ENDUSER PRICELIST

BEGLEC CommVA

MARCH 2009 BGL2
SALES DEPARTEMENT: TEL 02/481.70.75 FAX: 02/481.70.76 TECHNICAL DEPARTMENT: TEL: 02/ 481.70.80 This pricelist replaces any prior. Beglec reserves the rights to make any price-changes. Market Value (MRK.VAL) is VAT and Recupel included N = NEW ARTICLE
TRANSPORTKOSTEN: 10,00 ten laste van de klant voor bestellingen onder 125,00 netto FRAIS DE TRANSPORT: 10,00 votre charge pour commandes de moins de 125,00 net.

March 2009

TYPE & DESCRIPTION

RECUPEL

MIXERS
JB SYSTEMS: Mixers with USB-connection + Beat 6 - USB (19", 6ch, beatcounter, 2 masters, balanced out) MX 3 - USB (3 channel mixer) JB SYSTEMS: MX & BEAT SERIES + MX - 100 (5 inputs; 2 ch + mic.; 1 master) MX 4 Mk2 (11 inputs; 4 ch; 2 masters; balanced output) Beat 4 Mk2(11 in; 4 ch; beatcounter; 2 masters; balanced out) Beat 6 Mk2( 19"; 6ch; beatcounter; 2masters; balanced out) JB SYSTEMS: STANDARD SERIES Compact (5 inputs; 2ch + mic 1 master) Control 5.2 (11 inputs; 5 ch; 2 zones) Talent (11 inputs; 6 ch; 2 masters) PRO 16X (5 channel) ME 2 (11inputs; 5 ch +digital echo) MX 870 micromixer 6ch; 1 master JB SYSTEMS: PA MIXERS PMD-8 Powered Mixer (Digital ef) 8 channels 2x350W PMD-12 Powered Mixer (Digital ef) 12 channels 2x350W MM-10 stage mixer 6 mono + 2 stereo channels MM-14D PA-mixer (6 mono + 4 stereo channels) JB SYSTEMS: MIXER-ACCESSORIES BNC-Light / Standard XLR-Light / Standard MINILIGHT / Standard (with transformer) Twinracklight 19" / Standard BNC-Light / LED XLR-Light / LED Minilight / LED (with transformer) Twinracklight 19" / LED 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 11,00 11,00 31,00 43,00 28,00 28,00 39,50 74,00 0,36 0,36 0,36 0,36 459,00 529,00 199,00 339,00 0,10 0,36 0,36 0,10 0,10 0,36 79,00 179,00 199,00 69,00 114,00 89,00 0,10 0,36 0,36 0,36 89,00 179,00 199,00 229,00 0,36 0,36 0,36 299,00 269,00 139,00 N Beat 4 - USB (4 channels, 13 inputs)

Page: 1/25

SYNQ : MIXERS SMX-1 : 19" Mixer with DSP effects SMX-3 : Mixer with DSP effects, Sampler,. Set 19" Adaptors for SMX-3 SD-Card 512 MB High Speed Memory Corp (for SMX-2) 0,36 0,36 429,00 559,00 24,00 7,90

AMPLIFIERS

JB SYSTEMS: POWER-AMPLIFIERS AX-400 2x200W RMS 4 Ohm / 2x135W RMS 8 Ohm AX-700 2x350W RMS 4 Ohm / 2x200W RMS 8 Ohm VX-200 2x110W RMS 4 Ohm / 2x65W RMS 8 Ohm VX-400 2x200W RMS 4 Ohm / 2x135W RMS 8 Ohm VX-700 2x350W RMS 4 Ohm / 2x200W RMS 8 Ohm D2-900 2x450W RMS 4 Ohm / 2x300W RMS 8 Ohm D2-1200 2x600W RMS 4 Ohm / 2x400W RMS 8 Ohm D2-1500 2x750W RMS 4 Ohm / 2x500W RMS 8 Ohm C3-1800 2x450W RMS 4 Ohm + Sub 900W RMS 4 Ohm SYNQ : POWER-AMPLIFIERS PE-900 2x450W RMS 4 Ohm / 2x300W RMS 8 Ohm PE-1500 2x750W RMS 4 Ohm / 2x500W RMS 8 Ohm PE-2400 2x1200W RMS 4 Ohm / 2x800W RMS 8 Ohm N DIGIT 1K0 (Digital Amp 2x 500 W RMS 4 Ohm) DIGIT 2K2 (Digital Amp 2x 1100 W RMS 4 Ohm) DIGIT 3K6 (Digital Amp 2x 1800 W RMS 4 Ohm) 0,36 0,36 0,36 0,36 0,36 0,36 439,00 599,00 739,00 395,00 579,00 669,00 0,36 0,36 0,36 0,36 0,36 0,36 0,36 0,36 0,36 209,00 279,00 189,00 209,00 279,00 419,00 469,00 519,00 589,00
TURNTABLES, CD- PLAYERS & CARTRIDGES
SYNQ AUDIO RESEARCH : TURNTABLES X-TRM 1 without cartridge SYNQ AUDIO RESEARCH : CD-PLAYERS CDX-2 Double CD & MP-3-player SYNQ AUDIO : MULTIMEDIA CONTROLLER PCM-1 Multimedia Controller JB SYSTEMS : TURNTABLES High Q 10 Silver belt drive High Q 30 D mkII direct drive T-2 Direct Drive T-3 High Torque Direct Drive 0,36 0,36 0,36 0,36 129,00 229,00 179,00 229,00 0,36 349,00 0,36 449,00 0,36 349,00

Page: 2/25

JB SYSTEMS: TURNTABLE-ACCESSORIES set slipmats JB Systems ( 2 pcs) set slipmats Synq Audio Research ( 2 pcs) JB SYSTEMS: CD PLAYERS CD570 Black double CD-player + Supertwist display CD570 Silver double CD-player + Supertwist display JB SYSTEMS: MP3 & CD PLAYERS MCD 150 Table Top CD & MP3 player MCD 200 Table Top MP3 & CD-player MCD 300 Single MP3 & CD-player N MPT-200 Double MP-3 & CD-player JB SYSTEMS: SD-CARD PLAYERS USB 900 Double USB / SD-Card player SD-Card 4 GB High Speed Memory Corp (for MSD 900) STANTON: NEW SERIES Trackmaster.V3 (+ 2 extra styli) Skratchmaster.V3 (+ 1 extra stylus) 505.V3 cartridge 500.V3 cartridge T-3 replacement stylus for Track- and Skratchmaster N 505 replacement stylus for 505.V3 and 505 SK II N 500 replacement stylus for 500.V3 and 500 AL II Cartridge HQ10 / HQ 30D / T-2 / T-3 113,00 87,00 51,00 45,50 40,50 24,50 20,00 16,50 0,36 379,00 24,90 0,36 0,36 0,36 0,36 169,00 279,00 219,00 339,00 0,36 0,36 219,00 219,00 6,90 6,90

Page: 4/25

AUDIO SPECIALITIES
SYNQ AUDIO : SOUND PROCESSORS N DLP-6 Digital Loudspeaker Processor N DFX-48 Digital Effects Processor N DLC-1 Digital Limiter Compressor JB SYSTEMS: USB CONVERTOR USB-Audio Convertor (bi-directional, phono/line to USB) JB SYSTEMS: ECHOCHAMBERS DE 600 Digital with 4 channel mixer JB SYSTEMS: EQUALISERS EQ 215 2x15 band stereo equaliser JB SYSTEMS: ELECTRONIC X-OVERS XO210 / Black: 2-way stereo / 3-way mono EC102 / Silver: 2-way stereo, 3-way mono JB SYSTEMS : SOUND PROCESSORS SE-100 Sound Enhancer (with sub out) 0,36 95,00 0,36 0,36 90,00 90,00 0,36 89,00 0,36 97,00 39,50 0,36 0,36 0,36 690,00 195,00 219,00
MICROPHONES & HEADPHONES
JB SYSTEMS: MICROPHONES JB 3 RED: dynamic micro without XLR JB 5 cardioid dynamic micro without XLR JB 10 cardioid dynamic mic with XLR JB 17 cardioid dynamic mic with XLR JB 27 moving coil dynamic mic with XLR JB 30: dynamic mic gooseneck (flexible) with XLR HM-06/PS HEADSET with power supply JB 33: Electret mic. with tablestand JB SYSTEMS: WIRELESS MICROPHONES (RTT approved) MR-SU9 + UF 16 UHF Wireless Handmic MR-SU9 + UT 16 UHF Wireless Bodypack HM U 36 Headset for UT-16 with mini- XLR MR - S 06 + MX - V30 Wireless Handmic UF16: extra UHF Handmicro 16CH UT16: extra UHF Beltpack 16CH 19" Adapter for 9,5" /1U: Set 19" adapt. F. wireless micro JB SYSTEMS: PARTS & ACCESSORIES JB70:PVC mic holder without JB75 JB71:PVC mic holder without JB75 JB75 Metal Reduction (Set of 10 pcs) 4,20 4,90 6,80 0,36 0,36 0,36 0,36 0,36 199,00 199,00 31,50 109,00 83,00 83,00 12,50 0,10 0,10 0,36 0,36 0,36 0,36 0,10 0,10 11,50 18,00 38,50 43,50 49,00 37,00 35,00 39,00

