Operation Manual Mode d'emploi Gebruiksaanwijzing Bedienungsanleitung Manual de instrucciones Manual do utilizador

EN FR NL DU ES PT

WWW.BEGLEC.COM
Copyright 2007 by BEGLEC cva.
Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.

Version: 1.0

EN - DISPOSAL OF THE DEVICE
Dispose of the unit and used batteries in an environment friendly manner according to your country regulations.

FR - DCLASSER LAPPAREIL

Dbarrassez-vous de lappareil et des piles usages de manire cologique Conformment aux dispositions lgales de votre pays.
NL - VERWIJDEREN VAN HET APPARAAT
Verwijder het toestel en de gebruikte batterijen op een milieuvriendelijke manier conform de in uw land geldende voorschriften.
DU - ENTSORGUNG DES GERTS
Entsorgen Sie das Gert und die Batterien auf umweltfreundliche Art und Weise gem den Vorschriften Ihres Landes.
ES - DESHACERSE DEL APARATO
Reciclar el aparato y pilas usadas de forma ecologica conforme a las disposiciones legales de su pais.
PT - COMO DESFAZER-SE DA UNIDADE
Tente reciclar a unidade e as pilhas usadas respeitando o ambiente e em conformidade com as normas vigentes no seu pas.

ENGLISH

OPERATION MANUAL
Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these operating instructions very carefully.

FEATURES

This unit is radio-interference suppressed. This appliance meets the requirements of the current European and national guidelines. Conformity has been established and the relevant statements and documents have been deposited by the manufacturer. 2-way stereo or 3-way mono crossover Full scale frequency selection between 45 to 9600Hz 24dB/oct. Linkwitz - Riley filters All inputs and outputs are balanced or unbalanced with XLR connections Subsonic filter (40Hz) with ON/OFF switch Gain control on all inputs and outputs Phase inverter switch

BEFORE USE

Before you start using this unit, please check if theres no transportation damage. Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual. To protect the environment, please try to recycle the packing material as much as possible. Check the contents: Check that the carton contains the following items: User manual Power Cable EC102/XO210 unit
To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages. This unit is for indoor use only. Dont place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit, immediately disconnect the mains power. No naked flame sources, such as lighted candles, should be placed on the appliance. Dont cover any ventilation openings as this may result in overheating. Prevent use in dusty environments and clean the unit regularly. Keep the unit away from children. Inexperienced persons should not operate this device. Maximum save ambient temperature is 45C. Dont use this unit at higher ambient temperatures. Always unplug the unit when it is not used for a longer time or before you start servicing. The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. Check that the available voltage is not higher than the one stated on the rear panel of the unit. The socket inlet shall remain operable for disconnection from the mains. The power cord should always be in perfect condition. Switch the unit immediately off when the power cord is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Never let the power-cord come into contact with other cables! When the power switch is in OFF position, this unit is not completely disconnected from the mains! This appliance must be earthed to in order comply with safety regulations. In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user serviceable parts inside. Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type and electrical specifications! In the event of serious operating problems, stop using the appliance and contact your dealer immediately. Please use the original packing when the device is to be transported. Due to safety reasons it is prohibited to make unauthorized modifications to the unit. INSTALLATION GUIDELINES: Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity. Placing and using the unit for long periods near heat-generating sources such as amplifiers, spotlights, etc. will affect its performance and may even damage the unit. The unit can be mounted in 19-inch racks. Attach the unit using the 4 screw holes on the front panel. Be sure to use screws of the appropriate size. (screws not provided) Take care to minimize shocks and vibrations during transport. When installed in a booth or flight case, please make sure to have good ventilation to improve heat evacuation of the unit. To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance. CLEANING THE APPLIANCE: Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not use volatile liquids such as benzene or thinner which will damage the unit.

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove the top cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

CAUTION

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. This symbol means: indoor use only. This symbol means: Read instructions.

