IMPRESSA X90/X95 Instructions for use

Art. Nr. 63721

Jura Impressa X90/X95

English. 6 22

Legend:
= Note DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Important = Tip Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.juraworld.com

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 6

Fig. 7
Fig. 5 A Fig. 8 Fig. B Fig. 10

D A B C

Instructions for use
21. Drip tray / residual water container Drip tray cover Cover for programming keys Coffee key for 2 large cups Coffee key for 1 large cup Coffee key for 2 small cups Coffee key for 1 small cup Key for special coffee ON/OFF switch Rinsing key Display dialogue system Water tank with carrying handle Cover for bean container and aroma protection lid Cover for pre-ground coffee filler funnel Height-adjustable coffee-spout Cup warming tray Selector key for steam Selector key for steam portion Selector switch for coffee or hot water Pivoting nozzle for steam Profi Auto-Cappuccino/Caff Latte Height-adjustable tea-spout Container for coffee grounds

Programming keys

A B C D E F G H Change filter Back-setting of criteria / changing of memory indications downwards Open program Selector switch for pre-ground coffee Key for cleaning program Correction of program / close Forward-setting of criteria / changing of memory indications upwards Key for decalcifying program

Table of contents

1. Description..page 2. Safety instructions..page 2.1 Warnings..page 2.2 Safety precautions..page 3. Check before use...page 3.1 Checking mains voltage.page 3.2 Checking fuse..page 3.3 Adding coffee beans..page 3.4 Adjusting grinder..page 4. Preparing machine..page 4.1 Fill system with water..page 4.2 Cup illumination..page 5. Rinsing the machine..page 6. Adjusting for water hardness..page 7. Use of Claris filter cartridges..page 7.1 Placing filter..page 7.2 Replacing of filter..page 8. Drawing off coffee..page 8.1 Drawing off powder coffee..page 9. Drawing off hot water..page 10. Drawing off steam..page 11. Frothing up milk with the Profi Auto-Cappuccino/Caff Latte..page 11.1 Frothing up a portion of milk..page 11.2 Constant frothing up of milk..page 11.3 Drawing off hot milk using the Profi Auto-Cappuccino/Caff Latte.page 11.4 Drawing off cappuccino using the Profi Auto-Cappuccino/Caff Latte.page 11.5 Controlling the temperature using the Profi Auto-Cappuccino/Caff Latte.page 11.6 Cleaning of the Profi Auto-Cappuccino/Caff Latte.page 12. Switching off machine..page 13. Programming...page
15. 16. 17. 18. 19. 20. 21. 22.
Programming powder quantity.page Programming coffee temperature..page Programming water quantity.page Programming steam portion..page Programming tea portion.page Programming filter..page Programming water hardness..page Programming economy mode.page Programming timer clock..page Programming automatic switch on time..page 13.11 Programming automatic switch off time..page 13.12 Cup counter..page 13.13 Programming language selection.page 13.14 Program key N..page Care and maintenance..page 14.1 Fill water..page 14.2 Empty grounds container.page 14.3 Empty drip tray..page 14.4 Fill beans..page 14.5 Removing foreign objects..page 14.6 Clean machine..page 14.7 Unit calcified..page 14.8 Cleaning metal contacts..page 14.9 General cleaning instructions.page 14.10 Regular servicing..page 14.11 Empty system...page Cleaning...page Decalcifying...page Disposal...page Tips for a perfect coffee.page Messages..page Problems..page Legal information...page Technical specifications..page

13.1 13.2 13.3 13.4 13.5 13.6 13.7 13.8 13.9 13.10
Important information for the user
Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine and keep them in a safe place for easy reference in the future. Should you require further information or should particular problems occur that are not dealt with in these operating instructions in sufficient detail for you, then please ask your local dealer for the information you require or contact Jura Elektroapparate AG directly.
2. Safety instructions 2.1 Warnings
Children are unaware of the dangers that electrical machines represent. Therefore children should never be left unsupervised around electrical machines. This machine should only be used by people who have read and understood the operating instructions. Never use a faulty machine or one with a damaged power cable. Never immerse the machine in water.

2.2 Safety precautions

Never expose the machine to the effects of rain, snow or frost and never operate it with wet hands. Place your machine on a solid level surface. Never leave it on a surface that is warm or hot (hob etc.). Choose a location that is inaccessible for children or pets. Remove plug from power socket if an absence for a longer period of time (holidays etc.) is planned. Always remove plug from power socket before cleaning. When removing plug from power socket, never tug on the cord or on the machine itself. Never repair or open the machine yourself. All repairs should be performed by authorised service centres only using original Jura spare parts and accessories. The machine is connected to the mains power socket via an electric cable. Ensure that no-one trips over this cable and pulls down the machine. Keep children and animals at a distance to the machine. Never put the machine or even parts of it in the dishwasher. To prevent overheating place the machine in an airy place.

1. Description

This fully-automatic espresso/coffee machine impresses because of its user-friendly operational mode and its ingenious technology. In just one brewing-process it can prepare 1 or 2 cups of excellent, professional-quality espresso/coffee with guaranteed froth. Been refined and further developed by Jura, the Intelligent Pre Brew Aroma System (I.P.B.A.S ) ensures full coffee aroma. The Auto-Cappuccino, for example, automatically takes charge of frothing the milk perfectly for your cappuccino. It sucks milk from a Tetra Pak or a jug, heats and froths it up. Just choose the programmable steam quantity or the continuous steam function. Preparing a cup of tea with your machine is as simple as can be as well. The water quantity can be programmed and you can put your teacup under the coffee-spout. Now the selected water quantity flows into your cup through a separate spout. The machine works fully-automatically at the press of a key. A decoded text-display shows messages and simplifies the operation considerably. Because of the integrated rinsing, cleaning and decalcifying programs care and maintenance is quick and easy.

If using acidic decalcifying agents be sure to immediately remove any splashes and drops from delicate surfaces, especially natural stone and wooden surfaces, or take corresponding precautions.
You have the following possibilities: the smaller the dots, the finer the grinding the bigger the dots, the coarser the grinding The grinding grade should only be adjusted while the grinder is working.
3. Check before use 3.1 Checking mains voltage
The machine is set for the correct voltage before leaving our factory. Ensure that your mains voltage corresponds to the details quoted on the rating plate attached to the bottom of the machine.
4. Preparing machine 4.1 Fill system with water
Switch your machine on by pressing ON/OFF key. The machine adjusts fully-automatically to the starting position. PLEASE WAIT FILL SYSTEM / PRESS STEAM Press key. FILL WATER Remove water tank and rinse well with clear tap-water. Fill water tank and replace. Make sure that tank engages well. FILL SYSTEM / PRESS STEAM Place a container under the pivoting nozzle (20) and press key. PLEASE WAIT RINSE UNIT Place a container under the coffee-spout (15) and press rinsing key. UNIT RINSING COFFEE READY

3.2 Checking fuse

The machine is designed for a current of 10 amps. Check that an appropriate fuse is fitted.

