118-1918 118-1919
FR6DL MBP/HBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.53.C1.02) General
Compressor Code number FR6DL 103U2680
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 275
10.0 10.0 7.3/12.0 EN 60335-2-34

CF.53.C2.02

Comp.\C FR6DL ----7.10 999

15 1177

Comp.\C FR6DL ----7.10 1176

15 1389

Comp.\C FR6DL ----7.10 485

15 509

Comp.\C FR6DL -20 1.91 -15 1.99 -10 2.10 -5 2.2.2.51 7.2 2.2.62

15 2.70

Comp.\C FR6DL -20 1.09 -15 1.20 -10 1.33 -5 1.1.1.84 7.2 1.2.06

15 2.31

Comp.\C FR6DL -20 1.27 -15 1.40 -10 1.56 -5 1.1.2.16 7.2 2.2.42

SC15DL MBP/HBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.M2.02) General
Compressor Code number SC15DL 104L2856

SC15DL

Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz MBP/HBP -20 to - 254 /50 CSR 38 F2 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 15.13.5
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 550
21.8 3.5/12.2 EN 60335-2-34

CF.54.M3.02

8306-5
Comp.\C SC15DL ----7.10 2652

15 3156

Comp.\C SC15DL ----7.10 3109

15 3710

Comp.\C SC15DL ----7.10 896

15 918

Comp.\C SC15DL -20 3.09 -15 3.46 -10 3.79 -5 4.4.4.50 7.2 4.4.64

15 4.75

Start winding

Bleeder resistance

Comp.\C SC15DL -20 1.29 -15 1.46 -10 1.67 -5 1.2.2.56 7.2 2.2.96

15 3.44

Main winding Winding protector

N L N L

Comp.\C SC15DL -20 1.50 -15 1.70 -10 1.95 -5 2.2.2.99 7.2 3.3.47

15 4.04

Thermostat
Devices Starting device a3 Cover Starting relay Starting capacitor Run capacitor Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities b a2 c e d Fig. SC15DL 117-7028 (470 mm cable length) 117-7029 (550 mm cable length) 117-7032 (650 mm cable length) 103N2009 Components of starting device 103N1004 118-1917 118-1918 118-1919
SC18CL LBP/MBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.D1.02) General
Compressor Code number SC18CL 104L2123

SC18CL

Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz LBP/MBP -45 to -- 254 /50 CSR 38 F2 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 17.13.7
20.0 3.7/14.1 EN 60335-2-34

CF.54.D2.02

8296-3
Comp.\C SC18CL ------23.---10 1425

-5 1735

Comp.\C SC18CL ------23.---10 1659

-5 2022

Comp.\C SC18CL ------23.---10 894

-5 1008

Comp.\C SC18CL -45 2.61 -40 2.80 -35 3.02 -30 3.29 -25 3.60 -23.3 3.72 -20 3.96 -15 4.36 -10 4.80

-5 5.29

Main winding
Comp.\C SC18CL -45 0.57 -40 0.72 -35 0.87 -30 1.01 -25 1.16 -23.3 1.21 -20 1.31 -15 1.46 -10 1.59

-5 1.72

-30 -25 -23.3 -20 -15 -10 -5 1.01 1.16 1.21 1.31 1.46 1.59 1.72
Comp.\C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -5 SC18/18CL 0.66 0.83 1.00 1.18 1.35 1.41 1.52 1.69 1.85 2.01
Devices Starting device Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. 2 SC18/18CL 117-7012 (470 mm cable length) 117-7027 (550 mm cable length) 103N2009 103N1004 117N0001 020-1014 118-7351 (16 mm) 118-7405 (16 mm) 118-3638
SC21/21CL LBP Twin Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.J1.02) General
Compressor Code number SC21/21CL 104L4094

SC21/21CL

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 2 x 20.95 1220
Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* Resistance, main and start winding (25C) Approvals watt A A 2 x 590 23.4 23.4 3.4/14.4 EN 60335-2-34 * Operational current for the second compressor time-delayed.

