IMPRESSA F90 Instructions for use

Art. Nr. 63213

11/2001

Jura Impressa F90

English. 6 123

Legend:

= Note DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Important = Tip Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.juraworld.com

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 7

Fig. 6

Fig. 8

Fig. 9

Fig. 10

Control elements

A) B) C) D) E) F) G) H) I) Display dialog system Symbols (navigation in programming mode) Large cup Coffee Espresso Start (to start the draw-off operation) Coffee strength mild Coffee strength Normal Coffee strength strong Programming key Selection key for pre-ground coffee Draw-off key 1 cup Draw-off key 2 cups ON/OFF key Maintenance key Connectivity socket Control panel Filler funnel key for pre-ground coffee Bean tank cover Water tank with handle Water portion draw-off key Steam portion draw-off key Replaceable steam / frothing nozzle(Fig. 7) Replaceable hot water nozzle Height-adjustable coffee spout Cup illumination (Fig. 10) Coffee grounds container Drip grate Drip tray Sensitive Touch Screen Technology B) 8 A) 8 C) D) E) F) G) H) I)

14/19 20

PROGRAMMATION

Contents

1. Description of control panel..page 2. Safety information..page 2.1 Warning..page 2.2 Precautions..page 3. Preparing the coffee machine for use..page 3.1 Check the mains voltage.page 3.2 Check electrical fuse.page 3.3 Refill water..page 3.4 Filling the bean tank.page 3.5 Adjusting the grinding gear.page 4. First use...page 4.1 Cup illumination..page 5. Adjustment of water hardness.page 6. Installation of Claris filter cartridges..page 6.1 Installing the filter..page 6.2 Replacing the filter..page 7. Rinsing the coffee machine..page 8. Drawing off coffee..page 8.1 Drawing off espresso.page 8.2 Drawing off a large cup of coffee.page 8.3 Drawing off pre-ground coffee.page 9. Drawing off hot water..page 10. Drawing off steam..page 11. Switching off the coffee machine..page 12. Programming..page 12.1 Programming the filter..page 12.2 Programming the water hardness.page 12.3 Programming the aroma INTENSIVE or STANDARD..page 12 13
Programming the temperature..page Programming the water quantity.page Programming 1 cup..page Programming the steam portion.page Programming the water portion.page Programming the time.page Programming the automatic switch-on time..page 12.11 Programming the automatic switch-off time..page 12.12 Cup counter..page 12.13 Programming the language..page 12.14 Connectivity..page 13. Maintenance..page 13.1 Refilling water.page 13.2 Emptying the coffee grounds container.page 13.3 No Drip tray..page 13.4 Filling the bean tank..page 13.5 Replacing the filter..page 13.6 Cleaning the coffee machine..page 13.7 Coffee machine calcified..page 13.8 General cleaning instructions..page 13.9 Regular service.page 13.10 Emptying the system..page 14. Cleaning..page 15. De-scaling...page 16. Disposal..page 17. Tips for perfect coffee..page 18. Messages...page 19. Problems...page 20. Legal information...page 21. Technical data...page 12.4 12.5 12.6 12.7 12.8 12.9 12.10

Important information

Thank you very much for purchasing this Impressa coffee machine. Before using your new coffee machine for the first time, carefully read this operating manual and keep it for future reference. Should you need more information or if you meet with particular problems not specified in these operating instructions in sufficient detail, either contact us directly or contact your local authorized dealer.