3.3 Adding coffee beans

Lift up cover of the bean container (13) and remove aroma protection lid. Clean out any dirt or foreign object from the bean container. Fill the grinder container (Fig. 1) with coffee beans, replace aroma protection lid and close the cover.

3.4 Adjusting grinder

You can adjust the grinder to the roast of your coffee. We recommend the following: for a light roast a finer adjustment for a dark roast a coarser adjustment Open the cover of the bean container (13). To adjust grinding turn selector switch (Fig. 1) to the desired position.

4.2 Cup illumination

The cup illumination puts your coffee in a good light, making it a treat for the eyes.
When you switch on the machine or press any key, the cup illumination is activated for 3 minutes. To switch on the cup illumination, with the machine switched off, press any key.

HARDNESS LEVEL 3: HARDNESS LEVEL 4:
German water hardness French water hardness 28.64 41.14 German water hardness French water hardness 42.96 53.7

5. Rinsing the machine

RINSE UNIT Place an empty cup under the coffee-spout (15). Press rinsing key. If the machine has been switched off and has already cooled down it will be necessary to carry out this rinsing function when the machine is switched on again. After switching off the machine, the rinsing sets off automatically. The machine is adjusted to hardness level 3 before it leaves the factory. You can alter this setting by following the instructions below: Switch the machine on by pressing ON/OFF key. The machine adjusts fully-automatically to the starting position. PLEASE WAIT Open cover (3) and press key P , until you hear an acoustic signal. PRESS KEY / POWDER QUANTITY Press key + several times until the following message appears: HARDNESS LEVEL 3 By pressing key P you can hear an acoustic signal, the set hardness level flashes. You can alter the hardness level by pressing key - or +. After setting, press key P once again to confirm. An acoustic signal can be heard. Press key N to return to stand-by-status.
6. Adjusting for water hardness
The water is heated inside the machine. With use, this leads to calcium deposits (furring) forming on the machine. This will be automatically indicated on the display. For this reason, it is necessary to adjust the machine to the hardness of your local water before you use it for the first time. Use the enclosed test-sticks for this purpose. 1 water hardness on the German scale represents 1.79 on the French scale. The machine has got 5 hardness settings to choose from. While adjusting, the chosen grade is shown on the display. The symbols on the display mean: HARDNESS LEVEL: water hardness function is switched off HARDNESS German water hardness LEVEL 1: French water hardness 1.79 12.53 HARDNESS German water hardness LEVEL 2: French water hardness 14.32 26.85
7. Use of Claris filter cartridges
Under proper implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further information, please read the brochure Claris. Tough to calcium deposits, gentle to your coffee machine.

7.1 Placing filter

Pull up cartridge mounting. Pressing lightly, place the filter cartridge in the water tank (Fig. 2).

Pull down cartridge mounting, until it engages audibly. Fill water tank with cold, fresh tap-water and replace it. Switch the machine on by pressing key ON/OFF. P until you hear an acoustic Open front cover (3) and press key signal. PRESS KEY / POWDER QUANTITY Press key + several times until the following message appears: FILTER NO By pressing key P you can hear an acoustic signal. NO flashes You can alter the setting by pressing key - or +. YES flashes To confirm press key P. An acoustic signal can be heard. RINSE FILTER / PRESS STEAM Place a sufficiently large container (approx. 1 litre) under the pivoting nozzle (20) and press coffee key. PLEASE WAIT / FILTER RINSING. The drawing off of water will stop automatically. FILTER YES Press key N. COFFEE READY The water might be slightly discoloured (this is not damaging to the health).
Empty water tank and pull up cartridge mounting. Pressing lightly, place the filter cartridge in the water tank (Fig. 2). Pull down cartridge mounting, until it engages audibly. Fill water tank with cold, fresh tap-water and replace it. Switch the machine on by pressing key ON/OFF. Open front cover (3) and press key , until you hear an acoustic signal. RINSE FILTER / PRESS STEAM Place a sufficiently large container (approx. 1 litre) under the pivoting nozzle (20) and press coffee key. PLEASE WAIT / FILTER RINSING COFFEE READY The water might be slightly discoloured (this is not damaging to the health).

8. Drawing off coffee

Switch the machine on by pressing key ON/OFF. PLEASE WAIT RINSE UNIT Put an empty cup under the coffee-spout (15) and press rinsing key. UNIT RINSING COFFEE READY Put 1, respectively 2 cups under the coffee-spout and press the required key. The pre-brew system (I.P.B.A.S.) moistens the coffee powder, briefly interrupts the flow and then starts the real brewing process. You can interrupt the flow of coffee at any time by simply pressing any of the coffee keys. To obtain a perfect layer of froth adjust the coffee-spout (Fig. 3) to the size of your cups.

7.2 Replacing of filter

After drawing off 50 litres the filter loses its effect. REPLACE FILTER If only a little water is drawn off the filter should be changed every 2 months. However no message will appear on the display. You will find a special turntable on the cartridge mounting to set the replacement date.
8.1 Drawing off powder coffee
Open cover (3) Press selector key for pre-ground powder coffee. FILL POWDER Now put 1 or 2 level measuring spoons of pre-ground coffee into the pre-ground powder funnel (14). Put 1, respectively 2 cups under the coffee-spout (15) and press the required key. Never use soluble instant coffee or quick coffee. Only use coffee powder from freshly ground beans or pre-ground vacuum-packed coffee. Never fill the funnel with more than 2 portions coffee powder at a time. The powder funnel is not intended as a storage container. If selector key is pressed by mistake this can be corrected by pressing one of the coffee keys. The rinsing program is then activated.

12. Switching off machine
When the machine is switched off, the rinsing program is automatically run again. Therefore place an empty container under the coffee-spout (15) and press ON/OFF key. When the rinsing water has run into the container, the machine powers down. Discard the water.
11.4 Drawing off cappuccino using the Profi Auto-Cappuccino/Caff Latte
The Profi Auto-Cappuccino/Caff Latte can be used to draw off capuccino. Adjust the selector lever (1) (Fig. 10) to position (2) to draw off capuccino.

