INSTRUCTIONS

ENGLISH

LYT0880-001A

COMPACT VHS CAMCORDER
GR-SXM740 GR-SXM540 GR-SXM340 GR-AXM240 GR-SX970

For Customer Use:

Enter below the Model No. and Serial No. which is located on the bottom of the camcorder. Retain this information for future reference. Model No. Serial No. S-VHS is compatible with GR-SXM740/SXM540/ SXM340/SX970 only
U Printed in Malaysia 1101MKV UN PJ
COPYRIGHT 2001 VICTOR COMPANY OF JAPAN, LTD
Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read PRECAUTIONS ( pg. 3, 4) to ensure safe use of this product.

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when DEMO MODE is set to ON (factory-preset).
Available when the Power Switch @ is set to or . Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume. DEMO MODE remains ON even if the camcorder power is turned off. To cancel Automatic Demonstration, set the Power Switch @ to and press the MENU Wheel 1 in while the demo is in progress. This takes you directly to the demo modes Setting Menu (so you will not have to go through the main Menu Screen). Rotate the MENU Wheel 1 to select OFF and press it. NOTES: When a tape whose Erase Protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available. If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor* or viewfinder.
* Applicable models only.

PROVIDED ACCESSORIES

AC Adapter AP-V12U, AP-V11U or AP-V10U

Cassette Adapter C-P7U

Remote Control Unit RM-V715U (GR-SXM740 only)
CD-ROM (GR-SXM740/ SXM540 only)

Battery Pack BN-V11U

Lens Cap
AAA (R03) Battery x 2 (for Remote Control Unit, GR-SXM740 only)
AA (R6) Battery (for Cassette Adapter)

Shoulder Strap

PC Connection Cable (GR-SXM740/SXM540 only)
NOTE: In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

PRECAUTIONS

SAFETY PRECAUTIONS

CAUTIONS

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION:

This camcorder is designed to be used with NTSC-type color television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor*/viewfinder playback are possible anywhere. Use the JVC BN-V11U/V12U/V20U/V400U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
NOTES: The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit. The rating information and safety caution of the AC Adapter are on its upper and lower sides. ATTENTION: The product that you have purchased is powered by a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.

Cassettes marked

can be used used with this camcorder.
The EPA certified RBRC Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates JVC is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. JVCs involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.

AC Adapter... pg. 6 Animation Recording.. pg. 21, 24 Audio Dubbing.. pg. 24 Auto Date Record.. pg. 19 Auto Focus... pg. 18 Auto Shut Off... pg. 11
Picture Stabilizer.. pg. 12 Playback... pg. 11 Playback Special Effects.. pg. 14 Playback Zoom... pg. 24 Program AE with Special Effects.. pg. 23 Provided Accessories.. pg. 2
Battery Pack.. pg. 6, 26 Blue Filter Effect.. pg. 23 Brighten The Image.. pg. 18 Brighten The LCD Monitor.. pg. 11

Quick Review... pg. 13

Recording, Advanced Features. pg. 22, 23 Recording, Start/Stop.. pg. 11 Recording Format (S-VHS/S-VHS ET).. pg. 20 Recording Mode.. pg. 20 Record-Standby.. pg. 11 Red Filter Effect.. pg. 23 Remote Control... pg. 24 Retake... pg. 13 Rewind The Tape... pg. 11
Cassette Adapter... pg. 16 Charge Marker... pg. 6 Charging The Battery Pack.. pg. 6 Classic Film Effect.. pg. 23 Clean The Camcorder... pg. 27 Connection To a VCR/TV... pg. 15 Connection To A PC.. pg. 16 Counter Memory.. pg. 14
Self-Recording.. pg. 11 Sepia Mode.. pg. 23 Shoulder Strap Attachment.. pg. 8 Snapshot... pg. 12 Snapshot During Playback.. pg. 12 Solarization Effect.. pg. 23 Specifications... pg. 28 Sports Mode... pg. 23 Still Playback.. pg. 11 Stretch Effect... pg. 23 Strobe Effect.. pg. 23 Super LoLux (S.LX).. pg. 19 Super VHS Expansion Technology. pg. 20
Darken The Image... pg. 18 Darken The LCD Monitor... pg. 11 Date/Time Display.. pg. 19 Date/Time Settings... pg. 7 Demonstration Mode.. pg. 1, 21 Digital Effects... pg. 23 Digital Zoom... pg. 20 Diopter Adjustment... pg. 8
Electronic Fog Filter Mode.. pg. 23 Erase Protection... pg. 8 Exposure Control... pg. 18
Tape Counter... pg. 14 Tape Dubbing... pg. 15 Tape Length Setting.. pg. 21 Tele Macro... pg. 21 Time Base Corrector.. pg. 14 Time-Lapse Shooting... pg. 21, 24 Tracking.. pg. 14 Tripod Mounting.. pg. 8 Twilight Mode... pg. 23
Fade-In/Out.. pg. 22 Fast-Forward Tape... pg. 11 5-Second Recording Mode.. pg. 12

Grip Adjustment.. pg. 8

High Speed Shutter Mode.. pg. 23
Insert Editing.. pg. 24 Instant Titles... pg. 19

Unload A Tape.. pg. 8

Video Echo Effect... pg. 23 Video Light... pg. 13 Viewfinder Adjustment.. pg. 8
LCD Monitor/Viewfinder, Indications. pg. 9, 10, 17 Load A Tape... pg. 8
Manual Focus... pg. 18 Menu Screen.. pg. Monotone Effect.. pg. 23 Mosaic Effect... pg. 23
White Balance Adjustment.. pg. 19 Wide Mode... pg. 20 Wipe-In/Out.. pg. 22

Zooming.. pg. 13

ND Effect Mode... pg. 23 Nega/Posi Mode.. pg. 23 Night-Alive... pg. 22

GETTING STARTED

Hook on.