2.2 Precautions

Never expose the coffee machine to weather (rain, snow, frost), never touch the machine when your hands are wet. Install the machine on a stable and level surface. Never place your machine on hot or warm surfaces (cooktops). Make sure the machine is installed at a place not accessible to children or pets. If you dont use the machine for a longer time (holidays, etc.) always disconnect the mains cable. Always disconnect mains cable before cleaning the machine. When disconnecting the mains cable never pull on the mains cable or the machine itself. Never repair or open the coffee machine yourself. Any repairs may only be carried out by authorized service shops using original spare parts and accessories. The coffee machine is connected to mains supply via a mains cable. Make sure nobody can trip over the mains cable. Make sure children and pets cannot reach the machine Never put the coffee machine or individual parts of it into a dishwasher. Make sure to install the machine at a place with sufficient air circulation, to prevent overheating of the machine.
1. Description of control panel
A gentle push on the control panel will do, and the sensors will read your wish from your fingertips. The Impressa F90 offers Caf la Carte, coffee to the taste of everybody. You can select one of the programmed coffee specialities at a gentle touch on the touch screen. As a result of high electromagnetic interference, the touch screen may become inactive. All the remaining draw-off keys, the selection key for pre-ground coffee, draw-off key 1 cup, draw-off key 2 cups, can still be used.
2. Safety information 2.1 Warning
Children do not realize the dangers involved in using electric appliances, for this reason always keep an eye on children when they use electric appliances. The coffee machine may only be used by instructed persons. Never use a defective coffee machine or a machine with a defective mains cable. Never immerse the coffee machine in water.
3. Preparing the coffee machine for use 3.1 Check the mains voltage
The coffee machine is preset in the factory to the correct mains voltage. Check if your local mains supply voltage complies with the information given on the type plate on the underside of the coffee machine.
3.2 Check electrical fuse
The coffee machine is designed for an electric current of 10 Ampres. Check if the electrical fuse has sufficient capacity.

Open the cover of the bean tank (10). To adjust the grinding degree turn the rotary switch (Fig. 2) to the required position.

3.3 Refill water

Only use fresh, cold water. Never fill in milk, mineral water or other liquids. Take out the water tank and thoroughly rinse it with cold tap water (Fig. 1). Then fill the water tank and re-install it in the coffee machine. Make sure the tank is installed correctly and that it engages properly.

4. First use

Fill coffee beans in the bean tank (10). Fill water tank. Switch on your coffee machine using the key. WWW.IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP FILL SYSTEM / WATER PORTION Place an empty cup under the hot water nozzle (15). Press water portion draw-off key SYSTEM FILLING MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT Press symbol. COFFEE NORMAL If FILL BEANS is displayed, touch the symbol again. The mill was still empty. To get an excellent froth, adjust the coffee spout (16) to the size of your cup (Fig. 3 ).
3.4 Filling the bean tank
Open the cover of the bean tank (10). Remove any dirt or foreign matter from the bean tank. Fill coffee beans in the bean tank and close the cover.
3.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We recommend that you use a fine adjustment (the smaller the dots, the finer the grinding is) for a light roast a coarse adjustment (the bigger the dots, the coarser the grinding is) for a dark roast The grinding degree may only be adjusted while the grinding gear is running.

4.1 Cup illumination

The cup illumination puts your coffee in a good light, making it a treat for the eyes. When you plug in or switch on the machine or press any key, the cup illumination is activated for 1 minute. To switch on the cup illumination, with the machine switched off, press any key (Fig. 10).
When the machine leaves the factory it is adjusted to WATER HARDNESS 3. You can adjust another hardness. To do this, proceed as follows: Pull out the mains cable from the cable box on the rear side of the coffee machine and connect the machine to mains supply. Press the key to switch on the coffee machine. WWW.IMPRESSA-F-LINE.COM Your coffee machine is switched to start-up position. HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT Press programming key until you hear an acoustic signal. FILTER NO Press symbol until the following message is displayed: WATER HARDNESS 3 Press symbol , you will hear an acoustic signal and the hardness degree flashes. Now, press symbols to adjust the required hardness degree. Press symbol to confirm the new settings. WATER HARDNESS 4 Press programming key to leave Programming Mode. PLEASE SELECT

