DV Camcorder
GY-DV5100 BR-DV6000 BR-DV3000
DV Recorder with Editing Function DV Recorder
GY-DV5100 camcorder further strengthens the Professional DV lineup, which offers a complete DV solution from acquisition, through editing to archiving.
Feature highlights (all models)
Newly developed Standard DV/Mini DV compatible mechanism
Featuring a reel motor in addition to the capstan motor, as well as a new double-tension system, this latest mechanism provides not only improved running stability in horizontal and vertical operation, but also accommodates both Standard DV and Mini DV format cassettes without any adapter. Designed to professional standards, this mechanism facilitates high-speed operation, including high speed search and FF/REW at speeds up to 100x. Cueing is also faster and more accurate. This mechanism also features a built-in active/mechanical low-noise head cleaner that automatically cleans the heads each time a tape is loaded or the mode is changed.
Standard DV/Mini DV recording system
Sub code area Video area Head scanning direction Audio area 10 m 10 (NTSC)/12 (PAL) tracks for 1-frame signal recording Tape running direction

6.35 mm (1/4")

Up to 276 minutes*(4 hrs. 36 min.) of high-quality 8-bit, 13.5 MHz 4:1:1(NTSC)/ 4:2:0 (PAL) DV component digital images can be recorded on a standard DV tape, while up to 63 minutes** of recording is possible on MiniDV tapes. In either case, you know you'll be getting the high-quality, non-degradable images you need for top results in post-production editing. Impressive horizontal resolution of 540 TV lines or more is achieved regardless of signal input. In addition, DV signals can be recorded on a DVCAM tape.
* With an LA-DV276PRO tape. ** With an M-DV63 tape
The latest addition to JVCs Professional DV lineup, the new GY-DV5100 3-CCD camcorder offers enhanced image quality, improved operability, and greater convenience. In addition to the built-in Standard DV/Mini DV-compatible mechanism common to all our Professional DV models, the GY-DV5100 camcorder boasts an all-new 12-bit ADC and a 24-bit camera DSP with user selectable detail frequency positions for optimized video performance. Back in the editing room, you can transfer the GY-DV5100s quality images to the BR-DV6000 Professional DV editing recorder for fast, accurate tape-to-tape editing. Equipped with a comprehensive set of interfaces, this superb editor can work seamlessly with most video formats. Complete your DV solution with the compact, stylish BR-DV3000. Ideal for archiving and basic NLE, this simple, easy-to-use unit can be installed horizontally or in the space-saving vertical position. Together, these three models provide a complete Professional DV solution thats ideal for broadcasters, cable or high end production, yet they are within easy financial reach of any professional.
NTSC model shown with the optional DR-DV5000.
Advanced technologies to ensure stable high picture quality
From dust-clogged heads to the use of poor quality tape, the transport mechanism is potentially vulnerable to a number of factors that can produce picture noise. Consequently, JVC developed the following two technologies to minimize the effects of any such problems.
optimally calibrating the waveform with a pre-filter circuit, the VCO (voltage control oscillator) setup value is changed so that the reading of the clock phase is shifted to the position where the error (Before correction) (After correction) With block noise Without block noise rate is lowest. The result is accurate, consistent suppression of block noise and reliable, professional-standard performance at all times.

Sweeper head

Auto error correction system
Typically, when a recorded tape is played back, the signal can be read correctly because the players clock phase is set at the factory, and the error rate is kept to a minimum. However, with a low-quality tape, the playback image will be marred by block noise that is produced because the minimum error rate value and the clock phase are both adversely affected. As a result, there is either no minimum value or the error rate is abnormal. To compensate for this, JVC has developed an auto error correction system that operates on a frame-by-frame basis to ensure accurate error compensation under all conditions. After