JB SYSTEMS

EC102/XO210

CONNECTIONS

Use good quality cables to prevent bad audio quality. For more information on connections, please refer to the next chapter and the picture below. Be sure to turn off the equipment before you make changes to the different connections. In this manual we talk about line inputs. This is a global name for inputs with a level between 750mV and 2V. This includes tuners, videos, CD-players, etc.
5. LOW/MID Output: Controls the: In Stereo mode: LOW frequency output level from - to +6dB ( both channels ) In Mono mode: LOW frequency output level from - to +6dB on Channel 1 MID frequency output level from - to +6dB on Channel 2 6. LOW/MID Phase Invert Switch: Switch for inversing the polarity. A LED indicates your selection: In Stereo mode: you can inverse the polarity on the LOW output In Mono mode: you can inverse the polarity on the LOW output on Channel 1 you can inverse the polarity on the MID output on Channel 2 Remark: Use this switch with care. This switch is most effective on the low frequencies: switch the inverter on/off while listening to the music. Choose the position with the most bass reproduction 7. HIGH Output: controls the HIGH frequency output level from - to +6dB. When you work in Mono mode, you can only use the Channel 2 knob. 8. HIGH Phase Invert Switch: Switch for inversing the polarity on the HIGH output. A LED indicates your selection. When you work in Mono mode, you can only use the switch on Channel 2. Remark: In most cases you dont need to use this switch. When the setting is wrong, it can bring you more bad then good 9. MONO/STEREO LED: This LED indicates if you are working in MONO or STEREO Mode: MONO Mode: Both channels work together to obtain a 3-way mode crossover STEREO Mode: Both channels work independently to obtain an 2x2-way crossover 10. Power Switch: Switch for turning the unit ON/OFF

FUNCTIONS (rear)

FUNCTIONS (FRONT)
1. Input Gain: Controls the INPUT level with +/- 12dB. 2. Low Cut Switch: Push this button to select the 40 Hz high pass filter. Use this filter to protect your speakers and amplifier from unwanted subfrequencies that only consume power but dont necessarily add more punch 3. Crossover Point selection: Selects the crossover point between: In Stereo mode: LOW and HIGH frequencies In Mono mode: LOW and MID frequencies on the Channel 1 MID and HIGH frequencies on the Channel 2 4. X10 LED: X10 LED off: you can control the x-over frequency from 45Hz to 960Hz X10 LED on: you can control the x-over frequency from 450Hz to 9.6kHz
11. Mains Input: with IEC socket and integrated fuse holder, connect the supplied mains cable here 12. Ground Lift Switch: In some cases nasty hum noises can occur due to ground loops in your setup. Setting the Ground Lift Switch to the position lift breaks the ground loop between the EC102/XO210 and the chassis grounds of various other components in your setup. As a result the hum noises will disappear. 13. XLR Inputs: Balanced inputs using XLR cables. When you work in Mono Mode, you only have to connect an XLR cable on Channel one 14. LOW/MID XLR Output: Balanced outputs using XLR cables: In Stereo Mode: When you work in Normal mode ( see number 17 for more information ), you have to connect an XLR cable to Channels 1 and 2. When you work in Summed mode, you only have to connect an XLR cable to Channel 1. In Mono Mode: Channel 1 operates the LOW output. Channel 2 operates the MID output. 15. HIGH XLR Output: Balanced outputs using XLR cables: In Stereo Mode: You have to connect an XLR cable to both channels In Mono Mode: Only Channel 2 is used 16. MONO/STEREO Switch: With this switch, you can choose between MONO 3-way or STEREO 2x2-way Mode 17. LF SUM Switch: With this switch, you can choose if you want your LOW frequencies in normal mode ( 2 outputs ), or summed ( uses only channel 1 output ) ( see number 14 for more information ). In summed mode the low frequency from Channels 1&2 are put together so you dont have to use a splitter cable in case you have only 1 subwoofer.