USING THE BATTERY PACK

Perform step 1) of CHARGING THE BATTERY PACK.
Approximate recording time (unit: min.) Battery pack Push in. BN-V11U BN-V12U (optional) Viewfinder on LCD monitor on
95 (50) 95 (50) 150 (85) 360 (205)
100 (50) 100 (50) 165 (90) 385 (210)
80 (45) 80 (45) 135 (75) 315 (190)

BATTERY RELEASE Switch

BN-V20U (optional) BN-V400U (optional)

Battery pack

1 When using models equipped with LCD monitor 2 When using GR-SX970
( ): when the video light is on Power Switch To DC IN connector AC Adapter To AC outlet

USING AC POWER

Connect the AC Adapter to the camcorder ( step 2) and 3) of CHARGING THE BATTERY PACK). The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V. ATTENTION Before detaching the power source, make sure that the camcorders power is turned off. Failure to do so can result in a camcorder malfunction.
CHARGING THE BATTERY PACK
1) Hook the end of the battery pack to the camcorder and push the battery in until it locks in place. If the battery pack is attached in the wrong position, a malfunction may occur. 2) Set the Power Switch @ to OFF. Connect the AC Adapter to the DC IN connector 9. 3) Plug the AC Adapter into an AC outlet. The CHARGE lamp * blinks to indicate charging has started. 4) When the CHARGE lamp * stops blinking but stays lit, charging is finished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder. To Detach The Battery Pack. slide BATTERY RELEASE 8 and pull out the battery pack.
Battery pack BN-V11U BN-V12U (optional) BN-V20U (optional) BN-V400U (optional) Charging time approx. 1 hr. 30 min. approx. 1 hr. 30 min. approx. 2 hrs. 20 min. approx. 4 hrs. 30 min.

REFRESH:

Be sure to fully discharge a battery pack before recharging or storing it for a long period of time, otherwise the battery performance will be reduced. 1) Perform steps 1) through 3) of CHARGING THE BATTERY PACK. 2) Press REFRESH r for over 2 seconds. The REFRESH lamp ( blinks to indicate discharging has started. 3) When discharging is finished, charging automatically starts and the CHARGE lamp * blinks.
Charge marker helps you remember whether the battery pack has been charged or not. Two colors are provided (red and black)you choose which one means charged and which means discharged.
Charging times are for a fully discharged battery pack.
During charging or discharging, the camcorder cannot be operated. Charging and discharging is not possible if the wrong type of battery is used. When charging the battery pack for the first time or after a long storage period, the CHARGE lamp * may not light. Remove the battery pack from the camcorder, then try charging again. If a fully-charged batterys operation time remains extremely short, the battery is worn out. Please purchase a new one. Perform charging where the temperature is between 10C and 35C (50F and 95F). 20C to 25C (68F to 77F) is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete. Charging time varies according to the ambient temperature and the status of the battery pack. Since the AC Adapter processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas. The following operation stops charging or discharging: , or . Set the Power Switch @ to Disconnect the AC Adapter from the camcorder. Unplug the AC Adapter from the AC outlet. Detach the battery from the camcorder. Using the optional AA-V15 AC Power Adapter/ Charger, you can charge the BN-V11U/V12U/ V20U/V400U battery pack without the camcorder. However, it cannot be used as an AC adapter. To avoid interference with reception, do not use the AC Adapter near a radio. Recording time is reduced significantly when Zoom or Record-Standby mode is engaged repeatedly or the LCD monitor* is used repeatedly. Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

a s d f 3

0 ! @ # $ % ^ & * ( ) q w e r t y u
FF Button (Functions the same as &) PAUSE Button.. pg. 11 A.DUB Button.. pg. 24 INT.TIME Button.. pg. 24 SELF TIMER Button (non-functional) Tape Remaining Time... pg. 21 Recording Mode Indicator.. pg. 20 Digital Effect Indicator.. pg. 23 Program AE Indicator.. pg. 23 Night-Alive Indicator*2.. pg. 22 Fade/Wipe-Standby Indicator.. pg. 22 Recording Format Indicator (S/S-ET)*4.. pg. 20 Tape Length Indicator... pg. 21 Zoom Indicator Bar.. pg. 13 Zoom Level Indicator Approximate Zoom Ratio Recording Indicator... pg. 11 Digital Effect Indicator... pg. 23 Program AE Indicator.. pg. 23 Night-Alive Indicator*2.. pg. 22 Fade/Wipe-Standby Indicator.. pg. 22 Picture Stabilizer Indicator.. pg. 12 Interval Time/Recording Time Indicator.. pg. Sec. Rec Mode Indicator*3.. pg. 12 Bright Level Indicator*1... pg. 11 Instant Title Display.. pg. 19 Date/Time Display.. pg. 19 Focus Indicator... pg. 18 Exposure Control Level Counter.. pg. 18 White Balance Mode Indicator.. pg. 19 S-VHS/S-VHS ET Recording Indicator*4.. pg. 20 Record-Standby Mode Indicator. pg. 11 : Cassette Indicator.. pg. 8 w: Insert Editing Indicator*6.. pg. 24 TBC Indicator.. pg. 14 Playback Special Effect Indicator*2. pg. 14 Recording Format Indicator (S/S-ET)*4.. pg. 20 Tape Counter.. pg. 14, 24 Recording Mode Indicator (SP/EP). pg. 20 Tape Running Indicator 4 : Playback 3 : Fast-Forward/Shuttle Search 2 : Rewind/Shuttle Search 6 : Pause e 4: Audio Dubbing*6 Tracking Indicator.. pg. 14 Tape Counter*6.. pg. 24 BRIGHT: Bright Level Indicator*1.. pg. 11 VOLUME: Speaker Volume Indicator*1.. pg. 11

