M96SHDM MUDDER Specialty AG Tractors
MODEL Engine Manufacturer Engine EPA Emission level PTO HP (kw) @ Rated RPM Aspiration Displacement cu in (liters) Number of Cylinders Number of Cylinders Aspiration Maximum torque ft. lbs. Injection type Multi-Valve System (16 Valves) Alternator, Amp Fuel Tank Capacity gal (liters) Manufacturer's Description Shuttle Lever / Type Speeds Forward / Reverse Speeds w/ Creeper Clutch Transmission Clutch Diameter, in Brake Type Main Clutch Type Brake Operation Final Drives Differential lock 4WD Front Axle Wide Axle Tread Spacing for front and rear axles, Optional Power Steering PTO Type Speeds @ Engine RPM PTO 540/1000 PTO's Clutch Type Category Hitch Draft control sensing Type Standard Pump Flow gpm (l/min) psi (k/sq.cm) Hydraulic System & System Pressure Three Point Hitch Lift Link Ends Stabilizers Remote Valves Std (optional) Hitch Category SAE Lift Capacity lb (kg) Instrumentation Type of Instrument Cluster Front Axle in. Rear Axle in. Front Axle Clearance in. (mm) in. (mm) Dimensions Tread Crop Clearance Settings Min. Ground Clearance in. (mm) Drawbar height in. (mm) Wheelbase Weight Slowest Creep Speed MPH Creep speeds Travel Speeds w/Std tires Low Range @ rated speed High Range @ rated speed MPH MPH MUDDER Tractor Competitive Comparison Kubota M96SHDM Mudder New Holland TD5050 High Clearance Kubota New Holland V3800DI-T NEF Tier III Tier III 84 (62.6) @ (59.7) @ 2500 Turbocharged / Intercooled Turbocharged & Intercooled 230 (3.8 L) 274 (4.5L) Turbocharged w/Wastegate Turbocharged and Intercooled 238 @ 1500 rpm 346 @ 1500 rpm E-CDIS (Emission-Center Direction System) Direct Yes No 45 (80 optional) 120 46.2 (175) 23.8 (90) Swing-Shift Mechanical-Shuttle Left Hand / Hydraulic Left Hand / Mechanical 24F / 24R w/creep 4 speed synchronized and Hi/Lo Swing shift adding 4 more 20F / 12R with Creep Speed synchronized speeds in main shift. Plus Auxillary Hi/Lo Range 24F / 24R 20F / 12R Wet Main Clutch (Multi-Plate) Dry 7 discs, 5.23" clutch discs 12" (305 mm) Wet multi disc Wet Disc Multi-Plate Multi Plate Wet Clutch Dry 12" (305 mm) Ceremetallic Disc 12 Hydraulic Hydraulic Outboard planetary front and rear axle Outboard planetary front and rear axle Mechanical Differential Lock Front and Rear Axles Front axle limited slip Rear axle mechanical lock Bevel Pinion Universal Joint Wide axle spacers move the bevel gear housing outward. This design maintains open crop clearance under the front axle by retaining the gear housing inside the wheel dish Hydrostatic Power Steering Hydraulic Independent 540 @ 2205 Optional Wet multi plate clutch pack Cat II Top Link / Mechanical Open Center 17.2 (65) 2845 (200) Telescoping Telescoping 1 (2 or 3 optional) Category II 4630 (2100) std / 7490 (3400) Optional Analog with LCD Display 61.6 & 65.6 (80 inch wide row kit is optional provides 72.0 - 76.0 - 80.0) 60.0 64.0 (Optional wide kit provides 72.0 in. - 80.1 in.) 30.3 (770) 27.3 (693) 25.8 (655) 28 (710) 95.3 (2420) 8000 (3629) 0.12 @ rated speed / 0.10 @ 540 PTO Speed 0.12, 0.15, 0.19, 0.23, 0.29, 0.37, 0.46, 0.56 0.66, 0.84, 1.03, 1.27, 1.62, 2.07, 2.55, 3.12, 3.32, 4.22, 5.20, 6.38, 8.16, 10.39, 12.80, 16.90 13.6-38 Standard tire size: With optional tires multiply standard speeds: > 106% for 230/85R48 > 109% for 12.4R46 For operating at 540 PTO Speed, multiply travel speeds by 85%. 13.6 - 38 320/65R48 12.4R46 Wide row spacing is obtained by turning out the wheel dish. Therefore the Universal Joint gear housing remains exposed hanging over the crops. Hydrostatic Power Steering Mechanical Independent 540 @ 2199 Optional 11" (280 mm) Dry Organic Disc Cat II Lower Link / Mechanical Open Center 16.1 (60.9 l/min) 2755 (194) Telescoping Telescoping 1 ( 3 optional) Category II 5025 (2279 kg) Analog and digital combo 61.7 - 81.9 59.2 - 79.6 Standard 72.2 - 83.8 w/spacer wide track IFNA 24.6 (625) IFNA IFNA 91.8 (2332) 7804 (3540) 0.15 @ 2500 RPM 0.15 - 17.5 IFNA IFNA IFNA 13.6R38 R1W 9.5R44 9.5R48 320/80R42 John Deere 5095MH High Clearance John Deere JD PowerTech M4045 Tier III 80 (59.7) @ 2200 Turbocharged 276 (4.5 L) Turbocharged 372 @ 1600 rpm Direct No 70 30.3 (114.7) Synchro-Shuttle (Power-Reverser Opt) Right Hand / Mechanical Left Hand / Elec-Hyd. Optional PowerReverser 32F X 16R with Creep Speed 12F / 4R (16F X 16R or 32F X 16R Opt.) Dry IFNA Wet Disc Dry Ceremetallic Disc Wet Clutch on PowerReverser Hydraulic Outboard planetary front and rear axle Front axle limited slip Rear axle mechanical lock Universal Joint Wide row spacing is obtained by turning out the wheel dish. Therefore the Universal Joint gear housing remains exposed hanging over the crops. Hydrostatic Power Steering Mechanical Independent 540 @ 2100 (540E @ 1600) Optional Dry Disc Cat II Top Link / Mechanical Open Center 18.4 (69.7) 2828 (199) Rigid Link ends Telescoping None, (1 - 3 Optional) Category II 3595 (4,498 Optional) Analog and digital combo 52.8 to 80.1 52.8 to 80.1 23.4 (595) IFNA IFNA IFNA 85.6 (2178) 7100 (3220) 0.18 @ 2200 RPM 0.18, 0.23, 0.27, 0.33, 0.45, 0.57, 0.70, 0.83 A Range: 1.19, 1.5, 1.81, 2.18 / B Range: 2.81, 3.56, 4.37, 5.18 C Range: 6.87, 8.81, 10.68, 12.75 / D Range: 10.62, 13.62, 16.50, 19.68 230/95R40 Standard tire size: With optional tires multiply standard speeds: > 13.6-38 Optional multiply 109% 230/95R40 R1W 13.6-38 R1W N/A

