Reviews & Opinions
Independent and trusted. Read before buy JVC GR-D320E!

JVC GR-D320E

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
JVC GR-D320e Digital Camcorder & Video Recorder, size: 2.5 MB
Related manuals
JVC GR-D320e/ek
JVC GR-D320EK

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

JVC GR-D320EAbout JVC GR-D320E
Here you can find all about JVC GR-D320E like manual and other informations. For example: review.

JVC GR-D320E manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a JVC GR-D320E please write about it to help other people.

 

[ Report abuse or wrong photo | Share your JVC GR-D320E photo ]

Video review

You& 39;ve got a friend

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

(Be careful not to cover this area, a sensor necessary for shooting is built-in here.) c Stereo Microphone d Stud Hole ( pg. 16) e Tripod Mounting Socket ( pg. 16) f Cassette Holder Cover ( pg. 17)

Connectors

The connectors are located beneath the covers. Q Audio/Video Output Connector [AV] ( pg. 22, 33) R DC Input Connector [DC] ( pg. 12) S Digital Video Connector [DV OUT] (i.LINK*) ( pg. 34, 35)
* i.LINK refers to the IEEE1394-1995 industry specification and extensions thereof. The logo is used for products compliant with the i.LINK standard.

Indicators

T POWER/CHARGE Lamp ( pg. 12, 18)
MasterPage: Left GR-D340PAL.book Page 10 Thursday, November 10, 2005 5:01 PM
10 EN GETTING STARTED LCD Monitor/Viewfinder Indications

During Video Recording

10 x 3 1/5 B/W 6 7

r t y u i o

R Wipe/Fader Mode Indicator ( pg. 31) S Wind Cut Indicator ( pg. 25) T Time Code ( pg. 25) U Manual Focus Adjustment Indicator
( pg. 28) Brightness Control Indicator (LCD monitor/ Viewfinder) ( pg. 16)

BRIGHT

V Date/Time ( pg. 15)

1.1.2006

During Video Playback

25min 12BIT

a Auto/Manual Mode Indicator
A : Auto Mode M : Manual Mode B : Night-Scope Indicator ( pg. 27) : Gain Up Mode ( pg. 24) C Shutter Speed ( pg. 32) D White Balance Indicator ( pg. 30) E Effect Mode Indicator ( pg. 31) F Program AE Mode Indicator ( pg. 32) G SOUND 12BIT/16BIT: Sound Mode Indicator ( pg. 24) (Appears for approx. 5 seconds after turning on the camcorder). H Battery Remaining Power Indicator ( pg. 38) I Approximate Zoom Ratio ( pg. 19) J Zoom Indicator ( pg. 19) K Digital Image Stabiliser ( pg. 24) L Wide16:9 Mode Indicator ( pg. 27) M Recording Speed Mode (SP/LP) ( pg. 24) (Only LP Indicator is displayed) N Tape Running Indicator ( pg. 18) (Rotates while tape is running). O Tape Remaining Time ( pg. 18) P REC: (Appears during recording). ( pg. 18) PAUSE: (Appears during Record-Standby mode). ( pg. 18) PHOTO: (Appears when taking snapshot). ( pg. 27) Q : Spot Exposure Control Indicator ( pg. 29) : Backlight Compensation Indicator ( pg. 29) : Iris Lock Indicator ( pg. 29) : Exposure Adjustment Indicator ( pg. 28)
BLANK SEARCH PUSH "STOP" BUTTON TO CANCEL

VOLUME

15:29:03

1:15 PM 1.1.2006

( pg. 38)

Provided Accessories

a b c d
AC Adapter AP-V17E or AP-V14E Power Cord (only for AP-V14E) Battery Pack BN-VF707U Audio/Video Cable(3.5 mini-plug to RCA plug) e Shoulder Strap ( pg. 12 for attachment) f Lens Cap ( pg. 12 for attachment)

NOTES:

In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder. Make sure to use the provided cables for connections. Do not use any other cables.
MasterPage: Left GR-D340PAL.book Page 12 Thursday, November 10, 2005 5:01 PM
How To Attach The Lens Cap
To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.
This camcorders 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.
To confirm the lens cap is on correctly make sure the cap is flush to the camcorder.
Charging The Battery Pack

Battery pack mount

Battery pack

PUSH BATT.