CF.54.J2.02

8297-3
Comp.\C SC21/21CL -----25 -23.3 --15 2613

-10 3213

Comp.\C SC21/21CL -----25 -23.3 --15 3049

-10 3753

Comp.\C SC21/21CL -----25 -23.1466 --15 1782

-10 1978

Comp.\C -45 SC21/21CL 4.80 -40 5.27 -35 5.88 -30 6.61 -25 7.42 -23.3 7.71 -20 8.28 -15 9.15

-10 9.99

Comp.\C -45 SC21/21CL 0.57 -40 0.70 -35 0.85 -30 1.00 -25 1.16 -23.3 1.21 -20 1.31 -15 1.47
Comp.\C -45 SC21/21CL 0.66 -40 0.82 -35 0.99 -30 1.17 -25 1.35 -23.3 1.41 -20 1.53

-15 1.71 -10 1.90

Devices Starting device Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. 2 SC21/21CL 117-7012 (470 mm cable length) 117-7027 (550 mm cable length) 103N2009 103N1004 117N0001 020-1014 118-7351 (16 mm) 118-7405 (16 mm) 118-3638
SC12CLX LBP Compressor R404A/R507 220-240V 60Hz
Data Sheet (Replaces CF.54.T2.02) General
Compressor Code number SC12CLX 104L2695

SC12CLX

Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz LBP -40 to -- 254 /60 CSIR 38 F2 F2

SC12CLX 230V-60Hz 1PH

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 12.13.7

178 170

F2 S O F1
18.6 3.7/14.1 UL984/CSA-C22.2

CF.54.T3.02

8349-5

8349-2

Comp.\C SC12CLX -----23.--15 972

-10 1200

Comp.\C SC12CLX -----23.--15 1130

-10 1397

Comp.\C SC12CLX -----23.--15 696

-10 784

SC10/10CLX LBP/MBP Twin Compressor R404A/R507 220-240V 60Hz
Compressor Code number SC10/10CLX 104L4033

SC10/10CLX

Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz LBP/MBP -35 to -- 254 /60 CSIR 38 F2 F2
Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* watt A A 2 x 385 14.8 14.8 5.0/13.7 * Operational current for the second compressor time-delayed.

January 2002

CJ.54.F1.02
Comp.\C SC10/10CLX ----23.---10 1812

-5 2192

Comp.\C SC10/10CLX ----23.---10 2108

-5 2554

Comp.\C SC10/10CLX ----23.---10 1246

-5 1414

Comp.\C SC10/10CLX -35 4.38 -30 4.72 -25 5.10 -23.3 5.24 -20 9.78 -15 6.04 -10 6.60

-5 7.22

Comp.\C SC10/10CLX -35 0.74 -30 0.90 -25 1.06 -23.3 1.11 -20 1.20 -15 1.34 -10 1.45

-5 1.55

Comp.\C SC10/10CLX -35 0.85 -30 1.05 -25 1.23 -23.3 1.29 -20 1.40 -15 1.55

-10 1.69 -5 1.81

Devices Starting relay Starting capacitor 80 F Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. SC10/10CLX 117U6005 117U5019 103N2009 103N1004 117N0001 020-1014 118-7350 (12 mm) 104B0584 (12 mm) 118-3638
SC12/12CLX LBP Twin Compressor R404A/R507 220-240V 60Hz
Compressor Code number SC12/12CLX 104L4034

SC12/12CLX

Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* watt A A 2 x 495 18.6 18.6 3.7/14.1 * Operational current for the second compressor time-delayed.

CJ.54.G1.02

8461-2
Comp.\C SC12/12CLX -----23.--15 1944

-10 2400

Comp.\C SC12/12CLX -----23.--15 2260

-10 2794

Comp.\C SC12/12CLX -----23.--15 1392

-10 1568

Comp.\C SC12/12CLX -40 5.16 -35 5.50 -30 5.92 -25 6.46 -23.3 6.66 -20 7.08 -15 7.82

-10 8.64

Comp.\C SC12/12CLX -40 0.53 -35 0.75 -30 0.93 -25 1.09 -23.3 1.15 -20 1.25 -15 1.40
Comp.\C SC12/12CLX -40 0.61 -35 0.87 -30 1.08 -25 1.27 -23.3 1.33 -20 1.45

-15 1.62 -10 1.78

Devices Starting relay Starting capacitor 80 F Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. SC12/12CLX 117U6019 117U5019 103N2009 103N1004 117N0001 020-1014 118-7350 (12 mm) 104B0584 (12 mm) 118-3638
SC15/15CLX LBP Twin Compressor R404A/R507 220-240V 60Hz
Compressor Code number SC15/15CLX 104L4097

SC15/15CLX

Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* watt A A 2 x 550 21.8 21.8 3.5/12.1 * Operational current for the second compressor time-delayed.