Page: 5/25

WINDSCREEN MICRO (5pcs 5 colors) WINDSCREEN MICRO (5pcs - black) JB85:Flexible 50cm JB88:Flexible base JB SYSTEMS: HEADPHONES HP-1500 PRO stereo headphone HP-2000 PRO stereo headphone SYNQ AUDIO RESEARCH: HEADPHONES HPS-2 PRO stereo headphone HPS-3 PRO Single Ear headphone

4,50 4,50 7,90 3,90

0,10 0,10

22,00 33,50

59,00 24,50

SPEAKERS + CABINET PARTS

JB SYSTEMS: PRO SPEAKERS PW 12/200 woofer 30cm 200 Watt RMS PW 15/300 woofer 38cm 300 Watt RMS PW 18/500 woofer 46cm 500 Watt RMS JB SYSTEMS: SPEAKERS SP10/150 woofer 26cm 150W / 8 Ohm SP12/200 woofer 30cm 200W / 8 Ohm SP15/250 Woofer 38cm 250W / 8 Ohm JB SYSTEMS: TWEETERS JB 330: 3" square Piezo Tweeter JB 550: 3"x6" Piezo Tweeter JB 660 : Dual Piezo Tweeter JB 665: Horn tweeter 6KHz - 16KHz HT-30 Titanium Bullet Tweeter HT-100 1,5" Titanium Bullet Tweeter PT-34 1,5" Titanium Driver (60W RMS) PT-44 1,75" Titanium Driver (80W RMS) PH-1 Fiberglass Horn for PT34/PT44 Diaphragm for JB 665 Diaphragm for MHT 396 JB SYSTEMS: CROSS-OVERS Cross-over CN-kHz (12dB/oct.) Cross-over CN-6 (for MHT-396) 4,5 kHz (18dB/oct.) Cross-over CN-kHz (12dB/oct.) Cross-over CN-12 1,8 kHz (12dB/oct.) CN 18S Cross-over for Vibe 18S + Vibe 12 combination 4,40 9,00 29,50 36,50 43,00 1,80 3,00 4,60 37,00 18,00 27,50 36,50 45,50 29,50 6,60 26,50 19,00 29,00 39,00 59,00 79,00 159,00

Page: 6/25

JB SYSTEMS: SPEAKERGRILLS JB 200: Speakergrill 20cm / 8'' JB 250: Speakergrill 25cm / 10'' JB 300: Speakergrill 30cm / 12'' JB 380: Speakergrill 38cm / 15'' JB 460: Speakergrill 46cm / 18'' JB SYSTEMS: CABINET PARTS JB 6: Small handle cabinet JB 7: rubber foot JB 8: Chevron corner JB14: Bass Tube JB1200: Large handle cabinet Terminal plate TE-10 Terminal plate TE-20 (Speacon) SA-65:Adaptor for speaker

1,50 2,20 2,60 4,00 7,20

0,90 0,80 0,90 0,90 2,50 2,50 8,50 4,90

STANDS & ACCESSORIES

JB SYSTEMS: STANDS MS-21 silver: Mic stand turnarm + metal base MS-22 black: Mic stand turnarm + metal base SS-58 : speakerstand black 1,23m - 2,05m 40 kg SS-AIR : speakerstand with airbrake 1,10m - 1,80m 60 kg JB50:Table mic stand with heavy base JB55:Table mic stand JB SYSTEMS: LIGHTSTANDS LST-31 Lightstand + T-Bar LS-64 : lightstand 1,35m - 3,10m LS-270 : lighstand with winch ( 2,70m - 65 kg) N TB-64 : T-Bar 1,20m for 8 projectors TB-66 : T-Bar 1,50m for 12 projectors JB SYSTEMS: BAGS FOR STANDS BAG-MIC (for microphone stand) BAG-STAND (for speaker/lighting stand) JB SYSTEMS : COMPLETE LIGHTBRIDGES LB-30: lightbridge L=3,1m H=2,55m 60kg DJ-Lightbridge (incl. 2x LS270 - 2x DJ Truss 200 - 2x T-150) DJ Truss 150 (1.50 m length) DJ Truss 200 (2 m length) JB SYSTEMS : HOOKCLAMPS CR20 : Hookclamp for tube 16/20mm CR 30: Hookclamp for tube 30mm 4,70 5,10 121,00 436,00 60,00 85,00 6,60 9,70 55,00 52,00 106,00 13,50 15,00 26,50 23,50 39,00 49,00 23,50 19,00

Page: 7/25

CR 30/LI: Hookclamp for tube 30mm with protection CR50 HookclampTube 50mm CR50/LI Hookclamp Tube 50 mm with protection

6,90 5,70 7,90

JB SYSTEMS : ALUMINIUM CLAMPS -Tv Approved Quick clamp 201 (30 mm wide, 200kg) for tube 50mm Alu Clamp 301 (30 mm wide, 300 kg) for tube 50mm Alu Clamp 500 (50 mm wide, 500 kg) for tube 50mm Swivel Clamp 502 ASD : PROFESSIONAL STANDS ALT 290 Stand with winch 3,00 m ALT 300 Stand with winch 3,00 m ALT 400 Stand with winch 4,00 m + + ALT 470 Stand with winch 4,50 m ST 650 Stand with winch 6,50 m ALT 550 Stand with winch 5,50 m ALT 600 Stand with winch 6,00 m ASD : T pieces and accessories T-550 T-piece for ALT 550 T-650 T-piece for ST 650 T 350 T-piece Alu 250/290/350 T 150 T-piece Steel 150 CO 12 : Adaptor with base (for Followspot a.o.) EL 90 safety cable 60 cm (2mm plastified section) ASP : adaptor 35mm/28mm spigot TRIO 150: ALUMINIUM TRUSSINGS (Replaces Steel Truss) SD 15100 Alu truss L=1m (1 set of couplers incl.) SD 15200 Alu truss L=2m (1 set of couplers incl.) SD 15300 Alu truss L=3m (1 set of couplers incl.) ASD 1522 2-way corner 90 horizon. (1 set couplers incl.) ASD 153 3-way corner 90 (1 set of couplers incl.) EM 159 Baseplate (1set of couplers incl.) MD 150 A Connector set for 1 connection (3pcs) FM 20 Wall adaptator for SD-Truss TRIO 200: ALUMINIUM TRUSSINGS STM 1000 Alu truss L=1m 222 mm (1 set of couplers incl.) STM 2000 Alu truss L=2m 222 mm (1 set of couplers incl.) STM 3000 Alu truss L=3m 222 mm (1 set of couplers incl.) ACM 21 2-way corner 90 horizon. (1 set of couplers incl.) ALM 33 3-way corner 90 right (1 set of couplers incl.) ALM 34 3-way corner 90 left CON 19 Connector set M Trio TRIO 290: ALUMINIUM TRUSSINGS SX 29050 : L=0,5m 290mm (1 set of couplers incl.) SX 29100 : L=1m 290mm (1 set of couplers incl.) SX 29200 : L=2m 290mm (1 set of couplers incl.) SX 29300 : L=3m 290mm (1 set of couplers incl.) 109,00 129,00 174,00 226,00 (1 set of couplers incl.) MBPT Trio-plate / base version (1set of couplers incl.) 149,00 196,00 272,00 156,00 248,00 248,00 95,00 38,50 87,00 127,00 177,00 104,00 148,00 54,00 5,10 72,00 74,00 74,00 58,00 37,00 10,50 4,80 39,00 189,00 315,00 472,00 1.126,00 1.560,00 1.921,00 2.989,00 16,00 14,50 19,50 34,50