Sweeper heads

During recording and playback, Upper drum to reduce the block noise which is caused by dust adhering to Record/play Record/play head the heads, our DV camcorder head and recorders incorporate an advanced Sweeper head drum assembly with specially designed sweeper heads. These dummy heads sweep off any magnetic material dropped by the tape or any dust that may have entered from outside the unit.
GY-DV5100U (NTSC) DV Camcorder (DV input/output) GY-DV5100E (PAL) DV Camcorder (DV output only) GY-DV5101E (PAL) DV Camcorder (DV input/output)
These 1/2" 3-CCD camcorders with new 12-bit ADC and 24-bit DSP offer outstanding camera signal resolution of more than 800 TVL. Superior performance plus full professional specs and functions make these camcorders the new standard for professional image acquisition.
Professional specifications
Next generation 12-bit ADC* and 24-bit DSP**
With an all-in-one DSP that incorporates a new12-bit ADC and a 24-bit DSP, signals converted by the ADC go straight to the DSP, eliminating any signal degradation that might otherwise be generated by analog circuits. This highly integrated system on chip has 5 million gates, uses 0.13 -pitch CMOS process technology and includes edge enhancement technology to achieve detail reproduction of the highest precision. The result is extraordinarily clear and vivid picture reproduction with outstanding high-definition detail enhancement and improved S/N. This enhancement level can be adjusted to suit the users preference.
*ADC: Analog Digital Converter **DSP: Digital Signal Processor

F13 at 2000 lx

The ultra-sensitive camera (F13 at 2000 lx) assures effortless shooting in extreme low light situations. This powerful feature increases creative flexibility and simplifies lighting requirements. The camera head has extra-high effective resolution of 800 TVL.

New Detail Enhancement

The user is able to select the detail frequency from the 3 pre-set positions of Low, Mid and High, according to the application and requirements to optimize the image sharpness.

16:9 squeeze (Anamorphic Compression Mode)
Now you can shoot in either 16:9 or 4:3 format at the touch of a button. 4:3 pictures are converted electronically to 16:9, eliminating the need for an anamorphic lens.

Super Low Noise

The newly developed DSP has the effect of increasing the S/N ratio at 64 dB (NTSC), 62 dB (PAL), 2 dB better than previous model, enhancing the picture quality by having significantly improved clarity and even more accurate color reproduction.
Wide dynamic range of 400% or more
The GY-DV5100's super-fast multi-stream parallel processing DSP creates an ultra-smooth gamma curve, which is calculated using a true log scale algorithm. The result is a dynamic range of over 400% that accurately reproduces fine details and colors in both shadowed and highlighted areas.
3-CCD camera for high-quality picture
To ensure the best possible image quality, the GY-DV5100 incorporates three 1/2" 410,000* (NTSC)/470,000** (PAL) pixel CCDs. Each CCD is equipped with highly advanced circuitry that virtually eliminates vertical smear when shooting bright lights against a dark background. Lag and image burn are also reduced to indiscernible levels.
*380,000 effective **440,000 effective
1/2" bayonet lens mount
The GY-DV5100 uses a standard professional 1/2" bayonet lens mount, making it compatible with the widest selection of broadcast and professional lenses. No adapters, no hidden costs. Just a smart way to tap the rich infrastructure of interchangeable professional lenses.

Professional functions

Full Auto Shooting
In an emergency, or when it's not possible to pause to adjust white 0.4 lx 3 lx 24 lx 2,000 lx 18,000 lx balance or change the gain, the Full Auto Shooting mode provides point-and-shoot ease of operation, leaving you simply to zoom, focus, and press the LoLux ALC Automatic Iris EEI record button. Activating Full Auto Shooting puts the camera in the Auto Iris mode, even if the lens is set to manual. Automatic Video Level Control (ALC) is also activated, along with Extended Electronic Iris (EEI) which provides both variable gain and variable shutter and Full Auto White to follow color temperature. This means you can shoot continuously from dark to bright, from indoors to outdoors, without changing gain, iris, white balance or ND filter.

GY-DV5100 Lux Range

F1.4 F2.0 F2.8 F4.0 F5.6 F8.0 F11 F16 1/60 1/120 1/240 (NTSC) 1/50 1/100 1/200 (PAL)

LOLUX 0.2 lx (F1.4)

When activated, the LOLUX mode increases sensitivity with almost no increase in noise. LOLUX increases the gain by +36 dB so you can capture high-quality video footage with excellent color balance, enhanced gradations, and minimal color smear even in low-light conditions.

