COMPRESSORS

Collection of Datasheets
Compressors for R404A/R507 & R407C 220-240V 50Hz & 60Hz, 115V 60Hz
R E F R I G E R AT I O N A N D A I R C O N D I T I O N I N G
R404A/R507, 220-240V 50Hz
T-Series TL4CL TL4DL N-Series NL7CLX F-Series FR6CL FR6DL FR7.5CL FR8.5CL (LBP/MBP) (MBP/HBP) Page 10 Page 12
R404A/R507, 220-240V 50/60Hz
S-Series SC10CLX SC10MLX SC12CLX.2 SC12MLX (LBP/MBP) (MBP) (LBP) (MBP) Page Page Page Page 70 72

(LBP/MBP)

Page 14
(LBP/MBP) (MBP/HBP) (LBP/MBP) (LBP)

Page Page Page Page

R404A/R507, 115V 60Hz
T-Series TF4CLX TFS4.5CLX N-Series NF5.5CLX NF7CLX S-Series SC10CL SC12CL SC12CLX.2 SC12MLX SC15CLX.2 SC15MLX (LBP/MBP) (LBP) Page 74 Page 76
S-Series SC10CL (LBP/MBP) SC10DL (MBP/HBP) SC12CL (LBP/MBP) SC12DL (MBP/HBP) SC15CL (LBP/MBP) SC15DL (MBP/HBP) SC18CL (LBP/MBP) SC21CL (LBP) S-Series (Twins) SC10/10CL (LBP/MBP) SC10/10DL (MBP/HBP) SC12/12CL (LBP/MBP) SC12/12DL (MBP/HBP) SC15/15CL (LBP/MBP) SC15/15DL (MBP/HBP) SC18/18CL (LBP/MBP) SC21/21CL (LBP)
Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page

(LBP/MBP) (LBP/MBP)

Page 78 Page 80
(LBP/MBP) (LBP) (LBP) (MBP) (LBP) (MBP)
Page Page Page Page Page Page

R407C, 220-240V 50Hz

S-Series SC10DL (MBP/HBP) SC12DL (MBP/HBP) SC15DL (MBP/HBP) S-Series (Twins) SC10/10DL (MBP/HBP) SC12/12DL (MBP/HBP) SC15/15DL (MBP/HBP) Page 94 Page 96 Page 98 Page 100 Page 102 Page 104
R404A/R507, 220-240V 60Hz
S-Series SC12CLX (LBP) SC15CLX (LBP) S-Series (Twins) SC10/10CLX (LBP/MBP) SC12/12CLX (LBP) SC15/15CLX (LBP) Page 56 Page 58 Page 60 Page 62 Page 64

CK.54.B6.02

September 2002

1. General

This collection of datasheets contains information on Danfoss hermetic refrigeration compressors for 220-240V and 115V especially designed for refrigeration systems using refrigerant R404A (CHF2CF3 / CH3CF3 / CH2FCF3) / R507 (CHF2CF3 / CH3CF3) and R407C (CH2F2 / CHF2CF3 / CH2FCF3). The programme consists of the basic types TL, TF, NL, NF, FR, SC and SC Twin.

8238-3

8238-4

8238-5

TL (TF similar)

NL (NF similar)

8238-6 8238-7

SC Twin

1.1 Compressor designations
The compressor designations are built up according to the following system:
Design Optimization level Compressor size Application range Start Generation characteristics
TL, TF CL R404/R507 LBP (MBP) NL, NF Blank Standard energy level S Semi-direct intake Nominal displacement in cm3 DL R404/R507 HBP R407C HBP Blank First generation
Blank universal (principal rule)
.2 X = HST Second characteristics generation ML (capillary tube) R404/R507 MBP etc.

Examples

TF NL FR SC

4.6 15

CL CL DL CL

X X X.2

1.2 Design
All Danfoss compressors for R404A/R507 and R407C from the TL, TF, NL, NF, FR, and SC range are standard efficiency types. Compressors for 220-240V have a yellow label with the type designation. This label has a lilac stripe and the text R404A R507 or R404A R407C R507. Compressors for 115V have a green label with the type designation. This label has a lilac stripe and the text R404A R507.

Mains [V/Hz] 198 - 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 254 /- 135 /- 135 /- 135 /- 135 /- 135 /- 135 /- 127 /- 127 /- 127 /- 135 /- 135 /- 135 /- 254 /- 254 /50 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2
32C F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2
Ambient temperature 38C F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2
LBP MBP HBP LBP MBP HBP LBP MBP HBP
F1 F1 F2 F2 F2 F2 F2 F2 F2

F2 F2 F1

F2 F2 F2

F2 F2 F2 F2 F2

S O F1 F2 * **

= = = = = = =

Static cooling normally sufficient Oil cooling Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temp.) Fan cooling 3.0 m/s necessary Outside application range, not recommended Run capacitor compulsory Not applicable below -25C evaporating temperature in 43C ambient temperature above 240V
The application limits regarding evaporating temperatures and motor systems are specified in the individual compressor datasheets.