Page: 8/25

ASX 22 : 2-way corner 90 horizontal (1 set couplers incl.) ASX 31 : 3-way corner 90 right (1 set of couplers incl.) ASX 32 : 3-way corner 90 left (1 set of couplers incl.) EM 259 Empty Baseplate EML 259 Empty heavy baseplate (75kg) MXE 290 Kit for EM 259 and SX 290 FM 50 Wall adaptor for SX and SZ-truss MX 290 : connector-set for 1 connection (3 pcs) QUATTRO 290: ALUMINIUM TRUSSINGS N SZ 29050 : L=0,50m 290mm (1 set of couplers incl.) SZ 29100 : L=1m 290mm (1 set of couplers incl.) SZ 29200 : L=2m 290mm (1 set of couplers incl.) SZ 29300 : L=3m 290mm (1 set of couplers incl.) ASZ 22 : 2-way corner 90 (1 set of couplers incl.) ASZ 31 : 3-way corner 90 (1 set of couplers incl.) EM 259 Empty Baseplate MZE 290 Kit for EM 259 and SZ 290 FM 50 Wall adaptor for SX and SZ-truss MZ 290 : connector-set for 1 connection (4 pcs) MILOS ALUMINIUM CLAMPS Cell 202 clamp bolt + wingnut (charge = 500kg) Cell 204 swivel coupler (charge = 500kg) Cell 208 slim clamp bolt + nut (charge = 300kg) --- OTHER ITEMS ON REQUEST ---
132,00 192,00 192,00 68,00 385,00 34,00 119,00 37,00
162,00 185,00 253,00 325,00 186,00 269,00 68,00 40,50 119,00 40,50

32,00 53,00 27,50

CABLES & CONNECTORS
JB SYSTEMS: STANDARD PLUGS & CABLES N XMF - 0,50m : 0,50m signal cable XXR female + XLR male code 7-0061: 1m signal cable XLR female + XLR male code 7-0062: 2,5m signal cable XLR female + XLR male code 7-0063: 5m signal cable XLR female + XLR male code 7-0067: 10m signal cable XLR female + XLR male code 7-0068: 20m signal cable XLR female + XLR male code 7-0060: 5m signal cable XLR female + monojack code 7-0066: 10m signal cable XLR female + monojack code 2-0425: 6m guitar/line cable monojack + monojack code 2-0426: 10m guitar/line cable monojack + monojack 3,80 3,90 4,80 6,40 10,50 18,00 6,60 11,00 9,40 12,50

Page: 9/25

4,80 6,00 4,40 4,40 4,80 5,50 7,30 6,40 6,40 4,70 17,50 27,50 52,00 3,10 3,40 5,90 2,60 3,00 2,70 2,90 5,40 6,10 3,60 2,90 2,90 1,70 5,40 5,40 5,40 5,40 6,80 5,40 7,40 7,40
code 2-0430: 1,5m audio cable 2xRCA gold + 2x monojack code 2-0435: 3m audio cable 2xRCA gold + 2x monojack code 2-0365: 0,5m audio cable 2xRCA gold + 2xRCA gold code 2-0368: 1m audio cable 2xRCA gold + 2xRCA gold code 2-0370: 1,5m audio cable 2xRCA gold + 2xRCA gold code 2-0375: 2,5m audio cable 2xRCA gold + 2xRCA gold code 2-0380: 5m audio cable 2xRCA gold + 2xRCA gold code 2-0445: 1,5m audio cable 2xRCA gold + 2xXLR male code 2-0440: 1,5m audio cable 2xRCA gold + 2xXLR female MJC-1M5 : 1,5m audio cable 2xRCA + Minijack stereo code 2-0505: 5m speakercable Pro-lock + Pro-lock code 2-0510: 10m speakercable Pro-lock + Pro-lock code 2-0525: 25m speakercable Pro-lock + Pro-lock code 1300 : 6,3mm monojack, 2pcs code 1301 : 6,3mm stereojack, 2 pcs code 1302 : 6,3mm stereojack FEMALE, 2pcs code 1303 : XLR male, 2 pcs code 1304 : XLR female, 2 pcs code 1305 : XLR Chassis male, 2pcs code 1306 : XLR Chassis female, 2pcs code 1307 : Prolock male, 2pcs code 1308 : Prolock female, 2pcs code 1309 : Double RCA adaptor female - female, 2pcs code 1310 : RCA plug male, 2pcs code 1311 : RCA plug female, 2pcs code 1312 : Adaptor RCA female to monojack 6,3mm male, 2pcs code 1313 : Adaptor XLR male to stereojack 6,3mm male, 2pcs code 1314 : Adaptor XLR female to stereojack 6,3mm male, 2pcs code 1315 : Adaptor XLR male to stereojack 6,3mm female, 2pcs code 1316 : Adaptor XLR female to stereojack 6,3mm female,2pcs code 1317 : Adaptor XLR(3) female to XLR(3) female, 2pcs code 1318 : Adaptor XLR(3) male to XLR(3) male, 2pcs code 1277 : adaptor plug XLR male 3 pin > XLR female 5 pin code 1278 : adaptor plug XLR male 5 pin > XLR female 3 pin JB SYSTEMS: CABLE ON REEL MC-01 Black - Balanced Mic Cable (reel 100m) MC-01 Blue - Balanced Mic Cable (reel 100m) MC-01 Red - Balanced Mic Cable (reel 100m) SPR 2150 - Round Speaker Cable 2 x 1,50 (reel 100m) SPR 2250 - Round Speaker Cable 2 x 2,50 (reel 100m) SPR 2400 - Round Speaker Cable 2 x 4,00 (reel 50m) SPR 4250 - Round Speaker Cable 4 x 2,50 (reel 50m) SC-01 - Unbalanced Audio Signal Cable (reel 100m)

59,00 59,00 59,00 111,00 178,00 122,00 170,00 67,00

Page: 10/25

TASKER: CABLE (length = 100m) TASKER C118 2x0,14 diode cable TASKER C114 BLACK 2x0,25 mic.cable TASKER C114 GREY 2x0,25 mic.cable TASKER C260 GREEN 2x0,25 mic.cable TASKER C260 BLUE 2x0,25 mic.cable TASKER C260 YELLOW 2x0,25 mic.cable TASKER C260 RED 2x0,25 mic.cable TASKER C128 BLACK 2x0,35 DMX-cable TASKER C275 2x1,5 Round speakercable TASKER C276 2x2,5 Round speakercable TASKER C288 4x2,5 Round speakercable TASKER C102 red//black 2x0,75 / 100m TASKER C102 red//black 2x1,50 / 100m TASKER C102 red//black 2x2,50 / 100m TASKER: CABLES WITH CONNECTORS TASKER: Micro-cable mono jacks Neutrik RF143 C114 black with NP2C/NP2C 3m RF146 C114 black with NP2C/NP2C 6m RF149 C114 black with NP2C/NP2C 9m RF1412 C114 black with NP2C/NP2C 12m TASKER: Micro-cable mono jack/XLR F Neutrik RF213 C114 black with NP2C/NC3FX 3m RF216 C114 black with NP2C/NC3FX 6m RF219 C114 black with NP2C/NC3FX 9m RF2112 C114 black with NP2C/NC3FX 12m TASKER: Micro-cable XLR M/F Neutrik RF311 C114 black with NC3FX/NC3MX 1m RF313 C114 black with NC3FX/NC3MX 3m RF316 C114 black with NC3FX/NC3MX 6m RF319 C114 black with NC3FX/NC3MX 9m RF3112 C114 black with NC3FX/NC3MX 12m TASKER: Micro-cable XLR M/F Neutrik RF333 C128 black with NC3FX/NC3MX 3m RF336 C128 black with NC3FX/NC3MX 6m RF339 C128 black with NC3FX/NC3MX 9m RF3312 C128 black with NC3FX/NC3MX 12m TASKER: LS cable 2x2,00 XLR Neutrik RF363 C266 black with NC3FX/NC3MX 3m RF366 C266 black with NC3FX/NC3MX 6m RF369 C266 black with NC3FX/NC3MX 9m RF3612 C266 black with NC3FX/NC3MX 12m 22,00 28,00 32,00 34,00 18,00 21,50 25,00 28,50 15,50 17,00 20,00 23,00 26,00 19,50 22,00 24,50 27,50 18,50 21,00 23,50 27,50 61,00 84,00 84,00 105,00 105,00 105,00 105,00 117,00 166,00 206,00 409,00 41,50 78,00 124,00