Place here during shooting.
How To Attach The Shoulder Strap

Follow the illustration.

POWER/ CHARGE lamp
1 Thread the strap through the eyelet. 2 Fold it back and thread it through the strap

guide and the buckle.

To adjust the length of the strap, loosen and then tighten the strap in the buckle.

To DC connector

To AC outlet
3 Slide the strap guide fully towards the eyelet.

Buckle Strap guide

Power switch AC Adapter (ex. AP-V17E)
1 Set the Power Switch to OFF. 2 With the arrow on the battery pack pointing
downward, push the battery pack slightly against the battery pack mount a.
3 Slide down the battery pack until it locks in

place b.

4 Connect the AC Adapter to the camcorder. 5 Connect the Power Cord to the AC Adapter.

(AP-V14E only)

Eyelet
6 Plug the AC Adapter into an AC outlet. The
POWER/CHARGE lamp on the camcorder blinks to indicate charging has started.
7 When the POWER/CHARGE lamp goes out,
charging is finished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder.
MasterPage: Start_Right GR-D340PAL.book Page 13 Thursday, November 10, 2005 5:01 PM
To detach the battery pack
Slide the battery pack upward while pressing PUSH BATT. to detach it.
Battery pack BN-VF707U* BN-VF714U BN-VF733U * Provided Charging time Approx. 1 hr. 30 min. Approx. 2 hr. 40 min. Approx. 5 hr. 40 min.

Using The Battery Pack

Perform steps in Charging The Battery Pack. Maximum continuous recording time

Battery pack BN-VF707U* BN-VF714U BN-VF733U * Provided LCD monitor on 1 hr. 30 min. 3 hr. 7 hr. Viewfinder on 1 hr. 40 min. 3 hr. 25 min. 8 hr.
It is recommended that only genuine JVC batteries are used in this camcorder. Using generic non-JVC batteries can cause damage to the internal charging circuitry. If the protective cap is attached to the battery pack, remove it first. During charging, the camcorder cannot be operated. Charging is not possible if the wrong type of battery is used. When charging the battery pack for the first time or after a long storage period, the POWER/ CHARGE lamp may not light. In this case, remove the battery pack from the camcorder, then try charging again. If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one. Since the AC Adapter processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas. Using the optional AA-VF7 Battery Charger, you can charge the BN-VF707U/VF714U/VF733U battery pack without the camcorder. After 5 minutes has elapsed in Record-Standby mode with the cassette inserted, and no operation is performed (T PAUSE indicator may not appear), the camcorder will automatically turn off its power supplied from the AC adapter. In this case, the battery charge starts if the battery is attached to the camcorder.
Recording time is reduced significantly under the following conditions: Zoom or Record-Standby mode is engaged repeatedly. The LCD monitor is used repeatedly. The playback mode is engaged repeatedly. Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

ATTENTION:

Before detaching the power source, make sure that the camcorders power is turned off. Failure to do so can result in a camcorder malfunction.

Data Battery System

You can check the remaining battery power and the recordable time. 1) Make sure the battery is attached and the Power Switch is set to OFF. 2) Open the LCD monitor fully. 3) Press DATA, and the battery status screen appears. It is displayed for 5 seconds if the button is pressed and released quickly, and for 15 seconds if the button is pressed and hold for several seconds. If COMMUNICATION ERROR appears instead of the battery status even though you tried to press DATA several times, there may be a problem on the battery. In such a case, consult your nearest JVC dealer.

Before continuing, perform the procedures listed below: Power ( pg. 12) Loading A Cassette ( pg. 17) Power Zoom Lever

