DR-MV150B Quick Guide FAQ
Thank you for your purchase of the JVC DR-MV150B DVD Video Recorder. If you have any questions regarding the hookup or operation of your DR-MV150B, please contact our Customer Care Center at 1-800-252-5722 Please Note: Be sure to connect the AC power plug into the power outlet after all other connections are completed
During the Initial Set Up, I am being asked to set the Clock. Does this model have Auto Clock Set? Why is my remote not working after I change batteries? After replacing the batteries, the remote code is reset to C. Refer to page 8 of the instruction book and set it. Can I control my TV or Satellite box using this remote? The remote control supplied with DR-M150 is not a multi-brand-remote. Why the newly recorded DVD plays in the DRMV150B but does not play in other DVD players? You must "Finalize" the DVD before it can play in another DVD player. Please see page 22 in the Instruction book. What DVDs can I use to record on my DRMV150B? DVD-R, DVD+R, DVD-RW and DVD+RW, DVD-RAM can be used to record on your DR-MV150B. For recommended recordable DVD discs, please refer to page 3 in your owners manual. Why do I get a message Copy Prohibited when trying to record The signal you are attempting to record is copy prohibited. This recorder can record copy permitted video on normal recordable disc and copy once video on CPRM disc. Contact the retailer or JVC parts department for CPRM disc. Why my DR-MV150B is showing a distorted picture? The DR-MV150B has a progressive scan feature. This feature only works with a TV that accepts progressive scan signal. If the picture is distorted, press OUTPUTSTATUS button on the front panel repeatedly to select 480i. Refer to page 6 of the Instruction book. Why is the VCR playback picture distorted when the output status is set to 1080p? When viewing VCR playback, the picture can be distorted when output status is selected to 1080p. If the picture is distorted, press OUTPUT STATUS on the front panel repeatedly until the picture appears normal. Refer to page 6 of the Instruction book. Why is my DR-MV150B not showing 1080p picture via component output? When HDMI is connected and 720p/1080i/1080p is selected there will be no signal output via the COMPONENT OUT. Press OUTPUTSTATUS button and select 480i or 480p in order to watch the video signal from COMPONENTOUT. LVT2018-001B 0309SKMLGEEGL
This unit doesnt have an Auto Clock Setting. You will need to manually set the clock as shown on page15 of the owners manual under the Initial Setup Wizard. You can also look on page 17 of the owners manual and follow the directions for Clock-Set.
When I turn on my DR-MV150B, it flashes "Hello" and buttons on the remote control or the front panel are not responding for 10 - 15 seconds. Is this normal? When the DR-MV150B is first turned on, it will flash" Hello" for a few seconds. Please wait until "Hello" stops flashing before using. After a disc is inserted into the tray, it takes 25-30 seconds until the set can be operated. Why cant I see Menu, DVD playback, VHS playback, or the Recording channel on my TV? The recorder must be connected to the television using AV cables or HDMI cable, and the televisions input mus be selected correctly to see the video. Refer to the TVs instruction book. My TV has RF connector only. How can I view the Recorder Menu, DVD playback, VCR playback or Channel scan? For viewing the Recorder video on TV that has only RF connector, you have to use an RF converter. Refer to the Quick Start Guide. How can I watch one program while recording another program Connect the recorders Antenna IN to the wall connector. Connect the recorder to the TV using RF cable and AV cable. Perform channel scan on both TV and the recorder. Select the viewing channel on the TV and the recording channel on the recorder. Use the TVs input select to flip between the two. I am using cable box. Why am I unable to watch one program while recording another one Your cable box or Satellite box outputs the selected channel through all outputs (RF, AV, or HDMI). In order to watch one channel while recording another, you need to connect cable signal (not from the cable box) or antenna signal direct to the TV using RF connection How do I set timer recording? Refer to page 35 of the instruction book

DR-MV150B DVD VIDEO RECORDER Basic Operation
Need Help? Please call the JVC Customer Service TOLL FREE CUSTOMER CARE HOTLINE: 1(800)252-5722

QUICK START GUIDE

INSTRUCTIONS pg. 10

http://www.jvc.com

Connections
Connect the Antenna, Cable TV, Cable Box
Basic-1 : Antenna or Wall Jack (Cable TV)

Antenna or cable

Basic-2 : Cable or Satellite Box
Cable or Satellite Box without AVOUT

Cable or Satellite Box

AV OUTPUT

Video (R) - Audio - (L)

ANTENNA IN (VHF/UHF IN)

AV OUTPUT (Video/Audio)

DR-MV150B
ANTENNA OUT (VHF/UHF OUT)

Included Accessories

"AAA" battery x 2 (For remote control)
In case there are no AV output, use this connection

INPUT1 (Video/Audio)

Remote control RF cable

Video cable

Audio cable
LVT2017-001B 0209SKMLGEEGL
Basic-3 : Connecting To TV

Connect with your TV

INSTRUCTIONS pg. 11

AC Outlet

You must make this connection.
ANTENNA OUT OUTPUT (Video/Audio) AV INPUT
Necessary if you want to record and watch different programs at the same time.

ANTENNA IN

To TV (AV INPUT)
The TV must be set to EXT-Video, Aux, Video 1, or etc to watch DVD, VCR or Tuner.
Basic-4 : If your TV has Antenna In Jack only.

ANTENNA OUT

OUTPUT (Video/Audio) AV INPUT (Video/Audio)

AV INPUT

RF Modulator (Not Supplied)

Rear of TV

After connections, Power On.
The TV must be set to the same channel as the output of the RF Modulator.

Initial Setup Wizard

STANDBY/ON

INSTRUCTIONS pg. 15

Select Language

Move next step

Select "Tuning Band"

Press "ENTER"

Set the "Date, Year and Time"
Moves the cursor to the previous or next column. Changes the setting at the current cursor position.
Press "STANDBY/ON"
Press "ENTER" Finish
The Remote code must be set correctly. Refer to page 8 of the Instruction.

BASIC PLAYBACK

INSTRUCTIONS pg. 25

Select "DVD"

Select "VCR"

Start Playback

Stop Playback

BASIC RECORDING

Select "DVD or VCR" or

(One-Touch Recording)

INSTRUCTIONS pg. 34
Playable Discs: DVD-Video, DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-RAM, CD-R, CD-RW, Video CD, Audio CD, DVD+R DL

Select Input

(AV1, AV2, DV IN or Ch)

Start Recording

Stop Recording

Channel

Select Mode
DVD: XP, SP, LP or EP VCR: SP or SLP
Note: To playback the recorded disc with other DVD players, it is necessary to finalize the disc. (INSTRUCTIONS pg. 22)
Recordable Discs: DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-RAM
TIMER RECORDING (Munual Timer Programming)
Select "HOME" Select "Timer Record"

INSTRUCTIONS pg. 35

Select "NEW" and Press "ENTER"
Enter the necessary information for you timer recording(s).
Changes the setting at the current cursor position.

Press "ENTER" to check on the Timer Record List
Press "RETURN" Finish

Dubbing from VCR to DVD

INSTRUCTIONS pg. 37
You can copy the contents of a VHS tape to a DVD using the DUBBING button. This allows you to archive your old VHS tapes to DVD.
Preparation : Set the resolution to 480i using the OUTPUT STATUS button before dubbing. Press VCR button to set the VCR mode.
Insert Blank Disc and Cassette
Select the desired Record Mode.
Find the place on the VHS tape from which you want to start dubbing.

Select XP, SP, LP or EP

Select [Dubbing].

Start Dubbing.

Access the Dubbing menu screen.

Stop Dubbing.