Evap. temp in C SC10CLX, 50Hz SC10CLX, 60Hz -304 -370 -430 -23.450 -489 -552 -623 -597
Evap. temp in C -35 SC10CLX, 50Hz 2.00 SC10CLX, 60Hz 2.19 -30 2.15 2.36 -25 2.32 2.55 -23.3 2.38 2.62 -20 2.51 2.77 -15 2.72 3.02 -10 2.94 3.30 -5 3.19 3.3.45

5 3.73

Evap. temp in C -35 SC10CLX, 50Hz 0.64 SC10CLX, 60Hz 0.74 -30 0.84 0.90 -25 1.02 1.06 -23.3 1.08 1.11 -20 1.20 1.20 -15 1.37 1.34 -10 1.55 1.45 -5 1.76 1.1.99

5 2.27

Evap. temp in C -35 SC10CLX, 50Hz 0.75 SC10CLX, 60Hz 0.85 -30 0.98 1.05 -25 1.19 1.23 -23.3 1.26 1.29 -20 1.39 1.40 -15 1.59 1.55 -10 1.81 1.69 -5 2.05 1.2.33

5 2.65

Test conditions Condensing temperature Ambient and suction gas temp. Liquid temperature 50Hz: Fan cooling F2, 220V 60Hz: Fan cooling F2, 220V
Devices Starting Relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d SC10CLX 117U6005 103N2008 117U5019 103N1004 118-1917 118-1918 118-1919
SC10MLX MBP Compressor R404A/R507 220-240V 50Hz & 208-230V 60Hz
Compressor Code number SC10MLX 104L2506

SC10MLX

Application Evaporating temperature range Voltage range C (F) V/Hz MBP -23.3 to 7.2 (-10 to 45) 187 - 254 /- 254 /60 Motor type Max. ambient temperature C (F) CSIR 43 (110) F2 F2 F2

SC10MLX 1PH

8465-2
Comp. cooling at ambient temp. 32C (90F) 38C (100F) 43C (110F)
S O F1 = Static cooling normally sufficient = Oil cooling = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) = Fan cooling 3.0 m/s necessary
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST

watt A A

470 18.4 18.4 4.3/15.3 EN 60335-2-34, UL984/CSA-C22.2
Height mm A B B1 B2 Suction connector Process connector Discharge connector Compressors on a pallet location/I.D. mm location/I.D. mm location/I.D. mm pcs. C D E 8.2 0.09 6.5 0.09 6.5 0.09

CJ.54.L1.02

Conditions: ASHRAE MBP 60Hz
Evap. temp inF Evap. temp inC Capacity in Btu/h Power cons. in W Current cons. in A EER in Btu/Wh -10 -23.462 2.88 3.-17.542 3.15 3.-12.619 3.45 4.-10.650 3.58 4.-6.697 3.79 5.-1.778 4.18 5.4.867 4.60 6.7.916 4.83 6.77
Conditions: ASHRAE MBP 50Hz
Evap. temp inF Evap. temp inC Capacity in Btu/h Power cons. in W Current cons. in A EER in Btu/Wh -10 -23.428 3.35 3.-17.483 3.52 3.-12.536 3.70 4.-10.557 3.78 4.-6.587 3.90 5.-1.638 4.12 5.4.687 4.36 6.7.712 4.49 7.34
Conditions: EN 12900/CECOMAF (no subcooling) 60Hz

SC12MLX MBP Compressor R404A/R507 220-240V 50Hz & 208-230V 60Hz
Compressor Code number SC12MLX 104L2606

SC12MLX 1PH

8465-4

12.13.9

590 23.4 23.4 3.4/14.4 EN 60335-2-34, UL984/CSA-C22.2

151 59.3

8432-2

CJ.54.M1.02

8365-3
Evap. temp inF Evap. temp inC Capacity in Btu/h Power cons. in W Current cons. in A EER in Btu/Wh -10 -23.551 3.39 3.-17.646 3.70 3.-12.738 4.06 4.-10.775 4.21 4.-6.831 4.46 5.-1.928 4.92 5.4.1035 5.42 6.7.1092 5.69 6.64
Evap. temp inF Evap. temp inC Capacity in Btu/h Power cons. in W Current cons. in A EER in Btu/Wh -10 -23.507 3.72 3.-17.575 3.92 3.-12.641 4.15 4.-10.667 4.25 4.-6.705 4.40 5.-1.768 4.67 6.4.829 4.96 6.7.860 5.11 7.33

c a2 b a2 Start winding

Evap. temp inC Evap. temp inF Capacity in W Power cons. in W Current cons. in A COP in W/W -23.3 -561 3.38 1.18 -20 -601 3.52 1.29 -3.76 1.46 -4.05 1.64 -6.4.26 1.77 -4.37 1.882 4.73 2.975 5.14 2.17

c Main winding

Thermostat Winding protector
Evap. temp inC Evap. temp inF Capacity in W Power cons. in W Current cons. in A COP in W/W -23.3 -493 3.67 1.16 -20 -525 3.76 1.27 -3.91 1.46 -4.08 1.68