*1 *2 *3 *4 *5 *6

Applicable models only. GR-SXM740/SXM540/SXM340 only. GR-AXM240/SX970 only. GR-SXM740/SXM540/SXM340/SX970 only. GR-SXM740/SXM540 only. GR-SXM740 only.

RECORDING

Set REC MODE, S-VHS (S-VHS ET)**, TAPE LENGTH and DATE/TIME in SYSTEM MENU. ( pg. 18 21, MENU SETTINGS)

PLAYBACK

1 Load a tape ( pg. 8, Loading/Unloading A Cassette).
Set the Power Switch @ to . To start playback, press 4/6 ^ or T. To stop playback temporarily (Still Playback), press 4/6 ^ or s. To stop playback, press 5 $. Press 2 % to rewind, or 3 & to fast-forward the tape. High-speed picture search (Shuttle Search) is possible by pressing 2 % or 3 & during playback (holding 2 % or 3 & down during playback continues search until released). To resume normal playback, press 4/6 ^ or T. For VIDEO RECORDING/VIDEO PLAYBACK The camcorder shuts off automatically after about 5 minutes in the Record-Standby or Stop mode. To turn on again, set the Power Switch @ to. OFF, then to , or When the Power Switch @ is set to , or and the LCD monitor* is opened at an angle of 60 degrees or more, the LCD monitor* switches on and the viewfinder switches off automatically to save power. The playback picture can be viewed in the viewfinder (with the LCD monitor* shut), on the LCD monitor* or on a connected TV ( pg. 15, Connections To A TV/VCR). To remove the indications, pg. 21, DISPLAY or OSD OUTPUT in SYSTEM MENU. To control the speaker* volume, slide VOL. 3 towards + to turn up, or towards to turn down. While shooting, sound is not heard from the speaker*. If TBC ( pg. 14) is engaged during Still Playback, noise bars will not appear (GR-SXM740/SXM540/SXM340 only).

1 Remove the lens cap. Set the Power Switch @
to or . Shooting while using the viewfinder: Make sure the LCD monitor* is closed and locked. Shooting while using the LCD monitor*: Make sure the LCD monitor* is fully open. The camcorder enters the Record-Standby mode and PAUSE ) is displayed. If you tilt the LCD monitor* upward to 180 degrees, the viewfinder switches back on and the monitored image can be viewed both on the LCD monitor* and in the viewfinder, so the person you shoot can view himself/herself.
2 Press the Recording Start/Stop Button !.
appears while recording is in progress. To stop recording, press the Recording Start/Stop Button !. The camcorder re-enters the RecordStandby mode. To Adjust The Brightness Of The LCD Monitor*, rotate the BRIGHT Wheel 1 until the bright level indiator # on the display moves and the appropriate brightness is reached.
* Applicable models only. ** GR-SXM740/SXM540/SXM340/SX970 only.
Tapes recorded on S-VHS or S-VHS ET ( pg. 18, 20) cannot be played back correctly on a normal VHS VCR. To playback on a regular VHS VCR, use a VHS tape and select S-VHS ET (OFF) in SYSTEM MENU ( pg. 18, 20).

BASIC FEATURES

Snapshot
(GR-SXM740/SXM540/SXM340 only)
5Sec. Rec (5-sec. Recording)

(GR-AXM240/SX970 only)

You can record still images that look like photographs onto a tape. 1) Perform step 1 of RECORDING ( pg. 11). 2) Press SNAPSHOT 2. There is a momentary camera shutter-type blackout together with the sound effect of a shutter closing. Snapshot is also available during playback. However, the shutter sound is not heard.

Picture Stabilizer

To compensate for unstable images caused by camera-shake, particularly at high magnification. ! appears. 1) Press P. STABILIZER 4. 2) To switch off the Picture Stabilizer, press ! disappears. P. STABILIZER 4. Accurate stabilization may not be possible in certain conditions including excessive hand shake. ! appears blinking if the Stabilizer cannot be used. This function cannot be activated during the Night-Alive, CLASSIC FILM, STROBE and VIDEO ECHO modes ( pg. 23, Digital Effects).
To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programs. 1) Make sure the recording mode is set to SP. 2) During RecordStandby, press 5SEC. REC 2. 5S @ appears and 5Sec. Rec is reserved. 3) Press the Recording Start/Stop Button. Recording starts, and after 5-second recording is finished, the camcorder reenters the Record Standby mode automatically. 4) To cancel the 5Sec. Rec. function, press 5SEC. 5S @ disappears. REC 2 again so that Fade/Wipe ( pg. 22) cannot be activated by pressing 5SEC. REC 2.