2.1 Design limits

Condensing temperature Winding temperature
In order to secure a satisfying lifetime of the compressor, and to protect the compressor against overload, some design criteria for the appliances must be fulfilled. Both the condensing temperature and the compressor temperature should be kept as low as possible. This can be done by using well-dimensioned condenser surfaces and by ensuring good ventilation around the compressor under all operating conditions. In order to protect the compressor against overload, the compressor has to start and work properly through pressure peaks obtained in the highest ambient temperature and lowest working voltage. At peak load the condensing temperature must not exceed 60C. The winding temperature must not exceed 135C. At stable operation conditions the condensing temperature must not exceed 50C. The winding temperature must not exceed 125C. These limitations ensure a protection of valves, gaskets, oil, and motor insulation.

3. Electrical equipment

The compressors are equipped with a single-phase AC motor. All compressors for R404A/ R507 and R407C are designed only for use with High Starting Torque (HST). The electrical equipments are classified as normal tight (IP20). The motor protector is built into the motor (winding protector). Exception are compressors with the denominations TF and NF and some SCs. Earth connections are located on the bracket around the current lead-in of the compressor. No attempt must be made to start the compressor without a complete starting device. The compressors can be supplied with the following motor systems:

3.1 HST (CSIR)

TL, NL, FR

TF, NF

Compressors with the motor type Capacitor Start Induction Run (CSIR) have a starting device for High Starting Torque (HST). This starting device consists of a starting relay and a starting capacitor and is used for compressors with the denominations TL, TF, NL, NF, FR and SC. The following designs of starting devices exist: a) Relay + starting capacitor + cord relief + cover, used for compressors with the denominations TL, NL, FR and SC. b) Relay housing including motor protector + starting capacitor + cord relief (2x) + cover, used for compressors with the denomination TF and NF. c) Relay + starting capacitor (with bracket) + cover/protector/protector holder (parts of compressor), used for compressors with the denomination SC which have an external protector. The starting device requires no pressure-equalization before each start and is normally used in refrigerating systems with expansion valve as throttling device or in capillary tube systems where pressure equalizing is not obtained during the standstill periods. The starting capacitor is designed for short time cut-in. 1.7% ED, which is stamped on the starting capacitor, means for instance max. 10 cutins per hour each with a duration of 6 seconds (normally shorter than 1 sec.).

8077-2

SC (external protector)

3.5 HST (CSR)

Compressors with the motor type Capacitor Start Run (CSR) have a starting device for High Starting Torque (HST). The following designs of starting devices exist: a) Relay + starting capacitor + run capacitor + terminal board + cord relief + cover, used for compressors with the denomination SC. b) Relay + starting capacitor (with bracket) run capacitor + cover/protector/protector holder (parts of compressor), used for compressors with the denomination SC which have an external protector. The starting device is mandatory for some of the biggest SC compressors. The starting capacitor is designed for short time cut-in. 1.7% ED, which is stamped on the starting capacitor, means for instance max. 10 cut-ins per hour each with a duration of 6 seconds. For further information on which starting device to use on individual compressors, please refer to the actual datasheets (some compressors have limitations for either LST or HST).

3.6 Connections

The electrical equipments are equipped with connectors depending on the ordered code number, Starting relays: 6.3 mm spade connectors only The power supply must be connected as shown in the wiring diagrams for the chosen electrical equipment given in the actual datasheets.

3.7 Approvals

SC12MLX 115V-60Hz 1PH

THERMALLY PROTECTED

Approval mark
The compressors have been approved in respect of safety by testing authorities in the majority of Western European countries. Actual standards to which the compressors have been approved are specified in the individual datasheets. Approval markings appear on the compressor labels. Most compressors which are capable of running at 60Hz have been approved in respect of safety by testing authorities UL and CSA. Actual standards to which the compressors have been approved are specified in the individual datasheets. Approval markings appear on a separate approval mark label.

