Reviews & Opinions
Independent and trusted. Read before buy JVC DR-MV5!

JVC DR-MV5

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (Polish)
JVC DR-MV5, size: 10.6 MB
Related manuals
JVC DR-MV5sus-dr-mv5 Instruction Manual
JVC DR-MV5SEK
JVC DR-MV5SE
JVC DR-MV5BE
JVC DR-MV5sus-dr-mv5 Quick Start

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

JVC DR-MV5JVC DR-MV5S - DVDr/ VCR combo

DVDr, Remote control

For those with a collection of VHS recordings they would like to continue to use or archive onto DVD, JVC offers the DR-MV5S, which combines all of the features of DR-M100S DVD recorder with a VHS VCR featuring JVC's VHS Progressive Scan and a one-touch intelligent dubbing system. The dubbing system includes three new features: auto record speed optimizer - calculates total recording time on VHS tape then automatically selects the most suitable recording speed for dubbing to DVD; auto thumbn... Read more

 

[ Report abuse or wrong photo | Share your JVC DR-MV5 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
cen 3:15pm on Friday, July 23rd, 2010 
one touch dubbing interface for recording shows is near impossible. one touch dubbing interface for recording shows is near impossible.
donaldg75 6:10am on Thursday, May 27th, 2010 
After using the DR-MV5S for a little over 6 months I give this unit very high marks. my dad bought this dvd recorder a while ago for 400 bucks.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

DR-MV5SU_Quick Guide_B5.fm Page 1 Friday, August 26, 2005 10:12 AM

DR-MV5S

JVC Customer Care Center 1-800-252-5722

Quick Guide FAQs

Thank you for your purchase of this JVC DVD/Video Cassette Player/Recorder. If you have any questions regarding the hookup or operation of this unit, please contact our Customer Care Center at 1-800-252-5722. Representatives are available to assist you from 9AM to 10PM Eastern Time 7 days a week.

Please Note:

Be sure to connect the AC power plug into the power outlet only after all other connections are completed. When this unit is initially plugged into a power outlet or after a power outage, LOADING will blink on the front panel for approximately 50 seconds and all buttons on the front panel and remote control will not respond. This is not a malfunction.
Upon connecting this unit, I am unable to see a picture on Ch 3 or 4.
What DVDs can I use to record on this unit? ] DVD-R, DVD-RW, and DVD-RAM can be used to record on this unit. DVDs with a (+) symbol will not be recognized as recordable media on this unit. My newly recorded DVD plays on this unit but does not play on other DVD players. ] You must Finalize the DVD before it can play on another DVD player. Please see page 79 in the instruction manual. My DVD picture is showing a split screen or vertical lines.
The RF out on this unit is only used to pass the antenna signal to your TV. ] You will need to connect this unit to your Television with A/V Cables and/or an S-Video cable. Be sure to select the appropriate INPUT or VIDEO MODE on your Television to access the signal. The clock on this unit is not set automatically. I am not using a cable box. Is this a malfunction?
The clock on this unit may not be set automatically in some geographical areas. ] If the clock does not set automatically, you may set the clock manually by following the instructions on page 21 in the instruction manual. When I turn on this unit it flashes Hello and all the buttons on the remote control and the front panel will not respond for 10 - 15 seconds. Is this normal?
When this unit is first turned on, it will flash Hello as the internal EPROM chip is updated with information. ] Please wait until Hello stops flashing before you attempt to use the remote control or front panel buttons.
This unit has a progressive scan feature. This feature only works with a TV that accepts a progressive scan signal. ] To disable the progressive scan feature on this unit, press and hold the progressive scan button on the remote control for a few seconds until the picture clears up. (See page 74 in the instruction manual.)
For additional troubleshooting tips, please refer to pages 80 - 83 in the instruction manual.
LPT1032-006A 0805MNH-SW-BJ

doc1

2 Place the disc.

Since disc size changes depending on the disc to be played back, be sure to correctly align the disc with the grooves for its size. If the disc is not in its groove, it may be scratched or otherwise damaged. To insert an 8 cm disc, place it according to the inner groove.
Place the disc on the disc tray with the label side facing up.
Maintenance of discs If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the centre outwards. If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any anti-static agents. CAUTION: Sometimes during playback, noise may appear or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.) These symptoms are caused by the discs, not by the malfunction of the unit.