Zooming

To produce the zoom in/out effect. Digital circuitry extends the maximum magnification offered by optical zoom. This system is called Digital Zoom. Slide the Power Zoom Lever 3 towards T to zoom in, or W to zoom out. The further you slide the Power Zoom Lever 3, the quicker the zoom action. Focusing may become unstable during Zooming. In this case, set the zoom while in Record Standby, lock the focus by using the manual focus ( pg. 18, FOCUS in CAMERA MENU), then zoom in or out in Record mode. The zoom level indicator 6- moves during zoom. Once the zoom level indiator 6reaches the top, all magnification from that point is through digital processing. When using Digital Zoom, the quality of image may suffer. To deactivate Digital Zoom, set D.ZOOM ( pg. 20) to OFF in SYSTEM MENU. Digital zoom cannot be used when the VIDEO ECHO mode ( pg. 23, Digital Effects) is activated.

Eliminates noise bars that appear on-screen during playback. To activate Manual Tracking: 1) Press the TRACKING Wheel 1 for approx. 2 seconds. MT i appears. 2) Rotate the TRACKING Wheel 1 so that the noise bars disappear. To return to Auto Tracking, press the TRACKING Wheel 1 for approx. 2 seconds or set the Power again. AT i Switch @ to OFF and then blinks. When Auto Tracking finishes, the indication disappears. When noise bars appear during playback, the camcorder enters the Auto Tracking mode and AT i appears. Manual Tracking may not work with tapes recorded on other VCRs or camcorders.

Counter Memory

Makes it easier to locate a specific tape segment. 1) Press COUNTER R/M ) and hold for more than 1 second. The counter t resets to 0:00:00. 2) Press COUNTER R/M ) for less than 1 second. M appears. 3) After recording or playback, press 5 $, then 2 %. The tape automatically stops at or close to 0:00:00. 4) Press 4/6 ^ to start playback. The counter memory functions in the FastForward and Rewind modes. To disable the counter memory function, press COUNTER R/M ) for less than 1 second so that M disappears.
Playback Special Effects (GR-SXM740/

SXM540/SXM340 only)

TBC (Time Base Corrector)
Removes jitter from fluctuating video signals to deliver a stable picture even with old tapes. To activate/release the TBC mode, press TBC 4 during playback for more than 1 second. When the TBC mode is activated, TBC w is displayed. The TBC indicator w turns green (gray with a camcorder equipped with a black/white viewfinder) while TBC is working, and white while TBC is not operative. TBC does not work during Still Playback and Shuttle Search ( pg. 11). It may take a few seconds before TBC actually starts working. The picture may be distorted if the TBC mode is activated or deactivated at the edit-in/-out points or when normal playback resumes after Still Playback or Shuttle Search ( pg. 11). If the playback picture is distorted when TBC is set to on, turn off TBC.
Allows you to add creative effects to the playback image. ( pg. 23, Digital Effects) 1) Activate TBC and Auto Tracking. 2) Press DIGIFECT w repeatedly until the desired mode e appears. To cancel the effect, select OFF. NEGA POSI, MOSAIC and STRETCH are not available. Playback Special Effects do not work during Shuttle Search ( pg. 11). The selected effect mode cannot be changed during Still Playback ( pg. 11).

Sliding Latch

You can transfer image data from the camcorder to a PC using Digital Photo Navigator. When connecting to your PC, refer to the instruction manuals of the PC and Setup Guide for the provided software.
When connecting to a Macintosh. The optional KEYSPAN USA-19 USB PDA Adapter is required. Macintosh is a registered trademark of Apple Computer, Inc. Keyspan is a trademark of InnoSys Inc.
Compartment Door Recording Safety Hole Hole

Reels Battery Cover

R T Y U I O P a s d f
0M I N SET REC S P N I GH T x
SET SP : 23 : 45 T BC MONO T ON E AT
S VHS REC MWB P AU S E 5M I N 1 / 2S BR I GH T 6 + CONGRA T U L A T I ON S D E C 2 5. AM : : 1 8

MENU SETTINGS

CAMERA MENU
If correct focus cannot be obtained with AUTO FOCUS, set to MANU to use manual focusing. appears. To focus on a farther subject, rotate the MENU Wheel 1 upward. 1 appears and blinks. To focus on a nearer subject, rotate the MENU Wheel 1 downward. 4 appears and blinking. If the lens is smeared or blurred, accurate focusing is not possible. When shooting a subject close to the lens, zoom out first ( pg. 13, Zooming). If zoomed in in the auto focus mode, the camcorder could automatically zoom out depending on the distance between the camcorder and the subject. This does not occur with TELE MACRO ( pg. 21) in SYSTEM MENU. Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a certain subject in the wide-angle position, sharply focused images cannot be obtained when zoomed in because the depth-of-field is reduced at longer focal lengths. When the focus level cannot be adjusted any farther or closer, or will blink.
1 Set the Power Switch @ to . 2 Press the MENU Wheel 1 in. The Menu
Screen appears. Rotate the MENU Wheel 1 to select the desired function. To go from CAMERA MENU to SYSTEM MENU, rotate the MENU Wheel 1 to select 4TO SYSTEM MENU and press it. SYSTEM MENU is composed of 2 pages. To go to the next page, rotate the MENU Wheel 1 to select 4NEXT and press it. To return to CAMERA MENU from page 2 of SYSTEM MENU, rotate the MENU Wheel 1 to select 4TO CAMERA MENU and press it.
CAME RA ME NU T O S Y S T EM ME NU F OCU S E X POS UR E M.W. B. S. LX T I TLE DA T E / T I ME D I S P. R E T URN S Y S T EM MENU NE X T SP R E C MOD E D. Z OOM 50x OF F W I DE VHS ON S T30 T A P E L E NG T H D I S P L AY FUL L OS D OU T P U T ON

TAPE LENGTH

Allows you to set the tape length depending on the tape used: T20=20 minutes, T30=30 minutes, T35=35 minutes, T40=40 minutes. Tape remaining time 1 is correct only if the correct tape length has been selected.