Tape Remaining Time

Approximate tape remaining 62 min time appears on the display. ---min means the camcorder is calculating the remaining time. When the remaining time reaches 2 minutes, the indication starts blinking.
The time required to calculate and display the remaining tape length, and the accuracy of the calculation, may vary according to the type of tape used.
POWER/CHARGE Lamp Power Switch Recording Start/Stop Button
LCD Monitor And Viewfinder
While using the LCD monitor: Make sure the viewfinder is pushed back in. Pull on the end of the LCD monitor and open the LCD monitor fully. It can rotate 270 (90 downward, 180 upward).
1 Remove the lens cap. ( pg. 12) 2 Open the LCD monitor fully. 3 Set the Power Switch to REC while pressing
The POWER/CHARGE lamp lights and the camcorder enters the Record-Standby mode. T PAUSE is displayed. To record in LP (Long Play) mode, pg. 24.
4 To start recording, press the Recording Start/
Stop Button. T REC appears on the display while recording is in progress.
5 To stop recording, press the Recording Start/
Stop Button again. The camcorder re-enters the Record-Standby mode. Approximate recording time
Tape 30 min. 60 min. 80 min. Recording mode SP 30 min. 60 min. 80 min. LP 45 min. 90 min. 120 min.
While using the viewfinder: Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully.
The image will not appear simultaneously on the LCD monitor and the viewfinder. When the viewfinder is pulled out while the LCD monitor is opened, you can select which one to use. Set PRIORITY to the desired mode in SYSTEM Menu. ( pg. 23, 25) Coloured bright spots may appear all over the LCD monitor or the viewfinder. However, this is not a malfunction. ( pg. 37)
If the Record-Standby mode continues for 5 minutes and no operation is performed (T PAUSE indicator may not appear), the camcorders power shuts off automatically. To turn the camcorder on again, push back and pull out the viewfinder again or close and re-open the LCD monitor. When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape. To avoid this, refer to Recording From The Middle Of A Tape ( pg. 20). To turn the melody sounds off, pg. 23, 25.

SYSTEM

The SYSTEM functions which are set when the Power Switch is set to REC are also applied when the Power switch is set to PLAY. [ ] = Factory-preset. MELODY OFF: Even though not heard while shooting, shutter sound is recorded on the tape. [ON]: A melody sounds when any operation is performed. It also activates the shutter sound effect. ( pg. 27) CAM RESET EXECUTE: Resets all settings to the factorypreset. [RETURN]: Does not reset all settings to the factory-preset. PRIORITY [LCD]: The image is displayed on the LCD monitor when the viewfinder is pulled out while the LCD monitor is opened. FINDER: The image is displayed in the viewfinder when the viewfinder is pulled out while the LCD monitor is opened.
LCD: Keeps the camcorders display (except the date, time and time code) from appearing on the connected TV screen. [LCD/TV]: Makes the camcorders display appear on screen when the camcorder is connected to a TV. TIME CODE [OFF]: Time code is not displayed. ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording ( pg. 19). DEMO MODE OFF: Automatic demonstration will not take place. [ON]: Demonstrates certain functions such as Wipe/Fader and Effect, etc., and can be used to confirm how these functions operate. Demonstration starts in the following cases:

DISPLAY

The menu settings can be changed only when the Power Switch is set to REC. The DISPLAY settings except BRIGHT and LANGUAGE are effective only for shooting.
When the Menu Screen is closed after DEMO MODE is turned ON. With DEMO MODE set to ON, if there is no operation for about 3 minutes after the Power Switch is set to REC. Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
[ ] = Factory-preset BRIGHT pg. 16, Brightness Adjustment Of The Display CLOCK ADJ. pg. 15, Date/Time Settings
If a cassette is in the camcorder, the demonstration cannot be turned on. DEMO MODE remains ON even if the camcorder power is turned off. If DEMO MODE remains ON, some functions will not be available. After viewing demo, set to OFF.
MasterPage: Left GR-D340PAL.book Page 26 Thursday, November 10, 2005 5:01 PM
BRIGHT pg. 16, Brightness Adjustment Of The Display. DATE/TIME [OFF] / ON

Playback Menus

[ ] = Factory-preset SOUND MODE and NARRATION During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on page 23, select SOUND MODE or NARRATION from the Menu Screen and set it to the desired parameter. The settings below are effective only for video playback except BRIGHT and REC MODE. The parameters (except OFF in ON SCREEN, SOUND MODE and NARRATION settings) are the same as in the description on ( pg. 24). REC MODE [SP*] / LP