Page 11

Filename [MV5S_05Name.fm]
MV5S_05Name.fm Page 12 Tuesday, September 13, 2005 4:00 PM

12 EN INDEX Front View

A B C DE FGHIJKL
A B C D E F G H I J K L M N O P
Eject Button (x (EJECT)) pg. 27 Cassette Loading Slot VHS Lamp (VHS) pg. 27 DVD Lamp (DVD) pg. 26 Open/Close Button (x (OPEN/CLOSE)) pg. 11 Reverse Search Button (3) (DVD deck) pg. 45, 52 Rewind Button (3) (VHS deck) pg. 57 Forward Search Button (5) (DVD deck) pg. 45, 52 Fast Forward Button (5) (VHS deck) pg. 57 Stop Button (8) pg. 26, 27 Disc Tray Play Button (4) pg. 26, 27 Pause Button (9) pg. 26, 57 Record Button (7) pg. 28, 30 Standby/On Button (STANDBY/ON 1) S-video Input Connector (S-VIDEO) (DVD deck only) pg. 42 Video/Audio Input Connectors (VIDEO/AUDIO ((MONO) L/R)) pg. 42 Front Display Panel pg. 13
Q Infrared Beam Receiving Window R VHS/DVD Select Button* (VHS/DVD) pg. 26, 27
* This button will not function during navigation mode or set up mode.
S Dubbing Button (DUBBING) pg. Dubbing Direction Buttons (VHS]/}DVD) pg. T Channel Buttons (CH +/) pg. 28, 30, 41 U DV Input connector (DV IN (i*)) (DVD deck only) pg. 41
* i (i.Link) refers to the IEEE1394-1995 industry specification and extensions thereof. The i logo is used for products compliant with the i.Link standard.
To access covered connectors, push and open the connector cover.

STANDBY/ON PUSH-OPEN

Rear View

A B C D E F

OUTPUT DVD DVD
COMPONENT VIDEO OUT DIGITAL AUDIO OUT S VIDEO

INPUT L-1

S VIDEO
DVD OUTPUT VHF/UHF DVD / VCR IN

PCM/ STREAM

L L AUDIO R

DVD / VCR

COAXIAL

L AUDIO R

AUDIO R
A Region Number Label pg. 9 B AC Power Cord pg. 16 C Cooling Fan
This prevents the temperature from rising inside the unit. Do not remove it. Install the unit so as not to block the area around the fan. The cooling fan on the rear of the unit may be activated even if the unit is turned off in the following cases; In the Automatic Satellite Program Recording standby mode ( pg. 36) when AUTO CLOCK is set to ON ( pg. 21) (Set AUTO CLOCK to OFF if you mind the noise of the fan.)
D Component Video Output Connectors (COMPONENT VIDEO OUT (Y/PB/PR)) pg. 16
This component video output enables you to watch the images on the VHS deck in Progressive scan mode, refer to VHS Progressive Scan ( pg. 58).
E S-video/Video/Audio Output Connectors (S VIDEO/ VIDEO/AUDIO OUTPUT) (DVD deck only) pg. 16 F S-video Input Connector (S VIDEO INPUT (L-1)) (DVD deck only) pg. 43 G Video/Audio Output Connectors (VIDEO/AUDIO OUTPUT) pg. 43 H Antenna Input Connector (VHF/UHF IN) pg. 16 I Digital Audio Output Connectors (DIGITAL AUDIO OUT (COAXIAL)) (DVD deck only) pg. 44, 71 J Video/Audio Input Connectors (VIDEO/AUDIO INPUT (L-1)) pg. 43 K Antenna Output Connector (VHF/UHF OUT) pg. 16

Page 12

MV5S_05Name.fm Page 13 Tuesday, September 13, 2005 4:00 PM

Front Display Panel

A B CD E F G H I J K L
LPCM FR XP SP LP EP VR +-RW VCD DVD -RAM

A Disc Type Indicator

H Track/Chapter Indicator (TRK/CHAP)
TRK or CHAP lights depending on a disc loaded while the 3rd and 4th digits from the left of the Multi Display (Q) indicate the numbers explained below. TRK: Total number of tracks or track number being played back are displayed on the Multi Display. CHAP: Chapter number being played back are displayed on the Multi Display.
When a disc is loaded, the type of the disc is indicated.

Disc Status Indicator

When a disc is running, the disc marks rotate. During High-Speed Search: Rotate faster than normal playback. During Slow Motion: Rotate slower than normal playback. While recording/dubbing: Inner red ring lights. During Timer Recording, inner red ring slowly blinks. While playing back: Outside ring lights. While paused: Disc marks blink when either recording or playing back. While stopped: Disc marks all light. While resume stopped: Disc marks all blink. While the disc tray opened: Disc marks all light out. No disc on the disc tray: Disc marks all light out.

Page 27Tuesday, 13 September 2005 18:11
MV5S_07Basic PlayRec.fm Page 28 Tuesday, September 13, 2005 6:20 PM

