Operators Can Stay in the Drivers Seat to Control the Hesston 4690
he Hesston 4690 is an in-line design baler that produces dense square-shouldered bales 15 in. (380 mm) 22 in. (560 mm), weighing up to 180 lbs., tied with three twines. The center feed and single-stage stuffer assure smooth feeding with minimum leaf loss. This engine-driven machine with its swing tongue feature allows flexibility in towing vehicle selection and operator choice of in-line or conventional side pull operation. The control console mounted on the towing vehicle allows the operator to control all baler functions without leaving the operators seat. Hay & Forage Industries, Hesston, KS, USA; 316-327-6611.

AE50/ 4

Outstanding Innovations for 1997
SYNCHRO Spraying Systems Are Durable and Fit Most Conventional Equipment
apstan Ag Systems SYNCHRO Spray Control System is a unique technology to enhance the precision, range, utility and economics of agricultural spraying. The Flow Control Unit uses durable pulsing solenoid valves attached to standard spray nozzle tips to control flow of fluid spray for ground and aerial agricultural spray rigs. It eliminates pressure as a determinant of flow rate in conventional spraying systems. Flow rate ranges are expanded to over eight-to-one and response times are reduced to a fraction of a second. The pressure control unit maintains pressure independent of flow rate. This enables an operator to curtail spray drift on-the-go through droplet size changes, while maintaining target flow rates. Flow and spray droplet size can be adjusted using GPS/GIS inputs through standard rate controllers. Flow and pressure units are designed to be easily and unobtrusively retrofit for conventional agricultural spray equipment. Capstan Ag Systems Inc., Topeka, KS, USA; 913-232-4466.
Jackrabbits Wood Chuck Desticker Sorts Out Waste During Harvest
ackrabbits new Wood Chuck Desticker was designed to remove wood from almonds, walnuts or pecans being loaded into trucks at field side. The Wood Chuck and the JJL 20/30 Elevator (also referred to as the Wood Chuck Elevator) were designed to process 8,000 lbs. of wood and product in two minutes or less. The elevator bin has a 20-in., slow-moving horizontal belt to deliver the load to the Wood Chuck and the 30-in.-wide incline belt. The almonds fall through the Wood Chuck to the fast moving incline belt leaving any sticks snagged in the Wood Chuck chain. The sticks travel with the chain over the top of a slide chute and are released onto it. The sticks slide down to a cross conveyor then on to another pivoting exit conveyor for stockpiling or loading into a trailer. A clean load (75% stick free) of nuts is delivered to a huller. Sticks removed at the field can be burned in the field. Jackrabbit Research & Marketing Division, Ripon, CA, USA; 209-599-6118.

AE50/ 5

Case IH Mapping Software Determines Crop Yield and Moisture in the Field
ase IHs AFS Mapping Software, when combined with the Case IH Yield Monitor System, offers a mapping method for grain yield and moisture based on field location. This software can be used to map and store information on field boundaries, fertility levels, crop inputs, scouting data and aerial or satellite photographs. The maps can be used by a producer or consultant to vary inputs to maximize net income. Unique features include a Map Express for ease in downloading yield monitor data, a Harvest Statistics Analyzer for summarizing yield data by other map layers, and an easy to use digital map registration process for loading aerial or satellite photos. Users with little computer knowledge can successfully develop maps. The software is also designed to grow with the user as comfort level and knowledge increases. The AFS Mapping Software with the Case IH Yield Monitor was the first complete U.S. factory-installed system available on the market. Case Corp., Burr Ridge, IL, USA; 630887-2191.
QC3 2-Way Units Offer Users Various Speed and Other Options
he QC3 2-way unit has an electrically actuated modular valve and 1-in. manifold system with either one or two 3 4-in. full port outlets. QC3 2-way units (one outlet port) can be fitted with one of 10 different gear motor speeds from two power head series, and 10 wiring options in either 12 or 24 volts DC or AC. The QC3 can be equipped with either a standard (EH3) or a heavy duty (EH2) actuator with actuation speeds up to 25 seconds. Eight sizes of 90 and straight hose barb options are also available on the QC3. KZCO Inc., Ashland, NE, USA; 402-944-2767.

AE50/ 6

Round Bale Accumulator Moves 4- and 5-Ft.-Wide Bales with Ease
ohn Deeres 20 Round Bale Accumulator will move and place round bales more efficiently and reduce time spent retrieving bales from the field. The Accumulator mounts to the round baler axle. A chain-driven conveyor moves the bale onto the carrying platform that holds up to two bales. The conveyor is driven by a hydraulic motor. The motor is powered by oil diverted from the baler gate cylinder with a sequence valve. This drive allows use of the baler hydraulics to power the accumulator. Slats on the conveyor stabilize the bale during movement. Bale guide rails keep the bales upright. The rails are adjustable for 4- and 5-ft.-wide bales. A monitor/controller mounted in the tractor indicates bales on the accumulator. At the push of a rocker switch, a solenoid activates a hydraulic cylinder to lower the rear gate and release the bales. The Round Bale Accumulator saves time, fuel and money. John Deere Ottumwa Works, Ottumwa, IA, USA; 800-50DEERE.

