Technical data
IMPRESSA Xs95 / Xs90 One Touch
Keyfeatures Latte Macchiato and Cappuccino at the touch of a button Energy Save Mode (E.S.M. ) Active bean monitoring Sounddesign Adjustable coffee strength Rotary Switch Graphic display Two separate heating systems Counter for cups dispensed Indication of care status TV Certificate for user-friendly contents of the operation manual
IMPRESSA key technologies and standards Intelligent Pre Brew Aroma System (I.P.B.A.S.) CLARIS plus filter cartridge (I.P.W.S. compatible) Two cups in a single brewing operation Powerful 6-level conical grinder Thermoblock heating system High-performance pump, 15 bar Coffee powder tank for second pre-ground coffee
Wir passen unsere Produktpalette stndig dem neusten Stand der Technik an. Deshalb sind nderungen der gezeigten Daten vorbehalten.

JURA Elektroapparate AG

Multilingual display dialogue system (7 languages) Automatic recognition of filter change Automatic recognition of maintenance programmes Cup illumination Power Switch
Programming Programmable brewing temperature Programmable water quantity for coffee Programmable hot water Programmable switch-off time Automatic switch off Programmable switch-on time Integrated rinsing/cleaning/descaling programme Adjustable water hardness
Preparation Times 1 Espresso (50 ml) 2 Espressi 1 coffee (100 ml) 2 coffees approx. 30 sec approx. 45 sec approx. 40 sec approx. 65 sec
1 Cappuccino (60 ml coffee) 1 Latte Macchiato (35 ml coffee) approx. 55 sec approx. 75 sec.
Capacity Daily capacity Volume of bean hopper Optionally expandable to Volume of grounds container (portions) Water tank capacity approx. 50 cups g 260 each g 750 each approx. 40 5.7 l
Accessories (all optional)) Milk Cooler Cup warmer Permanent connection to water supply Catering Mobil MDB Interface Different billing systems
Facts Variable brewing unit Height-adjustable dual-purpose dispenser Weight Dimensions (W x H x D) Cable length Intensity of current Voltage Power Tests Article number IMPRESSA Xs95 One Touch 13431 IMPRESSA Xs90 One Touch 13362 Swiss Made 5 - 16 g mm 13.8 kg 41 x 47 x 39 cm 1.1 m 10 A 230 V AC 1350 W

IMPRESSA XS95/XS90 One Touch Quick Reference Guide
The IMPRESSA Manual together with these short instructions IMPRESSA XS95/XS90 One Touch Quick Reference Guide has been awarded the seal of approval by the independent German Technical Inspection Agency, TV SD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
These short instructions do not replace the IMPRESSA XS95/XS90 One Touch Manual. Make sure you read and observe the safety information and warnings first in order to avoid hazards.

Switching on

When the IMPRESSA is switched on, a prompt for the rinse operation automatically appears which is initiated by pressing the maintenance button. Precondition: Your IMPRESSA is switched on at the power switch and the on/off button Q is illuminated (standby). Q T Press the on/off button to switch the IMPRESSA on. WELCOME TO JURA appears briefly on the display.
HEATING UP PRESS RINSE, the maintenance button c lights up.
T Place a receptacle under the coffee spout. c T Press the maintenance button. The machine rinses itself, stopping automatically. COFFEE READY appears on the display. Your IMPRESSA is ready to use.
Using and activating filter
Your IMPRESSA no longer has to be descaled if you are using CLARIS plus filter cartridges.
E Perform the Insert filter operation without interruptions. This
will ensure that your IMPRESSA always produces its best. Precondition: COFFEE READY is displayed. T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until MAINTENANCE appears on the display. g T Turn the Rotary Switch until FILTER NO is displayed. k T Press the Rotary Switch to enter the programme item.