13. Programming

Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to adapt the result to your personal taste, various settings can be programmed individually. The programming keys are located behind the front cover (3). The following settings can be programmed: Powder quantity Coffee temperature Water quantity Steam portion Tea portion
11.5 Controlling the temperature using the Profi Auto-Cappuccino/Caff Latte
Adjust the selector lever (1) to + for hot milk/cappuccino or for less hot milk/cappuccino. Individual fine adjustment is possible.
Filter Water hardness Economy mode Timer clock Automatic switch on time Automatic switch off time Supplies and cup counter Language selection
TEMPERATURE COFFEE / SELECT KEY By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.
13.3 Programming water quantity
WATER QUANTITY / SELECT KEY Put a cup under the coffee-spout (15) and then press the key that you want to programme. The selected value is confirmed Now your machine prepares a coffee. ENOUGH COFFEE? / PRESS KEY P OK? P - II + When the required water quantity is reached press key P. You can call up the next setting by pressing key +. There is an additional possibility to alter the water quantity anew. Press key + or - for this purpose. If you wish to draw another coffee to control the water quantity, press key again otherwise press key P briefly to store water quantity in memory. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.
13.1 Programming powder quantity
Switch the machine on by pressing ON/OFF key. Press key P until you can hear an acoustic signal. POWDER QUANTITY / SELECT KEY Now press the key that you want to programme. Use the key for 1 cup only. The corresponding quantity for 2 cups is adjusted automatically by the machine after programming is finished. POWDER - II + The powder quantity can be selected by pressing keys + or briefly. To store the new powder quantity in memory briefly press key P. POWDER QUANTITY / SELECT KEY. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.4 Programming steam portion
STEAM PORTION P. Press key PORTION /.20 SEC. By pressing key + or - you can programme time in seconds (drawing off time of sec.) Press key P. STEAM PORTION
13.2 Programming coffee temperature
TEMPERATURE COFFEE / SELECT KEY Now press the key that you want to programme. Select the required temperature (high or normal) by activating key + or -. To store the new coffee temperature in memory briefly press key P.
By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.
13.8 Programming economy mode
ECONOMY MODE OFF Press key P By briefly pressing key + or - you can programme the mode you would like. Then press key P briefly to store mode in memory By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. You can programme your machine to economy mode. In the setting ECONOMY MODE ON the steam heating-system is switched off. The heating for the cup warming tray is switched off too. If you want to draw off steam you need to press the steam key , warning lamps flash and your machine heats up. After 10 minutes the steam heating-system switches off automatically. The warning lamps go out. By pressing the steam key anew, you return to stand-by-status for drawing off steam. ECONOMY MODE OFF means that the stand-by-status for steam is set to 20 minutes and the heating for the cup warming tray is on. After 10 minutes the warning lamp goes out. By pressing the steam key anew, the machine returns to stand-by-status for drawing off steam.
13.5 Programming tea portion
Place a cup under the height-adjustable tea-spout (22). Press key P. OPEN TAP ENOUGH TEA? / CLOSE TAP TEA PORTION The required portion of tea-water is programmed now. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.6 Programming Filter

Please read chapter 7.1 Placing filter.
13.7 Programming water hardness (only with setting Filter no)
HARDNESS LEVEL 3 Press key P By pressing key + or - briefly you can programme the water hardness level. Then press key P briefly to store the water hardness level in memory. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. To determine the water hardness level please read chapter 6. Adjusting for water hardness.
13.9 Programming timer clock
A programming of the timer clock is necessary if an automatic switch on time is required. TIME. Press key P. By briefly pressing key + or - you can set the hours and then confirm by pressing key P.
By briefly pressing key + or - you can set the minutes and then confirm by pressing key P. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

FILL BEANS Fill beans as described in chapter 3.3. The message FILL BEANS will only disappear after drawing off a coffee. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans. Switch off the machine for this purpose.
14.5 Removing foreign objects
Switch off your machine by pressing ON/OFF key. Remove plug from power socket. Open bean container (13) and remove the beans. The remaining beans can be removed with a vacuum cleaner. Loosen both screws in the bean container and then remove container (Fig.5 + 6) Remove any remaining beans with a vacuum cleaner. Put the spanner on (Fig.7). Now turn spanner anticlockwise until the foreign object loosens. Remove remaining powder with a vacuum cleaner. Replace bean container and fasten screws.
14.2 Empty grounds container
Coffee grounds are collected in the grounds container (23). EMPTY GROUNDS If this message shows on the display no more coffee can be drawn off. It is necessary to empty the grounds container. Remove drip tray carefully as there is water in it. Do not disconnect the machine from power socket while you empty grounds.

14.3 Empty drip tray

EMPTY TRAY If this message shows on the display no more coffee can be drawn off. It is necessary to empty the drip tray. Remove drip tray carefully as there is water in it.

14.6 Clean machine

CLEAN UNIT After coffee, etc., has been drawn off 220 times or after 180 rinsing programs have been run, the machine must be cleaned. You can continue to draw off coffee and hot water / steam. However we recommend that you clean the machine (as described in chapter 15) within the next few days.
CLEAN NOW An acoustic signal indicates the need of an immediate cleaning.

14.7 Unit calcified

UNIT CALCED The machine signals when decalcifying becomes necessary. Under the correct implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further indications read Chapter 7 Use of Claris filter cartridges.

If you notice any furring in the water tank, this can be decalcified separately with a customary decalcifying agent. Remove the tank from the machine for this purpose. If a Claris filter cartridge is used, remove it beforehand.

14.10 Regular servicing

Regular Jura services ensure your machines reliability and longer life. Keep the original packaging to protect the machine while being transported.

14.11 Empty system

This procedure is necessary to prevent your machine from frost damage while being transported. Put a container under the pivoting nozzle (20). Press selector key and remove water tank STEAM INTAKE PRESS STEAM / FILL SYSTEM Switch off machine by pressing ON/OFF key
14.8 Cleaning metal contacts
EMPTY TRAY / CLEAN CONTACTS The remnants of the calcified deposits in the area of the metal contacts must be removed. Proceed as follows: Rinse fastenings in groove (B) as well as the metal contacts (A) with hot water and some washing-up liquid. Then clean the fastenings in groove (B) as well with a brush (Fig. 8).
14.9 General cleaning instructions
Never use abrasive articles or corrosive chemicals to clean your machine. Wipe down the casing inside and out using a soft, damp cloth. Clean the pivoting nozzle after every use. After warming milk, draw off some hot water to clean the pivoting nozzle inside. You can take off the Profi Auto-Cappuccino/Caff Latte for a thorough cleaning. The water tank should be rinsed and filled with clean water daily.

15. Cleaning

The machine has an integrated cleaning program. The procedure lasts about 15 minutes. Please use Jura cleaning tablets only. These are available from your Jura dealer. It is essential not to interrupt the process once it has been started. Switch on your machine by pressing ON/OFF key Press key until you can hear an acoustic signal. EMPTY TRAY (FILL WATER might show as well)
Put a sufficiently large container under the coffee-spout (15) in order to prevent cleaning liquid from running into the drip tray. ADD TABLET (Fig. 9) / PRESS CLEANING UNIT CLEANING / PLEASE WAIT EMPTY TRAY PLEASE WAIT RINSE UNIT COFFEE READY The powder funnel for pre-ground coffee should be cleaned after each cleaning process. Remove it from the machine, rinse it with hot tap water and replace it after drying.

16. Decalcifying

Your machine has an integrated decalcifying program. It lasts approx. 50 minutes. Please use Jura decalcifying tablets only. These are available from your Jura dealer. Run the decalcifying program only after the machine has been switched off for at least 5 hours and has cooled down completely. The running decalcifying program must not be interrupted. If using acidic decalcifying agents be sure to immediately remove any splashes and drops from delicate surfaces, especially natural stone and wooden surfaces, or take corresponding precautions. In any case please wait until the filled decalcifying agent is used up and the tank is empty. Never top up the decalcifying agent.