FRANCAIS

MODE DEMPLOI
18. Crossover Frequency Switch: With this switch, you can choose between x1/x10 frequency range ( see number 4 for more information )

310/244/54 303

JB SYSTEMS GHOST RELOOP GLORIOUS RELOOP RELOOP RELOOP FANE FANE FANE FANE FANE FANE FANE JB SYSTEMS SYNQ PHONIC PHONIC PHONIC PHONIC PHONIC PHONIC PHONIC FAL FAL ORPHEE ORPHEE ORPHEE ORPHEE SYNQ SYNQ BRITEQ RELOOP VESTAX JB SYSTEMS ASD GLORIOUS MAC MAH MAC MAH GHOST JB SYSTEMS MAC MAH FANE ZENSATION JB SYSTEMS RELOOP

188/189

RELOOP JB SYSTEMS RELOOP JB SYSTEMS FAL FAL JB SYSTEMS JB SYSTEMS JB SYSTEMS JB SYSTEMS JB SYSTEMS JB SYSTEMS MAC MAH JB SYSTEMS FANE FANE FANE ASD ASD MAC MAH VESTAX RELOOP GHOST GHOST FAL MAC MAH VESTAX GHOST GHOST JB SYSTEMS JB SYSTEMS JB SYSTEMS MAC MAH JB SYSTEMS GHOST GHOST ORPHEE ORPHEE MAC MAH MAC MAH JB SYSTEMS GHOST FAL GHOST ASD RELOOP BRITEQ BRITEQ BRITEQ BRITEQ BRITEQ MAC MAH MAC MAH
MAC MAH JB SYSTEMS RELOOP VESTAX

JB SYSTEMS ASD FANE FANE

122 122
DX404 DX626A DYN2000 DYNAMO250 EASYMIC100 EC102 EFFECT COMMANDER ELINK48 EM30 EM310S EM50 EP1 EQ15PRO EQ30PRO EXERCET EXPRESS LIGHT EXPRESS V2 F80Z FALCON FASHION LASER FC-5 FH SSTI FH170 FH285 FH290 FH305 FH400 FILTRE PASSIF FIOLE DE PARFUM FIRE 120 FIRE 250 FIREFLY FIREFLY302 PLUS FIREFLY302 USB FIREFLY808 UNIVERSAL FL01CX FL1800/D FLASH ROPE FLEX1200 FLEX600II FLEX800 FLEXI LED FLEXI TWIN LED FLEXIBLE LUMINEUX FLOWER LED 2 FOG S1200 FOG S1500DMX FOG1500 FOG1500TI FOG3000 FOG400 FOG800 FPT150 FPT50 FPT80 FX1000 FX1700 GB688 GB689 GEQ1500
LITE-PUTER LITE-PUTER PHONIC JB SYSTEMS MAC MAH JB SYSTEMS JB SYSTEMS ORPHEE MAC MAH MAC MAH MAC MAH VESTAX RELOOP RELOOP JB SYSTEMS MAC MAH MAC MAH ANTARI JB SYSTEMS GHOST JB SYSTEMS FANE FANE FANE FANE FANE FANE MAC MAH MAC MAH GHOST GHOST GHOST PHONIC PHONIC PHONIC MAC MAH JB SYSTEMS JB SYSTEMS MAC MAH MAC MAH MAC MAH JB SYSTEMS GHOST