FILTER NO

g T Turn the Rotary Switch until FILTER YES is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED w appears briefly on the display to confirm the setting.
INSERT FILTER / PRESS RINSE, the maintenance button c lights up. T Remove a CLARIS plus filter cartridge and the filter cartridge extension from the Welcome Pack. T Fit the extension on top of the filter cartridge. T Remove the water tank and empty it. T Lift the cartridge holder and insert the filter cartridge into the water tank, applying slight pressure. T Close the cartridge holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert.
T Place a receptacle (at least 500 ml) under the frother.
E If you are using the Professional Cappuccino Frother, set the
selection lever of the frother to the steam position n. c T Press the maintenance button. FILTER RINSING, water flows out of the frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. E The water may be slightly discoloured. This is not harmful to health and does not affect the taste. Filter rinsing stops automatically after approx. 500 ml. COFFEE READY appears on the display. The filter is now activated.

Changing the filter

E After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you to replace the filter. E After two months, the filter will cease to work. Monitor the elapsed time by adjusting the date plate on the cartridge holder. E If the CLARIS plus filter cartridge is not activated, you will not be prompted to change the filter. To change the CLARIS plus filter cartridge when prompted to do so by your IMPRESSA, proceed as follows: Precondition: COFFEE READY / CHANGE FILTER is displayed, and the maintenance button c lights up. c T Press the maintenance button. DURATION 2 MIN. / START YES
E If you want to change the filter at a later point in time, turn the Rotary Switch until START NO is displayed. Exit the maintenance programme by pressing the Rotary Switch. The prompt Change filter remains on the display. c T Press the maintenance button. CHANGE FILTER / PRESS RINSE T Remove the water tank and empty it. T Lift the cartridge holder. T Take out the old CLARIS plus filter cartridge and the extension. T Fit the extension on top of a new filter cartridge. T Insert the filter cartridge into the water tank, exerting slight pressure. T Close the cartridge holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert.

E You can interrupt filter rinsing at any time. To do this, press

any button.

E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste. Filter rinsing stops automatically after approx. 500 ml. The IMPRESSA heats up and is once again ready to use.

Cleaning the machine

After 220 coffee preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water. T Use only original JURA care products.

CAUTION

E The cleaning programme only lasts about 20 minutes. E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E JURA cleaning tablets are available from stockists.
Precondition: COFFEE READY / CLEAN MACHINE is displayed, and the maintenance button c lights up. c T Press the maintenance button. DURATION 20 MIN. / START YES
E If you want clean the machine at a later point in time, turn the Rotary Switch until START NO is displayed. Exit the maintenance programme by pressing the Rotary Switch. The prompt Clean machine remains on the display.
c T Press the maintenance button.

EMPTY TRAY

T Empty the drip tray and coffee grounds container and put them back into the machine. PRESS RINSE, the maintenance button c lights up. T Place a receptacle under the coffee spout and the frother. c T Press the maintenance button. CLEANS, the cleaning operation starts. The process is interrupted. ADD TABLET / PRESS RINSE, the maintenance button c lights up. T Open the cover of the filler funnel for pre-ground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. c T Press the maintenance button. CLEANS, water flows out of the coffee spout and the frother several times.
E You can follow the current status of cleaning on the progress
bar. The process is interrupted, EMPTY TRAY. T Empty the drip tray and coffee grounds container and put them back into the machine. The cleaning operation is now complete. The IMPRESSA is ready for use again.

Descaling the machine

The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the degree of hardness of your water. If the descaling agent comes into contact with the skin or eyes, this can cause irritation. T Avoid contact with the skin or eyes. T Rinse the descaling agent off with clean water. Should you get any descaling agent in your eye, see a doctor. If the wrong descaling agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water. T Use only original JURA ca re products. If the descaling operation is interrupted, there may be damage to the machine. T Allow the descaling program to run to the end. If the descaling agent comes into contact with sensitive surfaces, damage cannot be ruled out. T Clean up any splashes immediately.

E The descaling programme lasts approx. 45 minutes. E JURA descaling tablets are available from stockists. E If you use a CLARIS plus filter cartridge and this is activated,
you will not be prompted to change the filter.
E Remove the CLARIS plus filter cartridge, if installed, before descaling the machine. Precondition: COFFEE READY / DECALCIFY MACHINE is displayed and the maintenance button c lights up. c T Press the maintenance button. DURATION 45 MIN. / START YES
E If you want to descale the machine at a later point in time, turn the Rotary Switch until START NO is displayed. Exit the
maintenance programme by pressing the Rotary Switch. The prompt Decalcify machine remains on the display.
T Empty the drip tray and coffee grounds container and put them back into the machine.