BASIC RECORDING

Basic Recording (DVD)
1 Load a recordable disc.
For details, refer to Placing A Disc ( pg. 11). Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/DVD switch to DVD.
VHS/DVD on the unit repeatedly or 2 Presson the remote control so that the DVD DVD lamp lights up on the unit. number 3 Press CH +/ or theyou wish buttons to select the channel to record.
If you record the programs received by cable box or DBS receiver. 1) Select L-1 by pressing CH +/. 2) Set the cable box or DBS receiver to the appropriate channel.
It is not possible to record programs on a DVD-R disc which has already been finalized.
MODE repeatedly to select 4 Press RECmode, then press ENTER. the recording
Each time you press REC MODE, the recording mode changes as follows: XP ] SP ] LP ] EP ] FR60FR360* ] FR420, FR480 ] (Back to the beginning)
* The value is selectable from 1 to 6 hours in 5-minutes interval by pressing w e repeatedly after selecting FR60FR360. To change the value in 30-minutes interval, press and hold w e.
For details on the recording mode, see Recording Mode ( pg. 29).
7 on the unit to recording. Or 5 Press holding 7, pressstarton the remote while 4 control.
6 Press 9 to pause recording.
To resume recording, press 4.
7 Press 8 to stop recording.
It takes about 10 seconds to end the writing session when you stop recording.
Page 28Tuesday, 13 September 2005 18:11
MV5S_07Basic PlayRec.fm Page 29 Tuesday, September 13, 2005 6:20 PM
It is recommended to format a DVD-RAM disc before use if you use the disc on this unit for the first time. When using a brand-new DVD-RW disc, format the disc either in VR mode or in Video mode. ( pg. 78) Recordings made on DVD-R/RW disc must be finalized to play back on other DVD players. Perform Finalize A Disc (DVD Deck Only) ( pg. 79). You can record up to 99 programs and 999 play lists on each disc. Some programs can only be recorded one time. When recording is started, an index of the first part of recording is automatically recorded. ( pg. 62) To record satellite programs, refer to page 36. To delete the index, refer to page 64. Recording sometimes may stop or cannot be performed even if there is enough available capacity remaining on the disc.

Recording Mode

MPEG2 format is used as recording format. As a guide for picture quality, the bps unit is used to represent how much data can be recorded per second. The larger this value is, the better the picture quality becomes but more capacity is required for the recording. Select XP or SP for programs where quick movement occurs, such as sports programs, and LP or EP for talk shows, etc. with relatively less movement. The recording modes for a 4.7 GB disc are set as follows: Recording mode Recording amount (approx.) Maximum recording time (approx.)

XP SP LP EP FR60 FR360* ( pg. 60) FR420* FR480*
9.4 Mbps 5 Mbps 2.5 Mbps 1.6 Mbps The amount varies depending on the selected time.
1 hour 2 hours 4 hours 6 hours hours

7 hours 8 hours

* For details on FR mode, refer to Free Rate Function ( pg. 60)
Recording Resume Function
If there is a power outage during recording, Instant Timer Recording (ITR) ( pg. 59) or timer recording ( pg. 31, 32), the recording will resume automatically when power is restored to the unit unless the units memory backup has expired.
Page 29Tuesday, 13 September 2005 18:11
MV5S_07Basic PlayRec.fm Page 30 Tuesday, September 13, 2005 6:20 PM

Basic Recording (VHS)

1 Load a cassette with the record safety tab intact.
The units power comes on automatically and the counter is reset to 0:00:00.
unit repeatedly 2 Press VHS/DVD on thecontrol so that or VHS on the remote
the VHS lamp lights up on the unit. number 3 Press CH +/ or theyou wish buttons to select the channel to record.
MODE 4 Press RECmode. repeatedly to set the recording recording. 5 Press 7 on the unit to start4 on the Or while holding 7, press remote control.
6 Press 9 to pause recording. 7 Press 8 to stop recording.
You can select channel during the Record Pause mode. To resume recording, press 4.
Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.
If there is a power outage during recording, Instant Timer Recording (ITR) ( pg. 61) or timer recording ( pg. 31, 32), the recording will resume automatically when power is restored to the unit unless the units memory backup has expired.

Recording mode

Record safety tab
Maximum recording time (approx.)

2 hours 6 hours

Select when the picture quality is important. Select when the time is important. You can record 3 times longer than SP mode.
Page 30Tuesday, 13 September 2005 18:11
Filename [MV5S_08Basic TimerDub.fm]
MV5S_08Basic TimerDub.fm Page 31 Tuesday, September 13, 2005 6:22 PM

VHS PRGM CHECK

DVD PRGM CHECK

Program Check screen.

STOP DATE START CH DAILY/WEEKLY REC MODE 05/07 SAT 7:00PM - 8:00PM 44 WEEKLY SP 10/07 THU 10:00PM - 10:30PM 10 XP 11/07 FRI 08:00AM - 09:00AM 26 LP 11/07 FRI 08:30AM - 09:30AM 33 LP ++++++++++++++++DVD NEW TIMER PROGRAM ++++++++++++++++

EXIT PROG

4 For DVD deck
DISC TIMER PRGM OK SELECT WITH [CURSORS] THEN PRESS [ENTER] SELECT
Press rt w e to select DVD PRGM CHECK and press rt to select DVD NEW TIMER PROGRAM, then press ENTER. For VHS deck Press rt w e to select VHS PRGM CHECK and press rt to select VHS NEW TIMER PROGRAM, then press ENTER.