Remove and empty water tank. Replace empty water tank. Switch off your machine by pressing ON/OFF key and let it cool down for approx. 5 hours. Open cover (3). Press key until you can hear an acoustic signal. EMPTY TRAY AGENT IN TANK Pour 0.6 litres of water into a container and completely dissolve the contents of a blister pack (2 tablets). Then fill the mixture into the water tank. AGENT IN TANK / OPEN TAP / PRESS CALC Place a sufficiently large container under the pivoting nozzle (20). Remove the Profi Auto-Cappuccino/Caff Latte. and press Turn selector switch for coffee (19) to the symbol key. UNIT DECALCIFYING / PLEASE WAIT When an acoustic signal is heard place a container under the height-adjustable tea-spout (22). PRESS CALC UNIT DECALCIFYING / PLEASE WAIT CLOSE TAP UNIT DECALCIFYING / PLEASE WAIT Inside the machine the decalcifying agent is conducted to the drip tray. EMPTY TRAY FILL WATER Place a container under the pivoting nozzle (20). OPEN TAP PRESS CALC
UNIT DECALCIFIYING / PLEASE WAIT Place a container under the height-adjustable tea-spout (22). PRESS CALC UNIT DECALCIFIYING / PLEASE WAIT CLOSE TAP UNIT DECALCIFIYING / PLEASE WAIT Inside the machine the water is conducted to the drip tray. CLEAN CONTACTS / EMPTY TRAY (please refer to chapter 14.8) PLEASE WAIT RINSE UNIT UNIT RINSING COFFEE READY

17. Disposal

For correct disposal, you should return your coffee machine to your dealer, Jura service centre or Jura Elektroapparate AG.
18. Tips for a perfect coffee
Height adjustable coffee-spout You can adjust the height of the coffee-spout to the size of your cups. Grinding Please refer to chapter 3.4 Adjusting grinder. Pre-warm cups You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important warming the cups is. Sugar and cream Warmth is lost by stirring the contents of the cup. Adding milk or cream from the refrigerator considerably lowers the temperature of the coffee.

19. Messages

Cause FILL WATER Water tank is empty Water level indicator in tank is jammed Tank is calcified, water level indicator is stuck Bean container is empty Message still displayed, although beans filled A foreign object is stuck in the grinder EMPTY GROUNDS Coffee grounds container is full Message still displayed although grounds container emptied. The message appears after only a few cups have been drawn off TRAY MISSING Tray has not been replaced correctly Grounds have fallen under tray and are preventing it from being correctly inserted The residual water container is full Message still displayed, although container emptied Action Top up with water Empty tank, rinse out, fill up and replace Remove tank, decalcify, rinse well, fill up with water and replace Top up with beans Draw off cup of coffee. FILL BEANS message only disappears after coffee is drawn off Remove foreign object as described in chapter 14.5 Removing foreign objects Remove drip tray, empty grounds container, replace tray The tray was out of the machine for less than 8 sec for emptying. Take tray out again for approx. 10 sec and replace Leave the machine switched on while the grounds container is being emptied. The counter is only reset to zero if the machine is left switched on Insert tray correctly Remove tray, clean inside of machine, replace tray Remove container carefully, empty, rinse out and replace Remove container, clean metal contacts (please refer to chapter 14.8)

FILL BEANS

EMPTY TRAY
Cause CLEAN UNIT You have drawn off coffee 220 times or run the rinsing program 180 times Message still displayed, although machine cleaned The espresso/coffee machine sector needs decalcifying Message still displayed, although machine decalcified Temperature too low
Action Clean as described in chapter 14.6 Run cleaning program again; this time do not add cleaning tablet Run decalcifying program as described in chapter 16 Run cleaning program again; this time using water only and without decalcifying agent Switch device off Leave device for approx. 2 hours at room temperature Switch device on Switch device off, disconnect from mains, switch on

UNIT CALCED

FAULT 2

FAULT 8

Initialisation problem

20. Problems

Problem Cause Action Adjust grinder to a coarser grinding Run the rinsing programme once or twice. If the problem persists, run cleaning programme Coffee flow is stopped after pre-brewing Grinder is extremely noisy Not enough coffee powder in the system Foreign element in grinder Draw off one cup of coffee Proceed as described in chapter 14.5
Coffee only flows in dribs Powder too fine and drabs while drawing off
Problem Not enough froth while frothing up milk
Cause Unsuitable milk-type Frothing nozzle blocked Clean Auto-Cappuccino
Action Use full cream milk Clean frothing nozzle Clean Profi Auto-Cappuccino/Caff Latte as described in chapter 11.6
If the above mentioned problems and/or messages still persist, please contact your dealer or get in touch directly with Jura Elektroapparate AG.

21. Legal information

These operating instructions contain all the information necessary for the correct use, operation and maintenance of your espresso/ coffee machine. Understanding and complying with the directions contained in these operating instructions are essential to ensure that the machine is utilised without risk and to ensure safety during operation and maintenance. These operating instructions cannot cover all the possible ways in which this machine may be used. We would like to further point out that the contents of these operating instructions in no way constitute a part of, or alter, any previous or existing contract, agreement or legal relationship. All obligations on the part of Jura Elektroapparate AG result solely from the relevant sales agreement which also contains full details of the only warranty terms valid in respect of this machine. The contractual terms of this warranty are neither extended nor limited in any form by the information in these operating instructions. These operating instructions contain information that is protected by copyright. The photocopying or translation into any other language of these instructions without prior written authorisation from Jura Elektroapparate AG is strictly prohibited.

22. Technical specifications
Impressa X90/X95 Voltage: Output: Fuse: Safety check: Energy consumption standby: Energy consumption ready to make coffee: Pump pressure: Capacity, bean container: Cable length: Water tank: Capacity, grounds container: Weight: Dimensions (B x H x D): 230 V AC 1350 W 10 A approx. 4,4 Wh approx. 31 Wh, Economy Mode on approx. 41 Wh, Economy Mode off max. 15 bar 280 gr. approx. 1,1 m 5,7 litres max. 40 port. 15 kg 41 x 47 x 39 cm

IMPRESSA X90/X95 Instructions for use

Art. Nr. 63721

Jura Impressa X90/X95

English. 6 22

Legend:
= Note DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Important = Tip Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.juraworld.com

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9

Fig. 10

B Fig. 11 Fig. Fig. 13

D A B C

Instructions for use

21. Drip tray / residual water container Drip tray cover Cover for programming keys Coffee key for 2 large cups Coffee key for 1 large cup Coffee key for 2 small cups Coffee key for 1 small cup Key for special coffee ON/OFF switch Rinsing key Display dialogue system Water tank with carrying handle Cover for bean container and aroma protection lid Cover for pre-ground coffee filler funnel Height-adjustable coffee-spout Cup warming tray Selector key for steam Selector key for steam portion Selector switch for coffee or hot water (TAP) Replaccable steam/frotting nozzle Profi Auto-Cappuccino/Caff Latte Height-adjustable tea-spout Container for coffee grounds

Programming keys

A B C D E F G H Change filter Back-setting of criteria / changing of memory indications downwards Open program Selector switch for pre-ground coffee Key for cleaning program Correction of program / close Forward-setting of criteria / changing of memory indications upwards Key for decalcifying program