-6.4.20 1.83

-4.27 1.91

4.47 2.16

4.69 2.43
Devices Starting Relay Starting Relay (alternative) Cover Starting capacitor 80 F Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 a2 b c SC12MLX 117-7426 117-7422 1117U1021 117U5019 118-1917 118-1918 118-1919
TF4CLX LBP/MBP Compressor R404A/R507 115-127V 60Hz
Data Sheet (Replaces CF.52.E1.22) General
Compressor Connector-material Copper-plated steel Copper-plated steel Copper Sealing Aluminium caps Rubber plugs Rubber plugs 102U2102
Lilac stripe Barcode on white background Green background

TF4CLX Code number

TF4CLX
Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at max. ambient temperature 110F (43C) F1
LBP/MBP F (C) V/Hz -49 to 45 (-45 to 7.2) 95 - 135 /60 CSIR F (C) 110 (43)

Test conditions Condensing temp. Suction gas temp. Ambient temp. Liquid temp. Cooling V/Hz
ASHRAE in Btu/Wh - EN 12900/CECOMAF in W/W
ASHRAE LBP ASHRAE LBP* ASHRAE MBP EN 12900 130F (54.4C) 110F (43.3C) 130F (54.4C) 45C (113F) 90F (32C) 90F (32C) 95F (35C) 32C (90F) 90F (32C) 90F (32C) 95F (35C) 32C (90F) 90F (32C) 90F (32C) 115F (46C) 45C (113F) Fan F1 Fan F1 Fan F1 Fan F1 115/60 115/60 115/60 115/60

120 (49) 135 (58)

Design limits: Max. cond. temp. F (C) stable Max. cond. temp. F (C) peak preliminary data
Devices Starting relay (Klixon incl.) Klixon Starting capacitor 280 F Cover Cord relief Cord relief for capacitor Mounting accessories Bolt joint in quantities Bolt joint in quantities Snap-on in quantities Fig. a2 c b d dc in. (mm) 5 /8 (16) 3 /4 (19) 5 /8 (16) TF4CLX 117U4148 MRP36EN-6 117U5025 117U1021 117U0349 117U0349 118-1945 118-1948 118-1944
TFS4.5CLX LBP Compressor R404A/R507 115-127V 60Hz
Data Sheet (Replaces CF.52.D1.22) General
Compressor Connector-material Copper-plated steel Copper-plated steel Copper Sealing Aluminium caps Rubber plugs Rubber plugs 102U2103

TFS4.5CLX Code number

Application Lilac stripe

TFS4.5CLX

R404A SUCTION R507 CONNECTOR
LBP F (C) V/Hz -49 to 20 (-45 to -6.7) 103 - 135 /60 CSIR F (C) 110 (43)

TFS4CLX 115V-60Hz 1PH

0.29 (4.63) 9.5 (280) 14.0 (400)

CF.52.D2.22

8405-2
Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* CECOMAF -49 --40 -407 100
-30 -34.-20 -28.-13 --10 -23.0 -17.10 -12.20 -6.2034 509
Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* CECOMAF -49 --40 --30 -34.-20 -28.-13 --10 -23.0 -17.10 -12.291 292

20 -6.340 342

Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* CECOMAF -49 -45 2.18 2.23 2.21 -40 -40 2.26 2.29 2.28 -30 -34.4 2.40 2.39 2.39 -20 -28.9 2.60 2.55 2.55 -13 -25 2.76 2.70 2.70 -10 -23.3 2.84 2.76 2.-17.8 3.14 3.03 3.-12.2 3.48 3.34 3.35