TELE MACRO

When set to ON, you can shoot a subject as large as possible at a distance of approx. 60 cm (23-5/8"). Depending on the zoom position, the lens may go out of focus.
DISPLAY FULL: Makes all of the indications appear on the LCD monitor*/viewfinder during playback or recording. SIMPLE: Makes the following indications disappear from the LCD monitor*/viewfinder during , tape remaining time, recording or playback: , tape length ( pg. 9, 17).

OSD OUTPUT

ON: On-screen indications are displayed. OFF: On-screen indications are turned off except Date/Time, Instant Title and Warning Indication.

REC TIME

You can shoot a series of pictures, each slightly different, of the same object for a brief selected period of time (Animation). REC MODE should be set to SP. Select the desired recording time and press the Recording Start/Stop Button ! after focusing on the subject. The remote control can also be used for this setting*. ( pg. 24, Animation And Time-Lapse) Fade- or wipe-in/out cannot be performed. This function is canceled when the power is shut off or when the cassette is ejected.

*GR-SXM740 only

TITLE LANG. Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE) of TITLE in CAMERA MENU. After selection, the TITLE setting menu ( p. 19) appears automatically. DATE/TIME Allows you to set the current date and time. ( pg. 7) DEMO MODE Demonstrates certain functions automatically. Available when the Power Switch @ is set to or and DEMO MODE is set to ON (factorypreset). Performing any operation during the demonstration stops the demonstration temporarily. Set to OFF to stop completely. When a tape whose erase protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available. If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor* or viewfinder.

INT. TIME

You can record sequentially at preset time spans. Leaving the camcorder aimed at a specific subject, you can record subtle changes over an extended period of time (Time-Lapse). REC MODE should be set to SP. Select the desired interval time and press the Recording Start/Stop Button !. The remote control can also be used for this setting*. ( pg. 24, Animation And Time-Lapse) Fade- or wipe-in/out cannot be performed. This function is canceled when the power is shut off or when the cassette is ejected.

When using the AC Adapter in areas other than the USA The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V. USING HOUSEHOLD AC PLUG ADAPTER In case of connecting the units AC Adapter to an AC wall outlet other than American National Standard C73 series type use an AC plug adapter, called a Siemens Plug, as shown. For this AC plug adapter, consult your nearest JVC dealer. Plug adapter. avoid prolonged uncharged storage. remove from charger or powered unit when not in use, as some machines use current even when switched off. It is normal for the battery pack to be warm after charging, or after use. Temperature Range Specifications Charging. 10C to 35C (50F to 95F) Operation. 0C to 40C (32F to 104F) Storage. 10C to 30C (14F to 86F) Recharging time is based on room temperature of 20C (68F). The lower the temperature, the longer recharging takes.
Cassettes Video Light (for applicable models)
To properly use and store your cassettes, be sure to read the following cautions: 1. During use. make sure the cassette bears the S-VHS-C or VHS-C mark. be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals. make sure the cassette is positioned properly when inserting. do not load and unload the cassette repeatedly without allowing the tape to run at all. This slackens the tape and can result in damage. do not open the front tape cover. This exposes the tape to fingerprints and dust. 2. Store cassettes. away from heaters or other heat sources. out of direct sunlight. where they wont be subject to unnecessary shock or vibration. where they wont be exposed to strong magnetic fields (such as those generated by motors, transformers or magnets). vertically, in their original cases.

DANGER:

The video light becomes extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result. Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time. When operating, keep a distance of about 30 cm (11-13/16) between the video light and people or object. Do not use near flammable or explosive materials. It is recommended that you consult your nearest JVC dealer for replacing the video light.

The battery packs are nickel-cadmium or nickel metal-hydride batteries. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: 1. To avoid hazard. do not burn. do not short-circuit the terminals. do not modify or disassemble. use only specified chargers.

Terminals

2. To prevent damage and prolong service life. do not subject to unnecessary shock. avoid repeated charging without fully discharging. charge in an environment where temperatures are within the tolerances shown in the chart below. This is a chemical reaction type batterycooler temperatures impede chemical reaction, while warmer temperatures can prevent complete charging. store in a cool, dry place. Extended exposure to high temperatures will increase natural discharge and shorten service life.
4. To protect the unit, DO NOT. allow it to become wet. drop the unit or strike it against hard objects. subject it to shock or excessive vibration during transportation. keep the lens directed at extremely bright objects for long periods. direct the eyepiece of the viewfinder at the sun. carry it by holding the viewfinder or the LCD monitor*. Be sure to hold the main unit with both hands or use the grip. * Applicable models only. swing it excessively when using the shoulder strap.
LCD Monitor (for applicable models)
1. To prevent damage to the LCD monitor, DO NOT. push it strongly or apply any shocks. place the camcorder with the LCD monitor on the bottom. 2. To prolong service life. avoid rubbing it with coarse cloth. 3. Be aware of the following phenomena for LCD monitor use. These are not malfunctions: While using the camcorder, the surface around the LCD monitor and/or the back of the LCD monitor may heat up. If you leave power on for a long time, the surface around the LCD monitor becomes hot.
Avoid using strong cleaning agents such as benzine or alcohol. Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. Mold may form if the lens is left dirty. When using a cleaner or chemically treated cloth, refer to the cautions that came with it. When removing the eyepiece, be sure to hold the viewfinder securely.