[OFF]: The date/time does not appear. ON: The date/time is always displayed. ON SCREEN OFF / [LCD] / LCD/TV
When set to OFF, the camcorders display disappears. TIME CODE [OFF] / ON pg. 19, Time Code
Allows you to set the video recording mode (SP or LP) depending on your preference. * SP indicator does not appear on the screen. SOUND MODE [STEREO ]: Sound is output on both L and R channels in stereo. SOUND L : Sound from the L channel is output. SOUND R : Sound from the R channel is output. NARRATION Although it is not possible to perform audio dubbing with this camcorder, you can hear sound from an audio-dubbed tape during playback using this function. [OFF]: Original sound is output on both L and R channels in stereo. ON: Dubbed sound is output on both L and R channels in stereo. MIX: Original and dubbed sounds are combined and output in stereo on both L and R channels.
MasterPage: Start_Right GR-D340PAL.book Page 27 Thursday, November 10, 2005 5:01 PM

FEATURES FOR RECORDING

Wide Mode
This camcorder allows you to choose the type of image output format for recording. [ ] = Factory-preset
Snapshot (Record Still Image On Tape)
This feature lets you record still images that look like photographs onto a tape.
1 Set the Power Switch to REC. 2 Press 16:9 button repeatedly to choose your

selection.

4:3 16:9
1 Set the Power Switch to REC. 2 Press SNAPSHOT.

Night-Scope

Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed.
1 Set the Power Switch to REC. 2 Set the recording mode to M. ( pg. 14) 3 Press NIGHT so that the Night-Scope

indicator

The shutter speed is automatically adjusted to provide up to 30 times sensitivity. appears beside while the shutter speed is being automatically adjusted.

appears.

To deactivate Night-Scope Press NIGHT again so that the Night-Scope indicator disappears.
During Night-Scope, GAIN UP or DIS in SETTING Menu pg. 24 cannot be activated. Night-Scope cannot be activated simultaneously with SNOW or SPORTS of PROGRAM AE, or all modes of SHUTTER. pg. 32 During Night-Scope, it may be difficult to bring the camcorder into focus. To prevent this, use of a tripod is recommended.

To lock the exposure control and the iris After step 3, adjust the exposure by pressing or. Then lock the iris in steps 4 - 6. For automatic locking, select AUTO in step 3. The exposure control and the iris become automatic.
Backlight compensation brightens the subject quickly. With simple operation, backlight compensation feature brightens the dark subject portion by increasing the exposure.
You cannot use the Spot Exposure Control at the same time with following functions. 16:9 in WIDE MODE ( pg. 27) STROBE in EFFECT ( pg. 31) Digital Zoom ( pg. 19) Depending on the shooting location and condition, optimum result may not be attained.
1 Set the Power Switch to REC. 2 Set the recording mode to M ( pg. 14). 3 Press BACKLIGHT so that the Backlight
Compensation indicator appears.
4 Adjust zoom so that the subject fills the LCD
or to select the desired spot metering area frame.
MasterPage: Left GR-D340PAL.book Page 30 Thursday, November 10, 2005 5:01 PM

White Balance Adjustment

The white balance refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional colour/ tint reproduction. To change the setting Set W.BALANCE in FUNCTION Menu ( pg. 24)
Manual White Balance Adjustment
Adjust the white balance manually when shooting under various types of lighting.

to REC.

White paper

2 Set the recording

mode to M ( pg. 14).
3 Hold a sheet of plain white paper in front of
the subject. Adjust zoom or position yourself so that the white paper fills the screen.
The selected mode indicator except AUTO appears.
[AUTO]: White balance is adjusted automatically. MWB: Adjust the white balance manually when shooting under various types of lighting. ( Manual White Balance Adjustment) FINE: Outdoors on a sunny day. CLOUD: Outdoors on a cloudy day. [ ] = Factory-preset To return to automatic white balance Set W.BALANCE to AUTO. ( pg. 24)
4 Select FUNCTION Menu. ( pg. 24) 5 Select MWB in W.BALANCE menu.
( pg. 24), then press and hold SET or until begins blinking. When the setting is completed, stops blinking.
6 Press SET or to engage the setting. 7 Press MENU. The Menu Screen closes and
the Manual White Balance indicator displayed. is
In step 3, it may be difficult to focus on the white paper. In such a case, adjust focus manually. ( pg. 28) A subject can be shot under various types of lighting conditions indoors (natural, fluorescent, candlelight, etc.). Because the colour temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result. Once you adjust white balance manually, the setting is retained even if the power is turned off or the battery removed.