Various audio-related functions
When color bars are output, audio reference level (test tone) is also output. The audio reference level can be set to -12 dB or -20 dB as required. In addition, a "wind cut" function is provided to minimize extraneous noise picked up by the microphone.
Versatile, user-friendly design

Direct dock to DR-DV5000

The DV select switch on the rear allows you to dock a DR-DV5000 removable hard disk drive without having to use a DV cable.

Color matrix

A sophisticated six-axis color matrix circuit effectively compensates optics-related color reproduction to ensure more natural, true-to-life tones. Five color matrix presets (Standard/Warm/Extra1/Extra2/Extra3) are provided to give you more creative control over the look and feel of your images.
Two external rear audio connectors
Two XLR connectors on the rear panel, as well one on the front, enable flexible audio input from multiple sources such as a shotgun microphone plus wireless microphone.
Tri-mode 2.5-inch LCD display
The 200,000-pixel 2.5" color TFT LCD monitor provides a high-resolution 440 TVL image during shooting or playback. Its peaking adjust function allows quick, effortless focusing. A push button selects three display modes: 1. Video only 2. Video images with text information overlay including time, status, mode, and other data are shown on the screen. 3. Data information only including time, status, mode, and other data are shown on the screen (see example in paragraph below).
Standard Anton Bauer Gold Mount (NTSC model only)
This camera is compatible with any Gold Mount battery such as Dionic, HyTRON, ProPac and Trimpac. With the VTR trigger button, the camera mounted light turns on or off automatically (this function is switchable). In addition, communication between the Anton Bauer battery and the GY-DV5100 through QR-JVC-Digi bracket makes possible an interactive viewfinder fuel gauge that shows the exact battery remaining capacity as a percentage and camera usable time as minutes.
Optional 1.5-inch CRT black & white viewfinder
The viewfinder can be moved forwards or backwards and can be adjusted for left or right eye shooting, so it is comfortable for any operator. Peaking is optimized to make focusing easy at all times.
Functions and switch layout for professionals
On-shoulder type with soft shoulder pad
For smooth, stable shooting, the GY-DV5100 has been designed for on-shoulder shooting and comes with an advanced soft shoulder pad that will not slip regardless of the type of clothing or the fabric.

Scan mode

In addition to the Full Auto Shooting to handle difficult or variable lighting environments, the GY-DV5100 is equipped with an array of pro-level functions that provide professionals with the creative flexibility they need. These include soft detail correction, Skin Tone Detection, fully adjustable gamma, Iris over/under Black Stretch/Compress, Frame Mode, etc. The GY-DV5100's switches have also been arranged in the way that most professionals are accustomed to, making operation more intuitive, precise, easy, and error-free. Since you won't have to "re-learn" how to use this camcorder all over again, the GY-DV5100 is the ideal camera for any assignment. It is possible to select between video or "Hi Res Frame Mode" for a more cinematographic effect.

Other features

External light trigger function Time/date recording Black stretch/black compress Full Auto White (FAW) Spot L/Back L Detail correction Detail V/H balance Skin detail detection White clip select Knee point select 7.5 IRE setup ON/OFF (GY-DV5100U only) Locked audio (16-bit, 48 kHz only) ACCU-FOCUS Automatic level control (ALC) System file selection Smooth transition mode Variable, slow shutter Built-in color bar Gamma control Auto black level Zebra pattern (4-step) Auto knee Highlight chroma processing SMPTE/EBU time code generator Blank search Edit search Adaptable to Sony-style tripod base
DR-DV5000 Removable Hard Disk Drive incorporating the latest DTE (Direct-to-Edit) technology
Connects directly to full-size Professional DV camcorder
DR-DV5000 has been designed specifically to dock with your GY-DV5100 series camcorder. The DR-DV5000 module sits between the rear of the camcorder and the battery. One battery is capable of powering the camcorder and the DR-DV5000 recorder with its FireWire disk drive. Interfacing the GY-DV5100 with the DR-DV5000 is done with the DV select switch, allowing the internal transfer of video, audio, timecode and control information.
Integrated with camcorder and disk drive operation
When used with the GY-DV5100, it is possible to control record and record pause of DR-DV5000 from the camcorder. Timecode generated by the camcorder can be recorded to file on the disk using DR-DV5000. DR-DV5000 status and other information appears in the viewfinder.