Table of contents

1. Description...page 2. Safety instructions...page 2.1 Warnings...page 2.2 Safety precautions..page 3. Check before use..page 3.1 Checking mains voltage..page 3.2 Checking fuse...page 3.3 Adding coffee beans..page 3.4 Adjusting grinder...page 4. Preparing machine...page 4.1 Fill system with water..page 4.2 Cup illumination.. page 5. Rinsing the machine..page 6. Adjusting for water hardness..page 7. Use of Claris filter cartridges..page 7.1 Placing filter..page 7.2 Replacing of filter..page 8. Drawing off coffee..page 8.1 Drawing off powder coffee..page 9. Drawing off hot water..page 10. Drawing off steam.. page 11. Connecting the Profi-Auto-Cappuccino/Caff Latte to the X90/X95..page 11.1 Drawing off cappuccino and hot milk with Profi-Auto-Cappuccino/Caff Latte.page 11.2 Cleaning the Profi-Auto-Cappuccino/Caff Latte.page 12. Switching off machine..page 13. Programming...page 13.1 Programming powder quantity..page 13.2 Programming coffee temperature.page 13.3 Programming water quantity.page
15. 16. 17. 18. 19. 20. 21. 22.
Programming steam portion..page Programming tea portion..page Programming filter.page Programming water hardness..page Programming economy mode.page Programming timer clock..page Programming automatic switch on time...page 13.11 Programming automatic switch off time...page 13.12 Cup counter..page 13.13 Programming language selection.page 13.14 Program key N..page Care and maintenance..page 14.1 Fill water..page 14.2 Empty grounds container..page 14.3 Empty drip tray..page 14.4 Fill beans..page 14.5 Removing foreign objects..page 14.6 Clean machine..page 14.7 Unit calcified..page 14.8 Cleaning metal contacts..page 14.9 General cleaning instructions.page 14.10 Empty system..page Cleaning...page Decalcifying..page Disposal..page Tips for a perfect coffee..page Messages...page Problems...page Legal information..page Technical specifications..page
13.4 13.5 13.6 13.7 13.8 13.9 13.10
Important information for the user
Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine and keep them in a safe place for easy reference in the future. Should you require further information or should particular problems occur that are not dealt with in these operating instructions in sufficient detail for you, then please ask your local dealer for the information you require or contact Jura Elektroapparate AG directly.

2. Safety instructions 2.1 Warnings
Children are unaware of the dangers that electrical machines represent. Therefore children should never be left unsupervised around electrical machines. This machine should only be used by people who have read and understood the operating instructions. Never use a faulty machine or one with a damaged power cable. Never immerse the machine in water.

2.2 Safety precautions

Never expose the machine to the effects of rain, snow or frost and never operate it with wet hands. Place your machine on a solid level surface. Never leave it on a surface that is warm or hot (hob etc.). Choose a location that is inaccessible for children or pets. Remove plug from power socket if an absence for a longer period of time (holidays etc.) is planned. Always remove plug from power socket before cleaning. When removing plug from power socket, never tug on the cord or on the machine itself. Never repair or open the machine yourself. All repairs should be performed by authorised service centres only using original Jura spare parts and accessories. The machine is connected to the mains power socket via an electric cable. Ensure that no-one trips over this cable and pulls down the machine. Keep children and animals at a distance to the machine. Never put the machine or even parts of it in the dishwasher. To prevent overheating place the machine in an airy place.

1. Description

This fully-automatic espresso/coffee machine impresses because of its user-friendly operational mode and its ingenious technology. In just one brewing-process it can prepare 1 or 2 cups of excellent, professional-quality espresso/coffee with guaranteed froth. Been refined and further developed by Jura, the Intelligent Pre Brew Aroma System (I.P.B.A.S ) ensures full coffee aroma. The Auto-Cappuccino, for example, automatically takes charge of frothing the milk perfectly for your cappuccino. It sucks milk from a Tetra Pak or a jug, heats and froths it up. Just choose the programmable steam quantity or the continuous steam function. Preparing a cup of tea with your machine is as simple as can be as well. The water quantity can be programmed and you can put your teacup under the coffee-spout. Now the selected water quantity flows into your cup through a separate spout. The machine works fully-automatically at the press of a key. A decoded text-display shows messages and simplifies the operation considerably. Because of the integrated rinsing, cleaning and decalcifying programs care and maintenance is quick and easy.
If using acidic decalcifying agents be sure to immediately remove any splashes and drops from delicate surfaces, especially natural stone and wooden surfaces, or take corresponding precautions.

3.4 Adjusting grinder

You can adjust the grinder to the roast of your coffee. We recommend the following: for a light roast a finer adjustment for a dark roast a coarser adjustment Open the cover of the bean container (13). To adjust grinding turn selector switch (Fig. 1) to the desired position. You have the following possibilities: the smaller the dots, the finer the grinding the bigger the dots, the coarser the grinding The grinding grade should only be adjusted while the grinder is working.
3. Check before use 3.1 Checking mains voltage
The machine is set for the correct voltage before leaving our factory. Ensure that your mains voltage corresponds to the details quoted on the rating plate attached to the bottom of the machine.

3.2 Checking fuse

The machine is designed for a current of 10 amps. Check that an appropriate fuse is fitted.

3.3 Adding coffee beans

To ensure that your machine will work perfectly for a long time and to avoid damage, please note that the grinding gear of your Jura coffee machine is not suitable for coffee beans which were treated, during or after roasting, with additives (e.g. sugar). Such coffee blends may damage the grinding gear. Any repair costs resulting from the use of such blends are not covered by warranty. Lift up cover of the bean container (13) and remove aroma protection lid. Clean out any dirt or foreign object from the bean container. Fill the grinder container (Fig. 1) with coffee beans, replace aroma protection lid and close the cover.
4. Preparing machine 4.1 Fill system with water
Switch your machine on by pressing ON/OFF key. The machine adjusts fully-automatically to the starting position. PLEASE WAIT FILL SYSTEM / PRESS STEAM Press key. FILL WATER Remove water tank and rinse well with clear tap-water. Fill water tank and replace. Make sure that tank engages well. FILL SYSTEM / PRESS STEAM Place a container under the pivoting nozzle (20) and press key. PLEASE WAIT RINSE UNIT
Place a container under the coffee-spout (15) and press rinsing key. UNIT RINSING COFFEE READY
The machine has got 5 hardness settings to choose from. While adjusting, the chosen grade is shown on the display. The symbols on the display mean: HARDNESS LEVEL: water hardness function is switched off HARDNESS German water hardness LEVEL 1: French water hardness 1.79 12.53 HARDNESS German water hardness LEVEL 2: French water hardness 14.32 26.85 HARDNESS German water hardness LEVEL 3: French water hardness 28.64 41.14 HARDNESS German water hardness LEVEL 4: French water hardness 42.96 53.7 The machine is adjusted to hardness level 3 before it leaves the factory. You can alter this setting by following the instructions below: Switch the machine on by pressing ON/OFF key. The machine adjusts fully-automatically to the starting position. PLEASE WAIT Open cover (3) and press key P , until you hear an acoustic signal. PRESS KEY / POWDER QUANTITY Press key + several times until the following message appears: HARDNESS LEVEL 3 By pressing key P you can hear an acoustic signal, the set hardness level flashes. You can alter the hardness level by pressing key - or +. After setting, press key P once again to confirm. An acoustic signal can be heard. Press key N to return to stand-by-status.