5. Adjustment of water hardness
In the coffee machine water is heated up. As a result, calcification occurs during normal use and is indicated automatically. Before using the machine for the first time the hardness of the water used must be adjusted. Use the supplied test sticks for this. 1 German hardness is equivalent to 1.79 French hardness. The coffee machine has 5 hardness degrees which can be used and are displayed while you are adjusting the water hardness. The displayed information means the following: WATER HARDNESS Water hardness function switched off WATER German water hardness degree 1 to 7 HARDNESS 1 French Water hardness degree 1.79 12.53 WATER German water hardness degree 8 to 15 HARDNESS 2 French Water hardness degree 14.32 26.85 WATER German water hardness degree 16 to 23 HARDNESS 3 French Water hardness degree 28.64 41.14 WATER German water hardness degree 24 to 30 HARDNESS 4 French Water hardness degree 42.96 53.7
6. Installation of Claris filter cartridges
If the Claris filter cartridge is installed properly, de-scaling of the coffee machine is no longer required. For more information on the Claris filter cartridge refer to brochure Claris. Hard on limescale. Gentle on your coffee machine.
PLEASE SELECT Now you have activated the filter. In Programming Mode the water hardness selection function is no longer displayed.

6.2 Replacing the filter

REPLACE FILTER / PLEASE SELECT Use the key to switch off the coffee machine. GOOD BYE Press maintenance key for some seconds, with the machine switched off. INSTALL FILTER / WATER PORTION Fold up the cartridge holder. Insert the filter cartridge in the water tank (Fig. 4) Close the cartridge holder until it engages audibly. Fill the water tank with cold, fresh tap water and reinstall it in the coffee machine. Place a sufficiently large jug (approx 1 litre) under the hot water nozzle (15) and press the draw-off key. FILTER RINSING. The water draw-off operation is stopped automatically. MACHINE HEATING UP PLEASE SELECT
6.1 Installing the filter
Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT Fold up the cartridge holder. Insert the filter cartridge in the water tank (Fig. 4) Close the cartridge holder until it engages audibly. Fill the water tank with cold, fresh tap water and install it again. Press Programming key until you hear an acoustic signal. NO FILTER Press symbol , NO flashes on the display. until the following message is displayed: Press symbol FILTER YES (YES flashes) Press symbol. INSTALL FILTER / WATER PORTION Place a sufficiently large jug (approx 1 litre) under the hot water nozzle (15) and press the water portion draw-off key. FILTER RINSING. The water draw-off operation is stopped automatically. MACHINE HEATING UP

7. Rinsing the coffee machine
When the coffee machine was switched off and has cooled down in the meantime, a rinsing operation is started when the machine is switched on again. When the machine is switched off, a rinsing operation is started automatically.
Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT

8.1 Drawing off espresso

Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT Place 1 cup under the adjustable coffee spout (16) and press symbol. ESPRESSO NORMAL Press ( / / ) to select the strength of your espresso. ESPRESSO STRONG Press symbol. ESPRESSO STRONG. Your product is being prepared. PLEASE SELECT

8. Drawing off coffee

You can change the selected product at any time by pressing the symbols before starting the operation by pressing. The selected product is displayed. Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT Place 1 cup under the adjustable coffee spout (16) and press symbol. COFFEE NORMAL Press symbols ( / / ) to select the strength of your coffee. COFFEE STRONG Press symbol. COFFEE STRONG Your product is being prepared. PLEASE SELECT
8.2 Drawing off a large cup of coffee
Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT Place 1 cup under the adjustable coffee spout (16) and press symbol. LARGE CUP NORMAL Press ( / / ) to select the strength of your coffee.
LARGE CUP MILD Press symbol. LARGE CUP MILD Your product is being prepared. PLEASE SELECT
LARGE CUP POWDER Your powder coffee is being prepared. Display:PLEASE SELECT

9. Drawing off hot water

You can adjust the water portion individually (see Chapter 12 Programming). Install the hot water nozzle (Fig. 7) to obtain perfect water flow. At the start of the water draw-off there can be splashing Avoid direct contact with the skin! Do not replace the hot water nozzle directly after drawing off water, because the nozzle is hot after the draw-off operation. Place a cup under the hot water nozzle (15). Press water draw-off key. WATER PORTION The programmed portion is being prepared. You can stop the draw-off operation at any time by pressing the draw-off key. PLEASE SELECT