Lilac stripe Approvals

Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz LBP/MBP -45 to -- 254 /50 CSIR 38 F2 F2

Yellow background

S O F1 F2
= Static cooling normally sufficient = Oil cooling = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) = Fan cooling 3.0 m/s necessary

Design

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 3.7.6
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 140 5.7 5.7 14.8/14.5 EN 60335-2-34

Dimensions

Height mm A B Suction connector Process connector Discharge connector Compressors on a pallet location/I.D. mm location/I.D. mm location/I.D. mm pcs. C D E 173 169

C or D

6.2 0.09

5.0 +0.12/+0.20 125

157 60.5 66

96 117

CF.52.A2.02

105 107

Barcode on white background

31.5 28

Capacity (EN 12900/CECOMAF)
Comp.\C TL4CL ------23.---10 286

-5 352

Capacity (ASHRAE)
Comp.\C TL4CL ------23.---10 334

-5 411

Power consumption
Comp.\C TL4CL ------23.---10 198

-5 215

Current consumption
Comp.\C TL4CL -45 0.89 -40 0.79 -35 0.80 -30 0.88 -25 1.01 -23.3 1.05 -20 1.14 -15 1.25 -10 1.28

-5 1.31

COP (EN 12900/CECOMAF)
Comp.\C TL4CL -45 0.64 -40 0.72 -35 0.81 -30 0.90 -25 1.02 -23.3 1.06 -20 1.14 -15 1.28 -10 1.45

-5 1.64

COP (ASHRAE)
Comp.\C TL4CL -45 0.74 -40 0.83 -35 0.94 -30 1.05 -25 1.18 -23.3 1.23 -20 1.33 -15 1.50 -10 1.69

-5 1.92

Main winding Winding protector Start winding
Test conditions Condensing temperature Ambient and suction gas temp. Liquid temperature Fan cooling F2, 220V 50Hz

-5 1.71

Devices Starting relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d FR6CL 117U6015 103N2010 117U5015 103N1010 118-1917 118-1918 118-1919
FR6DL MBP/HBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.53.C1.02) General
Compressor Code number FR6DL 103U2680
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 275
10.0 10.0 7.3/12.0 EN 60335-2-34

CF.53.C2.02

Comp.\C FR6DL ----7.10 999

15 1177

Comp.\C FR6DL ----7.10 1176

15 1389

Comp.\C FR6DL ----7.10 485

15 509

Comp.\C FR6DL -20 1.91 -15 1.99 -10 2.10 -5 2.2.2.51 7.2 2.2.62

15 2.70

Comp.\C FR6DL -20 1.09 -15 1.20 -10 1.33 -5 1.1.1.84 7.2 1.2.06

15 2.31

Comp.\C FR6DL -20 1.27 -15 1.40 -10 1.56 -5 1.1.2.16 7.2 2.2.42

15 2.73

Devices Starting relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d FR6DL 117U6010 103N2010 117U5015 103N1010 118-1917 118-1918 118-1919
FR7.5CL LBP/MBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.53.D1.02) General
Compressor Code number FR7.5CL 103U2790

FR7.5CL

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 6.10.6
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 235
9.1 9.1 8.8/12.0 EN 60335-2-34

CF.53.D2.02

8295-3
Comp.\C FR7.5CL ------23.---10 515

-5 630

Comp.\C FR7.5CL ------23.---10 602

-5 737

Comp.\C FR7.5CL ------23.---10 395

-5 440

Comp.\C FR7.5CL -45 1.39 -40 1.44 -35 1.52 -30 1.62 -25 1.75 -23.3 1.81 -20 1.91 -15 2.09 -10 2.28

-5 2.51

Comp.\C FR7.5CL -45 0.61 -40 0.68 -35 0.78 -30 0.88 -25 0.98 -23.3 1.02 -20 1.09 -15 1.20 -10 1.30

-5 1.43

186 218

B A B2

107 115

August 2002

CF.54.A2.02

70 150
Comp.\C SC10CL ----23.---10 800

-5 991

Comp.\C SC10CL ----23.---10 932

-5 1154

Comp.\C SC10CL ----23.---10 530

-5 584

Comp.\C SC10CL -35 1.91 -30 2.05 -25 2.22 -23.3 2.27 -20 2.39 -15 2.59 -10 2.81

-5 3.04

Comp.\C SC10CL -35 0.69 -30 0.88 -25 1.04 -23.3 1.09 -20 1.19 -15 1.35 -10 1.51

-5 1.70

Comp.\C SC10CL -35 0.80 -30 1.02 -25 1.21 -23.3 1.27 -20 1.39 -15 1.57 -10 1.76

-5 1.98

Start winding Main winding Winding protector
Devices Starting relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d SC10CL 117U6003 103N2009 117U5017 103N1004 118-1917 118-1918 118-1919
SC10DL MBP/HBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.K2.02) General
Compressor Code number SC10DL 104L2525