Page: 11/25

TASKER: LS cable 2x2,50 Speakon Neutrik SS27603 C276 black with NL4FC/NL4FC 3m SS27606 C276 black with NL4FC/NL4FC 6m SS27609 C276 black with NL4FC/NL4FC 9m SS27612 C276 black with NL4FC/NL4FC 12m TASKER: LS 2x1,50+2x2,50 Speakon Neutrik RF549 C268 black with NL4FC/NL4FC 9m TASKER: LS cable 2x2,00 Speakon XLR Neutrik RF646 C266 black with NL4FC/NC3MX 6m TASKER: LS cable 2x2,00 Speakon XLR Neutrik RF666 C266 black with NL4FC/NC3FX 6m RF6612 C266 black with NL4FC/NC3FX 12m NEUTRIK: CONNECTORS JB 100 : DBA Dummy-Cover JB 110 NC-3-FDL (D-size) female XLR 3 pin chassis JB 111 NC-5-FDL (D-size) female XLR 5 pin chassis JB 115 NC-3-MDL (D-size) male XLR 3 pin chassis JB 116 NC-5-MDL (D-size) male XLR 5 pin chassis JB 145 NJ-3-FP-6C Female chassis jack JB150 NP-2-X Mono jack cable JB 155 Stereo jack cable NP-3-X JB 160: Female jack cable stereo NJ-3-FC-6 JB 200: Female XLR 3 cont. Cable NC-3-FXX JB 201: Female XLR 5 cont. Cable NC-5-FX JB 205: Male XLR 3 cont. cable NC-3-MXX JB 206: Male XLR 5 cont. Cable NC-5-MX JB 210: Speacon connector 4C /30A NL-4-FX JB 211: Speacon connector 2C / 30A NL-2-FC JB 215: Speacon chassis / big 4C / 30A NL-4-MP-R JB 220: Speacon chassis / little 4C / 30 NL-4-MP JB 225: Speacon female-female 4C / 30A NL-4-MMX

30,00 35,50 37,50 41,00

44,00

32,00

32,00 41,00
1,00 4,80 11,00 5,00 8,80 7,00 4,20 5,30 8,50 4,50 10,50 4,30 8,50 5,80 4,60 4,30 2,70 6,70 7,60 4,30 7,60 4,30
JB 280:Powercon cable power in 20A/250V NAC-3-FCA JB 285:Powercon chassis power in 20A/ 250V NAC-3-MPA JB 281:Powercon cable power out 20A/250V NAC-3-FCB JB 286:Powercon chassis power out 20A/250V NAC-3-MPB

FLIGHTCASES

JB SYSTEMS: WOODEN FLIGHTCASES Carpet Mixer Case/ 5 Unit DJ Case 150 (for 2x MCD-150 + MX-100) DJ Case 200 (for 2x MCD-200 + Beat-4 / MX-4) TT-Case (Turntable Case) N Pro 445/3.5 U Multi-functional Case Flightcase for 1x iMove 5S (ELC or HID) 102,00 77,00 87,00 58,00 179,00 109,00

Page: 12/25

85,00 82,00 367,00 259,00 189,00 179,00 161,00 219,00 83,00 99,00 119,00 123,00 219,00 249,00
Flightcase for 1x Winner / Super Winner (ELC or HID) Flightcase for 2x Dynamo / Dynamo 250 Flightcase for 2x BT250/BT575 Flightcase for 4-Bar N Lighteffect Case 1 (for 2x iColor 4) N Lighteffect Case 2 (for 2x BT-36 / Calypso / Cyclope) N Flightcase for Led DJ-Bar N Flightcase for Followspot Rackcase 2 Unit Rackcase 4 Unit N Rackcase 6 Unit Rackcase 8 Unit (take apart version) Rackcase 12 Unit (take apart version) Rackcase 16 Unit (take apart version) EMS: 400-SERIES (with butterfly catch) EMS unit EMS unit EMS unit EMS unit EMS: EXTENTION KITS 400 EMS MOD 01A (400 PC/ 400 series) EMS MOD 01B 400 EMS MOD 01C 400 EMS: 500-SERIES (with butterfly catch) EMS unit EMS unit EMS unit EMS unit EMS: EXTENTION KITS 500 EMS MOD 01A 500 EMS MOD 01B 500 EMS MOD 01C 500 EMS: ADAPTORS A.MIX/400 for EMS mixer-adapt. for 400 series A.MIX/500 for EMS mixer-adapt. for 500 series JV-Case A.Controller / Steel (for EMS) EMS: OPTIONS EMS EM-106 Clamb 4 pcs (+screws) EMS EM-111 Cassette 6 pcs (+screws) EMS EM112 corner support 8 pcs (+screws) EMS EM-113B/400 Wheelplate w. wheels (brake) EMS EM-113B/500 Wheelplate w. wheels (brake) EM 114 Plastic catch (+ screws) EMS EM-115 Butterfly catch (penn) EMS EM-116 Handle penn EMS EM-117 Allen Key
152,00 196,00 229,00 268,00

37,00 75,00 95,00

189,00 242,00 278,00 334,00

45,00 85,00 106,00

36,50 36,50 14,50
9,70 5,90 9,30 146,00 146,00 1,10 6,60 6,30 14,50

Page: 13/25

FLIGHTCASES: OPTIONS RP-0,5U rackpanel 0,5 unit (blankpanel) RP-1U rackpanel 1 unit (blankpanel) RP-2U rackpanel 2 unit (blankpanel) RP-3U rackpanel 3 unit (blankpanel) RP-1U/V ventilation rackpanel 1 unit RP-2U/V ventilation rackpanel 2 unit RP-1U/XLR for 12 x XLR (D-size) RP-1U/Signal for 8 x XLR + 12 x RCA etc. RP-2U/PC 8 for 8 x Mennekes power-outlet 19" Adapters/ 2 unit (set) 19" Adapters/ 3 unit (set) 19" Adapter for 9,5" /1U: Set 19" adapt. F. wireless micro MS-00 mountingset JV-Case ALU (2,2 mm) MS-01 mountingset rackstrip ALU (3 mm) (for JV-Case) MS-02 mountingset rackstrip STEEL (1,5 mm) (for EMS) MS-03 20x black PVC washer M6 MS-04 12x rackbold+washer M6x16 blck MS-05 set for JB systems kit MS-06 12x rackbold black M6x20 with nuts MS-07 50x M3x10 bold with nuts (XLR) MS-08 50x M4x16 bold with nuts (Mennekes) Mains outlet socket (IP 54) Lucas DJTS1,5N (4xsocket + cable 1,5m) Chacon code 44504 (4x socket + cable 1,5m) JV-CASE: OPEN FLIGHTCASE JV-Case 440/7U "Basic" JV-Case A.Mix 440/ALU (19" mixer mounting) JV-Case Topdeck (non 19" mounting or closed) JV-Case A.Controller/ALU JV-Case 440 "Dustcover" JV-CASE: COMPLETE FLIGHTCASES JV-Case: Complete for 19" Mixer JV-Case: Complete for NON 19" Mixer 133,00 152,00 91,00 14,50 34,50 14,50 54,00 4,30 5,60 7,90 9,60 6,30 8,80 6,60 6,40 7,40 15,50 16,00 12,50 1,70 1,70 1,70 1,40 1,60 2,20 2,30 3,20 3,40 2,20 5,40 4,40

LIGHT-PROCESSORS

JB SYSTEMS: LIGHT-MODULATORS LM 140 Light Controller 4x1000W inductive + prog RS 40 4x 1000W inductive + progs 139,00 104,00

Page: 14/25

JB SYSTEMS: LIGHT-PROCESSORS LM 440/F Belgium - France socket LM 440/G German socket LM 430 (DMX Output only) JB SYSTEMS: DMX Controllers CA 16 (16 ch DMX switch controller) EC-16/D Effect Commander CMX 24 (24 ch DMX controller) SM-1612 Scanmaster N SCM-1 Scenemaster JB SYSTEMS: Dimmer & Switchpacks + + DSP-4/F Belgian-French socket (4 ch dimmerpack) DSP-4/G German socket (4 ch dimmerpack) BRITEQ : PRO T-Bars DB-46/F - French Socket DB-150/G - German Socket Led 4-Bar - Belgian-French Socket Led 4-Bar - German Socket JB SYSTEMS: DISPATCHERS