4.2 Cup illumination

The cup illumination puts your coffee in a good light, making it a treat for the eyes. When you switch on the machine or press any key, the cup illumination is activated for 3 minutes. To switch on the cup illumination, with the machine switched off, press any key.

5. Rinsing the machine

RINSE UNIT Place an empty cup under the coffee-spout (15). Press rinsing key. If the machine has been switched off and has already cooled down it will be necessary to carry out this rinsing function when the machine is switched on again. After switching off the machine, the rinsing sets off automatically.
6. Adjusting for water hardness
The water is heated inside the machine. With use, this leads to calcium deposits (furring) forming on the machine. This will be automatically indicated on the display. For this reason, it is necessary to adjust the machine to the hardness of your local water before you use it for the first time. Use the enclosed test-sticks for this purpose. 1 water hardness on the German scale represents 1.79 on the French scale.
7. Use of Claris filter cartridges
Under proper implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further information, please read the brochure Claris. Tough to calcium deposits, gentle to your coffee machine.
The water might be slightly discoloured (this is not damaging to the health).

7.2 Replacing of filter

After drawing off 50 litres the filter loses its effect. REPLACE FILTER If only a little water is drawn off the filter should be changed every 2 months. However no message will appear on the display. You will find a special turntable on the cartridge mounting to set the replacement date. Empty water tank and pull up cartridge mounting. Pressing lightly, place the filter cartridge in the water tank (Fig. 2). Pull down cartridge mounting, until it engages audibly. Fill water tank with cold, fresh tap-water and replace it. Switch the machine on by pressing key ON/OFF. Open front cover (3) and press key , until you hear an acoustic signal. RINSE FILTER / PRESS STEAM Place a sufficiently large container (approx. 1 litre) under the pivoting nozzle (20) and press coffee key. PLEASE WAIT / FILTER RINSING COFFEE READY The water might be slightly discoloured (this is not damaging to the health).

7.1 Placing filter

Pull up cartridge mounting. Pressing lightly, place the filter cartridge in the water tank (Fig. 2). Pull down cartridge mounting, until it engages audibly. Fill water tank with cold, fresh tap-water and replace it. Switch the machine on by pressing key ON/OFF. Open front cover (3) and press key P until you hear an acoustic signal. PRESS KEY / POWDER QUANTITY Press key + several times until the following message appears: FILTER NO By pressing key P you can hear an acoustic signal. NO flashes You can alter the setting by pressing key - or +. YES flashes To confirm press key P. An acoustic signal can be heard. RINSE FILTER / PRESS STEAM Place a sufficiently large container (approx. 1 litre) under the pivoting nozzle (20) and press coffee key. PLEASE WAIT / FILTER RINSING. The drawing off of water will stop automatically. FILTER YES Press key N. COFFEE READY

8. Drawing off coffee

Switch the machine on by pressing key ON/OFF. PLEASE WAIT RINSE UNIT Put an empty cup under the coffee-spout (15) and press rinsing key.
UNIT RINSING COFFEE READY Put 1, respectively 2 cups under the coffee-spout and press the required key. The pre-brew system (I.P.B.A.S.) moistens the coffee powder, briefly interrupts the flow and then starts the real brewing process. You can interrupt the flow of coffee at any time by simply pressing any of the coffee keys. To obtain a perfect layer of froth adjust the coffee-spout (Fig. 3) to the size of your cups.

9. Drawing off hot water

Put a cup under the height-adjustable coffee spout (22) and turn selector switch for hot water (19) to the symbol. The machine will now deliver hot water. TEA PORTION The drawing off of hot water will stop automatically. CLOSE TAP Turn selector switch for hot water back to the symbol. To stop this process turn selector switch for hot water (19) back to the symbol.
8.1 Drawing off powder coffee
Open cover (3) Press selector key for pre-ground powder coffee. FILL POWDER Now put 1 or 2 level measuring spoons of pre-ground coffee into the pre-ground powder funnel (14). Put 1, respectively 2 cups under the coffee-spout (15) and press the required key. Never use soluble instant coffee or quick coffee. Only use coffee powder from freshly ground beans or pre-ground vacuum-packed coffee. Never fill the funnel with more than 2 portions coffee powder at a time. The powder funnel is not intended as a storage container. If selector key is pressed by mistake this can be corrected by pressing one of the coffee keys. The rinsing program is then activated.

10. Drawing off steam

Steam can be used for heating liquids and frothing milk for cappuccino. Make sure that the steam/frothing nozzle is pushed upwards when liquids are heated. Push down the frothing aid (Fig. 4) to froth liquids. During frothing some water will escape the system before the actual steam draw-off. This does not affect the result, e.g. when frothing milk. At the start of the water draw-off there can be splashing The steam nozzle becomes hot. Avoid direct contact with the skin! Use the key to switch on the coffee machine. PLEASE WAIT RINSE UNIT Press rinsing key UNIT RINSING: COFFEE READY
Place a cup under the steam/frothing nozzle (20) and immerse the frothing aid in the milk to be frothed or the liquid to be heated. Press steam portion draw-off key. STEAM PORTION You can stop the draw-off operation at any time by pressing the steam draw-off key. COFFEE READY
For cappuccino turn the selector switch (1) (Fig. 13) to area (2) For hot milk turn the selector switch (1) (Fig. 13) to area (3) To increase the heat turn the selector switch (1) (Fig. 13) to area (+) To reduce the heat turn the selector switch to area (). Now place the cup with the cappuccino froth or the hot milk under the coffee spout and draw of the product of your choice.
11. Connecting the Profi-Auto-Cappuccino/ Caff Latte to the X90/X95
Disassemble the replaceable hot water nozzle or the replaceable steam/frothing nozzle. Mount the Profi-Auto-Cappuccino/Caff Latte (Fig. 10). Press one side of the hose into the opening behind the dial (Fig. 11). The optionally available milk container can be used for sucking in milk. How to connect it (Fig. 11).
11.2 Cleaning the Profi-Auto-Cappuccino/ Caff Latte
The Profi-Auto-Cappuccino/Caff Latte (21) must be cleaned after each draw-off operation. Daily cleaning is recommended. Fill water in a container and immerse the hose in it. Draw off steam until the water/steam mixture is clean. If necessary, disassemble the Profi-Auto-Cappuccino/Caff Latte and thoroughly rinse the flow regulation with water (Fig. 11 and Fig. 12). For proper cleaning, use the Jura Auto Cappuccino Cleaning Agent which is available at your authorized dealer.
11.1 Drawing off cappuccino and hot milk with Profi-Auto-Cappuccino/Caff Latte
Fill the milk container with milk or immerse the hose in the milk directly. Place a cup under the Profi Auto Cappuccino/Caff Latte (21). Press the steam portion draw off key STEAM PORTION The frothing/heating time depends on the steam portion settings you have programmed. (See Programming steam portion Chapter 13.4)
12. Switching off machine
When the machine is switched off, the rinsing program is automatically run again. Therefore place an empty container under the coffee-spout (15) and press ON/OFF key. When the rinsing water has run into the container, the machine powers down. Discard the water.