R404A R407C R507

Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 385
14.8 5.0/13.7 EN 60335-2-34

CF.54.K3.02

Comp.\C SC10DL ----7.10 1747

15 2085

Comp.\C SC10DL ----7.10 2048

15 2451

Comp.\C SC10DL ----7.10 614

15 631

Comp.\C SC10DL -20 2.55 -15 2.78 -10 2.97 -5 3.3.3.42 7.2 3.3.53

15 3.61

Comp.\C SC10DL -20 1.26 -15 1.42 -10 1.62 -5 1.2.2.46 7.2 2.2.85

15 3.30

Comp.\C SC10DL -20 1.47 -15 1.66 -10 1.89 -5 2.2.2.88 7.2 3.3.34

15 3.88

Devices Starting relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d SC10DL 117U6005 103N2009 117U5017 103N1004 118-1917 118-1918 118-1919
SC12CL LBP/MBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.B1.02) General
Compressor Code number SC12CL 104L2623

SC12CL

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 12.12.5

CF.54.B2.02

8296-4
Comp.\C SC12CL ------23.---10 1048

-5 2022

Comp.\C SC18CL ------23.---10 894

-5 1008

Comp.\C SC18CL -45 2.61 -40 2.80 -35 3.02 -30 3.29 -25 3.60 -23.3 3.72 -20 3.96 -15 4.36 -10 4.80

-5 5.29

Main winding
Comp.\C SC18CL -45 0.57 -40 0.72 -35 0.87 -30 1.01 -25 1.16 -23.3 1.21 -20 1.31 -15 1.46 -10 1.59

-5 1.72

Winding protector
Comp.\C SC18CL -45 0.66 -40 0.83 -35 1.00 -30 1.18 -25 1.35 -23.3 1.41 -20 1.52 -15 1.69 -10 1.86

-5 2.01

Devices Starting device a3 Fig. SC18CL 117-7012 (470 mm cable length) 117-7027 (550 mm cable length) 117-7046 (650 mm cable length) 117-7040 (1000 mm cable length) 103N2009 Components of starting device 103N1004 118-1917 118-1918 118-1919
Cover Starting relay Starting capacitor 80 F Run capacitor Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities

b a2 c e d

SC21CL LBP Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.E1.02) General
Compressor Code number SC21CL 104L2322

SC21CL

Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz LBP -45 to -- 254 /50 CSR 38 F2 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 20.14.0
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST Resistance, main and start winding (25C) Approvals watt A A 590
23.4 3.4/14.4 EN 60335-2-34

CF.54.E2.02

8296-2
Comp.\C SC21CL ------23.--15 1306

-10 1606

Comp.\C SC21CL ------23.--15 1524

-10 1876

Comp.\C SC21CL ------23.--15 891

-10 989

Comp.\C SC21CL -45 2.40 -40 2.63 -35 2.94 -30 3.31 -25 3.71 -23.3 3.86 -20 4.14 -15 4.58

-10 5.00

Comp.\C SC21CL -45 0.57 -40 0.70 -35 0.85 -30 1.00 -25 1.16 -23.3 1.21 -20 1.31 -15 1.47

-10 1.62

Comp.\C SC21CL -45 0.66 -40 0.82 -35 0.99 -30 1.17 -25 1.35 -23.3 1.41 -20 1.53 -15 1.71

-10 1.90

Devices Starting device a3 Cover Starting relay Starting capacitor 80 F Run capacitor Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities b a2 c e d Fig. SC21CL 117-7012 (470 mm cable length) 117-7027 (550 mm cable length) 117-7040 (1000 mm cable length) 103N2009 Components of starting device 103N1004 118-1917 118-1918 118-1919
SC10/10CL LBP/MBP Twin Compressor R404A/R507 220-240V 50Hz
Data Sheet (Replaces CF.54.F1.02) General
Compressor Code number SC10/10CL 104L4087

SC10/10CL

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm3 g cm3 kg 2 x 10.29 1220
Motor size LRA (rated after 4 sec. UL984) HST* Cut-in current HST* Resistance, main and start winding (25C) Approvals watt A A 2 x 315 12.6 12.6 6.7/11.8 EN 60335-2-34 * Operational current for the second compressor time-delayed.