249,00 249,00 139,00

59,00 99,00 197,00 169,00 117,00

169,00 169,00

269,00 269,00 169,00 169,00
Powercenter PC 8/French - Belgian 8 x switch cabled Powercenter PC 8/German 8x switch cabled DMX-SOFTWARE DMX Creator / Basic DMX Creator 1024+ (2xDMX out + memory with SD-cards) LITE-PUTER: LIGHT PROCESSORS DX 404 dimmerpack 4 x 8A (dmx) DX 626A 6ch 20A dimmerpack DX1220 Dimmer & power pack 12x 20A

97,00 97,00

455,00 1.129,00

113,00 319,00 1.049,00

LIGHT-EFFECTS
BRITEQ : MOVING HEADS & WASH BT 250 S (Philips MSD 250/2 NOT included) BT 575 S (Philips MSI 575HR/2 NOT included) BT 575 W (Philips MSR 575/2 NOT included ) BT 700 S (Osram HTI 700W/D4/75 NOT included) BRITEQ : LED MOVING WASH BT 36-L1 (LED WASH 36x 1W Luxeon LEDs) Lens 15 for BT 36-L1 Lens 45 for BT 36-L1 BRITEQ : LASER EFFECTS + Club Laser 7 mk II (300mW red + 60mW green + 50mW Blue) 2.599,00 0,05 946,00 24,00 24,00 0,05 0,05 0,05 0,05 888,00 1.276,00 1.356,00 2.338,00

Page: 15/25

GENI: COLORCHANGERS + Mojocolor MOC (ELC 250W / 24V included) JB SYSTEMS: LIGHT EFFECTS Blowstar (2x Hal 300W/120V included) Color Ball (EHJ 250W / 24V included) Color Burst (2x hal 300W / 120V included) Devine (EFP 100W/12V included) Double Derby (2 x Hal 300W / 120V included) Exercet MH 270 M (EFP 100W/12V included) Gobo Sweeper (EFP 100W/12V included) Goboflower (ELC 250W/24V included) Lightsplash II (BRL 50W / 12V incl.) Miniwave (EFP 100W/12V included) Patriot (EFP 100W/12V included) Penguin / Barrel MH 835 BP (BRL 50W / 12V incl.) Penguin MH 835 P (BRL 50W / 12V incl.) Smart Beam System (4x xenon 300W/240V incl.) Smart Moon System (4x Xenon 300W/240V incl.) Stormbird (ELC 250W/24V included) Thunderbird X (FCR 100W / 12V incl.) Tomahawk (EFP 100W/12V included) Twin Ball (2x FCS 150W / 24V included) Typhoon (2x Hal 300W / 120V included) World Star (EHJ 250W / 24V included) iColor 4 (4x R7S 500W included) CA 8/F Easy Footcontroller for iColor 4 CA-32 colormix - controller for iColor 4 CA-32/F Footcontroller for CA-32 and iColor 4 JB SYSTEMS: LED LIGHT EFFECTS N Proton Andromeda Apollo N Taurus Solar / White Solar / RGB Astro Bag Astro Color Astro White Atlas Orion CPB-4 Centerpiece bracket for 4x Orion Led Devil (10W Led) Calypso Cyclope Led Barrel Led Beam Sweeper Led Flower 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 69,00 99,00 119,00 114,00 139,00 139,00 39,00 120,00 120,00 99,00 179,00 39,50 249,00 159,00 229,00 99,00 99,00 79,00 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 96,00 159,00 115,00 99,00 149,00 89,00 99,00 139,00 69,00 89,00 99,00 87,00 84,00 277,00 277,00 149,00 95,00 109,00 159,00 119,00 159,00 179,00 48,50 109,00 59,00 0,05 167,00

Page: 16/25

JB SYSTEMS: DMX LIGHT EFFECTS Superwinner - HID (Without lamp) The Winner II (ELC 250W / 24V included) The Rover (ELC 250W / 24V included) Dynamo 250 (ELC 250W / 24V included) Falcon (ELC 250W/24V included) Panther (ELC 250W/24V included) Jaguar (ELC 250W/24V included) Puma (ELC 250W/24V included) Helios (Philips MSD 250/2 NOT included) Phaeton (HX 185 - 800 Watt circular lamp included) Poseidon (J-type S 800 Watt lamp included) CA-8 multipurpose handcontroller JB SYSTEMS: LED MOVING HEAD N Lynx (20Watt LED) iRock 7S Scanner (Without lamp) iRock 7B Barrel effect (Without lamp) iRock 5C Colorchanger (Without lamp) iMove 7S Moving Head (Without lamp) iMove 5S Moving Head (ELC250W/24V included) iMove 5S - HID (Without lamp) iLead Controller for iSolution series only CA-8 multipurpose handcontroller JB SYSTEMS : LASER EFFECTS Twin Beam Color Laser (100mW green - 80mW red)
0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05
299,00 259,00 259,00 189,00 219,00 249,00 259,00 169,00 289,00 199,00 159,00 22,00
0,05 0,05 0,05 0,05 0,05 0,05 0,05
465,00 549,00 549,00 429,00 699,00 499,00 499,00 199,00 22,00
629,00 369,00 299,00 159,00 259,00 49,00 29,00
Space Color Laser (30mW green - 80mW red - 90mW yellow) Laser Burst II (40mW green + 80mW red) SPACE-3 Laser (30 mW green laser) Lounge Laser (80mW red + 30mW green + 5Watt blue LED) Scarab Laser : Red laser < 5 mW Laser Interlock Switch (Safety feature) JB SYSTEMS: DECORATIVE LIGHTING Mini Kaleido (EFP 100W/12V included) Inferno (ELC 250W / 24V included) Waterwave (ELC 250W included) Virtual Flame AF101 (3x MR 11/20W included) Kaleido (ELC 250W / 24V included) Oil (EHJ 250W / 24V included) Oil 150 (Without lamp) Oil 250 (Without lamp) Led Warning Light / Blue Led Warning Light / Red 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05
99,00 119,00 119,00 69,00 179,00 109,00 129,00 139,00 42,00 42,00

Page: 17/25

Police light red Police light yellow Police light blue Six Light ( 6 x colored lamp 40W included) JB SYSTEMS: LOGOPROJECTORS Publispot (HID 32Watt lamp included) Logo Projector (EHJ 250W/24V included) JB SYSTEMS: MIRRORBALLS / ROTATORS MB Motor Battery MB Motor 3 RPM 240V MB Motor Heavy Duty (for MB 40 and 50 cm) Mirror Ball 4'' 10cm fine Mirror Ball 8'' 20cm fine Mirror Ball 12'' 30cm fine Mirror Ball 16'' 40cm fine Mirror Ball 20'' 50cm fine Mirror Ball set 20cm+motor+pinspot+colourchanger Mirror Ball set 30cm+motor+pinspot+colourchanger

0,05 0,05 0,05 0,05

19,00 19,00 19,00 49,00

0,05 0,05

279,00 199,00
5,40 12,00 34,00 6,00 14,00 29,50 40,50 64,00 59,00 79,00

LEDPRODUCTS

BRITEQ : HIGH POWER LED PRODUCTS Led Colorbank RGB (648 pcs Led ; 15 beam angle) N Led Blaster 108 / 15 Beam (108 pcs 1 Watt Led) N Led Blaster 108 / 30 Beam (108 pcs 1 Watt Led) Led Powerbank 15 Beam (54 pcs 1 Watt Led) Led Powerbank 30 Beam (54 pcs 1 Watt Led) Led Powerbeam RGB (36 pcs 1 Watt Led ; 15 beam angle) 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 491,00 1.399,00 1.399,00 777,00 777,00 541,00 659,00 1.099,00 129,00 4,00 10,50 18,50 8,60 24,00 42,50
N Led Expo Beam 30 Beam (36 pcs 1 Watt Led - 28W + 8A) N Led Expo Bank 30 beam (54 pcs 1 Watt Led - 42W + 12A) PB-01 Controller for Powerbank and Powerbeam Signal cable 0,8m for Tubeled / Powerbank / Powerbeam Signal cable 5m for Tubeled / Powerbank / Powerbeam Signal cable 10m for Tubeled / Powerbank / Powerbeam Powerlink cable 1m for Powerbank / Powerbeam Powerlink cable 5m for Powerbank / Powerbeam Powerlink cable 10m for Powerbank / Powerbeam JB SYSTEMS : LED TUBES OUTDOOR TubeLed Outdoor (230V) TubeLed Controller Signal cable 0,8m for Tubeled / Powerbank / Powerbeam Signal cable 5m for Tubeled / Powerbank / Powerbeam Signal cable 10m for Tubeled / Powerbank / Powerbeam TubeLed Power cable IP44 5m
109,00 79,00 4,00 10,50 18,50 26,00