13. Programming

Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to adapt the result to your personal taste, various settings can be programmed individually. The programming keys are located behind the front cover (3). The following settings can be programmed: Powder quantity Coffee temperature Water quantity Steam portion Tea portion Filter Water hardness Economy mode Timer clock Automatic switch on time Automatic switch off time Supplies and cup counter Language selection
To store the new powder quantity in memory briefly press key P. POWDER QUANTITY / SELECT KEY. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.
13.2 Programming coffee temperature
TEMPERATURE COFFEE / SELECT KEY Now press the key that you want to programme. Select the required temperature (high or normal) by activating key + or -. To store the new coffee temperature in memory briefly press key P. TEMPERATURE COFFEE / SELECT KEY By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.
13.3 Programming water quantity
WATER QUANTITY / SELECT KEY Put a cup under the coffee-spout (15) and then press the key that you want to programme. The selected value is confirmed Now your machine prepares a coffee. ENOUGH COFFEE? / PRESS KEY P OK? P - II + When the required water quantity is reached press key P. You can call up the next setting by pressing key +. There is an additional possibility to alter the water quantity anew. Press key + or - for this purpose. If you wish to draw another coffee to control the water quantity, press key again otherwise press key P briefly to store water quantity in memory.
13.1 Programming powder quantity
Switch the machine on by pressing ON/OFF key. P until you can hear an acoustic signal. Press key POWDER QUANTITY / SELECT KEY Now press the key that you want to programme. Use the key for 1 cup only. The corresponding quantity for 2 cups is adjusted automatically by the machine after programming is finished. POWDER - II + The powder quantity can be selected by pressing keys + or briefly.
By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.
13.7 Programming water hardness (only with setting Filter no)
HARDNESS LEVEL 3 Press key P By pressing key + or - briefly you can programme the water hardness level. Then press key P briefly to store the water hardness level in memory. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. To determine the water hardness level please read chapter 6. Adjusting for water hardness.

13.12 Cup counter

200 SUPPLIED (TOTAL SUPPLIED) To obtain the information press the required key. The display will show you the number of times the function has been chosen. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. It is not possible to call up hot water and steam supplies.
13.10 Programming automatic switch on time
A programming of the timer clock is necessary if an automatic switch on is needed. UNIT ON. P. Press key By briefly pressing key + or - you can set the hours and then confirm by pressing key P. By briefly pressing key + or - you can set the minutes and then confirm by pressing key P. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.
13.13 Programming language selection
Press key P By briefly pressing key + or - call up the language desired and then confirm by pressing key P. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming.

13.14 Program key

14.3 Empty drip tray
EMPTY TRAY If this message shows on the display no more coffee can be drawn off. It is necessary to empty the drip tray. Remove drip tray carefully as there is water in it.
By using key N you can set back the following settings (powder quantity, coffee temperature, water quantity, steam portion, tea portion) to their original standard settings. COFFEE READY Press key N until you can hear an acoustic signal. If a mistake occurs while programming one of the above settings, just press key N and the chosen setting moves back to its original standard setting.

14.4 Fill beans

FILL BEANS Fill beans as described in chapter 3.3. The message FILL BEANS will only disappear after drawing off a coffee. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans. Switch off the machine for this purpose.
14. Care and maintenance 14.1 Fill water
FILL WATER If this message shows on the display no more coffee can be drawn off. Top up water. The water tank should be rinsed and filled with fresh water daily. Only use fresh, cold water. Never top up with milk, mineral water or any other liquids. You can top up water without removing tank.
14.5 Removing foreign objects
Switch off your machine by pressing ON/OFF key. Remove plug from power socket. Open bean container (13) and remove the beans. The remaining beans can be removed with a vacuum cleaner. Loosen both screws in the bean container and then remove container (Fig.5 + 6) Remove any remaining beans with a vacuum cleaner. Put the spanner on (Fig.7). Now turn spanner anticlockwise until the foreign object loosens. Remove remaining powder with a vacuum cleaner. Replace bean container and fasten screws.

14.2 Empty grounds container
Coffee grounds are collected in the grounds container (23). EMPTY GROUNDS If this message shows on the display no more coffee can be drawn off. It is necessary to empty the grounds container. Remove drip tray carefully as there is water in it. Do not disconnect the machine from power socket while you empty grounds.

14.6 Clean machine

CLEAN UNIT After coffee, etc., has been drawn off 220 times or after 180 rinsing programs have been run, the machine must be cleaned. You can continue to draw off coffee and hot water / steam. However we recommend that you clean the machine (as described in chapter 15) within the next few days. CLEAN NOW An acoustic signal indicates the need of an immediate cleaning.
After warming milk, draw off some hot water to clean the pivoting nozzle inside. You can take off the Profi Auto-Cappuccino/Caff Latte for a thorough cleaning. The water tank should be rinsed and filled with clean water daily. If you notice any furring in the water tank, this can be decalcified separately with a customary decalcifying agent. Remove the tank from the machine for this purpose. If a Claris filter cartridge is used, remove it beforehand.

14.7 Unit calcified

UNIT CALCED The machine signals when decalcifying becomes necessary. Under the correct implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further indications read Chapter 7 Use of Claris filter cartridges.

14.10 Empty system

This procedure is necessary to prevent your machine from frost damage while being transported. Put a container under the pivoting nozzle (20). Press selector key and remove water tank STEAM INTAKE PRESS STEAM / FILL SYSTEM Switch off machine by pressing ON/OFF key
14.8 Cleaning metal contacts
EMPTY TRAY / CLEAN CONTACTS The remnants of the calcified deposits in the area of the metal contacts must be removed. Proceed as follows: Rinse fastenings in groove (B) as well as the metal contacts (A) with hot water and some washing-up liquid. Then clean the fastenings in groove (B) as well with a brush (Fig. 8).