175 302

Height mm A B B1 B2 Suction connector Service valve Solder connector Process connector Discharge connector Compressors on a pallet location/I.D. mm location/I.D. mm location/I.D. mm location/I.D. mm pcs. C C D E 6.2 0.100

1"-14 UNF

CF.54.F2.02
Comp.\C SC10/10CL ----23.---10 1601

-5 1981

Starting relay Starting capacitor
Comp.\C SC10/10CL ----23.---10 1863

-5 2309

Start winding Winding protector
Comp.\C SC10/10CL ----23.---10 1060

-5 1168

Blue Black Brown Time delay relay Thermostat 2
Comp.\C SC10/10CL -35 3.82 -30 4.11 -25 4.43 -23.3 4.55 -20 4.79 -15 5.18 -10 5.61

-5 6.08

Safety pressure control Remove wire L-1 if time delay is used Remove wire 1-2 if thermostat 2 is used
Comp.\C SC10/10CL -35 0.69 -30 0.88 -25 1.04 -23.3 1.09 -20 1.19 -15 1.35 -10 1.51

seal ring service valve

Comp.\C SC10/10CL -35 0.80 -30 1.02 -25 1.21 -23.3 1.27 -20 1.39 -15 1.57 -10 1.76

seal ring

solder connector
Devices Starting relay Starting capacitor 80 F Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. SC10/10CL 117U6003 117U5017 103N2009 103N1004 117N0001 020-1014 118-7350 (12 mm) 104B0584 (12 mm) 118-3638

Voltage range

LBP/MBP: 198 - 254 /50 LBP: 198 - 254 /60

SC10CLX 1PH

208-230V-60Hz

8349-8

Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C

CSIR 38 F2 F2

Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm3 cm

10.13.1

g cm3 kg
Motor size LRA (rated after 4 sec. UL984) HST Cut-in current HST watt A A 385 14.8 14.8 5.0/13.7 UL984/CSA-C22.2

Height mm

104L2533
A B B1 B100 8.2 0.09 6.2 0.09 6.2 0.09 80

104L2536

8.2 0.09 6.5 0.09

CF.54.S3.02

6.5 0.09
Evap. temp in C SC10CLX, 50Hz SC10CLX, 60Hz -224 -335 -455 -23.499 -588 -738 -906 -1190

5 1430

Evap. temp in C SC10CLX, 50Hz SC10CLX, 60Hz -260 -388 -528 -23.579 -683 -857 -1054 -1389

5 1673

Evap. temp in C SC10CLX, 50Hz SC10CLX, 60Hz -304 -370 -430 -23.450 -489 -552 -623 -597
Evap. temp in C -35 SC10CLX, 50Hz 2.00 SC10CLX, 60Hz 2.19 -30 2.15 2.36 -25 2.32 2.55 -23.3 2.38 2.62 -20 2.51 2.77 -15 2.72 3.02 -10 2.94 3.30 -5 3.19 3.3.45

5 3.73

Evap. temp in C -35 SC10CLX, 50Hz 0.64 SC10CLX, 60Hz 0.74 -30 0.84 0.90 -25 1.02 1.06 -23.3 1.08 1.11 -20 1.20 1.20 -15 1.37 1.34 -10 1.55 1.45 -5 1.76 1.1.99

5 2.27

Evap. temp in C -35 SC10CLX, 50Hz 0.75 SC10CLX, 60Hz 0.85 -30 0.98 1.05 -25 1.19 1.23 -23.3 1.26 1.29 -20 1.39 1.40 -15 1.59 1.55 -10 1.81 1.69 -5 2.05 1.2.33

5 2.65

Test conditions Condensing temperature Ambient and suction gas temp. Liquid temperature 50Hz: Fan cooling F2, 220V 60Hz: Fan cooling F2, 220V
Devices Starting Relay Cover Starting capacitor 80 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d SC10CLX 117U6005 103N2008 117U5019 103N1004 118-1917 118-1918 118-1919
SC10MLX MBP Compressor R404A/R507 220-240V 50Hz & 208-230V 60Hz
Compressor Code number SC10MLX 104L2506

SC10MLX

Application Evaporating temperature range Voltage range C (F) V/Hz MBP -23.3 to 7.2 (-10 to 45) 187 - 254 /- 254 /60 Motor type Max. ambient temperature C (F) CSIR 43 (110) F2 F2 F2

6.54"(166) 2.83"(72) 2.34" (59.5)

Displacement

cu.in. (cm3)

0.37 (6.13)

4.45"(113)
4.69"(119) 5.00"(127)
Motor size LRA (rated after 4 sec.UL984) HST Cut-in current HST Resistance, main and start winding (77F) Approvals watt A A 310 30.0

8.10"(205)

3.01"(78)

2.13"

30.0 1.9/6.6 UL984/CSA-C22.2

3.68"(93.5)

Height in. (mm) A B Suction connector Process connector Discharge connector Compressors on a pallet location/I.D. in. (mm) C location/I.D. in. (mm) D location/I.D. in. (mm) E pcs. 8.00 (203) 7.76 (197)