BOOMER Compact Tractors are Rugged, Sleek and Reliable
ew Hollands BOOMER Compact Tractors are a new line of three-cylinder, diesel-powered tractors built to provide large-tractor toughness and operator convenience for a variety of jobs in a sleek, ergonomic design. Model 1530, with its 25 gross engine hp, and Model 1630, with a 27.3 gross engine hp, provide deluxe features. The companion higher-horsepower Models 1725, with 29 gross engine hp, and 1925, with 34 gross engine hp, provide the same rugged reliability, serviceability and convenience in a lower-cost feature package. BOOMER options include a 2WD front axle or a 4WD front axle with standard steer or SuperSteer; gear or hydrostatic transmission; power steering; and three choices of tire type. A number of attachments enhance the tractor, using the BOOMERs high-capacity live hydraulics with mid-mounted ports. BOOMER tractors are designed for simple servicing with access to daily service ports without opening the hood. New Holland North America, Inc., New Holland, PA, USA; 717-355-3656.

AE50/ 7

The Aeromaster SP 155 Compost Turner is Comfortable and Agile
idwest Bio-Systems Aeromaster SP155 Compost Turner is designed for rapid production of high quality compost through timely and efficient aeration, uniform moisture control and precise inoculation of composting materials. It provides the operator with a comfortable and agile machine with minimum environmental impact on the composting site. The advanced drum design naturally shapes windrows and blends raw materials while providing maximum aeration. The unique water and inoculant injection system provides one pass moisture control and inoculation without leaching and pollution. The retractable drum assembly allows entrance and exit from a windrow at any time without destroying the row continuity. These features enhance composting operation management for high rate production of high quality compost. Midwest Bio-Systems, Inc., Tampico, IL, USA; 815-542-6426.
Radial Bean Meter Provides Increased Accuracy Over Feedcup Meters
or growers who use finger pickups on their MaxEmerge 2 and MaxEmerge Plus Planters, John Deere offers a new radial soybean meter. The Radial Bean Meter provides increased accuracy over feedcup meters for growers who prefer planting soybeans with a mechanical system. Currently, the new soybean meter is not compatible wth MaxEmerge Planters. The John Deere feedcup meter will continue to be offered as an option for growers who plant other crops besides soybeans with a mechanical meter. The new meter is designed for reliable performance and durability. Normal-wear components typically cover significantly more acreage than other mechanical meters before service is required. John Deere Seeding Group, Moline, IL, USA; 309-765-2239.

AE50/ 8

Large Capacity Case IH Solid Row Crop Planter
he Case IH 12/23 Solid Row Crop planter is the most productive new model in the 955 Early Riser line. The Solid Row Crop allows you to plant 12 rows of corn 30 in. (762 mm) apart or 23 rows of soybeans 15 in. (381 mm) apart the same day. The planter accurately meters seeds using the unique Cyclo Air system and places seeds in a precision-controlled environment. Three 20-bushel seed hoppers are easy to fill using a new platform. The frame is a three-section flex design that easily folds for transport using controls in the tractor cab. New technologies include seed tube couplers that reduce seed tube length, wider carrying wheels for increased flotation, a master/slave hydraulic system for faster raise time and lower
hydraulic pressures, a piston pump for liquid fertilizer delivery and narrow gauge wheels for improved residue flow. Case Corp., Burr Ridge, IL, USA; 630-887-2341.
6000 Series Xplorer Sprayers Offer Precise Applications
illmars Xplorer is used to produce a broad range of crops including vegetables, small grains and row crops. It provides precise, timely fertilizer and crop protection product application. Xplorer uses the latest techniques for operator safety and comfort in its custom designed cab. The suspension system, with boom suspension, offers stability for precisely placing materials for maximum value. A high horsepower-to-weight ratio produces extra power to operate in harsh conditions. New Steerite steering gives operators complete machine control. An on-board computer controls spraying to ensure products are applied properly. These features are combined with simple, reliable hydraulic systems to create a versatile machine. Willmar Manufacturing, Willmar, MN, USA; 320-231-9400.

AE50/ 9

TurboDrop Saves Time and Money for Spraying Applications
he TurboDrop Venturi Nozzle (or the TurboDrop Venturi used with conventional spray tips) retrofits existing agricultural sprayers to provide unequaled drift reduction, increased canopy penetration and improved chemical coverage. A ceramic metering orifice precisely controls the flow rate, while the venturi pulls in air and the unique mixing chamber blends that air with the spray solution. The result from the spray tip is larger, drift-resistant, penetrating droplets accelerated toward the target exploding on impact. The TurboDrop does what expensive air-assisted sprayers are designed to do without the help of fans or compressors using a simple, economical, retrofittable sprayer accessory. TurboDrop makes the sprayer more efficient, effective, versatile and safe. Greenleaf Technologies, Inc., Covington, LA, USA; 504-892-2778.