Page: 18/25

TubeLed Power cable IP44 10m JB SYSTEMS : LED PRODUCTS LedPar 64/ Silver (212 Hewlett-Packard leds) LedPar 64/ Black (212 Hewlett-Packard leds) LedPar 56/ Silver (156 Hewlett-Packard leds) LedPar 56/ Black (156 Hewlett-Packard leds)

42,50

149,00 149,00 129,00 129,00 8,10
Set Frost Filters - 5 pcs n 253 "light frost" 234mm x 234mm N LED Pinspot N LED DJ-Bar (Complete Set) LED Ball OUTDOOR RGB (30cm ball with 91 leds ; IP 55) LED Ball INDOOR RGB (30cm ball with 91 leds) Wall Adaptor for LED Ball RGB Stand Adaptor for LED Ball RGB LED Panel RGB (30 x 30 cm; 72 leds) LED Octopanel OC-1 Controller for Octopanel Ledpipe RGB Controller for Ledpipe LP-01 Ledpipe signal cable 1 m (white) LP-05 Ledpipe signal cable 5 m (white) LP-10 ledpipe signal cable 10 m (white) LED Spot RGB (91 leds ; beam angle = 15) LED Wash RGB (91 leds ; beam angle = 40) LED Strip 100 RGB (length=1m ; 144 leds) LED Strip 50 RGB (length=50 cm ; 72 leds) LED Strip 20 RGB (length=20 cm ; 24 leds) MLS 50 Mini Ledstrip 50 cm RGB MLS 20 Mini Ledstrip 20 cm RGB MLS-CAB 20 (5pcs) Connection cable LP 8115 Ledprojector RGB (15 beam angle) LP 8140 Ledprojector RGB (40 beam angle) LP 3315 ledpar 16 RGB (15 beam angle) MR 16 Panel Mount Armature LED Groundlight (39 leds ; IP68) N Led Nano Wash / Blue N Led Nano Wash / Cool White N Led Nano Wash / RGB N Led Nano Beam / Warm White N Led Nano Beam / Cool White 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05

59,00 659,00 129,00 129,00 11,50 7,20 109,00 319,00 99,00 139,00 99,00 7,60 16,50 20,00 89,00 89,00 79,00 49,00 32,50 48,00 30,50 6,50 64,00 64,00 37,50 4,50 74,00 49,00 49,00 49,00 59,00 59,00

Page: 19/25

N Led Nano Beam / Blue
59,00 319,00 169,00 99,00 43,00 108,00 7,60 17,50 88,00 53,00 109,00 159,00
LED MANAGER (powersupply 300 Watt + controller/timer) MINI LED MANAGER (powersupply 100 Watt) N MICRO LED MANAGER (powersupply 50 Watt) N LED-PSU-50W / 24Vdc LEDCON-02 (controller for Ledmanager and Ledpars) LEDCABLE-01 (powersupply cable 1m for ledmanager) LEDCABLE-05 (powersupply cable 5 m for ledmanager) CCM-50 roll 50m cable 4wires for Ledmanager + projectors N LED Wall Dimmer N WD-Merger N LED Director JB SYSTEMS : LED ROPELIGHT Led Ropelight RGB 24V (30m roll) Powercable 24V Middle Connector (10 pcs) Mounting Track 2m Endcap (10 pcs) 0,05
193,00 4,90 4,70 3,80 1,20

STROBO'S & PARTS

GENI: STROBOSCOPES & PARTS FL-045B DJ strobo CE (45 Watt) FL 1800 Geni Golden Strobe + FL 1800D Geni Golden Strobe DMX FL01CX Remote control for FL 1800/FL 045B/ Zapstrobes/ STR-300 BF 04D 4ch Strobe Ignitor (analog or DMX strobes) JB SYSTEMS: STROBO'S & PARTS MINI FLASH Small strobo (20W) Max Strobe BF-045P (45 Watt) STR-300 strobo 300 (75 Watt) N LED Strobe Flash Rope 5m (random flashing) GENI : ZAP STROBO'S ZAP FL 45 P (45 Watt) ZAP FL 150 P (150 Watt) Zap strobe COLORLENS RED Zap strobe COLORLENS BLUE Zap strobe COLORLENS YELLOW 48,00 66,00 3,50 3,50 3,50 10,50 42,00 74,00 52,00 59,00 51,00 116,00 133,00 23,50 82,00

Page: 20/25

FOGGERS, BUBBLE- & SNOWMACHINES
JB SYSTEMS: BUBBLEMACHINES Bubble Machine Liquid for Bubble Machine (5 Liter) JB SYSTEMS: FOGGERS N FX-1000 (1000 Watt; including DMX controller) FX-1700 (1700 Watt; including DMX controller) RC-1 Wireless Remote for FX-1700 JB SYSTEMS: FOG LIQUIDS HZL-5 Hazer Liquid (5 Liter) Fog Liquid Hi Tech 5Liter (clear) Fog Liquid STD 5Liter (yellow) Fog Liquid STD 1Liter (yellow) MAGICAN handfog (spray) JB SYSTEMS: FRAGRANCES Fragrance - Coco Fragrance - Strawberry Fragrance - Apple Fragrance - Muscus Fragrance - Red Energy Fragrance - Tutti Frutti ANTARI: PROFESSIONAL FOGGERS F-80 Z party fogger 700W wire controller FC-5 wireless controller for F-80Z / FX-100 Z-300 II Fazer (timer controller included) HZ-400 professional hazer (DMX + timer) ANTARI: Z-II Series Z-1020 Vertical Fogmachine Z-1200 II X 1200 Watt DMX Z-1500 II 1500 Watt DMX Z-3000 II 3000 Watt DMX ANTARI: X-SERIES X-310 T Fazer 1000W 3500CuFt (DMX + Timer) JB SYSTEMS: SNOWMACHINES Snowmachine Snow liquid 5 L 249,00 29,50 608,00 339,00 329,00 469,00 579,00 63,00 52,00 245,00 1.218,00 5,00 5,00 5,00 5,00 5,00 5,00 67,00 19,50 15,00 5,00 11,00 169,00 279,00 29,00 59,00 19,50

Page: 21/25

PROJECTORS & PARTS

FOLLOW SPOTS Follow Spot 1000W (without lamp) Follow Spot MSR 575/2 (without lamp) THEATRE SPOTLIGHTS Theatre spot 500W - PC (including Fresnel lens) Theatre spot 1000W - PC (including Fresnel lens) Barndoor for Theatrespot 500W Barndoor for Theatrespot 1000W JB SYSTEMS: BLACK LIGHTS Blacklight Strip 36 W - 1,20m (lamp included) + Blacklight Strip 18 W - 0,60m (lamp included) Black Light armature TL 40 GE: 40W Black Light armature TL 20 GE: 20W + TL Blacklight PRO (1,20m with grill) UV-400 Black Light ( w/o lamp ) BRITEQ : MULTIPARS Multi parcan black incl. 4 lenses Multi parcan silver incl. 4 lenses Barndoor for multiparcan (coupe flux) / Black Barndoor for multiparcan (coupe flux) / Silver Lens-tool for Multi parcan JB SYSTEMS: PROJECTORS PAR 64 silver (cable and colorframe included) PAR 64 black (cable and colorframe included) PAR 56 silver (cable and colorframe included) PAR 56 black (cable and colorframe included) PAR 56 short black (cable and colorframe included) PAR 56 short silver (cable and colorframe included) PAR 36 CF101/1 black CE LVD PAR 36 CF101/1 silver CE LVD PAR 46 Silver (socket E27) CE LVD + colorframe PAR 46 Black (socket E27) CE LVD + colorframe PAR 30 silver (socket E27) CE LVD + colorframe PAR 30 black (socket E27) CE LVD + colorframe PAR 20 silver (socket E27) CE LVD + colorframe PAR 20 black (socket E27) CE LVD + colorframe PAR 16 black with GU-10 socket CE LVD + colorframe PAR 16 silver with GU-10 socket CE LVD + colorframe BM 36MS Colourchanger for CF 101/1 TF 36: Transfo 30W / 6V JB SYSTEMS: REFLECTORS + Colorframes RF 64 Reflector for Par 64 RF 56 Reflector for Par 56 PRO Colorframe for Par 64 / Silver 7,50 7,50 4,70 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 29,00 29,00 25,50 25,50 19,00 19,00 12,50 16,50 25,00 25,00 13,00 13,00 12,00 12,00 8,50 8,50 14,00 6,50 0,05 0,05 62,00 67,00 15,00 25,50 4,60 0,05 0,05 0,05 0,05 0,05 0,05 41,00 35,50 18,00 20,00 79,00 149,00 0,05 0,05 83,00 95,00 17,00 19,00 0,05 0,05 499,00 699,00