8.3 Drawing off pre-ground coffee
Never use instant coffee or quick-coffee. We recommend that you always use powder from fresh coffee beans or, preground, vacuum-packed coffee. Never fill in more than 2 portions of powder. The pre-ground coffee tank is no storage tank. Make sure that the pre-ground you use is not too fine. This may cause blocking of the system. In this case the coffee only drips out of the coffee spout. If you press the draw-off key unintentionally, you can stop the operation by pressing the maintenance key. Your coffee machine will carry out a rinsing operation. Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT Press selection key. FILL IN POWDER / PLEASE SELECT Now fill in 1 or 2 level dosing spoonfuls of pre-ground coffee in the filler funnel for pre-ground coffee (Fig. 5). Place 1 cup under the adjustable coffee spout (16) and press the corresponding symbol ( / / ). LARGE CUP POWDER Press symbol.

10. Drawing off steam

Steam can be used for heating liquids and frothing milk for cappuccino. Make sure that the steam/frothing nozzle (14) is pushed upwards when liquids are heated. Push down the frothing aid (Fig. 7) to froth liquids. If you do not draw off steam within 3 minutes, steam drawoff mode is terminated. Install the steam/frothing nozzle (Fig. 7). This is included in your Welcome Pack.
During frothing some water will escape the system before the actual steam draw-off. This does not affect the result, e.g. when frothing milk. At the start of the water draw-off there can be splashing The steam nozzle becomes hot. Avoid direct contact with the skin! Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING: PLEASE SELECT Press steam portion draw-off key. MACHINE HEATING UP PLEASE SELECT Place a cup under the steam/frothing nozzle (14) and immerse the frothing aid in the milk to be frothed or the liquid to be heated. again. Press steam draw-off key STEAM PORTION. Your product is being prepared. You can stop the draw-off operation at any time by pressing the steam draw-off key. PLEASE SELECT

12. Programming

When your coffee machine leaves the factory it is adjusted such that you can draw off coffee without having to change any settings. However, you can programme various parameters individually. You can programme the following stages: Filter Water hardness Aroma Temperature Water quantity for coffee 1 Cup Steam portion Water portion Time Automatic switch-on time Automatic switch-off time Draw offs Language

12.1 Programming the filter
Refer to Chapter 6.1 Inserting the filter.
12.2 Programming the water hardness
Refer to Chapter 5 Adjusting the water hardness.
11. Switching off the coffee machine
Use the key to switch on the coffee machine. PLEASE SELECT Use key to switch OFF your coffee machine. GOOD BYE The automatic rinsing operation is started.
12.3 Programming the aroma INTENSIVE or STANDARD
The aroma for the powder quantities ( / / ) was adjusted to Intensive in the factory. If requested it can also be set to Standard. Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING: PLEASE SELECT Press programming key until you hear an acoustic signal. Touch symbol until the following message is displayed: AROMA INTENSIVE Press symbol , you will hear an acoustic signal, INTENSIVE flashes. Use the symbols to adjust the aroma to STANDARD. Press symbol to confirm the new settings. AROMA STANDARD Use the symbols to reach the next programming stage or press programming key to quit Programming Mode.
Press programming key until you hear an acoustic signal. Touch symbol until the following message is displayed: TEMP. HIGH Press symbol , you will hear an acoustic signal and HIGH flashes. Use the symbol to adjust the temperature to NORMAL. Press symbol to confirm your settings. TEMP. NORMAL Use the symbols to reach the next programming stage or press programming key to quit Programming Mode.
12.5 Programming the water quantity
Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING: PLEASE SELECT Press programming key until you hear an acoustic signal. Press symbol until the following message is displayed: WATER QUANTITY Press symbol. SELECT PRODUCT Select the product, the water quantity of which you want to programme ( / / ) COFFEE 90 ML Press symbol , the value flashes. Use symbols to change the value in 5 ml increments. Press symbol to save the water quantity for this product.
12.4 Programming the temperature
WATER QUANTITY Use the symbols to reach the next programming stage or press programming key to quit Programming Mode.
12.7 Programming the steam portion
The programmable steam portion time is between 3 and 60 seconds. Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING: PLEASE SELECT Press programming key until you hear an acoustic signal. Press symbol until the following message is displayed: STEAM 20 SEC. Press symbol , the value 20 flashes. Press symbols to change the value. Press symbol to save the new value. STEAM 40 SEC (Example) Use the symbols to reach the next programming stage or press programming key to quit Programming Mode.