20 -6.7 3.88 3.70 3.72

Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* CECOMAF
-49 -45 2.10 2.55 0.62 -40 -40 2.56 3.01 0.75 -30 -34.4 3.06 3.56 0.89 -20 -28.9 3.56 4.14 1.03 -13 -25 3.91 4.53 1.13 -10 -23.3 4.06 4.69 1.-17.8 4.53 5.20 1.-12.2 4.97 5.63 1.-6.7 5.36 5.98 1.49
ASHRAE LBP ASHRAE LBP* EN 12900 130F (54.4C) 110F (43.3C) 45C (113F) 90F (32C) 90F (32C) 32C (90F) 90F (32C) 90F (32C) 32C (90F) 90F (32C) 90F (32C) 45C (113F) Fan F1 Fan F1 Fan F1 115/60 115/60 115/60
Design limits: Max. cond. temp. F (C) stable Max. cond. temp. F (C) peak
Devices Starting relay (Klixon incl.) Klixon Starting capacitor 280 F Cover Cord relief Cord relief for capacitor Mounting accessories Bolt joint in quantities Bolt joint in quantities Snap-on in quantities Fig. a2 c b d dc in. (mm) 5 /8 (16) 3 /4 (19) 5 /8 (16) TFS4.5CLX 117U4148 MRP36EN-6 117U5025 117U1021 117U0349 117U0349 118-1945 118-1948 118-1944

CJ.54.E1.22

30.9 (14.0)

49.4 (1460)

8459-6

8459-5

Evap. temp in F Evap. temp in C ASHRAE MBP EN 12900 -10 -23.770

0 -17.-12.-6.-1.4.7.2698

Evap. temp in F Evap. temp in C ASHRAE MBP EN 12900 -10 -23.-17.-12.-6.-1.4.1216

45 7.1259

Evap. temp in F Evap. temp in C ASHRAE MBP EN 12900 -10 -23.3 9.88 9.-17.8 10.59 10.-12.2 11.37 11.-6.7 12.24 11.-1.1 13.17 12.4.4 14.19 13.5 14.29 13.46

45 7.2 14.72 13.82

R S 5 2
Evap. temp in F Evap. temp in C ASHRAE MBP EN 12900 -10 -23.3 3.19 1.06
0 -17.8 3.64 1.-12.2 4.16 1.-6.7 4.74 1.-1.1 5.37 1.4.4 6.06 2.5 6.13 2.7.2 6.42 2.14
EN 12900/CECOMAF 45C (113F) 32C (90F) 32C (90F) 45C (113C) Fan F2 115/60
Devices Run capacitor 23.5 F Devices Starting relay Starting capacitor 410 F Cover Protector Protector holder Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. e Fig. a2 c b f h in. (mm) 5 /8 (16) 5 /8 (16) 5 /8 (16) parts of compressor CSR (pos.1) 117-7114 CSR/CSIR (pos.1 & pos.2) 117-7441 117U5028 (117U1021) (117U3212) (117U0438) 118-1917 118-1918 118-1919
a2 b a2 Start winding Main winding
SC10DL MBP/HBP Compressor R407C 220-240V 50Hz
Data Sheet (Replaces CF.54.V1.02) General
Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz MBP/HBP -15 to - 254 /50 CSIR 38 F2 F2
14.8 5.0/13.7 EN 60 335-2-34

CF.54.V2.02

Comp.\C SC10DL ---7.10 1588

15 1927

Comp.\C SC10DL ---7.10 1706

15 2073

Comp.\C SC10DL ---7.10 540

15 568

Comp.\C SC10DL -15 2.50 -10 2.66 -5 2.2.3.08 7.2 3.3.20

15 3.31

Comp.\C SC10DL -15 1.39 -10 1.61 -5 1.2.2.54 7.2 2.2.94

15 3.40

Comp.\C SC10DL -15 1.49 -10 1.73 -5 2.2.2.72 7.2 2.3.16

15 3.65

EN 12900/CECOMAF 45C 32C no subcooling
SC12DL MBP/HBP Compressor R407C 220-240V 50Hz
Data Sheet (Replaces CF.54.W1.02) General
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm 3 cm3 g cm3 kg 12.13.6

CF.54.W2.02

Comp.\C SC12DL ---7.10 2031

15 2456

Comp.\C SC12DL ---7.10 2182

15 2642

Comp.\C SC12DL ---7.10 675

15 700

Comp.\C SC12DL -15 3.11 -10 3.31 -5 3.3.3.79 7.2 3.3.91

15 4.01

Comp.\C SC12DL -15 1.39 -10 1.62 -5 1.2.2.58 7.2 2.3.01

15 3.51

Comp.\C SC12DL -15 1.48 -10 1.74 -5 2.2.2.77 7.2 2.3.23

15 3.77

SC15DL MBP/HBP Compressor R407C 220-240V 50Hz
Data Sheet (Replaces CF.54.X1.02) General