Engine

Drive train
Formula Calculating Travel Speeds w/Optional Tires Standard Tire Size Optional Optional Optional

M96SHDM MUDDER Tractor Competitive Comparison
Engine Manufacturer Engine EPA Emission level PTO HP (kw) @ Rated RPM Aspiration Displacement cu in (liters) Number of Cylinders Injection type Multi-Valve System (16 Valves) Alternator, Amp Fuel Tank Capacity gal (liters) Manufacturer's Description Shuttle Lever / Type Speeds Main Clutch Type Brake Operation Final Drives Differential lock 4WD Front Axle Wide Axle Tread Spacing for front and rear axles, Optional Power Steering PTO Type Speeds @ Engine RPM 540/1000 PTO's Clutch Type Category Hitch Draft control sensing Type Standard Pump Flow gpm (l/min) System Pressure psi (k/sq.cm) Lift Link Ends Stabilizers Remote Valves Std (optional) SAE Lift Capacity lb (kg) Type of Instrument Cluster Front Axle Rear Axle in. in. in. (mm) in. (mm) in. (mm) in. (mm)

Engine

Drive train
Kubota M96SHDM Mudder Kubota V3800DI-T Tier III 84 (62.6) @ 2600 Turbocharged / Intercooled 230 (3.8 L) 4 E-CDIS (Emission-Center Direction System) Yes 45 (80 optional) 46.2 (175) Swing-Shift Left Hand / Hydraulic 24F / 24R w/creep 4 speed synchronized and Hi/Lo Swing shift adding 4 more synchronized speeds in main shift. Plus Auxillary Hi/Lo Range Multi-Plate Wet Clutch Hydraulic Outboard planetary front and rear axle Mechanical Differential Lock Front and Rear Axles Bevel Pinion Wide axle spacers move the bevel gear housing outward. This design maintains open crop clearance under the front axle by retaining the gear housing inside the wheel dish Hydrostatic Power Steering Hydraulic Independent 540 @ 2205 Optional Wet multi plate clutch pack Cat II Top Link / Mechanical Open Center 17.2 (65) 2845 (200) Telescoping Telescoping 1 (2 or 3 optional) 4630 (2100) std / 7490 (3400) Optional Analog with LCD Display 61.6 & 65.6 (80 inch wide row kit is optional provides 72.0 - 76.0 - 80.0) 60.0 64.0 Optional wide kit provides 72.0 in. - 80.1 in. 30.3 (770) 27.3 (693) 25.8 (655) 28 (710) 95.3 (2420) 8000 (3629) 0.12 @ rated speed 0.10 @ 540 PTO Speed 0.12, 0.15, 0.19, 0.23 0.29, 0.37, 0.46, 0.56 0.66, 0.84, 1.03, 1.27 1.62, 2.07, 2.55, 3.12, 3.32, 4.22, 5.20, 6.38, 8.16, 10.39, 12.80, 16.90 13.6-38 Standard tire size: With optional tires multiply standard speeds: > 106% for 230/85R48 > 109% for 12.4R46 For operating at 540 PTO Speed, multiply travel speeds by 85%. 13.6 - 38 320/65R48 12.4R46
New Holland TD5050 High Clearance New Holland NEF Tier III 80 (59.7) @ 2500 Turbocharged & Intercooled 274 (4.5L) 4 Direct No 120 23.8 (90) Mechanical-Shuttle Left Hand / Mechanical 20F / 12R with Creep Speed
John Deere 5095MH High Clearance John Deere JD PowerTech M4045 Tier III 80 (59.7) @ 2200 Turbocharged 276 (4.5 L) 4 Direct No 70 30.3 (114.7) Synchro-Shuttle (Power-Reverser Opt) Right Hand / Mechanical Left Hand / Elec-Hyd. Optional PowerReverser 32F X 16R with Creep Speed
Dry 12" (305 mm) Ceremetallic Disc Dry Ceremetallic Disc Wet Clutch on PowerReverser Hydraulic Hydraulic Outboard planetary front and rear axle Outboard planetary front and rear axle Front axle limited slip Rear axle mechanical lock Front axle limited slip Rear axle mechanical lock Universal Joint Universal Joint Wide row spacing is obtained by turning out the wheel dish. Wide row spacing is obtained by turning out the wheel dish. Therefore the Universal Joint gear housing remains exposed Therefore the Universal Joint gear housing remains exposed hanging over the crops. hanging over the crops. Hydrostatic Power Steering Hydrostatic Power Steering Mechanical Independent Mechanical Independent 540 @ @ 2100 (540E @ 1600) Optional Optional 11" (280 mm) Dry Organic Disc Dry Disc Cat II Lower Link / Mechanical Open Center 16.1 (60.9 l/min) 2755 (194) Telescoping Telescoping 1 ( 3 optional) 5025 (2279 kg) Analog and digital combo 61.7 - 81.9 59.2 - 79.6 Standard 72.2 - 83.8 w/spacer wide track IFNA 24.6 (625) IFNA IFNA 91.8 (2332) 7804 (3540) 0.15 @ 2500 RPM 0.15 - 17.5 IFNA IFNA Cat II Top Link / Mechanical Open Center 18.4 (69.7) 2828 (199) Rigid Link ends Telescoping None, (1 - 3 Optional) 3595 (4,498 Optional) Analog and digital combo 52.8 to 80.1 52.8 to 80.1 23.4 (595) IFNA IFNA IFNA 85.6 (2178) 7100 (3220) 0.18 @ 2200 RPM 0.18, 0.23, 0.27, 0.33, 0.45, 0.57, 0.70, 0.83 A Range: 1.19, 1.5, 1.81, 2.18 B Range: 2.81, 3.56, 4.37, 5.18 C Range: 6.87, 8.81, 10.68, 12.75 D Range: 10.62, 13.62, 16.50, 19.68 230/95R40 Standard tire size: With optional tires multiply standard speeds: > 13.6-38 Optional multiply 109% 230/95R40 R1W 13.6-38 R1W N/A

Hydraulic System & Three Point Hitch

Instrumentation

Dimensions Tread Settings
Front Axle Clearance Crop Clearance Min. Ground Clearance Drawbar height Wheelbase Weight Slowest Creep Speed Creep speeds Low Range @ rated speed
Travel Speeds w/Std tires
High Range @ rated speed MPH
Formula Calculating Travel Speeds w/Optional Tires
Standard Tire Size Optional Optional Optional
13.6R38 R1W 9.5R44 9.5R48 320/80R42