171 171

GEQ3100 GM12B GOBO BOOSTER GOBO SWEEPER GOBOFLOWER GREEN30 GUIRLANDE 45M GYROPHARES HA210B HALO600 HANDYTRAX USB HAZE 600 HELIOS HELIX BOARD12 FIREWIRE MKII HELIX BOARD12 PLUS V9 HELIX BOARD12 UNIVERSAL V9 HELIX BOARD18 FIREWIRE MKII V9 HELIX BOARD18 UNIVERSAL HELIX BOARD24 FIREWIRE MKII v9 HELIX BOARD24 UNIVERSAL HEXALED HP1500 PRO HP2000 PRO HPS2 HPS3 HS1 HZ400 HZ500 I7100 I7300 I7600 IA231F ICOLOR4 ICON AMPLI ICUBE12A ICUBE1405 ICUBE15A ICUBE15SUB ICUBE15SUBA ICUBE2005 ICUBE305 ICUBE505 ICUBE605 ICUBE805 ILEAD IMOVE 5S/HID IMPACT 12.4X V9 IMPACT 16.4X V9 IMPACT 24.4X V9 IMPACT 8.4X V9 IMPRESSION SERIE INFERNO INSPACE INTERFACE STAND INTERFACE TRAY IPHONO IQ2+ IROCK 7B IROCK 7S ISX10
PHONIC MAC MAH FAL JB SYSTEMS JB SYSTEMS GHOST MAC MAH GHOST RELOOP FAL VESTAX MAC MAH JB SYSTEMS PHONIC PHONIC PHONIC PHONIC PHONIC PHONIC PHONIC GHOST JB SYSTEMS JB SYSTEMS SYNQ SYNQ VESTAX ANTARI ANTARI PHONIC PHONIC PHONIC PHONIC JB SYSTEMS PHONIC MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH JB SYSTEMS JB SYSTEMS PHONIC PHONIC PHONIC PHONIC PHONIC JB SYSTEMS GLORIOUS RELOOP RELOOP RELOOP RELOOP JB SYSTEMS JB SYSTEMS JB SYSTEMS

RACK TYPE SKB RECORD BAG RECORD BOX RECORD CLEANER MK2 REGIE MIX REGLETTE FLUO RGBLED RH2350 PROMK2 RH2450 PROMK2 RH3500 PRO LTD RH3500PRO MK2 RHM-10 RHP10 RHP10 LTD RIBALTA RK100 RMP1 RMP1660B RMP2 RMP2660B RMP2760B RMP3 RMX20 BLACKFIRE RMX30 BLACKFIRE RMX40DSP RMX40USB ROADGEAR 160 PLUS ROADGEAR 260 PLUS V1 ROX 12USX ROX 5 USB ROX 6 USB ROX 8 USX RP1000 MK3 RP2000 MK3 RP4000 M3D RP6000 MK6 RS15 RS212 RS215 RS218 S1 TUBE DE COUPLAGE S1500D S3000D SA120 SA35 SA75/SA75D SCANLED SCARAB LASER SCENE 1000 SCENE 500 SE100 SE206/207 SE700 SERIE SEM700 SERIE SEP206/207 SET PAR LED SHAPE 600 SHAPE PRO1000 SHAPE PRO2000
MAC MAH RELOOP GLORIOUS RELOOP RELOOP MHD GHOST RELOOP RELOOP RELOOP RELOOP RELOOP RELOOP RELOOP JB SYSTEMS VESTAX RELOOP RELOOP RELOOP RELOOP RELOOP RELOOP RELOOP RELOOP RELOOP RELOOP PHONIC PHONIC SINN7 SINN7 SINN7 SINN7 RELOOP RELOOP RELOOP RELOOP SYNQ SYNQ SYNQ SYNQ PHONIC MAC MAH MAC MAH PHONIC PHONIC PHONIC GHOST JB SYSTEMS FAL FAL JB SYSTEMS PHONIC PHONIC PHONIC PHONIC MAC MAH FAL FAL FAL

175 50/38 38/217

SIX LIGHT SK1 SK2 SLEEVE SLEEVE SLIPMAT SLX AMPLI SM1612 SMART MOON SMP1 SMX1 SMX3 SNAP FASTENER SNOW 1200 DMX SNOW 600 SOLAR RGB SOLAR WHITE SONIC STATION 16 V9 SONIC STATION 22 V9 SONIC STATION 32 V9 SOVEREIGN SERIE SP AMPLI SPARK250 SPARK575 SPIN 2+ SPIN! SPINNE1 ST150 ST250 ST290 STAGE 24 STAGE 48 STAGE PAINTER 12 STAGELED STAND 19" MK2 STAND DJ-ST STORMBIRD STUDIO 12L STUDIO 5FR STUDIO 5M STUDIO FOAM STUDIO WIZARD STYLUS CLEANER SUMMIT SUNDANCE SUNLED SUNLITE SUPERWINNER SWING LED II SZ290 T2 T3 TALENT TANK C100 TAURUS THE ROVER THE WINNER II THUNDERBIRD TM5600B
JB SYSTEMS PHONIC PHONIC JAYTEC VESTAX
MAC MAH JB SYSTEMS JB SYSTEMS RELOOP SYNQ SYNQ RELOOP MAC MAH MAC MAH JB SYSTEMS JB SYSTEMS PHONIC PHONIC PHONIC FANE MAC MAH FAL FAL RELOOP RELOOP SINN7 MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH BRITEQ GHOST GHOST DJ TECH JB SYSTEMS FANE FANE FANE SINN7 PHONIC RELOOP PHONIC GHOST GHOST SUNLITE JB SYSTEMS MAC MAH ASD JB SYSTEMS JB SYSTEMS JB SYSTEMS MAC MAH JB SYSTEMS JB SYSTEMS JB SYSTEMS JB SYSTEMS MAC MAH