Long record times

Extend your GY-DV5100 uninterrupted record time by hours. For example, an 80GB FireWire drive internally provides over 6 hours of DV video! It is also possible to daisy chain up to four external FireWire drives of varying sizes to DR-DV5000 enabling incredibly long durations of uninterrupted recording.
Flexible disk drive options
DR-DV5000 uses removable drives making it possible to simply swap out drives so the editor can get to work sooner while the camera operator continues to shoot. Internal buffer memory and shock proofing ensures worry-free operation. Additionally virtually any external FireWire disk drive can be connected to DR-DV5000 via the standard 6-pin FireWire port.
LCD display and playback modes
DR-DV5000 features a detailed LCD which displays system mode, timecode, and disk space remaining. When using a GY-DV5100, it is possible to preview clips in the GY-DV5100's viewfinder or LCD panel or on an external monitor by using DR-DV5000's playback mode. Functions include record, play, pause, stop, forward index, back index and multi speed fast forward and rewind.
*Preview clips on the viewfinder or the LCD panel is not possible on the GY-DV5100E.

Image pickup device: 1/2" interline-transfer CCDs Color separation optical system: F1.4, 3-color separation prism Number of pixels: Total: 410,000 (NTSC)/470,000 (PAL) Effective: 380,000 (NTSC)/440,000 (PAL) Color system: GY-DV5100U (NTSC), GY-DV5100E (PAL) (wideband R-Y, B-Y encoder) Color bars: SMPTE/EBU type Sync system: Internal sync (built-in SSG) Lens mount: 1/2" bayonet system Optical filter: 3200K, 5600K, 5600K+1/8ND, 5600K+1/64ND Sensitivity: F13, 2000 lx Minimum illumination: 0.2 lx with F1.4, LOLUX Horizontal resolution: 800 lines S/N: 64dB (camera head, no output:GY-DV5100U) : Effective value 62dB (camera head, no output:GY-DV5100E) : Effective value Gain: -3, 0, 6, 9, 12, 15, 18 dB, variable gain (0.2 dB-step) in ALC and LOLUX Electronic shutter: Standard value: 59.94 Hz (GY-DV5100U)/50 Hz (GY-DV5100E) Fixed values: 7.5, 15, 30, 100, 250, 500, 1,000, 2,000, 4,000, 10,000 Hz (GY-DV5100U) 6.75, 12.5, 25, 120, 250, 500, 1,000, 2,000, 4,000, 10,000 Hz (GY-DV5100E)

[Video]

Video signal recording format: 8-bit, 13.5 MHz, 4:1:1 (NTSC)/4:2:0 (PAL) component recording

[Audio]

Audio signal recording format: 16-bit (locked audio), 48 kHz PCM for 2 channels or 12-bit, 32 kHz PCM for 4 channels Frequency response: 20 Hz to 20 kHz (48 kHz mode) Video output: 1.0 V(p-p), 75 ohms, unbalanced (BNC) (composite video signal) Y/C output: Y; 1 V (p-p), 75 ohms, unbalanced C; 0.286 V (NTSC)/0.3 V (PAL) (p-p), 75 ohms, unbalanced (4-pin) Audio inputs Mic: -60 dBs, 3 kohms, balanced (XLR), +48 V output for phantom power supply Line: +4 dBs, 10 kohms, balanced (XLR) Audio outputs: -6 dBs, low impedance, unbalanced (RCA) Earphone jack: -17 dBs to -60 dBs, 8-ohm impedance (stereo sound mini-jack) DV connector: 4-pin

249 (9-13/16")

[Connectors]
305 (12-1/16") 364 (14-3/8")

[Accessories provided]

Microphone x 1 Tripod base x 1

Optional Accessories

VF-P400*
4" viewfinder *For attachment, the KA-A40/SA-K400** adapter is required. **U.S.A. market only

VF-P115B

1.5" viewfinder

VF-P116

S14 x 7.3B12U

14:1 power zoom lens

AA-P250 YH16 x 7K12U
16:1 power zoom lens AC power adapter/charger
Provided with a camera power cable. *Can be used only as an AC power adapter.