Core filter DV cable (optional)

To DV connector

PC with DV connector
Connect the DV cable first to the PC, and then to the camcorder. Connect the DV cable (plugs) correctly according to the shape of the DV connector.
REFERENCES GR-D340PAL.book Page 36 Thursday, November 10, 2005 5:01 PM
MasterPage: Heading0_Left

TROUBLESHOOTING

The LCD monitor or viewfinder indications blink.
Effect and DIS functions that cannot be used together are selected at the same time. HRe-read the sections Effects and DIS. ( pg. 23, 24)
If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.) and wait a few minutes; and then re-connect it and proceed as usual from the beginning.
Digital Zoom does not work.
25X optical zoom is selected. HSet ZOOM to 50X or 800X. ( pg. 24)

Video Playback

The tape is moving, but there is no picture.
Your TV has AV input terminals, but is not set to its VIDEO mode. HSet the TV to the mode or channel appropriate for video playback. ( pg. 22) The cassette holder cover is open. HClose the cassette holder cover. ( pg. 17)

No power is supplied.

The power is not connected properly. HConnect the AC Adapter securely. ( pg. 14) The battery pack is not attached firmly. HDetach the battery pack once again and re-attach it firmly. ( pg. 12) The battery is dead. HReplace the dead battery with a fully charged one. ( pg. 12)
Blocks of noise appear during playback, or there is no playback picture and the screen becomes blue.
HClean the video heads with an optional cleaning cassette. ( pg. 41)

Video Recording

Recording cannot be performed.
The tapes erase protection tab is set to SAVE. HSet the tapes erase protection tab to REC. ( pg. 17) TAPE END appears. HReplace with new cassette. ( pg. 17) The cassette holder cover is open. HClose the cassette holder cover.

Advanced features

The focus does not adjust automatically.
Focus is set to the Manual mode. HSet Focus to the Auto mode. ( pg. 28) The lens is dirty or covered with condensation. HClean the lens and check the focus again. ( pg. 39)
When shooting a subject illuminated by bright light, vertical lines appear.
This is not a malfunction.
Snapshot mode cannot be used.
The 16:9 wide mode ( 16:9 indicator) is selected. HDisengage the ( 16:9 indicator) 16:9 wide mode. ( pg. 27)
When the screen is under direct sunlight during shooting, the screen becomes red or black for an instant.
During recording, the date/ time does not appear.
DATE/TIME is set to OFF. HSet DATE/TIME to ON. ( pg. 23, 25)
MasterPage: Start_Right GR-D340PAL.book Page 37 Thursday, November 10, 2005 5:01 PM
The colour of Snapshot looks strange.
The light source or the subject does not include white. Or there are various different light sources behind the subject. HFind a white subject and compose your shot so that it also appears in the frame. ( pg. 27)

SET DATE/TIME! appears.

The date/time is not set. HSet the date/time. ( pg. 15) The built-in clock battery has run out and the previously set date/time has been erased. HConsult your nearest JVC dealer for replacement.
The image taken using Snapshot is too dark.
Shooting was performed under backlit conditions. HPress BACKLIGHT. ( pg. 29)
When the image is printed from the printer, a black bar appears at the bottom of the screen.
This is not a malfunction. HBy recording with DIS de-activated ( pg. 23, 24) this can be avoided.
The image taken using Snapshot is too bright.
The subject is too bright. HSet PROGRAM AE to SPOTLIGHT. ( pg. 32)
When the camcorder is connected via the DV connector, the camcorder does not operate.
The DV cable was plugged/unplugged with power turned on. HTurn the camcorders power off and on again, then operate it.
White Balance cannot be activated.
The Sepia (SEPIA) or Monotone (MONOTONE) mode is activated. HDisengage the Sepia (SEPIA) or Monotone (MONOTONE) mode before setting White Balance. ( pg. 31)
Images on the LCD monitor appear dark or whitish.
In places subject to low temperature, images become dark due to the characteristics of the LCD monitor. This is not a malfunction. HAdjust the brightness and angle of the LCD monitor. ( pg. 16, 18) When the LCD monitors fluorescent light reaches the end of its service life, images on the LCD monitor become dark. HConsult your nearest JVC dealer.