12.6 Programming 1 cup

Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING: PLEASE SELECT Press programming key until you hear an acoustic signal. Press symbol until the following message is displayed: 1 CUP 120 ML. Press symbol , the value flashes. Use symbols to change the value in 5 ml increments. Press symbol to save the water quantity for 1 cup. 1 CUP NORMAL Press one of the symbols ( / / ) to select the strength of your coffee. 1 CUP STRONG Press symbol to save the new settings. 1 CUP 180 ML (for example) Use the symbols to reach the next programming stage or press key to quit Programming Mode. These settings were taken over for the draw-off key for 2 cups.
12.8 Programming the water portion
Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT Press programming key until you hear an acoustic signal. Press symbol until the following message is displayed:
WATER PORTION Press symbol , you will hear an acoustic signal. PRESS KEY Press water portion draw-off key. ENOUGH WATER? PRESS MAINTENANCE. When the required water quantity is reached press key. The water draw-off operation is stopped, the water portion is programmed now. Use the symbols to reach the next programming stage or press programming key to quit Programming Mode.
Use symbols to adjust the minutes and confirm by pressing. The time is now programmed. Use the symbols to reach the next programming stage or press programming key to quit Programming Mode. If the machine is disconnected from mains supply, the time must be programmed again.
12.10 Programming the automatic switch-on time
You must programme the time (Chapter 12.9) if you want to use the automatic switch-on function. Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING: PLEASE SELECT Press programming key until you hear an acoustic signal. Press symbol until the following message is displayed: MACHINE ON : Press symbol , you will hear an acoustic signal and : flashes. Use the symbols to select the hours and confirm by pressing. Use symbols to adjust the minutes and confirm by pressing. The switch-on time is now programmed. to reach the next programming stage or Use the symbols press programming key to quit Programming Mode.

12.12 Cup counter

This function is available with the following products: In Aroma Select via symbols , , and via the preground coffee draw-off key , draw-off key for 1 cup and draw-off key for 2 cups. Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP

12.14 Connectivity

With the Connectivity system it is possible for your IMPRESSA F90 to communicate with your PC and the Internet. To use this feature, you will need a kit which you can order at www.impressaf-Line.com or your local authorized dealer. Available as from January 2002.

13.3 No Drip tray

NO TRAY If this information is displayed, the drip tray is not installed properly or was not installed at all. PLEASE SELECT
13. Maintenance 13.1 Refilling water
REFILL WATER If this information is displayed, drawing off products is no longer possible. Refill water as described in Chapter 3.3. PLEASE SELECT The water tank should be rinsed daily and refilled with fresh water. Only fill in fresh, cold water. Never fill in milk, mineral water or other liquids.
13.4 Filling the bean tank
REFILL BEANS We recommend that you clean the bean tank regularly before refilling beans, using a dry cloth. Before doing this, switch off the coffee machine. Refill beans as described in Chapter 3.4. The message REFILL BEANS will disappear after you draw off your next cup of coffee.
13.5 Replacing the filter
After drawing off 50 liters the filter cartridge will be used up. Refer to Chapter 6.2 Replacing the filter.
13.2 Emptying the coffee grounds container
EMPTY COFFEE GROUNDS CONTAINER If this information is displayed, drawing off products is no longer possible and the coffee grounds container must be emptied (Fig.8 ). Your coffee machine must be switched on. Carefully take out the drip tray, it is filled with water. NO TRAY PLEASE SELECT The red water level warning message appears when the coffee drip tray is full.
13.6 Cleaning the coffee machine
After 200 draw-off operations or after 160 rinsing operations, the coffee machine must be cleaned. A message appears on the display, telling you to start the cleaning programme. You can still draw off coffee or hot water/steam. However, we recommend that you should clean the machine (Chapter 14) within the next few days. CLEAN MACHINE / PLEASE SELECT
13.7 Coffee machine calcified
During normal use of the coffee lime scaling will occur. The degree of calcification depends on the hardness of the water you use. The machine will inform you when de-scaling is required. You can still draw off coffee or hot water/steam. However, we recommend that you should de-scale the machine (Chapter 15) within the next few days. MACHINE CALCIFIED / PLEASE SELECT