S17 x 6.6BRM

17:1 power zoom lens

S20 x 6.4B12U

20:1 power zoom lens

(Fujinon)

YH19 x 6.7K12U

19:1 power zoom lens

(Canon)

MV-P615U MV-P618U

Microphone

HZ-ZS13BU

Zoom servo/trigger control (Fujinon/Canon lenses)

HZ-FM13U KA-A50U

Microphone holder Manual focus control for Fujinon lens (excluding S14 lens)

HZ-FM15U

Manual focus control for Canon lens

TP-P300U

Tripod
M-DV63PRO M-DV60ME M-DV30ME

MiniDV tapes

Shoulder Strap SC46310-001 x 2pcs.

TP-P205

SC46311-001 x 2pcs.

Spacer

VC-VDV204 (4p-4p, 2 m) VC-VDV206 (4p-6p, 2 m) DV cable

M-DV12CL

MiniDV cleaning tape
LA-DV276PRO LA-DV186PRO LA-DV124PRO

Standard DV tapes

VC-G30U Y/C cable

(4p-4p, 3 m)

SCV2933-001
Shoulder Strap (available from JVC service parts center)

VC-G50U Y/C cable

(4p-4p, 5 m)

VC-P710U

Commercially-available options

From IDX

Camera power cable (4p-4p, 5 m)

From Anton Bauer

JL-2PLUS
Quick charger with AC adapter

NH-100AB NH-202

NP battery dual holder NP box with Anton Bauer mount

Dionic 80

X-LiteII
Light for ENG Digital lithium ion battery 80 W/h

NP-L50 type batteries

(For NP-L50 type batteries. This can be also used as a camera power supply)

Titan Twin

Battery charger

UL2-20

Ultralight camera
BR-DV3000U (NTSC) DV Recorder BR-DV3000E (PAL) DV Recorder
The BR-DV3000 is a simple, no-frills recorder/player with a compact and stylish design that can be installed horizontally or vertically.
System flexibility with various interfaces

NTSC/PAL compatibility

Switch between NTSC or PAL as required. This makes it easy to work with internationally sourced material and transfer it to a non-linear system for editing. You can also record to Standard DV or Mini DV tape in either NTSC or PAL system.
*Cannot be used as an NTSC/PAL converter. The BR-DV3000 can record and play back signals in both NTSC and PAL formats.

User-friendly design

Audio indicator
This indicator lights whenever audio signals are input. Also, it provides a convenient way to check for the presence of the audio signals during tape playback.
Wireless/wired remote control
Connecting the optional RM-G30 controller to the REMOTE connector enables you to control BR-DV3000 operations from a distance. There's also a wireless remote control that provides control over field advance (1st/2nd), frame advance, menu display, audio reference level selection (-20 dB or -12 dB, in the Playback mode only), color bar display and blank search, as well as in addition to basic operations.

Wireless remote control (provided)
Y/C input/output and composite input/output
In addition to DV input/output, the BR-DV3000 is equipped with the Y/C input/output and composite input/output.

RS-422A interface

As the BR-DV3000 is equipped with an industry-standard RS-422A interface, DV source material can be transferred to a variety of formats for editing.
*The BR-DV3000 can be used as a player when connected to the RM-G820. It cannot be used as a recorder.
20x high-speed time code search/blank search
The built-in time code generator provides preset (rec run) and regene time codes. In combination with the 20x search function (100x max. in the FF or REW mode), this provides super-fast access to any target point on the tape with visible pictures.
DVCAM playback capability
DVCAM recordings can be played back directly on the BR-DV3000. This makes it easy to use DVCAM recordings as source material for editing.

Continuous recording

When a camcorder is connected to the BR-DV3000 via the DV connector, the BR-DV3000 will start recording 5 minutes GY-DV5100 BR-DV3000 before the tape in the camcorder ends. This enables continuous shooting for extended periods with no breaks in the recording.