Improved Engine Gives New Case IH 8900 Series Tractors Extra Power
ase IH 8900 Series tractors have more horsepower and new features to increase performance and operator productivity. Horsepower has increased to 225 on the 8950, which is the largest model. Added horsepower was achieved without sacrificing durability by making engine improvements such as a waste gate turbocharger and fivehole injector nozzles. Cooling system enhancements from a new viscous fan, and 106% more grille screen area, compliment this power. Productivity was improved by using new electronic hitch features. The operator can select automatic disengagement/engagement (sensed by hitch position) of the rear axle differential lock and/or front axle drive mode for easier headland operations. A slip limit feature automatically raises the rear hitch when rear wheels exceed a preset slip limit. The 8900 Series is designed to be compatible with Case IHs site-specific farming technology. Case Corp., Racine, WI, USA; 414-363-0428.

AE50/ 10

TR2 Tracker Suited for Wide Variety of Row and Field Crops
he GK TR2 Tracker is a selfpropelled, hydrostatically driven rubber track sprayer with on-the-go tracking width adjustment from 60 to 80 in. Powered by an 80 hp diesel engine, it features a 250 gallon spray tank and 50- to 60-ft. spray booms with a pressurized cab and charcoal filtration. With 11.7-in.-wide tracks and 30-in. ground clearance, the TR2 is suited for a wide variety of row and field crops. With only 5.4 psi ground pressure, growers can spray when it is too muddy for traditional wheeled sprayers. The TR2 rides and handles smoothly using a unique bogey roller suspension system on the tracks and an adjustable steering wheel control to suit field conditions. The modular spray system is easily
removed, allowing attachment of an optional three-point mount for granular fertilizer spreading. GK Machine, Donald, OR, USA; 503-678-5525.
Consistency Over Row Unit Travel Featured in Down Force System
he new John Deere Pneumatic Down Force System uses air pressure to provide consistent and positive down force to the MaxEmerge Plus Planter row unit. This system allows the customer to apply the precise amount of down force needed to meet the field conditions they encounter and makes adjustment easier. The biggest advantage of the pneumatic system is consistent down force over the full range of row unit travel. The system uses two air springs per row unit and a single air compressor to provide 0 to 400 lbs. of force per opener. Pneumatic Down Force provides single point control of down force to all units, 0 to 400 lbs. of down force infinitely variable, consistent down force throughout the full range of row unit travel and the ability to remove down force from splitter row units on 1780 planters with one valve. John Deere Seeding Group, East Moline, IL, USA; 309-765-2077.

AE50/ 11

New Holland Model 585 Three-Tie Baler Features Widest Pickup in the Industry
ew Hollands Model 585 Three-Tie Baler will process and package forage crops and various crop residues into a marketable bale. The 585 is engine driven and features a self-contained hydraulic system that controls the tongue swing, pickup lift and bale density system. This allows the operator to use various tow vehicles without adding auxiliary hydraulics. The 585 provides performance monitors and controls mounted in the towing vehicle. The remote control box includes warning lights for various engine pressures and temperatures and controls for the tongue shift, pickup lift, engine rpm, bale density and work lights. The 585 can be operated in the offset or in-line baling position. The in-line position allows the 585 to be operated in 40-in. beds to reduce soil compaction. The 585 features the widest pickup in the industry, which feeds into an in-line feeder system that saves more leaves while making solid, uniform bales in all crop conditions. New Holland North America, Inc., New Holland, PA, USA; 717-355-3656.
Increased Productivity for the New Intermediate Square Baler
ohn Deeres 100 Intermediate Square Baler produces a dense, tightly packed 31.5- 31.5-in. bale that can weigh up to 1,000 lbs. The John Deere 100 baler was designed to bale a variety of crops from straw to high moisture hay. It features a unique Powr-Feed system that uses a cam-type torque limiting clutch that disengages when overloaded but engages when torque increases as the flywheel slows down to clear the plug. The standard pre-cutter allows the operator to make bales of cut crop, which enhances feeding characteristics. Gearbox and shaft drives, a wide low-profile pickup, 24-ball twine storage capacity and a controller/monitor add to increased operator productivity. Available options include a tandem axle, compressed air knot-
ter cleaning system, a last bale ejection system and a knotter and field lighting package. John Deere Ottumwa Works, Ottumwa, IA, USA; 800-50DEERE.

AE50/ 12

HPL Series Cornheads Low Profile Lets Them Operate in Wind-Damaged Fields
ixalls HPL series cornheads offer simple hydraulic drives, large drive sprockets for increased gathering belt life and improved product flow for sweet corn and seed corn harvesting. The row units and auger are driven directly by hydraulic motors. The HPL cornhead incorporates two sonar sensors. They provide automatic lateral tilt and vertical height control. The head allows automatic return to a preset height and cab-controlled adjustment of the head height. Lateral sonar control keeps the head parallel to the ground in any condition or on any terrain. The HPL series cornheads have a low profile enabling them to operate in wind-damaged cornfields. Plastic shields and snouts reduce weight, eliminate rust, reduce product drag and facilitate wind-damaged corn harvesting. The HPL series cornheads use cab-adjustable stripper plates and aggressive Pixall Knife Rolls with 10 pairs of meshing knives for tough stalk conditions. Pixall Limited Partnership, Clear Lake, WI, USA; 715-263-2112.