The image looks like the shutter speed is too slow.
When shooting in the dark, the unit becomes highly sensitive to light when GAIN UP is set to AUTO. HIf you want the lighting to look more natural, set GAIN UP to AGC or OFF. ( pg. 23, 24)

Other problems

The POWER/CHARGE lamp on the camcorder does not light during charging.
Charging is difficult in places subject to extremely high/low temperatures. HTo protect the battery, it is recommended to charge it in places with a temperature of 10C to 35C. ( pg. 40) The battery pack is not attached firmly. HDetach the battery pack once again and re-attach it firmly. ( pg. 12)
Coloured bright spots appear all over the LCD monitor or the viewfinder.
The LCD monitor and the viewfinder are made with high-precision technology. However, black spots or bright spots of light (red, green or blue) may appear constantly on the LCD monitor or the viewfinder. These spots are not recorded on the tape. This is not due to any defect of the unit. (Effective dots: more than 99.99 %)
The cassette will not load properly.
The batterys charge is low. HInstall a fully charged battery. ( pg. 12)
MasterPage: Left GR-D340PAL.book Page 38 Thursday, November 10, 2005 5:01 PM
TAPE! Appears if a tape is not loaded when the Recording Start/Stop Button or SNAPSHOT Button is pressed while the Power Switch is set to REC. TAPE END Appears when the tape ends during recording or playback. SET DATE/TIME! Appears when the date/time is not set. ( pg. 15) The built-in clock battery has run out and the previously set date/time has been erased. Consult your nearest JVC dealer for replacement. LENS CAP
Picture does not appear on the LCD monitor.
The viewfinder is pulled out and PRIORITY is set to FINDER. HPush the viewfinder back in or set PRIORITY to LCD. ( pg. 23, 25) The LCD monitors brightness setting is too dark. HAdjust the brightness of the LCD monitor. ( pg. 16) HIf the monitor is tilted upward 180 degrees, open the monitor fully. ( pg. 18)
An error indication (or 06) appears.
A malfunction of some kind has occurred. In this case the camcorders functions become unusable. ( pg. 38)

Warning Indications

Displays the battery remaining power.
Remaining power level High Exhausted
Appears for 5 seconds after power is turned on if the lens cap is attached or when it is dark. HDV Appears when pictures recorded in the HDV format are detected. The pictures in the HDV format cannot be played back with this camcorder. UNIT IN SAFEGUARD MODE REMOVE AND REATTACH BATTERY OR DC PLUG The error indications (01, 02 or 06) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer. UNIT IN SAFEGUARD MODE EJECT AND REINSERT TAPE The error indications (03 or 04) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and reinsert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

As the battery power comes close to nil, the battery remaining power indicator blinks. When the battery power is exhausted, power turns off automatically. Appears if a tape is loaded. ( pg. 17) Blinks when no tape is loaded. ( pg. 17) CHECK TAPES ERASE PROTECTION TAB Appears when the erase protection tab is set to SAVE while the Power Switch is set to REC. ( pg. 14) USE CLEANING CASSETTE Appears if dirt is detected on the heads during recording. Use an optional cleaning cassette. ( pg. 41) CONDENSATION, OPERATION PAUSED PLEASE WAIT Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.
MasterPage: Start_Right GR-D340PAL.book Page 39 Thursday, November 10, 2005 5:01 PM

USER MAINTENANCE

Cleaning The Camcorder
Before cleaning, turn off the camcorder and remove the battery pack and AC Adapter. To clean the exterior Wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. To clean the LCD monitor Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor. To clean the lens Blow it with a blower brush, then wipe gently with lens cleaning paper. To clean the viewfinder lens Remove dust from the viewfinder using a blower brush.
Avoid using strong cleaning agents such as benzine or alcohol. Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. Mould may form if the lens is left dirty. When using a cleaner or chemically treated cloth refer to the cautions of each product. To clean the viewfinder, please consult your nearest JVC dealer.
MasterPage: Heading0_Left GR-D340PAL.book Page 40 Thursday, November 10, 2005 5:01 PM

CAUTIONS

Terminals It is normal for the battery pack to be warm after charging, or after use. Temperature Range Specifications Charging: 10C to 35C Operation: 0C to 40C Storage: 20C to 50C The lower the temperature, the longer recharging takes. Charging times are for a fully discharged battery pack.