TIMER PROGRAM

DATE 10/07/03 THU DAILY/WEEKLY

START --:-REC MODE SP

STOP --:--
5 Press rt to set the desired date.
The current date appears on the TV screen. The date you enter appears in its place.
CONFIRM SET TIMER PROGRAMING WITH [CURSORS] THEN PRESS [ENTER] SELECT

PROG ENTER

TIMER rtwe
6 Press w e to select START, then press rt to set the desired start time.
Each press of rt advances/goes back the start time in 1-min. increments. To advance/go back the start time in 30-min. increments, press and hold rt.
7 Press w e to select STOP, then press rt to set the desired
Each press of rt advances/goes back the stop time in 1-min. increments. To advance/go back the stop time in 30-min. increments, press and hold rt.

stop time.

8 Press w e to select CH, then press rt to select the desired

channel.

9 Press w e to select the desired recording option as required.
Refer to step 6 in VCR Plus+ Timer Programing ( pg. 31).
10 Press ENTER to access the Program Confirmation screen. 11 Press ENTER to complete timer programing.
To program another timer, repeat steps 3 11. If PROGRAM OVERLAPPED appears on the TV screen, see page 35.
Cable Box and DBS Receiver Users (DVD Deck Only) To timer-record a satellite broadcast using Manual Timer Programing: A Perform Manual Timer Programing. B Set the cable box or DBS receiver to the appropriate channel before the selected program begins. C Select L-1 in step 8. D Leave the cable box or DBS receivers power on. NOTES:

Note that this selection is not available when the source program is recorded in 16BIT (48 kHz) mode.

To [DV IN]

6 Press REC MODE repeatedly to set the recording mode. 7 Locate the point from where you want to start dubbing, then
Camcorder DV cable (VC-VDV 204U) (not provided)
To play back in slow speed (1/10 of the normal speed), press 9 to pause playback, then press 3 or 5. To play back frame-by-frame, press 9 to pause playback, then press 9 repeatedly. Each press of 9 advances a frame. To change the playback direction, press 3 or 5.
stop or pause playback by pressing the following buttons on the remote control: 4, 5, 3, 8, 9

8 Press w e to select

DV connector

, then press ENTER. The

DV equipment
Playback on the external DV equipment and recording on the unit should start simultaneously. When the playback from the beginning is not possible, the DV DUBBING controller cannot be used. Perform dubbing without using the DV DUBBING controller. ( below) To pause dubbing, press w e to select , then press ENTER. Both the unit and the external DV equipment pause dubbing. Pressing 9 on the unit also works the same way. To clear the DV DUBBING controller from the TV screen, press ON SCREEN.

dubbing starts.

9 Press 8 on the remote control to stop dubbing.
Both the unit and the external DV equipment stop dubbing. Dubbing copyright guarded programs is not possible. Original DV informations such as the recording date and time are not recorded. The superimposed indication during the operation or dubbing is not recorded. It is not possible to perform dubbing when ] lights up on the unit. Press VHS] so that ] lights off.
Performing dubbing without using the DV DUBBING controller A Press CH +/ to set the channel to DV. B Press REC MODE repeatedly to set the recording mode. C Start playback on the external DV equipment slightly before the actual point from where you wish to start dubbing. D Press 7 on the unit to start recording. Or press and hold 7 and press 4 on the remote control. The dubbing starts. E When the dubbing ends, press 8 on the unit, then stop playback on the external DV equipment.

Example:

When X appears on the TV screen in step 1, the disc does not have a top menu or disc menu.
For Audio CD You can perform 4 levels of speed search with 5 and 3. (Audio is active also during high-speed search.) You cannot perform slow motion for each direction.
Page 45Monday, 12 September 2005 11:14
MV5S_00.book Page 46 Monday, September 12, 2005 11:16 AM

Resume Function

It is possible to memorize the position where you stop playback and resume playback from that position. Be sure to set RESUME to ON or DISC RESUME. ( pg. 74) 1 Press 8 during playback to memorize a resume point.
TOP MENU ENTER MENU SLOW (3) REMAIN DISPLAY SUBTITLE
The unit enters Resume Stop mode and memorizes the position where you have stopped playback as a resume point. (The inside of the disc status indicator on the front display panel blinks while memorizing.) The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected if RESUME is set to DISC RESUME. ( pg. 74) To clear the resume points: (The inside of the disc status indicator stops blinking and lights.) When RESUME is set to ON:
Press 1 to turn off the unit. Press x (OPEN/CLOSE) to take out the disc. Press 8 in stop mode. Press TOP MENU to display the top menu, then start playback by selecting an item, etc. Press MENU to display the disc menu, then start playback by selecting an item, etc. Set RESUME to OFF. ( pg. 74) Press 8 in stop mode. Press TOP MENU to display the top menu, then start playback by selecting an item, etc. Press MENU to display the disc menu, then start playback by selecting an item, etc.