13.9 Regular service

Regular inspection carried out by the Jura Service will extend the service life and reliability of your machine. Keep the original packing for transport.
13.10 Emptying the system
This is necessary to protect the coffee machine against damage occurring during transport as a result of frost. Use the key to switch off the coffee machine. Place a jug under the pivoting nozzle (15). Press the steam portion draw-off key until the following message appears. Display:SYSTEM EMPTYING The coffee machine is switched off.
13.8 General cleaning instructions
Never use scrapers, abrasive cloths, sponges or caustic chemicals for cleaning. Clean the inside and outside of the case using a soft, moist cloth. Clean the pivoting nozzle each time it was used. Clean the control panel with a micro-fibre cloth. After heating milk, draw off some water to clean the inside of the pivoting nozzle. You can disassemble the frothing aid to clean it thoroughly (Fig. 9). The water tank should be rinsed daily and refilled with fresh water. If lime-scaling forms in the tank, remove it using a commercial de-scaling agent. Take out the water tank. If you use a Claris filter cartridge, remove it before descaling the tank.

14. Cleaning

The coffee machine features an integrated cleaning programme. The procedure takes some 15 minutes. Only use Jura cleaning tablets. These are available at your authorized dealer. Once started, the cleaning operation must not be interrupted. After each cleaning operation the filler funnel for the 2nd coffee type should be cleaned. CLEAN MACHINE / PLEASE SELECT Press maintenance key until the following message appears. EMPTY TRAY. Take out the tray, empty it and reinstall it. PRESS MAINTENANCE
Press maintenance key. MACHINE CLEANING TABLET / PRESS MAINTENANCE (Fig. 6). You will hear an acoustic signal. MACHINE CLEANING EMPTY TRAY. You will hear an acoustic signal. PRESS MAINTENANCE MACHINE CLEANING EMPTY TRAY. You will hear an acoustic signal. PLEASE SELECT Now the cleaning operation is complete.
MACHINE CALCIFIED / PLEASE SELECT Use the key to switch off the coffee machine. GOOD BYE Take out the water tank Press maintenance key until the following message appears. EMPTY TRAY AGENT IN TANK Completely dissolve the content of one blister (2 tablets) in a jug containing 0.5 liters of water, and fill the mixture in the water tank. Reinstall the water tank. Put a sufficiently large container under the hot water nozzle (15). PRESS MAINTENANCE / AGENT IN TANK Machine de-scaling The de-scaling agent comes out of the hot water nozzle in intervals. After some intervals the de-scaling agent is discharged directly in the drip tray. EMPTY TRAY. You will hear an acoustic signal. REFILL WATER Thoroughly rinse the water tank and fill it with fresh cold tap water. Then reinstall it. Put a sufficiently large container under the hot water nozzle (15). PRESS MAINTENANCE / REFILL WATER MACHINE DE-SCALING The water comes out of the hot water nozzle in intervals. After some intervals the water is discharged directly in the drip tray. EMPTY TRAY. You will hear an acoustic signal. PRESS MAINTENANCE