1.38"(35)

9.92"(252) 8.03"(204) 6.70"(170)
0.320-0.327 (8.20.09) 0.252-0.259 (6.50.09) 0.252-0.259 (6.50.09) 80
5.20"(132) 4.00"(101.6) 2.76"(70)
6.50"(165) 7.32"(186)

CF.53.G1.22

4.04"(102.5)
0.75"(19) 0.63"(16) 0.38"(9.7)

2.97"(75.5)

8406-3
Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* ASHRAE MBP EN 12900
Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* ASHRAE MBP EN 12900 Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* ASHRAE MBP EN 12900

-49 -97

-49 -153 -49 -45 3.32 3.35 3.32 3.35

-40 -140

-40 -185 -40 -40 3.42 3.43 3.42 3.43

-30 -20 -34.4 -28.264

-30 -20 -34.4 -28.254 -30 -20 -34.4 -28.9 3.57 3.75 3.54 3.69 3.57 3.75 3.55 3.70
-13 --25 -23.3 -17.8 -12.2 -6.685
-13 -279 -13 -25 3.90 3.82 3.90 3.83 -10 -23.3 -17.8 -12.366 -10 -23.3 -17.8 -12.2 3.96 4.21 4.49 3.88 4.09 4.34 3.96 4.21 4.49 3.89 4.11 4.-6.-6.7 4.81 4.63 4.81 4.65

-1.1 4.1010

30 -1.-1.1 5.16 4.94 5.16 4.4.4.4 5.54 5.29 5.54 5.33

45 7.1106

Power consumption (ASHRAE, EN 12900/CECOMAF)

45 7.530

Current consumption (ASHRAE, EN 12900/CECOMAF)
45 7.2 5.74 5.48 5.74 5.52

(pos.1)

-49 -45 2.13 2.58 1.28 0.64 -40 -40 2.59 3.05 2.22 0.76 -30 -20 -34.4 -28.9 3.10 3.63 3.60 4.18 2.65 3.10 0.89 1.04 -13 -25 4.02 4.60 3.43 1.14 -10 -23.3 -17.8 -12.2 4.19 4.79 5.41 4.79 5.43 6.09 3.57 4.08 4.61 1.19 1.35 1.-6.7 6.06 6.76 5.15 1.-1.1 6.73 7.43 5.71 1.4.4 7.41 8.08 6.27 2.7.2 7.75 8.40 6.55 2.08
ASHRAE LBP ASHRAE LBP* ASHRAE MBP 130F (54.4C) 110F (43.3C) 130F (54.4C) 90F (32C) 90F (32C) 95F (35C) 90F (32C) 90F (32C) 95F (35C 90F (32C) 90F (32C) 115F (46C) Fan F2 Fan F2 Fan F2 115/60 115/60 115/60 Fig. a2 c b d dc (pos.1) b (pos.2) in.(mm) 0.63 (16) 0.75 (19) 0.63 (16) in.(mm) 0.63 (16) 0.63 (16) 0.63 (16)
EN 12900 45C (113F) 32C (90F) 32C (90F) 45C (113F) Fan F2 115/60
Devices Starting relay (Klixon incl.) Klixon Starting capacitor 280 F Cover (standard) Cord relief Cord relief for capacitor Cover (alternative) with terminal board Mounting accessories (105G1622) Bolt joint in quantities Bolt joint in quantities Snap-on in quantities Mounting accessories (105G1621) Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities NF5.5CLX 117U4061 MRP30AEN-6 117U5025 117U1021 117U0349 117U0349 117U1024

20 -6.7 930

Evap. temp inF Evap. temp inC ASHRAE LBP ASHRAE LBP* EN 12900 -40 -40 5.35 5.30 -30 -34.4 6.10 6.00 -20 -28.9 -13 -25 6.65 6.65 -10 -23.3 6.95 6.90 6.-17.-12.2

20 -6.7 9.50

-40 -40 2.50 0.66 -30 -34.4 3.26 0.84 -20 -28.9 -13 -25 4.34 1.10

-10 -23.3 4.13 4.43 1.12

0 -17.8

10 -12.2

20 -6.7 5.64
Devices Starting relay Cover Starting capacitor 240 F Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 b c d SC12CLX.2 117U6020 103N2008 117U5023 103N1004 118-1917 118-1918 118-1919
SC12MLX MBP Compressor R404A/R507 115V 60Hz
Compressor (CU-plated steel connectors) Codenumber SC12MLX 104L1606
-10 to 45 (-23.3 to 7.2) 95 - 135 /60 CSIR
= Static cooling normally sufficient = Oil cooling = Fan cooling 1.5 m/s (compressor compartment temp. equal to ambient temperature) = Fan cooling 3.0 m/s necessary
Displacement Oil quantity Maximum refrigerant charge cu.in. (cm3) fl.oz. (cm3) oz. (g) 0.78 (12.86) 20.3 (600) 45.5 (1300) 49.4 (1460) 30.2 (13.7)