SLOW + (5)

When RESUME is set to DISC RESUME:
Still Picture/Frame-By-Frame Playback
2 Press 4 in stop mode to resume playback. The unit starts
playback from the resume point. NOTES:
DISC RESUME setting works on DVD VIDEO, VCD and already finalized DVD-R/DVD-RW (video mode) discs. For other types of discs, the function under ON setting will be applied even if RESUME is set to DISC RESUME. ( pg. 74) If you stop the playback of a disc for which a resume point has already been memorized, the memory will be updated with the new resume point. After the unit has memorized the resume points for 30 discs, remembering a new resume point will cause the unit to delete the oldest memorized point. Stopping playback of a disc for which a resume point is already stored may change the order in which the points are stored. This may potentially change the order in which points are deleted. When the unit memorizes a resume point for a disc, it also remembers audio language, subtitle and angle settings. This function may not work for some Video CDs. When RESUME is changed to ON or OFF ( pg. 74), resume points of the discs memorized with RESUME set to DISC RESUME will be cleared. Resume points are memorized for each side of a double-sided disc.

Page 50Monday, 12 September 2005 11:14
MV5S_00.book Page 51 Monday, September 12, 2005 11:16 AM
Display During Live Memory Playback
During recording, you can watch at your will what was previously recorded or is currently being recorded. It is possible to perform freely normal playback operations (forward/reverse high-speed search and variable-speed search) within the range of the red or blue bar on the TV screen. When Live Memory Playback reaches the point of 30 seconds before the current recording point by forward high-speed search or other operations, the unit returns to normal playback. The superimpose display appears by pressing ON SCREEN. ( pg. 15) The Live Check picture is displayed on the bottom right corner by pressing LIVE CHECK.
Playback counter Live Memory Playback mark Playback title number Disc used

DVD-RAM KOALA

TITLE 9
Recording mode Recording title number Recording counter display (remaining/elapsed time) Present time

0:14:55 XP

CHAPTER 67 TITLE 9 EACH 12:34:25

22 : PR 12 BBC1

Recording channel Playback mark Recording mark Live Check picture
Title name Bar meter (see below)

Recording mark

This unit displays the current recording/playback status by the bar meter. (Example of bar meter display)
Capacity of a disc Recorded While stopped Total length of the program being played Current playback position During playback Capacity of a disc Remaining capacity when recording started Current recording position While recording Capacity of a disc Recording start position Live Memory Playback Capacity of a disc Recording start position Current playback position Live Memory Playback of another program Total length of the program being played back Blue (recorded part) Orange (recording part) Green (playing part) Black (unrecorded or unplayed part) Current recording position Current playback position Current recording position Not recorded
Page 51Monday, 12 September 2005 11:14
MV5S_00.book Page 52 Monday, September 12, 2005 11:16 AM
52 EN Buttons To Be Used During Live Memory Playback
Pressing once skips forward for approximately 30 seconds and resumes playback. Pressing repeatedly skips forward continuously as many times as pressed. It is useful when skipping over unwanted sections.
Pressing once skips back for approximately 30 seconds and resumes playback. Pressing repeatedly skips back for approximately 7 seconds continuously as many times as pressed. It is useful when watching sports programs, etc.

currently selected is highlighted and pointed by H.

AUTO 1

2 Press w e to select
, then press ENTER. The pop-up window appears under the selected item.

ON SCREEN

3 Press rt to select the desired option, then press ENTER.
How To Access The On-screen Bar
1 Press ON SCREEN twice whenever a disc is loaded.
Contents of the on-screen bar during playback DVD VIDEO

NORMAL CINEMA SHARP SOFT

To clear the on-screen bar Press ON SCREEN. NOTE:
See the corresponding pages for details on each menu item.

CINEMA

Video CD

VIDEO-CD

Page 53Monday, 12 September 2005 11:14
MV5S_00.book Page 54 Monday, September 12, 2005 11:16 AM

A-B Repeat Playback

You can repeat the desired part. During playback
1 Press ON SCREEN twice to access the on-screen bar. 2 Press w e to select . 3 Press ENTER at the beginning of the desired part you want to
repeat (point A). The elapsed playing time of the point A appears.

DVD-VIDEO A 0:16:58 B

CINEMA AUTO 1

rtwe RETURN

4 Press ENTER at the end of the desired part you want to repeat
The selected part of the disc (between point A and B) is played repeatedly.
DVD-VIDEO A 0:16:58 B 0:17:45
(point B). The elapsed playing time of the point B appears.
To clear the on-screen bar Press ON SCREEN. To cancel A-B Repeat Playback , then press ENTER. Press w e to select
A-B Repeat Playback may not work properly depending on the type of disc being used. The subtitles recorded around the A-B point may not appear. When the end of the item is reached before the end point is set, the on-screen bar disappears from the TV screen. In such a case, repeat the procedure from step 1. The point B must be set at least 3 seconds after the point A. When playing back a DVD, A-B Repeat Playback is possible only within the same title. cannot be selected during Program and Random Playback. cannot be selected while stopped.