12/23 Row Planter Ensures Accurate Row Spacing on Contours
he Great Plains pull type 23 row planter is a unique solution to field function and road transport problems associated with the large split row planter market. The unit was designed for no-till and no-till coulter mounting. The quick-disconnect rear frame allows fast, easy changing from planting 30- to 15-in. rows and ensures high flotation when planting with either row width. The front bar coulter mounting on the 12-row unit, and the separate frame for the 11-row unit, ensures high capacity crop trash clearance. The fully independent contour following hitch on the 11-row ensures accurate row spacing on contours. A heavy duty row unit moves planter reliability to a new level in difficult no-till conditions and offers patented Seed-lokseed firming wheels. Both units have ground gauging at the seed tube to allow accurate seed depth placement. Optional liquid fertilizer integral with the 12-row allows accurate fertilizer placement. Great Plains Mfg., Assaria, KS, USA; 913-667-7763.

AE50/ 13

Sector Site-Specific Computer Controls Liquid Spraying
he Sector was developed by three individual companies that shared expertise to create a computer system combining site-specific agricultural needs into one system. The Sector controls liquid spraying of fertilizer and crop protection products for application precisely to the crop. A global positioning system allows agronomists to program the Sector to change rates in various parts of the field. This maximizes crop production without over applying products where they are not needed. Sector records the application rate for operators using global positioning. Injection pumps are controlled so products can be delivered to the field without mixing concentrated chemicals with the main bulk tank. This eliminates the need for in-field tank rinsing. Willmar Manufacturing, Willmar, MN, USA; 320-231-9400.
Model 996 Corn Head is Faster and More Efficient than Older Models
ew Hollands Model 996 Corn Head is designed to give operators more corn in less time when used on the New Holland TRTM 88 and TRTM 98 Twin Rotor combines, New Holland TXTM 66 and TXTM 68 combines or the New Holland FX Series self-propelled forage harvesters. The new-generation design and polyethylene construction enable the operator to get under more downed corn, travel faster and lose fewer ears of corn than with a conventional corn head. The polyethylene also eliminates rust and any need for repainting. Lightweight shielding is designed for easy servicing, transport and storage with quick latches and props. A unique two-piece cantilevered stalk roll design is implemented in a heat-treated, straight-fluted component that requires only one bolt to install or remove. This makes it easy to change between standard and knife-

Model 1780 Planters Give Operators a Complete 20-In. Cropping System
he Model 1780 Planters are two 40-ft. working-width, narrow row precision planters from John Deere Seeding Group. The Model Row 20 inch Planter was introduced with a 12-row, 20-in. corn head and a 24-row, 20-in. cultivator to make Deere the first provider of a complete 20-in. cropping system. The Model Row/31 Row, plants row crops in 30- or 15-in. row spacing. Both are equipped with MaxEmerge Plus row units and new SeedStar frame control for fold-and-go transport from the tractor cab. The SeedStar monitoring system offers direct control of the new optional variable on-the-go seeding rate adjustment. A single point adjustment pneumatic down force makes adjusting down force for changing soil conditions quick and easy. These threesection, flexing machines can be equipped with vacuum, plateless or the new Radial Bean Metering systems. John Deere Seeding Group, Moline, IL, USA; 309-765-2077.

AE50/ 16

1431 Discbine Disc Mower-Conditioner Maximizes Length of Windrow
ew Hollands Model 1431 Discbine Disc MowerConditioner is a highly maneuverable machine. The center pivot tongue swings 38.5 to the left and right from a center position to give maneuverability and performance from either side of the tractor. A field can be cut back and forth along its length vs. in a diminishing circular pattern, maximizing the length of the windrow and minimizing the number of turns when harvesting. Also, the operator can shift the tongue, while he or she continues to cut, on-the-go for steering around field obstacles. The dual V-belt cutter bar drive minimizes shock loads to the driveline, and power is split between both ends of the unique modular disc cutter bar to increase reliability and durability. This machine uses 10 mod-
ular discs with a 3.9-m (13-ft.) cutting width and has 2.6-m (102-in.) intermeshing rolls. New Holland North America, Inc., New Holland, PA, USA; 717-355-3656.
Case IH Quadtrac Improves Farm Productivity
ases Quadtrac is a unique new product with many advantages over current 4WD tractors and other steel and rubber tracked agricultural vehicles. The Quadtrac is an articulated tractor featuring four independently mounted track assemblies that replace the tires on conventional 4WD models. The track assemblies independently oscillate to follow ground contours. This feature, along with conventional articulated 4WD chassis oscillation, minimizes soil compaction, maximizes traction and improves the ride. The vehicle is 10 ft. wide, which is narrower than typical wide dual and triple tire equipment on 4WD tractors. Quadtrac allows less ground pressure, operating at about 5 psi. Less ground pressure improves farm productivity by increasing yields. Quadtrac rubber tracks improve traction in all conditions allowing earlier access to fields and operation in marginal soil conditions. Case Corp., Fargo, ND, USA; 701-293-4400.