15. Cleaning

The machine has an integrated cleaning program. The procedure lasts about 15 minutes. Please use Jura cleaning tablets only. These are available from your Jura dealer. It is essential not to interrupt the process once it has been started.
14.9 General cleaning instructions
Never use abrasive articles or corrosive chemicals to clean your machine. Wipe down the casing inside and out using a soft, damp cloth. Clean the pivoting nozzle after every use.
Switch on your machine by pressing ON/OFF key Press key until you can hear an acoustic signal. EMPTY TRAY (FILL WATER might show as well) Put a sufficiently large container under the coffee-spout (15) in order to prevent cleaning liquid from running into the drip tray. ADD TABLET (Fig. 9) / PRESS CLEANING UNIT CLEANING / PLEASE WAIT EMPTY TRAY PLEASE WAIT RINSE UNIT COFFEE READY The powder funnel for pre-ground coffee should be cleaned after each cleaning process. Remove it from the machine, rinse it with hot tap water and replace it after drying.
In any case please wait until the filled decalcifying agent is used up and the tank is empty. Never top up the decalcifying agent. Remove and empty water tank. Replace empty water tank. Switch off your machine by pressing ON/OFF key and let it cool down for approx. 5 hours. Open cover (3). Press key until you can hear an acoustic signal. EMPTY TRAY AGENT IN TANK Pour 0.6 litres of water into a container and completely dissolve the contents of a blister pack (2 tablets). Then fill the mixture into the water tank. AGENT IN TANK / OPEN TAP / PRESS CALC Place a sufficiently large container under the pivoting nozzle (20). Remove the Profi Auto-Cappuccino/Caff Latte. Turn selector switch for coffee (19) to the symbol and press key. UNIT DECALCIFYING / PLEASE WAIT When an acoustic signal is heard place a container under the height-adjustable tea-spout (22). PRESS CALC UNIT DECALCIFYING / PLEASE WAIT CLOSE TAP UNIT DECALCIFYING / PLEASE WAIT Inside the machine the decalcifying agent is conducted to the drip tray. EMPTY TRAY

16. Decalcifying

Your machine has an integrated decalcifying program. It lasts approx. 50 minutes. Please use Jura decalcifying tablets only. These are available from your Jura dealer. Run the decalcifying program only after the machine has been switched off for at least 5 hours and has cooled down completely. The running decalcifying program must not be interrupted. If using acidic decalcifying agents be sure to immediately remove any splashes and drops from delicate surfaces, especially natural stone and wooden surfaces, or take corresponding precautions.

FILL WATER Place a container under the pivoting nozzle (20). OPEN TAP PRESS CALC UNIT DECALCIFIYING / PLEASE WAIT Place a container under the height-adjustable tea-spout (22). PRESS CALC UNIT DECALCIFIYING / PLEASE WAIT CLOSE TAP UNIT DECALCIFIYING / PLEASE WAIT Inside the machine the water is conducted to the drip tray. CLEAN CONTACTS / EMPTY TRAY (please refer to chapter 14.8) PLEASE WAIT RINSE UNIT UNIT RINSING COFFEE READY

17. Disposal

For correct disposal, you should return your coffee machine to your dealer, Jura service centre or Jura Elektroapparate AG.
18. Tips for a perfect coffee
Height adjustable coffee-spout You can adjust the height of the coffee-spout to the size of your cups. Grinding Please refer to chapter 3.4 Adjusting grinder. Pre-warm cups You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important warming the cups is. Sugar and cream Warmth is lost by stirring the contents of the cup. Adding milk or cream from the refrigerator considerably lowers the temperature of the coffee.

19. Messages

Cause FILL WATER Water tank is empty Water level indicator in tank is jammed Tank is calcified, water level indicator is stuck Bean container is empty Message still displayed, although beans filled A foreign object is stuck in the grinder EMPTY GROUNDS Coffee grounds container is full Message still displayed although grounds container emptied. The message appears after only a few cups have been drawn off TRAY MISSING Tray has not been replaced correctly Grounds have fallen under tray and are preventing it from being correctly inserted The residual water container is full Message still displayed, although container emptied Action Top up with water Empty tank, rinse out, fill up and replace Remove tank, decalcify, rinse well, fill up with water and replace Top up with beans Draw off cup of coffee. FILL BEANS message only disappears after coffee is drawn off Remove foreign object as described in chapter 14.5 Removing foreign objects Remove drip tray, empty grounds container, replace tray The tray was out of the machine for less than 8 sec for emptying. Take tray out again for approx. 10 sec and replace Leave the machine switched on while the grounds container is being emptied. The counter is only reset to zero if the machine is left switched on Insert tray correctly Remove tray, clean inside of machine, replace tray Remove container carefully, empty, rinse out and replace Remove container, clean metal contacts (please refer to chapter 14.8)

FILL BEANS

EMPTY TRAY
Cause CLEAN UNIT You have drawn off coffee 220 times or run the rinsing program 180 times Message still displayed, although machine cleaned The espresso/coffee machine sector needs decalcifying Message still displayed, although machine decalcified Temperature too low

Action Clean as described in chapter 14.6 Run cleaning program again; this time do not add cleaning tablet Run decalcifying program as described in chapter 16 Run cleaning program again; this time using water only and without decalcifying agent Switch device off Leave device for approx. 2 hours at room temperature Switch device on Switch device off, disconnect from mains, switch on

UNIT CALCED

FAULT 2

FAULT 8

Initialisation problem

20. Problems

Problem Cause Action Adjust grinder to a coarser grinding Run the rinsing programme once or twice. If the problem persists, run cleaning programme Coffee flow is stopped after pre-brewing Grinder is extremely noisy Not enough coffee powder in the system Foreign element in grinder Draw off one cup of coffee Proceed as described in chapter 14.5
Coffee only flows in dribs Powder too fine and drabs while drawing off
Problem Not enough froth while frothing up milk
Cause Frothing nozzle blocked Clean Auto-Cappuccino
Action Clean frothing nozzle Clean Profi Auto-Cappuccino/Caff Latte as described in chapter 11.2
If the above mentioned problems and/or messages still persist, please contact your dealer or get in touch directly with Jura Elektroapparate AG.

21. Legal information

These operating instructions contain all the information necessary for the correct use, operation and maintenance of your espresso/ coffee machine. Understanding and complying with the directions contained in these operating instructions are essential to ensure that the machine is utilised without risk and to ensure safety during operation and maintenance. These operating instructions cannot cover all the possible ways in which this machine may be used. We would like to further point out that the contents of these operating instructions in no way constitute a part of, or alter, any previous or existing contract, agreement or legal relationship. All obligations on the part of Jura Elektroapparate AG result solely from the relevant sales agreement which also contains full details of the only warranty terms valid in respect of this machine. The contractual terms of this warranty are neither extended nor limited in any form by the information in these operating instructions. These operating instructions contain information that is protected by copyright. The photocopying or translation into any other language of these instructions without prior written authorisation from Jura Elektroapparate AG is strictly prohibited.

22. Technical specifications
Impressa X90/X95 Voltage: Output: Fuse: Safety check: Energy consumption standby: Energy consumption ready to make coffee: Pump pressure: Capacity, bean container: Cable length: Water tank: Capacity, grounds container: Weight: Dimensions (B x H x D): 230 V AC 1350 W 10 A approx. 4,4 Wh approx. 31 Wh, Economy Mode on approx. 41 Wh, Economy Mode off max. 15 bar 280 gr. approx. 1,1 m 5,7 litres max. 40 port. 15 kg 41 x 47 x 39 cm
The machine complies with the following EU directives: 73/23/EWG dated 19/02/1973 Low Voltage Directive including Modification Directive 93/336/EWG 89/336/EWG dated 03/05/1989 EMC Directive including Modification Directive 92/31/EWG