Repeat Playback

You can repeat playback as you like according to the type of disc.
1 Press ON SCREEN twice to access the on-screen bar. 2 Press w e to select , then press ENTER. The pop-up
window appears under the selected item.
3 Press rt repeatedly to select the desired Repeat mode, then press ENTER.
DVD-RAM/RW/R OFF: Repeat playback is not performed. ALL REPEAT: The whole disc is played back repeatedly. TITLE REPEAT: The current title is played back repeatedly. DVD VIDEO OFF: Repeat playback is not performed. TITLE REPEAT: The current title is played back repeatedly. CHAPTER REPEAT: The current chapter is played back repeatedly. Audio CD/Video CD/JPEG/MP3

Page 55Monday, 12 September 2005 11:14
MV5S_00.book Page 56 Monday, September 12, 2005 11:16 AM

Random Playback

You can play back all the tracks on the disc in random order. While stopped

09 CANCEL

1 Press ON SCREEN twice to access the on-screen bar. 2 Press w e to select RND, then press ENTER. Playback starts

in random order.

RANDOM
To cancel Random Playback Perform steps 1 and 2. NOTE:
The same track will not be played back more than once during Random Playback.
Select The Switching Interval Of The Slide Show

ON SCREEN CLEAR (8)

You can control the switching interval of the slide show.

Program Playback

You can program up to 30 tracks (Video CD or Audio CD) to play back in the desired order. While stopped
1 Press ON SCREEN twice to access the on-screen bar. 2 Press w e to select PRGM, then press ENTER. The program
table appears under on-screen bar.

PROGRAM

Each time you press rt, the interval changes as follows: 5 SEC. { 10 SEC. { 15 SEC. { 20 SEC. { 25 SEC. { 30 SEC. { (Back to the beginning)
3 Press the number buttons to
USE [0-9] KEYS TO SELECT TRACK
enter the track numbers in the desired order. Examples: A To select track 5, press the Program Total Time number button 5 and ENTER. B To select track 15, press the number button 1 and 5. C To select track 25, press the number button 2 and 5. If you have specified a wrong selection Press CANCEL. The last selection is erased. Or press CLEAR (8). The whole selection is erased.
When all of the programed tracks have been played back, Program Playback stops, but the programed information remains. To add tracks to the end of the program, perform steps 1 through 3. During Program Playback, pressing 6 skips to the next selection of the program. Pressing 2 returns to the beginning of the current selection.
JPEG files are played back as a slide show. It may take more time to display an image with larger file size.
4 Press 4. Playback starts in the programed order.
To clear the on-screen bar and the contents of the program Press ON SCREEN. To cancel Program Playback Press w e to select PRGM, then press ENTER. NOTE:
Program Playback is not possible depending on the type of disc.
Page 56Monday, 12 September 2005 11:14
MV5S_00.book Page 57 Monday, September 12, 2005 11:16 AM

Advanced Playback (VHS)

Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/DVD switch to DVD. Press VHS so that the VHS lamp lights up on the unit.
Each press of the button increases the search speed for each direction. When pressing 5: (SP): +5x{+7x (EP): +11x{+21x When pressing 3: Once 3 is pressed, reverse search starts in 1x normal playback speed. After this process, each press of 3 changes the search speed between 5x and 7x in SP mode, 11x and 21x in EP mode. (SP): 1x]5x{7x (EP): 1x]11x{21x To resume normal playback, press 4.

REMAIN DISPLAY

Page 59Monday, 12 September 2005 11:14
MV5S_00.book Page 60 Monday, September 12, 2005 11:16 AM

60 EN Free Rate Function

To record the entire program, the unit automatically sets the appropriate recording mode depending on the combination of the total time of the program to be recorded and either the remaining disc space or the specified recording time (from 60 minutes to 480 minutes). 8 To record the entire program within the actual remaining disc space Select FR (JUST) in a recording mode selection procedure.

Advanced Recording (VHS)

Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/DVD switch to DVD. Press VHS so that the VHS lamp lights up on the unit.
Note that this function is available only for timer programing recording ( pg. 31, 32).
8 To record the entire program by specifying the desired recording time Select FR60FR360, FR420 or FR480 in a recording mode selection procedure. ( pg. 28, 31, 32) 8 To record a 25-min. long daily program five times just on the same DVD disc for example Perform VCR Plus+ Timer Programing ( pg. 31) procedure. Be sure to set the recording mode to FR125 and set Weekly/Daily Rec Function to MONFRI in step 6 to fit the total recording time to the whole disc space.
A: 1st B: 2nd C: 3rd D: 4th E: 5th