123 106/270 163

TOLERIE TOMAHAWK TORCHLIGHT TR1 TRINITY TRINITY MX TRINITY XTREM TS15M TSX10 TSX12 TSX15 TUBELIGHT TWIN EFFECT LASER TWINLED U1 MAC MAH U520M U800AG UCUBE EXPRESS UCUBE-50 UCUBE-80 UM30 UM31 UM40 UM41 UM50 UM51 USB AUDIO CONVERTER USB900 UV400 UVLED VAI80 VALISE CASE VCI100 VCI300 VCM100 VCM600 VDA1000 VERSATAP 30/50 VFX1 VIBE 15S MKII VIBE12 MKII VIBE15 MKII VIBE18S MKII VIBE30 MKII VM85 MICRO FILAIRE VMC002XLU VMC004FXU VMC004XLU VOLTA CTC VOLTA RGB VOYAGE80/20 VP-P37,5 VX AMPLI VZX AMPLI W20/25/30/38 WATERWAVE II WD51AX WD51X WD828AX
JB SYSTEMS GHOST VESTAX MAC MAH MAC MAH MAC MAH MAC MAH JB SYSTEMS JB SYSTEMS JB SYSTEMS MHD JB SYSTEMS MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH PHONIC PHONIC PHONIC PHONIC PHONIC PHONIC JB SYSTEMS JB SYSTEMS MAC MAH GHOST VESTAX

18 172/173

WD828X WD868 WD868A WD878 WD878A WIDER PANEL WM-SYS1 WM-SYS2 WM-SYS3 WM-SYS4 WM40-L WM40-R WM400-L WM400-R WM60 WM70 WORKBENCH WORLD STAR XO210 XP AMPLI XTREM 1 Z1020 II Z1200II Z1500II Z3000II Z300II ZENIT 5 ZENIT 8 ZX2 ZX4
MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH MAC MAH PHONIC PHONIC PHONIC PHONIC PHONIC PHONIC PHONIC PHONIC PHONIC PHONIC GLORIOUS JB SYSTEMS JB SYSTEMS PHONIC SYNQ ANTARI ANTARI ANTARI ANTARI ANTARI SINN7 SINN7 PHONIC PHONIC

148 148

VESTAX VESTAX VESTAX VESTAX VESTAX PHONIC VESTAX JB SYSTEMS JB SYSTEMS JB SYSTEMS JB SYSTEMS JB SYSTEMS PHONIC VESTAX VESTAX VESTAX FAL FAL MAC MAH BRITEQ JB SYSTEMS MAC MAH MAC MAH JB SYSTEMS MAC MAH MAC MAH MAC MAH
Pour toute autre rfrence qui ne serait pas rpertorie dans le catalogue, merci de bien vouloir nous contacter.

WWW.DENON.DJ

DN-S3700 : the art of sound
Allowing your performance to breathe and flow with the music, the DN-S3700 is crafted from the Japanese traditions of balance and sensitivity. Responding to your touch and your imagination, it captures the spirit of the turntablists art, letting you explore new creative possibilities for your journey in the art of sound.
9 Platter design with high torque direct drive motor 7 Built in DSP Effects including DENONs exclusive Echo Loop USB device connection MIDI control capability

USE IT. LIVE IT.