OPERATE EJECT

EDITSEARCH

MONITOR

FILTER
1 3200K 2 5600K 1/ 8 ND.3 5600K.4 5600K 1/64 ND

SHUTTER

STATUS

LCD BRIGHT

DISPLAY

AUDIO LEVEL

AUTO IRIS

FULL AUTO

FRONT REAR

PULL OPEN

CH-1AUDIO

BACK L NORMAL SPOT L

STRETCH NORMAL COMPRESS
CH-2 IN AUDIO SELECT CH-1 CH-2 AUTO MANUAL

DV-cable

DVCAM NTSC

PAL REC INH.

CH-1/3 CH-2/4

REMOTE SEL.

SERIAL

INPUT SEL.

SET FF

9PIN WIRELESS

BR-DV3000

VIDEO CASSETTE RECORDER

Built-in auto error correction system
This system operates on a frame-by-frame basis to ensure accurate error compensation under any conditions, enabling consistent suppression of block noise and reliable, professionalstandard performance at all times.

Repeat playback

When the video signal ends or tape ends, playback starts again from the beginning of the recorded video or tape (video end repeat/tape end repeat).

Closed caption (NTSC only)
A closed caption signal can be recorded and played back through analog interface.

Vertical operation

The new tape mechanism is compatible with either vertical or horizontal operation, making it easy to install the compact BR-DV3000 in a narrow space or close to a non-linear system.

Application

Non-linear editing system
Materials recorded on a Standard or Mini DV tape can be transferred to the non-linear system via the DV interface. After you finished the editing on your non-linear system, signals can be directly transferred to this VTR for Monitor BR-DV3000 archiving. Non-linear editing
OPERATE EJECT MLNU A.DUB REC PLAY PAUSE

DVCAM NTSC PAL REC INH.

On-screen menu
Systematic, easy-to-understand menu screens simplify setting and operation procedures. Menu setting can be done using either the buttons on the front panel or the wireless remote control.

system

Versatility
1/3 noiseless slow motion
Noiseless slow-motion playback is possible between -1/3 and +1/3.

Related equipment

TC duplication mode
Time code signals input from the DV connector can be recorded.

RM-G30U

Remote control unit (Cable length: 2 m)

RM-G820

RS-422A editing controller

GY-DV300

1/3" 3-CDD DV camcorder

VC-G9050U

Lock audio (16-bit, 48 kHz only) Audio dubbing Microphone connector Time code reader/generator Contact closure recording Variable speed search DV recording on DVCAM tape 7.5 IRE setup ON/OFF
VC-VDV204 (4p-4p, 2 m) VC-VDV206 (4p-6p, 2 m)

DV cable

9-pin remote cable

VC-G30U VC-G50U

Y/C cable (4p-4p, 3 m) Y/C cable (4p-4p, 5 m)
M-DV63PRO M-DV60ME M-DV30ME M-DV12CL
MiniDV tapes MiniDV cleaning tape

174 (6-7/8")

68 (2-11/16")
Power requirements: DC 12 V (from provided 12 V, 3.5 A AC adapter) Power consumption: Approx. 14 W Dimensions: 174 (W) x 68 (H) x 260 (D) mm (6-7/8" x 2-11/16" x 10-1/4") Weight: Approx. 2.5 kg (5.5 lbs.) Temperature Operating: 5C to 40C (41F to 104F) Storage: -20C to 60C (-4F to 140F) Humidity Operating: 30% to 80% RH Storage: 85% RH or less Format: DV format (SP mode only. Not compatible with the LP mode.) Signal format: NTSC/PAL Usable tape: Standard/Mini DV tape Tape width: 6.35 mm Tape speed: 18.812 mm/s (NTSC)/18.831 mm/s (PAL) Record/play time: 276 minutes (with LA-DV276PRO tape), 63 minutes (with an M-DV63 tape)