Page: 22/25

Colorframe for Par 64 / Black Colorframe for Par 56 PRO / Silver Colorframe for Par 56 PRO / Black Colorframe for Par 56 SHORT / Silver Colorframe for Par 56 SHORT / Black COLOUR FILTERS Set filters PAR56 short - 5 colours 19x19cm Set filters PAR56 short - 10 colours 19x19cm Set filters PAR56 - 5 colours 23cm x 23cm Set filters PAR56 - 10 colours 23cm x 23cm Set filters PAR64 - 5 colours 25cm x 25cm Set filters PAR64 - 10 colours 25cm x 25cm Colorsheet "Yellow 101" (1,22 x 0,53 m) Colorsheet "Orange 105" (1,22 x 0,53 m) Colorsheet "Primary Red 106" (1,22 x 0,53 m) Colorsheet "Sky Blue 068" (1,22 x 0,53 m) Colorsheet "Congo Blue 181" (1,22 x 0,53 m) Colorsheet "Primary Green 139" (1,22 x 0,53 m) Colorsheet "Dark Green 124" (1,22 x 0,53 m) Colorsheet "Magenta 113" (1,22 x 0,53 m) Colorsheet "Medium Blue-Green 116" (1,22 x 0,53 m) Colorsheet "Mauve 126" (1,22 x 0,53 m) Colorsheet "Vanity Fair 793" (1,22 x 0,53 m)

4,70 4,70 4,70 4,70 4,70

5,70 9,50 8,00 13,50 10,50 19,50 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 8,10 0,80 0,80 0,80 0,80 0,80 0,80 0,80 0,80
Set Frost Filters - 5 pcs n 253 "light frost" 234mm x 234mm Colorlens for Pinspot / Blue Colorlens for Pinspot / Red Colorlens for Pinspot / Green Colorlens for Pinspot / Yellow Colorlens for Pinspot / Orange Colorlens for Pinspot / Aqua Colorlens for Pinspot / Pink Colorlens for Pinspot / Purple
PAR LAMPS Sylvania Hi-Spot Superia ES- 50W 230V - GU10 (Par 16) Sylvania Hi-Spot 63 - Spot 50W 230V E27 (Par 20) Sylvania Hi-Spot 63 - Flood 50W 230V E-27 (Par 20) Sylvania Hi-Spot 95 - Spot 75W 230V E-27(Par 30) Sylvania Hi-Spot 95 - Flood 75W 230V E-27 (Par 30) Sylvania PAR 38 SPOT 12 - 120W 230V Sylvania PAR 38 FLOOD - 120W 230V PAR GE 6V / 30W 100u PAR 36 AR 111 OSRAM 6V / 35W 2000u 5,40 9,40 9,40 9,20 9,20 7,00 7,00 7,10 8,80

Page: 23/25

300 PAR 56 GE 230V / 300W NSP 300 PAR 56 GE 230V / 300W MFL 300 PAR 56 GE 230V / 300W WFL GE CP88 (PAR 64 / 500W MFL) GE CP60 Super PAR 64 Very Narrow Spot 1000W GE CP61 Super PAR 64 Narrow Spot 1000W GE CP62 Super PAR 64 Medium Flood 1000W Sylvania CP60 Very Narrow Spot 1000W (Par 64) Sylvania CP61 Narrow Spot 1000W (Par 64) HALOGEN LAMPS Osram code 64610 - BRL 50W/12V Osram code 64625 - FCR 100W/12V Osram code 64640 - FCS 150W/24V Osram code 64657 - EHJ 250W/24V Osram code 64664 (400W/36V) Osram code 64514 (300W/120V) Osram code 64516 (300W/230V) Sylvania EFP A1/231 100W 12V dicro Philips code 6423/5H - EFR 150W/15V (longlife) Philips ELC/5H 24V/250W (reflector lamp) (longlife) General Electric ENH 250W /120V (reflector lamp) Philips code 6874P 300W / 240V GY9,5 (raylight) Philips code 7389 500W / 240V GY9,5 (raylight) General Electric HPL 575 - X (multi parcan) longlife Philips code 6820/P 500W / 230V GY9,5 (Theaterspot) Philips code 6996/P 1000W / 230V GX9,5 (Theaterspot) Philips code 6994/P 2000W / 230V GY16 (Theaterspot) Osram code 64702 500W / 230V R7S DISCHARGE LAMPS Osram HCI-T 150W/NDL (=CDM 150T) 6000h Osram HTI 150W 750h Osram HMI 575W/GS 95V/575W 750h Osram HMI 1200W/GS 100V/1200W 750h + Philips MSD 200 70V/200W GY9,5 2000h
19,00 19,00 19,00 48,00 37,50 37,50 37,50 38,50 38,50
3,90 3,70 3,50 5,10 17,00 11,00 11,00 8,40 12,00 12,50 14,00 20,50 17,50 35,50 21,00 20,50 41,00 4,40
41,00 129,00 128,00 194,00 125,00 119,00 139,00 141,00 96,00 123,00
Philips MSD 250/2 70V/250W GY9,5 2000h (for BT-250) Philips MSI 575 HR/2 (for BT 575 Spot) Philips MSR 575/2 (for BT 575 Wash / Followspot 575) Sylvania BA 250/2 70V/250W GY9,5 2000h (for BT-250) Sylvania BA 575/2 SE NHR 8.5 (for BT 575 Wash)

Page: 24/25

Xenpow HID 32 - 12 (for Publispot) Xenpow HID 150 (10,000 lumen, 6500K, 1000h) Xenpow NSD 150 K (for iMove 7S) Xenpow NSD 250/2 K (for BT-250) Xenpow HMQ 575/2 K (for BT 575 Spot) Xenpow HMQ 700/2 K (for BT-700 Spot) BLACKLIGHT LAMPS Iwasaki code H400-BL 400W/E-40 Sylvania Blacklight Blue TL 18 Watt 60 cm Sylvania Blacklight Blue TL 36 Watt 1,20m DIVERS LAMPS HX 185 - 800 Watt Xenpow (for Phaeton) J-Type S 800 Watt Xenpow (for Poseidon) Red lamp for sixlight (40 W - E27) Yellow lamp for sixlight (40 W - E27) Green lamp for sixlight (40 W - E27) Blue lamp for sixlight ( 40 W - E 27) Lamp for policelight 25W 230V - B22 socket Lamp for Virtual flame (Red) Lamp for Virtual flame (Blue) Osram code 3894 (3W/12V) for Minilight

Operation Manual Mode d'emploi Gebruiksaanwijzing Bedienungsanleitung Manual de instrucciones Manual do utilizador

WWW.BEGLEC.COM

Copyright 2005 by BEGLEC cva.
Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.

EN FR NL DU ES PT

Version: 1.1

DISPOSAL OF THE DEVICE

Dispose of the unit and used batteries in an environment friendly manner according to your country regulations.

DCLASSER LAPPAREIL

Dbarrassez-vous de lappareil et des piles usages de manire cologique Conformment aux dispositions lgales de votre pays.
VERWIJDEREN VAN HET APPARAAT
Verwijder het toestel en de gebruikte batterijen op een milieuvriendelijke manier conform de in uw land geldende voorschriften.

ENTSORGUNG DES GERTS

Entsorgen Sie das Gert und die Batterien auf umweltfreundliche Art und Weise gem den Vorschriften Ihres Landes.

DESHACERSE DEL APARATO

Reciclar el aparato y pilas usadas de forma ecologica conforme a las disposiciones legales de su pais.