Battery Packs

The supplied battery pack is a lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: To avoid hazards
To prevent damage and prolong service life
. do not burn. do not short-circuit the terminals. When transporting, make sure the provided battery cap is attached to the battery. If the battery cap is misplaced, carry the battery in a plastic bag. do not modify or disassemble. do not expose the battery to temperatures exceeding 60C, as this may cause the battery to overheat, explode or catch fire. use only specified chargers.

Power requirement AC 110 V to 240 Vd, 50 Hz/60 Hz Output DC 11 V G, 1 A Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change without notice.
MasterPage: Start_Right GR-D340PAL.book Page 43 Thursday, November 10, 2005 5:01 PM
AC Adapter.. 14 Auto/Manual Mode... 14
Shutter Effect.. 32 Snapshot Mode... 27 Sound Mode.. 24, 26 Speaker Volume.. 21 Specifications.. 42 Spot Exposure Control.. 29
Backlight Compensation.. 29 Battery Pack.. 12, 14, 40 Blank Search.. 21
Changing The Menu Settings. 23 Charging The Battery Pack.. 12 Connection To A Personal Computer. 35 Connections To A TV Or VCR.. 22
Tape Speed (REC MODE).. 24, 26 Tele Macro... 24 Time Code.. 19, 25 Tripod Mounting.. 16 Troubleshooting.. 36
Data Battery... 13 Date/Time Settings.. 15 Demonstration Mode.. 25 Digital Image Stabilisation (DIS).. 24 Dubbing... 33, 34
Warning Indications.. 38 White Balance.. 30 Wide Mode... 27 Wipe Or Fader Effects.. 31
Effect Mode.. 31 Exposure Control.. 28

Zooming... 19, 24

Iris Lock.. 29
LCD Monitor and Viewfinder.. 16, 18 Loading A Cassette.. 17
Manual Focus.. 28 Melody... 25 Motor Drive Mode.. 27

Night-Scope... 27

Playback Sound.. 26 Power-Linked Operation.. 15 Priority.. 25 Program AE... 32

Quick Review.. 20

Recording Capacity Tape... 18
MasterPage: BackCover GR-D340PAL.book Page 44 Thursday, November 10, 2005 5:01 PM
Printed in Malaysia 1105MAR-PR-VM
2005 Victor Company of Japan, Limited

 

Tags

HR-V510E 8920G 55C7000 Pets018 CY-M9054EUC 190 SE 145-56g VR Elna 2007 Pool 3 DX6050 GR-P197WVS Nokia 6810 MG-605A ICF-C707 LAC6900RIN Vision GPS 18 Macintosh Compact 340 Stereo Taav521 Beocom 2500 KDL-40EX705 G2020HD Titan Ferrari Aprimatic T1E ZWS2105W Sagem D50T XV-N33 WM-EX7 CPS-7 CDR777-00S I845D 2003 R2 MG16 6FX ZDM6814 SGH-T319 41 Accu SA3085 02 ERZ36700X8 SPP-A941 SNU5600-00 PDW-530 ES-6000HS 32VT68N Review Adapter Minolta ISW A1200 AT-160 BC120XLT KL-8200 EPL-5900L PEG-TJ25 E1 Revenge Suite KDL-52X3500 CBD 1163 Electro-voice Q66 D-LUX Explorer 340 Pocket 42PFL9632D-10 Controller YST-SW012 Nubira VCE-150 XM-450G XM-440EX A-402R ICC21-codestelecommande K1000 Digia II XRC5300X Kxtg8220G MHC-EC50 Audi TTS UE-40C6500UW GN 1000 If-ed II Vikings Astra OPC Server MC-8044NLC Coolpix L11 32LD7200 BO4901 Ms702h2 B1930N Harmonyman 1200MU 7 2 TD-8841 Tracker 2003 Orbit XDM6825 C5100 HT502SH KX-FP373FX V50LCD

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101