For GR-SXM740/SXM540U Owners: Declaration of Conformity Model Number Trade Name Responsible party Address Telephone Number GR-SXM740/SXM540U JVC JVC AMERICAS CORP. 1700 Valley Road Wayne, N. J. 07470 : 973-3155000 : : : :
How To Handle a CD-ROM (for applicable models)
Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the center hole using a circular motion. Do not use conventional disc cleaners or cleaning spray. Do not bend the CD-ROM or touch its mirror surface. Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct sunlight. About moisture condensation. You may have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass outer surface. This same phenomenon occurs on the head drum of a camcorder when it is moved from a cool place to a warm place, after heating a cold room, under extremely humid conditions or in a place directly subjected to the cool air from an air conditioner. Moisture on the head drum can cause severe damage to the video tape, and can lead to internal damage to the camcorder itself. Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For Your Maintenance

1. After Use
1 Set the Power Switch to OFF to turn off the camcorder. 2 Open the LCD monitor* to an angle of over 60 degrees. Slide
EJECT to open the cassette holder, then remove the cassette.
3 Close and lock the cassette holder by pressing the Close

button.

4 Close and lock the LCD monitor*. 5 Slide BATTERY RELEASE to remove the battery pack. 6 Attach the provided lens cap to the camcorders lens.
2. Cleaning The Camcorder
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Change or modifications not approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

1 Wipe gently the exterior with a soft cloth. Put cloth in diluted
mild soap and wring it well to wipe off heavy dirt, then wipe again with a dry cloth.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
2 Open the LCD monitor* and wipe it gently with a soft cloth.
Be careful not to damage the monitor. Close the LCD monitor*.
3 Blow the lens with a blower brush, then wipe it gently with

lens cleaning paper.

4 Turn the eyepiece counterclockwise and pull it out. 5 Remove dust from the viewfinder using a blower brush. 6 Re-attach the eyepiece and turn it clockwise.

SPECIFICATIONS

Camcorder

General

Format Power source : S-VHS (GR-SXM740/SXM540/ SXM340/SX970 only)/VHS NTSC standard : DC 11 V (Using AC Adapter) DC 6 V (Using battery pack) Viewfinder : Electronic viewfinder with 0.55" color LCD (GR-SX970 only) Electronic viewfinder with 0.5" black/white CRT (GR-SXM740/ SXM540/SXM340/AXM240 only)
Power consumption Viewfinder on : 4.0 W (GR-SXM740/SXM540/ SXM340/AXM240 only) 3.7 W (GR-SX970 only) LCD monitor* on : 4.5 W (GR-SXM740/SXM540/ SXM340/AXM240 only) Video light : 3.0 W
Signal system : NTSC-type Video recording system Luminance : FM recording Color : Converted sub-carrier direct recording Conforms to VHS standard Cassette : / cassette Tape speed SP : 33.35 mm/sec. (1-5/16 ips) EP : 11.12 mm/sec. (7/16 ips) Recording time (max.) SP : 40 minutes EP : 120 minutes (with TC-40 cassette) Operating temperature : 0C to 40C (32F to 104F) Operating humidity : 35% to 80% Storage temperature : 20C to 50C (4F to 122F) Weight : Approx. 930 g (2.1 lbs) (GR-SXM740 only) Approx. 910 g (2.0 lbs) (GR-SXM540/SXM340/AXM240 only) Approx. 820 g (1.8 lbs) (GR-SX970 only) Dimensions : 200 mm x 112 mm x 118 mm (W x H x D) (7-7/8" x 4-7/16" x 4-11/16") (GR-SXM740/SXM540/SXM340/ AXM240 only) 200 mm x 112 mm x 115 mm (7-7/8" x 4-7/16" x 4-9/16") (GR-SX970 only) (with the LCD monitor* closed and with the viewfinder fully tilted downward)
White balance adjustment : Auto/Manual adjustment LCD monitor : 3.5" diagonally measured, LCD (Applicable models panel/TFT active matrix system only) (GR-SXM740 only) 3" diagonally measured, LCD panel/TFT active matrix system (GR-SXM540 only) 2.5" diagonally measured, LCD panel/TFT active matrix system (GR-SXM340/AXM240 only) Speaker : Monaural (Applicable models only)

Connectors

Video Audio : 1 V (p-p), 75 unbalanced, analog output (via Video output connector) : 300 mV (rms), 1 k analog output (via Audio output connector) : 3.5 mm, 4-pole, mini-head jack

8.64 8.64 6.86 8.13 4.06 4.06 4.06 4.06 3.30 4.06 3.30 6.60 6.60 6.60 6.60 3.30 3.56 6.35 6.35 3.56 3.56 3.30 5.08 5.08 2.42 2.42 3.53 6.84 8.72 8.15 7.60 7.30 7.30 8.00 6.90 6.90 7.00