C.RESET

When the same program is recorded in SP mode instead of in FR125, the 5th program cannot be recorded.
Blank A: 1st B: 2nd C: 3rd D: 4th E: Blank (20 min.)
You can program this unit to timer-record, regardless of the disc remaining time. When the disc remaining time is not enough, recording may stop in the middle of a program. To avoid this, make sure of the disc remaining time before setting timer programing. (Example) If you programed to timer-record for 60 minutes in SP mode on a 120-minute disc, the disc remaining time would be 30 minutes in XP mode, 60 minutes in SP mode, 120 minutes in LP mode, 180 minutes in EP mode, and 240 minutes in FR480 mode. Timer-recording will not complete beyond these remaining times. The maximum recording time of FR (JUST)mode is the same as the recording time of FR480 mode. When timer programing a long program in FR (JUST)mode on a disc whose remaining time is short, it is recommended to check the disc remaining time in FR480 mode to see if the remaining time is enough for the program. Even if more than one program are timer programed in FR (JUST) mode, only the first one is recorded. In order to ensure that the recording fits on the disc, this feature may leave a slight non-recorded section at the end of the disc. There may be some noise and sound disturbance at the point on the disc where the unit switches the mode.

7 Press rt w e to select PREVIEW, then press ENTER to preview the edited title. 8 Press rt w e to select EXECUTE, then press ENTER.
If you do not want to delete the scene, select CLEAR and press ENTER.
2 Press rt w e to select a title you want to protect, then press
9 Press w e to select YES, then press ENTER. The selected
To cancel the deletion, press w e to select NO, then press ENTER.

scene is deleted.

3 Press w e to select PROTECT, then press ENTER.
To cancel the protection, repeat again.
4 Press NAVIGATION to return to the normal screen.
All the titles on a disc will be deleted once the disc is formatted even if they are protected titles. ( pg. 64)
To modify the points A Press w e to select CLEAR, then press ENTER. B Repeat steps as necessary.
10 Press NAVIGATION to return to the normal screen.
There may be a discrepancy of several seconds between the scene you intend to edit, and the scene which is actually edited. Available recording capacity may not match the deleted part after deletion.

Page 64

MV5S_00.book Page 65 Monday, September 12, 2005 11:16 AM
Modify Play List Information
8 Press w e to select PREVIEW, then press ENTER to preview

the play list.

9 Press w e to select EXECUTE, then press ENTER. The play
list is created. To modify the points A Press w e to select CLEAR, then press ENTER. B Repeat steps as necessary.
There may be a discrepancy of several seconds between the scene you intend to edit, and the scene which is actually edited. The title, index and category of the play list can be modified in the same way as ORIGINAL. ( pg. 63) You can modify the play list that has just been created here by adding, moving, or deleting unwanted parts to create a digest edition, etc.
Add Scenes To A Play List
CH +/ MEMO ENTER NAVIGATION rtwe
1 Perform steps 1 to 3 of Create Play List ( pg. 65) before
2 Press w e to select the play list to which you wish to add a

scene, then press t.

3 Press w e to select EDITING, then press ENTER. 4 Press w e to select ADD

DELETE SCENE MOVE SCENE

ADD SCENE

SCENE.

5 Press 4 to start playback. The
playback pictures appear in the window on the screen. The elapsed playing time starts counting with the arrow on IN.
RETURN OK SELECT PREVIEW NAVIGATION EXIT EXECUTE

-:--:--:--:--:--:-: : :

To locate the beginning of other titles, press 2/6.

SONG SONG

another. mp3
01SONG 02SONG 03SONG 04SONG 05SONG 06SONG
07SONG 08SONG 09SONG 10SONG 11SONG 12SONG
SONG SONG SONG 1 SONG SONG 2 SONG
1 Perform steps 1 to 4 of Locating The Desired Group And
Tracks above before continuing.
RETURN OK SELECT NAVIGATION EXIT SELECT WITH [CURSORS] THEN PRESS [ENTER]
Name of the inserted disc. Sort buttons (MP3 / JPEG) Selected group number/total number of groups on the disc Group name Return button (RETURN) Group name/Created date File type indicator
2 Press rt w e to select the desired item, then press MEMO in
The order number appears on the left of the track name. Repeat this step as necessary. To cancel the track, press rt w e to select the track, then press CANCEL. Pressing CLEAR (8) clears all the order numbers.

the desired order.

: MP3 : JPEG H Selected file I Selected file number/total number of files in the group that
contains the selected file J Title number/file name
To quit the Program Playback, press 8. Repeat playback can be performed if it is set as such on the onscreen bar. ( pg. 53)
It is not possible to select tracks and images simultaneously. It is not possible to select tracks or images in other groups.
On completion of the playback of all the items A Perform steps 1 to 4 of Locating The Desired Group And Tracks above. B Press CLEAR (8).
The order numbers are reset and cleared.
C Press NAVIGATION to complete the procedure.

Page 68

Filename [MV5S_11TocSubsidiary.fm]
MV5S_00.book Page 69 Monday, September 12, 2005 11:16 AM
Remote control setting.. 70
How to change the code or how to operate your TV set with this remote control.