AE50/ 17

Series KP Dewatering Screw Presses Score High in Performance Tests
incent Series KP Dewatering Screw Presses separate manure into manageable flows of screened liquid and bulk solids. The stainless steel screw press features rugged simplicity with low acquisition and maintenance costs. Hard surfacing is applied to high wear areas. Gear boxes were selected for continuous long-term operation. Remarkable performance was achieved in tests at the U.S. Dairy Forage Research Center and University of Wisconsin. The Model KP10 processes 50 gpm of dairy manure with a separation of 43 gpm liquid. Inbound solids were split evenly with 50% in the press liquid and 50% in the press cake. Press cake moisture content measured 72%. Using the Series KP screw press changes waste management to nutrient utilization. Recycling manure as a soil additive improves sanitation, reduces odor pollution and controls groundwater contamination. At the same time, a valuable resource is returned to the soil as a nutrient. Vincent Corp., Tampa, FL, USA; 813-2482650.
Environmental Concerns Addressed by Gehl Scavenger Spreaders
ehl Scavenger spreaders transport and spread agricultural, municipal and industrial waste of liquid and solid consistencies. The round core segmented conveying auger breaks up and blends waste materials as it delivers the necessary charge to the discharge expeller. Auger segment paddle leading edge curvature and shape, combined with the round core and helical pattern, resist material build-up and wrapping of stringy, long-stem materials. Double acting hydraulic cylinders move the conveyor auger up and down to break any bridged material in the V-shaped tank. Reversible square-toothed paddles on the discharge expeller rip, shred and propel material with an overshot trajectory, delivering it in a uniform spread pattern. The improved application rate control allows for land applications consistent with nutrient requirements and environmental concerns. Adjustable retainers on tank slides and gate help

maintain a liquid seal. Self-contained warning lights connected to the standard seven-pin receptacle provide safety identification for highway transport. Gehl Co., West Bend, WI, USA; 414-334-6676.

AE50/ 18

Gallenberg FieldMaster Harvester Separates Rocks, Dirt and Trash
allenbergs FieldMaster Harvester was designed to increase the efficiency of potato harvesting, increase crop quality and reduce operator fatigue. The machine can dig three, four or six rows. The unique dual airhead increases capacity and balances weight distribution. A well thought out process separates rocks, dirt and trash to allow for product flow efficiency. A simple, clean hydraulic design provides well balanced flows and pressures. Logical component placement streamlines the size and weight, eliminating awkwardness and making it easy for the driver to operate. The unit has the potential to replace two tractors and
two windrowers. Gallenberg Equipment Inc., Antigo, WI, USA; 800-533-2662.
7000 Series Ranger Self-Propelled Sprayer Provides Maximum Value
he Willmar Ranger is used to produce a broad range of crops, including vegetables, small grains and row crops, by providing precise, timely fertilizer and crop protection product application. The Ranger uses the latest technologies to achieve operator safety and comfort in its custom designed cab. The machines Field Sensor suspension system, combined with boom suspension, provides stability for precisely placing materials for maximum value. A high horsepower-to-weight ratio produces the extra power needed to operate in tough conditions. New Steerite steering gives operators complete machine control. The on-board computer controls spraying to ensure products are applied properly to crops. Combining these features with simple, yet highly reliable, hydraulic systems yields a versatile machine. Willmar Manufacturing, Willmar, MN, USA; 320-231-9400.

AE50/ 19

Accurate, Easy to Use Case IH Variable Rate Controller Adjusts in the Cab
ew Advanced Farming System Variable Rate Controller, when installed on the Case IH Early Riser planter, allows the operator to make on-the-go changes to seed population rates. This hydraulically driven system is accurate, easy to operate and features a console that mounts in the tractor cab. To operate, simply program the console to your target population, then change seeding rates as you go. Electronic signals from the Variable Rate Controller adjust a flow-control valve, which speeds or slows the hydraulic motor located on the seed module. The Variable Rate Controller allows for stationary operation of the seed drum, simplifying checks of the seed drum brush, and cutoff wheel adjustments. Case Corp., Burr Ridge, IL, USA; 630-8872241.