DMC-LC20E-S 9.91

DMC-LC33E-S 9.65
Panasonic Panasonic Panasonic Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax
Panasonic Camcorders Panasonic Camcorders Panasonic Camcorders Pentax *ist Pentax *ist Pentax EI Pentax EI Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax Optio Pentax OptioS Pentax SLR's Pentax SLR's Pentax SLR's Pentax SLR's Pentax SLR's
NVGS200B VDRM50B VDRM70B D DS 330 330GS 330RS 33L 33LF 33WR 430 430RS 43WR 555 750Z MX MX4 S30 S4 S40 S4i S50 S5i SV NULL ist DS ist D Optio S5n Optio WP Optio SV
12.60 14.60 14.60 12.95 12.45 10.41 12.70 10.41 9.40 9.14 10.41 9.14 10.41 10.92 8.13 9.14 9.14 8.13 9.91 9.91 9.91 9.91 10.41 10.41 8.89 8.38 8.89 8.38 8.89 8.38 9.14 8.38 12.50 12.90 8.30 10.20 9.15
7.50 8.90 8.90 9.40 9.40 6.60 7.11 6.35 6.10 5.84 6.35 5.84 6.35 6.60 7.62 5.84 5.84 7.62 5.84 5.84 5.84 6.10 7.37 7.37 5.84 5.08 5.84 5.08 5.84 5.08 5.59 5.08 9.25 9.45 5.20 5.10 5.60
7.00 6.40 6.40 6.10 6.60 4.83 5.59 4.32 3.56 3.56 4.32 3.56 4.32 4.32 3.05 3.56 3.56 3.05 4.06 4.06 4.06 4.32 5.84 5.84 2.54 2.03 2.54 2.03 2.54 2.03 2.79 2.03 6.60 6.00 2.20 2.20 2.80
Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Pentax Philips Philips Philips Philips Philips Pioneer Research Pioneer Research Pioneer Research Pioneer Research Pioneer Research Pioneer Research Polaroid Polaroid Polaroid Polaroid Polaroid Polaroid Polaroid Polaroid Polaroid Polaroid Polaroid Polaroid Polaroid Pretec Electronics Ricoh
Pentax SLR's Pentax SLR's Pentax SLR's Pentax SLR's Pentax Compact Zooms Pentax Compact Zooms Pentax Compact Zooms Pentax Compact Zooms Pentax Compact Zooms Pentax Compact Zooms Pentax Compact Zooms Philips VGA FunCam Philips Wearable 2 Philips Wearable 2 Philips ESP Philips KEY SeaLife Reefmaster DC100 SeaLife Reefmaster DC200 SeaLife Reefmaster DC250 SeaLife Reefmaster DC300 SeaLife Reefmaster DC310 SeaLife Reefmaster DC310 Pro Set Polaroid Polaroid iON Polaroid PDC Polaroid PDC Polaroid PDC Polaroid PDC Polaroid PDC Polaroid PhotoMAX Polaroid PhotoMAX Polaroid PhotoMAX Polaroid PhotoMAX Polaroid PhotoMAX Polaroid PhotoMAX Pretec iPen Ricoh Caplio

SiPix SC SiPix SC SiPix SC SiPix SP SiPix StyleCam SiPix StyleCam SiPix StyleCam SiPix StyleCam SiPix StyleCam SiPix StyleCam SiPix StyleCam SiPix StyleCam SiPix StyleCam SiPix StyleCam SiPix StyleCam SiPix WEB Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam DCR Sony Handycam Vision Sony Handycam Vision
2300 Deluxe Share NULL Blink Blink II Blink II Deluxe DV100 Extreme Groove Pro Rave Snap 3 TRV6E TRV70 TRV730 TRV740 TRV80 TRV820 TRV820E TRV830 TRV840 TRV9 TRV900 TRV900E TRV950 TRV950 VX1000 VX1000E VX2000 VX2000E VX2100 NULL CCD-TR87
12.19 11.68 11.43 12.19 8.64 5.08 5.59 6.10 10.41 9.91 9.40 8.89 9.40 6.10 6.10 10.41 17.02 17.53 22.61 20.57 17.02 21.84 21.84 22.61 20.57 17.27 19.30 19.30 16.76 20.32 33.02 33.02 34.29 34.29 39.37 19.05 19.05
7.11 7.62 7.11 7.11 5.84 5.08 5.59 6.10 6.86 7.37 5.59 6.10 5.59 6.10 6.10 6.35 9.40 9.14 10.16 10.16 9.40 12.19 12.19 10.16 10.16 10.41 10.41 10.41 9.14 9.91 14.48 14.48 14.48 14.48 16.00 10.92 10.92
4.83 5.08 5.08 4.83 2.54 1.52 1.52 1.78 2.79 3.56 3.81 2.29 3.81 1.78 1.78 3.81 7.11 7.37 8.89 8.38 7.37 11.18 11.18 8.89 8.38 8.64 9.40 9.40 7.11 9.40 10.92 10.92 11.43 11.43 11.94 10.92 10.92
Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony Sony
Sony Handycam Vision Sony Handycam Vision Sony DCM Sony DSR Sony DSR Sony DSR Sony DSR Sony DSR Sony DSR Sony Handycam Sony Handycam Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD Sony Handycam CCD
CCD-TRV65 CCD-TRV87 M1 200A 250P PD100A PD150 PD170 PD1P DCR-TRV50 HDR-FX1 TR416 TR516 TR67 TR818 TRV108 TRV118 TRV128 TRV16 TRV208E TRV25 TRV308 TRV308KITB TRV318 TRV328 TRV36 TRV37E TRV46 TRV48E TRV49E TRV57E TRV58 TRV608 TRV68 TRV78E TRV82
22.10 21.08 11.68 47.50 50.80 19.30 40.39 40.39 58.93 16.76 36.58 19.05 19.05 19.30 20.07 19.81 19.81 14.99 19.30 19.81 21.08 19.81 19.81 19.81 14.99 19.30 21.08 19.30 21.08 22.35 21.08 22.35 19.81 22.35 22.35 20.32