SOLVENT IN TANK

T Remove the water tank and empty it. T Completely dissolve the contents of one blister (3 JURA descaling tablets) in a container that holds 600 ml of water. This may take several minutes. T Pour the solution into the empty water tank and insert it in the machine. SOLVENT IN TANK / PRESS RINSE, the maintenance button c lights up. T Remove the frother from the Connector System. T Place a receptacle under the hot water spout and another under the Connector System. c T Press the maintenance button. DECALCS, water flows out of the Connector System and the hot water spout. The maintenance button c flashes during the descaling operation.
E You can follow the current status of descaling on the progress
bar. The process is interrupted, EMPTY TRAY. T Empty the receptacles below the hot water spout and the Connector System. T Empty the drip tray and coffee grounds container and put them back into the machine. RINSE WATER TANK / FILL WATER TANK T Remove the water tank and rinse it thoroughly. T Fill the water tank with fresh, cold water and reinsert. PRESS RINSE, the maintenance button c lights up. T Refit the frother.
T Place a receptacle under the coffee and hot water spout and another under the frother. c T Press the maintenance button. DECALCS, water flows out of the frother and the hot water spout. The process is interrupted, HEATING UP. MACHINE RINSING, water flows out of the coffee spout. The operation stops automatically, EMPTY TRAY. T Empty the drip tray and coffee grounds container and put them back into the machine. The descaling operation is now complete. Your IMPRESSA heats up and is once again ready to use.

E If the descaling operation stops unexpectedly, rinse the water

tank thoroughly.

Rinsing the cappuccino frother
E This chapter applies to the Professional and Easy Cappuccino
Frothers. Each time milk has been prepared the IMPRESSA displays a prompt for Cappuccino rinsing. Precondition: COFFEE READY / RINSE CAPPUCCINO is displayed and the maintenance button c lights up. T Place a receptacle under the frother.
E If you are using the Professional Cappuccino Frother, turn
the selection lever to the steam position n. c T Press the maintenance button. CAPPU. RINSING, the frother is rinsed. The procedure stops automatically. COFFEE READY appears on the display.
Cleaning the cappuccino frother
Frothers. To ensure that the respective frother works perfectly, you should clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water. T Use only original JURA care products.
E The JURA Auto-Cappuccino Cleaner is available from
stockists. Precondition: COFFEE READY is displayed. T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until MAINTENANCE appears. k T Press the Rotary Switch to enter the programme item.

CLEAN CAPPUCCINO

k T Press the Rotary Switch.
CLEANER FOR CAPPU., the maintenance button c lights up. T Pour 250 ml of fresh water into a container and add one capful (max. 15 ml) of Auto-Cappuccino Cleaner. T Immerse the milk pipe in the receptacle with the cleaning solution. E If you are using the Professional Cappuccino Frother, turn
the selection lever to the milk foam p or milk t position. T Place another receptacle under the frother. c T Press the maintenance button. CAPPUCCINO CLEANING, the frother and pipe are cleaned. WATER FOR CAPPUCCINO, the maintenance button c lights up. T Rinse the receptacle thoroughly, fill it with approx. 250 ml of fresh water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the frother once more. c T Press the maintenance button. CAPPUCCINO CLEANING, the frother and pipe are rinsed with fresh water. COFFEE READY appears on the display. Your IMPRESSA is once more ready to use.
Disassembling and rinsing the Professional Cappuccino Frother
T Carefully remove the frother from the Connector System by twisting slightly. T Dismantle the frother completely. T Rinse all the frother parts thoroughly under running water. T Reassemble the frother.

E Ensure that the individual parts are correctly and firmly
attached to one another to ensure optimum function of the frother. T Firmly attach the frother to the Connector System.
Disassembling and rinsing the Easy Cappuccino Frother

Art. 67801/XS95/en/0712