AE50/ 21

Auto Lok Yoke Offers Hands-Free Locking System Operation
uto Lok yoke is intended for use on large or heavy drivelines where better weight support is necessary for ease of connection to the tractor PTO shaft or connecting shaft. The design allows hands-free operation of the locking mechanism, permitting the operator to position hands for better support of driveline weight. A spring-loaded metal slide collar is used, along with a unique pawl design with high thrust capacity. When the collar is pulled back, it temporarily locks into a released position, which allows the hands to be repositioned. When the tractor PTO shaft or connecting shaft is inserted into the yoke bore, the collar automatically releases to lock the yoke onto the shaft. The yokes are available in 1.375-6, 1.375-21 and 1.750-20 spline bores. Weasler Engineering, Inc., West Bend, WI, USA; 414-338-2161.
7000 Ten Series Tractors are Improved to Meet the Global Customers Needs
he 7000 Ten Series row crop tractors offered by John Deere replace the 7000 Series product line. The new models are 95, 105, 115, 130 and 150 PTO hp. They offer a number of improvements to better meet worldwide customer needs. The 7000 Ten Series has increased horsepower, left hand reverser on Power Quad, load sensing for improved shifting on power shift, improved lighting and improved air conditioning performance. These tractors feature the new John Deere Power Tech 6.8-L and 8.1-L engines developed to meet government emission regulations for 1997 and beyond. Both engines provide improved durability and performance. The 6.8 L has up to 38% torque rise and the 8.1 L has up to 50% torque rise. John Deere Product Engineering Center, Waterloo, IA, USA; 319-292-8218.

AE50/ 22

HighLander Can Be Adjusted by One Person Using Minimal Tools
illmars HighLander is a high clearance adjustable track fertilizer spreader designed to enable fertilizer dealers to get more use from one spreader. The 30in. crop clearance allows producers to spoon feed fertilizer requirements throughout the growing season. Applying fertilizer in smaller amounts during the growing season, rather then applying total fertilizer requirement at pre-emergence, has advantages. The lower application rate is absorbed by the crop before it can leach or run off. If weather conditions are unfavorable, additional fertilizer inputs are not necessary. The wheel track is adjustable from 72 to 120 in. to allow for row spacing. The simple design allows adjustment by one person with minimum tools in a short time period. No drivelines, chains or assemblies need adjustment after the wheel track is set. Willmar Manufacturing, Willmar, MN, USA; 320-2319400.

AE50/ 24

Flexi-Coil 6000 No-Till Air Drill Offers Ultra-Low Disturbance
lexi-Coils 6000 NoTill Air Drill is an ultralow disturbance seeding tool. The 6000 No-Till Air Drill has a two-bar frame with a hitch that is rigid in transport but free-floating in field position. Barton Angle Disc openers are mounted on the 7- 7-in. frame in either a 10- or 7.5-in. spacing configuration. The patented Barton opener features an 18-in. disc blade mounted at a compound angle to cut crop residues easier and penetrate soil with less down pressure. A cleaning wheel keeps soil from moving up and away from the blade, forming a slot for seed placement. A V-shaped press wheel follows the blade, pressing at the opposite angle to completely close the slot, leaving
little soil disturbance. The 6000 No-Till Air Drill has reduced tillage applications in dryland farming worldwide. Flexi-Coil, Saskatoon, Saskatchewan, Canada; 306-934-3500.
Six Series Round Balers Work Under Wet or Other Difficult Conditions
he new John Deere Six Series Round Balers form bales ranging from 750 to 2,400 lbs. and include new features for increased capacity, easier operation and improved quality. The mega tooth pickup is a first in round baler pickups. With extra-stiff teeth and heavy-duty components, it offers customers faster bale starting and improved feeding, especially in wet or difficult baling conditions. The BaleTrak Plus monitor/controller combines more than 20 functions with a simple-to-operate, user friendly interface. It provides the convenience of a preprogrammed baling cycle with the flexibility to individually adjust each setting as crop conditions change. New belt fasteners include the extra service life rectangular wire fastener and a new riveted plate-type fastener to handle heavier bales and increase pull-out strength. Six Series balers use John Deere diamond tread forming belts to enclose more than 90% of the bale, to shape tight bales and retain hay quality. John Deere Ottumwa Works, Ottumwa, IA, USA; 800-50DEERE.

AE50/ 27

Published by ASAE The Society for engineering in agricultural, food, and biological systems 2950 Niles Road, St. Joseph, MI 49085-9659 USA 616-429-0300 fax: 616-429-3852 hq@asae.org