For better sound.. 71

Using Dolby Digital or DTS equipment
It can be more useful by changing your settings! For DVD operations.. 72 For VHS operations.. 75 Format... 78
Before you start recording on a new disc

Finalize.. 79

To play back a disc on other DVD players
Tips for your trouble.. 80 Specifications.. 84 Appendix Language code list.. 85 What do you want to know? Terms . 86 WARRANTY (Only in U.S.A.).. 87

Page 69

Filename [MV5S_12RemoSys.fm]
MV5S_00.book Page 70 Monday, September 12, 2005 11:16 AM

REMOTE CONTROL

Remote Control Functions
Remote Control 1/2/3/4 Code Switching

 

Technical specifications

Full description

For those with a collection of VHS recordings they would like to continue to use or archive onto DVD, JVC offers the DR-MV5S, which combines all of the features of DR-M100S DVD recorder with a VHS VCR featuring JVC's VHS Progressive Scan and a one-touch intelligent dubbing system. The dubbing system includes three new features: auto record speed optimizer - calculates total recording time on VHS tape then automatically selects the most suitable recording speed for dubbing to DVD; auto thumbnail creation - automatically creates video thumbnail chapter references when dubbing to DVD based on the number of recordings on the tape; auto blank-cut dubbing - eliminates blank space between recordings on the tape being dubbed when recording to DVD or HDD. In addition, VHS playback is possible during DVD recording, and DVD playback is possible during VHS recording.

General
Product TypeDVD recorder/ VCR combo
Width17.1 in
Depth13.5 in
Height3.8 in
System
A/V System Recommended UseHome
Parental LockYes
Audio System
Output ModeStereo
Digital Audio FormatDolby Digital output, DTS digital output
Dolby Digital Sound CapabilityYes
Connectors
Coaxial Digital OutputYes
DVD
TypeDVD recorder
Media TypeCD-R, CD-RW, DVD-RAM, SVCD, DVD-R, DVD+RW, DVD-RW, DVD+R, DVD, CD, Video CD
Recordable MediaDVD-RAM, DVD-R, DVD-RW
Video D/A Converter10bit / 54MHz
Audio D/A Converter24bit / 192kHz
Recording ModeXP, SP, LP, EP, FR
Programmability8 events / 1 month
Media Load TypeTray
Supported Digital Video StandardsMPEG-2
Supported Digital Audio StandardsPCM, MP3
DVD Features
Resume FunctionYes
Video Noise ReductionYes
DVD Additional FeaturesProgressive scanning, JPEG photo playback, input TBC
VCR
Device TypeVCR
Media TypeVHS
Video Head Qty4
Programmability8 events / 1 month
FeaturesAuto rewind, auto play, VHS progressive scan
Recording Features
Synchro StartYes
TV Tuner
Tuner Qty2
AutoClock SetYes
Video Features
S-VHS Playback CapableYes
Commercial SkipYes
Clock & Alarm
ClockYes
Built-in Display
Display DimmerYes
Remote Control
TypeRemote control
TechnologyInfrared
Connections
Connector Type1 x IEEE 1394 (FireWire/i.LINK) ( 4 pin FireWire ) - front 1 x composite video/audio input ( RCA phono x 3 ) - front 1 x S-Video input ( 4 pin mini-DIN ) - front 1 x component video output ( RCA phono x 3 ) - rear Composite video/audio output - rear S-Video output - rear RF input - rear RF output - rear
Universal Product Identifiers
BrandJVC
Part NumberDR-MV5S
GTIN00046838018534

 

Tags

2400 08 CFD-S33 Singer 6210 N600C SCS135 Sdvic Server HT-S7300 BT 250V Cube S800 1380 A1 PCM9X Icfc303 42PFL3604 Pocket X-MAX 125 Abit KD7A Finepix A350 S6120D Player 26S81B AJ3940 Nokia N85 YP-T7FZS Signature Mpro120 Rekordbox Sport-hatch WD-90150FB Wide Zoom GC4420 02 Ry30160 MFC-620CN Cavalier 1997 LDC-650 Xtc 2200 Atlantic 500 HMC012KD1 TS-H192C DV4400 Review DX6340 CF-21F80KX LE22A455c1C FO-IS110N 8 Cnip Spectra AF Omnia CM1929 RL29thcsw STU1130-00G 10 0 AG-A850-P CV-3720S G Elna 8300 Digital S Whammy HT502 Nerfoop Nokia 5230 ZAP 6 Lexmark P350 Annexe A IP1500 Psla3 IC-U82 RX500 GV-HIA5 XL3200 Gekko Album FS-210 Gt MS-7519 Deskpro 386 UX-D57CL GF7050V-m7 SE M5-S5331 66 S Uniden 410 Witl 106 R231T CLP-315W XEU ZWF5125 CD 572 Roland TD-9 Xv-n322 DEH-P5100UB DMR-HS1 Mac 2200 MO-735 EVS3000 ALU-LW 25PT4523 78-8846 MZ-33 WD-12210BD Eater Avicc-C-8DVD-II XDV-D500 CMT-J1MD

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101