Video signal recording format: 8-bit, 13.5 MHz, 4:1:1 (NTSC)/4:2:0 (PAL) Video inputs Analog composite: 1.0 V (p-p), 75 ohms (RCA) Analog Y/C: Y: 1.0 V (p-p), 75 ohms C: 0.286 V (NTSC)/0.3 V (PAL) (p-p), 75 ohms (4-pin) Video outputs Analog composite: 1.0 V (p-p), 75 ohms (RCA) Analog Y/C: Y: 1.0 V (p-p), 75 ohms C: 0.286 V (NTSC)/0.3 V (PAL) (p-p), 75 ohms (4-pin)
Audio signal recording format: 16-bit (Locked Audio), 48 kHz for two channels or 12-bit, 32 kHz PCM for four channels Frequency response: 20 Hz to 20 kHz (16 bits) Audio inputs Line: -8 dBs, 10 kohms, unbalanced (RCA) Mic: -60 dBs, 3 kohms, unbalanced (mini jack) Audio output Line: -8 dBs, 1 k-ohm, unbalanced (RCA)
IEEE 1394 interface: 4-pin RS-422 interface: D-sub 9-pin

[Accessories]

Wireless remote control unit x 1 AC adapter x 1 AC cable x 1 Stand x 1

MIC REMOTE SEL.

SERIAL 9PIN WIRELESS

CH-1/3 INPUT SEL.

REW CH-2/4

260 (10-1/4")

BR-DV6000U (NTSC) DV Recorder with Editing Function BR-DV6000E (PAL) DV Recorder with Editing Function
With professional editing functions such as an RS-422A interface, insert/assemble editing, capstan bump and preview, the BR-DV6000 makes an excellent choice for fast, accurate tape-to-tape editing. This versatile player-recorder is equally well-suited to operation within a non-linear editing system thanks to a comprehensive set of digital and analog interfaces. A wide range of options makes the BR-DV6000 the right choice for professional studio needs.
Professional linear editing system
The BR-DV6000s industry-standard RS-422A interface allows you to transfer DV source material to a variety of formats for editing, as well as permitting operation of the BR-DV6000 from a remote controller.
NTSC/PAL playback capability
Both NTSC and PAL signals can be played back. This makes it easy to work with internationally sourced material and transfer it to a non-linear editing system for editing. When signals are input via the DV input, both types of signal can be recorded to Standard or Mini DV tape in either NTSC or PAL system.
*Cannot be used as an NTSC/PAL converter. BR-DV6000U: Signals input via the analog input cannot be recorded in PAL format. BR-DV6000E: Signals input via the analog input cannot be recorded in NTSC format.

0 frame accurate editing with capstan bump function
To ensure 0 frame editing accuracy, a capstan bump function is provided. This can be used to synchronize the player and the recorder with both units controllable via the RS-422A interface.

JVC bus interface

Compatible with the RM-G800 remote controller for JVC's popular S-VHS Edit-Desk series, this interface allows analog signals to be transferred from this VTR to the S-VHS VCR for editing or dubbing.
Preview function with PB/EE switch at edit point
The BR-DV6000 can execute an editing controllers preview function, enabling you to switch between the PB and EE modes to check pictures at the edit point before editing. When you are using the BR-DV6000 as a recorder, this allows you to check the edit point on the recorder before actual editing.
Optional professional-standard XLR balanced audio boards
High-performance XLR balanced audio connectors are optionally available to ensure professional-standard audio reception and transmission quality. Either the input or output board can be used. Both boards cannot be used simultaneously.

Insert/assemble editing

The BR-DV6000 is equipped with basic editing functions such as audio/video insert and assemble editing. Video signals and/or audio signals (CH1 and CH2) can be assembled or inserted. A capstan bump function is also provided for frame editing with enhanced quality.
2.5" color LCD monitor
The high resolution 2.5" color LCD display on the front panel provides monitoring and editing convenience. Video plus data including Time Code, audio level meter, menu setting, and mode are shown.
20x high-speed search/blank search
The 20x search function (100x max. in the FF or REW mode) provides superfast access to any target point on the tape. It also makes it easy to cue up non-recorded positions on the tape.
SDI output accessory SA-X65
An optional accessory is plug-in SDI output board, SA-X65, providing serial digital video with embedded audio and AES/EBU digital audio.
This system operates on a frame-by-frame basis to ensure accurate error compensation under any conditions, enabling consistent suppression of block noise and reliable, professional-standard performance at all times.
DVCAM recordings can be played back directly on the BR-DV6000. This makes it easy to use DVCAM recordings as source material for editing.