2.34" (59.5)

Weight without electrical equipment

lbs. (kg)

Motor size LRA (rated after 4 sec.UL984) HST Cut-in current HST watt A A 53 0.7/2.9 UL984/CSA-C22.2
Height in. (mm) A B B1 B2 Suction connector Process connector Discharge connector Compressors on a pallet 8.62 (219) 8.39 (213) 7.60 (193) 4.33 (110)
10.43"(265) 8.03"(204) 7.01"(178) 6.69"(170)
location/I.D. in. (mm) D 0.252-0.259 (6.50.09) location/I.D. in. (mm) E pcs. 0.252-0.259 (6.50.09) 60

May 2002

CJ.54.J1.22
location/I.D. in. (mm) C 0.320-0.327 (8.20.09)
Free gas vol. in compressor housing fl.oz. (cm3)

2.17"(55)

8459-7
Evap. temp in F Evap. temp in C ASHRAE MBP EN 12900 -10 -23.667

0 -17.-12.-6.-1.4.7.2337

Evap. temp in F Evap. temp in C ASHRAE MBP EN 12900 -10 -23.-17.-12.-6.-1.4.982

45 7.1017

c a2 b a2 Start winding Main winding

R S 4 5

Evap. temp in F Evap. temp in C ASHRAE MBP EN 12900 -10 -23.3 7.93 7.-17.8 8.50 8.-12.2 9.13 8.-6.7 9.83 9.-1.1 10.58 10.4.4 11.39 10.5 11.48 10.81

45 7.2 11.82 11.10

Evap. temp in F Evap. temp in C ASHRAE MBP EN 12900 -10 -23.3 3.42 1.13
0 -17.8 3.90 1.-12.2 4.46 1.-6.7 5.08 1.-1.1 5.76 1.4.4 6.49 2.5 6.57 2.7.2 6.88 2.30
Test conditions Condensing temperature Suction gas temperature Ambient temperature Liquid temperature Cooling V/Hz
ASHRAE MBP 130F (54.4C) 95F (35C) 90F (32C) 115F (46C) Fan F2 115/60
Devices Starting relay Starting capacitor 410 F Cover Protector Protector holder Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 c b f h in. (mm) 5 /8 (16) 5 /8 (16) 5 /8 (16) parts of compressor SC12MLX 117-7441 117U5028 (117U1021) (117U3212) (117U0438) 118-1917 118-1918 118-1919
SC15CLX.2 LBP Compressor R404A/R507 115V 60Hz
Compressor (CU-plated steel connectors) Codenumber SC15CLX.2 104L1853

SC15CLX.2

SC15CLX.2 115V-60Hz 1PH
Displacement Oil quantity Maximum refrigerant charge cu.in. (cm3) fl.oz. (cm3) oz. (g) 0.93 (15.28) 18.6 (550) 45.5 (1300) 49.4 (1460)

30.2 (13.7)

location/I.D. in. (mm) C 0.387-0.385 (9.70.09) location/I.D. in. (mm) D 0.252-0.259 (6.50.09)

CJ.54.I1.22

location/I.D. in. (mm) E

8464-2

Evap. temp in F Evap. temp in C ASHRAE LBP ASHRAE LBP* EN 12900 -40 -783 175
-30 -34.-20 -28.-13 --10 -23.0 -17.10 -12.20 -6.6364 1604
Evap. temp in F Evap. temp in C ASHRAE LBP ASHRAE LBP* EN 12900 -40 --30 -34.-20 -28.-13 --10 -23.0 -17.10 -12.890 898