ENGLISH

OPERATION MANUAL

SAFETY INSTRUCTIONS:

To protect the environment, please try to recycle the packing material as much as possible. A new light effect sometimes causes some unwanted smoke and/or smell. This is normal and disappears after some minutes. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages. This unit is for indoor use only. Dont place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object enters the unit, immediately disconnect the mains power. Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture must be fixed at least 50cm from surrounding walls. Dont cover any ventilation openings as this may result in overheating. Prevent use in dusty environments and clean the unit regularly. Keep the unit away from children. Inexperienced persons should not operate this device. Maximum save ambient temperature is 45C. Dont use this unit at higher ambient temperatures. The units surface temperature may reach up to 85C. Dont touch the housing with bare hands during its operation. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. Allow the device about 10 minutes to cool down before replacing the bulb or start servicing. Always unplug the unit when it is not used for a longer time or before replacing the bulb or start servicing. The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. Check that the available voltage is not higher than the one stated on the rear panel of the unit. The power cord should always be in perfect condition: switch the unit immediately off when the power cord is squashed or damaged. Never let the power-cord come into contact with other cables! This fixture must be earthed to in order comply with safety regulations. Dont connect the unit to any dimmer pack. Always use an appropriate and certified safety cable when installing the unit. In order to prevent electric shock, do not open the cover. Apart from the lamp and mains fuse there are no user serviceable parts inside. Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type and electrical specifications! In the event of serious operating problems, stop using the fixture and contact your dealer immediately. The housing and the lenses must be replaced if they are visibly damaged. Please use the original packing when the device is to be transported. Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit.

FEATURES

This unit is radio-interference suppressed. This product meets the requirements of the current European and national guidelines. Conformity has been established and the relevant statements and documents have been deposited by the manufacturer. This device has been designed to produce decorative effect lighting and is used in light show systems. Versatile and very compact Colour changer based on four 300W or 500W R7S lamps Equipped with 4 heat resistant dichroic filters in red, blue, green and yellow 4ch DMX mode: preset colours - chase selector speed - master dimmer Master/slave and stand alone mode Optional CA8 or special CA8F foot controller available

BEFORE USE

Before you start using this unit, please check if theres no transportation damage. Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual. Check the contents: Check that the carton contains the following items: iCOLOR-4 Hanging bracket with 2 knobs R7S 500W/230V lamps (4pcs) Operating instructions

JB SYSTEMS

iCOLOR4
Important: Never look directly into the light source! Dont use the effect in the presence of persons suffering from epilepsy.

LAMP (RE)PLACEMENT

In case of replacement of the lamp or maintenance, do not open the fixture within 10 minutes until the unit cools down after switching off. Always unplug the unit before servicing! Always use the same type of spare parts (bulbs, fuses, etc.) When replacing parts, please only genuine spare parts. Switch off the unit and unplug the mains cable. Wait for about 10 minutes until the unit has been cooled down. Use a screwdriver to unscrew the screw that closes the lamp compartment of the fixture. On the inside you will see the 4 lamp sockets. Unplug the old lamps. Hold the lamp firmly while pressing the new lamp gently in the socket. Attention! Check the label on the backside of the device or see the technical specifications in this manual to know which lamp should be used. Never install lamps with a higher wattage! Lamps with higher wattage generate temperatures the device was not designed for. Dont touch the bulb with bare hands! This drastically shortens the lifespan of the lamp. If you touched the lamp, clean it with a cloth and a little denatured alcohol. Wipe the lamp off after installing. Close the lamp compartment with the screw. Done!

DESCRIPTION:

1. Hanging bracket with 2 knobs on both sides to fasten the unit and a mounting hole to fix a mounting hook. 2. DMX input: 3pin male XLR-connector used to connect universal DMX-cables. This input receives instructions from a DMX-controller or from another iCOLOR4 light effect when used in master/slave mode. 3. DMX output: 3pin female XLR-connector used to connect the iCOLOR4 with the next unit in the DMX chain or with another iCOLOR4 when used in master/slave mode. 4. jack used to connect the optional CA-8 controller. 5. Button used to control the music sensitivity 6. Internal microphone 7. Mains cable 8. Automatic fuse 9. Cooling fans 10. DIP switches, used to set the DMX-starting address of the unit. 11. In stand alone this red led blinks to the rhythm of the music, in DMX mode this led flashes when a DMX signal is detected. 12. Barn doors 13. Dichroic filters 14. Lamp compartment, to be opened with this screw.

Important: The installation must be carried out by qualified service personal only. Improper installation can result in serious injuries and/or damage to property. Overhead rigging requires extensive experience! Working load limits should be respected, certified installation materials should be used, the installed device should be inspected regularly for safety. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The fixture must be fixed at least 50cm from surrounding walls. The device should be installed out of reach of people and outside areas where persons may walk by or be seated. Before rigging make sure that the installation area can hold a minimum point load of 10times the devices weight. Always use a certified safety cable that can hold 12times the weight of the device when installing the unit. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the main attachment fails. The device should be well fixed; a free-swinging mounting is dangerous and may not be considered! Dont cover any ventilation openings as this may result in overheating. The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. JB SYSTEMS 4/48 iCOLOR4

OVERHEAD RIGGING

OPERATING INSTRUCTIONS
The iCOLOR4 can be controlled in 5 different ways: 1. Standalone 1unit: First set DIP switch nr10 to ON position. Now just connect the unit to the mains and put on some music. The unit will start working automatically to the rhythm of the music. 2. Two or more units in master/slave setup: Connect 2 or more units together using good quality balanced XLR microphone cables (like for example JB Systems code 70063). The unit that has no cable connected to its input will react as master; the others are the slave units. Dont forget to set the DIP switches on the units as shown on the right! 3. Connect the optional CA-8 or CA-8F controller for more control: The CA-8 controller can only be used in standalone or master/slave mode. The CA-8F foot controller is very handy for use on stage! Its functions are identical to those of CA8. Connect the controller to the jack input of the first unit (master). Now you can control all the connected units: STANDBY BUTTON: Press this button to start/stop blackout mode on all connected units. The led is ON when the blackout function is active. MODE/FUNCTION BUTTONS: With the MODE button you can select 3 different modes: The LED is off: The iCOLOR4 is in Sound mode colors change to the rhythm of the music. When you set the music sensitivity button to zero, the colors will slowly change. With the FUNCTION button you can select 2 different strobe functions. The LED is blinking: with the FUNCTION button you can control the electronic dimmer circuit. The LED is on: The iCOLOR4 is in manual mode (not sound activated). With the FUNCTION button you can select the desired colors.

4. Connect the optional CA-32 Colormix controller for even more control: This controller makes it very easy to control the iCOLOR4: you can select predefined colors, select different color chases, color fades, etc. Also chase speed and master dimmer can be adapted. Check the user manual of this unit to learn more about its functions. 5. Controlled by universal DMX-controller: The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to daisy chain your DMX controller and all the connected light effects with a good quality XLR M/F balanced cable (ex. JB Systems ref. 7-0063). To prevent strange behavior of the light effects, due to interferences, you must use a 90 to 120 terminator at the end of the chain. Never use Y-splitter cables, this simply wont work!
Each light effect in the chain needs to have its proper starting address so it knows which commands from the controller it has to decode. How to set the DIP-switches to obtain the right starting address: On the back of the iCOLOR4 you will see that each of the first 9 DIP-switches corresponds to certain value:

Dip Value #########9 256

You can combine the values of these switches to become any starting address between 1 and 512: Begin address = 01 switch 1=ON values: 1 Begin address = 05 switch 1+3=ON values: 1+4 = 5 Begin address = 09 switch 1+4=ON values: 1+8 = 9 Begin address = 13 switch 1+3+4=ON values: 1+4+8 = 13 Begin address = 62 switch 2+3+4+5+6=ON values: 2+4+8+16+32 = 62
ENGLISH DMX-CONFIGURATION OF iCOLOR4:

SPECIFICATIONS

Mains Input: Fuse: Sound Control: DMX connections: Lamp: Size: Weight: AC 230V, 50Hz 250V 15A slow blow (20mm glass) Internal microphone 3pin XLR male / female 4x R7S 500W/230V (J Type) 45 x 27 x 17.5cm 7kg
Every information is subject to change without prior notice
Make sure the area below the installation place is free from unwanted persons during servicing. Switch off the unit, unplug the mains cable and wait until the unit has been cooled down. During inspection the following points should be checked: All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded. Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any deformation. When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced. The mains cables must be in impeccable condition and should be replaced immediately when even a small problem is detected. In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be cleaned monthly. The interior of the device should be cleaned annually using a vacuum cleaner or air-jet. The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surroundings can cause greater accumulation of dirt on the units optics. Clean with a soft cloth using normal glass cleaning products. Always dry the parts carefully. Clean the external optics at least once every 30 days. Clean the internal optics at least every 90 days. Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!