COMPLETE AND SEMI-COMPLETE HAYMAKING OPERATIONS 2009
Region County Custom Charge Operation Equipment
John Deere 2wd or fwa 125-130 hp tractor, New Holland BR S Cypress $13.50-14.50/bale BS 780 or John Deere 567 baler - large round bales, John Deere 7710 fwa 130 hp tractor, Inland bale wagon holds 7 large round bales S Cypress $21.50-22.00/acre MCR John Deere 4250 2wd 130 hp tractor, John Deere 945 discbine 14' wide, 12-wheel double swath V-rake Massey Ferguson 100 hp or Fendt hp tractor, New S Foothills MD 31 $1.50/bale BS Holland 575 baler - 14x18 bales, Sp New Holland 1069 bale wagon holds 160 14x18 bales Massey Ferguson 100 hp or Fendt hp tractor, S Foothills MD 31 $10.00/bale BS Hesston 4755 baler - 31"x34"x8' bales, Highline Bale Pro bale stacker holds 12 31"x34"x8' bales Massey Ferguson hp tractor or Fendt hp S Foothills MD 31 $21.50/acre MCR tractor, New Holland 116 haybine 16' wide, New Holland 258 & 260 unitized in tandem V-rake S Foothills MD 31 $24.50/acre MCR Sp Hesston 8550 or Massey Ferguson discbine 15' wide, Case hp tractor, Vermeer R23 rake 23' wide Ford hp tractor, Hesston 4655 baler - 16x18 bales, Sp New Holland 1089 bale wagon holds 160 16x18 bales John Deere hp tractor, Hesston 4790 baler 3'x'4x8' bales, bale truck holds 6 3'x4'x8' bales John Deere hp tractor, New Holland 1431 discbine 13.5' wide, V-Rake 26' wide Sp Hesston 8550 or Massey Ferguson discbine 15' wide, Case hp tractor, Vermeer R23 rake 23' wide Sp Hesston 8550 or Massey Ferguson discbine 15' wide, Case hp tractor, Vermeer R23 rake 23' wide White 2-105 tractor, Massey Ferguson 1665 baler - large C Bighorn MD 8 $14.00/bale BH round bales 1,500-1,800 lbs, fifth wheel trailer holds 15 large round bales ~16-20 bales/hour - B Mowing and conditioning, then raking Mowing and conditioning, then raking Baling, then on field stacking Baling, then on field stacking Mowing and conditioning, then raking; charges extra for rough fields/terrain Baling, then on field stacking

Rate of Work

Lethbridge

$1.05/bale

Baling, then on field stacking

Taber MD

$16.50/bale

$22.00/acre

Mowing and conditioning, then raking

Vulcan

$24.50/acre

Wheatland

Baling, then hauling up to 5 miles; plus $1.00/bale/mile over 5 miles up to 40 miles
Legend: S - South C - Central NE - North East NW - North West P - Peace B - Baling BH - Baling & long distance hauling BS - baling & stacking on field or short distance hauling MC - mowing/conditioning MCR - mowing/conditioning & raking MCRB - mowing/conditioning, raking & baling MCRBHS - mowing/conditioning, raking, baling, hauling & stacking R - raking RB - raking & baling 2wd - 2 wheel drive 4wd - 4 wheel drive fwa - front wheel assist hp - horse power lbs - pounds Pt - pull type Sp - self-propelled ton (2,000 lbs) tonne (2,204.6 lbs) Note: No observations were obtained for the North East, North West and Peace Regions. Custom charges include fuel and twine, unless otherwise stated.
International Harvester hp tractor, Hesston 565A C Bighorn MD 8 $16.50/bale BH baler - large round bales up to 2,400 lbs, fifth wheel trailer holds 15 large round bales C Bighorn MD 8 $38.00-40.00/acre MCR Sp International Harvester 5000 swather with 12' header, White 2-105 tractor, Massey Ferguson 6-wheel rake 16' wide White 2-105 tractor, Massey Ferguson 1665 baler - large C Clearwater $14.00/bale BH round bales 1,500-1,800 lbs, fifth wheel trailer holds 15 large round bales International Harvester hp tractor, Hesston 565A C Clearwater $16.50/bale BH baler - large round bales up to 2,400 lbs, fifth wheel trailer holds 15 large round bales C Clearwater $38.00-40.00/acre MCR Sp International Harvester 5000 swather with 12' header, White 2-105 tractor, Massey Ferguson 6-wheel rake 16' wide Deutsche 7120 125hp tractor, New Holland 489 haybine 9' C Clearwater $60.00/hour MCRB wide, Massey Ferguson hp tractor, Tonutti 350 rotary rake 14' wide, or Farmhand rake 10' wide, New Holland 664 baler - large round bales Ford hp tractor, Hesston 12-wheel rake 30' wide, C Kneehill $13.00/bale RB John Deere hp tractor, John Deere 567 baler large round bales C Kneehill $24.50/acre MCR Sp Hesston 8550 or Massey Ferguson discbine 15' wide, Case hp tractor, Vermeer R23 rake 23' wide John Deere hp or John Deere hp tractor, C Lacombe $1.00-1.10/bale BS John Deere 348 baler - 14x18 bales, Sp New Holland 1069 bale wagon holds 178 14x18 bales White hp tractor with double hitch, 2 John Deere C Mountain View $1.00/bale BS 348 balers (at same time) - 14x18 bales, Sp New Holland 1069 bale wagon holds 160 14x18 bales John Deere hp or John Deere hp tractor, C Mountain View $1.00-1.10/bale BS John Deere 348 baler - 14x18 bales, Sp New Holland 1069 bale wagon holds 178 14x18 bales Baling, then on field stacking; plus $0.05/bale/mile up to 3 miles ~700 bales/hour - B Baling, then on field stacking Mowing and conditioning, then raking Raking, then baling ~33 bales/hour - B Mowing and conditioning, raking, then baling ~8-10 acres/hour - MC ~9-10 acres/hour - R ~16-20 bales/hour - B ~16-20 bales/hour - B ~8-10 acres/hour - MC ~9-10 acres/hour - R ~16-20 bales/hour - B