15. De-scaling

The coffee machine features an integrated de-scaling programme. The procedure takes some 30 minutes. Only use Jura de-scaling tablets. These are available at your authorized dealer. Your machine will inform you if it needs de-scaling. You can still draw off coffee or hot water / steam and start the de-scaling programme later. Switch off the system before starting the de-scaling programme. Once started, the de-scaling programme must not be interrupted. If acidic de-scaling agents are used, remove any splashes and drops from sensitive surfaces, in particular surfaces made of natural stone and wood, alternatively take appropriate preventive measures. In any case wait until the de-scaling agent is used up and the tank is empty. Never refill de-scaling agent.
MACHINE RINSING: PLEASE SELECT After the de-scaling, clean the aluminium front using a slightly moist cloth.

16. Disposal

Please return the coffee machine to your local dealer, the service shop or to Jura for proper disposal (Fig. 3).
17. Tips for perfect coffee
Adjustable coffee spout You can adjust the height of the coffee spout to the size of your cups Grinding degree Refer to Chapter 3.5 Adjusting the grinding gear. Preheating cups You can preheat the cups using hot water or steam. The smaller the coffee you want to draw off, the more important preheating is. Sugar and cream Stirring coffee/tea will result in heat being released. Adding refrigerated cream or milk will reduce the temperature of the coffee significantly.

18. Messages

Cause REFILL WATER Water tank is empty. Float defective REFILL BEANS Bean tank is empty. Although you have refilled beans, the message still appears. EMPTY COFFEE GROUNDS CONTAINER NO TRAY CLEAN MACHINE MACHINE CALCIFIED REPLACE FILTER FAULT Coffee grounds container full Tray reinstalled too early after emptying Drip tray not installed properly or missing Cleaning required De-scaling required Filter empty General fault Remedy Refill water Rinse or de-scale water tank Refill beans Draw off a cup of coffee. The message will disappear only after you have drawn off a cup of coffee Empty coffee grounds container Wait 10 sec. before reinstalling the tray Install tray properly Start cleaning programme (Chapter 14) Start de-scaling programme (Chapter 15) Change filter (Chapter 6.2) 1) switch off disconnect from mains supply connect machine to mains supply switch on machine
2) Have machine checked by Jura Service

19. Problems

Problem Very loud noise coming from the grinding gear Too little froth when frothing milk Cause Foreign body in grinding gear Remedy Drawing off pre-ground coffee is still possible Have machine checked by Jura Service milk not suitable for frothing frothing aid blocked frothing aid in wrong position Coffee only drips from the coffee spout Grinding degree too fine Pre-ground coffee too fine Use full-cream milk clean frothing aid Draw off steam (Chapter 10) Coarser grinding gear adjustment Use a coarser pre-ground coffee

If the messages or problems are still present, please contact your local authorized dealer or Jura Elektroapparate AG.

20. Legal information

These operating instructions contain all the information required for using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during maintenance. These operating instructions cannot cover any conceivable application. The machine was designed for private household use. Additionally we point out that the content of these operating instructions does not form part of any previous or existing agreement, consent or al legal relationship nor does it constitute a change of such a(n) agreement, consent or legal relationship. Any obligations to be fulfilled by Jura Elektroapparate AG are stipulated in the corresponding purchase contract, which also contains the full and solely applicable warranty stipulations. These contractual warranty stipulations are neither extended nor limited by the specifications contained in these operating instructions. The operating instructions contain information, protected by Copyright. Photocopying or translations into other languages shall not be permissible without Jura Elektroapparate AGs written approval.

21. Technical Data

Voltage: Power: Fuse: Safety check: Energy consumption Standby: Energy consumption Ready for draw-off: Pump pressure: Water tank: Bean tank capacity: Length of mains cable: Weight: Dimensions (WxHxD): approx. 3.5 Wh approx. 11.5 Wh static max. 15 bar 1.9 litres 200gr. approx. 1.1 m 9.7 kg 28 x 34,5 x 43,5cm 230V AC 1450 W 10 A
Coffee grounds container capacity: max. 16 portions