20 -6.983 991

Evap. temp in F Evap. temp in C ASHRAE LBP ASHRAE LBP* EN 12900 -40 -40 6.70 7.03 7.00 -30 -34.4 7.40 7.62 7.61 -20 -28.9 8.13 8.23 8.24 -13 -25 8.65 8.67 8.69 -10 -23.3 8.87 8.86 8.-17.8 9.64 9.51 9.-12.2 10.42 10.18 10.24
20 -6.7 11.23 10.87 10.95
Evap. temp in F Evap. temp in C ASHRAE LBP ASHRAE LBP* EN 12900
-40 -40 0.25 2.20 0.51 -30 -34.4 2.31 3.22 0.79 -20 -28.9 3.33 4.01 0.99 -13 -25 3.90 4.52 1.12 -10 -23.3 4.12 4.73 1.-17.8 4.81 5.40 1.-12.2 5.44 5.99 1.-6.7 6.00 6.48 1.62
Devices Starting relay Starting capacitor 410 F Cover Protector Protector holder Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities Fig. a2 c b f h in. (mm) 5 /8 (16) 5 /8 (16) 5 /8 (16) parts of compressor SC15CLX.2 117-7441 117U5028 (117U1021) (117U3212) (117U0438) 118-1917 118-1918 118-1919
SC15MLX MBP Compressor R404A/R507 115V 60Hz
Compressor (CU-plated steel connectors) Codenumber SC15MLX 104L1805

SC15MLX

Application Evaporating temperature range Voltage range F (C) V/Hz MBP -10 to 45 (-23.3 to 7.2) CSR: 95 - 135 /60 CSIR: 103 - 135 /60 Motor type Max. ambient temperature Comp. cooling at max. ambient temperature 110F (43C) F2

15 3.65

EN 12900/CECOMAF 45C 32C no subcooling
SC12DL MBP/HBP Compressor R407C 220-240V 50Hz
Data Sheet (Replaces CF.54.W1.02) General
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm 3 cm3 g cm3 kg 12.13.6

CF.54.W2.02

Comp.\C SC12DL ---7.10 2031

15 2456

Comp.\C SC12DL ---7.10 2182

15 2642

Comp.\C SC12DL ---7.10 675

15 700

Comp.\C SC12DL -15 3.11 -10 3.31 -5 3.3.3.79 7.2 3.3.91

15 4.01

Comp.\C SC12DL -15 1.39 -10 1.62 -5 1.2.2.58 7.2 2.3.01

15 3.51

Comp.\C SC12DL -15 1.48 -10 1.74 -5 2.2.2.77 7.2 2.3.23

15 3.77

SC15DL MBP/HBP Compressor R407C 220-240V 50Hz
Data Sheet (Replaces CF.54.X1.02) General
Application Evaporating temperature range Voltage range Motor type Max. ambient temperature Comp. cooling at ambient temp. C 32C 38C C V/Hz MBP/HBP -15 to - 254 /50 CSR 38 F2 F2
Displacement Oil quantity Maximum refrigerant charge Free gas vol. in compressor Weight without electrical equipment cm 3 cm3 g cm3 kg 15.13.5
21.8 3.5/12.2 EN 60 335-2-34

CF.54.X2.02

Comp.\C SC15DL ---7.10 2483

15 3014

Comp.\C SC15DL ---7.10 2668

15 3241

Comp.\C SC15DL ---7.10 761

15 790

Comp.\C SC15DL -15 2.84 -10 3.08 -5 3.3.3.67 7.2 3.3.82

15 3.94

Comp.\C SC15DL -15 1.45 -10 1.71 -5 2.2.2.79 7.2 2.3.26

15 3.82

Comp.\C SC15DL -15 1.56 -10 1.84 -5 2.2.2.99 7.2 3.3.51

15 4.10

Devices Starting device a3 Cover Starting relay Starting capacitor 80 F Run capacitor Cord relief Mounting accessories Bolt joint for one compressor Bolt joint in quantities Snap-on in quantities b a2 c e d Fig. SC15DL 117-7028 (470 mm cable length) 117-7029 (550 mm cable length) 117-7032 (650 mm cable length) 103N2009 Components of starting device 103N1004 118-1917 118-1918 118-1919
SC10/10DL MBP/HBP Twin Compressor R407C 220-240V 50Hz
Data Sheet (Replaces CF.54.Y1.02) General

CF.54.Y2.02

Comp.\C SC10/10DL ---7.10 3176

15 3855

Comp.\C -15 SC10/10DL 1030 --7.10 3412

15 4146

Comp.\C SC10/10DL ---7.10 1081

15 1135

Comp.\C SC10/10DL -15 5.00 -10 5.32 -5 5.5.6.16 7.2 6.6.40

15 6.63

Comp.\C SC10/10DL -15 1.39 -10 1.61 -5 1.2.2.54 7.2 2.2.94
Comp.\C SC10/10DL -15 1.49 -10 1.73 -5 2.2.2.72 7.2 2.3.16
Devices Starting relay Starting capacitor 80 F Cover Cord relief Time-delay relay Check valve (to be used with time-delay relay) Service valve pcs. 1 SC10/10DL 117U6005 117U5017 103N2009 103N1004 117N0001 020-1014 118-7350 (12 mm) 104B0584 (12 mm) 118-3638