Slot for optional board

Notes:

BR-DV6000 BR-DV6000

OPERATE OPERATE REC PLAY PAUSE MENU DISP INDEX+ EJECT MIC [PRESET] HOLD BLANC CUE UP REW STOP FF MIC [PRESET] HOLD BLANC CUE UP INDEXSET INDEX+ EJECT REW STOP FF RESET A. DUB

Simplified digital editing system
Using two BR-DV6000s and the RM-G820 remote controller,digital editing system can be set up.

Monitor

MENU DISP INDEXSET

A. DUB

BR-DV6000

REC LEVEL

COUNTER CTL TC UB
AUDIO MONITOR OUTPUT L MIX R CH-1/2 MIX CH-3/4

INPUT SERECT DV

REMOTE

CH-1/2

CH-2/4

LINE Y/C [CPN]

Monitor Remote RM-G820 Remote
CH1 and CH2 audio signals cannot be edited independently in the 48 kHz mode. In the 32 kHz mode, only analog signals can be edited independently for CH1/CH2 and CH3/CH4. Preview is not available when the JVC bus editing controller (RM-G800/ RM-G805) is used. For best results in editing, use tapes self recorded on the BR-DV6000.

Options

SA-X61

Audio XLR input

SA-X62

Audio XLR output

SA-X65

SDI output board

* The SA-DV6000, SA-X61 and SA-X62 cannot be used at the same time. Choose one from these three boards.

RM-G800

JVC bus editing controller
OPERATE MENU DISP INDEXSET [PRESET] HOLD BLANC CUE UP INDEX+ EJECT MIC REW STOP FF RESET A. DUB

88 (3-1/2")

VC-G9050U VC-G30U VC-G50U
9-pin remote cable (5 m) Y/C cable (4p-4p, 3 m) Y/C cable (4p-4p, 5 m)

VC-VDV204

DV cable (4p-4p, 2 m)

LINE Y/C [CPN] LOCAL

212 (8-3/8")

327 (12-7/8")

VC-VDV206

DV cable (4p-6p, 2 m)

Power requirements: DC 12 V (from provided 12 V, 5 A AC adapter) Power consumption: Approx. 38 W Dimensions: 212 (W) x 88 (H) x 327 (D) mm (8-3/8" x 3-1/2" x 12-7/8") Weight: Approx. 4.5 kg (9.9 lbs.) Temperature Operating: 5C to 40C (41F to 104F) Storage: -20C to 60C (-4F to 140F) Humidity Operating: 30% to 80% RH Storage: 85% RH or less Format: DV format (SP mode only. Not compatible with the LP mode.) Signal format: NTSC/PAL Usable tape: Standard/Mini DV tape Tape width: 6.35 mm Tape speed: 18.812 mm/s (NTSC)/18.831 mm/s (PAL) Record/play time: 276 minutes (with LA-DV276PRO tape), 63 minutes (with an M-DV63 tape)
Video signal recording format: 8-bit, 13.5 MHz, 4:1:1 (NTSC)/4:2:0 (PAL) Video inputs (BNC) Analog composite: 1.0 V (p-p), 75 ohms Analog Y/C: Y: 1.0 V (p-p), 75 ohms C: 0.286 V (NTSC)/0.3 V (PAL) (p-p), 75 ohms Analog component (BNC): Y: 1.0 V (p-p), 75 ohms R-Y/B-Y: 0.7 V (p-p), 75 ohms External sync input: 0.3 V (p-p), 75 ohms Video outputs Analog composite: 1.0 V (p-p), 75 ohms Analog Y/C: Y: 1.0 V (p-p), 75 ohms C: 0.286 V (NTSC)/0.3 V (PAL) (p-p), 75 ohms Analog component (BNC): Y: 1.0 V (p-p), 75 ohms R-Y/B-Y: 0.7 V (p-p), 75 ohms