6.86 6.86 5.84 5.84 7.11 7.11 6.86 6.86 7.87 6.86 7.62 7.62 7.62 7.62 6.86 7.11 7.11 7.11 5.33 5.33 4.83 8.13 8.38 6.10 6.60 5.08 6.35 5.08 5.33 5.59 7.37 6.35 6.35 6.10 6.10 7.87 7.11
5.59 4.57 4.83 3.30 5.08 5.08 5.59 4.32 7.11 6.60 6.10 6.10 6.10 6.10 6.60 4.57 4.83 2.79 3.05 3.05 2.29 3.30 3.30 2.54 4.06 3.30 3.56 0.76 1.78 3.56 4.57 2.79 2.79 3.30 3.56 4.06 3.56
Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar Vivitar VuPoint Solutions VuPoint Solutions VuPoint Solutions VuPoint Solutions VuPoint Solutions Wolverine Data Wolverine Data Zoom Telephonics Zoom Telephonics Zoom Telephonics
Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam Vivitar ViviCam VuPoint VuPoint VuPoint VuPoint VuPoint Wolverine DIGICAM Wolverine DIGICAM Zoom DualCam 1300 Zoom DualCam 300 ZoomCam 100 USB
3555T DC-C210-VP DC-C310-VP DC-M10B4-VP DC-M30P-VP DC300 DC400 Model 1599 Model 1540 1550
9.91 9.65 9.14 9.40 10.92 10.92 10.41 10.67 10.67 12.95 9.91 10.41 10.92 10.41 9.40 11.68 9.65 11.18 10.41 10.92 9.65 10.67 9.40 8.38 8.89 8.89 8.89 5.59 12.19 9.65 10.41 9.91 9.91 9.91
6.10 5.33 7.87 5.59 6.60 7.87 6.60 7.11 7.11 7.62 6.35 6.60 6.86 6.60 5.59 6.60 6.60 7.62 6.60 6.86 5.08 6.35 6.35 5.84 5.33 6.10 6.10 3.81 5.08 3.30 6.35 5.08 6.60 6.60 6.60
3.56 3.05 3.56 3.81 3.81 3.56 3.30 5.08 5.08 4.57 4.32 3.30 5.08 4.57 3.56 4.32 3.81 4.32 4.83 6.60 3.05 4.06 3.56 2.03 2.54 1.78 1.78 1.27 0.51 2.54 2.79 3.81 2.79 2.79 2.79

DC-M30BT-VP 8.38

Size Compatability Chart
Digital/Analogue Cameras Model No Model Description EXPEDITION DCFC02 DCFC03 RANGE
DLMC00 DCFC01 Expedition Mini Camera Case Expedition Standard Camera Case Expedition Universal Camera Case Leather Micro Camera Case Leather Small Camera Case Leather Universal Camera Case Leather Convertible Hip/Shoulder Video Micro Camera Case Standard Camera Case

Video Cameras Large Small Medium

Medium

LEATHER RANGE VALUE RANGE
DLSC01 DLUC02 DLHV01 TPS001EU TPS002EU

EMEA Product Marketing

30/03/2005. Version 1. March 05

Cases Specs

Product Name

Product Code

DCFC01 DCFC02 DCFC03 DLMC00 DLSC01 DLUC02 DLHV01
Maximum Interior Dimensions
12 x 8 x 3 cm 12 x 10 x 4 cm 12 x 11 x 4.5 cm 12 x 7 x 3 cm 11 x 8 x 3 cm 13.5 x 9 x 4 cm 14 x 9 x 5 cm
Camera Compartment Dimensions
11 x 7 x 2.5 cm 11 x 9 x 3 cm 11 x 10 x 4 cm 10 x 6.5 x 2 cm 10 x 7 x 2 cm 12.5 x 8 x 3 cm 13 x 8 x 4 cm 10 x 6.5 x 2 cm 10 x 7 x 2 cm

External Dimensions

13 x 8 x 5 cm 13.5 x 11 x 8 cm 14 x 12.5 x 9 cm 13 x 7.5 x 4 cm 13 x 10 x 5 cm 17 x 10 x 9 cm 19 x 13 x 11 cm 13 x 7.5 x 4 cm 13 x 10 x 5 cm

Material

Colour

Weight

New! New! New! New! New! New! New! New! New!

EXPEDITION

Expedition Mini Camera Case Expedition Standard Camera Case Expedition Universal Camera Case Leather Micro Camera Case Leather Small Camera Case Leather Universal Camera Case Leather Convertible Hip/Shoulder Video
Nylon Nylon Nylon Leather Leather Leather Leather Nylon Nylon
Black & Grey Black & Grey Black & Grey Black Black Black Black Black Brown
0.08 kgs 0.12 kgs 0.15 kgs 0.07 kgs 0.12 kgs 0.17 kgs 0.31 kgs 0.05 kgs 0.10 kgs

LEATHER

Micro Camera Case Standard Camera Case
TPS001EU 12 x 7 x 3 cm TPS002EU 11 x 8 x 3 cm
30/03/2005. Version1. March 05 EMEA Product Marketing Management