Baling, then on field stacking; plus $0.05/bale/mile up to 3 miles
John Deere 4650 2wd 140 hp tractor, New Holland 575 baler C Mountain View $1.10/bale BS 14x18 bales, Sp New Holland 1069 bale wagon holds 160 14x18 bales White 2-105 tractor, Massey Ferguson 1665 baler - large C Mountain View $14.00/bale BH round bales 1,500-1,800 lbs, fifth wheel trailer holds 15 large round bales International Harvester hp tractor, Hesston 565A C Mountain View $16.50/bale BH baler - large round bales up to 2,400 lbs, fifth wheel trailer holds 15 large round bales C Mountain View $22.00/acre MCR Sp New Holland sickle bar mower-conditioner 14' wide, John Deere hp tractor, PTO driven rotary rake Sp Hesston 8550 discbine with high pressure rolls, John Deere hp tractor, Miller Pro double rotary rake Sp International Harvester 5000 swather with 12' header, White 2-105 tractor, Massey Ferguson 6-wheel rake 16' wide Deutsche hp tractor, New Holland 489 haybine 9' C Mountain View $60.00/hour MCRB wide, Massey Ferguson hp tractor, Tonutti 350 rotary rake 14' wide or Farmhand rake 10' wide, New Holland 664 baler - large round bales John Deere hp or John Deere hp tractor, C Ponoka $1.00-1.10/bale BS John Deere 348 baler - 14x18 bales, Sp New Holland 1069 bale wagon holds 178 14x18 bales John Deere hp or John Deere hp tractor, C Red Deer $1.00-1.10/bale BS John Deere 348 baler - 14x18 bales, Sp New Holland 1069 bale wagon holds 178 14x18 bales John Deere 4455 2wd 150 hp tractor, John Deere 567 baler C Red Deer $11.00/bale BS large round bales, Inland 2000 bale wagon holds 14 large round bales White 2-105 tractor, Massey Ferguson 1665 baler - large C Rocky View MD 44 $14.00/bale BH round bales 1,500-1,800 lbs, fifth wheel trailer holds 15 large round bales ~16-20 bales/hour - B Baling, then hauling up to 5 miles; plus $1.00/bale/mile over 5 miles up to 40 miles Baling, then on field stacking Baling, then on field stacking; plus $0.05/bale/mile up to 3 miles ~33 bales/hour - B Mowing and conditioning, raking, then baling ~16-20 bales/hour - B ~16-20 bales/hour - B Baling, then hauling up to 5 miles; plus $1.00/bale/mile over 5 miles up to 40 miles Baling, then on field stacking; plus $0.04/bale/mile

Mountain View

$25.00/acre

~12 acres/hour - MC

$38.00-40.00/acre
~8-10 acres/hour - MC ~9-10 acres/hour - R
International Harvester hp tractor, Hesston 565A C Rocky View MD 44 $16.50/bale BH baler - large round bales up to 2,400 lbs, fifth wheel trailer holds 15 large round bales Case hp tractor, Case-IH 8545 baler or John Deere C Rocky View MD 44 $1.30/bale BS 348 baler - 14x18 bales, Sp New Holland 1069 bale wagon holds 177 14x18 bales or tractor, Pt New Holland 1063 bale wagon holds 177 14x18 bales C Rocky View MD 44 $12.00/bale BS White hp tractor, Hesston 565 baler - large round bales, Highline 1400 bale wagon holds 14 large round bales Sp Hesston 8550 or Massey Ferguson discbine 15' wide, Case hp tractor, Vermeer R23 rake 23' wide Case hp tractor, Case-IH 8360 hydro-swing haybine C Rocky View MD 44 $25.00/acre MCR 12' wide or New Holland 499 haybine 12' wide, Ford hp tractor, V-rake 14' wide with 3 point hitch C Rocky View MD 44 $38.00-40.00/acre MCR Sp International Harvester 5000 swather with 12' header, White 2-105 tractor, Massey Ferguson 6-wheel rake 16' wide Ford hp tractor, Hesston 12-wheel rake 30' wide, C Rocky View MD 44 $13.00/bale RB John Deere hp tractor, John Deere 567 baler large round bales Legend: S - South C - Central NE - North East NW - North West P - Peace B - Baling BH - Baling & long distance hauling BS - baling & stacking on field or short distance hauling MC - mowing/conditioning MCR - mowing/conditioning & raking MCRB - mowing/conditioning, raking & baling MCRBHS - mowing/conditioning, raking, baling, hauling & stacking R - raking RB - raking & baling 2wd - 2 wheel drive 4wd - 4 wheel drive fwa - front wheel assist hp - horse power lbs - pounds Pt - pull type Sp - self-propelled ton (2,000 lbs) tonne (2,204.6 lbs) Note: No observations were obtained for the North East, North West and Peace Regions. Custom charges include fuel and twine, unless otherwise stated. Raking, then baling ~8-10 acres/hour - MC ~9-10 acres/hour - R Mowing and conditioning, then raking Mowing and conditioning, then raking Baling, then on field stacking Baling, then on field stacking or hauling up to 1 mile ~16-20 bales/hour - B

Rocky View MD 44